PPS-GF
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- shared data sheet
- hardened nozzle
- not published
How the numbers are worked out
Polymaker Fiberon PPS-GF20Strength XY, MPa64.1Strength Z, MPa22.9Modulus XY, GPa4.55Charpy notched, kJ/m²7.3HDT 0.45, °C236HDT 1.8, °C126Price, CAD/kg164Nozzle, °C310–350Bed, °C80–90Chamber, °CnoneDrying, °C, h10010 h
Polymaker Fiberon PPS-GF20Polymaker
Data sheet shared with QIDI PPS-GF20: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, Fiberon™ PPS-GF20 Technical Data Sheet25 valuesUnless a row says otherwise: printed specimenprint settingsPrinting temperature 330-350 °C Infill 100% Bed temperature 90 °C Shell 2 Top & bottom layer 3 Cooling fan OFF FLEXURAL TESTING SPECIMEN TENSILE TESTING SPECIMEN IMPACT TESTING SPECIMEN ASTM D638 (ISO 527, GB/T 1040) ASTM D638 (ISO 527, GB/T 1040) ASTM D638 (ISO 179, GB/T 1043) 150.00 80.00 80. 00 114.00 60. 00 80.00 45 | |||
| Tensile modulus XY | 4552.0 ± 54.6 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Tensile modulus Z | 2557.2 ± 101.2 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Tensile strength (yield or break not stated) XY | 64.1 ± 2.1 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Tensile strength (yield or break not stated) Z | 22.9 ± 0.8 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Elongation at break XY | 2.0 ± 0.2 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Elongation at break Z | 1.1 ± 0.1 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Flexural modulus XY | 4110.7 ± 124.9 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Flexural modulus Z | 2605.7 ± 101.8 MPap. 1: Bending modulus (Z) | ISO 178, GB/T 9341dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Flexural strength XY | 102.3 ± 3.7 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Flexural strength Z | 45.7 ± 1.1 MPap. 1: Bending strength (Z) | ISO 178, GB/T 9341dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Charpy impact strength XY | 7.3 ± 0.2 kJ/m2p. 1: Charpy impact strength (X-Y) notched | no standard stateddryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | in the median |
| Charpy impact strength XY | 27.3 ± 1.1 kJ/m2p. 1: Charpy impact strength (X-Y)un-notched | ISO 179, GB/T 1043dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | not in the median: unnotched |
| Charpy impact strength Z | 4.3 ± 0.3 kJ/m2p. 1: Charpy impact strength (Z) un-notched | ISO 179, GB/T 1043dryDryannealed at 130 °C for 10 hAll specimens were annealed at 130 °C for 10 h | not in the median: unnotched |
| HDT at 0.45 MPa | 236.3 °Cp. 1: Heat deflection temp. 0.45MPa | ISO 75As the sheet prints it: ISO 75 0.45MPaannealed at 130 °C for a time its sheet does not stateHDT specimens annealed at 130 °C | in the median |
| HDT at 0.45 MPa | 248.9 °Cp. 1: HDT note, specimens annealed at 230 °C (0.45MPa) | ISO 75As the sheet prints it: ISO 75 0.45MPaannealed at 230 °C for a time its sheet does not stateHDT specimens annealed at 230 °C (deeper coloration) | not in the median: another value of this product is in it |
| HDT at 1.8 MPa | 125.8 °Cp. 1: Heat deflection temp. | ISO 75As the sheet prints it: ISO 75 1.8MPaannealed at 130 °C for a time its sheet does not stateHDT specimens annealed at 130 °C | in the median |
| HDT at 1.8 MPa | 219.6 °Cp. 1: HDT note, specimens annealed at 230 °C (1.8MPa) | ISO 75As the sheet prints it: ISO 75 1.8MPaannealed at 230 °C for a time its sheet does not stateHDT specimens annealed at 230 °C (deeper coloration) | not in the median: another value of this product is in it |
| Glass transition temperature | 95.0 °Cp. 1: Glass transition temp. | DSCAs the sheet prints it: DSC, 10°C/min | in the median |
| Vicat softening temperature | 272.5 °Cp. 1: Vicat softening temp. | ISO 306, GB/T 1633annealed at 130 °C for 10 hAll specimens were annealed at 130°C for 10h | |
| Melting temperature | 279.6 °Cp. 1: Melting temperature | DSCAs the sheet prints it: DSC, 10°C/min | |
| Crystallization temperature | 225.8 °Cp. 1: Crystallization temp. | DSCAs the sheet prints it: DSC, 10°C/min | |
| Density | 1.36 g/cm3p. 1: Density | specimen not stated, ISO 1183, GB/T 1033 | |
| Water absorption | 0.11 %p. 1: Equilibrium water absorption | no standard namedAs the sheet prints it: Equilibrium water absorption, 70% RH, 23 °C (moisture absorption curve) | |
| Melt mass-flow rate | 27 g/10min g/10 minp. 1: Melt index | no standard namedAs the sheet prints it: 300 °C, 5 kg | |
| Fibre content | 20% glass fiber-reinforcedp. 1: Fibre content | specimen not stated, no standard statedprint settings not stated | |
Print settings
- Nozzle
- 310–350 °Cown data sheet
- Bed
- 80–90 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 100 °C for 10 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 130 °C; 130 °C for 10 h; 230 °Cown data sheet
Its print profile, in the documents' words
- Nozzle 310-350 °C; Bed 80-90 °C; Chamber Room temp.; Drying 100 °C/10HPolymaker, Fiberon™ PPS-GF20 Technical Data SheetRecommended printing settings
Price
164 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 164 CAD/kgPolymaker Fiberon PPS-GF20 1.75mm 500g (SKU PMK-FBR-PPS-G20-500)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (4)
- Warping and shrinkage
Fiberon™ PPS-GF20 is a 20% glass fiber-reinforced polyphenylene sulfide engineered to deliver enhanced mechanical strength and dimensional stability.
