TPU harder than 95A
15 products from 13 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
15 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- hardened nozzle
- not published
How the numbers are worked out
Extrudr FLEX MEDIUM MATTStrength XY, MPa34Strength Z, MPa—Modulus XY, GPa0.12Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C50Chamber, °CnoneDrying, °C, h6012 h
Extrudr FLEX MEDIUM MATTExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TPU FLEX Medium MATT Filament – Shore Hardness A9815 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 120 MPap. 1: Tensile modulus (Young's modulus) | specimen not stated; its document points to a moulded or resin bar, ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 34 MPap. 1: Tensile strength at yield | specimen not stated; its document points to a moulded or resin bar, ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 34 MPap. 1: Tensile stress at break | specimen not stated; its document points to a moulded or resin bar, ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 420 %p. 1: Elongation at break | specimen not stated; its document points to a moulded or resin bar, ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 110 MPap. 1: Flexural modulus | specimen not stated; its document points to a moulded or resin bar, ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 98 Shore Ap. 1: Shore hardness | no standard stated | in the median |
| Abrasion loss | 26 mm³p. 1: Abrasion resistance | no standard stated | |
| Glass transition temperature | -30 °Cp. 1: Glass transition temp. (Tg) | ISO 11357As the sheet prints it: ISO 11357-1 (DSC) | |
| Vicat softening temperature | ~85 °Cp. 1: Vicat softening temp. (VST/B50) | ISO 306 | |
| Melting temperature | 193–203 °Cp. 1: Melting point (Tm) | ISO 3146As the sheet prints it: ISO 3146-C | |
| Decomposition temperature | 220 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Density | 1.18 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Water absorption | 0.8 %p. 1: Water absorption (saturation, 23°C) | no standard namedAs the sheet prints it: saturation | |
| Melt mass-flow rate | 55–80 g/10 minp. 1: Melt flow rate (MFR) — 210°C/2.16 kg | ISO 1133As the sheet prints it: ISO 1133-1 (210°C/2.16 kg) | |
| Mould shrinkage orientation not stated | 0.8–1.2 %p. 1: Mould shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATT12 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 470 N/mm²physically implausiblep. 1: Tensile strength DIN 53504, S2 N/mm² | DIN 53504As the sheet prints it: DIN 53504, S2 | not in the median: physically implausible as published |
| Tensile break strength | 52 MPap. 1: Tensile strength at break DIN 53504, S1 MPa | DIN 53504As the sheet prints it: DIN 53504, S1 | not in the median: measured on a moulded bar |
| Elongation at break | 6.9 %physically implausiblep. 1: Elongation at break DIN 53504, S2 % | DIN 53504As the sheet prints it: DIN 53504, S2 | not in the median: physically implausible as published |
| Hardness | 50 Shore Dp. 1: Shore hardness D DIN ISO 7619-1 - | ISO 7619As the sheet prints it: ISO 7619-1 | not in the median: the resin supplier's value, not a printed part |
| Tear strength orientation not stated | 110 kN/mp. 1: Tear propagation restistance | specimen not stated, ISO 34As the sheet prints it: ISO 34-1 | |
| Abrasion loss | 30 mm³p. 1: Abrasion loss | ISO 4649As the sheet prints it: ISO 4649, A | |
| Compression set | 47 %p. 1: Compression set (24h; 70°C) (DIN ISO 815-1, method A) | specimen not stated, ISO 815As the sheet prints it: DIN ISO 815-1, method A; time=24h; method=A | |
| Compression set | 30 %p. 1: Compression set (24h; 70°C) (DIN ISO 815-1, method C) | specimen not stated, ISO 815As the sheet prints it: DIN ISO 815-1, method C; time=24h; method=C | |
| Compression set | 24 %p. 1: Compression set (72h; 23°C) | specimen not stated, ISO 815As the sheet prints it: DIN ISO 815-1; time=72h | |
| Tensile stress at 10 % elongation | 15.1 MPap. 1: Stress at 10% elongation | DIN 53504As the sheet prints it: DIN 53504, S1 | |
| Tensile stress at 300 % elongation | 29 MPap. 1: Stress at 300% elongation | DIN 53504As the sheet prints it: DIN 53504, S1 | |
| Density | 1.19 g/cm³p. 1: Density ISO 1183-1 g/cm³ | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 220-250°C; Bed 50°CExtrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Adhesive
- Nozzle 220–250 °C; Bed 50 °C; Drying Drying temperature 60 °C; Drying time 12 hExtrudr, TPU FLEX Medium MATT Filament – Shore Hardness A98p. 1: Print Settings, Drying (drying only; p. 1: Surface preparation; p. 1: nozzle_diameter
Price
Not in the price sample.
Its 3 documents
What the maker says (7)
- Good for
This property gives the prints an elegant and high-quality appearance that is ideal for aesthetically demanding applications.
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1 - Benefits
Very impact and break resistant
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1 - Benefits
High flexibility and elasticity
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1 - Surface finish
Matte surface
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1 - Surface finish
FLEX Medium MATT is another member of Extrudr‘s TPU range and is characterised by the same outstanding properties as FLEX Medium, but with a matt surface.
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1 - Adhesion between layers
Extreme layer adhesion
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM MATTp. 1
Bambu Lab TPU for AMSStrength XY, MPa22.4Strength Z, MPa11.2Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg47Nozzle, °C220–240Bed, °C30–35Chamber, °C25–45Drying, °C, h708 h
Bambu Lab TPU for AMSBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMS13 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)annealed at 70 °C for 12 hAll the specimens were annealed and dried at 70 °C for 12 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 230 °C Bed Temperature 35 °C Printing Speed 130 mm/s InfillDensity 100% Allthe specimens were printed at the following settings: Nozzle Temperature = 230 °C, Printing Speed = 130 mm/s, Bed Temperature = 35 °C,InfillDensity= 100%. Allthe specimens were annealed and dried at 70 °C for12 h before testing. It'snot reco | |||
| Tensile modulus XY | 1190 ± 0.4 MPaphysically implausiblep. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | not in the median: physically implausible as published |
| Tensile modulus Z | 600 ± 0.5 MPaphysically implausiblep. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) XY | 22.4 ± 0.6 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 11.2 ± 0.5 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | > 650 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 31 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Charpy impact strength XY | 124.3 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 9.6 ±0.3 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Hardness | 68D Shore Dp. 1: Basic Info, "Shore hardness of 68D" | specimen not stated, no standard statedmoisture state not statedtreatment not statedprint settings not stated | in the median |
| Melting temperature | 183 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.26 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 1.20 %p. 2: Saturated Water | no standard namedAs the sheet prints it: 25 °C, 55% RH | |
| Melt mass-flow rate | 21.8 ± 0.3 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: flexural modulus, hdt, glass transition temperature, vicat softening temperature, crystallization temperature. | |||
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 30–35 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
- Annealing
- 70 °C for 12 hown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Bambu Lab, TPU for AMS official maker product page.
