PP-CF
5 products from 5 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
5 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- not published
How the numbers are worked out
Prusa Research Prusament PP Carbon Fiber by Prusa PolymersStrength XY, MPa27.3Modulus XY, GPa2.1Charpy notched, kJ/m²14.5HDT 0.45, °C158HDT 1.8, °C115Price, CAD/kg—Nozzle, °C260–280Bed, °C75–95Chamber, °C—Drying, °C, h702–4 h
Prusa Research Prusament PP Carbon Fiber by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PP Carbon Fiber by Prusa Polymers22 values | |||
| Tensile modulus XY | 2.1 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 2.5 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 27.3 ± 0.7 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength orientation not stated | 21 ± 0.4 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 30.7 ± 0.3 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 3.4 ± 0.1 %p. 2: Elongation at Yield Point (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 3.2 ± 0.1 %p. 2: Elongation at Yield Point (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 1.8 ± 0.1 GPap. 2: Flexural Modulus (Horizontal (source label)) | ISO 178 | in the median |
| Flexural modulus XZ | 3.4 ± 0.3 GPap. 2: Flexural Modulus (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 27.5 ± 0.7 MPap. 2: Flexural Strength (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 41.7 ± 1.5 MPap. 2: Flexural Strength (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 19 ± 1 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Charpy impact strength XY | 14.5 ± 0.3 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | in the median |
| Charpy impact strength XZ | 17.2 ± 1.7 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Charpy impact strength XZ | 10.5 ± 0.8 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: measured on a bar in another orientation |
| Hardness | 62 Shore Dp. 2: Hardness – Shore D | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 13 ± 1 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 158 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 115 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 0.91 g/cm3p. 2: Density [g/cm3] | ISO 1183 | |
| Water absorption | 0.03 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=30 % | |
| Water absorption | 0.04 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=7 days; humidity=30 % | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 75–95 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70 °C for 2–4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle [°C] 270 ± 10; Bed [°C] 85 ± 10Prusa Research, Technical datasheet Prusament PP Carbon Fiber by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type; p. 1: Additional Info
- Drying 70 °C for 2-4 hoursPrusa Research, Drying filament | Prusa Knowledge Basep. 1: drying
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Nozzle wear
A hardened nozzle is necessary.
Prusa Research, Technical datasheet Prusament PP Carbon Fiber by Prusa Polymersp. 1 - Printing advice
The brim is recommended to improve the adhesion of the edges and corners of the object.
Prusa Research, Technical datasheet Prusament PP Carbon Fiber by Prusa Polymersp. 1
3DXTECH CarbonX CF PPStrength XY, MPa78Modulus XY, GPa6.15Charpy notched, kJ/m²—HDT 0.45, °C124HDT 1.8, °C—Price, CAD/kg147Nozzle, °C240–270Bed, °C45–65Chamber, °CnoneDrying, °C, h654 h
3DXTECH CarbonX CF PP3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ PP+CF 3D Printing Filament7 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 265°C Bed Temp: 85°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 6150 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 78 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 1.5 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 6100 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 68 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 124 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Density | 1.1 g/ccp. 1: Density | ISO 1183 | |
| 3DXTECH, CarbonX CF PP safety data sheet1 value | |||
| Fibre content | 15-20 %p. 2: Carbon Fiber | no standard stated | |
Print settings
- Nozzle
- 240–270 °Cown data sheet
- Bed
- 45–65 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: CarbonX™ PP+CF 3D Printing FilamentRecommended printing settings
- Nozzle 240-270C; Bed 45-65C; Chamber Not Required; Drying 65C for 4 hours3DXTECH, CARBONX™ PP+CFPrint Recommendations
Price
147 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 147 CAD/kgCarbonX™ PP+CF - 1.75mm 750g (SKU CARBONX-PP-CF-750g)in its price; seen 30 Sep 2026
Its 5 documents
What the maker says (1)
- Moisture sensitivity
Low moisture absorption, typically does not require drying prior to use
3DXTECH, CARBONX™ PP+CFp. 1
