PA612-CF
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- measured after annealing
- hardened nozzle
- not published
How the numbers are worked out
Polymaker Fiberon PA612-CF15Strength XY, MPa91.9Strength Z, MPa48.3Modulus XY, GPa5.14Charpy notched, kJ/m²8.1HDT 0.45, °C175HDT 1.8, °C114Price, CAD/kg98Nozzle, °C250–300Bed, °C40–50Chamber, °CnoneDrying, °C, h10010 h
Polymaker Fiberon PA612-CF15Polymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheet34 valuesUnless a row says otherwise: printed specimenannealed at 100 °C for 16 hAll specimens were annealed at 100 °C for 16 hprint settingsPrinting temperature 300 °C Infill 100% Bed temperature 50 °C Shell 2 Top & bottom layer 3 Cooling fan OFF FLEXURAL TESTING SPECIMEN TENSILE TESTING SPECIMEN IMPACT TESTING SPECIMEN ASTM D638 (ISO 527, GB/T 1040) ASTM D638 (ISO 527, GB/T 1040) ASTM D638 (ISO 179, GB/T 1043) 150. 00 80.00 80. 00 60. 00 114.00 45. 00° 80. | |||
| Tensile modulus XY | 5136.7 ± 192.2 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040dryDry | in the median |
| Tensile modulus XY | 3990.8 ± 136.5 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Tensile modulus Z | 2786.4 ± 78.4 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040dryDry | in the median |
| Tensile modulus Z | 2386.8 ± 150.2 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 91.9 ± 2.0 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040dryDry | in the median |
| Tensile strength (yield or break not stated) XY | 83.1 ± 2.2 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) Z | 48.3 ± 3.9 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040dryDry | in the median |
| Tensile strength (yield or break not stated) Z | 35.6 ± 3.0 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Elongation at break XY | 2.6 ± 0.2 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040dryDry | in the median |
| Elongation at break XY | 4.1 ± 0.3 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Elongation at break Z | 2.1 ± 0.2 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040dryDry | in the median |
| Elongation at break Z | 1.7 ± 0.2 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 4583.5 ± 62.7 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341dryDry | in the median |
| Flexural modulus XY | 3888.3 ± 56.3 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Flexural modulus Z | 2264.8 ± 203.8 MPap. 1: Bending modulus (Z) | ISO 178, GB/T 9341dryDry | in the median |
| Flexural modulus Z | 1764.5 ± 98.9 MPap. 1: Bending modulus (Z) | ISO 178, GB/T 9341after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Flexural strength XY | 138.0 ± 2.2 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341dryDry | in the median |
| Flexural strength XY | 118.1 ± 1.6 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Flexural strength Z | 73.5 ± 3.9 MPap. 1: Bending strength (Z) | ISO 178, GB/T 9341dryDry | in the median |
| Flexural strength Z | 64.6 ± 2.0 MPap. 1: Bending strength (Z) | ISO 178, GB/T 9341after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 8.1 ± 0.8 kJ/m2p. 1: Charpy impact strength (X-Y) notched | ISO 179dryDry | in the median |
| Charpy impact strength XY | 29.9 ± 1.6 kJ/m2p. 1: Charpy impact strength (X-Y)un-notched | ISO 179, GB/T 1043dryDry | not in the median: unnotched |
| Charpy impact strength XY | 7.7 ± 0.5 kJ/m2p. 1: Charpy impact strength (X-Y) notched | ISO 179, GB/T 1043after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 41.0 ± 1.4 kJ/m2p. 1: Charpy impact strength (X-Y)un-notched | ISO 179, GB/T 1043after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| Charpy impact strength Z | 12.6 ± 1.4 kJ/m2p. 1: Charpy impact strength (Z) un-notched | ISO 179, GB/T 1043dryDry | not in the median: unnotched |
| Charpy impact strength Z | 17.6 ± 2.0 kJ/m2p. 1: Charpy impact strength (Z) un-notched | ISO 179, GB/T 1043after moisture conditioningWet (conditioning specified in source) | not in the median: measured after moisture conditioning |
| HDT at 0.45 MPa | 175 °Cp. 1: Heat deflection temp. | ISO 75As the sheet prints it: ISO 75 0.45MPa | in the median |
| HDT at 1.8 MPa | 114 °Cp. 1: Heat deflection temp. 1.8MPa | ISO 75As the sheet prints it: ISO 75 1.8MPa | in the median |
| Vicat softening temperature | 206.2 °Cp. 1: Vicat softening temp. | ISO 306, GB/T 1633 | |
| Melting temperature | 210 °Cp. 1: Melting temperature | DSCAs the sheet prints it: DSC, 10°C/min | |
| Crystallization temperature | 180 °Cp. 1: Crystallization temp. | DSCAs the sheet prints it: DSC, 10°C/min | |
| Density | 1.03 g/cm3p. 1: Density | specimen not stated, ISO 1183, GB/T 1033treatment not stated | |
| Water absorption | 2.2 %p. 1: Equilibrium water absorption | no standard namedAs the sheet prints it: Equilibrium water absorption, 70% RH, 23 °C (moisture absorption curve) | |
| Melt mass-flow rate | 9.9 g/10min g/10 minp. 1: Melt index | no standard namedAs the sheet prints it: 260 °C, 2.16 kg | |
| Polymaker, Fiberon PA612-CF15 official maker product page1 value | |||
| Fibre content | 15% carbon fiber contentp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 250–300 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 100 °C for 10 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 100 °C for 16 hown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Polymaker, Fiberon PA612-CF15 official maker product page.
