TPU 90A class
12 products from 10 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
12 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- added filler or additive
- shared data sheet
- not published
How the numbers are worked out
colorFabb varioShore Prosthetic TPUStrength XY, MPa24Strength Z, MPa—Modulus XY, GPa0.05Charpy notched, kJ/m²40Price, CAD/kg—Nozzle, °C195–260Bed, °C50–60Chamber, °C—Drying, °C, h606 h
colorFabb varioShore Prosthetic TPUcolorFabb
Data sheet shared with colorFabb varioShore TPU: their values are one table, recorded once.
Modified: lightweight additive. Its values are kept out of the material's medians.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 195–260 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 6 hcolorFabb varioShore TPU's data sheet, shared
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 195-260; Bed 50-60colorFabb, Technical datasheet varioShore Prosthetic TPUp. 2: Nozzle Temp. ˚C, Bed Temp. ˚C
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
The added silver particles in this formulation, is known to have beneficial ani-bacterial properties, which makes this material well suited for prosthetic and orthopedic applications.
colorFabb, Technical datasheet varioShore Prosthetic TPUp. 1 - Benefits
This special formulation has an active foaming technology to achieve light weight parts, soft touch surface, and a variable Shore Hardness depending on the foaming.
colorFabb, Technical datasheet varioShore Prosthetic TPUp. 1 - Printing advice
At roughly 230°C, the foaming technology is activated, expanding the material up to 1,6x its volume.
colorFabb, Technical datasheet varioShore Prosthetic TPUp. 1
colorFabb varioShore TPUStrength XY, MPa24Strength Z, MPa—Modulus XY, GPa0.05Charpy notched, kJ/m²40Price, CAD/kg—Nozzle, °C195–260Bed, °C50–60Chamber, °C—Drying, °C, h606 h
colorFabb varioShore TPUcolorFabb
Data sheet shared with colorFabb varioShore Prosthetic TPU: their values are one table, recorded once.
Modified: lightweight additive. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet varioShore Prosthetic TPU13 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 50 MPap. 1: Youngs Modulus (50 MPa) | ISO 527As the sheet prints it: ISO 527-1A; column=@ foaming 210˚C; 100% | not in the median: added filler or additive |
| Tensile modulus XY | 40 MPap. 1: Youngs Modulus (40 MPa) | ISO 527As the sheet prints it: ISO 527-1A; column=@ foaming 230°C; 70% | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 24 MPap. 1: Tensile Strength (XY; Mechanical Properties – 3D Printed; 24 MPa) | ISO 527As the sheet prints it: ISO 527-1A; column=@ foaming 210˚C; 100% | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) XY | 12 MPap. 1: Tensile Strength (XY; Mechanical Properties – 3D Printed; 12 MPa) | ISO 527As the sheet prints it: ISO 527-1A; column=@ foaming 230°C; 70% | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) | 59 MPap. 1: Tensile Strength (Mechanical Properties – Injection Molded*; 59 MPa) | moulded bar (resin supplier's value), ISO 527As the sheet prints it: ISO 527-1A | not in the median: measured on a moulded bar |
| Elongation at break XY | 465 %p. 1: Elongation at break (XY; Mechanical Properties – 3D Printed; 465 %) | ISO 527As the sheet prints it: ISO 527-1A; column=@ foaming 210˚C; 100% | not in the median: added filler or additive |
| Elongation at break XY | 450 %p. 1: Elongation at break (XY; Mechanical Properties – 3D Printed; 450 %) | ISO 527As the sheet prints it: ISO 527-1A; column=@ foaming 230°C; 70% | not in the median: another value of this product is in it |
| Elongation at break | 490 %p. 1: Elongation at break (Mechanical Properties – Injection Molded*; 490 %) | moulded bar (resin supplier's value), ISO 527As the sheet prints it: ISO 527-1A | not in the median: measured on a moulded bar |
| Flexural modulus XY | 50 MPap. 1: Flexural Modulus (50 MPa) | ISO 178As the sheet prints it: ISO 178; column=@ foaming 210˚C; 100% | not in the median: added filler or additive |
| Flexural modulus XY | 40 MPap. 1: Flexural Modulus (40 MPa) | ISO 178As the sheet prints it: ISO 178; column=@ foaming 230°C; 70% | not in the median: another value of this product is in it |
| Flexural strength XY | 3 MPap. 1: Flexural Strength (3 MPa) | ISO 178As the sheet prints it: ISO 178; column=@ foaming 210˚C; 100% | not in the median: added filler or additive |
| Flexural strength XY | 2 MPap. 1: Flexural Strength (2 MPa) | ISO 178As the sheet prints it: ISO 178; column=@ foaming 230°C; 70% | not in the median: another value of this product is in it |
| Charpy impact strength XY | 20 kJ/m²p. 1: Impact Strength (20 kJ/m²) | ISO 179As the sheet prints it: ISO 179; column=@ foaming 230°C; 70% | not in the median: another value of this product is in it |
| colorFabb, Technical datasheet varioShore TPU6 valuesThe same values also in colorFabb, Technical datasheet colorFabb varioShore TPU, colorFabb, Technical datasheet colorFabb varioShore TPU and colorFabb, Technical datasheet varioShore Prosthetic TPU.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 59 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 490 %p. 1: Elongation at break Tensile, ISO 527-1Aalso in colorFabb, Technical datasheet colorFabb varioShore TPUalso in colorFabb, Technical datasheet colorFabb varioShore TPU | ISO 527As the sheet prints it: ISO 527-1A | not in the median: measured on a moulded bar |
| Charpy impact strength XY | 40 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179also in colorFabb, Technical datasheet varioShore Prosthetic TPU | printed specimen, ISO 179notched | not in the median: added filler or additive |
| Glass transition temperature | -20 °Cp. 1: Glass Transition Temp. DSC, ISO 11357 | ISO 11357 | |
| Melting temperature | 130 °Cp. 1: Melting Temp. DSC, ISO 11357 | ISO 11357 | |
| Density | 1,2 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
| colorFabb, Technical datasheet colorFabb varioShore TPU3 valuesThe same values also in colorFabb, Technical datasheet colorFabb varioShore TPU.Unless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 58,6 MPap. 1: Tensile Strength MPaalso in colorFabb, Technical datasheet colorFabb varioShore TPU | ASTM D412 | not in the median: another value of this product is in it |
| Glass transition temperature | 55-60 °Cp. 1: Glass transition temperature °C | no standard stated | |
| Density | 1,22 g/cm3p. 1: Density g/cm3also in colorFabb, Technical datasheet colorFabb varioShore TPU | ASTM D792 | |
| colorFabb, Technical datasheet colorFabb varioShore TPU2 valuesThe same values also in colorFabb, Technical datasheet varioShore TPU and colorFabb, Technical datasheet colorFabb varioShore TPU.Unless a row says otherwise: specimen not stated | |||
| Hardness | 92 Shore Ap. 1: Shore hardness ofalso in colorFabb, Technical datasheet varioShore TPUalso in colorFabb, Technical datasheet colorFabb varioShore TPUalso in colorFabb, Technical datasheet colorFabb varioShore TPU | no standard stated | not in the median: added filler or additive |
| Hardness | 92 Shore Ap. 1: Hardness Shore A | ASTM D2240 | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 195–260 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in colorFabb, Technical datasheet colorFabb varioShore TPU, colorFabb, Technical datasheet colorFabb varioShore TPU; bed in colorFabb, Technical datasheet colorFabb varioShore TPU, colorFabb, Technical datasheet colorFabb varioShore TPU.
