ABS-AF
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- hardened nozzle
- not published
How the numbers are worked out
Spectrum ABS KevlarStrength XY, MPa35Modulus XY, GPa2.35Charpy notched, kJ/m²—HDT 0.45, °C88HDT 1.8, °C75Price, CAD/kg127Nozzle, °C250–270Bed, °C100Chamber, °CnoneDrying, °C, h804 h
Spectrum ABS KevlarSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET ABS Kevlar11 valuesThe same values also in Spectrum, KARTA TECHNICZNA ABS Kevlar and Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2350 MPap. 1: Elastic modulus (speed 1 mm/min) | ISO 527As the sheet prints it: speed 1 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 35 MPap. 1: Tensile Strength at Yield * | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 30 MPap. 1: Tensile Strength at Break * | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 6,00 %p. 1: Tensile Elongation at Break * | ISO 527 | not in the median: the only value of its test, shown as published |
| Elongation at yield orientation not stated | 1.9 %p. 1: Tensile Elongation at Yield * | ISO 527 | listed under other properties |
| Charpy impact strength | 14 kJ/m2p. 1: Charpy impact strength Unnotched, injection moulding | moulded bar (resin supplier's value), ISO 179As the sheet prints it: injection moulding ISO 179-1eU | not in the median: measured on a moulded bar |
| Charpy impact strength | 6.1 kJ/m2p. 1: Charpy impact strength Notched, injection moulding | moulded bar (resin supplier's value), ISO 179As the sheet prints it: injection moulding ISO 179-1eA | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 88 °Cp. 1: HDT 0.45 MN/m2, annealedalso in Spectrum, KARTA TECHNICZNA ABS Kevlaralso in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO | ISO 75As the sheet prints it: 0.45 MN/m2 annealed ISO 75annealed at a temperature its sheet does not state for a time its sheet does not stateannealed | in the median |
| HDT at 1.8 MPa | 75 °Cp. 1: HDT 1.81 MN/m2, annealedalso in Spectrum, KARTA TECHNICZNA ABS Kevlar | ISO 75As the sheet prints it: 1.81 MN/m2 annealed ISO 75annealed at a temperature its sheet does not state for a time its sheet does not stateannealed | in the median |
| Vicat softening temperature | 95 °Cp. 1: VICAT Softening point ** | moulded bar (resin supplier's value), ISO 306 | |
| Density | 1.05 g/cm3p. 1: Density | ISO 1183 | |
| Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–291 value | |||
| Fibre content | 10% Aramid fiber reinforcedp. 21: Fibre content | no standard stated | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 100 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 80 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- temperature not statedown data sheet
Its 5 print profiles, in the documents' words
- Nozzle 250-270°C; Bed 100°CSpectrum, TECHNICAL DATA SHEET ABS Kevlarp. 1: Recommended printing settings; p. 1: settings footnote
- Nozzle 250-270 °C; Bed 100 °C; Chamber recommended for larger printsSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 5: Nozzle temp. [°C]; p. 5: Bed temp. [°C]; p. 5: Closed chamber for printing; p. 5: Dry box recommended; p. 5: Adhesive
- Nozzle 250-270°C; Bed 100°CSpectrum, KARTA TECHNICZNA ABS Kevlarp. 1: Temperatura dyszy; p. 1: Temperatura stołu; p. 1: Suszarka do filamentu; p. 1: ustawienia oparto na dyszy o średnicy 0,4 mm
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended
- Drying 80°C, 4h; In justified casesSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
127 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 127 CAD/kgBlack - Spectrum ABS Kevlar Filament - 1.75mm, 0.75kg (SKU 67bbc237ba051)in its price; seen 30 Sep 2026
Its 6 documents
- Spectrum, TECHNICAL DATA SHEET ABS Kevlar
- Spectrum, KARTA TECHNICZNA ABS Kevlar
- Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO
- Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- Spectrum, Filament drying - Spectrum Filaments
What the maker says (6)
- Warping and shrinkage
The applied modifications led to reduced shrinkage, excellent adhesion to work platforms and reduced material density, which means that the printed elements are slightly lighter than their counterparts made with standard ABS.
Spectrum, TECHNICAL DATA SHEET ABS Kevlarp. 1 - Adhesion between layers
very strong layer lamination
Spectrum, TECHNICAL DATA SHEET ABS Kevlarp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET ABS Kevlarp. 1 - Nozzle wear
Ruby or hardened nozzle recommended
Spectrum, TECHNICAL DATA SHEET ABS Kevlarp. 1 - Benefits
10% Aramid fiber reinforced, high rigidity & impact strength, excellent dimensional stability
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21 - Warping and shrinkage
excellent dimensional stability
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21
Nanovia ABS AFStrength XY, MPa22Modulus XY, GPa1.89Charpy notched, kJ/m²17.6HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C100–110Chamber, °C90Drying, °C, h804 h
Nanovia ABS AFNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanovia8 values | |||
| Tensile modulus XY | 1890 MPap. 1: Young’s modulus (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile modulus orientation not stated | 2410 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 22 MPap. 1: Ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile strain at strength XY | 2.4 %p. 1: Elongation ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | listed under other properties |
| Tensile strain at strength orientation not stated | 1.7 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | listed under other properties |
| Charpy impact strength | 17.59 kJ/m2p. 1: Charpy (notched) | no standard stated | in the median |
| Glass transition temperature | 110 °Cp. 1: Tg | no standard stated | in the median |
| Density | 1.04 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- 90 °Cown data sheet
- Drying
- optional: 80 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240 – 260 °C; Bed 100 – 110 °C; Chamber 90 °C; Drying Dehydrate for 4h at 80°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1: Recommended printing settings: Nozzle (minimum); p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (11)
- Benefits
Create aramid fibre reinforced 3D prints that are lighter, more resistant, and easier to print compared to native ABS, thank to Nanovia ABS AF.
