PC-CF
10 products from 8 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
10 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- hardened nozzle
- not published
How the numbers are worked out
Prusa Research Prusament PC Blend Carbon Fiber by Prusa PolymersStrength XY, MPa64Modulus XY, GPa2.6Charpy notched, kJ/m²12HDT 0.45, °C114HDT 1.8, °C106Price, CAD/kg—Nozzle, °C275–295Bed, °C100–120Chamber, °C—Drying, °C, h904 h
Prusa Research Prusament PC Blend Carbon Fiber by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PC Blend Carbon Fiber by Prusa Polymers24 values | |||
| Tensile modulus XY | 2.6 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 3.2 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 64 ± 3 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength orientation not stated | 76 ± 3 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 70 ± 3 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 4.6 ± 0.4 %p. 2: Elongation at Yield Point [%] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 3.7 ± 0.5 %p. 2: Elongation at Yield Point [%] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 3.5 ± 0.2 GPap. 2: Flexural Modulus [GPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural modulus XZ | 4.2 ± 0.3 GPap. 2: Flexural Modulus [GPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 94 ± 3 MPap. 2: Flexural Strength [MPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 130 ± 2 MPap. 2: Flexural Strength [MPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 32 ± 5 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | not in the median: unnotched |
| Charpy impact strength XY | 12 ± 1 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | in the median |
| Charpy impact strength XZ | 35 ± 4 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | not in the median: unnotched |
| Charpy impact strength XZ | 17 ± 2 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | not in the median: measured on a bar in another orientation |
| Hardness | 83 Shore Dp. 2: Hardness – Shore D | no standard namedAs the sheet prints it: Prusa Polymers | in the median |
| Interlayer adhesion strength orientation not stated | 23 ± 2 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 114 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 106 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.22 g/cm3p. 2: Density [g/cm3] | no standard namedAs the sheet prints it: Prusa Polymers | |
| Water absorption | 0.09 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; duration=24 hours; humidity=22 % | |
| Water absorption | 0.11 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; duration=7 days; humidity=22 % | |
| Melt mass-flow rate | 11–13 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 5 kg | |
| Melt volume-flow rate | 10–12 cm3/10 minp. 2: MVR [cm3/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 5 kg | |
Print settings
- Nozzle
- 275–295 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 90 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 285 ± 10; Bed 110 ± 10Prusa Research, Technical datasheet Prusament PC Blend Carbon Fiber by Prusa Polymersp. 1: Nozzle Temperature [°C], Heatbed Temperature [°C]; p. 1: Bed Type
- Drying 90 °C for 4 hoursPrusa Research, Drying filament | Prusa Knowledge Basep. 1: drying
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Adhesion between layers
Note, cooling decreases significantly interlayer adhesion with just small or no effect on printing quality.
Prusa Research, Technical datasheet Prusament PC Blend Carbon Fiber by Prusa Polymersp. 1 - Printing advice
Depends on the geometry of the printed object, to improve bridges set 20 % in PrusaSlicer.
Prusa Research, Technical datasheet Prusament PC Blend Carbon Fiber by Prusa Polymersp. 1
3DXTECH CarbonX Carbon Fiber ezPC PolycarbonateStrength XY, MPa73Modulus XY, GPa6.98Charpy notched, kJ/m²—HDT 0.45, °C119HDT 1.8, °C—Price, CAD/kg152Nozzle, °C260–280Bed, °C80–100Chamber, °C—Drying, °C, h804 h
3DXTECH CarbonX Carbon Fiber ezPC Polycarbonate3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber ezPC Polycarbonate 3D Printing Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 275°C Bed Temp: 95°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 6980 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 73 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 2.1 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 6540 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 85 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 119 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66psi) | in the median |
| Glass transition temperature | 127 °Cp. 1: Glass Transition Temperature (Tg) DSC °C | DSCAs the sheet prints it: Tg DSC °C | in the median |
| Density | 1.36 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
| 3DXTECH, CarbonX Carbon Fiber ezPC safety data sheet1 value | |||
| Fibre content | <20 %p. 1: Carbon Fiber | no standard stated | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber ezPC Polycarbonate 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
- Nozzle 260-280°C; Bed 80-100C; Chamber Recommended; Drying 80C for 4 hours3DXTECH, CARBONX™ ezPC™+CFp. 1: Wide processing range; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
152 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 152 CAD/kgCarbonX™ ezPC+CF - 1.75mm 750g (SKU 3DXTECH-FL-EZPC+CF-1.75-750g-BLK)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (9)
- Warping and shrinkage
Amorphous structure gives it low, near isotropic shrinkage (very low CTE)
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Benefits
High thermal properties, especially when reinforced with carbon fiber
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Warping and shrinkage
Further improved stiffness and dimensional stability with the addition of carbon fiber reinforcement
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Odour and emissions
Very low odor emitted while printing
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Benefits
Wide processing range of 260-280°C (suitable for most desktop printers)
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Nozzle wear
Strongly recommend this material to be printed through a hardened steel nozzle rather than a softer metal.
