PEEK-CF
Beyond H2C capability. Kept for reference, never a candidate: it needs more heat than the H2C gives.
5 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
5 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- not published
How the numbers are worked out
3DXTECH CarbonX Carbon Fiber PEEKStrength XY, MPa105Modulus XY, GPa8.1Charpy notched, kJ/m²—HDT 0.45, °C265Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
3DXTECH CarbonX Carbon Fiber PEEK3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber PEEK 3D Printing Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 400°C Bed Temp: 140°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 8100 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 105 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 3 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 8300 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 136 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 265 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66psi) | in the median |
| Glass transition temperature | 143 °Cp. 1: Glass Transition Temperature (Tg) DSC °C | DSCAs the sheet prints it: Tg DSC °C | in the median |
| Density | 1.39 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
| 3DXTECH, CarbonX Carbon Fiber PEEK safety data sheet1 value | |||
| Fibre content | < 15 %p. 1: Carbon Fiber | no standard stated | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber PEEK 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
3DXTECH CarbonX 20% Carbon Fiber PEEKStrength XY, MPa126Modulus XY, GPa10.1Charpy notched, kJ/m²—HDT 0.45, °C305Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
3DXTECH CarbonX 20% Carbon Fiber PEEK3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ 20% Carbon Fiber PEEK 3D Printing Filament9 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 420°C Bed Temp: 140°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 10,100 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 126 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 1.9 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 11,200 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 145 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT | 305 °Ctranscription correctedp. 1: Heat Deflection Temperature at ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), no stated test load |
| Glass transition temperature | 143 °Cp. 1: Glass Transition Temperature DSC °C | DSCAs the sheet prints it: DSC Tg | in the median |
| Density | 1.39 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
| Fibre content | 20% Carbon Fiber PEEKp. 1: Fibre content | specimen not stated, no standard statedprint settings not stated | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: CarbonX™ 20% Carbon Fiber PEEK 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
Price
Not in the price sample.
Its 2 documents
iSANMATE CF PEEKStrength XY, MPa112Modulus XY, GPa6Charpy notched, kJ/m²—HDT 0.45, °C—Nozzle, °C380–420Bed, °C130–150Chamber, °C90–150Drying, °C, h—
iSANMATE CF PEEKiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, CF-PEEK Technical Data Sheet(TDS)6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 6000 MPap. 1: Modulus of Elasticity 1 mm/min DIN EN ISO 527-2 (Tensile Test) | ISO 527As the sheet prints it: 1 mm/min DIN EN ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 112 MPap. 1: Tensile Strength 50 mm/min DIN EN ISO 527-2 | printed specimen (implied by the document), ISO 527As the sheet prints it: 50 mm/min DIN EN ISO 527-2 | in the median |
| Elongation at break orientation not stated | 10 %p. 1: Elongation at Break 50 mm/min DIN EN ISO 527-2 | ISO 527As the sheet prints it: 50 mm/min DIN EN ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 147 °Cp. 1: Glass Transition DIN EN ISO 11357 Temperature | ISO 11357 | in the median |
| Melting temperature | 341 °Cp. 1: Melting Temperature DIN EN ISO 11357 | ISO 11357 | |
| Fibre content | 10% carbon fiber contentp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 380–420 °Cown data sheet
- Bed
- 130–150 °Cown data sheet
- Heated chamber
- 90–150 °Cown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 380 -420 °C; Bed 130 -150 °C; Chamber 90-150 °CiSANMATE, CF-PEEK Technical Data Sheet(TDS)p. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
At present, it often used in demanding applications such as aerospace, automotive, electronic conductor.
iSANMATE, CF-PEEK Technical Data Sheet(TDS)p. 1 - Benefits
It has excellent chemical resistance, mechanical properties, and thermal properties.
iSANMATE, CF-PEEK Technical Data Sheet(TDS)p. 1 - Adhesion between layers
At the same time, it is lighter than PEEK, having better interlayer adhesion and better temperature resistance.
iSANMATE, CF-PEEK Technical Data Sheet(TDS)p. 1 - Adhesion between layers
having excellent interlayer adhesion, and able to improve the strength and shock resistance of the prototype.