Its 2 print profiles, in the documents' words
- Nozzle 220 -240 °C; Bed 30 -35 °C; Chamber 25 - 45°C; Drying Blast Drying Oven: 70 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSRecommended printing settings
- Nozzle 230; Drying Dry before use for higher printing quality. TPU for AMS must be dried before use and kept moisture-free during the printing process to prevent stringing.Bambu Lab, TPU for AMS official maker product pagep. 1: Cautions for Use; p. 1: Drying Recommendations; p. 1: Nozzle Temperature (℃)
Price
47.5 CAD/kgthe median of its 2 regular prices in the sample
3 listings: 2 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 50 per kg, sale priceTPU for AMS - Red (53200) / Filament with spool / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- Bambu Lab Canada: 45 CAD/kgTPU for AMS - Black (53101) / Refill / 1 kgin its price; seen 10 Sep 2026
- 3D Printing Canada: 50 CAD/kgNeon Green - Bambu Lab TPU for AMS Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
Its 3 documents
What the maker says (6)
- Good for
Perfectly suited for vibrant multicolor projects, it opens up exciting possibilities in flexible material printing.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSp. 1 - Benefits
With a Shore hardness of 68D, Bambu TPU for AMS offers impressive toughness while minimizing stringing, delivering the ease of PLA printing alongside TPU's signature flexibility and durability.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSp. 1 - Pitfalls and limitations
It's not recommended to anneal prints of TPU, or prints with not very simple shape and structure can deform obviously.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSp. 3 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSp. 3 - Good for
With a Shore hardness of 68D, Bambu TPU for AMS combines exceptional toughness with the flexibility and durability of TPU. It's ideal for printing durable, impact-resistant parts like protective cases, phone covers, door stoppers, sports equipment, automotive parts, and much more!
Bambu Lab, TPU for AMS official maker product pagep. 1: exact product features/description/application tips, source text line 118 - Pitfalls and limitations
0.2 mm Nozzle NOT Compatible
Bambu Lab, TPU for AMS official maker product pagep. 1: exact product features/description/application tips, source text line 43
Chemicals and environment (6)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSFlammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - TPU for AMSResistance to Oil and Grease
eSUN TPU-64DStrength XY, MPa39Strength Z, MPa25Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–250Bed, °C0–60Chamber, °C—Drying, °C, h804–8 h
eSUN TPU-64DeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet TPU-64D7 values | |||
| Tensile strength (yield or break not stated) XY | 39 MPap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 25 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 140 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 46 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Glass transition temperature | -9 ℃p. 1: Glass Transition Temperature | no standard stated | |
| Continuous service temperature | 90 ℃p. 1: Continuous Service Temperature IEC 60216 | IEC 60216 | |
| Density | 1.21 g/cm3p. 1: Density GB/T 1033 | GB/T 1033 | |
Print settings
- Nozzle
- 210–250 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 4–8 hown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 210-250℃; Bed 0-60℃; Drying 80℃,4-8HeSUN, Technical Data Sheet TPU-64Dp. 2: Recommended printing settings: Extruder Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
- Nozzle 210-250℃/410-482℉; Bed 0-60; Drying Dry at55℃/>4heSUN, TPU-64D official maker product pagep. 1: Bed Temperature(°C); p. 1: Extruder Temperature(°C)
- Nozzle 210-250℃/410-482℉; Bed 0-60; Drying Dry at55℃/>4heSUN, TPU-64D Hard-Flexible 3D Printing Filament | eSUNp. 1: Bed Temperature(°C); p. 1: Extruder Temperature(°C)
Price
Not in the price sample.
Its 4 documents
What the maker says (17)
- Good for
Medical treatment • Industrial Applications
eSUN, Technical Data Sheet TPU-64Dp. 1 - Benefits
TPU64D adopts a special modification method that reduces the processing temperature, enhances low‐ temperature plasticization and surface smoothness, and stabilizes the production filament diameter.
eSUN, Technical Data Sheet TPU-64Dp. 1 - Benefits
Its higher hardness and lower printing temperature prevent the TPU from softening, eliminating concerns about the material becoming too soft and causing feeding issues, thereby greatly enhancing printability and making it compatible with more printers.
eSUN, Technical Data Sheet TPU-64Dp. 1 - Benefits
Good wear resistance
eSUN, Technical Data Sheet TPU-64Dp. 1 - Benefits
Oil resistance
eSUN, Technical Data Sheet TPU-64Dp. 1 - Moisture sensitivity
TPU filament is highly hygroscopic and absorbs moisture easily. If it has been left unused for an extended period, we recommend drying it at 60°C for more than 8 hours before your next print.
eSUN, TPU-64D official maker product pagep.1: Official product page, source text line158 - Benefits
TPU-64D through the use of special modification methods reduced material processing temperature and improved low-temperature plasticisation and surface smoothness.
eSUN, TPU-64D official maker product pagep. 1 - Benefits
Higher hardness and lower printing temperatures make TPU less susceptible to softening, so it is no need to worry about the material being too soft, which makes it difficult to feed, and greatly improves the printability of the material, which can be adapted to a wider range of printers and print more complex models.
eSUN, TPU-64D official maker product pagep. 1 - Benefits
The strength of the model has also been improved.
eSUN, TPU-64D official maker product pagep. 1 - Benefits
Excellent Printability
eSUN, TPU-64D official maker product pagep. 1 - Benefits
Wear & Fatigue Resistance
eSUN, TPU-64D official maker product pagep. 1 - Benefits
Compatible with AMS
eSUN, TPU-64D official maker product pagep. 1 - Benefits
High Toughness
eSUN, TPU-64D official maker product pagep. 1 - Good for
Protective Enclosures Sports Protection Shock Absorption & Sealing
eSUN, TPU-64D official maker product pagep. 1 - Printing advice
We recommend using direct-drive printers for best results when printing with flexible materials.
eSUN, TPU-64D official maker product pagep. 1 - Moisture sensitivity
TPU filament is highly hygroscopic and absorbs moisture easily.
eSUN, TPU-64D official maker product pagep. 1 - Moisture sensitivity
If it has been left unused for an extended period, we recommend drying it at 60°C for more than 8 hours before your next print.
eSUN, TPU-64D official maker product pagep. 1
Chemicals and environment (1)
- Moisture sensitivity: described in words
Resistance to less than 60℃ of water environment
eSUN, Technical Data Sheet TPU-64Dp.2: Water Repellency, source text line19
NinjaTek ArmadilloStrength XY, MPa47.6Strength Z, MPa—Modulus XY, GPa0.396Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–230Bed, °C25–50Chamber, °C—Drying, °C, h—
NinjaTek ArmadilloNinjaTek
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| NinjaTek, Technical Specifications Armadillo™ 3D Printing Filament11 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 57,500 psip. 1: Tensile Modulus ASTM D638 | ASTM D638 | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 6,900 psip. 1: Tensile Strength, Ultimate ASTM D638 | ASTM D638 | in the median |
| Tensile yield strength orientation not stated | 3,900 psip. 1: Tensile Strength, Yield ASTM D638 | ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 295 %p. 1: Elongation at Break ASTM D638 | ASTM D638 | in the median |
| Elongation at yield orientation not stated | 18 %p. 1: Elongation at Yield ASTM D638 | ASTM D638 | listed under other properties |
| Izod impact strength | 3.0 kJ/m2p. 1: Impact Strength (notched Izod, 23C) ASTM D256 1.41 ft.lbf/in2 | ASTM D256As the sheet prints it: Izod 23C 1.41 ft.lbf/in2 ASTM D256 | not in the median: to another standard |
| Hardness | 75 Shore Dp. 1: Hardness ASTM D2240 | ASTM D2240 | in the median |
| HDT at 0.45 MPa | 41° C °Cp. 1: Heat Deflection Temperature (HDT) @ 66psi/ 0.45 MPa | ASTM D648As the sheet prints it: ASTM D648; 0.45 MPa (66psi) | |
| Glass transition temperature | -10° C °Cp. 1: Glass Transition (Tg) | specimen not stated, DSC | |
| Melting temperature | 212° C °Cp. 1: Melting Point (via Differential Scanning Calorimeter) | specimen not stated, DSC | |
| Density | 1.18 g/ccp. 1: Specific Gravity ASTM D792 | specimen not stated, ASTM D792 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 25–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 210°C – 230°C; Bed Room temperature to 50°CNinjaTek, Armadillo 3D Printer Filament (75D)p. 1: Extruder Temperature; p. 1: Platform Temperature
- Nozzle 210°C – 230°C; Bed Room temperature to 50°CNinjaTek, Armadillo 3D Printer Filament (75D)p. 1: Print Guidelines
Price
Not in the price sample.