Its 4 print profiles, in the documents' words
- Nozzle 195-260 °C; Bed 50-60 °CcolorFabb, Technical datasheet varioShore TPUp. 2: Recommended printing settings
- Nozzle 190 - 250°C; Bed 20 - 40°CcolorFabb, Technical datasheet colorFabb varioShore TPUp. 1: Recommended printing settings; p. 1: Bed surface / modification
- Nozzle 190 - 250°C; Bed 20 - 40°CcolorFabb, Technical datasheet colorFabb varioShore TPUp. 1: Recommended printing settings; p. 1: Bed surface / modification
- Drying 60 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)
Price
Not in the price sample.
Its 6 documents
- colorFabb, Technical datasheet varioShore TPU
- colorFabb, Technical datasheet colorFabb varioShore TPU
- colorFabb, Technical datasheet colorFabb varioShore TPU
- colorFabb, Technical datasheet varioShore Prosthetic TPU
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- colorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Support
What the maker says (5)
- Benefits
The active foaming technology can be used to achieve light weight parts, soft touch surfaces and lower Shore hardness’s.
colorFabb, Technical datasheet colorFabb varioShore TPUp. 1 - Printing advice
At around 230C this material will start foaming, increasing its volume 1.4 - 1.6 times.
colorFabb, Technical datasheet colorFabb varioShore TPUp. 1 - Printing advice
Active cooling fan Least amound of cooling as possible. For better overhangs use 50 - 100%
colorFabb, Technical datasheet colorFabb varioShore TPUp. 1 - Benefits
This special formulation has an active foaming technology to achieve light weight parts, soft touch surface, and a variable Shore Hardness depending on the foaming.
colorFabb, Technical datasheet varioShore TPUp. 1 - Printing advice
At roughly 230°C, the foaming technology is activated, expanding the material up to 1,6x its volume.
colorFabb, Technical datasheet varioShore TPUp. 1
Bambu Lab TPU 90AStrength XY, MPa12.5Strength Z, MPa10.1Modulus XY, GPa0.0053Charpy notched, kJ/m²—Price, CAD/kg54Nozzle, °C200–250Bed, °C30–35Chamber, °C25–45Drying, °C, h708 h
Bambu Lab TPU 90ABambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90A13 valuesUnless a row says otherwise: printed specimendryAll the specimens were dried at 70 °C for 12 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 225 °C Bed Temperature 35 °C Printing Speed 34 mm/s InfillDensity 100% * All the specimens were printed at the following settings: Nozzle Temperature = 225 °C, Printing Speed = 34 mm/s, Bed Temperature = 35 °C, InfillDensity= 100%. All the specimens were dried at 70 °C for 12 h before testing. It'snot recommended t | |||
| Tensile modulus XY | 5.3 ± 0.7 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 4.4 ± 0.6 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 12.5 ± 0.8 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 10.1 ± 0.6 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | > 650 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | > 350 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Charpy impact strength XY | 124.2 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 87.3 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Hardness | 90A Shore AProduct name: TPU 90A | specimen not stated, no standard statedmoisture state not statedprint settings not stated | not in the median: rated by the product's name, not a test |
| Melting temperature | 180 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.24 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.61 %p. 2: Saturated Water | no standard namedAs the sheet prints it: 25 °C, 55% RH | |
| Melt mass-flow rate | 9.36 ± 2.6 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: flexural modulus, hdt, glass transition temperature, vicat softening temperature, crystallization temperature. | |||
Print settings
- Nozzle
- 200–250 °Cown data sheet
- Bed
- 30–35 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 -250 °C; Bed 30 -35 °C; Chamber 25 -45 °C; Drying Blast Drying Oven: 70 °C,8 hBambu Lab, Bambu Filament Technical Data Sheet - TPU 90ARecommended printing settings
Price
54 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 77 per kg, sale priceTPU 85A / TPU 90A - TPU 90A / Frozen (51900) / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- Bambu Lab Canada: 54 CAD/kgTPU 85A / TPU 90A - TPU 90A / Black (51103) / 1 kgin its price; seen 10 Sep 2026
Its 2 documents
What the maker says (4)
- Good for
With a higher hardness, it provides greater structural integrity, making it ideal for shoe soles, RC tires, and functional components that require both flexibility and strength.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90Ap. 1 - Benefits
Bambu TPU 90A deliver outstanding wear resistance, ensuring long-lasting performance even after repeated bending—making them the go-to choice for high-demand applications.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90Ap. 1 - Pitfalls and limitations
It's not recommended to anneal prints of TPU, or prints with not very simple shape and structure can deform obviously.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90Ap. 3 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90Ap. 3
Chemicals and environment (6)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90AFlammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90ASolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90AResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90AResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90AResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 90AResistance to Oil and Grease
Kingroon TPU 90AStrength XY, MPa12.5Strength Z, MPa10.1Modulus XY, GPa0.0053Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–250Bed, °C30–35Chamber, °C25–45Drying, °C, h708 h
Kingroon TPU 90AKingroon
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Kingroon, KINGROON Filament Technical Data Sheet V1.0 TPU 90A11 valuesUnless a row says otherwise: printed specimendrydried 70 °C 12 hprint settingsnozzle temperature 225 °C; printing speed 34 mm/s; bed temperature 35 °C; 100% infill density | |||
| Tensile modulus XY | 5.3±0.7MPap. 2: Young's Modulus(X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 4.4±0.6MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 12.5±0.8MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 10.1±0.6MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | >650%p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | >350%p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Charpy impact strength XY | 124.2kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 87.3kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Melting temperature | 180°Cp. 2: Melting Temperature | specimen not stated, DSCAs the sheet prints it: DSC; rate=10 °C/min | |
| Density | 1.24g/cm³p. 2: Density | specimen not stated, ISO 1183moisture state not statedprint settings not stated | |
| Melt mass-flow rate | 9.36±2.6g/10minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 2.16kg | |
Print settings
- Nozzle
- 200–250 °Cown data sheet
- Bed
- 30–35 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200- 250 °C; Bed 30- 35°C; Chamber 25- 45°C; Drying Blast Drying Oven: 70 °C, 8 hKingroon, KINGROON Filament Technical Data Sheet V1.0 TPU 90Ap. 1: Nozzle Temperature, Bed Temperature, Chamber Temperature; p. 1: Drying Settings before Printing; p. 1: Nozzle Size; p. 1: Bed Type
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
KINGROON TPU 90A features higher hardness that provides enhanced structural integrity, making it ideal for applications requiring both flexibility and strength, such as shoe soles, RC tires, protective parts, and functional mechanical components.
