PPA-GF
5 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
5 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- hardened nozzle
- not published
How the numbers are worked out
Siraya Tech Fibreheart PPA-GFStrength XY, MPa89Strength Z, MPa63Modulus XY, GPa5.7Izod notched, kJ/m²—HDT 0.45, °C84HDT 1.8, °C80Price, CAD/kg106Nozzle, °C300–320Bed, °C80–110Chamber, °C60–80Drying, °C, h80–1004–6 h
Siraya Tech Fibreheart PPA-GFSiraya Tech
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Siraya Tech, Fibreheart PPA-GF TDS for FDM printer28 values | |||
| Tensile modulus XY | 5700 MPap. 3: Mechanical Properties, Young’s Modulus (X-Y), Unannealed | ASTM D638as printedUnannealed | in the median |
| Tensile modulus XY | 6000 MPap. 3: Mechanical Properties, Young’s Modulus (X-Y), Annealed | ASTM D638annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| Tensile modulus Z | 4200 MPap. 3: Mechanical Properties, Young’s Modulus (Z), Unannealed | ASTM D638as printedUnannealed | in the median |
| Tensile break strength XY | 89 MPap. 3: Mechanical Properties, Tensile Stress at Break (X-Y), Unannealed | ASTM D638as printedUnannealed | in the median |
| Tensile break strength XY | 94 MPap. 3: Mechanical Properties, Tensile Stress at Break (X-Y), Annealed | ASTM D638annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| Tensile break strength Z | 63 MPap. 3: Mechanical Properties, Tensile Stress at Break (Z), Unannealed | ASTM D638as printedUnannealed | in the median |
| Elongation at break XY | 2.7 %p. 3: Mechanical Properties, Elongation at Break (X-Y), Unannealed | ASTM D638as printedUnannealed | in the median |
| Elongation at break XY | 2.2 %p. 3: Mechanical Properties, Elongation at Break (X-Y), Annealed | ASTM D638annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| Elongation at break Z | 1.85 %p. 3: Mechanical Properties, Elongation at Break (Z), Unannealed | ASTM D638as printedUnannealed | in the median |
| Flexural modulus orientation not stated | 4200 MPap. 3: Mechanical Properties, Bending Modulus, Unannealed | ISO 178as printedUnannealed | in the median |
| Flexural modulus orientation not stated | 5000 MPap. 3: Mechanical Properties, Bending Modulus, Annealed | ISO 178annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| Flexural strength orientation not stated | 141 MPap. 3: Mechanical Properties, Bending Strength, Unannealed | ISO 178as printedUnannealed | in the median |
| Flexural strength orientation not stated | 148 MPap. 3: Mechanical Properties, Bending Strength, Annealed | ISO 178annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength orientation not stated | 12.2 kJ/m²p. 3: Mechanical Properties, Charpy impact strength, Unannealed | ISO 179as printedUnannealed | not in the median: notch not stated |
| Charpy impact strength orientation not stated | 7.1 kJ/m²p. 3: Mechanical Properties, Charpy impact strength, Annealed | ISO 179annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| HDT at 0.45 MPa | 84 °Cp. 3: Other Properties, HDT Method B, Unannealed | no standard namedAs the sheet prints it: Method B, 0.45 MPaas printedUnannealed | in the median |
| HDT at 0.45 MPa | 185 °Cp. 3: Other Properties, HDT Method B, Annealed | no standard namedAs the sheet prints it: Method B, 0.45 MPaannealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| HDT at 1.8 MPa | 80 °Cp. 3: Other Properties, HDT Method A, Unannealed | no standard namedAs the sheet prints it: Method A, 1.80 MPaas printedUnannealed | in the median |
| HDT at 1.8 MPa | 112.2 °Cp. 3: Other Properties, HDT Method A, Annealed | no standard namedAs the sheet prints it: Method A, 1.80 MPaannealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| Glass transition temperature | 80 °Cp. 3: Other Properties, Glass Transition Temperature, Unannealed | ASTM D3418as printedUnannealed | in the median |
| Glass transition temperature | 80 °Cp. 3: Other Properties, Glass Transition Temperature, Annealed | ASTM D3418annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | not in the median: annealed; the as-printed value is in it |
| Vicat softening temperature | 235 °Cp. 3: Other Properties, Vicat softening temperature, Unannealed | ISO 306as printedUnannealed | |
| Vicat softening temperature | 235 °Cp. 3: Other Properties, Vicat softening temperature, Annealed | ISO 306annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | |
