ABS-ESD
11 products from 10 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
11 products
Key
- set apart: test bar not described as printed, or no stated load
- shared data sheet
- converted price
- not published
How the numbers are worked out
eSUN ABS-ESDStrength XY, MPa38Strength Z, MPa22Modulus XY, GPa—Izod notched, kJ/m²—HDT 0.45, °C96HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90Chamber, °C—Drying, °C, h85≥ 8 h
eSUN ABS-ESDeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, Technical Data Sheet ABS-ESD13 valuesUnless a row says otherwise: printed specimenprint settingsExtruder Temperature 270℃; Build Platform Temperature 90℃; Outer Layer Number 2; Top/ Bottom Layer Number 3; Infill Density 100%; Fan Speed 10-40%; Based on Bambu P1S 0.4 mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 38 ± 2 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 22 ± 5 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 4.8 ± 2.5 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 3.1 ± 1.5 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 2263 ± 100 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 1677 ± 64 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 63 ± 2.1 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 35.9 ± 3.0 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 19.29 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.1 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 96 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 0.97 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033print settings not stated | |
| Surface resistivity | 10^9 Ωp. 1: Surface Resistance DIN IEC 60093 | specimen not stated, IEC 60093print settings not stated | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 90 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 85 °C for ≥ 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260-280℃; Bed 90℃; Drying 85℃ > 8HeSUN, Technical Data Sheet ABS-ESDp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
it is suitable for areas that req uire electrostatic protection for precision electronic components, integrated circuits and their packages.
eSUN, Technical Data Sheet ABS-ESDp. 1 - Benefits
ABS-ESD is an antistatic modified material with excellent permanent antistatic effect, surface resistivity of 109Ω, easy to print and smooth surface.
eSUN, Technical Data Sheet ABS-ESDp. 1 - Warping and shrinkage
Low warpage
eSUN, Technical Data Sheet ABS-ESDp. 1 - Surface finish
Smooth Print Surface
eSUN, Technical Data Sheet ABS-ESDp. 1
3DXTECH 3DXSTAT ESD ABSStrength XY, MPa58Strength Z, MPa—Modulus XY, GPa2.13Izod notched, kJ/m²—HDT 0.45, °C97HDT 1.8, °C—Price, CAD/kg199Nozzle, °C220–240Bed, °C100–110Chamber, °C—Drying, °C, h804 h
3DXTECH 3DXSTAT ESD ABS3DXTECH
Data sheet shared with MatterHackers ESD-Safe ABS: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, 3DXSTAT ESD ABS8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 230°C Bed Temp: 110°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 2130 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 58 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 4 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 2275 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 80 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 97 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Glass transition temperature | 105 °Cp. 1: Glass Transition Temperature (Tg) | DSC | in the median |
| Density | 1.09 g/ccp. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- No temperature stated3DXTECH, 3DXSTAT ESD ABSRecommended printing settings
- Nozzle 220-240°C; Bed 100-110°C; Chamber Recommended; Drying 80°C for 4 hours3DXTECH, 3DXSTAT™ ESD-ABSPrint Recommendations
- Nozzle 220-240°C; Bed 100-110°C; Chamber Recommended; Drying 80°C for 4 hours3DXTECH, 3DXSTAT™ ESD-ABSp. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
199 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- 3D Printing Canada: 200 per kg, sale priceBlack - 1.75mm 3DXTech 3DXSTAT® ESD ABS Filament - 0.75 kg (SKU ABS2010750BK0)not used: no regular price per kilogram recorded; seen 30 Sep 2026
- 3DXTECH: 199 CAD/kg3DXSTAT™ ESD-ABS / Black / 1.75mm / 750g (SKU ABS02ES200750BK00)in its price; 3DXTECH (USD storefront) lists 105 USD for 0.75 kg: 140 USD/kg before VAT, × 1.4188 CAD per USD (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 4 documents
What the maker says (6)
- Printing advice
Easier to print than most industrial-grade materials
3DXTECH, 3DXSTAT™ ESD-ABSp. 1 - Benefits
Durable and sturdy parts off practically every machine on the market
3DXTECH, 3DXSTAT™ ESD-ABSp. 1 - Benefits
Higher melting point and thermal properties than PLA or PETG
3DXTECH, 3DXSTAT™ ESD-ABSp. 1 - Good for
Ideal for prototyping or end-use parts among both industry engineers and hobbyists alike
3DXTECH, 3DXSTAT™ ESD-ABSp. 1 - Good for
3DXSTAT ESD ABS is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection and a high level of cleanliness.