iSANMATE, CF-PEEK Technical Data Sheet(TDS)p. 1
Filament2Print TECAFIL PEEK EV CF30 black - 1.75 mmStrength XY, MPa169Modulus XY, GPa17.3Charpy notched, kJ/m²—HDT 0.45, °C—Nozzle, °C420–460Bed, °C160–250Chamber, °C160–230Drying, °C, h1208 h
Filament2Print TECAFIL PEEK EV CF30 black - 1.75 mmFilament2Print
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Filament2Print, TECAFIL PEEK EV CF30 black - 1.75 mm - Filament18 values | |||
| Tensile modulus XY | 17310,0 MPap. 1: Modulus of elasticity | ISO 527 | in the median |
| Tensile modulus XZ | 19963,0 MPap. 1: Modulus of elasticity 5mm/min, Orientation XZ | ISO 527As the sheet prints it: 5mm/min Orientation XZ ISO 527-2 | not in the median: measured on a bar in another orientation |
| Tensile modulus ZX | 4164,8 MPap. 1: Modulus of elasticity (tensile test) | ISO 527As the sheet prints it: DIN EN ISO 527-2; rate=5 mm/min; printer=Kumovis R1 | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) XY | 169,0 MPap. 1: Tensile strength 5mm/min, Orientation XY | ISO 527As the sheet prints it: 5mm/min Orientation XY ISO 527-2 | in the median |
| Tensile strength (yield or break not stated) XZ | 196,5 MPap. 1: Tensile strength | ISO 527 | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) ZX | 71,0 MPap. 1: Tensile strength 5mm/min, Orientation ZX | ISO 527As the sheet prints it: 5mm/min Orientation ZX ISO 527-2 | not in the median: measured on a bar in another orientation |
| Elongation at break XY | 2,7 %p. 1: Elongation at break (tensile test) | ISO 527 | in the median |
| Elongation at break ZX | 3,8 %p. 1: Elongation at break (tensile test) 5mm/min, Orientation ZX | ISO 527As the sheet prints it: tensile test 5mm/min Orientation ZX ISO 527-2 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 2,6 %p. 1: Elongation at yield (tensile test) 5mm/min, Orientation XY | ISO 527As the sheet prints it: tensile test 5mm/min Orientation XY ISO 527-2 | listed under other properties |
| Elongation at yield XZ | 2,6 %p. 1: Elongation at yield (tensile test) | ISO 527 | listed under other properties |
| Elongation at yield ZX | 3,7 %p. 1: Elongation at yield (tensile test) 5mm/min, Orientation ZX | ISO 527As the sheet prints it: tensile test 5mm/min Orientation ZX ISO 527-2 | listed under other properties |
| Charpy impact strength | 55,0 kJ/m2p. 1: Impact strength (Charpy) | ISO 179unnotched | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 162 °Cp. 1: Deflection temperature | ISO 75As the sheet prints it: HDT-A ISO-R 75 Method A | not in the median: measured on a moulded bar |
| Glass transition temperature | 143 °Cp. 1: Glass transition temperature | no standard stated | not in the median: the resin supplier's value, not a printed part |
| Melting temperature | 343 °Cp. 1: Melting temperature | ISO 11357 | |
| Water absorption | 0,5 %p. 1: Moisture absorption | ISO 62 | |
| Melt mass-flow rate | 2,9 g/10 minp. 1: Melt flow index (MFI) 380°C / 5kg | ISO 1133As the sheet prints it: MFI 380°C / 5kg ISO 1133 | |
| Fibre content | 30% carbon fibresp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 420–460 °Cown data sheet
- Bed
- 160–250 °Cown data sheet
- Heated chamber
- 160–230 °Cown data sheet
- Drying
- 120 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 420 - 460 °C; Bed 160 - 250 °C; Chamber 160 - 230 °C; Drying 120 °C; Drying time 8 hFilament2Print, TECAFIL PEEK EV CF30 black - 1.75 mm - Filamentp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
oil and gas industry automotive industry chemical technology mechanical engineering aircraft and aerospace technology
Filament2Print, TECAFIL PEEK EV CF30 black - 1.75 mm - Filamentp. 1 - Benefits
inherent flame retardant
Filament2Print, TECAFIL PEEK EV CF30 black - 1.75 mm - Filamentp. 1 - Benefits
hydrolysis and superheated steam resistant
Filament2Print, TECAFIL PEEK EV CF30 black - 1.75 mm - Filamentp. 1 - Warping and shrinkage
high dimensional stability
Filament2Print, TECAFIL PEEK EV CF30 black - 1.75 mm - Filamentp. 1 - Moisture sensitivity
To achieve optimum mechanical properties, it is recommended to pre-dry the material with the above mentioned parameters.