Its 4 documents
What the maker says (17)
- Warping and shrinkage
Excellent bridging capabilities and virtually no warping
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Benefits
Abrasion resistance 84% better than PLA and 60% better than ABS
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Precision and tolerance
Consistent diameter and material properties providing reliable, high-quality prints
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Printing advice
No heated bed required.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Printing advice
Build platform requires same prep as PLA.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Good for
From prototypes to end-use parts, Armadillo’s strength and durability hold up in most applications.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Good for
Designers in prosthetics know our tough TPU is strong enough for wear and tear.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Good for
3D print durable, impact-resistant shoes and tough sports equipment with Armadillo.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Good for
Save time and money using Armadillo to prove your concepts. Print your product in a fraction of the time it would take with traditional methods.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Good for
With Armadillo you can print impossible-to-find parts that hold up to the wear and tear of everyday use.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Printing advice
Glue is suggested on bed.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Printing advice
Top and bottom layers: 20-30 mm/sec (900-1800 mm/min)
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Benefits
Our toughest stuff, Armadillo ® is a high-performing rigid TPU filament that provides 90% higher abrasion resistance than nylon.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Benefits
Its toughness ratings are superior to commonly used materials, and it’s an excellent 3D printing material to use for bridging with virtually no warping issues.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Good for
Save time and money using Armadillo to prove your concepts.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Benefits
Its toughness ratings are superior to commonly used materials
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1 - Warping and shrinkage
it’s an excellent 3D printing material to use for bridging with virtually no warping issues.
NinjaTek, Armadillo 3D Printer Filament (75D)p. 1
Copper3D MD FlexStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa0.15Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C225–245Bed, °C0–60Chamber, °C—Drying, °C, h—
Copper3D MD FlexCopper3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Copper3D, MD¹ Flex Antibacterial Nanocomposite9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 150 MPap. 4: Tensile (E) modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 50 Mpap. 4: Tensile Strength at Yield | ISO 527As the sheet prints it: ISO 527 1/2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 450%p. 3: elongation at break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 450%p. 4: Elongation-Strain at Break | ISO 527As the sheet prints it: ISO 527 1/2 | not in the median: another value of this product is in it |
| Hardness | 98 Shore Ap. 4: Shore Hardness ISO 7619-1 | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Glass transition temperature | -16 °Cp. 4: Glass transition (Tg) DSC | DSCAs the sheet prints it: Tg DSC | |
| Vicat softening temperature | 138 °Cp. 4: Vicat softening temperature ASTM D 1525 | ASTM D1525 | |
| Melting temperature | 225 °Cp. 4: Melting temp. ISO 294 | ISO 294 | |
| Density | 1,16 g/ccp. 4: Specific gravity ISO 1183 | ISO 1183 | |
Print settings
- Nozzle
- 225–245 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 235±10°C; Bed 0°-60°CCopper3D, MD¹ Flex Antibacterial Nanocompositep. 4: Recommended printing settings; p. 4: BED TEMP.
Price
Not in the price sample.
Its 2 documents
What the maker says (9)
- Benefits
Antibacterial action has been scientifically validated eliminating more than 99.99% of fungi, viruses, bacteria and a wide range of microorganisms.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 3 - Benefits
Clinically tested in prosthesis for amputees with excellent results.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 3 - Good for
it's also ideal for the manufacture of other medical applications where it’s dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and orthopedic insoles.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 3 - Benefits
The Nano-Additive maintains all the mechanical properties of the TPU98A material like strong & flexibility, high heat resistance (138°C), 450% elongation at break and easy to print at vel. >75mm/s.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 3 - Moisture sensitivity
“Keep the package sealed until ready to use and reseal any unused material”
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 4 - Printing advice
MD Flex does not require a heated bed to stick well though you can set it to 0-60°C for extra reassurance.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 4 - Printing advice
MD Flex works superb with a direct drive feeder, or newer types of Bowden FDM or FFF technology 3D printers.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 4 - Printing advice
By changing the infill/amount of walls you can create the perception of a higher/lower shore than 98A.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 4 - Moisture sensitivity
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Copper3D, MD¹ Flex Antibacterial Nanocompositep. 4
Extrudr FLEX MEDIUMStrength XY, MPa34Strength Z, MPa—Modulus XY, GPa0.12Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C230–250Bed, °C50–90Chamber, °CnoneDrying, °C, h6012 h
Extrudr FLEX MEDIUMExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TPU FLEX Medium Filament – Shore Hardness A98 | Extrudr13 values | |||
| Tensile modulus orientation not stated | 120 MPap. 1: Tensile modulus (Young's modulus) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 34 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 34 MPap. 1: Tensile stress at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 425 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 110 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | -30 °Cp. 1: Glass transition temp. (Tg) | ISO 11357As the sheet prints it: ISO 11357-1 (DSC) | |
| Vicat softening temperature | ~85 °Cp. 1: Vicat softening temp. (VST/B50) | ISO 306 | |
| Melting temperature | 193–203 °Cp. 1: Melting point (Tm) | ISO 3146As the sheet prints it: ISO 3146-C | |
| Decomposition temperature | 220 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Density | 1.18 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Water absorption | 0.8 %p. 1: Water absorption (saturation, 23°C) | no standard namedAs the sheet prints it: state=saturation | |
| Melt mass-flow rate | 55–80 g/10 minp. 1: Melt flow rate (MFR) — 210°C/2.16 kg | ISO 1133As the sheet prints it: ISO 1133-1 (210°C/2.16 kg); temp/load=210°C/2.16 kg | |
| Mould shrinkage orientation not stated | 0.8–1.2 %p. 1: Mould shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM10 valuesThe same values also in Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 40 MPap. 1: Tensile modulus (E-Modulus) ISO 527-2/5A/500 MPaalso in Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM | ISO 527As the sheet prints it: ISO 527-2/5A/500 | not in the median: measured on a moulded bar |
| Elongation at break | 475 %p. 1: Ultimate elongation ISO 527-2/5A/500 %also in Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM | ISO 527As the sheet prints it: ISO 527-2/5A/500 | not in the median: measured on a moulded bar |
| Hardness | 98 Shore Ap. 1: Shore hardness ISO 868 Shorealso in Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM | ISO 868 | not in the median: the resin supplier's value, not a printed part |
| Compression strength | 40 MPap. 1: Compressive strength DIN 53452 MPaalso in Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM | DIN 53452 | |
| Poisson's ratio | 0.47p. 1: Poisson-ratio acc. to Hencky | no standard namedAs the sheet prints it: Hencky | |
| Tensile stress at 100 % elongation | 17 (100%) MPap. 1: Tensile stress at 100 % elongation | ISO 527As the sheet prints it: ISO 527-2/5A/500; strain=100% | |
| Tensile stress at 300 % elongation | 30 (300%) MPap. 1: Tensile stress at 300 % elongation | ISO 527As the sheet prints it: ISO 527-2/5A/500; strain=300% | |
| Vicat softening temperature | 110 °Cp. 1: VICAT A (VST) ISO 306 °Calso in Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM | ISO 306 | |
| Melting temperature | 190-220 °Cp. 1: Melting temperature ISO 3146-C °Calso in Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.19 g/cm³p. 1: Density ISO 2781 g/cm³ | ISO 2781 | |
| Extrudr, TECHNICAL DATA SHEET FLEX MEDIUM2 values | |||
| Tear strength orientation not stated | 170 kN/mp. 1: Tear strength ISO 34-1B kN/m | ISO 34As the sheet prints it: ISO 34-1B | |
| Abrasion loss | 25 mm³p. 1: Abrasion resistance ISO 4649-A mm³ | ISO 4649As the sheet prints it: ISO 4649-A | |
Print settings
- Nozzle
- 230–250 °Cown data sheet
- Bed
- 50–90 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 230-250°C; Bed 50-90°CExtrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Adhesive
- Nozzle 230-250°C; Bed 50-90°CExtrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Adhesive
- Nozzle 230–250 °C; Bed 50–90 °C; Drying Drying temperature 60 °C; Drying time 12 hExtrudr, TPU FLEX Medium Filament – Shore Hardness A98 | Extrudrp. 1: Print Settings, Drying (drying only; p. 1: Surface preparation; p. 1: Recommended settings for printers with a 0.4 mm nozzle
Price
Not in the price sample.
