ASA-CF
17 products from 15 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
17 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- from the Bambu Lab Filament Guide
- Izod where no Charpy is published
- shared data sheet
- hardened nozzle
- not published
How the numbers are worked out
Polymaker FIBERON ASA CF08Strength XY, MPa43.5Strength Z, MPa25Modulus XY, GPa3.61Charpy notched, kJ/m²5.5HDT 0.45, °C103HDT 1.8, °C97Price, CAD/kg54Nozzle, °C260–280Bed, °C90–100Chamber, °CnoneDrying, °C, h906 h
Polymaker FIBERON ASA CF08Polymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, FIBERON ASA CF0822 values | |||
| Tensile modulus XY | 3611.7 ± 181.1 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Tensile modulus Z | 1903.8 ± 71.0 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Tensile strength (yield or break not stated) XY | 43.5 ± 0.7 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Tensile strength (yield or break not stated) Z | 25.0 ± 0.4 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Elongation at break XY | 1.8 ± 0.1 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Elongation at break Z | 2.7 ± 0.2 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Flexural modulus XY | 3265.0 ± 56.5 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Flexural modulus Z | 1743.4 ± 59.9 MPap. 1: Bending modulus (Z) | ISO 178, GB/T 9341print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Flexural strength XY | 69.1 ± 1.62 MPap. 1: Bending strength (X-Y) | ISO 306, GB/T 1633print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Flexural strength Z | 46.5 ± 0.8 MPap. 1: Bending strength (Z) | ISO 306, GB/T 1633print settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Charpy impact strength XY | 5.5 ± 0.14 kJ/m2p. 1: Charpy impact strength (X-Y) notched | no standard statedprint settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | in the median |
| Charpy impact strength XY | 11.0 ± 0.5 kJ/m2p. 1: Charpy impact strength (X-Y)un-notched ISO 179, GB/T 1043 | ISO 179, GB/T 1043unnotchedprint settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | not in the median: unnotched |
| Charpy impact strength Z | 11.9 ± 0.9 kJ/m2p. 1: Charpy impact strength (Z) un-notched | no standard statedunnotchedprint settingsInfill 100%; Printing temperature 270°C; Shell 2; Bed temperature 90°C; Cooling fan OFF; Top & bottom layer 3 | not in the median: unnotched |
| HDT at 0.45 MPa | 103.0 °Cp. 1: Heat deflection temp. ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa ISO 75 | in the median |
| HDT at 1.8 MPa | 97.3 °Cp. 1: Heat deflection temp. ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa ISO 75 | in the median |
| Glass transition temperature | 106.6 °Cp. 1: Glass transition temp. DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 110.8 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633 | ISO 306, GB/T 1633 | |
| Decomposition temperature | 328.4 °Cp. 1: Decomposition temp. TGA, 20°C/min | TGA | |
| Density | 1.09 g/cm3p. 1: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033 | |
| Melt mass-flow rate | 13.9 g/10minp. 1: Melt index 240°C, 5 kg | no standard namedAs the sheet prints it: 240°C 5 kg | |
| Surface resistivity | 10^12 Ωtranscription correctedp. 1: Surface Resistivity (Ω) ANSI ESD S11.11 OL | no standard namedAs the sheet prints it: Ω ANSI ESD S11.11 OL | |
| Fibre content | 8% carbon fiberp. 1: Fibre content | no standard stated | |
| Polymaker, FIBERON ASA CF08 official maker product page3 valuesUnless a row says otherwise: printed bar (its stated orientation says so)unnotched | |||
| Charpy impact strength XY | 10.99 KJ/m²p. 1: Charpy, unnotched (XY) | ISO 179 | not in the median: unnotched |
| Charpy impact strength XY | 5.46 KJ/m²p. 1: Charpy, notched | ISO 179 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Charpy impact strength Z | 11.86 KJ/m²p. 1: Charpy, unnotched (Z) | ISO 179 | not in the median: unnotched |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 90–100 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 90 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 260-280 °C; Bed 90-100°C; Chamber Room temp.; Drying 90 °C/6HPolymaker, FIBERON ASA CF08p. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time
Price
54 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 54 CAD/kgPolymaker Fiberon ASA-CF08 1.75mm 500g / Black (SKU PMK-FBR-ASA-CF08-BLK)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (14)
- Good for
Fiberon™ ASA-CF08 is an easy-to-print, multi-colored outdoor material.
Polymaker, FIBERON ASA CF08p. 1 - Good for
It also has heat resistance close to 100°C, which is the first choice of outdoor reinforcement material.
Polymaker, FIBERON ASA CF08p. 1 - Benefits
It has far more printability than ordinary ASA and has better mechanical properties by adding 8% carbon fiber.
Polymaker, FIBERON ASA CF08p. 1 - Pitfalls and limitations
Fiberon™ ASA-CF08 contains 8% carbon fiber as reinforcement, the filament itself is easy to be brittle, please make sure that the bending diameter is more than 60mm when using it.
Polymaker, FIBERON ASA CF08p. 1 - Moisture sensitivity
Fiberon™ ASA-CF08 is sensitive to moisture and should always be stored and used under dry conditions (relative humidity below 20%).
Polymaker, FIBERON ASA CF08p. 1 - Nozzle wear
Normally, the life of a brass nozzle would be approximately 9h.
Polymaker, FIBERON ASA CF08p. 1 - Nozzle wear
Abrasion of the brass nozzle happens frequently when printing Fiberon™ ASA-CF08.
Polymaker, FIBERON ASA CF08p. 1 - Nozzle wear
A wear-resistance nozzle, such as hardened steel and ruby nozzle, is highly recommended to be used with Fiberon™ ASA-CF08.
Polymaker, FIBERON ASA CF08p. 1 - Odour and emissions
Fiberon™ ASA-CF08 may release odors during printing.
Polymaker, FIBERON ASA CF08p. 1 - Odour and emissions
Please place the printer in a well-ventilated area, and an enclosed printer is recommended for printing.
Polymaker, FIBERON ASA CF08p. 1 - Printing advice
recommended to wait for the parts to cool naturally before removing them.
Polymaker, FIBERON ASA CF08p. 1 - Good for
This material is a great choice for outdoor fixtures, housings, automotive prototypes, marine and agricultural equipment, jigs, drone frames, and more.