3DXTECH, 3DXSTAT™ ESD-ABSp. 1 - Benefits
Manufactured with consistency in mind, 3DXTECH starts with premium ABS and then compounds it according to a proprietary formulation of multi-wall carbon nanotubes – giving you a filament with excellent printing characteristics and consistent ESD properties.
3DXTECH, 3DXSTAT™ ESD-ABSp. 1
3DXTECH TriStat ESD-ABS Model MaterialStrength XY, MPa36Strength Z, MPa—Modulus XY, GPa2.27Izod notched, kJ/m²—HDT 0.45, °C98HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C100–110Chamber, °C—Drying, °C, h804 h
3DXTECH TriStat ESD-ABS Model Material3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DXTECH, Technical Data Sheet: TriStat™ ESD-ABS Model Material8 values | |||
| Tensile modulus XY | 2275 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 36 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 3.5 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 2430 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 62 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 98 °Cp. 1: Deflection Temperature at 0.45 MPa (66psi) | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| Glass transition temperature | 104 °Cp. 1: Glass Transition Temperature DSC °C | no standard stated | in the median |
| Density | 1.07 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- recommendedown data sheet
- Drying
- 80 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 220-240C; Bed 100-110C; Chamber Recommended; Drying 80C for 4 hours3DXTECH, TRITON3D™ ESD-ABS - Stratasys® Compatiblep. 1: Print Recommendations
Price
Not in the price sample.
Its 3 documents
MatterHackers ESD-Safe ABSStrength XY, MPa58Strength Z, MPa—Modulus XY, GPa2.13Izod notched, kJ/m²—HDT 0.45, °C97HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C100–110Chamber, °C—Drying, °C, h804 h
MatterHackers ESD-Safe ABSMatterHackers
Data sheet shared with 3DXTECH 3DXSTAT ESD ABS: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - PRO Series ESD-Safe ABS9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2130 MPap. 1: Tensile Modulus: | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 58 MPap. 1: Tensile Strength (Break): | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 4 %p. 1: Tensile Elongation (Break): | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2275 MPap. 1: Flexural Modulus: | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 80 MPap. 1: Flexural Strength: | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 97 °Cp. 1: Heat Deflection Temp (0.45 MPa): | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 105 °Cp. 1: Glass Transition Temperature (Tg): | no standard stated | in the median |
| Density | 1.09 g/ccp. 1: Density: | ISO 1183 | |
| Surface resistivity | 10^7-10^9 Ωp. 1: Surface Resistance: 10^ | ASTM D257As the sheet prints it: 10^ ASTM D257 | |
Print settings
- Nozzle
- 220–240 °C3DXTECH 3DXSTAT ESD ABS's data sheet, shared
- Bed
- 100–110 °C3DXTECH 3DXSTAT ESD ABS's data sheet, shared
- Heated chamber
- not stated
- Drying
- 80 °C for 4 h3DXTECH 3DXSTAT ESD ABS's data sheet, shared
- Hardened nozzle
- not needed3DXTECH 3DXSTAT ESD ABS's data sheet, shared
Price
Not in the price sample.
Its document
Flashforge ESD ABSStrength XY, MPa35Strength Z, MPa—Modulus XY, GPa1.3Izod notched, kJ/m²6HDT 0.45, °C98HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C100–120Chamber, °C25–40Drying, °C, h70≥ 5 h
Flashforge ESD ABSFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet ESD ABS Filament10 values | |||
| Tensile modulus XY | 1300-1500 Mpap. 1: Modulus of Elasticity(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 35-37 Mpap. 1: Tensile Strength(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 5-7 %p. 1: Elongation at Break(X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 60-61 Mpap. 1: Bending Strength(X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Izod impact strength XY | 6-7 KJ/m2p. 1: Izod Impact Strength(X-Y) ISO 180 KJ/m2 | ISO 180notchedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| HDT at 0.45 MPa | 98 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 80 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.08-1.1 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 1 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 8-12 g/10minp. 1: Melt Index MFR (220℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 220℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- 70 °C for ≥ 5 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220~240℃ (230℃ recommended); Bed 100~120℃ (110℃ recommended); Chamber Room temperature~40℃; Drying Using a hot dry air oven at 70℃ for at least 5 hours is recommendedFlashforge, Technical Data Sheet ESD ABS Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
It is an ideal filament for applications in automotive, aerospace, semiconductor industry, electronic and electrical industries.