Its 2 print profiles, in the documents' words
- Nozzle 250-300 °C; Bed 40-50 °C; Chamber Room Temp.; Drying 100 °C/10HPolymaker, Fiberon™ PA612-CF15 Technical Data SheetRecommended printing settings
- Nozzle 250-300 °C; Bed 25-50 °C; Drying 100°C for 10hPolymaker, Fiberon PA612-CF15 official maker product pagep. 1: Technical Specifications
Price
98 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 98 CAD/kgPolymaker Fiberon PA612-CF15 1.75mm 500g (SKU PMK-FBR-PA612-CF15-500)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (10)
- Warping and shrinkage
In addition, the carbon fiber reinforcement and Warpfree™ technology enhance the size stability of the prints produced with this material.
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Moisture sensitivity
Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials.
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Moisture sensitivity
Fiberon™ PA612-CF15 is sensitive to moisture and should always be stored and used under dry conditions (relative humidity below 20%).
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Nozzle wear
Normally, the life of a brass nozzle would be approximately 9h.
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Nozzle wear
Abrasion of the brass nozzle happens frequently when printing Fiberon™ PA612-CF15.
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Nozzle wear
A wear-resistance nozzle, such as hardened steel and ruby nozzle, is highly recommended to be used with Fiberon™ PA612-CF15.
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Supports and removal
Otherwise, the support structure can be permanently bonded to the model.
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Supports and removal
If Fiberon™ PA612-CF15 is used as the support material for itself, please remove the support structure before excessive moisture absorption.
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1 - Good for
Ideal for Industrial and Engineering Applications Perfect for automotive, aerospace, robotics, jigs, fixtures, and end-use components where dimensional stability, moisture resistance, and mechanical performance are critical.
Polymaker, Fiberon PA612-CF15 official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 202 - Pitfalls and limitations
Moisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.
Polymaker, Fiberon PA612-CF15 official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 295
Specimen preparation (1)
All specimens were annealed at 100°C for 16h, and immerged in water at 60°C for 48h prior to testing
Polymaker, Fiberon™ PA612-CF15 Technical Data SheetTest specimen preparation
Chemicals and environment (1)
- Post-processing: described in words
Annealing temp. and time 100 °C/16H
Polymaker, Fiberon™ PA612-CF15 Technical Data Sheetp. 1: Annealing temp. and time
QIDI PA612-CFStrength XY, MPa77Strength Z, MPa38.6Modulus XY, GPa4.88Charpy notched, kJ/m²10HDT 0.45, °C136HDT 1.8, °C78Price, CAD/kg—Nozzle, °C280–300Bed, °C40–70Chamber, °C—Drying, °C, h80–1004–6 h
QIDI PA612-CFQIDI
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| QIDI, Technical Data Sheet QIDI PA612-CF24 valuesThe same values also in QIDI, Choose the right filament - 3D Filaments Guide for QIDI Printers - QIDI CA Store.Unless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 4884.83 ± 199.19 MPap. 2: 拉伸模量(X-Y) ISO 527 | ISO 527As the sheet prints it: as printed ISO 527as printedAs printed | in the median |
| Tensile modulus XY | 5206.35±210.18 MPap. 2: Young’s modulus(X-Y) | ISO 527annealed at 100 °C for 8 h | not in the median: annealed; the as-printed value is in it |
| Tensile modulus Z | 2892.15 ± 46.60 MPap. 3: Tensile strength (Z) 拉伸模量(Z) ISO 527 Young’s modulus (Z) | ISO 527as printedUnannealed | in the median |
| Tensile strength (yield or break not stated) XY | 83.34 ± 0.30 MPap. 2: Tensile strength(X-Y) | ISO 527annealed at 100 °C for 8 h | not in the median: annealed; the as-printed value is in it |