Polymaker, FIBERON ASA CF08 official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 293 - Pitfalls and limitations
Yes. Like all ASA filaments, it releases VOCs such as styrene when heated. Always print in a well-ventilated space, and ideally use an enclosure with a filtration system.
Polymaker, FIBERON ASA CF08 official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 305 - Pitfalls and limitations
No. ASA-CF08 is electrically insulating, with a surface resistivity greater than 10¹² Ω. It should not be used for electrostatic-sensitive applications.
Polymaker, FIBERON ASA CF08 official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 307
Bambu Lab ASA-CFStrength XY, MPa34Strength Z, MPa30Modulus XY, GPa4.2Charpy notched, kJ/m²6.2HDT 0.45, °C110HDT 1.8, °C102Price, CAD/kg—Nozzle, °C250–280Bed, °C80–100Chamber, °C45–60Drying, °C, h808 h
Bambu Lab ASA-CFBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CF20 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)annealed at 80 °C for 12 hAll the specimens were annealed and dried at 80 °C for 12 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s Infill Density 100% * All the specimens were printed at the following settings: Nozzle Temperature = 275 °C, Printing Speed = 200 mm/s, Bed Temperature = 90 °C, Infill Density= 100%. All the specimens were annealed and dried at 80 °C for 12 h before testing. And | |||
| Tensile modulus XY | 4200 ± 270 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2290 ± 260 MPAp. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 34 ± 3 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 30 ± 4 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 9.6 ± 1.4 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 4.4 ± 0.8 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 3740 ± 130 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1350 ± 120 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 72 ± 5 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 33 ± 3 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 14.0 ± 2.2 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043unnotched | not in the median: unnotched |
| Charpy impact strength XY | 6.2 ± 1.4 kJ/m² (notched)p. 2: Impact Strength (X-Y) (notched) | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 9.4 ± 0.6 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 110 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 102 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Vicat softening temperature | 108 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 210 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.02 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.33 %p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: te 25 °C, 55% RH | |
| Melt mass-flow rate | 1.74 ± 0.3 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Bambu Lab, Bambu Lab ASA-CF safety data sheet1 value | |||
| Fibre content | 5-10 %p. 4: Carbon Fiber | no standard stated | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- 45–60 °Cown data sheet
- Drying
- 80 °C for 8 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 80 °C for 12 hown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 250 - 280 °C; Bed 80 - 100°C; Chamber 45 - 60 °C; Drying Blast Drying Oven: 80 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - ASA-CFRecommended printing settings
- Drying Dry Out Before UseBambu Lab, ASA-CF official maker product pagep. 1: Cautions for Use
Price
Not in the price sample.
2 listings: 2 with no regular price per kilogram recorded
- Bambu Lab Canada: 48 per kg, sale priceASA-CF - Black (46101) / Filament with spool / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- DigitMakers: 48 per kg, sale priceBambu Lab ASA-CF Filament (Black) 1.75mm - 1kg (SKU B51-K0-1.75-1000-SPL)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (6)
- Good for
This makes it the perfect choice for large-scale models requiring durability and precision in demanding environments.
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFp. 1 - Benefits
Engineered for harsh outdoor conditions, Bambu ASA-CF offers exceptional weather and UV resistance, retaining the advantages of ASA while adding carbon fiber for increased stiffness and dimensional stability.
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFp. 1 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFp. 2 - Good for
Bambu ASA-CF stands out as one of the top materials for outdoor use, with excellent resistance to harsh weather and UV exposure. Reinforced with carbon fiber, it’s ideal for creating durable garden tools, outdoor furniture, and protective enclosures for electronics.
Bambu Lab, ASA-CF official maker product pagep. 1: exact product features/description/application tips, source text line 118 - Supports and removal
High heatbed temperatures and glue stick can cause strong adhesion between the print and the build plate. Please allow the print to cool down to room temperature naturally for easier removal and to avoid damage to the model. For more details, please refer to: Work After Printing Finished on WIKI.
Bambu Lab, ASA-CF official maker product pagep. 1: exact product features/description/application tips, source text line 153 - Pitfalls and limitations
Note: ASA-CF 1kg variant is discontinued and will not be restocked once sold out. We will be introducing a new size specification in the future. Stay tuned for further updates.
Bambu Lab, ASA-CF official maker product pagep. 1: exact product features/description/application tips, source text line 47
Specimen preparation (1)
All the specimens were annealed and dried at 80 °C for 12 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFTest specimen preparation
Chemicals and environment (6)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFSolubility - Acid resistance: resistant
Resistant
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFResistance to Acid - Alkali resistance: resistant
Resistant
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - ASA-CFFlammability
QIDI ASA-CF20 CoreStrength XY, MPa50.1Strength Z, MPa31Modulus XY, GPa4.5Charpy notched, kJ/m²5.76HDT 0.45, °C101HDT 1.8, °C96Price, CAD/kg65Nozzle, °C250–280Bed, °C100–110Chamber, °CenclosedDrying, °C, h60–704–6 h
QIDI ASA-CF20 CoreQIDI
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| QIDI, Technical Data Sheet QIDI ASA-CF20 Core14 valuesThe same values also in QIDI, QIDI Filament Guide | Choose the Right Filament.Unless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 4502.58 ± 103.44 Mpap. 3: Tensile strength(X-Y) 拉伸模量(X-Y) ISO 527 Young’s modulus(X-Y) | ISO 527 | in the median |
| Tensile modulus Z | 2570.8 ± 130.85 MPap. 3: Tensile strength (Z) 拉伸模量(Z) ISO 527 Young’s modulus (Z) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 50.06 ± 1.0 Mpap. 3: 拉伸强度(X-Y) Tensile strength(X-Y) | no standard stated | in the median |