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Good for
This material is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Good for
ezPC+CF is a clear choice for engineering-grade projects that require excellent performance and ease of printability.
3DXTECH, CARBONX™ ezPC™+CFp. 1 - Moisture sensitivity
Drying Specs 80C for 4 hours
3DXTECH, CARBONX™ ezPC™+CFp. 1
3DXTECH CarbonX CF PCStrength XY, MPa70Modulus XY, GPa6.2Charpy notched, kJ/m²—HDT 0.45, °C135HDT 1.8, °C—Price, CAD/kg—Nozzle, °C280–310Bed, °C110–120Chamber, °C—Drying, °C, h1204 h
3DXTECH CarbonX CF PC3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, CarbonX CF PC8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 300°C Bed Temp: 140°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 6200 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 70 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 2 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 5890 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 90 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 135 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Glass transition temperature | 143 °Cp. 1: Glass Transition Temperature (Tg) | DSC | in the median |
| Density | 1.36 g/ccp. 1: Density | ISO 1183 | |
| 3DXTECH, CarbonX CF PC safety data sheet1 value | |||
| Fibre content | <20 %p. 1: Carbon Fiber | no standard stated | |
Print settings
- Nozzle
- 280–310 °Cown data sheet
- Bed
- 110–120 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 120 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 4 print profiles, in the documents' words
- No temperature stated3DXTECH, CarbonX CF PCRecommended printing settings
- Nozzle 280-310C; Bed 110-120C; Chamber Recommended; Drying 120C for 4 hours3DXTECH, CARBONX™ PC+CFPrint Recommendations
- Nozzle 280-310C; Bed 110-120C; Chamber Recommended; Drying 120C for 4 hours3DXTECH, CARBONX™ PC+CFp. 1: Exact-product chamber guidance: Heated Chamber; p. 1: Nozzle Specs
- Nozzle 280-310C; Bed 110-120C; Chamber Recommended; Drying 120C for 4 hours3DXTECH, CARBONX™ PC+CFp. 1: Wide processing range; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
Not in the price sample.
Its 6 documents
What the maker says (7)
- Benefits
Further improved stiffness and dimensional stability with the addition of carbon fiber reinforcement
3DXTECH, CARBONX™ PC+CFp. 1 - Benefits
High thermal properties, Polycarb itself has a Tg of 147C
3DXTECH, CARBONX™ PC+CFp. 1 - Warping and shrinkage
Amorphous structure gives it low, near isotropic shrinkage
3DXTECH, CARBONX™ PC+CFp. 1 - Odour and emissions
Very low odor emitted while printing
3DXTECH, CARBONX™ PC+CFp. 1 - Nozzle wear
Strongly recommend this material to be printed through a hardened steel nozzle rather than a softer metal.
3DXTECH, CARBONX™ PC+CFp. 1 - Good for
This material is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.
3DXTECH, CARBONX™ PC+CFp. 1 - Benefits
Polycarbonate has a Tg of 147C and offers some of the highest thermal performance on the 3D printing market.