| Tensile strength (yield or break not stated) XY | 76.95±1.17 MPa | ISO 527as printedUnannealed | in the median |
| Tensile strength (yield or break not stated) Z | 38.61 ± 2.19 MPap. 3: 拉伸强度 (Z) Tensile strength (Z) | no standard statedas printedUnannealed | in the median |
| Elongation at break XY | 3.16 ± 0.13 %p. 2: Elongation at break (X-Y) | no standard namedAs the sheet prints it: annealed | not in the median: annealed; the as-printed value is in it |
| Elongation at break XY | 3.62±0.29 % | ISO 527as printedUnannealed | in the median |
| Elongation at break Z | 1.63 ± 0.10 %p. 3: Young’s modulus (Z) 断裂伸长率(Z) Elongation at break (Z) | no standard statedas printedUnannealed | in the median |
| Flexural modulus XY | 4305.11 ± 129.44 MPap. 2: Bending modulus (X-Y) | no standard namedAs the sheet prints it: annealed | not in the median: annealed; the as-printed value is in it |
| Flexural modulus XY | 3915.93±195.30 MPa | ISO 178as printedUnannealed | in the median |
| Flexural strength XY | 124.07 ± 2.36 MPap. 2: Bending strength (X-Y) | no standard namedAs the sheet prints it: annealed | not in the median: annealed; the as-printed value is in it |
| Flexural strength XY | 114.12±1.93 MPa | ISO 178as printedUnannealed | in the median |
| Charpy impact strength XY | 10.01±0.83 KJ/㎡p. 2: 缺口冲击强度 （X-Y） (Charpy impact strength (X-Y) on page 3) (Unannealed) | ISO 179as printedUnannealed | in the median |
| Charpy impact strength XY | 7.20±1.35 KJ/㎡p. 2: 缺口冲击强度 （X-Y） (Charpy impact strength (X-Y) on page 3) (Annealed) | ISO 179annealed at 100 °C for 8 hnotched | not in the median: annealed; the as-printed value is in it |
| HDT at 0.45 MPa | 135.7 °Cp. 2: ISO 75: Method B (0.45MPa), Unannealed | ISO 75As the sheet prints it: ISO 75: Method B; 0.45MPaas printedUnannealed | in the median |
| HDT at 0.45 MPa | 138.2 °Cp. 2: ISO 75: Method B (0.45MPa), Annealedalso in QIDI, Choose the right filament - 3D Filaments Guide for QIDI Printers - QIDI CA Store | ISO 75As the sheet prints it: ISO 75: Method B; 0.45MPa | not in the median: annealed; the as-printed value is in it |
| HDT at 1.8 MPa | 78.4 °Cp. 2: 热变形温度 ISO 75: Method A(1.80 MPa) | ISO 75As the sheet prints it: 1.80 MPa as printed ISO 75as printedAs printed | in the median |
| HDT at 1.8 MPa | 99.6 °Cp. 2: 热变形温度 ISO 75: Method A(1.80 MPa), Annealed | ISO 75As the sheet prints it: ISO 75: Method A; 1.80 MPa | not in the median: annealed; the as-printed value is in it |
| Melting temperature | 167 °Cp. 2: 熔点 ISO 11357 Melting Temperature | specimen not stated, ISO 11357 | |
| Density | 1.09 g/cm³p. 2: 密度 ISO 1183 | specimen not stated, ISO 1183 | |
| Water absorption | 2.46 %p. 2: Water absorption Method 1also in QIDI, Choose the right filament - 3D Filaments Guide for QIDI Printers - QIDI CA Store | specimen not stated, no standard namedAs the sheet prints it: 1 | |
| Melt mass-flow rate | 5.1 g/10minp. 2: Melting Temperature 熔融指数 270°C, 2.16kg Melt index | specimen not stated, no standard namedAs the sheet prints it: 270°C 2.16kg | |
| Fibre content | 15% chopped carbon fiberp. 1: Fibre content | specimen not stated, no standard stated | |
| QIDI, Choose the right filament - 3D Filaments Guide for QIDI Printers - QIDI CA Store3 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) Z | 38.61MPap. 1: Layer Adhesion: Tensile Strength - Z | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural modulus XY | 4305.11MPap. 1: Bending Modulus - XY | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength XY | 124.07MPap. 1: Bending Strength - XY | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 280–300 °Cown data sheet
- Bed
- 40–70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80–100 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 100 °C for 8 hown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): drying in QIDI, Choose the right filament - 3D Filaments Guide for QIDI Printers - QIDI CA Store.