Kingroon, KINGROON Filament Technical Data Sheet V1.0 TPU 90Ap. 1 - Pitfalls and limitations
Annealing is not recommended for TPU prints, as models with anything other than very simple shapes or structures may deform significantly during the process.
Kingroon, KINGROON Filament Technical Data Sheet V1.0 TPU 90Ap. 3
Nanovia FlexStrength XY, MPa27Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C235–245Bed, °C20–40Chamber, °C20Drying, °C, h1006 h
Nanovia FlexNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanovia8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 27 MPap. 1: Tensile resistance | no standard namedAs the sheet prints it: VDE282 part 10 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 524 %p. 1: Ultimate elongation | no standard namedAs the sheet prints it: VDE282 part 10 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 90 Shore Ap. 1: Hardness | no standard stated | in the median |
| Hardness | 40 Shore Dp. 1: Hardness (Shore D) | no standard stated | in the median |
| Tensile stress at 100 % elongation orientation not stated | 7 MPap. 1: Resistance at 100% elongation | no standard namedAs the sheet prints it: VDE282 part 10 | |
| Tensile stress at 300 % elongation orientation not stated | 10 MPap. 1: Resistance at 300% elongation | no standard namedAs the sheet prints it: VDE282 part 10 | |
| Density | 1.21 g/cm3p. 1: Density | ISO 1183 | |
| Oxygen index | 25 %p. 1: LOI | ASTM D2863 | |
| Nanovia, MSDS / FDS Flex V0 : Résistant au feu Shore 90A/40D1 value | |||
| Glass transition temperature | 50 °Cp. 2: Tg | no standard stated | |
Print settings
- Nozzle
- 235–245 °Cown data sheet
- Bed
- 20–40 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 100 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 235 – 245 °C; Bed 20 – 40 °C; Chamber 20 °C; Drying Dehydrate for 6 h at 100 °C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1: Recommended printing settings; p. 1: Application recommendations (drying)
Price
Not in the price sample.
Its 3 documents
What the maker says (15)
- Benefits
It’s fire resistant V0, according to the UL-94 norm, at a low thickness of 0.8mm.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Printing advice
it’s easily printable on most 3D printers equipped with a direct drive
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Adhesion between layers
offers an excellent inter layer as well as bed adhesion
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Good for
Nanovia Flex V0 allows for the 3D printing of flexible parts suitable for high-risk environments thanks to its V0 UL94 non-flammability properties at 0.8mm.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Printing advice
This flexible 3D printing filament prints on the majority of 3D printers equipped with “direct drive” extruders, and does not require a closed enclosure or additional adhesive.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Good for
With its good resistance to wear and repeated bending, Nanovia Flex V0 is ideal for any flexible part in an industrial setting.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Benefits
Non-flammable V0 at 0.8mm
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Benefits
Easy to print
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Moisture sensitivity
Store in airtight container with desiccant, out of direct sunlight.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Moisture sensitivity
Dehydrate for 6 h at 100 °C prior to printing after prolonged exposure to humidity.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Printing advice
When under extrusion occures, reduce the printspeed.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Printing advice
Under extrusion might be due to the drive mecanism slipping on the filament.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Printing advice
Limiting the max volumetric speed can also help with loading and retraction slipping.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Printing advice
Nanovia Flex V0 is relativly fluid and might require a high retraction setting in the case of stringing.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1 - Odour and emissions
Print in a ventilated area.
Nanovia, Nanovia Flex V0 : Fire resistant Shore 90A/40D : Nanoviap. 1
SUNLU TPU 90AStrength XY, MPa30Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5IzodPrice, CAD/kg—Nozzle, °C220–240Bed, °C30–60Chamber, °CnoneDrying, °C, h60–70
SUNLU TPU 90ASUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, SUNLU TPU 90A official product page (Japanese)9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 40±6 MPap. 1: Tensile Strength(MPa) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 10±5 %physically implausiblep. 1: Elongation at Break(%) | no standard stated | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 65±6 MPaphysically implausiblep. 1: Flexural Strength(MPa) | no standard stated | not in the median: physically implausible as published |
| Izod impact strength orientation not stated | 5±3 kJ/m²p. 1: Notched Izod Impact Strength(kJ/m²) | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 55±5 ℃physically implausiblep. 1: Heat Deflection Temperature(℃) | no standard stated | |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(℃) | no standard stated | |
| Density | 1.23 g/cm³p. 1: Density(g/cm³) | no standard stated | |
| Melt mass-flow rate | 6.9±3 g/10 minp. 1: Melt Flow Index(g/10 min) | no standard stated | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Shrinkage(%) | no standard stated | |
| SUNLU, TECHNICAL DATA SHEET ISO TPU 90A6 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 30 ± 3 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 1=40 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 1000 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 1=40 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Hardness | 90 Shore Ap. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | in the median |
| HDT XY, at 0.45 MPa | 36 ± 2 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | |
| Density | 1.17 ± 0.02 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 32 ± 5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 210℃/2.16kg g/10 min | ISO 1133As the sheet prints it: 210℃/2.16kg ISO 1133 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60–70 °Cown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 220-240; Bed 30-60℃; Chamber Room Temperature; Drying 60-70℃SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 220-240℃; Bed 30-60℃SUNLU, SUNLU TPU 90A official product page (Japanese)p. 1: Nozzle Temperature & Print Speed; p. 1: Bed Temperature
Price
Not in the price sample.