3DXTECH, CARBONX™ PC+CFp. 1
Prusa Research Prusament PC Space Grade Black by Prusa PolymersStrength XY, MPa72Modulus XY, GPa3.1Charpy notched, kJ/m²—HDT 0.45, °C138HDT 1.8, °C129Price, CAD/kg—Nozzle, °C280–300Bed, °C110–130Chamber, °C—Drying, °C, h904–6 h
Prusa Research Prusament PC Space Grade Black by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymers18 valuesThe same values also in Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymers. | |||
| Tensile modulus XY | 3.1 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 3.7 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 72 ± 2 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength XZ | 75 ± 2 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 3.8 ± 0.2 %p. 2: Elongation at Yield Point (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 3.0 ± 0.3 %p. 2: Elongation at Yield Point (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XZ | 4.9 ± 0.5 GPap. 2: Flexural Modulus [GPa] | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 89 ± 2.1 MPap. 2: Flexural Strength (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 104 ± 2 MPap. 2: Flexural Strength (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 22 ± 2 kJ/m²p. 2: Impact Strength Charpy [kJ/m ](3) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1 | not in the median: unnotched |
| Charpy impact strength XZ | 27 ± 2 kJ/m²p. 2: Impact Strength Charpy [kJ/m ](3) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1 | not in the median: unnotched |
| Hardness | 83 ± 1 Shore Dp. 2: Hardness – Shore Dalso in Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymers | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 18 ± 1 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 137.6 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 128.8 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.21 g/cm³p. 2: Density | ISO 1183 | |
| Water absorption | 0.18 %p. 2: Moisture Absorption in 24 hours [%](1) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=42 % | |
| Water absorption | 0.20 %p. 2: Moisture Absorption in 7 days [%](2)also in Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymers | no standard namedAs the sheet prints it: Prusa Polymers; time=7 days | |
| Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymers1 value | |||
| Flexural modulus XY | 3.7 ± 0.1 GPap. 2: Flexural Modulus | ISO 178 | in the median |
Print settings
- Nozzle
- 280–300 °Cown data sheet
- Bed
- 110–130 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 90 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle [°C] 290 ± 10; Bed [°C] 120 ± 10Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type; p. 1: Additional Info
- Nozzle [°C] 290 ± 10; Bed [°C] 120 ± 10Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type; p. 1: Additional Info
- Drying 90 °C for 4-6 hoursPrusa Research, Drying filament | Prusa Knowledge Basep. 1: drying
Price
Not in the price sample.
Its 4 documents
What the maker says (2)
- Nozzle wear
A hardened nozzle is necessary.
Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymersp. 1 - Printing advice
The brim is recommended to improve the adhesion of the edges and corners of the object.
Prusa Research, Technical datasheet Prusament PC Space Grade Black by Prusa Polymersp. 1
SIDDAMENT PC Carbon FiberStrength XY, MPa57Modulus XY, GPa—Charpy notched, kJ/m²38IzodHDT 0.45, °C117HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °C—Drying, °C, h802–4 h
SIDDAMENT PC Carbon FiberSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PC Carbon Fiber - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 57 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3.5 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2278 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 103 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 38 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 117 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), no stated test load |
| Density | 1.18 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.4 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80 °C for 2–4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260-280°C; Bed 90-110°C; Drying If damp, dry at 80°C for 2-4 hours.SIDDAMENT, PC Carbon Fiber - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PC Carbon Fiber - Technical Datasheetp. 2
Flashforge PCCF10Strength XY, MPa35Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C120HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–270Bed, °C100–120Chamber, °C25–60Drying, °C, h100≥ 4 h
Flashforge PCCF10Flashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PCCF10 Filament14 values | |||
| Tensile strength (yield or break not stated) XY | 35-40 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Elongation at break XY | 7.5-8.5 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Flexural modulus XY | 2100-2400 Mpap. 1: Bending Modulus (X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Flexural modulus XZ | 1960-2000 Mpap. 1: Bending Modulus (X-Z) ISO 178 Mpa | ISO 178print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 80-85 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Flexural strength XZ | 46.5-49 Mpap. 1: Bending Strength (X-Z) ISO 178 Mpa | ISO 178print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | not in the median: measured on a bar in another orientation |
| Izod impact strength XY | 4~5.5 KJ/m²p. 1: Izod Impact Strength (X-Y) | ISO 180print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | not in the median: notch not stated |
| Izod impact strength XZ | 2.5~3 KJ/m²p. 1: Izod Impact Strength (X-Z) | ISO 180print settingsTest Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Infill Density 100%; Infill Pattern Concentric | not in the median: notch not stated |
| HDT at 0.45 MPa | 120 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 110 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.24-1.25 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 1 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 6-10 g/10minp. 1: Melt Flow Rate (MFR) (220℃/5Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 220℃/5Kg ISO 1133 | |
| Fibre content | 10% carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 240–270 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- 25–60 °Cown data sheet
- Drying
- 100 °C for ≥ 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 240~270°C (250°C recommended); Bed 100~120°C (110°C recommended); Chamber Room temperature~60℃; Drying Using a hot dry air oven at 100°C for at least 4 hours is recommendedFlashforge, Technical Data Sheet PCCF10 Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Build Surface Material; p. 2: Nozzle & Gear Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
Dimensional stability/High rigidity/Heat resistance.