Its 2 print profiles, in the documents' words
- Nozzle 280-300℃; Bed 40-70℃; Drying After the material is damp, there will be more printing ozzing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 80-100℃ for 4-6h to restore the printing quality of QIDI PA612-CF.QIDI, Technical Data Sheet QIDI PA612-CFp. 3: Recommended printing settings; p. 4: Drying note; p. 3: Build plate temperature; p. 3: Recommended Nozzle Diameter; p. 4: Additional Suggestions 3; p. 3: Recommended build surface treatment
- Nozzle 280-300°C; Bed Textured PEI plate with PVP glue (40-70°C) / Smooth PEI plate with PVP glue (40-70°C); Drying Required; Blast Drying Oven: 80-100°C / 4-6 hQIDI, Choose the right filament - 3D Filaments Guide for QIDI Printers - QIDI CA Storep. 1: Is drying highly recommended?; p. 1: Nozzle Size/Material; p. 1: Nozzle Size/Material; p. 1: Bed Temperature & Type; p. 1: Bed Temperature & Type; p. 1: Extruder heat range; p. 1: Drying Condition (PA12-CF column)
Price
Not in the price sample.
Its 3 documents
What the maker says (12)
- Benefits
QIDI PA612-CF is the one of the lowest density FDM industrial printing material, which can easily meet the high strength and lightweight requirements of industrial applications.
QIDI, Technical Data Sheet QIDI PA612-CFp. 1 - Benefits
QIDI PA612-CF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.
QIDI, Technical Data Sheet QIDI PA612-CFp. 1 - Warping and shrinkage
Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.
QIDI, Technical Data Sheet QIDI PA612-CFp. 1 - Moisture sensitivity
QIDI PA612-CF based on modified PA612 long-chain nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.
QIDI, Technical Data Sheet QIDI PA612-CFp. 1 - Benefits
QIDI PA612-CF is specially developed for FDM 3D printing process, and its substrate material is PA612 long-chain nylon, which has low density, low moisture absorption, high strength, high abrasion resistance, excellent chemical resistance and high heat resistance.
QIDI, Technical Data Sheet QIDI PA612-CFp. 2 - Warping and shrinkage
It also has good dimensional stability, no warpage and no shrinkage during the printing process
QIDI, Technical Data Sheet QIDI PA612-CFp. 2 - Supports and removal
can be used with QIDI Quick-Remove Support material to solve the problem of poor molding effect on the support surface of complex models.
QIDI, Technical Data Sheet QIDI PA612-CFp. 2 - Moisture sensitivity
Nylon material is very easy to absorb moisture within the environment, and printing after absorbing moisture will result ozzing, extruding with bubbles and rough surface appearance, thus reducing print quality.
QIDI, Technical Data Sheet QIDI PA612-CFp. 3 - Moisture sensitivity
It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PA612-CF vacuum foil bag for printing.
QIDI, Technical Data Sheet QIDI PA612-CFp. 3 - Nozzle wear
It is recommended to use hardened steel nozzles, which can effectively improve the print quality.
QIDI, Technical Data Sheet QIDI PA612-CFp. 4 - Printing advice
Besides, it is recommended that the thickness of the heating block is longer 12mm.
QIDI, Technical Data Sheet QIDI PA612-CFp. 4 - Printing advice
After the printing is completed, the printed part can be annealed to further improve the strength of print part.
QIDI, Technical Data Sheet QIDI PA612-CFp. 4
Chemicals and environment (1)
- Post-processing: described in words
After the printing is completed, the printed part can be annealed to further improve the strength of print part. Annealing conditions: leave printing part in an oven at 80-100℃ for 4 to 8 hours and cool to room temperature naturally.