Its 4 documents
What the maker says (3)
- Good for
Footwear materials, sports protective gear, automotive parts, and daily necessities.
SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 1 - Benefits
99.9% antibacterial effectiveness
SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 1 - Printing advice
Avoid high-infill printing
SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 1
Chemicals and environment (12)
- UV and outdoor: described in words
UV-resistant
UVSUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 1 - Stated limitations: described in words
The sample is submitted by the applicant for testing, sample source information is provided by the applicant and the laboratory is not responsible for its authenticity, the results shown in this report refer only to the sample(s).
Grade distinctionWaltek Testing Group (Foshan) Co., Ltd., Waltek inspection report WTF25F05115022R1F — TPU90Ap. 1: Cover Notice③, sample-only scope; p2 identity/language note; p4 sample and untested customer photograph - Stated limitations: described in words
80
Grade distinctionSUNLU, SUNLU TPU 90A official product page (Japanese)p. 1: Own TPU90A parameter table, Shore Hardness - Stated limitations: described in words
10±5
Grade distinctionSUNLU, SUNLU TPU 90A official product page (Japanese)p. 1: Own TPU90A parameter table, Elongation at Break - Acid resistance: described in words
Weak Acid (pH 3-6) | Good
Effect of weak acids · weakSUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 1: Chemical Item/Class, Weak Acid (pH 3-6) agent/result cells - Acid resistance: described in words
Strong Acid (pH<3) | Normal
Effect of strong acids · strongSUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Chemical Item/Class, Strong Acid (pH<3) agent/result cells - Alkali resistance: described in words
Weak Bases (pH 8-10) | Normal
Effect of weak alkalis · weakSUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Chemical Item/Class, Weak Bases (pH 8-10) agent/result cells - Alkali resistance: described in words
Strong Bases (pH >10) | Bad
Effect of strong alkalis · strongSUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Chemical Item/Class, Strong Bases (pH >10) agent/result cells - Moisture sensitivity: described in words
Deionized Water | Good
SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Chemical Item/Class, Deionized Water agent/result cells - Organic solvent resistance: described in words
Alcohol | Good
SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Chemical Item/Class, Alcohol agent/result cells - Organic solvent resistance: described in words
Ketone | Bad
SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Chemical Item/Class, Ketone agent/result cells - Oil and grease resistance: described in words
Petroleum Fuels | Excellent
SUNLU, TECHNICAL DATA SHEET ISO TPU 90Ap. 2: Chemical Item/Class, Petroleum Fuels agent/result cells
Eryone TPU 90AStrength XY, MPa23.7Strength Z, MPa—Modulus XY, GPa0.027Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–220Bed, °C0–60Chamber, °CnoneDrying, °C, h658 h
Eryone TPU 90AEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) TPU 90A8 values | |||
| Tensile modulus XY | 27 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=220 ° C, printing speed=40mm/s, base plate 55° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 23.7 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220 ° C, printing speed=40mm/s, base plate 55° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 573.9 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220 ° C, printing speed=40mm/s, base plate 55° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile stress at 100 % elongation orientation not stated | 8 MPap. 2: 100% Modulus | ASTM D412 | |
| Tensile stress at 300 % elongation orientation not stated | 11 MPap. 2: 300% Modulus | ASTM D412 | |
| HDT at 0.45 MPa | 70 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | |
| Density | 1.2 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 36 g/10minp. 1: Melt Index(g/10 min) 210 ° C, 2.16 kg g/10min | no standard namedAs the sheet prints it: g/10 min 210 ° C 2.16 kg | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200-220 ℃; Bed 0-60℃; Drying 65℃, 8HEryone, Technical Data Sheet (TDS) TPU 90Ap. 1: Recommended printing settings; p. 1: Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
Ideal for making shock-absorbing electronic cases, ergonomic medical supports
Eryone, Technical Data Sheet (TDS) TPU 90Ap. 1 - Benefits
ERYONE TPU 90A is a 3D printing filament designed for applications requiring top-tier flexibility and durability.
Eryone, Technical Data Sheet (TDS) TPU 90Ap. 1 - Benefits
Softer than stiffer variants in the same series, it also offers enhanced wear and flexural fatigue resistance.
Eryone, Technical Data Sheet (TDS) TPU 90Ap. 1 - Benefits
Even under repeated compression and high-frequency bending, it retains elasticity and structural stability, resisting cracking and performance loss.
Eryone, Technical Data Sheet (TDS) TPU 90Ap. 1 - Benefits
Compatible with mainstream FDM 3D printers, it ensures smooth, clog-free printing.
