PC-GF
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- converted price
- not published
How the numbers are worked out
BASF Forward AM Ultrafuse PC GF30Strength XY, MPa36.1Strength Z, MPa11.2Modulus XY, GPa2.67Charpy notched, kJ/m²6.1HDT 0.45, °C134HDT 1.8, °C124Price, CAD/kg—Nozzle, °C280–330Bed, °C80–100Drying, °C, h1004–16 h
BASF Forward AM Ultrafuse PC GF30BASF Forward AM
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
BASF Forward AM, Ultrafuse PC GF30 Technical Data Sheet34 valuesUnless a row says otherwise: printed specimenmoistureKept dry; TDS recommends drying before printingprint settingsPrint direction XY, Flat | |||
| Tensile modulus XY | 2665 MPap. 3: Tensile modulus (XY) | ISO 527 | in the median |
| Tensile modulus Z (ZX) | 1231 MPap. 3: Tensile modulus (ZX) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 36.1 MPap. 3: Tensile strength (endpoint unspecified) (XY) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z (ZX) | 11.2 MPap. 3: Tensile strength (endpoint unspecified) (ZX) | ISO 527 | in the median |
| Elongation at break XY | 2.4 %p. 3: Elongation at break (XY) | ISO 527 | in the median |
| Elongation at break Z (ZX) | 1.1 %p. 3: Elongation at break (ZX) | ISO 527 | in the median |
| Flexural modulus XY | 2690 MPap. 3: Flexural modulus (XY) | ISO 178 | in the median |
| Flexural modulus XZ | 3450 MPap. 3: Flexural modulus (XZ) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 934 MPap. 3: Flexural modulus (ZX) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 63.4 MPap. 3: Flexural strength (XY) | ISO 178 | in the median |
| Flexural strength XZ | 78.8 MPap. 3: Flexural strength (XZ) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 19 MPap. 3: Flexural strength (ZX) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural elongation at break XY | 3.2 %p. 3: Flexural elongation at break (XY) | ISO 178 | listed under other properties |
| Flexural elongation at break XZ | 2.9 %p. 3: Flexural elongation at break (XZ) | ISO 178 | listed under other properties |
| Flexural elongation at break ZX | 2.5 %p. 3: Flexural elongation at break (ZX) | ISO 178 | listed under other properties |
| Charpy impact strength XY | 6.1 kJ/m²p. 3: Charpy strength, notched (XY) | ISO 179As the sheet prints it: ISO 179-2 | in the median |
| Charpy impact strength XY | 17.1 kJ/m²p. 3: Charpy strength, unnotched (XY) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Charpy impact strength XZ | 6.5 kJ/m²p. 3: Charpy strength, notched (XZ) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength ZX | 1.8 kJ/m²p. 3: Charpy strength, notched (ZX) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XZ | 18.9 kJ/m²p. 3: Charpy strength, unnotched (XZ) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Charpy impact strength ZX | 3.7 kJ/m²p. 3: Charpy strength, unnotched (ZX) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Izod impact strength XY | 5.6 kJ/m²p. 3: Izod impact strength, notched (XY) | ISO 180 | in the median |
| Izod impact strength XY | 13.9 kJ/m²p. 3: Izod impact strength, unnotched (XY) | ISO 180 | not in the median: unnotched |
| Izod impact strength XZ | 5.4 kJ/m²p. 3: Izod impact strength, notched (XZ) | ISO 180 | not in the median: measured on a bar in another orientation |
| Izod impact strength ZX | 2.1 kJ/m²p. 3: Izod impact strength, notched (ZX) | ISO 180 | not in the median: measured on a bar in another orientation |
| Izod impact strength XZ | 17.8 kJ/m²p. 3: Izod impact strength, unnotched (XZ) | ISO 180 | not in the median: unnotched |
| Izod impact strength ZX | 3.4 kJ/m²p. 3: Izod impact strength, unnotched (ZX) | ISO 180 | not in the median: unnotched |
| HDT at 0.45 MPa | 134 °Cp. 2: HDT at 0.45 MPa | Printed part / TDS material-property section, ISO 75As the sheet prints it: ISO 75-2, 0.45 MPa | in the median |
| HDT at 1.8 MPa | 124 °Cp. 2: HDT at 1.8 MPa | Printed part / TDS material-property section, ISO 75As the sheet prints it: ISO 75-2, 1.8 MPa | in the median |
| Glass transition temperature | 142 °Cp. 2: Glass Transition Temperature | Printed part / TDS material-property section, ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Melting temperature | 259 °Cp. 2: Melting Temperature | Printed part / TDS material-property section, ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1176 kg/m³p. 2: Printed Part Density | printed part, ISO 1183As the sheet prints it: ISO 1183-1 | |
| Melt volume-flow rate | 26 cm³/10 minp. 2: Melt Volume Rate | specimen not stated, ISO 1133As the sheet prints it: ISO 1133; 300 °C, 2.16 kg | |
| Fibre content | 30% glass fibersp. 1: Fibre content | specimen not stated, no standard statedmoisture state not statedprint settings not stated | |
| BASF Forward AM, Ultrafuse® PC GF30 - FORWARD AM2 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) ZX | 11,2 MPap. 1: Tensile Strength (MPa) | no standard stated | not in the median: measured on a bar in another orientation |