| Melting temperature | 232 °Cp. 3: Other Properties, Melting Point, Unannealed | ASTM D3418as printedUnannealed | |
| Melting temperature | 232 °Cp. 3: Other Properties, Melting Point, Annealed | ASTM D3418annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (schedule not stated) | |
| Density | 1.27 g/cm³p. 2: Specifications, Filament Density | no standard stated | |
| Water absorption | 1.37 %p. 3: Other Properties, Water Absorption, Unannealed | ISO 62As the sheet prints it: ISO 62 Method 1as printedUnannealed | |
| Fibre content | 15%)p. 1: Fibre content | no standard stated | |
| Siraya Tech, Material Safety Data Sheet: Siraya Tech PPA-GF1 value | |||
| Fibre content | 15-20 %p. 2: Fibre content | no standard stated | |
Print settings
- Nozzle
- 300–320 °Cown data sheet
- Bed
- 80–110 °Cown data sheet
- Heated chamber
- 60–80 °Cown data sheet
- Drying
- 80–100 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- temperature not statedown data sheet
Its print profile, in the documents' words
- Nozzle 300-320 °C; Bed 80 - 110°C; Chamber 60 - 80°C; Drying Always dry the filament at 80-100°C for 4-6 hours before every print job.Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 4: Build Plate Temp, Chamber Temp, Drying, Enclosure, Nozzle Temp; p. 4: Nozzle
Price
106 CAD/kgits one regular price in the sample
1 listing
- Amazon.ca: 106 CAD/kgSiraya Tech Fibreheart PPA-GF 3D Printer Filament, High-Strength, Black 1kg (SKU B0FL7HN6WJ)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (13)
- Good for
Ideal for: Automotive, Industrial, Aerospace & UAV, Electronics, End-Use Components.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 1 - Benefits
It is designed to deliver a superior combination of mechanical strength, high-temperature performance, chemical resistance, and exceptional dimensional stability.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 1 - Warping and shrinkage
A passively heated or actively heated enclosed build chamber is recommended to maintain a stable ambient temperature, which prevents warping and improves layer adhesion.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 4 - Moisture sensitivity
Print directly from a heated filament dryer or a dry box with active desiccant (<15% RH) to maintain a dry state throughout the printing process.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 4 - Nozzle wear
A ≥ 0.4mm hardened steel or other wear-resistant nozzle (e.g., ruby, tungsten carbide) is mandatory
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 4 - Printing advice
An all-metal hotend capable of reaching and maintaining 320°C is required.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 4 - Printing advice
A direct drive extruder is the most recommended for precise control over filament flow and retraction.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 4 - Printing advice
Build Plate Adhesion Brim (10-20 lines) or Raft
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 4 - Benefits
Annealing can significantly increase the heat resistance (HDT), stiffness, and strength of your PPA-GF parts.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 5 - Supports and removal
It's often easier to remove support structures while the part is still warm.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 5 - Printing advice
Place the part on a flat, oven-safe surface (like a metal or glass sheet) to prevent distortion.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 5 - Printing advice
For complex parts, consider placing them in a bed of sand to support all features.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 5 - Printing advice
Turn the oven off and allow the part to cool down slowly to room temperature inside the oven.
Siraya Tech, Fibreheart PPA-GF TDS for FDM printerp. 5
Chemicals and environment (3)
- Safety: described in words
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke at the workplace. Avoid dust formation by cutting or grinding. During printing, ensure good ventilation and local exhaust.
Processing ventilationSiraya Tech, Material Safety Data Sheet: Siraya Tech PPA-GFp. 3: section 7.1, Precautions for safe handling - Moisture sensitivity: described in words
To ensure technical integrity of the product store in the original container/box and keep at temperatures below 50ºC and in a dry place. Protect from moisture, product may be hygroscopic.