Its 4 documents
What the maker says (7)
- Good for
Due to its low evaporation rate, FLEX Medium is particularly well-suited for automotive interior applications.
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1 - Benefits
Very impact and breakage resistant
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1 - Benefits
Halogen-free
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1 - Benefits
Free of silicone, plasticisers and oils
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1 - Benefits
Based on Polycaprolactone-Polyester, it offers an extensibility of up to 470%, high material quality, high chemical resistance, and a heat distortion resistance of up to 115°C, making the material suitable for numerous industrial applications.
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1 - Adhesion between layers
Extreme layer adhesion
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
UV-resistant
UVExtrudr, TECHNICAL DATA SHEET FLEX MEDIUMp. 1
Flashforge TPU 64DStrength XY, MPa30Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²62Price, CAD/kg—Nozzle, °C220–240Bed, °C35–55Chamber, °C—Drying, °C, h90–100≥ 12 h
Flashforge TPU 64DFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Flashforge, Technical Data Sheet TPU 64D Filament8 valuesUnless a row says otherwise: printed specimenprint settingsTest Equipment Flashforge AD5X; Nozzle Diameter 0.4mm; Nozzle Temperature 230°C; Printing Speed 150mm/s; Heated bed temperature 35°C; Wall Thickness 1.8mm; Shell thickness 1.2mm; Infill 100% | |||
| Tensile strength (yield or break not stated) XY | 30-35 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527 | in the median |
| Elongation at break XY | 540-550 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527 | in the median |
| Elongation at break XZ | 490-500 %p. 1: Elongation at Break (X-Z) ISO 527 % | ISO 527 | not in the median: measured on a bar in another orientation |
| Flexural modulus XY | 100~200 Mpap. 1: Flexural modulus (X-Y) | ISO 178 | in the median |
| Charpy impact strength XY | 62~66 KJ/m²p. 1: Notch impact strength² (X-Y) | ISO 179As the sheet prints it: ISO 179; notched | not in the median: the only value of its test, shown as published |
| Charpy impact strength ZX | 20~25 KJ/m²p. 1: Impact strength (Z-X) | ISO 179 | not in the median: notch not stated |
| Density | 1.22-1.24 g/cm³p. 1: Density ISO 1183 g/cm³ | specimen not stated, ISO 1183print settings not stated | |
| Melt mass-flow rate | 40-50 g/10minp. 1: Melt Flow Rate (MFR) (210℃/2.16Kg) ISO 1133 g/10min | specimen not stated, ISO 1133As the sheet prints it: MFR 210℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 35–55 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 90–100 °C for ≥ 12 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 220~240℃ (230℃ recommended); Bed 35~55℃(40℃ recommended); Drying In case the filament has become wet, it should be dried before being used; Using a hot dry air oven at 90℃-100℃ for at least 12 hours is recommendedFlashforge, Technical Data Sheet TPU 64D Filamentp. 2: Recommended printing settings: Nozzle Temperature, Build Platform Temperature; p. 3: Drying note; p. 2: Nozzle & Gear Material; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
suitable for a wide range of applications, including footwear, bags, automotive components, electronics, and sports equipment.
Flashforge, Technical Data Sheet TPU 64D Filamentp. 1 - Benefits
The filament also provides excellent transparency, high print accuracy, and contains no harmful additives
Flashforge, Technical Data Sheet TPU 64D Filamentp. 1 - Nozzle wear
Nozzle & Gear Material Hardened steel
Flashforge, Technical Data Sheet TPU 64D Filamentp. 2 - Printing advice
After the printing process, it is recommended to dry the model in the oven at 120-130°C for 6-8 hours to increase the strength of the model.
Flashforge, Technical Data Sheet TPU 64D Filamentp. 3
Chemicals and environment (2)
- UV and outdoor: described in words
UV stabilized/Oil and grease resistance/High elasticity/High hardness.
UVFlashforge, Technical Data Sheet TPU 64D Filamentp. 1 - Post-processing: described in words
After the printing process, it is recommended to dry the model in the oven at 120-130°C for 6-8 hours to increase the strength of the model.
Flashforge, Technical Data Sheet TPU 64D Filamentp. 3: Post-processing note
Nanovia TPU 70DStrength XY, MPa28Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C230–250Bed, °C60–80Chamber, °C20Drying, °C, h806 h
Nanovia TPU 70DNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia TPU 70D : Industrial semi-rigid : Nanovia6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 28 MPap. 1: Traction resistance | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 320 %p. 1: Elong. at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 70 Shore Dp. 1: Hardness Shore | no standard stated | in the median |
| Tensile stress at 100 % elongation orientation not stated | 20 MPap. 1: Traction stress | ISO 527print settings100% élongation | |
| Tensile stress at 300 % elongation orientation not stated | 28 MPap. 1: 300% élongation | ISO 527print settings300% élongation | |
| Density | 1,12 g/cm3p. 1: Density | ISO 1183 | |
| Nanovia, TPU 70D official material safety data sheet1 value | |||
| Glass transition temperature | -16 °C:p. 2: Tg | no standard stated | |
Print settings
- Nozzle
- 230–250 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 80 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 230 – 250 °C; Bed 60 – 80 °C; Chamber 20 °C; Drying Dehydrate for 6 h at 80 °C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia TPU 70D : Industrial semi-rigid : Nanoviap. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Good for
This polyurethane FFF thermoplastic is suited for outside usage, and ideal for silent blocks, wheels, soles, piping, shock absorbers, orthopédic prothèsis, security equipment etc…
Nanovia, Nanovia TPU 70D : Industrial semi-rigid : Nanoviap. 1 - Benefits
With its shore hardness close to ABS (hard hat materiel) of 70D, Nanovia TPU 70D allows for semi-rigid functional wear resistant structures.
Nanovia, Nanovia TPU 70D : Industrial semi-rigid : Nanoviap. 1 - Surface finish
Unlike other flexible filaments Nanovia TPU 70 is rigid enough to be sanded.
Nanovia, Nanovia TPU 70D : Industrial semi-rigid : Nanoviap. 1 - Benefits
The product is approved for food contact.
Nanovia, TPU 70D official material safety data sheetp. 2: Section7.2 safe storage, English column
Chemicals and environment (3)
- UV and outdoor: described in words
UV resistant
UVNanovia, Nanovia TPU 70D : Industrial semi-rigid : Nanoviap. 1 - Acid resistance: described in words
Strong alkali or acids can degrade the material.
Effect of strong acids · strongNanovia, TPU 70D official material safety data sheetp. 2: Section10.3 possible side reactions - Alkali resistance: described in words
Strong alkali or acids can degrade the material.