Braskem FL900PP-CFStrength XY, MPa41Modulus XY, GPa6.38Charpy notched, kJ/m²—HDT 0.45, °C158HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C80Chamber, °C—Drying, °C, hnone
Braskem FL900PP-CFBraskem
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Braskem, FL900PP-CF8 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 6380 MPap. 1: Youngs Modulus D 638 MPa | ASTM D638As the sheet prints it: D 638print settingsprinting temperature 260°C, bed temperature 85°C, print speed 1800 mm/min, 100% of grid (90°) infill, 0 perimeter/shell layers, 0.60 mm hardened nozzle and 0.2 mm layer height | in the median |
| Tensile strength (yield or break not stated) XY | 41 MPap. 1: Ultimate Tensile Strength* | ASTM D638As the sheet prints it: D 638; print_temp=260 °C; bed_temp=85 °C; print_speed=1800 mm/min; infill=100% grid (90°); perimeters=0; nozzle=0.60 mm hardened; layer_height=0.2 mm | in the median |
| Elongation at break XY | 1.3 %p. 1: Tensile Elongation at Break D 638 % | ASTM D638As the sheet prints it: D 638print settingsprinting temperature 260°C, bed temperature 85°C, print speed 1800 mm/min, 100% of grid (90°) infill, 0 perimeter/shell layers, 0.60 mm hardened nozzle and 0.2 mm layer height | in the median |
| Flexural modulus XY | 4512 MPap. 1: Flexural Modulus – Chord Modulus D 790 MPa | ASTM D790As the sheet prints it: D 790print settingsprinting temperature 260°C, bed temperature 85°C, print speed 1800 mm/min, 100% of grid (90°) infill, 0 perimeter/shell layers, 0.60 mm hardened nozzle and 0.2 mm layer height | in the median |
| Charpy impact strength | 11.6 kJ/m2p. 1: Charpy Impact Strength at 23℃ ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23℃ ISO 179 | not in the median: notch not stated |
| HDT at 0.45 MPa | 158 ℃p. 1: Deflection Temperature (at 0.455 MPa) D 648 ℃ | ASTM D648As the sheet prints it: 0.455 MPa D 648 | in the median |
| Vicat softening temperature | 150 ℃p. 1: Vicat Softening Temperature (at 10 N) D 1525 ℃ | ASTM D1525As the sheet prints it: at 10 N D 1525 | |
| Density | 0.91 g/cm3p. 1: Density D 792 g/cm3 | ASTM D792As the sheet prints it: D 792 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not neededown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 240 - 260 ℃; Bed 80; Drying water resistance (no drying needed)Braskem, FL900PP-CFp. 1: Recommended printing settings: Nozzle Size (Material); p. 1: Recommended Bed Temperature / Substrate; p. 1: description (water resistance)
- Nozzle 240 - 260 ℃; Bed 20-40; Drying water resistance (no drying needed)Braskem, FL900PP-CFp. 1: Recommended printing settings: Nozzle Size (Material); p. 1: Alternate Bed Temperature / Substrate; p. 1: description (water resistance)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
FL900PP-CF is an engineering-grade composite made from 100% recycled carbon fiber (CF) and is designed to provide robust mechanical performance while maintaining a high degree of printability for complex structures.
Braskem, FL900PP-CFp. 1 - Moisture sensitivity
FL900PP-CF provides engineering level performance without compromising any of PP’s inherent properties which include light weight, water resistance (no drying needed), chemical resistance, and impact resistance.
Braskem, FL900PP-CFp. 1 - Nozzle wear
Nozzle Size (Material) mm ≥0.6 (Hardened Nozzle)
Braskem, FL900PP-CFp. 1 - Printing advice
Traditional bed adhesive solutions used for PLA and ABS (such as blue tape, glue sticks, hair spray) will not properly adhere PP to the built plate.
Braskem, FL900PP-CFp. 1
Nanovia PP CFStrength XY, MPa—Modulus XY, GPa5.38Charpy notched, kJ/m²3.5HDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C235–255Bed, °C80–100Chamber, °C20Drying, °C, h604 h
Nanovia PP CFNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanovia7 values | |||
| Tensile modulus orientation not stated | 5385 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strain at strength orientation not stated | 3.3 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | listed under other properties |
| Charpy impact strength | 3.5 kJ/m2p. 1: Charpy (notched) | ISO 179As the sheet prints it: ISO 179-1eA | in the median |
| Hardness | 61 Shore Dp. 1: Hardness | no standard stated | in the median |
| HDT at 0.45 MPa | 88 °Cp. 1: HDT B (0.45 MPa) | ISO 75As the sheet prints it: 0.45 MPa ISO 75-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.00 g/cm3p. 1: Density | ISO 1183 | |
| Water absorption | < 1 %p. 1: Water absorption | no standard statedprint settingsafter 24h of submersion | |
| Nanovia, PP CF official material safety data sheet1 value | |||
| Glass transition temperature | -10 °Cp. 2: Tg | no standard stated | in the median |
Print settings
- Nozzle
- 235–255 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 235 – 255 °C; Bed 80 – 100 °C; Chamber 20 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal); p. 1: Printing
Price
Not in the price sample.