Moisture handlingSiraya Tech, Material Safety Data Sheet: Siraya Tech PPA-GFp. 3: section 7.2, Conditions for safe storage - Disposal and circularity: described in words
Dispose of in accordance with local regulations.
Siraya Tech, Material Safety Data Sheet: Siraya Tech PPA-GFp. 4: section 13.1, Waste treatment methods
IPCON PPA-GFStrength XY, MPa106Strength Z, MPa52Modulus XY, GPa6.56Izod notched, kJ/m²—HDT 0.45, °C227HDT 1.8, °C—Price, CAD/kg—Nozzle, °C280–310Bed, °C100–120Chamber, °CnoneDrying, °C, h100–1406–8 h
IPCON PPA-GFIPCON
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
IPCON, PPA-GF18 valuesUnless a row says otherwise: printed specimenprint settingsPrinting Temperature and Humidity ≤ 120 ℃, ≤ 20% RH (Sealed with desiccant) Storage Temperature and Humidity ≤ 35 ℃, ≤ 20% RH (Sealed with desiccant) Compatible Support Material Itself or support filament for PA Compatible Printer Type Enclosed-frame (recommended), open-frame, AMS or CFS Not Compatible Compatible Nozzle | |||
| Tensile modulus XY | 6558 MPap. 1: Young's Modulus XY | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 3472 MPap. 1: Young's Modulus Z | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 106 MPap. 1: Tensile Strength XY | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 52 MPap. 1: Tensile Strength Z | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 2.1 %p. 1: Breaking Elongation Rate XY | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 1.0 %p. 1: Breaking Elongation Rate Z | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 5920 MPap. 1: Flexural Modulus XY | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 3246 MPap. 1: Flexural Modulus Z | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 159 MPap. 1: Flexural Strength XY | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 75 MPap. 1: Flexural Strength Z | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 30.2 kJ/m²p. 1: Impact Strength XY | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 4.8 kJ/m²p. 1: Impact Strength Z | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 227 °Cp. 1: Heat Deflection Temperature | specimen not stated, ISO 75As the sheet prints it: ISO 75, 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 231 °Cp. 1: Vicar Softening Temperature | specimen not stated, ISO 306, GB/T 1633 | |
| Melting temperature | 256 °Cp. 1: Melting Temperature | specimen not stated, DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.28 g/cm³p. 1: Density | specimen not stated, ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 1.29 %p. 1: Saturated Water Absorption Rate | specimen not stated, no standard namedAs the sheet prints it: tion Rate 25 °C, 55% RH, room air | |
| Melt mass-flow rate | 13.2 g/10 minp. 1: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 290 °C, 2.16 kg | |
Print settings
- Nozzle
- 280–310 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 100–140 °C for 6–8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 280 - 310 °C; Bed 100 - 120 °C; Drying 100 - 140 °C, 6 -8 hIPCON, PPA-GFRecommended printing settings; p. 2: Compatible Printer Type
- Nozzle 280 – 310°C; Bed 100 – 120°C; Drying 100 – 140 °C / 10 – 14 hIPCON, IPCON PPA GF – Glass Fiber Reinforced PPA Filamentp. 1: Exact-product chamber guidance: Printer Type Enclosed-frame (rec.), open-frame
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Good for
Can be used to print bicycle accessories, as well as heat and humidity-resistant, and insulating parts for automobiles, electronics and mechanical equipment.
IPCON, PPA-GFp. 2 - Benefits
Extreme temperature and humidity resistance (short-term peak of temperature resistance reaches 220 °C)
IPCON, PPA-GFp. 2 - Warping and shrinkage
ultra-low shrinkage and warping
IPCON, PPA-GFp. 2 - Nozzle wear
Hardened steel, diamond, tungsten carbide, etc
IPCON, PPA-GFp. 2
Chemicals and environment (2)
- Application notes: described in words
Insulating parts for machinery, electronics and automotive temperature exposure.
IPCON, PPA-GFApplication - Creep evidence: described in words
Creep resistance is qualitative; no creep curve or specified long-term allowable supplied.