QIDI, Technical Data Sheet QIDI PA612-CFp. 4: Annealing note
Raise3D Industrial PA12 CF+Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C110HDT 1.8, °C90Price, CAD/kg242Nozzle, °C260–290Bed, °C60Chamber, °C—Drying, °C, h8012 h
Raise3D Industrial PA12 CF+Raise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheet34 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 3500 ± 50 MPap. 1: Young’s modulus (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Tensile modulus XY | 4736 ± 88 MPap. 2: Young’s modulus (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040dryDried before testing (see preparation)annealed at 80 °C for 12 hAll specimens were annealed at 80˚C for 12h and dried for 48h prior to testing | not in the median: annealed; the as-printed value is in it |
| Tensile modulus XY | 4626 ± 163 MPap. 2: Young’s modulus (X-Y) | ISO 527, GB/T 1040after moisture conditioningConditioned; immerged in ambient temperature for 3 days prior to testingannealed at 80 °C for 12 hAfter annealing; annealed at 80 °C for 12h | not in the median: measured after moisture conditioning |
| Tensile modulus Z | 1600 ± 50 MPap. 1: Young’s modulus (Z) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Tensile modulus Z | 2086 ± 92 MPap. 2: Young’s modulus (Z) ISO 527, GB/T 1040 | ISO 527, GB/T 1040dryDried before testing (see preparation)annealed at 80 °C for 12 hAll specimens were annealed at 80˚C for 12h and dried for 48h prior to testing | not in the median: annealed; the as-printed value is in it |
| Tensile modulus Z | 2074 ± 91 MPap. 2: Young’s modulus (Z) | ISO 527, GB/T 1040after moisture conditioningConditioned; immerged in ambient temperature for 3 days prior to testingannealed at 80 °C for 12 hAfter annealing; annealed at 80 °C for 12h | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 68 ± 1 MPap. 1: Tensile strength (X-Y) ISO 52 7, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 86 ± 1 MPap. 2: Tensile strength (X-Y) ISO 52 7, GB/T1040 | ISO 527, GB/T 1040dryDried before testing (see preparation)annealed at 80 °C for 12 hAll specimens were annealed at 80˚C for 12h and dried for 48h prior to testing | not in the median: annealed; the as-printed value is in it |
| Tensile strength (yield or break not stated) XY | 81 ± 2 MPap. 2: Tensile strength (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 80 °C for 12 hAll specimens were annealed at 80 °C for 12h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) Z | 34.7 ± 2.1 MPap. 1: Tensile strength (Z) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) Z | 44.7 ± 2.1 MPap. 2: Tensile strength (Z) ISO 527, GB/T 1040 | ISO 527, GB/T 1040dryDried before testing (see preparation)annealed at 80 °C for 12 hAll specimens were annealed at 80˚C for 12h and dried for 48h prior to testing | not in the median: annealed; the as-printed value is in it |
| Tensile strength (yield or break not stated) Z | 44.9 ± 1.8 MPap. 2: Tensile strength (Z) | ISO 527, GB/T 1040after moisture conditioningConditioned; immerged in ambient temperature for 3 days prior to testingannealed at 80 °C for 12 hAfter annealing; annealed at 80 °C for 12h | not in the median: measured after moisture conditioning |
| Elongation at break XY | 3.5 ± 0.1 %p. 1: Elongation at break (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Elongation at break XY | 2.8 ± 0.1 %p. 2: Elongation at break (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040dryDried before testing (see preparation)annealed at 80 °C for 12 hAll specimens were annealed at 80˚C for 12h and dried for 48h prior to testing | not in the median: annealed; the as-printed value is in it |
| Elongation at break XY | 3.8 ± 0.3 %p. 3: Elongation at break (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 80 °C for 12 hAll specimens were annealed at 80 °C for 12h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Elongation at break Z | 1.7 ± 0.2 %p. 1: Elongation at break (Z) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Elongation at break Z | 1.9 ± 0.2 %p. 2: Elongation at break (Z) ISO 527, GB/T 1040 | ISO 527, GB/T 1040dryDried before testing (see preparation)annealed at 80 °C for 12 hAll specimens were annealed at 80˚C for 12h and dried for 48h prior to testing | not in the median: annealed; the as-printed value is in it |
| Elongation at break Z | 2.2 ± 0.4 %p. 3: Elongation at break (Z) ISO 527, GB/T 1040 | ISO 527, GB/T 1040after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 80 °C for 12 hAll specimens were annealed at 80 °C for 12h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 3600 ± 70 MPap. 1: Bending modulus (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 4331 ± 90 MPap. 2: Bending modulus (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341dryDried before testing (see preparation)annealed at 80 °C for 12 hAll specimens were annealed at 80˚C for 12h and dried for 48h prior to testing | not in the median: annealed; the as-printed value is in it |