Effect of strong alkalis · strongNanovia, TPU 70D official material safety data sheetp. 2: Section10.3 possible side reactions
Siraya Tech Flex TPU 64DStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa0.392Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C240–270Bed, °C45Chamber, °CnoneDrying, °C, h50–604–6 h
Siraya Tech Flex TPU 64DSiraya Tech
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Siraya Tech, Siraya Tech Flex TPU 64D Filament TDS7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 392 MPap. 1: Young’s Modulus (MPa) | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 39 MPap. 1: Tensile Stress at Break (MPa) | printed specimen (implied by the document), ASTM D638 | in the median |
| Elongation at break orientation not stated | 395 %p. 1: Elongation at Break(%) | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 64 Shore Dp. 1: Shore Hardness (D) | ISO 7619 | in the median |
| Vicat softening temperature | 133 ℃p. 1: Vicat softening temperature (℃) | ISO 306 | |
| Melting temperature | 220 ℃p. 1: Melting Point (℃) | ASTM D3418 | |
| Density | 1.23 g/cm³p. 1: Filament Density g/cm³ | ISO 1183 | |
Print settings
- Nozzle
- 240–270 °Cown data sheet
- Bed
- 45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 4–6 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 240-270°C; Bed 45°C; Drying 50-60°C for at least 4-6 hoursSiraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1: Recommended printing settings; p. 1: Nozzle size request
Price
Not in the price sample.
Its 2 documents
What the maker says (29)
- Good for
Functional gears, rollers, and mechanical components
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Good for
Jigs, fixtures, and manufacturing aids
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Good for
Protective housings and semi-flexible enclosures
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Good for
External wearables and flexible covers
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Benefits
High abrasion and wear resistance under repeated stress
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Benefits
Smooth printing with reduced clogging and stringing
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Benefits
ISO 10993-5/-10/-23 tested for biocompatibility support
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Surface finish
Briefly applying heat (e.g., heat gun on low setting, very quick pass with a torch flame) can sometimes smooth surfaces or reduce fuzziness, but exercise extreme caution to avoid melting or burning the part.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Surface finish
TPU is difficult to sand effectively.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Adhesion between layers
Excellent tensile strength and layer adhesion
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Moisture sensitivity
Wet filament leads to poor print quality (stringing, bubbling, weak parts, clogging).
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Moisture sensitivity
TPU is highly hygroscopic, meaning it readily absorbs moisture from the air.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Moisture sensitivity
Longer drying times may be needed if the filament has been exposed to humid air for extended periods.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Moisture sensitivity
Consider using a drying print box during long prints.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Moisture sensitivity
Dry the filament thoroughly before every print, even if the spool is new
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Moisture sensitivity
Stringing/Oozing Dry filament thoroughly.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Nozzle wear
Nozzle S tandard brass or higher grad e will work
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Supports and removal
Supports printed in TPU 64D can be challenging due to strong layer bonding.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Supports and removal
Optimize support settings in your slicer (e.g., increase Z distance, use support interface layers with a compatible material if doing multi-material printing, reduce support density).
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Supports and removal
The rigidity of 64D might make supports snap off more cleanly than softer TPUs in some cases.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
Extruder Direct drive provides the best results
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
Printer type Enclosure not required
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
Use a brim or raft if printing parts with small contact areas or sharp corners.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
Start in the middle (e.g., 255°C) and perform a temperature tower test for optimal layer adhesion and surface finish.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
First Layer Start slower (e.g., 15-20mm/s) and slightly hotter (e.g., +5°C on nozzle) for best adhesion.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
TPU generally requires minimal retraction to prevent clogging and stringing.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
Disable retraction during layer changes if stringing isn't an issue ("Wipe" settings can help).
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
Too much cooling can weaken layer adhesion; too little can worsen overhangs and stringing.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1 - Printing advice
TPU often requires a slightly lower flow rate (e.g., 93-96%) than rigid filaments.
Siraya Tech, Siraya Tech Flex TPU 64D Filament TDSp. 1
FormFutura Python FlexStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa0.15Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C0–60Chamber, °C—Drying, °C, h656 h
FormFutura Python FlexFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Python Flex7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 150 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 50.0 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 450 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 98 Shore Ap. 1: Hardness | ISO 7619As the sheet prints it: ISO 7619‐1 | in the median |
| Vicat softening temperature | 138° Cp. 1: Viscat softening temp. | ASTM D1525As the sheet prints it: ASTM D1525; B/2 (120° C/h, 50N) | |
| Melting temperature | 220 ± 10° Cp. 1: Melting termperature | no standard stated | |
| Density | 1.16 g/ccp. 1: Specific gravity | ISO 1183 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 65 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle ± 220 ‐ 250° CFormFutura, Technical Data Sheet Python Flexp. 1: Recommended printing settings
- Nozzle ± 220 – 250° C; Bed ± 0 – 60° C; Drying When the filament is too wet it is recommended to dry Python Flex in an oven or filament drying machine at 65C for approximately 6 hours.FormFutura, Python Flex TPU 98Ap. 1: General printing guidelines; Hygroscopy
Price
Not in the price sample.
Its 3 documents
What the maker says (27)
- Benefits
Python Flex is a high‐performance flexible thermoplastic polyurethane (TPU) filament, which is designed for high speed printing on both direct drive and Bowden style extruders.
FormFutura, Technical Data Sheet Python Flexp. 1 - Benefits
Python Flex is an extremely easy to print flexible filament which can be printed directly on a glass plate without having to use the heatbed.
FormFutura, Technical Data Sheet Python Flexp. 1 - Benefits
Python Flex is extremely transparent in its natural form and has excellent resistance to oil, greases, microorganisms and abrasion.
FormFutura, Technical Data Sheet Python Flexp. 1 - Good for
Python Flex TPU 98A is a flexible type of 3D printer filament with a shore hardness of 98A and is perfect for 3D printing strong and resilient parts that require flexibility and elasticity.
FormFutura, Python Flex TPU 98Ap. 1 - Good for
Python Flex 98A is a TPU based filament which is perfect for parts needing flexibility and elasticity.
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
It is designed for high speed printing on both direct drive and Bowden style extruders.
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
Python Flex is an extremely easy to print flexible filament: it can be printed directly on a (unheated) glass plate.
FormFutura, Python Flex TPU 98Ap. 1 - Printing advice
it can be printed directly on a (unheated) glass plate
FormFutura, Python Flex TPU 98Ap. 1 - Surface finish
Python Flex is extremely transparent in its natural form
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
Perfect combination of strength, flexibility and elasticity
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
Designed for high speed printing
FormFutura, Python Flex TPU 98Ap. 1 - Printing advice
Flexible filament that can be printed at speeds of >80mm/s
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
Heat resistant up to 138°C
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
Watertight printing possible with only single wall prints
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
Excellent resistance to oil, greases, microorganisms and abrasion
FormFutura, Python Flex TPU 98Ap. 1 - Benefits
Very easy to print on both direct drive & Bowden style extruders
FormFutura, Python Flex TPU 98Ap. 1 - Warping and shrinkage
Warp-free printing and no deformation after cooling
FormFutura, Python Flex TPU 98Ap. 1 - Adhesion between layers
Improved flowing behaviour and inter-layer adhesion
FormFutura, Python Flex TPU 98Ap. 1 - Printing advice
Good first layer adhesion to several (un)heated print surfaces
FormFutura, Python Flex TPU 98Ap. 1 - Printing advice
*) Print temperature depends on printing speed and wall thickness (e.g. ± 220 – 230° C for single wall objects with no infill at 50mm/s and ± 245 – 255° C for high infilled objects at 100mm/s)
FormFutura, Python Flex TPU 98Ap. 1 - Printing advice
* ) Flow rate depends on configuration of hotend and feeder setup, but is increases when printing speed increases (e.g ± 110% for 50mm/s till even 130% for 100mm/s
FormFutura, Python Flex TPU 98Ap. 1 - Moisture sensitivity
Python Flex is a very hygroscopic material and will attract and hold water molecules from the surrounding environment.
FormFutura, Python Flex TPU 98Ap. 1 - Moisture sensitivity
When opened and exposed to humidity too long this can have a negative effect on the printing behaviour and quality of the filament.