IPCON, PPA-GFCreep
Flashforge PPA-GFStrength XY, MPa100Strength Z, MPa—Modulus XY, GPa7Izod notched, kJ/m²9HDT 0.45, °C220HDT 1.8, °C—Price, CAD/kg—Nozzle, °C255–275Bed, °C80–100Chamber, °C25–80Drying, °C, h120≥ 8 h
Flashforge PPA-GFFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PPA-GF Filament16 values | |||
| Tensile modulus XY | 7000-7800 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 100-115 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | in the median |
| Elongation at break XY | 3.5-5 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | in the median |
| Flexural modulus XY | 4710-5010 Mpap. 1: Bending Modulus (X-Y) ISO178 Mpa | ISO 178print settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | in the median |
| Flexural modulus Z | 2600-2700 Mpap. 1: Bending Modulus (Z) ISO178 Mpa | ISO 178print settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | in the median |
| Flexural strength XY | 195-215 Mpap. 1: Bending Strength (X-Y) ISO178 Mpa | ISO 178print settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | in the median |
| Flexural strength Z | 68.5-71 Mpap. 1: Bending Strength (Z) ISO178 Mpa | ISO 178print settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | in the median |
| Izod impact strength XY | 9-11 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO180 KJ/m2 | ISO 180notchedprint settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | not in the median: the only value of its test, shown as published |
| Izod impact strength Z | 2.5-3 KJ/m2p. 2: Izod Impact Strength (Z) ISO180 KJ/m2 | ISO 180notchedprint settingsTest Equipment Guider 3 Ultra (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 200mm/s; Wall Thickness 0.4mm; Infill 100% | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 220 ℃p. 2: HDT@ 0.455 MPa (66 psi) ISO75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO75 | in the median |
| Continuous service temperature | 120 ℃p. 2: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.31-1.33 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 0.1 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 35-40 g/10minp. 1: Melt Flow Rate (MFR) (280℃/5Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 280℃/5Kg ISO 1133 | |
| Surface resistivity | 10^12 Ωtranscription correctedp. 2: Surface Resistance IEC 60093 Ω | IEC 60093 | |
| Fibre content | 30% glass fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 255–275 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- 25–80 °Cown data sheet
- Drying
- optional: 120 °C for ≥ 8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 255~275℃ (270℃ recommended); Bed 80~100℃ (90℃ recommended); Chamber Room temperature~80℃; Drying In case the filament has become wet, it should be dried before being used; Using a hot dry air oven at 120℃ for at least 8 hours is recommendedFlashforge, Technical Data Sheet PPA-GF Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (7)
- Benefits
High rigidity/High strength/High-temperature resistance/Low creep
Flashforge, Technical Data Sheet PPA-GF Filamentp. 1 - Benefits
It is a modified polyphthalamide (PPA) containing 30% glass fiber, offering high-temperature resistance, high rigidity, and low shrinkage, with the ability to be printable on non-heated chamber FFF 3D printers.
Flashforge, Technical Data Sheet PPA-GF Filamentp. 1 - Benefits
Models printed with PPA-GF exhibit excellent tensile and impact strength, with a heat deflection temperature of up to 220°C. It also provides outstanding creep resistance at high temperatures, minimizing the impact of humidity and temperature on dimensional stability and electrical properties.
Flashforge, Technical Data Sheet PPA-GF Filamentp. 1 - Nozzle wear
Nozzle & Gear Material Hardened steel
Flashforge, Technical Data Sheet PPA-GF Filamentp. 2 - Supports and removal
Otherwise, the support structure can be bonded to the model, which will make the support hard to remove.
Flashforge, Technical Data Sheet PPA-GF Filamentp. 3 - Supports and removal
If PPA-GF is used as the support material for itself, please remove the support structure as soon as the model cools down.