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Benefits
Lighter prints compared to native ABS
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Benefits
Higher mechanical resistances compared to native ABS
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Benefits
Increased resistance to friction and shocks
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Pitfalls and limitations
For an outdoor usage, we recommend that you paint your print or submit them to an anti UV treatment, such as our Nanovia smoothing solution.
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Pitfalls and limitations
Aramdid fibers and ABS are sensitive to UV radiation.
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Warping and shrinkage
Thanks to the aramid fibers Nanovia ABS AF allows for excellent 3D printing properties with limited warping and a great bed adhesion.
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Warping and shrinkage
Low warping when printing (even less than with carbon fiber composites)
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Surface finish
Can be smoothed with acetone
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Nozzle wear
A less abrasive fiber compared to carbon and glass
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1 - Odour and emissions
Whilst printing ABS produces a VOC derivative of styrene.
Nanovia, Nanovia ABS AF : Aramid fiber reinforced : Nanoviap. 1
3D4Makers ABSKevlarStrength XY, MPa35Modulus XY, GPa—Charpy notched, kJ/m²6.1HDT 0.45, °C88HDT 1.8, °C75Price, CAD/kg—Nozzle, °C250–270Bed, °C100Chamber, °C—Drying, °C, h—
3D4Makers ABSKevlar3D4Makers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, ABS Kevlar Filament7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 35 MPap. 1: Tensile Strength at Yield | no standard stated | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 30 MPap. 1: Tensile Strength at Break | no standard stated | not in the median: another value of this product is in it |
| Charpy impact strength orientation not stated | 14 kJ/m2p. 1: Charpy impact strength (unnotched) | no standard stated | not in the median: unnotched |
| Charpy impact strength orientation not stated | 6.1 kJ/m2p. 1: Charpy impact strength (notched) | no standard stated | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 88°Cp. 1: HDT 0.45 MN/m2, annealed | no standard namedAs the sheet prints it: 0.45 MN/m2annealed at a temperature its sheet does not state for a time its sheet does not stateannealed | in the median |
| Vicat softening temperature | 95°Cp. 1: VICAT Softening point | no standard stated | |
| Density | 1.037 g/cm³p. 1: Density (description text) | no standard stated | |
| 3D4Makers, Technical Data Sheet 3D Printing Filament ABS Kevlar Filament5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile break strength orientation not stated | 35 MPap. 1: Tensile Strength at Break | ISO 527As the sheet prints it: ISO 527-1* | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 14 kJ/m2p. 1: Charpyimpactstrength(unnotched) | ISO 179As the sheet prints it: ISO179-1eU | not in the median: unnotched |
| Charpy impact strength | 6.1 kJ/m2p. 1: Charpyimpactstrength(notched) | ISO 179As the sheet prints it: ISO179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 75 °Cp. 1: HDT1.81MN/m2,annealed | ISO 75As the sheet prints it: 1.81MN/m2 annealed ISO75annealed at a temperature its sheet does not state for a time its sheet does not stateannealed | in the median |
| Density | 1.05 g/cm³p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
- Annealing
- temperature not statedown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 250-270°C; Bed 100°C3D4Makers, Technical Data Sheet 3D Printing Filament ABS Kevlar Filamentp. 1: Recommended printing settings; p. 1: Bed Adhesion
- Nozzle 260°C (250-270 °C); Bed 100°C3D4Makers, ABS Kevlar Filamentp. 1: Print Temperature; p. 1: Bed Temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (6)
- Warping and shrinkage
No shrinkage / dimensional stability.
3D4Makers, ABS Kevlar Filamentp. 1 - Benefits
ABS KEVLAR has been designed for 3D printing by a precise formulation of aramid fibers into ABS materials.
3D4Makers, ABS Kevlar Filamentp. 1 - Warping and shrinkage
The aramid fibers assuring dimensional stability ,preventing the printed object to warp and even make the printed object lighter than regular ABS .
3D4Makers, ABS Kevlar Filamentp. 1 - Benefits
Light weight object.
3D4Makers, ABS Kevlar Filamentp. 1 - Surface finish
Smooth surface.
3D4Makers, ABS Kevlar Filamentp. 1 - Warping and shrinkage
Low Warping.
3D4Makers, ABS Kevlar Filamentp. 1
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.