Eryone, Technical Data Sheet (TDS) TPU 90Ap. 1 - Pitfalls and limitations
Note: Cannot be used with AMS
Eryone, Technical Data Sheet (TDS) TPU 90Ap. 1
Polymaker PolyFlex TPU90Strength XY, MPa30Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–230Bed, °C25–60Chamber, °CnoneDrying, °C, h708 h
Polymaker PolyFlex TPU90Polymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, PolyFlex TPU905 valuesThe same values also in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90, Polymaker, PolyFlex™ TPU90 and Polymaker, PolyFlex™ TPU90 Technical Data Sheet.Unless a row says otherwise:print settingsPrinting temperature 220 °C Bed temperature 50 °C Shell 2 Top & bottom layer 4 Infill 100% Environmental temperature 25 °C Cooling fan ON The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes | |||
| Tensile strength (yield or break not stated) XY | 30.0 ± 0.66 MPap. 3: Tensile strength (X-Y)also in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90 | ISO 37, GB/T 528moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Elongation at break XY | 586.8 ± 15.3 %p. 3: Elongation at break (X-Y)also in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90 | ISO 37, GB/T 528moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Tensile stress at 100 % elongation XY | 6.17 ± 0.19 MPap. 3: Mechanical Properties, 100% modulus (X-Y); p.4 HOW TO MAKE SPECIMENSalso in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90 | ISO 37, GB/T 528moistureAll specimens were conditioned at room temperature for 24h prior to testing | |
| Density | 1.12 g/cm3p. 2: Densityalso in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90also in Polymaker, PolyFlex™ TPU90 | ISO 1183, GB/T 1033 | |
| Water absorption | 0.67 %p. 2: Equilibrium water absorption (%)also in Polymaker, PolyFlex™ TPU90 Technical Data Sheet | no standard namedAs the sheet prints it: Equilibrium water absorption | |
Polymaker, PolyFlex TPU90 Technical Data Sheet V5.55 valuesUnless a row says otherwise: printed specimenprint settingsPrinting temperature 230 °C; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | |||
| Tensile strength (yield or break not stated) XY | 30.1 ± 2.4 MPap. 3: Mechanical Properties, Tensile strength (X-Y); HOW TO MAKE SPECIMENS and tensile specimen ISO37 | ISO 37, GB/T 528 | not in the median: another value of this product is in it |
| Elongation at break XY | 592.1 ± 32.9 %p. 3: Mechanical Properties, Elongation at break (X-Y); HOW TO MAKE SPECIMENS and tensile specimen ISO37 | ISO 37, GB/T 528 | not in the median: another value of this product is in it |
| Tensile stress at 100 % elongation XY | 7.1 ± 0.3 MPap. 3: Mechanical Properties, Stress at 100% strain (X-Y); HOW TO MAKE SPECIMENS and tensile specimen ISO37 | ISO 37, GB/T 528 | |
| Tensile stress at 200 % elongation XY | 9.0 ± 0.9 MPap. 3: Mechanical Properties, Stress at 200% strain (X-Y); HOW TO MAKE SPECIMENS and tensile specimen ISO37 | ISO 37, GB/T 528 | |
| Tensile stress at 300 % elongation XY | 13.2 ± 0.6 MPap. 3: Mechanical Properties, Stress at 300% strain (X-Y); HOW TO MAKE SPECIMENS and tensile specimen ISO37 | ISO 37, GB/T 528 | |
| Polymaker, PolyFlex™ TPU903 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) XY | 12.1 ± 0.82 MPap. 6: Tensile strength (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Elongation at break XY | 638.8 ± 15.5 %p. 6: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Tensile stress at 100 % elongation XY | 3.40 ± 0.42 (MPa)p. 6: 100% modulus (X-Y) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040) | |
| Polymaker, PolyFlex™ TPU90 Technical Data Sheet3 valuesThe same values also in Polymaker, PolyFlex TPU90, Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90 and Polymaker, PolyFlex™ TPU90.Unless a row says otherwise: specimen not stated | |||
| Hardness | 90 Shore Ap. 1: Shore hardness ISO 7619-1, GB/T 531.1also in Polymaker, PolyFlex TPU90also in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90also in Polymaker, PolyFlex™ TPU90 | ISO 7619, GB/T 531.1As the sheet prints it: 7619-1 ISO 7619-1 GB/T 531.1 | in the median |
| Tensile stress at 400 % elongation XY | 19.0 ± 0.9 MPap. 1: Stress at 400% strain (X-Y) | printed specimen, ISO 37, GB/T 528 | |
| Density | 1.21 g/cm3p. 1: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU901 valueThe same values also in Polymaker, PolyFlex™ TPU90 Technical Data Sheet and Polymaker, PolyFlex™ TPU90. | |||
| Melt mass-flow rate | 6.1 g/10 minp. 1: Melt index 185 °C, 1.2 kgalso in Polymaker, PolyFlex™ TPU90 Technical Data Sheetalso in Polymaker, PolyFlex™ TPU90 | no standard namedAs the sheet prints it: 185 °C 1.2 kg | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): heated chamber in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90; drying in Polymaker, Polymaker PolyFlex TPU90 official product page.
Its 6 print profiles, in the documents' words
- Nozzle 210 - 230 (℃); Bed 25 - 60 (˚C); Chamber Room temperaturePolymaker, PolyFlex TPU90Recommended printing settings; p. 3: Footnote to printing conditions
- Nozzle 210 - 230 (˚C); Bed 25 - 60 (˚C); Chamber Room temperature - 45 (˚C)Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90p. 1: Recommended printing settings: Nozzle temperature; p. 1: Build Surface material; p. 1: Footnote to printing conditions
- Nozzle 210-230°C; Bed 25-60°C; Drying 70°C/8HPolymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
- Nozzle 210°C - 230°C; Bed 25°C - 60°C; Drying 70˚C for 12hPolymaker, PolyFlex™ TPU90p. 6: Recommended printing settings; p. 6: Drying settings; p. 4: Prepare the printer: build surface
- Nozzle 210 – 230 (℃); Bed 25 - 60 (˚C); Drying 70˚C for 8hPolymaker, PolyFlex TPU90 Technical Data Sheet V5.5p. 3: Nozzle temperature; p. 3: Build surface treatment; p. 3: Build plate temperature; p. 3: Closure Chamber; p. 3: Drying setting; p. 3: Footnote
- Nozzle 210˚C - 230˚C; Bed 25˚C - 60˚C; Drying 70˚C for 8h (Only if the material has absorbed moisture)Polymaker, Polymaker PolyFlex TPU90 official product pagep. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings; p. 1: Enclosure
Price
Not in the price sample.
Its 7 documents
- Polymaker, PolyFlex TPU90
- Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90
- Polymaker, PolyFlex™ TPU90 Technical Data Sheet
- Polymaker, PolyFlex™ TPU90
- Polymaker, PolyFlex TPU90 Technical Data Sheet V5.5
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- Polymaker, Polymaker PolyFlex TPU90 official product page
What the maker says (15)
- Printing advice
It is recommended to slightly increase the extrusion multiplier (+0.2) to ensure a more consistent extrusion.