| Tensile strength (yield or break not stated) Z | 31.03 ± 2.18 MPap. 3: 拉伸强度 (Z) Tensile strength (Z) | no standard stated | in the median |
| Elongation at break XY | 1.64 ± 0.11 %p. 3: Young’s modulus(X-Y) 断裂伸长率(X-Y) Elongation at break (X-Y) | no standard stated | in the median |
| Elongation at break Z | 1.50 ± 0.14 %p. 3: Young’s modulus (Z) 断裂伸长率(Z) Elongation at break (Z) | no standard stated | in the median |
| Flexural modulus XY | 4537.67 ± 264.85 Mpap. 3: 弯曲模量 (X-Y) | ISO 178 | in the median |
| Flexural strength XY | 84.30 ± 1.37 Mpap. 3: Bending strength (X-Y) | ISO 178 | in the median |
| Charpy impact strength XY | 5.76 ± 0.17 KJ/㎡p. 3: 缺口冲击强度 (X-Y) ISO 179 Charpy impact strength (X-Y) | ISO 179notched | in the median |
| HDT at 0.45 MPa | 101.1 °Cp. 3: Determination of temperature ISO 75: Method B 拉伸强度(X-Y)also in QIDI, QIDI Filament Guide | Choose the Right Filament | ISO 75As the sheet prints it: 0.45MPa ISO 75 | in the median |
| HDT at 1.8 MPa | 95.8 °Cp. 3: Melt index 热变形温度 ISO 75: Method A Determination of temperature | ISO 75As the sheet prints it: 1.80MPa ISO 75 | in the median |
| Density | 1.06 g/cm³p. 3: 密度 ISO 1183 | specimen not stated, ISO 1183 | |
| Melt mass-flow rate | 4.3 g/10minp. 3: Density 熔融指数 250°C, 2.16kg Melt index | specimen not stated, no standard namedAs the sheet prints it: 250°C 2.16kg | |
| Fibre content | 20% chopped carbon fiberp. 2: Fibre content | specimen not stated, no standard stated | |
| QIDI, QIDI Filament Guide | Choose the Right Filament1 value | |||
| Water absorption | 0.39%p. 1: Saturated Water Absorption Rate | no standard statedafter moisture conditioningsaturation | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- optional: 60–70 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in QIDI, QIDI Filament Guide | Choose the Right Filament; drying in QIDI, QIDI Filament Guide | Choose the Right Filament.
Its 2 print profiles, in the documents' words
- Nozzle 250-280°C; Bed 100-110°C; Drying If the filament has been opened for a long time and problems such as air bubbles and stringing appear during the printing process, please dry the filament at 60-70°C for 4-6 hours.QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 4: Recommended printing settings; p. 4: Drying note; p. 4: Nozzle Temperature; p. 4: Build plate temperature
- Nozzle 250-280°C; Bed Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C); Drying Required; Blast Drying Oven: 80°C / 4-6 hQIDI, QIDI Filament Guide | Choose the Right Filamentp. 1: Is drying highly recommended?; p. 1: Recommended hardware settings; p. 1: Bed Temperature & Type; p. 1: Extruder heat range
Price
65 CAD/kgits one regular price in the sample
1 listing
- QIDI Canada: 65 CAD/kgASA-CF20 Core / 1 Kg / Black HEX Code #3E4342 / CA (SKU ASA-CF20-BLK)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (19)
- Benefits
The co-extrusion skin-core technology has greatly increased fiber content while maintaining the toughness of the filament and thus improved the mechanical properties as well as heat resistance of printed parts.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 1 - Adhesion between layers
However, for QIDI 3D printing filaments, the interlayer adhesion in Z-axis comes from the adhesion between the resin of the outer shell and this can completely avoid the layer adhesion loss caused by the fibers added.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 1 - Adhesion between layers
With these advantages, the Z-axis interlayer adhesion of the parts printed with QIDI is further improved compared with those printed with pure resin filaments.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 1 - Good for
It is a good choice for outdoor application with its excellent aging resistance and weather resistance.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Benefits
Its aging resistance can be 10 times higher than that of traditional ABS filaments.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Benefits
QIDI ASA-CF20 Core can resist material degradation, aging and color fading which are caused by UV.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Surface finish
Meanwhile, there is no floating fiber on the surface of the printed part, and the surface presents a bright matte texture.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Adhesion between layers
This skin-core structure not only contributes to the low shrinkage, warpage resistance and excellent mechanical properties which ordinary fiber-reinforced materials have, but stronger interlayer bonding performance for printed parts as well.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Adhesion between layers
It has fixed the defect that the ordinary fiber-reinforced material will lose the bonding strength between layers.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Nozzle wear
At the same time, the skin-core structured filament can also help to avoid contact between the reinforcing fibers of the filament and extruders or throats, which prolongs the service life of the entire extrusion parts of the 3D printer.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Nozzle wear
During the extrusion process, the QIDI can greatly reduce the wear of the nozzle.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 2 - Warping and shrinkage
This technology further improves the warping resistance and rigidity of ASA materials, so the chamber temperature can be properly reduced to achieve energy saving.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 4 - Moisture sensitivity
If the filament has been opened for a long time and problems such as air bubbles and stringing appear during the printing process, please dry the filament at 60-70°C for 4-6 hours.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 4 - Odour and emissions
It is recommended to place the printer in a well-ventilated environment when printing with ASA material.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 4 - Supports and removal
QIDI S-Multi Quick-Remove Support Material
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 4 - Surface finish
when the printing speed is too high, the melt flow state will become unstable, and the filaments extruded from the nozzle will no longer have the skin-core structure anymore, which can cause the rough surface of the printed part.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 5 - Nozzle wear
It is recommended to use hardened steel nozzles or nozzles with greater abrasion resistance, which can effectively improve the printing quality.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 5 - Printing advice
When this phenomenon occurs, it is recommended to increase the printing temperature or reduce the extrusion speed.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 5 - Printing advice
The thickness of the heating block is recommended to be no less than 12mm.