Flashforge, Technical Data Sheet PPA-GF Filamentp. 3 - Printing advice
After the printing process, it is recommended to dry the model in the oven at 80-100°C for 1-3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet PPA-GF Filamentp. 3
Chemicals and environment (1)
- Post-processing: described in words
After the printing process, it is recommended to dry the model in the oven at 80-100°C for 1-3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet PPA-GF Filamentp. 3: Post-processing note
Raise3D Hyper Core PPA GF25Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Izod notched, kJ/m²—HDT 0.45, °C196HDT 1.8, °C118Price, CAD/kg—Nozzle, °C300–330Bed, °C70–80Chamber, °C—Drying, °C, h80–100≥ 8 h
Raise3D Hyper Core PPA GF25Raise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheet21 valuesUnless a row says otherwise: printed specimenafter moisture conditioningConditionedprint settingsNozzle temp. = 340 ºC; Bed temp.= 80 ºC; Print speed= 45 mm/s; Infill= 100%; Infill angle= ±45 ° | |||
| Tensile modulus XY | 5730 ± 302 MPap. 1: Young’s modulus (MPa) | ISO 527annealed at 100 °C for 8 hannealed at 100 ºC for 8h | not in the median: measured after moisture conditioning |
| Tensile modulus XY | 5401 ± 227 MPap. 2: Young’s modulus (MPa) (XY) | ISO 527as printedbefore annealed | not in the median: measured after moisture conditioning |
| Tensile modulus Z (ZX) | 4151 ± 80 MPap. 2: Young’s modulus (MPa) (ZX) | ISO 527as printedbefore annealed | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 105 ± 2 MPap. 1: Tensile strength (MPa) | ISO 527annealed at 100 °C for 8 hannealed at 100 ºC for 8h | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 97 ± 2 MPap. 2: Tensile strength (MPa) (XY) | ISO 527as printedbefore annealed | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) Z (ZX) | 65 ± 3 MPap. 2: Tensile strength (MPa) (ZX) | ISO 527as printedbefore annealed | not in the median: measured after moisture conditioning |
| Elongation at break XY | 2.41 ± 0.05 %p. 1: Elongation at break (%) | ISO 527annealed at 100 °C for 8 hannealed at 100 ºC for 8h | not in the median: measured after moisture conditioning |
| Elongation at break XY | 2.92 ± 0.13 %p. 2: Elongation at break (%) (XY) | ISO 527as printedbefore annealed | not in the median: measured after moisture conditioning |
| Elongation at break Z (ZX) | 1.90 ± 0.15 %p. 2: Elongation at break (%) (ZX) | ISO 527as printedbefore annealed | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 5958 ± 96 MPap. 1: Bending modulus (MPa) | ISO 178annealed at 100 °C for 8 hannealed at 100 ºC for 8h | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 5403 ± 123 MPap. 2: Bending modulus (MPa) | ISO 178as printedbefore annealed | not in the median: measured after moisture conditioning |
| Flexural strength XY | 168 ± 5 MPap. 1: Bending strength (MPa) | ISO 178annealed at 100 °C for 8 hannealed at 100 ºC for 8h | not in the median: measured after moisture conditioning |
| Flexural strength XY | 162 ± 3 MPap. 2: Bending strength (MPa) | ISO 178as printedbefore annealed | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 7.59 ± 0.80 kJ/m²p. 1: Charpy impact strength (kJ/m²) | ISO 179annealed at 100 °C for 8 hannealed at 100 ºC for 8h | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 12.55 ± 0.86 kJ/m²p. 2: Charpy impact strength (kJ/m²) | ISO 179as printedbefore annealed | not in the median: measured after moisture conditioning |
| HDT at 0.45 MPa | 196 °Cp. 2: Heat distortion temperature (°C) (196) | ISO 75As the sheet prints it: ISO 75; 0.45 MPaannealed at 100 °C for 8 hannealed at 100 ºC for 8h | in the median |
| HDT at 1.8 MPa | 118 °Cp. 2: Heat distortion temperature (°C) (118) | ISO 75As the sheet prints it: ISO 75; 1.8 MPaannealed at 100 °C for 8 hannealed at 100 ºC for 8h | in the median |
| Density | 1.29 g/cm³p. 1: Density | specimen not stated, ISO 1183, GB/T 1033moisture state not statedprint settings not stated | |
| Water absorption | 1.40 %p. 1: Water absorption (%) | specimen not stated, ISO 62As the sheet prints it: ISO 62: Method 1 | |
| Melt mass-flow rate | 5.5 g/10 minp. 2: Melt flow index (g/10 min) | specimen not stated, no standard namedAs the sheet prints it: 2.16 kg | |
| Fibre content | 25 wt.%p. 1: Fibre content | specimen not stated, no standard statedmoisture state not statedprint settings not stated | |
Print settings
- Nozzle
- 300–330 °Cown data sheet
- Bed
- 70–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80–100 °C for ≥ 8 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 100 °C for 8 hown data sheet
Its 2 print profiles, in the documents' words
- Drying at least 8 hours at 80-100°C or moreRaise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 1: the notes under the test specimens' conditions, the sheet's only printing guidance. Its nozzle and bed temperatures are the specimens' print conditions, which are not printing guidance.