FormFutura, Python Flex TPU 98Ap. 1 - Moisture sensitivity
It is therefore strongly recommended to immediately remove the spool from the printer after printing and store it in a vacuum bag or airtight container without silica.
FormFutura, Python Flex TPU 98Ap. 1 - Moisture sensitivity
When the filament is too wet it is recommended to dry Python Flex in an oven or filament drying machine at 65C for approximately 6 hours.
FormFutura, Python Flex TPU 98Ap. 1 - Moisture sensitivity
Drying times can depend on how long the filament has been exposed to humidity.
FormFutura, Python Flex TPU 98Ap. 1 - Moisture sensitivity
Python Flex is packaged in a vacuum bag with a guaranteed moisture content of less than 0,2% to ensure ideal printing behaviour and results directly after opening the spool.
FormFutura, Python Flex TPU 98Ap. 1
Extrudr FLEX HARDStrength XY, MPa34Strength Z, MPa—Modulus XY, GPa0.4Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C230–260Bed, °C50–90Chamber, °CnoneDrying, °C, h6012 h
Extrudr FLEX HARDExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| a document with no title recorded12 values | |||
| Tensile modulus orientation not stated | 400 MPap. 1: Tensile modulus (Young's modulus) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 34 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 34 MPap. 1: Tensile stress at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 430 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 380 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Abrasion loss | 25 mm³p. 1: Abrasion resistance | no standard stated | |
| Vicat softening temperature | ~105 °Cp. 1: Vicat softening temp. (VST/B50) | ISO 306 | |
| Melting temperature | 202–212 °Cp. 1: Melting point (Tm) | ISO 3146As the sheet prints it: ISO 3146-C | |
| Decomposition temperature | 220 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Density | 1.19 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Water absorption | 0.8 %p. 1: Water absorption (saturation, 23°C) | no standard namedAs the sheet prints it: state=saturation | |
| Mould shrinkage orientation not stated | 0.8–1.2 %p. 1: Mould shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, TECHNICAL DATA SHEET FLEX HARD11 valuesThe same values also in Extrudr, TECHNICAL DATA SHEET FLEX HARD.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 40 MPap. 1: Tensile modulus (E-Modulus) ISO 527-2/5A/500 MPaalso in Extrudr, TECHNICAL DATA SHEET FLEX HARD | ISO 527As the sheet prints it: ISO 527-2/5A/500 | not in the median: measured on a moulded bar |
| Elongation at break | 490 %p. 1: Ultimate elongation ISO 527-2/5A/500 %also in Extrudr, TECHNICAL DATA SHEET FLEX HARD | ISO 527As the sheet prints it: ISO 527-2/5A/500 | not in the median: measured on a moulded bar |
| Hardness | 58 Shore Dp. 1: Shore hardness ISO 868 Shorealso in Extrudr, TECHNICAL DATA SHEET FLEX HARD | ISO 868 | not in the median: the resin supplier's value, not a printed part |
| Compression strength | 40 MPap. 1: Compressive strength DIN 53453 MPaalso in Extrudr, TECHNICAL DATA SHEET FLEX HARD | DIN 53453 | |
| Poisson's ratio | 0.45p. 1: Poisson-ratio acc. to Hencky | no standard namedAs the sheet prints it: Hencky | |
| Tensile stress at 100 % elongation | 16 (100%) MPap. 1: Tensile stress at 100 % elongation | ISO 527As the sheet prints it: ISO 527-2/5A/500; strain=100% | |
| Tensile stress at 300 % elongation | 29 (300%) MPap. 1: Tensile stress at 300 % elongation | ISO 527As the sheet prints it: ISO 527-2/5A/500; strain=300% | |
| Glass transition temperature | -24 °Cp. 1: Glass transition temperature °C | no standard stated | |
| Vicat softening temperature | 140 °Cp. 1: VICAT A (VST) ISO 306 °Calso in Extrudr, TECHNICAL DATA SHEET FLEX HARD | ISO 306 | |
| Melting temperature | 190-210 °Cp. 1: Melting temperature ISO 3146-C °Calso in Extrudr, TECHNICAL DATA SHEET FLEX HARD | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.2 g/cm³p. 1: Density ISO 2781 g/cm³ | ISO 2781 | |
| Extrudr, TECHNICAL DATA SHEET FLEX HARD2 values | |||
| Tear strength orientation not stated | 175 kN/mp. 1: Tear strength ISO 34-1B kN/m | ISO 34As the sheet prints it: ISO 34-1B | |
| Abrasion loss | 26 mm³p. 1: Abrasion resistance ISO 4649-A mm³ | ISO 4649As the sheet prints it: ISO 4649-A | |
Print settings
- Nozzle
- 230–260 °Cown data sheet
- Bed
- 50–90 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 230-260°C; Bed 50-90°CExtrudr, TECHNICAL DATA SHEET FLEX HARDp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Adhesive
- Nozzle 230-260°C; Bed 50-90°CExtrudr, TECHNICAL DATA SHEET FLEX HARDp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Adhesive
- Nozzle 230–260 °C; Bed 50–90 °C; Drying Drying temperature 60 °C; Drying time 12 ha document with no title recordedp. 1: Print Settings, Drying (drying only; p. 1: Surface preparation; p. 1: Recommended settings for printers with a 0.4 mm nozzle
- Nozzle 230–260 °C; Bed 50–90 °C; Drying Drying temperature 60 °C; Drying time 12 hExtrudr, FLEX HARD official maker product pagep. 1: Nozzle temperature; p. 1: Build plate temperature; p. 1: Surface preparation; p. 1: Enclosed chamber required; p. 1: Hardened nozzle required; p. 1: Recommended settings for printers with a 0.4 mm nozzle; p. 1: Drying
Price
Not in the price sample.
Its 5 documents
What the maker says (9)
- Good for
Due to its low evaporation rate, FLEX Hard is particularly suitable for automotive interior applications.
Extrudr, TECHNICAL DATA SHEET FLEX HARDp. 1 - Benefits
Very impact and breakage resistant
Extrudr, TECHNICAL DATA SHEET FLEX HARDp. 1 - Benefits
Halogen-free
Extrudr, TECHNICAL DATA SHEET FLEX HARDp. 1 - Benefits
Free of silicone, plasticisers and oils
Extrudr, TECHNICAL DATA SHEET FLEX HARDp. 1 - Benefits
Based on Polycaprolactone-Polyester, it offers an extensibility of up to 480%, high material quality, high chemical resistance, and a heat distortion resistance of up to 140°C, making the material suitable for numerous industrial applications.
Extrudr, TECHNICAL DATA SHEET FLEX HARDp. 1 - Adhesion between layers
Extreme layer adhesion
Extrudr, TECHNICAL DATA SHEET FLEX HARDp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET FLEX HARDp. 1 - Pitfalls and limitations
Independently tested for UV and weather resistance, holding its colour and integrity through extended outdoor exposure.
Extrudr, FLEX HARD official maker product pagep.1: Exact product FAQ/highlight, source text line88 - Pitfalls and limitations
No. FLEX Hard is not certified for food contact.