| Flexural modulus XY | 4305 ± 90 MPap. 3: Bending modulus (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 80 °C for 12 hAll specimens were annealed at 80 °C for 12h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Flexural strength XY | 98 ± 5 MPap. 2: Bending strength (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Flexural strength XY | 117 ± 2 MPap. 3: Bending strength (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 80 °C for 12 hAll specimens were annealed at 80 °C for 12h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Flexural strength XY | 125 ± 3 MPap. 2: Bending strength (X-Y) | ISO 178, GB/T 9341dryDry state; dried for 48h prior to testingannealed at 80 °C for 12 hAfter annealing; annealed at 80˚C for 12h | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength XY | 8.6 ± 0.4 kJ/m2p. 2: Charpy impact strength (X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043after moisture conditioningAll specimens were immerged in ambient temperature for 3 days prior to testingas printedAs printed | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 7.2 ± 0.3 kJ/m2p. 3: Charpy impact strength (X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)annealed at 80 °C for 12 hAll specimens were annealed at 80 °C for 12h, and immerged in ambient temperature for 3 days prior to testing | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 6.9 ± 0.3 kJ/m2 kJ/m²p. 2: Charpy impact strength (X-Y) | ISO 179, GB/T 1043dryDry state; dried for 48h prior to testingannealed at 80 °C for 12 hAfter annealing; annealed at 80˚C for 12h | not in the median: annealed; the as-printed value is in it |
| HDT at 0.45 MPa | 142 (110) °Cp. 1: Heat Deflection Temperature (°C) (142 (110)) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO75; 0.45 MPa | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 110 °Cp. 1: Heat Deflection Temperature (°C) (before annealing; 110) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO75; 0.45 MPaas printedbefore annealing | in the median |
| HDT at 1.8 MPa | 103 (90) °Cp. 1: Heat Deflection Temperature (°C) (103 (90)) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO75; 1.8MPa | not in the median: another value of this product is in it |
| HDT at 1.8 MPa | 90 °Cp. 1: Heat Deflection Temperature (°C) (before annealing; 90) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO75; 1.8MPaas printedbefore annealing | in the median |
| Density | 1.03 g/cm³p. 1: Density (g/cm³ at 23 °C) | specimen not stated, ISO 1183, GB/T 1033tested at 23 °C | |
| Melt mass-flow rate | 9.91 g/10 minp. 1: Melt index (g/10 min) | specimen not stated, no standard namedAs the sheet prints it: 2.16 kg | |
| Fibre content | 15 wt.% short carbon fibersp. 1: Fibre content | specimen not stated, no standard stated | |
Print settings
- Nozzle
- 260–290 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 12 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 80 °C for 12 hown data sheet
Its 2 print profiles, in the documents' words
- Drying Dry PA12 CF+ at 80°C for 12 hours before printing, moisture content is crucial for final printed partquality.Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 3: Recommended printing settings; p. 3: note 1
- Nozzle 260-290℃; Bed 60℃; Drying at 80°C for 12 hours before printingRaise3D, PA12 CF+p. 1: Printing Guide: Recommended Print Settings; Printing Notifications
Price
242 CAD/kgits one regular price in the sample
1 listing
- Shop3D.ca: 242 CAD/kgRaise3D Industrial PA12 CF+ Filament 1.75 mm / 1kg (SKU [S]5.11.19022A01)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (35)
- Good for
PA12CF+ is an optimal choice for lightweight and strong end-use applications, such as jigs. fixtures, and many other functional parts in manufacturing, automotive, and aerospace fields.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 1 - Benefits
PA612 inherits the best characteristics of both PA6 and PA12, such as toughness and less water absorption.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 1 - Benefits
By adding 15 wt.% short carbon fibers with optimized length distribution, mechanical, thermal properties and even surface quality of printed part are all enhanced.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 1 - Benefits
After annealing, thermal and mechanical properties are improved further.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 1 - Adhesion between layers
Compared with Raise3D Industrial PA12 CF, it exhibits higher strength-to-weight ratio, better interlayer bonding quality (Z-direction strength) and better dimensional stability.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 1 - Warping and shrinkage
After annealing, max. 0.4%-dimensional shrinkage could be observed in Z-axis depending on infill and layer height, no significant dimensional shrinkage in XY-axis.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 3 - Moisture sensitivity
Dry PA12 CF+ at 80°C for 12 hours before printing, moisture content is crucial for final printed partquality.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 3 - Moisture sensitivity
After drying, we recommend to store PA12 CF+ filaments into Raise3D Filaments Dry Box during theprinting.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 3 - Printing advice
For a small size model (side length <50 mm), annealing at 80°C for 8 hours is recommended; For a medium-size model (50mm<side length <150 mm), annealing at 80°C for 12 hours is recommended; For a large size model, 100°C for at least 12 hours is recommended.
