PA12-GF
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- converted price
- not published
How the numbers are worked out
Fiberlogy Nylon PA12+GF15Strength XY, MPa72Modulus XY, GPa3.1Charpy notched, kJ/m²16HDT 0.45, °C175HDT 1.8, °C165Price, CAD/kg247Nozzle, °C255–270Bed, °C90–110Chamber, °CnoneDrying, °C, h804 h
Fiberlogy Nylon PA12+GF15Fiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF157 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF15.Unless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3100 MPap. 1: Tensile Modulus ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF15 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 72 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 8 %p. 1: Elongation @ Break ISO 527 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF15 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 16 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 85 kJ/m2p. 1: Charpy Impact Strength (Unnotched) @ 23°C ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: unnotched |
| HDT at 0.45 MPa | 175 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 165 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF157 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF15. | |||
| Flexural modulus orientation not stated | 3000 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | 16 kJ/m²p. 1: Izod Impact Strength (Notched) @ 23°C | ISO 180tested at 23 °C | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 172 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: another value of this product is in it |
| HDT at 1.8 MPa | 155 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: another value of this product is in it |
| Vicat softening temperature | 170 °Cp. 1: Vicat Softening Temperature ISO 306 °C | ISO 306 | |
| Melting temperature | 178 °Cp. 1: Melting Temperature Tm DSC °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF15 | DSCAs the sheet prints it: Tm DSC | |
| Continuous service temperature | 100 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C | no standard namedAs the sheet prints it: UL 746 | |
| Fiberlogy, Nylon PA12+GF Filament4 values | |||
| Charpy impact strength orientation not stated | 16 kJ/m²p. 1: Charpy impact strength (notched) @ 23°C | ISO 179tested at 23 °C | not in the median: another value of this product is in it |
| Charpy impact strength orientation not stated | 85 kJ/m²p. 1: Charpy impact strength (unnotched) @ 23°C | ISO 179tested at 23 °C | not in the median: unnotched |
| Density | 1.13 g/cm³p. 1: Density | no standard stated | |
| Fibre content | 15% glass fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 255–270 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 80 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, Nylon PA12+GF Filament - Fiberlogy, Fiberlogy, Nylon PA12+GF Filament.
Its 4 print profiles, in the documents' words
- Nozzle 255°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF15p. 1: Recommended printing settings
- Nozzle 255°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+GF15p. 1: Recommended printing settings
- Nozzle 255–270°C; Bed 110°C; Chamber does not require a heated print chamber; Drying 80°C / 4 hoursFiberlogy, Nylon PA12+GF Filament - Fiberlogyp. 1: Exact-product chamber guidance: does not require a heated print chamber; p. 1: Bed material
- Nozzle 255–270°C; Bed 110°C; Drying 80°C / 4 hoursFiberlogy, Nylon PA12+GF Filamentp. 1: Description; p. 1: Description; p. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions
Price
247 CAD/kgits one regular price in the sample
1 listing
- Texas Filament Supply: 247 CAD/kgNylon PA12 + GF15 / Blackin its price; Texas Filament Supply (USD storefront) lists 87 USD for 0.5 kg: 174 USD/kg before VAT, × 1.4188 CAD per USD (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 5 documents
What the maker says (1)
- Benefits
Compared to pure PA12 nylon, it offers significantly better mechanical and chemical resistance, as well as greater durability of the finished parts.
