TPS
5 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
5 products
Key
- set apart: test bar not described as printed, or no stated load
- not published
How the numbers are worked out
BASF Forward AM Ultrafuse TPS 90AStrength XY, MPa7Strength Z, MPa2Modulus XY, GPa0.054Price, CAD/kg—Nozzle, °C260–280Bed, °C70–90Chamber, °C—Drying, °C, hnone
BASF Forward AM Ultrafuse TPS 90ABASF Forward AM
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BASF Forward AM, Ultrafuse TPS 90A18 values | |||
| Tensile modulus XY | 54 MPap. 3: Young’s Modulus ISO 527 | ISO 527print settingsPrint direction Standard | in the median |
| Tensile modulus Z | 37 MPa / 5.4 ksip. 3: Young’s Modulus | ISO 527 | in the median |
| Tensile break strength Z (ZX) | 2 MPa / 0.3 ksip. 3: Stress at Break, TPE ISO 527 (ZX, Upright) | ISO 527print settingsPrint direction ZX, Upright | in the median |
| Elongation at break XY | 280 %p. 3: Strain at Break, TPE ISO 527 | ISO 527print settingsPrint direction Standard | in the median |
| Elongation at break Z (ZX) | 9 %p. 3: Strain at Break, TPE ISO 527 (ZX, Upright) | ISO 527print settingsPrint direction ZX, Upright | in the median |
| Charpy impact strength ZX | 14.1 kJ/m²p. 3: Impact Strength Charpy (notched) @ -30°C | ISO 179As the sheet prints it: ISO 179-2 | not in the median: tested below room temperature |
| Hardness | 89 Shore Ap. 2: Shore A Hardness (3s) | ISO 7619As the sheet prints it: 3s ISO 7619-1 | in the median |
| Hardness | 29 Shore Dp. 2: Shore D Hardness (15s) | ISO 7619As the sheet prints it: 15s ISO 7619-1 | in the median |
| Tear strength XY | 10 kN/mp. 3: Tear Strength ISO 34-1 | ISO 34As the sheet prints it: ISO 34-1print settingsPrint direction Standard | |
| Abrasion loss orientation not stated | 111 mm3p. 2: Abrasion Resistance | ISO 4649 | |
| Compression set orientation not stated | 75 %p. 2: Compression Set at 23°C, 72 h | ISO 815As the sheet prints it: 23°C 72 h ISO 815-1 | |
| Compression set orientation not stated | 93 %p. 2: Compression Set at 70°C, 24 h | ISO 815As the sheet prints it: 70°C 24 h ISO 815-1 | |
| Tensile stress at 100 % elongation XY | 5.4 MPa / 0.8 ksip. 3: Stress at 100% Elongation | ISO 527 | |
| Tensile stress at 200 % elongation XY | 6.2 MPa / 0.9 ksip. 3: Stress at 200% Elongation | ISO 527 | |
| Glass transition temperature | -59 °Cp. 2: Glass Transition Temperature | ISO 11357As the sheet prints it: ISO 11357-2 | |
| Melting temperature | 242-249 °Cp. 2: Melting Temperature | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1044 kg/m3p. 2: Printed Part Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Melt volume-flow rate | 19.9 cm3/10 minp. 2: Melt Volume Rate | ISO 1133 | |
| BASF Forward AM, Ultrafuse® TPS 90A (discontinued) - FORWARD AM7 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile break strength XY | 7 MPap. 1: Stress at Break (XY) | no standard stated | in the median |
| Tensile break strength ZX | 2 MPap. 1: Stress at Break (ZX) | no standard stated | not in the median: measured on a bar in another orientation |
| Elongation at break ZX | 9 %p. 1: Elongation at Break | no standard stated | not in the median: measured on a bar in another orientation |
| Tear strength XZ | 5 kN/mp. 1: Tear Strength (XZ) | no standard stated | |
| Tear strength ZX | 4 kN/mp. 1: Tear Strength (ZX) | no standard stated | |
| Abrasion loss | 111 mm3 mm³p. 1: Abrasion Resistance | specimen not stated, no standard stated | |
| Compression set | 75%p. 1: Compression set at 23°C, 72h | specimen not stated, no standard namedAs the sheet prints it: time=72 h | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 70–90 °Cown data sheet
- Heated chamber
- no setpointown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 260 – 280 °C; Bed 70 – 90 °C; Chamber -; Drying Ultrafuse® TPS 90A is in a printable condition, drying is not necessaryBASF Forward AM, Ultrafuse TPS 90Ap. 2: Recommended printing settings; p. 2: Build Chamber Temperature; p. 2: Bed Material
- Nozzle 260-280 °C; Bed 70°C - 90°C; Drying printing without pre- dryingBASF Forward AM, Ultrafuse® TPS 90A (discontinued) - FORWARD AMp. 1: Description; p. 1: Nozzle Temperature; p. 1: Bed Temperature; p. 1: Bed Material; p. 1: Nozzle Diameter
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Benefits
Ultrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material.