Polymaker, PolyFlex™ TPU90p. 4 - Moisture sensitivity
It is recommended to store PolyFlex™ TPU90 in the PolyBox™ to prevent moisture absorption which will lower the quality and the mechanical properties of the print.
Polymaker, PolyFlex™ TPU90p. 5 - Benefits
PolyFlex™ TPU90, created from Covestro’s Addigy® family, is a thermoplastic polyurethane (TPU) based filament designed to provide great flexibility without compromising on printing speed.
Polymaker, PolyFlex™ TPU90p. 6 - Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, PolyFlex TPU90p. 3 - Benefits
PolyFlex™ TPU90, created from Covestro’s Addigy® family, is a thermoplastic polyurethane (TPU) based filament designed to provide great flexibility without compromising on printing speed.
Polymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1 - Pitfalls and limitations
Fair
Polymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1: Effect of weak acids Fair - Pitfalls and limitations
Poor
Polymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1: Effect of strong acids Poor - Pitfalls and limitations
Effect of weak alkalis Fair
Polymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis - Pitfalls and limitations
Effect of strong alkalis Poor
Polymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis - Pitfalls and limitations
Effect of oils and grease Good
Polymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease - Good for
Choose PolyFlex™ TPU90 for projects like phone cases, watch straps, or any part that demands softness, flexibility, and comfort.
Polymaker, Polymaker PolyFlex TPU90 official product pagep. 1: Description, intended uses - Printing advice
Direct extruder with a gear ratio mechanical advantage required.
Polymaker, Polymaker PolyFlex TPU90 official product pagep. 1: Printing Requirements - Pitfalls and limitations
Will be very difficult to print with a small nozzle diameter..
Polymaker, Polymaker PolyFlex TPU90 official product pagep. 1: Printing Requirements, nozzle limitation - Pitfalls and limitations
✓ ISO 10993 Skin Safe Tested
Polymaker, Polymaker PolyFlex TPU90 official product pagep. 1: Key features, skin badge - Pitfalls and limitations
Drying 50°C for 6h
Polymaker, Polymaker PolyFlex TPU90 official product pagep. 1: Technical summary, drying
Chemicals and environment (14)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, PolyFlex TPU90Effect of weak acids - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, PolyFlex TPU90Effect of strong acids - Alkali resistance: not resistant
Not resistant
Effect of weak alkalis · weakPolymaker, PolyFlex TPU90Effect of weak alkalis - Alkali resistance: not resistant
Not resistant
Effect of strong alkalis · strongPolymaker, PolyFlex TPU90Effect of strong alkalis - Organic solvent resistance: no data
No data available
Effect of organic solventPolymaker, PolyFlex TPU90Effect of organic solvent - Oil and grease resistance: no data
No data available
Effect of oils and greasePolymaker, PolyFlex TPU90Effect of oils and grease - UV and outdoor: described in words
It also have the ability to resist ultra-violet (UV) light or sunlight.
UVPolymaker, PolyFlex™ TPU90p. 6 - UV and outdoor: described in words
It also has the ability to resist ultra-violet (UV) light or sunlight.
UVPolymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU90p. 1 - UV and outdoor: described in words
It also has the ability to resist ultra-violet (UV) light or sunlight.
UVPolymaker, PolyFlex™ TPU90 Technical Data Sheetp. 1 - Acid resistance: limited
Fair
Effect of weak acids · weakPolymaker, PolyFlex TPU90 Technical Data Sheet V5.5p. 2: CHEMICAL RESISTANCE DATA, Effect of weak acids - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, PolyFlex TPU90 Technical Data Sheet V5.5p. 2: CHEMICAL RESISTANCE DATA, Effect of strong acids - Alkali resistance: limited
Fair
Effect of weak alkalis · weakPolymaker, PolyFlex TPU90 Technical Data Sheet V5.5p. 2: CHEMICAL RESISTANCE DATA, Effect of weak alkalis - Alkali resistance: not resistant
Poor
Effect of strong alkalis · strongPolymaker, PolyFlex TPU90 Technical Data Sheet V5.5p. 2: CHEMICAL RESISTANCE DATA, Effect of strong alkalis - Oil and grease resistance: resistant
Good
Effect of oils and greasePolymaker, PolyFlex TPU90 Technical Data Sheet V5.5p. 2: CHEMICAL RESISTANCE DATA, Effect of oils and grease
Fillamentum Flexfill TPU 92AStrength XY, MPa49Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–240Bed, °C50–60Chamber, °C—Drying, °C, h80≥ 3 h
Fillamentum Flexfill TPU 92AFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, Flexfill TPU 92A7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile break strength orientation not stated | 49 MPap. 1: Tensile strength | DIN 53504 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 600 %p. 1: Elongation at break | DIN 53504 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 91 Shore Ap. 1: Hardness | ISO 7619 | in the median |
| Tear strength orientation not stated | 85 kN/mp. 1: Tear strength | ISO 34As the sheet prints it: ISO 34-1 | |
| Tensile stress at 100 % elongation orientation not stated | 7,5 MPap. 1: Tensile stress (7,5 MPa) | DIN 53504As the sheet prints it: DIN 53504; 100% elongation | |
| Tensile stress at 300 % elongation orientation not stated | 16 MPap. 1: Tensile stress (16 MPa) | DIN 53504As the sheet prints it: DIN 53504; 300% elongation | |
| Density | 1,20 g/cm3p. 1: Material density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill types1 value | |||
| Hardness | 92 Shore Ap. 1: hardness 92 Shore A (description) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for ≥ 3 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 220–240 °C; Bed 50–60 °CFillamentum, Flexfill TPU 92Ap. 1: Recommended printing settings; p. 1: Bed adhesive
- Drying 80 °C; minimum drying time 3 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row FLEXFILL TPU 92A; own minimum-time/temperature/need columns, with p1 restrictions
Price
Not in the price sample.
Its 4 documents
What the maker says (20)
- Good for
Thanks to its flexibility, it works perfectly for sealings and repeatedly bending applications.
Fillamentum, Flexfill TPU 92Ap. 1 - Benefits
The printed objects have also high abrasion and chemical resistance.
Fillamentum, Flexfill TPU 92Ap. 1 - Adhesion between layers
Great adhesion of layers insures good tear strength in all directions.