Its 4 documents
What the maker says (10)
- Good for
Thanks to polypropylene’s close to zero water absorption rate, high chemical resistance, low density, and a native UV, Nanovia PP CF is ideal for light components exposed to the elements which require a high dimensional stability such as nautical equipment and mechanical automotive parts.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Good for
Polypropylene is a semi-rigid material, with high wear and shock resistance, notably used for hinges and components that endure regular flexing.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Good for
Humidity proof, it’s perfectly suited for both outdoor and high stress industral applications.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Benefits
The carbon fiber composition of Nanovia PP CF limit this phenomenon allowing it to be used for parts that require dimensional control in hot and humid environments.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Pitfalls and limitations
Much like polyamide (nylon), polypropylene gradually becomes more flexible with higher temperatures.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Nozzle wear
A reinforced nozzle, suitable for abrasive materials is recommended.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Printing advice
In the case of bed adhesion issues, it’s recommended to either use a “raft” or a polypropylene bed.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Printing advice
The latter can be achieved by applying polypropylene film/tape to the printer bed.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Printing advice
In order for the film/tape to not unstick, a lower bed temperature is recommended.
Nanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Pitfalls and limitations
The product is not approved for medical applications.
Nanovia, PP CF official material safety data sheetp. 2: Section7.2 safe storage/use exclusion
Chemicals and environment (4)
- UV and outdoor: described in words
The added carbon fibers makes Nanovia PP more rigid and UV resistant.
UVNanovia, Nanovia PP CF : Carbon fiber reinforced : Nanoviap. 1 - Application notes: described in words
Nanovia PP CF V-Slot real connectors after limonene submesion
Nanovia, Nanovia HIPS as a soluble support material for 3D printingp. 1: PP-CF connector figure caption - Organic solvent resistance: described in words
Some Organic solvents could degrade the material.
Nanovia, PP CF official material safety data sheetp. 2: Section10.3 possible side reactions - UV and outdoor: described in words
Biodegradation and elimination (H2O): the product is inert and can lead some surface degradation under the UV action.
UVNanovia, PP CF official material safety data sheetp. 3: Section12.2 persistence/degradability, own English column
LEHVOSS LUVOCOM 3F PP CF 9928 BKStrength XY, MPa92Modulus XY, GPa9.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–250Bed, °C≥ 50Chamber, °CnoneDrying, °C, h804–6 h
LEHVOSS LUVOCOM 3F PP CF 9928 BKLEHVOSS
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BK12 valuesThe same values also in LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BK.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus orientation not stated | 7 GPap. 1: Modulus of elasticity dry, @1 mm/min ISO 527 MPTS ISO 3167 A GPa | ISO 527, ISO 3167As the sheet prints it: 1 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) orientation not stated | 54 MPap. 1: Tensile strength dry, @50 mm/min ISO 527 MPTS ISO 3167 A MPa | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strain at strength orientation not stated | 1,2 %p. 1: Elongation at maximum force dry, @50 mm/min ISO 527 MPTS ISO 3167 A % | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | listed under other properties |
| Flexural modulus orientation not stated | 6 GPap. 1: Flexural modulus dry, @2 mm/min ISO 178 MPTS ISO 3167 A GPa | ISO 178, ISO 3167As the sheet prints it: 2 mm/min MPTS A ISO 178 ISO 3167 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 78 MPap. 1: Flexural strength dry, @10 mm/min ISO 178 MPTS ISO 3167 A MPa | ISO 178, ISO 3167As the sheet prints it: 10 mm/min MPTS A ISO 178 ISO 3167 | not in the median: measured on a moulded bar |