Flashforge, Technical Data Sheet ESD ABS Filamentp. 1 - Benefits
ESD ABS, like ABS, has good heat resistance, high tenacity and impact resistance, and good antistatic performance as well.
Flashforge, Technical Data Sheet ESD ABS Filamentp. 1 - Supports and removal
Recommended Support Material Self-supporting, HIPS
Flashforge, Technical Data Sheet ESD ABS Filamentp. 2 - Moisture sensitivity
As the ESD ABS filament absorbs moisture easily, it should be dried before being used.
Flashforge, Technical Data Sheet ESD ABS Filamentp. 3
iSANMATE ESD ABSStrength XY, MPa34Strength Z, MPa19.4Modulus XY, GPa2.35Izod notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
iSANMATE ESD ABSiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, ESD ABS12 values | |||
| Tensile modulus XY | 2352.06±30.47 MPap. 1: Tensile Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 19.38±0.16 MPap. 1: Tensile Strength(Z) | ISO 527, GB/T 1040 | in the median |
| Tensile break strength XY | 34.00±0.16 MPap. 1: Tensile Breaking Strength (X-Y) | ISO 527 | in the median |
| Elongation at break XY | 2.21±0.08 %p. 1: Elongation At Break(X-Y) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2337.91±20.62 MPap. 1: Flexural Modulus(X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 54.28±0.56 MPap. 1: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 6.47±0.6KJ/㎡p. 1: Impact Strength (Charpy) (X-Y) | ISO 179, GB/T 9341 | not in the median: notch not stated |
| HDT at 0.45 MPa | held back: the sheet's unit or table layout is unclearheld backp. 1: Heat Distortion Temperature, Method A (0.45 MPa) | ISO 75As the sheet prints it: ISO 75: Method A (0.45 MPa)annealed at a temperature its sheet does not state for a time its sheet does not stateAfter annealing | not in the median: held back |
| HDT at 1.8 MPa | held back: the sheet's unit or table layout is unclearheld backp. 1: Heat Distortion Temperature, Method B (1.80 MPa) | ISO 75As the sheet prints it: ISO 75: Method B (1.80 MPa)annealed at a temperature its sheet does not state for a time its sheet does not stateAfter annealing | not in the median: held back |
| Glass transition temperature | 80 °Cphysically implausiblep. 1: Glass Transition Temperature | ISO 11357 | not in the median: physically implausible as published |
| Density | 1.05 g/cm3p. 1: Density | ISO 1183, GB/T 1033 | |
| Melt mass-flow rate | 2 g/10min g/10 minp. 1: Melt Index | no standard namedAs the sheet prints it: 280 °C, 5 kg | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
- Annealing
- temperature not statedown data sheet
Its print profile, in the documents' words
- No temperature statediSANMATE, ESD ABSRecommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
Thanks to the material's excellent printability and static dissipation properties, ESD-ABS is suitable for general manufacturing and electronic industries.
iSANMATE, ESD ABSp. 1 - Odour and emissions
Thanks to this advanced production process, the residual amounts of solvents and monomers used in the production process in the final ABS product are extremely low, so the consumables are printed The process has low odor.
iSANMATE, ESD ABSp. 1
3D4Makers ABSESDStrength XY, MPa19.8Strength Z, MPa—Modulus XY, GPa1.12Izod notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C100Chamber, °C—Drying, °C, h802–4 h
3D4Makers ABSESD3D4Makers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, ABS-ESD Filament6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1,121 MPap. 1: Tensile Modulus | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 24.3 MPap. 1: Tensile Strength | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Tensile strain at strength orientation not stated | 3.1 %p. 1: Elongation at tensile strength | no standard stated | listed under other properties |
| Flexural modulus orientation not stated | 856 MPap. 1: Flexural Modulus | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 66.7 Shore Dp. 1: Shore D Hardness | no standard stated | in the median |
| Glass transition temperature | 107 °Cp. 1: Glass temperature tg | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| 3D4Makers, Technical Data Sheet 3D Printing Filament ABS ESD Filament4 values | |||
| Tensile break strength orientation not stated | 19.8 MPap. 1: Tensile Stress at Break | ISO 527 | in the median |
| Elongation at break orientation not stated | 6.4 %p. 1: Tensile Elongation at Break | ISO 178 | in the median |
| Glass transition temperature | 106 °Cp. 1: Glass transition temp. (Tg) | ISO 11357 | in the median |
| Density | 1.03 g/cm³p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 2–4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 250-270°C; Bed 100°C; Drying 2-4hours,80°C3D4Makers, Technical Data Sheet 3D Printing Filament ABS ESD Filamentp. 1: Recommended printing settings: NozzleTemperature; p. 1: Dryingrecommendations
- Nozzle 260°C (250-270 °C); Bed 100°C; Drying 80°C, 2-4 hours3D4Makers, ABS-ESD Filamentp. 1: Print Temperature; p. 1: Bed Temperature; p. 1: Drying Recommendations
Price
Not in the price sample.