BASF Forward AM, Ultrafuse® TPS 90A (discontinued) - FORWARD AMp. 1: exact-product Benefits paragraph
Fillamentum Flexfill TPE 90AStrength XY, MPa> 5Strength Z, MPa—Modulus XY, GPa—Price, CAD/kg—Nozzle, °C225–245Bed, °C50–60Chamber, °C—Drying, °C, h80≥ 2 h
Fillamentum Flexfill TPE 90AFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, Flexfill TPE 90A6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile break strength orientation not stated | 5 MPap. 1: Tensile strength | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 250 %p. 1: Elongation at break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 90 Shore Ap. 1: most of substances even at higher Hardness | no standard stated | in the median |
| Hardness | 30 Shore Dp. 1: Hardness (30 Shore D) | no standard namedAs the sheet prints it: laboratory method | in the median |
| Density | 1,15 g/cm3p. 1: Material density | ISO 1183 | |
| Melt mass-flow rate | 25 g/10 minp. 1: Melt flow index | no standard stated | |
| Fillamentum, Safety Data Sheet: Fillamentum Flexfill TPE 90A2 valuesUnless a row says otherwise: specimen not stated | |||
| Melting temperature | 100–120 °Cp. 4: Melting point | no standard stated | |
| Decomposition temperature | > 200 °Cp. 4: Decomposition temperature | no standard stated | |
Print settings
- Nozzle
- 225–245 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80 °C for ≥ 2 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 225–245 °C; Bed 50–60 °CFillamentum, Flexfill TPE 90Ap. 1: Recommended printing settings; p. 1: Type of bed
- Drying 80 °C; minimum drying time 2 h; the need to dry 2 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row FLEXFILL TPE 90A; own minimum-time/temperature/need columns, with p1 restrictions
Price
Not in the price sample.
Its 4 documents
What the maker says (15)
- Benefits
The main difference caused by the very different polymer base is in chemical resistance.
Fillamentum, Flexfill TPE 90Ap. 1 - Benefits
It has chemical resistance against wide range of substances.
Fillamentum, Flexfill TPE 90Ap. 1 - Good for
This makes it perfect material for sealings of most of substances even at higher temperatures.
Fillamentum, Flexfill TPE 90Ap. 1 - Benefits
This material has very low gas permeability.
Fillamentum, Flexfill TPE 90Ap. 1 - Benefits
This filament has great flexibility.
Fillamentum, Flexfill TPE 90Ap. 1 - Adhesion between layers
High tear resistance is insured thanks to good layer adhesion.
Fillamentum, Flexfill TPE 90Ap. 1 - Surface finish
The surface of material is very pleasant to touch.
Fillamentum, Flexfill TPE 90Ap. 1 - Surface finish
Thanks to its great layer adhesion, the objects have very smooth surface.
Fillamentum, Flexfill TPE 90Ap. 1 - Surface finish
This finish is great to avoid any sticking of dirt.
Fillamentum, Flexfill TPE 90Ap. 1 - Good for
This material can be used for production of electrical and electronic equipment.
Fillamentum, Flexfill TPE 90Ap. 1 - Good for
The filament complies with the requirements for food contact applications.
Fillamentum, Flexfill TPE 90Ap. 1 - Good for
It is safe for applications in contact with skin or mucous membrane.
Fillamentum, Flexfill TPE 90Ap. 1 - Precision and tolerance
For flexible materials, Fillamentum can guarantee maximum deviation of diameter +/- 0,10 mm.
Fillamentum, Flexfill TPE 90Ap. 1 - Precision and tolerance
During the production, filament is made with the best stability of diameter, roundness and colour.
Fillamentum, Flexfill TPE 90Ap. 1 - Printing advice
Use brim for better bed adhesion.