Extrudr, FLEX HARD official maker product pagep.1: Exact product FAQ/highlight, source text line110
Chemicals and environment (1)
- UV and outdoor: described in words
UV-resistant
UVExtrudr, TECHNICAL DATA SHEET FLEX HARDp. 1
Fillamentum Flexfill TPU 98AStrength XY, MPa53.7Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–240Bed, °C50–60Chamber, °C—Drying, °C, h100≥ 3 h
Fillamentum Flexfill TPU 98AFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, Flexfill TPU 98A9 values | |||
| Tensile break strength orientation not stated | 53,7 MPap. 1: Tensile strength | DIN 53504 | in the median |
| Elongation at break orientation not stated | 318 %p. 1: Elongation at break | DIN 53504 | in the median |
| Hardness | 98 Shore Ap. 1: Hardness | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Tear strength orientation not stated | 170 kN/mp. 1: Tear strength | ISO 34As the sheet prints it: ISO 34-1 | |
| Abrasion loss | 23 mm³p. 1: Abrasion | ISO 4649As the sheet prints it: ISO 4649; method A | |
| Tensile stress at 10 % elongation orientation not stated | 12,1 MPap. 1: Tensile stress (12,1 MPa) | DIN 53504As the sheet prints it: DIN 53504; elongation=10%; rate=200 mm/min | |
| Tensile stress at 100 % elongation orientation not stated | 28,4 MPap. 1: Tensile stress (28,4 MPa) | DIN 53504As the sheet prints it: DIN 53504; elongation=100%; rate=200 mm/min | |
| Tensile stress at 300 % elongation orientation not stated | 37,8 MPap. 1: Tensile stress (37,8 MPa) | DIN 53504As the sheet prints it: DIN 53504; elongation=300%; rate=200 mm/min | |
| Density | 1,23 g/cm3p. 1: Material density | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 100 °C for ≥ 3 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 220–240 °C; Bed 50–60 °CFillamentum, Flexfill TPU 98Ap. 1: Recommended printing settings
- Drying 100 °C; minimum drying time 3 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row FLEXFILL TPU 98A; own minimum-time/temperature/need columns, with p1 restrictions
Price
Not in the price sample.
Its 4 documents
What the maker says (12)
- Good for
This material is ideal for dynamically stressed parts, for example belts, shoe outsoles, wheels, grippers, flexible covers.
Fillamentum, Flexfill TPU 98Ap. 1 - Benefits
The material is based on polyurethane, which offers highly reversible deformation, resistance to ozone, oils and greases and good transparency.
Fillamentum, Flexfill TPU 98Ap. 1 - Benefits
Properties are stable also thanks to improved UV stability.
Fillamentum, Flexfill TPU 98Ap. 1 - Benefits
It has high abrasion resistance and rebound resilience.
Fillamentum, Flexfill TPU 98Ap. 1 - Benefits
Material has resistance to wide range of temperatures.
Fillamentum, Flexfill TPU 98Ap. 1 - Pitfalls and limitations
WATER BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: WATER exact product column - Pitfalls and limitations
CAR FLUIDS BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: CAR FLUIDS exact product column - Moisture sensitivity
Note: For Flexfill TPU material, we recommend a maximum of 3 drying cycles of 3 hours, after which thermal degradation manifested by yellowing may occur.
Fillamentum, Drying of filaments before processing on 3D printerp. 1 - Moisture sensitivity
FLEXFILL TPU 98A 3 h 100 °C 5 stringing, under-extrusion, clogged nozzle
Fillamentum, Drying of filaments before processing on 3D printerp. 2 - Printing advice
For better chemical resistance, it is recommended to use more perimeters,
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 2 - Printing advice
bottom/top layers, higher temperature of printing to achieve good tightness.
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 2 - Printing advice
Always try a little printed object first!
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 2
Chemicals and environment (7)
- Organic solvent resistance: described in words
BAD
Acetone · Acetone · specificFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ACETONE row, exact TPU98A column; own legend and full conditions - Organic solvent resistance: resistant
GOOD
Ethanol · Ethanol · specificFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ETHANOL row, exact TPU98A column; own legend and full conditions - Organic solvent resistance: described in words
BAD
Effect of organic solventFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ALCOHOLS row, exact TPU98A column; own legend and full conditions - Oil and grease resistance: resistant
GOOD
Effect of oils and greaseFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: OILS row, exact TPU98A column; own legend and full conditions - Oil and grease resistance: resistant
GOOD
Effect of oils and greaseFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: GREASES row, exact TPU98A column; own legend and full conditions - Acid resistance: described in words
BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ACIDS row, exact TPU98A column; own legend and full conditions - Alkali resistance: described in words
BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ALKALIS row, exact TPU98A column; own legend and full conditions
Fabru Thermoplastic polyurethane (TPU)Strength XY, MPa38Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C195–235Bed, °C60Chamber, °C—Drying, °C, h802–3 h
Fabru Thermoplastic polyurethane (TPU)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Thermoplastic polyurethane (TPU)5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | held back: the sheet's unit or table layout is unclearheld backp. 1: Tensile modulus (ASTM D412) | ASTM D412 | not in the median: held back |
| Tensile yield strength orientation not stated | 38 MPap. 1: Yield stress (ASTM D638) | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 470 %p. 1: Elongation at break (ASTM D638) | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 470 %physically implausiblep. 1: Elongation at yield (ASTM D638) | ASTM D638 | listed under other properties |
| Density | 1.17 g/cm3p. 1: Density (ISO 1183) | ISO 1183 | |
| Fabru, purefil TPU filament1 value | |||
| Hardness | 53D Shore Dp. 1: Shore hardness | no standard stated | in the median |
Print settings
- Nozzle
- 195–235 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 2–3 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Fabru, purefil TPU filament; bed in Fabru, purefil TPU filament.
Its 2 print profiles, in the documents' words
- Nozzle 195-225 ° C; Bed 60-80 ° CFabru, purefil TPU filamentp. 1: Nozzle temperature; p. 1: Printing table temperature
- Nozzle 195-235 °C; Bed not necessary, recommended 60°C; Drying 80°C, 2-3hFabru, Thermoplastic polyurethane (TPU)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
Not in the price sample.
Its 3 documents
What the maker says (27)
- Good for
TPU is very abrasion-resistant and has good resistance to oils and greases and is therefore often used in the field of hydraulics and pneumatics.
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Benefits
TPU is an elastic material with very good wear resistance, coupled with high resilience.
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Benefits
The material also adheres very well to other plastics, which is why it can be easily processed in dual 3D printing.
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Benefits
No heating plate necessary - high resilience - well suited for dual extrusion - low shrinkage/warping - good resistance to oils and fats
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Benefits
Can also be used at temperatures down to - 40°C
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Pitfalls and limitations
Only printable with Direct Drive Extruder - low printing speed
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Warping and shrinkage
TPU is perfect for FDM 3D printing due to its relatively low shrinkage and excellent adhesion properties.
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Warping and shrinkage
TPU can even be printed on a cold printing plate without significant distortion.
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Printing advice
With this thermoplastic elastomer, too, the smaller the filling, the more elastic the printed component remains.
Fabru, Thermoplastic polyurethane (TPU)p. 1 - Benefits
The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process.
Fabru, purefil TPU filamentp. 1 - Precision and tolerance
Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers.
Fabru, purefil TPU filamentp. 1 - Precision and tolerance
small diameter and roundness tolerances
Fabru, purefil TPU filamentp. 1 - Benefits
easy to print
Fabru, purefil TPU filamentp. 1 - Benefits
TPU is an elastic material with very good wear resistance coupled with high resilience.
Fabru, purefil TPU filamentp. 1 - Benefits
TPU is very abrasion-resistant and has good resistance to oils and greases and is therefore often used in hydraulics and pneumatics.
Fabru, purefil TPU filamentp. 1 - Benefits
TPU has very good tensile properties.
Fabru, purefil TPU filamentp. 1 - Warping and shrinkage
TPU is perfect for FDM 3D printing due to its rather small shrinkage and excellent adhesion properties.
Fabru, purefil TPU filamentp. 1 - Warping and shrinkage
TPU can even be printed on a cold printing plate without significant warping.
Fabru, purefil TPU filamentp. 1 - Benefits
The material also adheres very well to other plastics, which is why it can be processed well in dual 3D printing.