| Elongation at break ZX | 1,1 %p. 1: Elongation at Break (%) | no standard stated | not in the median: measured on a bar in another orientation |
Print settings
- Nozzle
- 280–330 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- no setpointown data sheet
- Drying
- 100 °C for 4–16 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 280-330 °C; Bed 80-100 °C; Chamber -; Drying 100 °C for 4-16 h in hot-air dryer or vacuum ovenBASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetp. 2: Recommended 3D-print processing parameters; p. 2: Build Chamber Temperature
- Nozzle 280 - 330 °C; Bed 80 - 100 °CBASF Forward AM, Ultrafuse® PC GF30 - FORWARD AMp. 1: Nozzle Temperature; p. 1: Bed Temperature; p. 1: Bed Material; p. 1: Nozzle Diameter
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- Shop3D.ca: 147 per kg, sale priceForward AM Ultrafuse® PC GF30 - 700 grams / 1.75mm (SKU 50768366)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 3 documents
What the maker says (6)
- Benefits
The extreme stiffness makes this material highly suitable for demanding applications.
BASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetp. 1 - Benefits
Ultrafuse® PC GF30 delivers superior strength and good temperature resistance.
BASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetp. 1 - Benefits
With its resilience to UV light and its flame retardancy and V0 verification it is perfectly suitable for various industrial applications.
BASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetp. 1 - Nozzle wear
When melted, Ultrafuse® PC GF30 filament can be abrasive due to its glass reinforcement.
BASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetp. 1 - Nozzle wear
Printing with Ultrafuse® PC GF30 may reduce brass nozzles and extruder driving wheels’ lifetime.
BASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetp. 1 - Nozzle wear
For a better experience, using hardened steel nozzles and extruder driving wheels is advised.
BASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetp. 1
Chemicals and environment (3)
- UV and outdoor: described in words
UV-light resilience is a manufacturer claim
UV resistanceBASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetpp. 1-3: UV resistance - Safety: described in words
Use a well-ventilated room or professional extraction
Processing ventilationBASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetpp. 1-3: Processing ventilation - Stated limitations: described in words
Glass reinforcement may shorten brass nozzle and drive-wheel life
Abrasive wearBASF Forward AM, Ultrafuse PC GF30 Technical Data Sheetpp. 1-3: Abrasive wear
SIDDAMENT V2 PC-GFStrength XY, MPa40Strength Z, MPa30Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C125HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C90–110Drying, °C, h90–1006–8 h
SIDDAMENT V2 PC-GFSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data Sheet13 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) XY | 40±3 MPap. 1: Tensile strength (XY) | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 30±3 MPap. 1: Tensile strength (Z) | GB/T 1040 | in the median |
| Elongation at break XY | 9.5±1.5 %p. 1: Elongation at break (XY) | GB/T 1040 | in the median |
| Elongation at break Z | 7.5±1.2 %p. 1: Elongation at break (Z) | GB/T 1040 | in the median |
| Flexural modulus XY | 2100±110 MPap. 1: Flexural modulus (XY) | GB/T 9341 | in the median |
| Flexural modulus Z | 1650±110 MPap. 1: Flexural modulus (Z) | GB/T 9341 | in the median |
| Flexural strength XY | 62±3 MPap. 1: Flexural strength (XY) | GB/T 9341 | in the median |
| Flexural strength Z | 50±3 MPap. 1: Flexural strength (Z) | GB/T 9341 | in the median |
| Charpy impact strength XY | 50±3 kJ/m^2p. 1: Impact strength (XY) | GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 15±2 kJ/m^2p. 1: Impact strength (Z) | GB/T 1043 | not in the median: notch not stated |
| HDT | 125-140 °Cp. 1: Heat deflection temperature (HDT) | printed specimen (implied by the document), no standard stated | not in the median: set apart (never used to pass), no stated test load |
| Melting temperature | 240-280 °Cp. 1: Melting point | specimen not stated, no standard stated | |
| Melt mass-flow rate | 8±3 g/10min g/10 minp. 1: Melt flow rate (MFR) | specimen not stated, GB/T 3682As the sheet prints it: GB/T 3682.1-2018 | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 90–100 °C for 6–8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 250-270 °C; Bed 90-110 °C —; Drying 90–100°C for 6–8 hoursSIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data SheetRecommended printing settings; p. 1: Description
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Benefits
Combines PC's high-temperature performance with the rigidity and dimensional stability of glass fibre.
SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data Sheetp. 1 - Warping and shrinkage
Reduced warping and improved strength under load.
SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data Sheetp. 1 - Nozzle wear
Hardened nozzle recommended.
SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data Sheetp. 1 - Moisture sensitivity
PC is highly hygroscopic — store sealed with desiccant.
SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data Sheetp. 2 - Moisture sensitivity
Keep filament sealed in its original packaging or a dry box until use
SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data Sheetp. 2 - Printing advice
Allow first-layer adhesion to set before increasing print speed
SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data Sheetp. 2
Chemicals and environment (2)
- UV and outdoor: described in words
Store sealed; source specifies drying at 90-100°C for 6-8 h when wet.
EnvironmentalSIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data SheetEnvironmental - Print quality: described in words
Hardened nozzle recommended. Reduced warping is a vendor claim, not a calibrated part tolerance.
SIDDAMENT, PC-GF FILAMENT: 3D Printing Filament · Siddament V2 Range · Technical Data SheetPrint quality
Fabru Polycarbonate glass fibers 10% (PC GF10)Strength XY, MPa60Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C137Price, CAD/kg53Nozzle, °C290–320Bed, °C120–150Drying, °C, h1004 h
Fabru Polycarbonate glass fibers 10% (PC GF10)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Polycarbonate glass fibers 10% (PC GF10)10 values | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile modulus (ISO 527-2/1) | ISO 527As the sheet prints it: ISO 527-2/1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 60 MPap. 1: Yield stress (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6 %p. 1: Elongation at break (ASTM D638) | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 6 %p. 1: Elongation at yield (ISO 527-2/50) | ISO 527As the sheet prints it: ISO 527-2/50 | listed under other properties |
| HDT at 1.8 MPa | 137 °Cp. 1: Heat deflection temperature | ISO 75As the sheet prints it: 1.8 MPa (ISO 75-2) | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 142 °Cp. 1: Vicat softening temperature | no standard stated | |
| Density | 1.28 g/cm3p. 1: Density (ISO 1183) | ISO 1183 | |
| Melt mass-flow rate | 12.5 g/10minp. 1: MFR (ISO 1133) | ISO 1133 | |
| Mould shrinkage orientation not stated | 0.3-0.6 %p. 1: Shrinkage (ISO 294-4) | ISO 294As the sheet prints it: ISO 294-4 | |
| Fibre content | 10%p. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 290–320 °Cown data sheet
- Bed
- 120–150 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 100 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 290-320 °C; Bed 120-150 °C; Drying 100 °C, 4 hFabru, Polycarbonate glass fibers 10% (PC GF10)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
53 CAD/kgits one regular price in the sample
1 listing
- purefil (Fabru): 53 CAD/kgpurefil PC GF10 tiefschwarz 1kg 1.75mm (SKU 100588)in its price; purefil (Fabru) (European storefront) lists 33 EUR for 1 kg: 33 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 20 Oct 2026
Its 2 documents
What the maker says (6)
- Benefits
In addition to the high print quality, the high mechanical strength and the heat resistance, the glass fiber reinforced PC offers excellent impact strength and fracture toughness and is therefore the ideal choice for technical applications.
Fabru, Polycarbonate glass fibers 10% (PC GF10)p. 1 - Pitfalls and limitations
Caution is required with regard to stress cracks, the effects of hot water and acids / alkalis such as acetone.
Fabru, Polycarbonate glass fibers 10% (PC GF10)p. 1 - Pitfalls and limitations
The component can then become very brittle and break or shatter without warning.
Fabru, Polycarbonate glass fibers 10% (PC GF10)p. 1 - Pitfalls and limitations
PC is prone to stress cracking
Fabru, Polycarbonate glass fibers 10% (PC GF10)p. 1 - Pitfalls and limitations
PC is notch sensitive
Fabru, Polycarbonate glass fibers 10% (PC GF10)p. 1 - Pitfalls and limitations
PC is not resistant to strong acids and alkalis, aromatic and chlorinated hydrocarbons and long-term exposure to hot water
Fabru, Polycarbonate glass fibers 10% (PC GF10)p. 1
No product matches "".
Not published by any product: heated chamber.
Values are for the colour each sheet tested; pigment can change them.