Fillamentum, Flexfill TPE 90Ap. 1
Fillamentum Flexfill TPE 96AStrength XY, MPa> 5Strength Z, MPa—Modulus XY, GPa—Price, CAD/kg—Nozzle, °C225–245Bed, °C50–60Chamber, °C—Drying, °C, h80≥ 2 h
Fillamentum Flexfill TPE 96AFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, Flexfill TPE 96A6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile break strength orientation not stated | 5 MPap. 1: Tensile strength | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 150 %p. 1: Elongation at break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 96 Shore Ap. 1: most of substances even at higher Hardness | no standard stated | in the median |
| Hardness | 40 Shore Dp. 1: Hardness (40 Shore D) | no standard namedAs the sheet prints it: laboratory method | in the median |
| Density | 1,15 g/cm3p. 1: Material density | ISO 1183 | |
| Melt mass-flow rate | 25 g/10 minp. 1: Melt flow index | no standard stated | |
| Fillamentum, Safety Data Sheet: Fillamentum Flexfill TPE 96A2 valuesUnless a row says otherwise: specimen not stated | |||
| Melting temperature | 100–120 °Cp. 4: Melting point | no standard stated | |
| Decomposition temperature | > 200 °Cp. 4: Decomposition temperature | no standard stated | |
Print settings
- Nozzle
- 225–245 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80 °C for ≥ 2 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 225–245 °C; Bed 50–60 °CFillamentum, Flexfill TPE 96Ap. 1: Recommended printing settings; p. 1: Type of bed
- Drying 80 °C; minimum drying time 2 h; the need to dry 2 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row FLEXFILL TPE 96A; own minimum-time/temperature/need columns, with p1 restrictions
Price
Not in the price sample.
Its 4 documents
What the maker says (15)
- Benefits
The main difference caused by the very different polymer base is in chemical resistance.
Fillamentum, Flexfill TPE 96Ap. 1 - Benefits
It has chemical resistance against wide range of substances.
Fillamentum, Flexfill TPE 96Ap. 1 - Good for
This makes it perfect material for sealings of most of substances even at higher temperatures.
Fillamentum, Flexfill TPE 96Ap. 1 - Benefits
This material has very low gas permeability.
Fillamentum, Flexfill TPE 96Ap. 1 - Benefits
The toughness of objects printed with 100% infill is similar as in case of Flexfill TPU.
Fillamentum, Flexfill TPE 96Ap. 1 - Surface finish
The surface of material is very pleasant to touch.
Fillamentum, Flexfill TPE 96Ap. 1 - Adhesion between layers
Thanks to its great layer adhesion, the objects have very smooth surface.
Fillamentum, Flexfill TPE 96Ap. 1 - Surface finish
This finish is great to avoid any sticking of dirt.
Fillamentum, Flexfill TPE 96Ap. 1 - Good for
This material can be used for production of electrical and electronic equipment.
Fillamentum, Flexfill TPE 96Ap. 1 - Good for
The filament complies with the requirements for food contact applications.
Fillamentum, Flexfill TPE 96Ap. 1 - Precision and tolerance
For flexible materials, Fillamentum can guarantee maximum deviation of diameter +/- 0,10 mm.
Fillamentum, Flexfill TPE 96Ap. 1 - Precision and tolerance
During the production, filament is made with the best stability of diameter, roundness and colour.
Fillamentum, Flexfill TPE 96Ap. 1 - Printing advice
Workability of 3D printing filament is at least 12 months from delivery.
Fillamentum, Flexfill TPE 96Ap. 1 - Printing advice
Use brim for better bed adhesion.
Fillamentum, Flexfill TPE 96Ap. 1 - Printing advice
Try your own settings before printing.
Fillamentum, Flexfill TPE 96Ap. 1
Fabru Thermoplastic styrene block copolymer elastomer (TPS)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa0.011Price, CAD/kg—Nozzle, °C210–240Bed, °C60–80Chamber, °C60–80Drying, °C, h80
Fabru Thermoplastic styrene block copolymer elastomer (TPS)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Thermoplastic styrene block copolymer elastomer (TPS)5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 11 MPap. 1: Tensile modulus (ISO 37) | ISO 37 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 650 %p. 1: Elongation at break (ISO 37) | ISO 37 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 110 °Cp. 1: Heat deflection temperature 0.45 MPa | no standard namedAs the sheet prints it: 0.45 MPa | |
| Density | 1.22 g/cm3p. 1: Density (ISO 1183 1A) | ISO 1183As the sheet prints it: 1A ISO 1183 | |
| Mould shrinkage orientation not stated | 1 %p. 1: Shrinkage | no standard stated | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- 60–80 °Cown data sheet
- Drying
- 80 °Cown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-240 °C; Bed 60-80 °C; Chamber 60-80 °C; Drying 80 °CFabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1: Heated bed temperature; p. 1: Build chamber temperature; p. 1: Drying temperature; p. 1: Printing temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (13)
- Benefits
TPS is an elas+c material that is characterized by a pleasant feel and good mechanical proper+es.