Fillamentum, Flexfill TPU 92Ap. 1 - Pitfalls and limitations
WATER BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: WATER exact product column - Pitfalls and limitations
CAR FLUIDS BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: CAR FLUIDS exact product column - Moisture sensitivity
Note: For Flexfill TPU material, we recommend a maximum of 3 drying cycles of 3 hours, after which thermal degradation manifested by yellowing may occur.
Fillamentum, Drying of filaments before processing on 3D printerp. 1 - Moisture sensitivity
FLEXFILL TPU 92A 3 h 80 °C 5 stringing, under-extrusion, clogged nozzle
Fillamentum, Drying of filaments before processing on 3D printerp. 2 - Benefits
Thermoplastic polyurethane with hardness 92 Shore A is a technical flexible filament that offers great mechanical properties such as high tear and tensile strength.
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Benefits
Flexfill TPU 92A is a very flexible, elastic and easily bendable material, which maintains these properties even at low temperatures.
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Benefits
Due to its lower hardness, it is softer and more flexible than other TPU filaments.
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Good for
This material is great for printing products that require flexibility, strength and durability, such as protective corners, covers, gaskets, dampers, flexible joints and other parts.
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Benefits
EXCELLENT ABRASION RESISTANCE
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Benefits
GOOD REBOUND RESILIENCE
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Benefits
GREAT IMPACT RESISTANCE
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Benefits
HIGH ELASTICITY AND FLEXIBILITY
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Benefits
TEMPERATURE RESISTANCE -40 TO 80 °C
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Good for
IDEAL FOR PROTOTYPING FLEXIBLE COMPONENTS
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 1 - Printing advice
For better chemical resistance, it is recommended to use more perimeters,
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 2 - Printing advice
bottom/top layers, higher temperature of printing to achieve good tightness.
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 2 - Printing advice
Always try a little printed object first!
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp. 2
Chemicals and environment (8)
- Organic solvent resistance: described in words
BAD
Acetone · Acetone · specificFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ACETONE row, exact TPU92A column; own legend and full conditions - Organic solvent resistance: resistant
GOOD
Ethanol · Ethanol · specificFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ETHANOL row, exact TPU92A column; own legend and full conditions - Organic solvent resistance: described in words
BAD
Effect of organic solventFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ALCOHOLS row, exact TPU92A column; own legend and full conditions - Oil and grease resistance: resistant
GOOD
Effect of oils and greaseFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: OILS row, exact TPU92A column; own legend and full conditions - Oil and grease resistance: resistant
GOOD
Effect of oils and greaseFillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: GREASES row, exact TPU92A column; own legend and full conditions - Acid resistance: described in words
BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ACIDS row, exact TPU92A column; own legend and full conditions - Alkali resistance: described in words
BAD
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 CHEMICAL RESISTANCE: ALKALIS row, exact TPU92A column; own legend and full conditions - Food contact claims: described in words
FLEXFILL TPU 92A is not suitable for food contact.
Fillamentum, Flexfill TPU92A Additional information; chemical matrix explicitly covers all Flexfill typesp.2 FOOD CONTACT, exact TPU92A exclusion
FormFutura ReForm rTPU 90AStrength XY, MPa29.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C60–80Chamber, °CnoneDrying, °C, h50–7024 h
FormFutura ReForm rTPU 90AFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90A5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 29,5 MPap. 1: Tensile strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 355%p. 1: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 90A Shore Ap. 1: Shore A hardness | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Melting temperature | 165 °Cp. 1: Melting Point | no standard stated | |
| Density | 1,21 g/cm³p. 1: Specific Gravity (23°C) | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–70 °C for 24 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle ± 220 - 250°C; Bed ± 60 - 80°C; Drying 24 hours @ ~50-70 °CFormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1: Nozzle temp, Heat bed, Enclosure, Drying; p. 1: Buildplate adhesion
Price
Not in the price sample.
Its 2 documents
What the maker says (10)
- Good for
Automotive applications – Dust covers, bellows, flexible mounts, cable management components.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Good for
It is engineered for 3D printing general-purpose flexible parts where toughness and wear resistance are needed.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Good for
ReForm rTPU 90A is ideal for producing shock-absorbing, abrasion-resistant, and semi-flexible 3D printed parts.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Good for
Wearable parts – phone cases, watch straps, insoles, orthopedic support.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Good for
Protective components – bumpers, gaskets, vibration dampers, shock absorbers, seals.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Good for
Industrial prototypes and functional parts – flexible hinges, grips, tubing, connectors.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Benefits
Made with nearly 100% recycled TPU from certified and traceable European sources.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Benefits
Superior shock absorption and vibration damping.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Benefits
This recycled TPU filament strikes a balance between flexibility, elasticity, and dimensional accuracy during 3D printing.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1 - Benefits
Durable with excellent abrasion- and tear resistance.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 90Ap. 1
Spectrum S-Flex 90AStrength XY, MPa35Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg96Nozzle, °C200–230Bed, °C50–70Chamber, °CnoneDrying, °C, h853 h
Spectrum S-Flex 90ASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET S-Flex 90A5 valuesThe same values also in Spectrum, TECHNICAL DATA SHEET S-Flex 90A.Unless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 35 MPap. 1: Tensile Strength (Machine Direction) | DIN 53504 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 500,00 %p. 1: Elongation at Rupture (Machine Direction) | DIN 53515 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 90 Shore Ap. 1: Shore hardness A | DIN 53505 | in the median |
| Abrasion loss orientation not stated | 35 mm3p. 1: Abrasion Resistance | DIN 53516 | |
| Density | 1,22 g/cm3p. 1: Densityalso in Spectrum, TECHNICAL DATA SHEET S-Flex 90A | DIN 53479 | |
| Spectrum, TECHNICAL DATA SHEET S-Flex 90A2 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) along the melt flow | 35 MPap. 1: Tensile Strength (Machine Direction) | DIN 53504 | not in the median: measured on a bar in another orientation |
| Abrasion loss | 35 mm3p. 1: Abrasion Resistance | DIN 53516 | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| HDT at 0.45 MPa | 74°Cphysically implausiblep. 4: HDT B | no standard namedAs the sheet prints it: method=B | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 85 °C for 3 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 5 print profiles, in the documents' words
- Nozzle 200-230°C; Bed 50-70°CSpectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Nozzle 200-230°C; Bed 50-70°CSpectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Bed 50-70 °CSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Bed temp. [°C]; p. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Drying 85°C, 3h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
96 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 96 CAD/kgLime Green - Spectrum S-Flex 90A Filament - 1.75mm, 0.5kg (SKU 67bbb50fb55b6)in its price; seen 30 Sep 2026
Its 6 documents
- Spectrum, TECHNICAL DATA SHEET S-Flex 90A
- Spectrum, TECHNICAL DATA SHEET S-Flex 90A
- Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29
- Spectrum, Filament drying - Spectrum Filaments
What the maker says (11)
- Benefits
reduced stringing while the printer is running idle
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Benefits
Spectrum S-Flex 90A is a filament designed for 3D printing, which enables to manufacture flexible items in a much simpler way than with other materials of this type.