QIDI, Technical Data Sheet QIDI ASA-CF20 Corep. 5
Eryone ASA-CFStrength XY, MPa39.1Strength Z, MPa17Modulus XY, GPa1.93Charpy notched, kJ/m²—HDT 0.45, °C86HDT 1.8, °C—Price, CAD/kg40Nozzle, °C240–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h75–856 h
Eryone ASA-CFEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Eryone, Technical Data Sheet (TDS) ASA-CF12 valuesUnless a row says otherwise: printed specimenprint settingsprinting temperature=260 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | |||
| Tensile modulus XY | 1934.7 MPap. 2: Tensile modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile modulus Z (X-Z) | 1799.2 MPap. 2: Tensile modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile strength (yield or break not stated) XY | 39.1 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 17 ± 2 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843 | in the median |
| Elongation at break Z | 1.8 %p. 2: Elongation at breakX-Z 50mm/min GB/T 1040.2 % | GB/T 1040.2As the sheet prints it: 50mm/min GB/T 1040.2 | in the median |
| Flexural modulus orientation not stated | 2531.9 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Flexural strength orientation not stated | 60.1 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Charpy impact strength | 12.0 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1043.1-2008 kJ/m2 | GB/T 1043.1As the sheet prints it: 2.75J GB/T 1043.1-2008 | not in the median: notch not stated |
| HDT at 0.45 MPa | 86 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 108 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633print settings not stated | |
| Density | 1.17 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 1.74 ± 0.3 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 240–280 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureown data sheet
- Drying
- 75–85 °C for 6 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 240-280 ℃; Bed 90-110℃; Drying 75-85℃, 6hEryone, Technical Data Sheet (TDS) ASA-CFp. 1: Recommended printing settings; p. 1: Sealed printing; p. 1: Bed material
Price
40 CAD/kgits one regular price in the sample
1 listing
- ERYONE Canada: 40 CAD/kgASA & ASA-CF Filament - 1.75mm±0.03mm (1kg) / ASA-CF-Black (SKU B0171001)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (3)
- Good for
We can print some gardening tools, outdoor furniture, electronic product protective cases, etc.
Eryone, Technical Data Sheet (TDS) ASA-CFp. 1 - Warping and shrinkage
At the same time, it also reduces the impact of curled edges during the printing process, greatly improving the dimensional accuracy and stability of the model.
Eryone, Technical Data Sheet (TDS) ASA-CFp. 1 - Surface finish
The printed part has no traces and presents a matte texture, which is very beautiful.
Eryone, Technical Data Sheet (TDS) ASA-CFp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
Eryone ASA-CF is an outdoor high-performance filament with excellent resistance to cold weather and UV radiation.
UV / weatherEryone, Technical Data Sheet (TDS) ASA-CFp. 1
3DXTECH CarbonX CF ASAStrength XY, MPa48Strength Z, MPa—Modulus XY, GPa5.36Charpy notched, kJ/m²—HDT 0.45, °C97HDT 1.8, °C—Price, CAD/kg—Nozzle, °C235–255Bed, °C90–110Chamber, °C—Drying, °C, h804 h
3DXTECH CarbonX CF ASA3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber ASA 3D Printing Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted on an open-source FDM/FFF printer at a 0.4 mm nozzle, 0.25 mm layer height, 100% infill at +/- 45°, 250 °C extrusion and 110 °C bed, specimen orientation XY Flat (p. 1: Printed Specimen Conditions) | |||
| Tensile modulus XY | 5355 MPap. 1: Mechanical Properties, Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 48 MPap. 1: Mechanical Properties, Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 3 %p. 1: Mechanical Properties, Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 5210 MPap. 1: Mechanical Properties, Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 78 MPap. 1: Mechanical Properties, Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 97 °Cp. 1: Thermal Properties, Deflection Temperature at 0.45 MPa (66psi) | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66psi) | in the median |
| Glass transition temperature | 105 °Cp. 1: Thermal Properties, Glass Transition Temperature (Tg) | specimen not stated, DSCprint settings not stated | in the median |
| Density | 1.11 g/ccp. 1: Physical Properties, Density | specimen not stated, ISO 1183print settings not stated | |
| 3DXTECH, Safety Data Sheet: CarbonX™ CF-ASA1 value | |||
| Fibre content | <15 %p. 1: Carbon Fiber | no standard stated | |
Print settings
- Nozzle
- 235–255 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- recommendedown data sheet
- Drying
- 80 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 235-255C; Bed 90-110C; Chamber Recommended; Drying 80C for 4 hours3DXTECH, CARBONX™ ASA+CFp. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 117 per kg, sale priceBlack - 1.75mm 3DXTech CarbonX™ CF ASA Filament - 0.75 kg (SKU ASA3010750BK0)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (1)
- Good for
ASA is UV-stable and suitable for outside use
3DXTECH, CARBONX™ ASA+CFp. 1
Chemicals and environment (3)
- Safety: described in words
Local exhaust is preferred. Product as shipped is not a combustible dust; mechanical handling can cause the formation of dusts.
Processing ventilation3DXTECH, Safety Data Sheet: CarbonX™ CF-ASAp. 2: sections 7 and 8, Handling and storage conditions, Ventilation - Flammability: described in words
Thermal decomposition can yield intense heat, dense smoke, phenols, hydrogen cyanide, carbon dioxide, and carbon monoxide.
3DXTECH, Safety Data Sheet: CarbonX™ CF-ASAp. 3: section 10, Hazardous decomposition byproducts - Disposal and circularity: described in words
Waste or unused product may be discarded in accordance with state, federal, and local regulations.
3DXTECH, Safety Data Sheet: CarbonX™ CF-ASAp. 3: section 13, Disposal
3DJake ASA CFStrength XY, MPa62Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²9HDT 0.45, °C—HDT 1.8, °C93Price, CAD/kg—Nozzle, °C240–260Bed, °C110Chamber, °CenclosedDrying, °C, h808 h
3DJake ASA CF3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE ASA CF11 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 62 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 8 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3100 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 93 MPap. 1: Flexural strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 9 kJ/m²p. 1: Notched impact strength (Charpy, 23 °C) | ISO 179As the sheet prints it: Charpy 23 °C ISO 179/1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 9,5 kJ/m²p. 1: Notched impact strength (Izod, 23 °C) | ISO 180As the sheet prints it: Izod 23 °C ISO 180/1A | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 93 °Cp. 1: HDT (1,8 MPa, flatwise) | ISO 75As the sheet prints it: 1,8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 101 °Cp. 1: Vicat (50 N, 50 °C/h) | ISO 306As the sheet prints it: 50 N ISO 306 | |
| Density | 1,12 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1/A | |
| Melt mass-flow rate | 16 g/10 minp. 1: MFR (220 °C / 10 kg) | ISO 1133As the sheet prints it: 220 °C / 10 kg ISO 1133 | |
| Mould shrinkage orientation not stated | 0,3 %p. 1: Shrinkage (3,2 mm) | ISO 294As the sheet prints it: 3 2 mm ISO 294-4 | |
| 3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 g1 value | |||
| Fibre content | 12% carbon fibrep. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 110 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- optional: 80 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 240 – 260 °C; Bed 110 °C3DJake, Technical Data Sheet 3DJAKE ASA CFp. 1: Recommended printing settings; p. 1: Heated bed
- Nozzle 240 - 260 °C; Bed 110 °C3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1: Recommended processing temperature; p. 1: Recommended heating temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (13)
- Warping and shrinkage
Optimised layer adhesion and process stability with low warping tendency
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Benefits
UV & weather resistant
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Benefits
High stiffness & strength
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Benefits
Very good heat resistance
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Good for
3DJake ASA CF is a carbon fibre-reinforced ASA filament developed specifically for industrial applications.