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Good for
It has a high rese>ng force and is par+cularly flexible, making it ideal for applica+ons where rubber-like elas+city is required.
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Benefits
TPS shows good resistance to weather condi+ons and many chemicals and is also skin-friendly, which is oFen used in medical technology and consumer goods.
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Benefits
In FDM 3D prin+ng, TPE-S convinces with its good adhesion to other plas+cs, especially on other styrene-based plas+cs, which also makes it interes+ng for dual extrusion prin+ng.
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Printing advice
As with other flexible materials, the smaller the filling and the thinner the wall thickness, the more elas+c the printed component remains.
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Benefits
TPS offers a balanced combina+on of flexibility, adhesion and printability for a variety of applica+ons.
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Benefits
high elas+city
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Benefits
high reseXability
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Benefits
well suited for dual extrusion
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Surface finish
non-slip surface
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Surface finish
pleasant feel
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Pitfalls and limitations
Only printable with Direct Drive extruder
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1 - Pitfalls and limitations
low print speed
Fabru, Thermoplastic styrene block copolymer elastomer (TPS)p. 1
eSUN TPE 83AStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Price, CAD/kg55Nozzle, °C220–250Bed, °C45–60Chamber, °C—Drying, °C, h55≥ 4 h
eSUN TPE 83AeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, eLastic Technical Data Sheet3 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 32 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 420 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Density | 1.14 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220 - 250℃; Bed 45 - 60°C; Drying 55℃/> 4heSUN, eLastic Technical Data Sheetp. 2: Recommended printing settings; p. 2: Footnote
Price
55 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 55 CAD/kgeSun eLastic TPE-83A Flexible Filament 1.75mm 1kg / White (SKU ESUN-FL-ELST-TPE83A-1.75-1KG-WHT)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (18)
- Good for
Shoes materials
eSUN, eLastic Technical Data Sheetp. 1: Applications, six bullets, published bullet/heading 1 - Good for
Automobile
eSUN, eLastic Technical Data Sheetp. 1: Applications, six bullets, published bullet/heading 2 - Good for
Running piping
eSUN, eLastic Technical Data Sheetp. 1: Applications, six bullets, published bullet/heading 3 - Good for
Machinery
eSUN, eLastic Technical Data Sheetp. 1: Applications, six bullets, published bullet/heading 4 - Good for
Electric products
eSUN, eLastic Technical Data Sheetp. 1: Applications, six bullets, published bullet/heading 5 - Good for
Sporting goods
eSUN, eLastic Technical Data Sheetp. 1: Applications, six bullets, published bullet/heading 6 - Benefits
Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling,also low surface friction.
eSUN, eLastic Technical Data Sheetp. 1 - Surface finish
Matte surface effect
eSUN, eLastic Technical Data Sheetp. 1 - Benefits
Sturdy and durable
eSUN, eLastic Technical Data Sheetp. 1 - Benefits
High impact resistance
eSUN, eLastic Technical Data Sheetp. 1 - Surface finish
Skin-friendly feel
eSUN, eLastic Technical Data Sheetp. 1 - Benefits
High elasticity
eSUN, eLastic Technical Data Sheetp. 1 - Benefits
Flexible and soft
eSUN, eLastic Technical Data Sheetp. 1 - Benefits
High tenacity
eSUN, eLastic Technical Data Sheetp. 1 - Moisture sensitivity
it is recommended to dry the filaments (55℃/> 4h) before printing to achieve the best printing effect, and it would be better to use together with eBOX when printing.
eSUN, eLastic Technical Data Sheetp. 2 - Printing advice
It is recommended to use a short-range double-wheel deceleration extruder designed for flexibility, and eLastic materials cannot be printed by a remote extruder.
eSUN, eLastic Technical Data Sheetp. 2 - Printing advice
After a long printing time, impurities may remain in the nozzle, so it is recommended to use it with cleaning filament.
eSUN, eLastic Technical Data Sheetp. 2 - Printing advice
If necessary, pleasw replace the nozzle and throat with new ones.
eSUN, eLastic Technical Data Sheetp. 2
No product matches "".
Not published by any product: notched impact.
Values are for the colour each sheet tested; pigment can change them.