Flashforge, Technical Data Sheet PCCF10 Filamentp. 1 - Nozzle wear
Nozzle & Gear Material Hardened steel
Flashforge, Technical Data Sheet PCCF10 Filamentp. 2 - Printing advice
Higher speeds require higher temperatures.
Flashforge, Technical Data Sheet PCCF10 Filamentp. 2 - Moisture sensitivity
As the PCCF10 filament absorbs moisture easily due to the added carbon fiber, it should be dried before being used.
Flashforge, Technical Data Sheet PCCF10 Filamentp. 3 - Printing advice
After the printing process, it is recommended to dry the model in the oven at 100°C for 1- 3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet PCCF10 Filamentp. 3
Chemicals and environment (1)
- Post-processing: described in words
After the printing process, it is recommended to dry the model in the oven at 100°C for 1- 3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet PCCF10 Filamentp. 3: Post-processing note
Spectrum pc cfStrength XY, MPa76Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C140HDT 1.8, °C129Price, CAD/kg—Nozzle, °C270–290Bed, °C≥ 80Chamber, °C—Drying, °C, h75≥ 6 h
Spectrum pc cfSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, pc cf10 valuesThe same values also in Spectrum, TECHNICAL DATA SHEET PC CF.Unless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 76 MPap. 1: Tensile Strength at Yield*also in Spectrum, TECHNICAL DATA SHEET PC CF | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | >100 %physically implausiblep. 1: Tensile Elongation at Break*also in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D638As the sheet prints it: D 638 | not in the median: physically implausible as published |
| Flexural modulus orientation not stated | 24 000 kg/cm2 (TDS prints "24.000" with European decimal separator) kg/cm²transcription correctedp. 1: Flexural Modulus**also in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 920 kg/cm2 kg/cm²transcription correctedp. 1: Flexural Strength**also in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 70 kg∙cm/cm kg·cm/cmp. 1: Izod Impact Strength, Notched @ 23°Calso in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| HDT at 0.45 MPa | 140°Cp. 1: Heat Deflection Temperature 0.45mn/m2also in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D648As the sheet prints it: D 648, 0.45 MN/m² | in the median |
| HDT at 1.8 MPa | 129°Cp. 1: Heat Deflection Temperature 1.81mn/m2also in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D648As the sheet prints it: D 648, 1.81 MN/m² | in the median |
| Vicat softening temperature | 150°Cp. 1: Vicat Softening Temperaturealso in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D1525As the sheet prints it: D 1525 | |
| Density | 1.22 g/cm3p. 1: Specific Gravityalso in Spectrum, TECHNICAL DATA SHEET PC CF | ASTM D792As the sheet prints it: D 792 | |
| Fibre content | 10% carbon fiberp. 1: Fibre content | no standard stated | |
| Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–291 value | |||
| HDT at 0.45 MPa | 139°Cp. 25: HDT | no standard namedAs the sheet prints it: method=B | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 270–290 °Cown data sheet
- Bed
- at least 80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 75 °C for ≥ 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 270-290°C; Bed >80°C; Drying Drying (if wet) recommended; at least 6h at 75°C using a hot dry air ovenSpectrum, pc cfRecommended printing settings; p. 1: Drying (if wet) ***; p. 1: * settings are based on a 0.4mm nozzle
- Nozzle 270-290°C; Bed >80°C; Drying Drying (if wet) recommended; at least 6h at 75°C using a hot dry air ovenSpectrum, TECHNICAL DATA SHEET PC CFp. 1: Recommended printing settings; p. 1: Drying (if wet) ***
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended
Price
Not in the price sample.