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Good for
Its excellent UV and weather resistance make it perfectly suited for outdoor use, while the carbon fibres provide significantly increased rigidity and strength.
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Adhesion between layers
The material offers outstanding process reliability: optimised flow characteristics, consistent layer adhesion, and enhanced thermal stability ensure clean print results with minimal deformation.
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Surface finish
Its matte surface finish gives printed parts a professional, technical appearance.
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Good for
Composite reinforced with 12% carbon fibre for high-strength applications
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Good for
UV- and weather-resistant – ideal for outdoor use
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Good for
High rigidity and strength for mechanically stressed components
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Benefits
Excellent heat deflection resistance
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1 - Surface finish
Matt, technical surface for a professional finish
3DJake, 3DJAKE ASA CF Black, 1.75 mm / 1000 gp. 1
Flashforge ASACF10Strength XY, MPa39Strength Z, MPa—Modulus XY, GPa0.85Charpy notched, kJ/m²10.5IzodHDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C100–120Chamber, °C25–60Drying, °C, h80≥ 5 h
Flashforge ASACF10Flashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet ASACF10 Filament11 values | |||
| Tensile modulus XY | 850-900 Mpap. 1: Modulus of Elasticity(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 39-42 Mpap. 1: Tensile Strength(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 15.5-17.5 %p. 1: Elongation at Break(X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 80-82.5 Mpap. 1: Bending Strength(X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Izod impact strength XY | 10.5-12 KJ/m2p. 1: Izod Impact Strength(X-Y) ISO 180 KJ/m2 | ISO 180notchedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 270 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| HDT at 0.45 MPa | 88 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 85 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.09-1.10 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.5 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 4-7 g/10minp. 1: Melt Index MFR (220℃/5Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 220℃/5Kg ISO 1133 | |
| Fibre content | 10% carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- 25–60 °Cown data sheet
- Drying
- 80 °C for ≥ 5 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 250~280℃ (270℃ recommended); Bed 100~120℃ (110℃ recommended); Chamber Room temperature~60℃; Drying Using a hot dry air oven at 80℃ for at least 5 hours is recommendedFlashforge, Technical Data Sheet ASACF10 Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
Dimensional stability/High rigidity/Weather resistance
Flashforge, Technical Data Sheet ASACF10 Filamentp. 1 - Moisture sensitivity
As the ASACF10 filament absorbs moisture easily due to the added carbon fiber, it should be dried before being used.
Flashforge, Technical Data Sheet ASACF10 Filamentp. 3 - Printing advice
After the printing process, it is recommended to dry the model in the oven at 80°C for 1-3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet ASACF10 Filamentp. 3
Chemicals and environment (1)
- Post-processing: described in words
After the printing process, it is recommended to dry the model in the oven at 80°C for 1-3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet ASACF10 Filamentp. 3: Post-processing note
SIDDAMENT ASA Carbon FiberStrength XY, MPa53Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²65IzodHDT 0.45, °C96HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C80–100Chamber, °CenclosedDrying, °C, h802–4 h
SIDDAMENT ASA Carbon FiberSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, ASA Carbon Fiber - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 53 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 18 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2056 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 71 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 65 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 96 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), no stated test load |
| Density | 1.08 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.4 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureown data sheet
- Drying
- optional: 80 °C for 2–4 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 250-270°C; Bed 80-100°C; Drying If damp, dry at 80°C for 2-4 hours.SIDDAMENT, ASA Carbon Fiber - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, ASA Carbon Fiber - Technical Datasheetp. 2
Fillamentum ASA CF10 CarbonStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa2.8Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–290Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h
Fillamentum ASA CF10 CarbonFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, ASA CF10 Carbon11 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2800 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 45 MPap. 1: Tensile strength at yield | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 38 MPap. 1: Tensile strength at break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 10 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 23 kJ/m2p. 1: Charpy impact strength | ISO 179unnotched | not in the median: unnotched |
| Hardness | 74 Shore Dp. 1: Hardness | ISO 7619 | in the median |
| Glass transition temperature | 65 °Cphysically implausiblep. 1: Glass transition temperature | ISO 11357 | not in the median: physically implausible as published |
| Vicat softening temperature | 90 °Cp. 1: Vicat softening temperature | ISO 306 | |
| Melting temperature | 135 °Cp. 1: Melting temperature | ISO 11357 | |
| Density | 1.04 g/cm3p. 1: Material density | ISO 1183 | |
| Fibre content | ASA CF10 %p. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 250–290 °CBambu Lab Filament Guide
- Bed
- 90–100 °CBambu Lab Filament Guide
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- optional: 80 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededBambu Lab Filament Guide
What the maker says (2)
- Benefits
Wear resistance
Fillamentum, ASA CF10 Carbonp. 1 - Surface finish
Matte finish
Fillamentum, ASA CF10 Carbonp. 1
Chemicals and environment (2)
- UV and outdoor: described in words
UV and weather resistance
UV / weatherFillamentum, ASA CF10 Carbonp. 1 - UV and outdoor: described in words
UV stability Yes
UVFillamentum, ASA CF10 Carbonp. 1
SIDDAMENT ASA CFStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–290Bed, °C90–100Chamber, °CenclosedDrying, °C, h80≥ 5 h
SIDDAMENT ASA CFSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, ASA CF Technical Data Sheet9 valuesUnless a row says otherwise: printed specimen (implied by the document) | |||
| Tensile strength (yield or break not stated) orientation not stated | 39-42 Mpap. 1: Tensile strength ISO 527 Mpa | ISO 527 | in the median |
| Elongation at break orientation not stated | 15.5~17.5 %p. 1: Elongation at break | ISO 527 | in the median |
| Flexural modulus orientation not stated | 850-900 Mpaphysically implausiblep. 1: Flexural Modulus ISO 527 Mpa | ISO 527 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 80-82.5 Mpap. 1: Flexural Strength ISO178 Mpa | ISO 178 | in the median |