Its 3 documents
What the maker says (7)
- Good for
The filament is ideal for industrial applications like housings / casings for connectors, sensors and measuring devices.
3D4Makers, ABS-ESD Filamentp. 1 - Good for
ABS ESD Filament has been designed for protection of electronic devices which are sensitive to electrostatic discharges.
3D4Makers, ABS-ESD Filamentp. 1 - Benefits
The material prevents the risk of damage to vulnerable electronic components due to its dissipative properties.
3D4Makers, ABS-ESD Filamentp. 1 - Benefits
Electrostatic Discharge Protection.
3D4Makers, ABS-ESD Filamentp. 1 - Benefits
High Impact Resistance.
3D4Makers, ABS-ESD Filamentp. 1 - Benefits
Low dust / powder attraction.
3D4Makers, ABS-ESD Filamentp. 1 - Moisture sensitivity
Drying Recommendations: 80°C, 2-4 hours
3D4Makers, ABS-ESD Filamentp. 1
Nanovia ABS ESDStrength XY, MPa22Strength Z, MPa—Modulus XY, GPa1.66Izod notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C88Price, CAD/kg—Nozzle, °C250–280Bed, °C100–110Chamber, °C90Drying, °C, h604 h
Nanovia ABS ESDNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia ABS ESD : Anti static discharge : Nanovia7 values | |||
| Tensile modulus XY | 1660 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile strength (yield or break not stated) XY | 22 MPap. 1: Ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile strain at strength XY | 2.4 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | listed under other properties |
| Hardness | 77 Shore Dp. 1: Hardness | no standard stated | in the median |
| HDT at 1.8 MPa | 88 °C at 1.8 MPap. 1: DTUL | no standard namedAs the sheet prints it: 1.8 MPa | in the median |
| Glass transition temperature | 100 °Cp. 1: Tg | no standard stated | in the median |
| Density | 1,10 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- 90 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 250 – 280 °C; Bed 100 – 110 °C; Chamber 90 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia ABS ESD : Anti static discharge : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal)
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
Its functional temperature of up to 100 °C makes it particularly suited for the protection of electronics that can heat up, such as mother boards.
Nanovia, Nanovia ABS ESD : Anti static discharge : Nanoviap. 1 - Good for
Ideal for housing and protecting hard drives as well as creation of electronic connectors.
Nanovia, Nanovia ABS ESD : Anti static discharge : Nanoviap. 1 - Benefits
Nanovia ABS ESD, with its conductive carbon enriched matrix, discharges static electricity generated by friction or by electrical components.
Nanovia, Nanovia ABS ESD : Anti static discharge : Nanoviap. 1 - Surface finish
To preserve the fillament’s ESD properties, pieces should not be covered using insulating paints.
Nanovia, Nanovia ABS ESD : Anti static discharge : Nanoviap. 1 - Odour and emissions
Whilst printing ABS produces a VOC derivative of styrene.