Its 4 documents
What the maker says (6)
- Benefits
This unique combination provides higher mechanical strength, increased rigidity and excellent impact resistance, making PC CF an ideal choice for demanding engineering and industrial projects.
Spectrum, TECHNICAL DATA SHEET PC CFp. 1 - Warping and shrinkage
dimensional stability
Spectrum, TECHNICAL DATA SHEET PC CFp. 1 - Warping and shrinkage
low-warp technology
Spectrum, TECHNICAL DATA SHEET PC CFp. 1 - Moisture sensitivity
Dry box Yes
Spectrum, TECHNICAL DATA SHEET PC CFp. 1 - Nozzle wear
Ruby or hardened nozzle Yes
Spectrum, TECHNICAL DATA SHEET PC CFp. 1 - Printing advice
Closed chamber recommended for larger prints
Spectrum, TECHNICAL DATA SHEET PC CFp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
good UV resistance
UVSpectrum, TECHNICAL DATA SHEET PC CFp. 1
iSANMATE PC CFStrength XY, MPa58Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C60–80Chamber, °C—Drying, °C, h—
iSANMATE PC CFiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PC CF Filament Technical Data Sheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 58 MPap. 1: Tensile | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 15 %p. 1: Elongation | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2650 MPap. 1: Flexural | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 110 ℃transcription correctedp. 1: Vicat Softening | no standard stated | |
| Melting temperature | 240-260 ℃transcription correctedp. 1: Melting Point( | no standard stated | |
| Density | 1.18 g/cm3p. 1: Density | ASTM D792 | |
| Water absorption | <0.8 %p. 1: Water | ASTM D570 | |
| Melt mass-flow rate | 3-10 g/10minp. 1: Melt Index | ASTM D1238 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- No temperature statediSANMATE, PC CF Filament Technical Data SheetRecommended printing settings
- Nozzle 240-260 degrees; Bed 60-80°CiSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1: Product parameters
Price
Not in the price sample.
Its 3 documents
What the maker says (14)
- Benefits
PC raw materials have good rigidity and heat resistance, as follows: 1.High strength, the strength is more than 20% higher than ordinary PC; 2.High rigidity and excellent toughness; 3.Excellent heat resistance and short processing cycle; 4.Excellent hydrolysis resistance and product stability; 5.Good machinability.
iSANMATE, PC CF Filament Technical Data Sheetp. 1 - Benefits
It is designed to provide superior strength and durability, while still maintaining a high level of printability.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Benefits
It is also easy to use and has a low shrinkage rate.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Good for
The PC carbon fiber 3D printer filament is perfect for creating strong and durable parts with a high level of detail.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Good for
It is also highly resistant to heat, making it ideal for applications that require high temperature resistance.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Benefits
High rigidity and high impact resistance;
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Benefits
Excellent heat resistance;
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Benefits
Strong toughness;
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Benefits
Good fire resistance;
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Benefits
Good compatibility.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Precision and tolerance
The filament diameter is 1.75mm, keep the stable tolerance in +/-0.02mm, Strong toughness, no clogging, and ensure the great 3D printing effect.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Warping and shrinkage
Sealed printing, goodadhesion, strong adhesion,zero warpage.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Moisture sensitivity
Vacuumed packed—Some 3D printing materials can be negatively affected by moisture, that’s why 3D printer filament made by us is vacuumed sealed along with a desiccant pack.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1 - Moisture sensitivity
This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust and dirt before opening the vacuumed sealed packing.