| Izod impact strength orientation not stated | 10.5~12 KJ/m²p. 1: Impact Strength | ISO 180 | not in the median: notch not stated |
| Izod impact strength orientation not stated | 10.5~12 KJ/m² | ISO 180 | not in the median: notch not stated |
| Continuous service temperature | 85 ℃p. 1: Continuous Use Temperature | specimen not stated, IEC 60216 | |
| Density | 1.09~1.10 g/cm3p. 1: Density | specimen not stated, ISO 1183 | |
| Melt mass-flow rate | 4-7 g/10minp. 1: MFR(250°C/2.16Kg) ISO 1133 g/10min | specimen not stated, ISO 1133As the sheet prints it: 250°C/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 250–290 °CBambu Lab Filament Guide
- Bed
- 90–100 °CBambu Lab Filament Guide
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- 80 °C for ≥ 5 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Drying It is recommended to dry the filament in a dryer at 80°C for at least 5 hoursSIDDAMENT, ASA CF Technical Data Sheetp. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Easy to print / dimensionally stable / high stiffness
SIDDAMENT, ASA CF Technical Data Sheetp. 1 - Benefits
It has excellent dimensional stability, flexural strength and rigidity
SIDDAMENT, ASA CF Technical Data Sheetp. 1
FormFutura ApolloX CF10Strength XY, MPa79Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5.4HDT 0.45, °C—HDT 1.8, °C95Price, CAD/kg120Nozzle, °C235–260Bed, °C90–110Chamber, °CnoneDrying, °C, hdry first
FormFutura ApolloX CF10FormFutura
Data sheet shared with Spectrum ASA-X CF10: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet ApolloX CF106 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 79 MPap. 1: Tensile strength (23°C, 50mm/min) | ISO 527As the sheet prints it: 23°C 50mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 8 ft.lb/in2p. 1: Charpy unnotched impact strength, 23°C | ISO 179As the sheet prints it: ISO 179/1eU | not in the median: unnotched |
| Charpy impact strength orientation not stated | 2.57 ft.lb/in2p. 1: Charpy notched impact strength, 23°C | ISO 179As the sheet prints it: ISO 179/1eU | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 95 °Cp. 1: Heat deflection temperature (HDT) @ 264psi | ISO 75As the sheet prints it: HDT 264psi ISO 75 | in the median |
| Vicat softening temperature | 101.6 °Cp. 1: VICAT softening point | ISO 306 | |
| Density | 1.1 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 235–260 °CSpectrum ASA-X CF10's data sheet, shared
- Bed
- 90–110 °CSpectrum ASA-X CF10's data sheet, shared
- Heated chamber
- not requiredown data sheet
- Drying
- required, schedule not statedown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Drying it is recommended to dry the material prior to usageFormFutura, Technical Data Sheet ApolloX CF10p. 1: Enclosure note; p. 2: Nozzle note
Price
120 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 120 CAD/kgFormFutura ApolloX CF10 - 500g 1.75mm (SKU FFTURA-AXCF-175BLCK-00500)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (16)
- Good for
This makes carbon fiber reinforced filaments perfect for 3D printing applications that require stiffness and lightweight properties.
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Good for
3D printing housings and covers
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Good for
Rigid parts for outdoor applications
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Good for
Civil engineering applications
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Good for
Aerospace and automotive
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Benefits
No enclosure, or heated chamber needed.
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Benefits
This engineering filament is very easy to 3D print on open desktop machines.
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Benefits
Easy to print on open desktop 3D printers
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Warping and shrinkage
Reducing shrinkage / warping
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Warping and shrinkage
Increasing dimensional stability
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Warping and shrinkage
Superior dimensional stability
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Surface finish
Masking layer lines with a matt surface finish in 3D printed objects
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Adhesion between layers
Its low shrinkage factor and perfect layer adhesion make ApolloX CF10 a breeze to print with.
FormFutura, Technical Data Sheet ApolloX CF10p. 1 - Nozzle wear
We recommend to use ruby nozzles or hardened steel nozzles.
FormFutura, Technical Data Sheet ApolloX CF10p. 2 - Nozzle wear
In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments.
FormFutura, Technical Data Sheet ApolloX CF10p. 2 - Nozzle wear
Please be aware that carbon fiber reinforced filaments contain a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature.
FormFutura, Technical Data Sheet ApolloX CF10p. 2
Chemicals and environment (1)
- UV and outdoor: described in words
UV- and weather resistant
UV / weatherFormFutura, Technical Data Sheet ApolloX CF10p. 1
Spectrum ASA-X CF10Strength XY, MPa79Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5.4HDT 0.45, °C—HDT 1.8, °C95Price, CAD/kg122Nozzle, °C235–260Bed, °C90–110Chamber, °CnoneDrying, °C, hdry first
Spectrum ASA-X CF10Spectrum
Data sheet shared with FormFutura ApolloX CF10: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET ASA-X CF1010 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus orientation not stated | 7580 MPap. 1: Elastic modulus tensile* | ISO 527 | not in the median: measured on a moulded bar |
| Tensile break strength orientation not stated | 79 MPap. 1: Tensile Strength at Break* | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 1,80 %p. 1: Tensile Elongation at Break* | ISO 527 | not in the median: measured on a moulded bar |
| Charpy impact strength | 8 ft.lb/in²p. 1: Charpy impact strength, unnotched* | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: measured on a moulded bar |
| Charpy impact strength | 2.57 ft.lb/in²p. 1: Charpy impact strength, notched* | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 100,5 °Cp. 1: Heat Deflection Temperature 66 psi* | ISO 75As the sheet prints it: 66 psi ISO 75 | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 95 °Cp. 1: Heat Deflection Temperature 264psi* | ISO 75As the sheet prints it: 264psi ISO 75 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 101,6 °Cp. 1: VICAT Softening point* | ISO 306 | |
| Density | 1.1 g/cm3p. 1: Specific Gravity | specimen not stated, ISO 1183 | |
| Fibre content | 10%p. 1: Fibre content | specimen not stated, no standard stated | |
Print settings
- Nozzle
- 235–260 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- required, schedule not statedFormFutura ApolloX CF10's data sheet, shared
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 235-260°C; Bed 90-110°CSpectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1: Recommended printing settings; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
- No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
122 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 122 CAD/kgBlack CF10 - Spectrum ASA-X Filament - 1.75mm, 0.5kg (SKU 67bbc4ca839b0)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (10)
- Benefits
printable on desktop printers without a heated chamber
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Benefits
It is resistant to external exposure, such as sunlight (UV) and humidity (hydrolysis).