- Nozzle 300-330℃; Bed 70-80℃; Drying at least 8 hours at 80-100°C or moreRaise3D, Hyper Core PPA GF25p. 1: Printing Guide: Recommended Print Settings; Printing Notifications
Price
Not in the price sample.
Its 3 documents
What the maker says (33)
- Good for
It's suitable for applications such as automotive parts, jigs & fixtures, as well as for insulating housings, etc.
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 1 - Adhesion between layers
As a result, Hyper Core PPA GF25 offers not only higher Z-direction strength, smoother surface quality, but also, and above all, higher performance-cost ratio and a wide range of color options.
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 1 - Odour and emissions
Odor / Almost odorless
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 1 - Moisture sensitivity
After drying, we recommend storing the filament into Raise3D Filament Dry Box during the printing.
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 2 - Nozzle wear
Using abrasion resistance nozzle, as hardened steel and above grade nozzle is highly recommended.
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 2 - Supports and removal
Otherwise, the support structure could be permanently bonded to the model after moisture absorption.
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 2 - Supports and removal
If this filament is used as the support material for itself, please remove the support structure after annealing.
Raise3D, Raise3D Hyper Core PPA GF25 Technical Data Sheetp. 2 - Good for
Fiber-reinforced composite filaments are well known material for end-use parts production and heavy-duty applications with superior strength, stiff and heat resistance.
Raise3D, Hyper Core PPA GF25p. 1 - Pitfalls and limitations
However, high-speed printing using fiber-reinforced filament brings many challenges, such as lower flowability and poorer interlayer bonding quality, and quicker wearing out of the nozzle.
Raise3D, Hyper Core PPA GF25p. 1 - Benefits
To overcome these challenges, Raise3D has developed a new extrusion technology to form a cross-section of the filament with a fiber-rich inner core and a polymer-coated outer skin for the Hyper Core family.
Raise3D, Hyper Core PPA GF25p. 1 - Adhesion between layers
During high-speed FFF printing, the thick polymer skin of Hyper Core PPA GF25 filament improves polymer healing and welding process across the interface of adjacent layers and lines.
Raise3D, Hyper Core PPA GF25p. 1 - Benefits
The Hyper Core PPA GF25 is optimized for a fast melt rate in the hot end as well as a good balance of print efficiency, quality, performance and cost.
Raise3D, Hyper Core PPA GF25p. 1 - Benefits
Thanks to the special coated skin and fiber (25wt.%) distribution structure, Hyper Core PPA GF25 exhibits a high stiffness (6.6 GPa), strength (98 MPa), heat resistance (189 ℃) as well as outstanding printing quality.
Raise3D, Hyper Core PPA GF25p. 1 - Good for
Hyper Core PPA GF25 is an ideal choice for diverse industrial applications where high performance, stability and cost-efficiency are required.