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Benefits
S-Flex 90A material is also characterized by good resistance to UV radiation and high resistance to aging.
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Benefits
Flexible filament S-Flex 90A shows resistance to weak and diluted acids and bases.
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Benefits
very good wear and tear resistance
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Benefits
stability of shape and material properties in the temperature range -30 to + 60°C
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Warping and shrinkage
low shrinkage
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Surface finish
high quality surface
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Adhesion between layers
The appropriate composition of the material provides for good adhesion both between layers and between the printed item and the build platform.
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET S-Flex 90Ap. 1 - Benefits
Up to 500% elongation at break, Shore 90A, oils & chemical resistance
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
FormFutura Python Flex TPU 90AStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C0–60Chamber, °C—Drying, °C, hdry first
FormFutura Python Flex TPU 90AFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Python Flex TPU 90A3 valuesUnless a row says otherwise: specimen not stated | |||
| Abrasion loss | 35 mm³p. 1: Abrasion resistance | DIN 53516 | |
| HDT at 0.45 MPa | 74°Cphysically implausiblep. 1: HDT-B | no standard namedAs the sheet prints it: method=HDT-B | |
| Density | 1.22 g/cm3p. 1: Density | DIN 53479 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- required, schedule not statedown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): drying in FormFutura, Python Flex TPU 90A.
Its 2 print profiles, in the documents' words
- Drying Drying recommendedFormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1: Drying recommended
- Nozzle ± 220 – 250° C; Bed ± 0 – 60° C; Drying When the filament is too wet it is recommended to dry Python Flex in an oven or filament drying machine at 65C for approximately 6 hours.FormFutura, Python Flex TPU 90Ap. 1: General printing guidelines; Hygroscopy
Price
Not in the price sample.
Its 3 documents
What the maker says (26)
- Good for
Snap-fit applications.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Good for
Various Orthopedic applications.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Benefits
Python Flex TPU 90A is an easy to 3D print flexible filament.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Benefits
It shows not only great resistance to wear, tear, and abrasion.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Benefits
Good resistance to chemicals and oils.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Adhesion between layers
Python Flex TPU 90A shows good adhesion to the print bed and between layers.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Moisture sensitivity
For optimal printing results it is recommended to dry the filament before usage and even 3D print from a dry box for larger prints.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Moisture sensitivity
TPU is a hygroscopic thermoplastic material and will attract and hold water molecules from the surrounding environment.
FormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1 - Good for
Python Flex TPU 90A is a very flexible type of 3D printer filament with a shore hardness of 90A and is perfect for 3D printing strong and resilient parts that require both flexibility and elasticity.
FormFutura, Python Flex TPU 90Ap. 1 - Benefits
Python Flex TPU 90A is an easy to print flexible filament.
FormFutura, Python Flex TPU 90Ap. 1 - Adhesion between layers
Python Flex TPU 90A shows good adhesion to the print bed and has perfect inter-layer adhesion.
FormFutura, Python Flex TPU 90Ap. 1 - Good for
This industrial-grade TPU is designed for mechanical applications whereby resistance to wear, tear and abrasion are important.
FormFutura, Python Flex TPU 90Ap. 1 - Benefits
The filament also features good resistance to chemicals and UV radiation.
FormFutura, Python Flex TPU 90Ap. 1 - Benefits
Good resistance to chemicals and oils
FormFutura, Python Flex TPU 90Ap. 1 - Benefits
Resistant to wear, tear, and abrasion
FormFutura, Python Flex TPU 90Ap. 1 - Good for
Manufacturing seals and gaskets
FormFutura, Python Flex TPU 90Ap. 1 - Good for
Protective bumpers and vibration dampers
FormFutura, Python Flex TPU 90Ap. 1 - Good for
Snap-fit applications
FormFutura, Python Flex TPU 90Ap. 1 - Good for
Various Orthopedic applications
FormFutura, Python Flex TPU 90Ap. 1 - Good for
3D printing sleeves and hinges
FormFutura, Python Flex TPU 90Ap. 1 - Moisture sensitivity
Python Flex is a very hygroscopic material and will attract and hold water molecules from the surrounding environment.
FormFutura, Python Flex TPU 90Ap. 1 - Moisture sensitivity
When opened and exposed to humidity too long this can have a negative effect on the printing behaviour and quality of the filament.
FormFutura, Python Flex TPU 90Ap. 1 - Moisture sensitivity
It is therefore strongly recommended to immediately remove the spool from the printer after printing and store it in a vacuum bag or airtight container without silica.
FormFutura, Python Flex TPU 90Ap. 1 - Moisture sensitivity
When the filament is too wet it is recommended to dry Python Flex in an oven or filament drying machine at 65C for approximately 6 hours.
FormFutura, Python Flex TPU 90Ap. 1 - Moisture sensitivity
Drying times can depend on how long the filament has been exposed to humidity.
FormFutura, Python Flex TPU 90Ap. 1 - Moisture sensitivity
Python Flex is packaged in a vacuum bag with a guaranteed moisture content of less than 0,2% to ensure ideal printing behaviour and results directly after opening the spool.
FormFutura, Python Flex TPU 90Ap. 1
Chemicals and environment (1)
- UV and outdoor: described in words
This flexible filament also features good resistance to chemicals and UV radiation.
UVFormFutura, Technical Data Sheet Python Flex TPU 90Ap. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.