iSANMATE, iSANMATE High Quality PC Carbon Fiber Filament For 3D Printerp. 1
Nobufil PCx CFStrength XY, MPa56Modulus XY, GPa—Charpy notched, kJ/m²5IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C275–295Bed, °C100–120Chamber, °C—Drying, °C, h804–6 h
Nobufil PCx CFNobufil
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nobufil, Technical Datasheet PCx CF13 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 56 MPap. 1: Tensile strength, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strength (yield or break not stated) orientation not stated | 68 MPap. 1: Tensile strength, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 9 %p. 1: Elongation at break, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Elongation at break orientation not stated | 11 %p. 1: Elongation at break, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 3500 MPap. 1: Flexural modulus | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 95 MPap. 1: Flexural strength | ISO 178 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 5 kJ/m²p. 1: Izod Impact strength notched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Izod impact strength orientation not stated | 4,5 kJ/m²p. 1: Izod Impact strength notched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 30 kJ/m²p. 1: Izod Impact strength unnotched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: unnotched |
| Izod impact strength orientation not stated | 70 kJ/m²p. 1: Izod Impact strength unnotched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 113 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Density | 1,23 g/cm³p. 1: Density | ISO 1183 | |
| Fibre content | 10% carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 275–295 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 285°C ± 10; Bed 110°C ± 10; Drying Pre-dry material for 4-6 hours at 80°C (max.), 6-8 hours at 70°C or 10-12 hours at 60°C.Nobufil, Technical Datasheet PCx CFp. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Due to its modification, PCx CF is easy to print while maintaining very good mechanical properties and high temperature stability.
Nobufil, Technical Datasheet PCx CFp. 1 - Nozzle wear
Nozzle hardened
Nobufil, Technical Datasheet PCx CFp. 1
Nanovia PC CFStrength XY, MPa—Modulus XY, GPa6.39Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C270–290Bed, °C100–140Chamber, °C≥ 100Drying, °C, h1006 h
Nanovia PC CFNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PC CF : Carbon fiber reinforced : Nanovia5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 6390 MPap. 1: Young’s modulus | printed specimen, ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: set apart (never used to pass), no stated orientation |
| HDT at 0.45 MPa | 144 °Cphysically implausiblep. 1: HDT | ASTM D648As the sheet prints it: ASTN D648 at 4.6 kg/cm 2 | not in the median: physically implausible as published |
| HDT at 1.8 MPa | 133 °Cphysically implausiblep. 1: HDT, its second line | ASTM D648As the sheet prints it: ASTN D648 at 18.6 kg/cm 2 | not in the median: physically implausible as published |
| Glass transition temperature | 120 °Cp. 1: Tg | no standard stated | in the median |
| Density | 1.26 g/cm3p. 1: Density | ASTM D792 | |
Print settings
- Nozzle
- 270–290 °Cown data sheet
- Bed
- 100–140 °Cown data sheet
- Heated chamber
- at least 100 °Cown data sheet
- Drying
- optional: 100 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 270 – 290 °C; Bed 100 – 140 °C; Chamber > 100 °C; Drying Dehydrate for 6 h at 100 °C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PC CF : Carbon fiber reinforced : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal); p. 1: Printing
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
this polycarbonate reinforced filament is ideal of rigid functional objects.
Nanovia, Nanovia PC CF : Carbon fiber reinforced : Nanoviap. 1 - Benefits
Nanovia PC CF allows for the creation high temperature (120°C) resistant pieces
Nanovia, Nanovia PC CF : Carbon fiber reinforced : Nanoviap. 1 - Warping and shrinkage
The carbon fibre reduces the polycarbonate’s tendency to warp during printing, whilst increasing its mechanical properties.
Nanovia, Nanovia PC CF : Carbon fiber reinforced : Nanoviap. 1 - Nozzle wear
A reinforced nozzle, suitable for abrasive materials is recommended.
Nanovia, Nanovia PC CF : Carbon fiber reinforced : Nanoviap. 1 - Nozzle wear
In order to protect your equipment we recommend using a nozzle adapted for abrasive materials
Nanovia, Nanovia PC CF : Carbon fiber reinforced : Nanoviap. 1
Chemicals and environment (1)
- UV and outdoor: described in words
These added fibres also increase the material’s UV resistance, native polycarbonate being sensitive to it.
UVNanovia, Nanovia PC CF : Carbon fiber reinforced : Nanoviap. 1
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.