Raise3D, Raise3D Industrial PA12 CF+ Technical Data Sheetp. 3 - Good for
A filament for end-use and functional applications
Raise3D, PA12 CF+p. 1 - Benefits
PA6, 12 inherits the best characteristics of both PA6 and PA12, such as toughness and reduced water absorption.
Raise3D, PA12 CF+p. 1 - Benefits
By adding 15 wt.% short carbon fibers with optimized length distribution, mechanical, thermal properties and even surface quality of printed parts are all enhanced.
Raise3D, PA12 CF+p. 1 - Adhesion between layers
better interlayer bonding quality (Z-direction strength)
Raise3D, PA12 CF+p. 1 - Warping and shrinkage
better dimensional stability
Raise3D, PA12 CF+p. 1 - Good for
PA12 CF+ is an optimal choice for lightweight and strong end-use applications, such as jigs, fixtures, and many other functional parts in the fields of manufacturing, automotive, and aerospace.
Raise3D, PA12 CF+p. 1 - Adhesion between layers
Superior interlayer bonding strength
Raise3D, PA12 CF+p. 1 - Benefits
Stiff and strong
Raise3D, PA12 CF+p. 1 - Benefits
High strength-to-weight ratio
Raise3D, PA12 CF+p. 1 - Warping and shrinkage
Lower shrinkage ratio
Raise3D, PA12 CF+p. 1 - Benefits
Heat and wear resistant
Raise3D, PA12 CF+p. 1 - Benefits
Chemical resistant
Raise3D, PA12 CF+p. 1 - Supports and removal
Filament: Raise3D Industrial PA12 CF Support Filament/ Raise3D Industrial PET Support Filament/ Raise3D Premium PVA+ Filament
Raise3D, PA12 CF+p. 1 - Nozzle wear
Please note, carbon fiber reinforced filament is abrasive and can wear out brass nozzles quickly.
Raise3D, PA12 CF+p. 1 - Nozzle wear
It is suggested to print carbon fiber filament with hardened nozzle.
Raise3D, PA12 CF+p. 1 - Good for
Manufacturing aids
Raise3D, PA12 CF+p. 1 - Good for
Jigs & Fixtures
Raise3D, PA12 CF+p. 1 - Benefits
High Strength
Raise3D, PA12 CF+p. 1 - Benefits
Heat Resistance
Raise3D, PA12 CF+p. 1 - Moisture sensitivity
Dry PA12 CF+ at 80°C for 12 hours before printing, as having low moisture content is crucial for the quality of the final printed part.
Raise3D, PA12 CF+p. 1 - Moisture sensitivity
Store PA12 CF+ filament inside Raise3D Filament Dry Box during printing to ensure the filament keeps its properties.
Raise3D, PA12 CF+p. 1 - Nozzle wear
Brass nozzles are subject to significant abrasion when printing with PA12 CF+.
Raise3D, PA12 CF+p. 1 - Nozzle wear
Using an abrasion-resistant nozzle, at minimum a Steel nozzle should be used or preferably, a SiC nozzle.
Raise3D, PA12 CF+p. 1 - Printing advice
After printing, it is recommended to anneal the model with support structure in the oven at 80-100°C for 8-12 hours.
Raise3D, PA12 CF+p. 1 - Supports and removal
PA12 CF+ can be used as self-supporting material on a model.
Raise3D, PA12 CF+p. 1 - Supports and removal
Please remove the support structure after annealing.
Raise3D, PA12 CF+p. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.