Filament2Print, TECAFIL PEEK EV CF30 black - 1.75 mm - Filamentp. 1
LEHVOSS LUVOCOM 3F PEEK CF 9676 BKStrength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²12HDT 0.45, °C—Nozzle, °C450–520Bed, °C≥ 50Chamber, °C—Drying, °C, h—
LEHVOSS LUVOCOM 3F PEEK CF 9676 BKLEHVOSS
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PEEK CF 9676 BK13 values | |||
| Tensile modulus orientation not stated | 10 GPap. 1: Modulus of elasticity dry, @1 mm/min ISO 527 MPTS ISO 3167 A GPa | ISO 527, ISO 3167As the sheet prints it: 1 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) orientation not stated | 145 MPap. 1: Tensile strength dry, @50 mm/min ISO 527 MPTS ISO 3167 A MPa | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strain at strength orientation not stated | 3,4 %p. 1: Elongation at maximum force dry, @50 mm/min ISO 527 MPTS ISO 3167 A % | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | listed under other properties |
| Charpy impact strength | 90 kJ/m²p. 1: Charpy impact strength dry ISO 179 1eU 80x10x4mm kJ/m² | ISO 179As the sheet prints it: 1eU 80x10x4mm ISO 179 | not in the median: unnotched |
| Charpy impact strength | 12 kJ/m²p. 1: Charpy impact strength, notched dry ISO 179 1eA 80x10x4mm kJ/m² | ISO 179As the sheet prints it: dry 1eA 80x10x4mm ISO 179 | not in the median: the only value of its test, shown as published |
| HDT at 1.8 MPa | 280 °Cp. 1: Heat distortion temperature HDT A ISO 75 molded sample °C | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Melting temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Melt temperature °C | no standard stated | |
| Continuous service temperature | 250 °Cp. 1: Continuous service temperature 20.000 h IEC 60216 MPTS ISO 3167 A °C | IEC 60216, ISO 3167As the sheet prints it: 20.000 h MPTS A IEC 60216 ISO 3167 | |
| Density | 1,34 g/cm³p. 1: Specific gravity ISO 1183-3 g/cm³ | ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0,1 %p. 1: Water absorption 23°C / 24h ISO 62 MPTS ISO 3167 A % | ISO 62, ISO 3167As the sheet prints it: 23°C / 24h MPTS A ISO 62 ISO 3167 | |
| Melt mass-flow rate | 16 g/10 minp. 1: Melt flow rates (MFR) 380°C / 10kg ISO 1133 pellet g/10 min | ISO 1133As the sheet prints it: MFR 380°C / 10kg pellet ISO 1133 | |
| Melt volume-flow rate | 14 cm³/10 minp. 1: Melt volume rate (MVR) 380°C / 10kg ISO 1133 pellet cm³/10 min | ISO 1133As the sheet prints it: MVR 380°C / 10kg pellet ISO 1133 | |
| Surface resistivity | 10⁹ Ωp. 1: Surface resistance ROB DIN IEC 60093 Ronde 60x4mm Ω | IEC 60093As the sheet prints it: 60x4mm IEC 60093 | |
| LEHVOSS, LUVOCOM-3F | LEHVOSS Compounds1 value | |||
| Fibre content | 15 %p. 1: carbon fibers | no standard stated | |
Print settings
- Nozzle
- 450–520 °Cown data sheet
- Bed
- at least 50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 450 - 520 °C; Bed > 50 °CLEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PEEK CF 9676 BKp. 2: Recommended printing settings; p. 2: General: nozzle material
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Good for
Dynamically-stressed parts.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PEEK CF 9676 BKp. 1 - Benefits
Chemically- and hydrolytically- resistant parts, non flammable.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PEEK CF 9676 BKp. 1 - Benefits
Inherent flame resistance.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PEEK CF 9676 BKp. 1 - Nozzle wear
nozzle material: abbrasion resistant
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PEEK CF 9676 BKp. 2
No product matches "".
Not published by any product: tensile strength (Z), HDT at 1.8 MPa and price.
Values are for the colour each sheet tested; pigment can change them.