Raise3D, Hyper Core PPA GF25p. 1 - Benefits
Tailored fiber distribution
Raise3D, Hyper Core PPA GF25p. 1 - Benefits
High strength and stiffness
Raise3D, Hyper Core PPA GF25p. 1 - Benefits
High temperature resistance
Raise3D, Hyper Core PPA GF25p. 1 - Adhesion between layers
Enhanced interlayer bonding
Raise3D, Hyper Core PPA GF25p. 1 - Surface finish
Smooth surface finish
Raise3D, Hyper Core PPA GF25p. 1 - Nozzle wear
Lower nozzle abrasion
Raise3D, Hyper Core PPA GF25p. 1 - Benefits
Cost-effectiveness
Raise3D, Hyper Core PPA GF25p. 1 - Good for
Jigs & Fixtures
Raise3D, Hyper Core PPA GF25p. 1 - Good for
Functional Parts
Raise3D, Hyper Core PPA GF25p. 1 - Good for
Manufacturing aids
Raise3D, Hyper Core PPA GF25p. 1 - Good for
Electrical and electronics (E&E) industry
Raise3D, Hyper Core PPA GF25p. 1 - Nozzle wear
Abrasion of the brass nozzle happens frequently when printing Hyper Core PPA GF25.
Raise3D, Hyper Core PPA GF25p. 1 - Nozzle wear
Using an abrasion-resistant nozzle, at minimum a Steel nozzle should be used or preferably, a SiC nozzle.
Raise3D, Hyper Core PPA GF25p. 1 - Moisture sensitivity
Please dry the filament for a long time, at least 8 hours at 80-100°C or more to get the full print quality of Raise3D Hyper Core PPA GF25.
Raise3D, Hyper Core PPA GF25p. 1 - Moisture sensitivity
After drying, we recommend storing Hyper Core PPA GF25 filament inside the Raise3D Filament Dry Box during the printing.
Raise3D, Hyper Core PPA GF25p. 1 - Printing advice
After printing, it is recommended to anneal the printed part at 80-100°C for 8 hours.
Raise3D, Hyper Core PPA GF25p. 1 - Warping and shrinkage
After annealing, a maximum of 0.5% dimensional shrinkage may be observed along the Z-axis depending on infill and layer height, with no discernible dimensional shrinkage in XY-axis.
Raise3D, Hyper Core PPA GF25p. 1 - Supports and removal
If Hyper Core PPA GF25 is used as the support material for itself, please remove the support structure after annealing.
Raise3D, Hyper Core PPA GF25p. 1 - Supports and removal
Otherwise, the support structure may be permanently bonded to the model after moisture absorption.
Raise3D, Hyper Core PPA GF25p. 1
Raise3D Industrial PPA GFStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Izod notched, kJ/m²—HDT 0.45, °C147HDT 1.8, °C101Price, CAD/kg—Nozzle, °C280–320Bed, °C65–80Chamber, °C—Drying, °C, h80–1006–12 h
Raise3D Industrial PPA GFRaise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Raise3D, Raise3D Industrial PPA GF Technical Data Sheet12 values | |||
| Tensile modulus XY | 4850 ± 200 MPap. 1: Young’s modulus (X-Y) ISO 527 | ISO 527after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 100 °C for 8 hAll specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 89 ± 3 MPap. 1: Tensile strength (X-Y) ISO 527 | ISO 527after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 100 °C for 8 hAll specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Elongation at break XY | 2.2 ± 0.1 %p. 1: Elongation at break (X-Y) ISO 527 | ISO 527after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 100 °C for 8 hAll specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 4580 ± 150 MPap. 1: Bending modulus (X-Y) ISO 178 | ISO 178after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 100 °C for 8 hAll specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Flexural strength XY | 143 ± 12 MPap. 1: Bending strength (X-Y) ISO 178 | ISO 178after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 100 °C for 8 hAll specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 6.0 ± 1.0 kJ/m2p. 1: Charpy impact strength (X-Y) ISO 179 | ISO 179after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 100 °C for 8 hAll specimens were annealed at 100°C for 8h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| HDT at 0.45 MPa | 147 °Cp. 1: Heat Deflection Temperature (°C) (147) | ISO 75As the sheet prints it: ISO75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 101 °Cp. 1: Heat Deflection Temperature (°C) (101) | ISO 75As the sheet prints it: ISO75; 1.8MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.16 g/cm³p. 1: Density (g/cm³ at 21.5 °C) | ISO 1183tested at 21.5 °C | |
| Moisture content | 0.6 %p. 1: Moisture content (%) | ISO 62As the sheet prints it: ISO 62: Method 1 | |
| Melt mass-flow rate | 15 g/10 minp. 1: Melt index (g/10 min) | no standard namedAs the sheet prints it: 2.16 kg | |
| Fibre content | 15wt.%p. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 280–320 °Cown data sheet
- Bed
- 65–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80–100 °C for 6–12 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 100 °C for 8 hown data sheet
Its 2 print profiles, in the documents' words
- Drying Please dry the filament at 80-100°C for 6-12 hoursRaise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 2: Drying note; p. 2: Nozzle note
- Nozzle 280-320℃; Bed 65-80℃; Drying 80-100°C for 4 to 6 hoursRaise3D, PPA GFp. 1: Printing Guide: Recommended Print Settings; Printing Notifications
Price
Not in the price sample.