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Warping and shrinkage
At the same time, Spectrum ASA-X CF10 has low shrinkage and is, unusually for technical materials with comparable properties, easy to print.
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Surface finish
carbon, matt printed surface
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Surface finish
All of this, combined with a carbon matt surface that effectively masks the layers.
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Adhesion between layers
perfect bonding of the layers
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Nozzle wear
Ruby or hardened nozzle recommended
Spectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - Benefits
10% Carbon fiber reinforced, improved thermal resistance, outdoor use in conditions of increased exposure to UV
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Benefits
10% Carbon fiber reinforced, improved thermal resistance, outdoor use in conditions of increased exposure to UV radiation & humidity
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3
Chemicals and environment (2)
- UV and outdoor: described in words
excellent resistance to outdoor exposure
UVSpectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1 - UV and outdoor: described in words
UV resistance
UVSpectrum, TECHNICAL DATA SHEET ASA-X CF10p. 1
Fabru ASA CF10Strength XY, MPa84Strength Z, MPa—Modulus XY, GPa6.43Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C90–110Chamber, °CenclosedDrying, °C, h802–4 h
Fabru ASA CF10Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Acrylonitrile Styrène Ester Acrylique Fibre de Carbone 10% (ASA CF10)8 valuesThe same values also in Fabru, Acrilonitrile stirene acrilico estere fibra di carbonio 10% (ASA CF10).Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 6430 Mpap. 1: Module de traction (ASTM D790) | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 84 Mpap. 1: Limite d'élasticité (ASTM D638) | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 9.19 %p. 1: Allongement à la rupture (ASTM D638) | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 9.19 %p. 1: Allongement de la limite d'élasticité (ASTM D638) | ASTM D638 | listed under other properties |
| HDT at 0.45 MPa | 130 °Cphysically implausiblep. 1: Température de déflexion 0,45 MPa (ASTM D648) | ASTM D648As the sheet prints it: ASTM D648; 0.45 MPa | not in the median: physically implausible as published |
| Density | 1.11 g/cm³p. 1: Masse volumique (ASTM D792) | ASTM D792 | |
| Melt mass-flow rate | 5.2 g/10minp. 1: MFR (ASTM D1238)also in Fabru, Acrilonitrile stirene acrilico estere fibra di carbonio 10% (ASA CF10) | ASTM D1238 | |
| Fibre content | 10%p. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 210–260 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- 80 °C for 2–4 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 210-260 ° C; Bed 90-110°CFabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1: Nozzle temperature; p. 1: Printing table temperature
- Nozzle 210-260 °C; Bed 90-110 °C; Drying 80 °C | 2-4 hFabru, Acrylonitrile Styrène Ester Acrylique Fibre de Carbone 10% (ASA CF10)p. 1: Température d'impression; p. 1: Température du lit chauffant; p. 1: Température de séchage / Temps de séchage
- Nozzle 210-260 °C; Bed 90-110 °CFabru, Acrilonitrile stirene acrilico estere fibra di carbonio 10% (ASA CF10)p. 1: Temperatura di stampa; p. 1: Temperatura del piano riscaldato
Price
Not in the price sample.
Its 4 documents
What the maker says (15)
- Warping and shrinkage
ASA CF10 is less prone to warping than other filaments, resulting in more precise and higher quality print results.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Warping and shrinkage
ASA CF10 is less prone to warping than other filaments, resulting in more precise and higher quality print results.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Benefits
The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Precision and tolerance
A state-of-the-art manufacturing process achieves very low manufacturing tolerances, which leads to impressive printing results for all FDM 3D printers.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Precision and tolerance
low diameter and roundness tolerances
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Benefits
easy to print
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Good for
This filament offers an excellent combination of strength, UV resistance and low weight, making it particularly suitable for outdoor applications and technical components.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Good for
ASA CF10 is extremely resistant to UV rays and weathering, making it ideal for outdoor use.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Benefits
The addition of 10% carbon fibers increases mechanical strength and rigidity, making printed parts more stable and durable.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Good for
Despite its high strength, ASA CF10 remains lightweight, making it interesting for applications where weight plays a crucial role.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Good for
This filament is perfect for demanding projects where durability, weather resistance and mechanical properties are of utmost importance.
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Benefits
Excellent weather resistance
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Benefits
resistant to UV rays
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Benefits
Increased mechanical strength and rigidity
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1 - Warping and shrinkage
Reduced warping
Fabru, purefil ASA CF10 schwarz 1kg 1.75mm Refillp. 1
Nobufil ASAx CFStrength XY, MPa26Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²2.6IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C270–290Bed, °C100–120Chamber, °CenclosedDrying, °C, h60–703–6 h
Nobufil ASAx CFNobufil
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nobufil, Technical Datasheet ASAx CF13 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 26 MPap. 1: Tensile strength, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strength (yield or break not stated) orientation not stated | 36 MPap. 1: Tensile strength, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 9 %p. 1: Elongation at break, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Elongation at break orientation not stated | 18 %p. 1: Elongation at break, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2900 MPap. 1: Flexural modulus | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 38 MPap. 1: Flexural strength | ISO 178 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 2,6 kJ/m²p. 1: Izod Impact strength notched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Izod impact strength orientation not stated | 7,1 kJ/m²p. 1: Izod Impact strength notched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 12 kJ/m²p. 1: Izod Impact strength unnotched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: unnotched |
| Izod impact strength orientation not stated | 33 kJ/m²p. 1: Izod Impact strength unnotched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 104 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Density | 1,07 g/cm³p. 1: Density | ISO 1183 | |
| Fibre content | 10% carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 270–290 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- 60–70 °C for 3–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 280°C ± 10; Bed 110°C ± 10; Drying Pre-dry material for 3-6 hours at 60 - 70°C (max.).Nobufil, Technical Datasheet ASAx CFp. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
Due to its longevity and good weather resistance ASA is ideal for printing parts for outdoor applications exposed to direct sunlight.