Polymaker, Fiberon™ PPS-GF20 Technical Data Sheetp. 1 - Moisture sensitivity
Fiberon™ PPS-GF20 should always be stored and used under dry conditions (relative humidity below 20%).
Polymaker, Fiberon™ PPS-GF20 Technical Data Sheetp. 1 - Nozzle wear
Abrasion of the brass nozzle happens frequently when printing Fiberon™ PPS-GF20.
Polymaker, Fiberon™ PPS-GF20 Technical Data Sheetp. 1 - Nozzle wear
A wear-resistance nozzle, such as hardened steel and ruby nozzle, is highly recommended to be used with Fiberon™ PPS-GF20.
Polymaker, Fiberon™ PPS-GF20 Technical Data Sheetp. 1
Chemicals and environment (1)
- Post-processing: described in words
Annealing temp. and time 130 °C/10H
Polymaker, Fiberon™ PPS-GF20 Technical Data Sheetp. 1: Annealing temp. and time
QIDI PPS-GF20Strength XY, MPa64.1Strength Z, MPa22.9Modulus XY, GPa4.55Charpy notched, kJ/m²7.3HDT 0.45, °C236HDT 1.8, °C126Price, CAD/kg111Nozzle, °C300–350Bed, °C80–100Chamber, °CnoneDrying, °C, h1008–10 h
QIDI PPS-GF20QIDI
Data sheet shared with Polymaker Fiberon PPS-GF20: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 300–350 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not requiredPolymaker Fiberon PPS-GF20's data sheet, shared
- Drying
- 100 °C for 8–10 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 130 °C; 130 °C for 10 h; 230 °CPolymaker Fiberon PPS-GF20's data sheet, shared
Its print profile, in the documents' words
- Nozzle 300-350 °C; Bed 80-100 °C; Drying 100 °C,8-10 hQIDI, QIDI PPS-GF20 3D printer filament (QIDI store)p. 1: Drying Settings (Blast Drying Oven); p. 1: Bed Temperature; p. 1: Cautions for Use; p. 1: Cautions for Use; p. 1: Build Plate; Recommended Printing Settings (Nozzle Temperature); its Printing Tips add "The hot end operating temperature must be set between 310°C and 350°C"
Price
111 CAD/kgits one regular price in the sample
1 listing
- QIDI Canada: 111 CAD/kgPPS-GF20 / 750g / Gray HEX Code #75787b (SKU 046GRY-1-750)in its price; seen 20 Oct 2026
Its 2 documents
IPCON PPS-GFStrength XY, MPa72Strength Z, MPa42Modulus XY, GPa5.76Charpy notched, kJ/m²—HDT 0.45, °C241HDT 1.8, °C—Price, CAD/kg—Nozzle, °C320–360Bed, °C100–120Chamber, °C60–120Drying, °C, h100–1406–8 h
IPCON PPS-GFIPCON
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
IPCON, PPS-GF19 valuesUnless a row says otherwise:print settingsPrinting Temperature and Humidity ≤ 120 ℃, ≤ 20% RH (Sealed with desiccant) Storage Temperature and Humidity ≤ 35 ℃, ≤ 20% RH (Sealed with desiccant) Compatible Support Material Itself or support filament for PPS Compatible Printer Type Enclosed-frame (60 to 120 °C chamber temperature is recommended) AMS or CFS Compatib | |||
| Tensile modulus XY | 5764 MPap. 1: Young's Modulus XY | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2581 MPap. 1: Young's Modulus Z | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 72 MPap. 1: Tensile Strength XY | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 42 MPap. 1: Tensile Strength Z | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 1.6 %p. 1: Breaking Elongation Rate XY | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 0.7 %p. 1: Breaking Elongation Rate Z | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 4530 MPap. 1: Flexural Modulus XY | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2212 MPap. 1: Flexural Modulus Z | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 112 MPap. 1: Flexural Strength XY | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 58 MPap. 1: Flexural Strength Z | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 31.7 kJ/m²p. 1: Impact Strength XY | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 10.6 kJ/m²p. 1: Impact Strength Z | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Hardness orientation not stated | Shore hardness 83D Shore Dp. 1: Surface Hardness | no standard namedAs the sheet prints it: Shore hardness | in the median |
| HDT at 0.45 MPa | 241 °Cp. 1: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75, 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 258 °Cp. 1: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 278 °Cp. 1: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.36 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0.05 %p. 1: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: tion Rate 25 °C, 55% RH, room air | |
| Melt mass-flow rate | 22.3 g/10 minp. 1: Melt Index | no standard namedAs the sheet prints it: 340 °C, 2.16 kg | |
Print settings
- Nozzle
- 320–360 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- 60–120 °Cown data sheet
- Drying
- 100–140 °C for 6–8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 320 -360 °C; Bed 100 -120 °C; Chamber 60 - 120 °C; Drying 100 - 140 °C, 6 - 8 h (Blast drying oven)IPCON, PPS-GFRecommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Warping and shrinkage
Shrinkage Rate* Specially-defined 0.21% - 0.42%
IPCON, PPS-GFp. 1 - Good for
Suitable for automotive engines and fluid systems, aerospace, chemical industry, medical disinfection equipment and electrical equipment and other application scenarios that require flame retardancy, insulation, heat resistance or water and solvent resistance.
IPCON, PPS-GFp. 2 - Nozzle wear
Compatible Nozzle Material Hardened steel, diamond, tungsten carbide, etc
IPCON, PPS-GFp. 2 - Supports and removal
Compatible Support Material Itself or support filament for PPS
IPCON, PPS-GFp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.