Its 3 documents
What the maker says (23)
- Good for
end-use applications in automotive, aerospace, electrical and electronics (E&E)
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 1 - Benefits
PPA is distinguished from aliphatic polyamides (e.g.PA6) by higher melting point, glass transition temperature (Tg), lower moisture absorption, and greater dimensional stability.
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 1 - Odour and emissions
Odor / Almost odorless
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 1 - Warping and shrinkage
After annealing, max. 0.5% dimensional shrinkage could be observed in Z-axis depending on infill and layer height, no obvious dimensional shrinkage in XY-axis.
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 2 - Moisture sensitivity
After drying, we recommend to store PPA GF filament into Raise3D Filament Dry Box during the printing.
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 2 - Nozzle wear
Using abrasion resistance nozzle, as hardened steel and above grade nozzle is highly recommended.
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 2 - Supports and removal
Otherwise, the support structure could be permanently bonded to the model after moisture absorption.
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 2 - Supports and removal
If PPA GF is used as the support material for itself, please remove the support structure after annealing.
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 2 - Good for
A high-temperature composite filament for end-use applications
Raise3D, PPA GFp. 1 - Benefits
PPA is distinguished from aliphatic polyamides (e.g.PA6) by higher melting point, glass transition temperatures (Tg), lower moisture absorption, and greater dimensional stability.
Raise3D, PPA GFp. 1 - Good for
The incorporation of short glass fibers (15wt.%) further improves upon the properties of PPA matrix, which makes PPA GF printed parts promising for end-use applications in automotive, aerospace, electrical and electronics (E&E) industry.
Raise3D, PPA GFp. 1 - Benefits
High rigidity and strength
Raise3D, PPA GFp. 1 - Benefits
Excellent thermal performance
Raise3D, PPA GFp. 1 - Moisture sensitivity
Lower moisture absorption
Raise3D, PPA GFp. 1 - Warping and shrinkage
Dimensional stability
Raise3D, PPA GFp. 1 - Benefits
Chemical resistance
Raise3D, PPA GFp. 1 - Benefits
Higher heat distortion temperatures
Raise3D, PPA GFp. 1 - Benefits
cost-effective
Raise3D, PPA GFp. 1 - Benefits
High Performance-cost Ratio
Raise3D, PPA GFp. 1 - Printing advice
Cooling fan OFF
Raise3D, PPA GFp. 1 - Moisture sensitivity
Drying temperature (°C) 80-100°C for 4 to 6 hours
Raise3D, PPA GFp. 1 - Nozzle wear
Abrasion of the brass nozzle happens frequently when printing PPA GF. Using an abrasion-resistant nozzle, at minimum a Steel nozzle should be used or preferably, a SiC nozzle.
Raise3D, PPA GFp. 1 - Printing advice
After the printing, it is recommended to anneal the model in the oven at 80-100°C for 4 to 8 hours and cool the room temperature naturally.
Raise3D, PPA GFp. 1
Chemicals and environment (1)
- Post-processing: described in words
After the printing, it is recommended to anneal the printed part at 80-100°C for 8 hours.
Raise3D, Raise3D Industrial PPA GF Technical Data Sheetp. 2: Annealing note
No product matches "".
Values are for the colour each sheet tested; pigment can change them.