Fiberlogy, Nylon PA12+GF Filamentp. 1
3DXTECH FIBREX PA12 GF30Strength XY, MPa82Modulus XY, GPa7.8Charpy notched, kJ/m²—HDT 0.45, °C150HDT 1.8, °C—Price, CAD/kg—Nozzle, °C265–285Bed, °C90–110Chamber, °C≤ 120Drying, °C, h904 h
3DXTECH FIBREX PA12 GF303DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, FibreX™ Glass Fiber Reinforced Nylon 12 [PA12+GF30]9 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 285°C Bed Temp: 110°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 7800 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 82 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 4.5 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 7550 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 94 MPap. 1: Flexural Strength | ISO 178 | not in the median: the only value of its test, shown as published |
| HDT at 0.45 MPa | 150 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Glass transition temperature | 158 °Cphysically implausiblep. 1: Glass Transition Temperature | DSC | not in the median: physically implausible as published |
| Density | 1.23 g/ccp. 1: Density | ISO 1183 | |
| Fibre content | PA12+GF30 %p. 1: Fibre content | specimen not stated, no standard statedprint settings not stated | |
Print settings
- Nozzle
- 265–285 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- 120 °Cown data sheet
- Drying
- 90 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, FibreX™ Glass Fiber Reinforced Nylon 12 [PA12+GF30]Recommended printing settings
- Nozzle 265-285C; Bed 90-110C; Chamber Up to 120C; Drying 90C for 4 hours3DXTECH, FIBREX™ NYLON 12+GF30Print Recommendations
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3DXTECH: 131 USD per kg, sale priceFIBREX™ NYLON 12+GF30 / Black / 1.75mm / 750g (SKU NYL18GF200750BK00)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (1)
- Moisture sensitivity
Very low moisture absorption yielding improved retention of mechanical properties even when exposed to humid environments
3DXTECH, FIBREX™ NYLON 12+GF30p. 1
MatterHackers NylonGStrength XY, MPa95Modulus XY, GPa4Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C160Price, CAD/kg—Nozzle, °C250–265Bed, °C60–70Chamber, °C—Drying, °C, h—
MatterHackers NylonGMatterHackers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - NylonG7 values | |||
| Tensile modulus orientation not stated | 4000 MPap. 1: Tensile Modulus | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 95 MPap. 1: Tensile Strength | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 80 kJ / m² kJ/m²p. 1: Impact strength | no standard namedAs the sheet prints it: 179 / 2-1eU | not in the median: notch not stated |
| HDT at 1.8 MPa | 160 °Cp. 1: Heat deflection temp. HDT/A | no standard namedAs the sheet prints it: HDT A | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 180 °Cp. 1: Melting point | no standard stated | |
| Continuous service temperature | 90-120°Cp. 1: Max usage Temp. long term | no standard namedAs the sheet prints it: 2578 | |
| Density | 1,00 g / cm³ g/cm³p. 1: Density | no standard namedAs the sheet prints it: 1183 | |
| MatterHackers, Black NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackers1 value | |||
| Fibre content | 15%p. 1: Glass-fill Percentage | no standard stated | |
Print settings
- Nozzle
- 250–265 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle Between 250°C and 265°C; Bed 60°C / 70°CMatterHackers, TECHNICAL DATA SHEET - NylonGp. 1: Recommended printing settings
- Bed 65°CMatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1: Recommended nozzle; p. 1: Bed temperature; p. 1: Bed surface
- Bed 65°CMatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1: Recommended nozzle; p. 1: Bed temperature; p. 1: Bed surface
Price
Not in the price sample.
Its 5 documents
- MatterHackers, TECHNICAL DATA SHEET - NylonG
- MatterHackers, Black NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackers
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackers
- MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackers
What the maker says (8)
- Good for
NylonG is excellent for parts that need to absorb large amounts of kinetic energy.
MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1 - Good for
NylonG Impact Resistance Parts subjected to repeated shock
MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1 - Good for
NylonG is great for functional parts, like this 3D printed extruder.
MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1 - Benefits
Impact and shock resistant
MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1 - Surface finish
No post-processing needed
MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1 - Nozzle wear
Recommended nozzle: Olsson Ruby is best, Hardened Steel is sufficient.
MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1 - Supports and removal
Pairs great with support materials for dual extrusion prints
MatterHackers, White NylonG Glass Fiber Filament - 1.75mm (0.5kg) | MatterHackersp. 1 - Warping and shrinkage
Linear mould shrinkage 0,5
MatterHackers, TECHNICAL DATA SHEET - NylonGp. 1
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.