Nobufil, Technical Datasheet ASAx CFp. 1 - Nozzle wear
Nozzle hardened
Nobufil, Technical Datasheet ASAx CFp. 1
Spectrum THE FILAMENT ASA CFStrength XY, MPa66Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–270Bed, °C75–100Chamber, °CenclosedDrying, °C, h808 h
Spectrum THE FILAMENT ASA CFSpectrum
Data sheet shared with The Filament ASA CF: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CF8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 66 MPap. 1: Tensile Strength at Yield | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 59 MPap. 1: Tensile Strength at Break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 2 %p. 1: Tensile Elongation at Break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 5,7 kJ/m2p. 1: Impact strength - charpy method | ISO 179 | not in the median: notch not stated |
| HDT | 88 °Cp. 1: Heat Deflection Temperature | ASTM D648As the sheet prints it: D 648 | not in the median: set apart (never used to pass), no stated test load |
| Vicat softening temperature | 96 °Cp. 1: VICAT | ASTM D1525As the sheet prints it: D 1525 | |
| Density | 1.12 g/cm3p. 1: Specific Gravity | ISO 1183 | |
| Fibre content | 3% CFp. 1: Fibre content | no standard stated | |
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CF1 value | |||
| Charpy impact strength orientation not stated | 5,7 kJ/m2p. 1: Impact strength - charpy method | ISO 179 | not in the median: notch not stated |
Print settings
- Nozzle
- 230–270 °Cown data sheet
- Bed
- 75–100 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureown data sheet
- Drying
- optional: 80 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 230-270°C; Bed 75-100°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: Adhesive; p. 1: settings footnote
Price
Not in the price sample.
Its 3 documents
What the maker says (5)
- Benefits
3% CF for durability and flexibility; optimized formula; UV resistant
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Surface finish
Surface finish matte, carbon appearance
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: Yes
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Printing advice
Closed chamber for printing recommended for larger prints
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1
The Filament ASA CFStrength XY, MPa66Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–270Bed, °C75–100Chamber, °CenclosedDrying, °C, h808 h
The Filament ASA CFThe Filament
Data sheet shared with Spectrum THE FILAMENT ASA CF: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 230–270 °Cown data sheet
- Bed
- 75–100 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureown data sheet
- Drying
- optional: 80 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 230-270°C; Bed 75-100°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1: Nozzle temperature, Bed temperature, Closed chamber for printing, Ruby or hardened nozzle; p. 1: Dry box recommended; p. 1: * settings are based on a 0,4 mm nozzle.
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
3% CF for durability and flexibility; optimized formula; UV resistant
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Surface finish
Surface finish matte, carbon appearance
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: Yes
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1 - Printing advice
Closed chamber for printing recommended for larger prints
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA CFp. 1
Extrudr DURAPRO ASA CFStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C110Chamber, °CenclosedDrying, °C, h808 h
Extrudr DURAPRO ASA CFExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CF12 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 2500 MPap. 1: Tensile modulus (E-Modulus) ASTM D638 MPa | ASTM D638 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 49 MPap. 1: Tensile strength ASTM D638 MPa | ASTM D638 | not in the median: measured on a moulded bar |
| Flexural modulus | 4500 MPap. 1: Flexural modulus (E-Modulus) ASTM D790 MPa | ASTM D790 | not in the median: measured on a moulded bar |
| Flexural strength | 78 MPap. 1: Flexural strength ASTM D790 MPa | ASTM D790 | not in the median: measured on a moulded bar |
| Izod impact strength | held back: the sheet's unit or table layout is unclearheld backp. 1: Notched impact strength ASTM D256 kj/m² | ASTM D256tested at 23°C | not in the median: held back |
| Izod impact strength | held back: the sheet's unit or table layout is unclearheld backp. 1: Unnotched impact strength ASTM D256 kj/m² | ASTM D256tested at -30°C | not in the median: held back |
| Hardness | 105 Rockwell Rp. 1: Hardness Rockwell ASTM D785 R-Skala | ASTM D785 | listed under other properties |
| HDT at 0.45 MPa | 96 °Cp. 1: HDT/B ASTM D648 °C | ASTM D648As the sheet prints it: HDT B ASTM D648 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 101 °Cp. 1: VICAT A (VST) ASTM D1525 °C | ASTM D1525 | |
| Melting temperature | 210-250 °Cp. 1: Melting temperature ISO 3146-C °C | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.14 g/cm³p. 1: Density ASTM D792 g/cm³ | ASTM D792 | |
| Mould shrinkage orientation not stated | 0.3 %p. 1: Shrinking | specimen not stated, ASTM D955 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 110 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureown data sheet
- Drying
- optional: 80 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 240-260°C; Bed 110°CExtrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1: Recommended printing settings
- Nozzle 240-260°C; Bed 110°CExtrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1: Recommended printing settings
Price
Not in the price sample.
Its 3 documents
What the maker says (7)
- Good for
The material is reinforced with carbon fibres, making it ideal for mechanically highly stressed components.
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1 - Warping and shrinkage
Low warping
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1 - Surface finish
Matte surface
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1 - Adhesion between layers
DuraPro ASA CF is optimised for good layer adhesion, thermal stability, better flow properties and lower warping.
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1 - Nozzle wear
Note: Due to the abrasive nature of the carbon fibers, a hardened nozzle (e.g., hardened steel or ruby nozzle) is strongly recommended.
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1 - Nozzle wear
Hardened Nozzle yes
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1 - Printing advice
Additionally, a nozzle diameter of at least 0.6 mm should be used to prevent clogging and ensure smooth extrusion.
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
UV and weather resistant
UV / weatherExtrudr, TECHNICAL DATA SHEET DURAPRO ASA CFp. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.