Nanovia, Nanovia ABS ESD : Anti static discharge : Nanoviap. 1
Fiberlogy ESD ABSStrength XY, MPa55Strength Z, MPa—Modulus XY, GPa2.1Izod notched, kJ/m²5HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg247Nozzle, °C250–265Bed, °C90–110Chamber, °C—Drying, °C, h604 h
Fiberlogy ESD ABSFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ESD ABS5 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 2100 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 55 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 5 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23℃ ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23℃ ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.05 g/cm3p. 1: Specific Density ISO 1183 g/cm3 | specimen not stated, ISO 1183 | |
| Fiberlogy, ABS ESD Filament1 value | |||
| Izod impact strength orientation not stated | 5 kJ/m²p. 1: Izod impact strength (notched) @ 23°C | ISO 180tested at 23°C | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 250–265 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 250°C - 265°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ESD ABSp. 1: Recommended printing settings
- Nozzle 250–265°C; Bed 90–110°C; Drying 60°C / 4 hoursFiberlogy, ABS ESD Filamentp. 1: Exact product printing block; nozzle, bed, plate, enclosure and drying source-specific guidance
Price
247 CAD/kgits one regular price in the sample
1 listing
- Texas Filament Supply: 247 CAD/kgESD - ABSin its price; Texas Filament Supply (USD storefront) lists 87 USD for 0.5 kg: 174 USD/kg before VAT, × 1.4188 CAD per USD (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 3 documents
What the maker says (1)
- Good for
Fiberlogy ABS ESD is a specialized filament designed to protect sensitive electronic components from electrostatic discharge (ESD).
Fiberlogy, ABS ESD Filamentp. 1
Chemicals and environment (1)
- Post-processing: described in words
The print can be machined, as well as glued, painted, or smoothed with solvent vapor.
Fiberlogy, ABS ESD Filamentp. 1: exact product paragraph, source text line 65
Prusa Research Buddy3D ABS-ESD VEStrength XY, MPa39.6Strength Z, MPa—Modulus XY, GPa3.1Izod notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–265Bed, °C90–105Chamber, °C—Drying, °C, h—
Prusa Research Buddy3D ABS-ESD VEPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Buddy3D Product card ABS-ESD VE7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3105 MPap. 1: Tensile modulus ISO 527 2 mm/min MPa | ISO 527As the sheet prints it: 2 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 39.6 MPap. 1: Tensile strength ISO 527 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3.84 %p. 1: Tensile elongation ISO 527 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3197 MPap. 1: Flexural modulus ISO 178 – MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 72.8 MPap. 1: Flexural strength ISO 178 – MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Decomposition temperature | 300 °Cp. 2: Decomposition of ABS ESD | no standard stated | |
| Surface resistivity | 10^7 Ωp. 1: Surface resistivity IEC 60093 – Ω | IEC 60093 | |
Print settings
- Nozzle
- 240–265 °Cown data sheet
- Bed
- 90–105 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240 – 265 °C; Bed 90 – 105 °CPrusa Research, Buddy3D Product card ABS-ESD VEp. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
It can dissipate electric charges due to it’s lower electrical resistivity.
Prusa Research, Buddy3D Product card ABS-ESD VEp. 1 - Benefits
Good mechanical strength, stiffness, and hardness Moderate impact resistance Good thermal stability
Prusa Research, Buddy3D Product card ABS-ESD VEp. 1
Nobufil ABSx ESDStrength XY, MPa28Strength Z, MPa—Modulus XY, GPa—Izod notched, kJ/m²4HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C90–110Chamber, °C—Drying, °C, h60–703–6 h
Nobufil ABSx ESDNobufil
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nobufil, Technical Datasheet ABSx ESD12 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 28 MPap. 1: Tensile strength, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strength (yield or break not stated) orientation not stated | 33 MPap. 1: Tensile strength, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 8 %p. 1: Elongation at break, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Elongation at break orientation not stated | 95 %p. 1: Elongation at break, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 1790 MPap. 1: Flexural modulus | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 57 MPap. 1: Flexural strength | ISO 178 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 4 kJ/m²p. 1: Izod Impact strength notched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Izod impact strength orientation not stated | 6,5 kJ/m²p. 1: Izod Impact strength notched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 24 kJ/m²p. 1: Izod Impact strength unnotched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: unnotched |
| HDT at 1.8 MPa | 70 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Density | 1,07 g/cm³p. 1: Density | ISO 1183 | |
| Surface resistivity | 10^7-10^9 Ωp. 1: Surface resistivity 10^ | no standard namedAs the sheet prints it: 10^ | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60–70 °C for 3–6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260°C ± 10; Bed 100°C ± 10; Drying Pre-dry material for 3-6 hours at 60 - 70°C (max.).Nobufil, Technical Datasheet ABSx ESDp. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Good for
ABSx ESD offers excellent electrostatic energy dissipation and was specifically developed to protect sensitive electronic components from electrostatic discharge.
Nobufil, Technical Datasheet ABSx ESDp. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.