Fabru, purefil TPU filamentp. 1 - Printing advice
With this thermoplastic elastomer too, the lower the filling, the more elastic the printed component remains.
Fabru, purefil TPU filamentp. 1 - Printing advice
The same applies to the wall thickness. The thinner the more elastic.
Fabru, purefil TPU filamentp. 1 - Benefits
- Excellent abrasion resistance
Fabru, purefil TPU filamentp. 1 - Benefits
- High elasticity
Fabru, purefil TPU filamentp. 1 - Benefits
- High tensile and tear strength
Fabru, purefil TPU filamentp. 1 - Benefits
- Oil resistance
Fabru, purefil TPU filamentp. 1 - Benefits
- Outstanding low-temperature properties
Fabru, purefil TPU filamentp. 1 - Benefits
- TPU can be used in a wide temperature range from -40°C to +80°C
Fabru, purefil TPU filamentp. 1
Spectrum S-Flex 98AStrength XY, MPa55Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–70Chamber, °CnoneDrying, °C, h904 h
Spectrum S-Flex 98ASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET S-Flex 98A9 valuesThe same values also in Spectrum, TECHNICAL DATA SHEET S-Flex 98A.Unless a row says otherwise: specimen not stated | |||
| Elongation at break orientation not stated | 510,00 %p. 1: Ultimate elongation | DIN 53504 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 98 Shore Ap. 1: Shore hardness A | ISO 7619 | in the median |
| Abrasion loss orientation not stated | 30 mm3p. 1: Abrasion Resistance | ISO 4649 | |
| Compression set orientation not stated | 32,00 %p. 1: Compression set / 70 h @ 23°C | ISO 815As the sheet prints it: 70 h 23°C ISO 815 | |
| Compression set orientation not stated | 50,00 %p. 1: Compression set / 24 h @ 70°C | ISO 815As the sheet prints it: 24 h 70°C ISO 815 | |
| Tensile stress at 100 % elongation orientation not stated | 15,4 MPap. 1: 100% Tensile Modulus | DIN 53504 | |
| Tensile stress at 300 % elongation orientation not stated | 25 MPap. 1: 300% Tensile Modulus | DIN 53504 | |
| Density | 1,09 g/cm3p. 1: Densityalso in Spectrum, TECHNICAL DATA SHEET S-Flex 98A | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Mould shrinkage orientation not stated | 0,80 %p. 1: Shrinkage | ASTM D955As the sheet prints it: D 955 | |
| Spectrum, TECHNICAL DATA SHEET S-Flex 98A4 valuesThe same values also in Spectrum, TECHNICAL DATA SHEET S-Flex 98A.Unless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 55 MPap. 1: Tensile strengthalso in Spectrum, TECHNICAL DATA SHEET S-Flex 98A | DIN 53504 | not in the median: set apart (never used to pass), test bar not described as printed |
| Abrasion loss | 30 mm³p. 1: Abrasion Resistance | ISO 4649 | |
| Compression set | 32,00%p. 1: Compression set / 70 h @ 23°C | ISO 815As the sheet prints it: ISO 815; time=70 h | |
| Compression set | 50,00%p. 1: Compression set / 24 h @ 70°C | ISO 815As the sheet prints it: ISO 815; time=24 h | |
| Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–291 value | |||
| HDT at 0.45 MPa | 75°Cphysically implausible75°C) | no standard namedAs the sheet prints it: method=B | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 90 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 5 print profiles, in the documents' words
- Nozzle 200-230°C; Bed 50-70°CSpectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Footnote *; p. 1: Dry box
- Nozzle 200-230°C; Bed 50-70°CSpectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Footnote *; p. 1: Dry box
- No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Drying 90°C, 4h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
Not in the price sample.
Its 6 documents
- Spectrum, TECHNICAL DATA SHEET S-Flex 98A
- Spectrum, TECHNICAL DATA SHEET S-Flex 98A
- Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO
- Spectrum, Filament drying - Spectrum Filaments
What the maker says (6)
- Benefits
reduced stringing while the printer is running idle
Spectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1 - Benefits
An additional advantage that allows obtaining a perfect printout is very good adhesion of the first layer of the printed part to the working space, regardless of whether it is made of glass, steel, plastic or other material.
Spectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1 - Warping and shrinkage
low shrinkage
Spectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1 - Moisture sensitivity
Dry box recommended
Spectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1 - Benefits
Up to 510% elongation at break, Shore 98A, high tensile & tear resistance
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Chemicals and environment (1)
- Hydrolytic stability: described in words
high resistance to hydrolysis
Hydrolysis / dimensional stabilitySpectrum, TECHNICAL DATA SHEET S-Flex 98Ap. 1
BigRep TPU 98AStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C50–60Chamber, °C—Drying, °C, h804–6 h
BigRep TPU 98ABigRep
Only 2.85 mm filament was found; the H2C takes 1.75 mm.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BigRep, FILAMENT TPU 98A2 valuesUnless a row says otherwise: specimen not stated | |||
| Hardness | 98 Shore Ap. 1: Shore Hardness, 3s (ISO 7619-1) | ISO 7619As the sheet prints it: 3s ISO 7619-1 | in the median |
| Density | 1.18 g/cm³p. 1: Density (ISO 1183) | ISO 1183 | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 4–6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- No temperature statedBigRep, FILAMENT TPU 98Ap. 1: Recommended printing settings
- Nozzle 210 - 240 °C; Bed 50 - 60 °C; Drying 80 °C for 4 - 6 hoursBigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1: Recommended Printing Conditions; Other Information
Price
Not in the price sample.
Its 3 documents
What the maker says (17)
- Benefits
With high impact strength, tear strength, durability, and chemical resistance, parts printed with BigRep TPU 98A can withstand heavy wear and tear.
BigRep, FILAMENT TPU 98Ap. 1 - Good for
It offers temperature resistance up to 100 °C and a high level of chemical resistance making TPU 98A suitable for rugged industrial applications.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Benefits
TPU 98A has exceptional impact strength, registering no break on the Charpy notched impact test.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Benefits
BigRep's TPU 98A is temperature resistant up to 100°C with a Vicat softening temperature of 105°C and continuous use temperature of 50°C.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Benefits
Excellent chemical resistance is one of the key advantages of BigRep TPU 98A.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Good for
It performs well against grease and oil making it great for use in factory environments.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Good for
The geometry was realized using BigRep TPU filament, which is firm and strong enough to maintain its shape during use but offers just enough flexibility to mimic the softness function of a traditional inflated tire.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Moisture sensitivity
Drying recommendations 80 °C for 4 - 6 hours
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Printing advice
Yes, the BigRep TPU 98A is compatible with all open material system 3D printers with a heated print bed and adequate temperature extrusion capabilities (210-240°C).
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Odour and emissions
Yes, it is, as long as the room has good ventilation or an air filtration system for the safety and comfort of the people using the 3D printer.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Moisture sensitivity
TPU 98A is a highly hygroscopic material which means it absorbs moisture from the air which affects the print quality.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Moisture sensitivity
We recommend filament storage with a dryer such as the DRYCON which keeps the filament in perfect condition.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Moisture sensitivity
Yes, drying TPU 98A filament is important if it has been exposed to moisture.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Moisture sensitivity
TPU 98A can absorb water from the air resulting in bubbling or stringing while printing with it.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Moisture sensitivity
We recommend using the BigRep DRYCON for 4-6 hours at 80°C, or use any industrial filament dryer or store it in a dry, airtight container with desiccants.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Moisture sensitivity
TPU 98A filament has a long shelf life if stored properly in a cool, dry place with minimal exposure to moisture or UV light.
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1 - Printing advice
Fan Speed 50 - 75 %
BigRep, TPU Filament - Flexible 3D Printer Material | Bigrepp. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.