| Charpy impact strength | 35 kJ/m²p. 1: Charpy impact strength dry ISO 179 1eU 80x10x4mm kJ/m² | specimen not stated; its document points to a moulded or resin bar, ISO 179As the sheet prints it: 1eU 80x10x4mm ISO 179 | not in the median: unnotched |
| Vicat softening temperature | 80 °Cp. 1: Vicat softening temp VST A DIN ISO 306 MPTS ISO 3167 A °C | ISO 306, ISO 3167 | |
| Melting temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Melt temperature °C | specimen not stated, no standard stated | |
| Continuous service temperature | 100 °Cp. 1: Continuous service temperature 20.000 h IEC 60216 MPTS ISO 3167 A °C | IEC 60216, ISO 3167As the sheet prints it: 20.000 h MPTS A IEC 60216 ISO 3167 | |
| Density | 1,00 g/cm³p. 1: Specific gravity ISO 1183-3 g/cm³ | specimen not stated, ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0,3 %p. 1: Water absorption 23°C / 24h ISO 62 MPTS ISO 3167 A %also in LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BK | ISO 62, ISO 3167As the sheet prints it: 23°C / 24h MPTS A ISO 62 ISO 3167 | |
| Surface resistivity | 10⁷ Ωp. 1: Surface resistance ROB DIN IEC 60093 Ronde 60x4mm Ω | specimen not stated, IEC 60093As the sheet prints it: 60x4mm IEC 60093 | |
| LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BK7 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bardry | |||
| Tensile modulus orientation not stated | 9,5 GPap. 1: Tensile modulus | ISO 527, ISO 3167As the sheet prints it: ISO 527; rate=1 mm/min; specimen=ISO 3167 A | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 92 MPap. 1: Tensile strength | ISO 527, ISO 3167As the sheet prints it: ISO 527; rate=50 mm/min; specimen=ISO 3167 A | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strain at strength orientation not stated | 2,5 %p. 1: Elongation @Fmax. | specimen not stated, ISO 527, ISO 3167As the sheet prints it: ISO 527; rate=50 mm/min; endpoint=Fmax; specimen=ISO 3167 A | listed under other properties |
| Flexural modulus orientation not stated | 7 GPap. 1: Flexural modulus | ISO 178, ISO 3167As the sheet prints it: ISO 178; rate=2 mm/min; specimen=ISO 3167 A | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 90 MPap. 1: Flexural strength | ISO 178, ISO 3167As the sheet prints it: ISO 178; rate=10 mm/min; specimen=ISO 3167 A | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 42 kJ/m²p. 1: Impact strength | ISO 179As the sheet prints it: ISO 179 1eU; specimen size=80x10x4mm | not in the median: unnotched |
| Mould shrinkage orientation not stated | 0,2-0,6 %p. 1: Linear mould shrinkage | specimen not stated, ISO 3167As the sheet prints it: DIN 16742; specimen=ISO 3167 A | |
| LEHVOSS, LUVOCOM-3F | LEHVOSS Compounds1 value | |||
| Fibre content | 20 %p. 1: carbon fibers | no standard stated | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- at least 50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 80 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, LUVOCOM 3F PP CF 9928; bed in FormFutura, LUVOCOM 3F PP CF 9928.
Its 3 print profiles, in the documents' words
- No temperature statedLEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BKp. 2: Recommended printing settings
- Nozzle ± 220 – 230° C; Bed ± 65 – 75° C; Drying 4-6h @80°C (max)FormFutura, LUVOCOM 3F PP CF 9928p. 1: General printing guidelines; Abrasiveness
- Nozzle 220 - 250 °C; Bed > 50 °CLEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BKp. 1: Recommended processing parameters (3D Printing parameters)
Price
Not in the price sample.
Its 5 documents
What the maker says (5)
- Benefits
Electrically conductive, suitable for continuous discharging of statically-generated electricity.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BKp. 1 - Benefits
Strong, stiff parts.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BKp. 1 - Warping and shrinkage
Low warpage.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BKp. 1 - Benefits
Usually the material can be processed over a broad temperature range and can thus be adapted to a wide variety of processing conditions.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BKp. 2 - Moisture sensitivity
Moisture may lead to smearing and in extreme cases to foaming.
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PP CF 9928 BKp. 2
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.