ABS

55 products from 31 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
measured after annealing
from the Bambu Lab Filament Guide
Izod where no Charpy is published
sold as toughened
added filler or additive
shared data sheet
not published

How the numbers are worked out

Polymaker ABS MaxStrength XY, MPa35.7Strength Z, MPa25.4Modulus XY, GPa2.32Charpy notched, kJ/m²10.5HDT 0.45, °C118HDT 1.8, °C113Price, CAD/kg—Nozzle, °C270–300Bed, °C120Chamber, °C≥ 65Drying, °C, h706 h

Polymaker ABS MaxPolymaker

Published values

Property	As published	Conditions	On the Overview
Polymaker, POLYMAKER™ ABS-Max Technical Data Sheet18 values
Tensile modulus XY	2.32 ± 0.03 GPap. 1: Young’s modulus (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Tensile modulus Z	2.10 ± 0.01 GPap. 1: Young’s modulus (Z)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Tensile strength (yield or break not stated) XY	35.66 ± 0.58 MPap. 1: Tensile strength (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Tensile strength (yield or break not stated) Z	25.41 ± 0.36 MPap. 1: Tensile strength (Z)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Elongation at break XY	6.72 ± 0.34 %p. 1: Elongation at break (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Elongation at break Z	1.81 ± 0.15 %p. 1: Elongation at break (Z)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural modulus XY	2.50 ± 0.07 GPap. 1: Bending modulus (X-Y)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural modulus Z	2.21 ± 0.05 GPap. 1: Bending modulus (Z)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural strength XY	63.29 ± 1.19 MPap. 1: Bending strength (X-Y)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural strength Z	45.12 ± 0.89 MPap. 1: Bending strength (Z)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Charpy impact strength XY	8.01 ± 0.77 kJ/m2p. 1: Charpy impact strength (X-Y) ISO 179, GB/T 1043	ISO 179, GB/T 1043 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	not in the median: notch not stated
HDT at 0.45 MPa	118.1°Cp. 1: Heat deflection temp. (118.1°C)	ISO 75 As the sheet prints it: ISO 75; 0.45MPa	in the median
HDT at 1.8 MPa	113.1°Cp. 1: Heat deflection temp. (113.1°C)	ISO 75 As the sheet prints it: ISO 75; 1.8MPa	in the median
Glass transition temperature	126.3 °Cp. 1: Glass transition temp. DSC, 10°C/min	DSC	in the median
Vicat softening temperature	127.4 °Cp. 1: Vicat softening temp.	ISO 306, GB/T 1633
Decomposition temperature	433.0°Cp. 1: Decomposition temp.	TGA As the sheet prints it: TGA, 20°C/min; rate=20°C/min
Density	1.06 g/cm3p. 1: Density ISO1183, GB/T1033	ISO 1183, GB/T 1033 As the sheet prints it: 1183 ISO1183 GB/T1033
Melt mass-flow rate	6.6 g/10minp. 1: Melt index 210°C, 2.16 kg	no standard named As the sheet prints it: 210°C 2.16 kg tested at 210°C

Polymaker, Polymaker™ ABS Max3 valuesUnless a row says otherwise: specimen not stated
Tensile strength (yield or break not stated) orientation not stated	35.66 MPap. 1: tensile strength	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural strength orientation not stated	63.29 MPap. 1: flexural strength	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Impact strength, test unclear orientation not stated	29.37 kJ/m²p. 1: unnotched impact strength	no standard statedWhich test: probably Charpy	listed under other properties
Polymaker, Polymaker ABS Max official product page3 valuesUnless a row says otherwise: printed bar (its stated orientation says so)unnotched
Charpy impact strength XY	29.37 KJ/m²p. 1: Charpy, unnotched (XY)	ISO 179 As the sheet prints it: ISO 179; infill=100%	not in the median: unnotched
Charpy impact strength XY	10.51 KJ/m²p. 1: Charpy, notched	ISO 179 As the sheet prints it: ISO 179; infill=100%	in the median
Charpy impact strength Z	8.01 KJ/m²p. 1: Charpy, unnotched (Z)	ISO 179 As the sheet prints it: ISO 179; infill=100%	not in the median: unnotched

Print settings

Nozzle: 270–300 °Cown data sheet
Bed: 120 °Cown data sheet
Heated chamber: at least 65 °Cown data sheet
Drying: 70 °C for 6 hown data sheet
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 270-300°C; Bed 120°C; Chamber 65˚C+; Drying 70°C/6HPolymaker, POLYMAKER™ ABS-Max Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Chamber temperature; p. 1: Based on 0.4mm nozzle
Nozzle 270˚C - 300˚C; Bed 120˚C; Drying We recommend drying ABS Max at 70°C for 6 hours before printing, or whenever it has absorbed moisture.Polymaker, Polymaker ABS Max official product pagep. 1: Printing Requirements; p. 1: Does ABS Max require a hardened nozzle?; p. 1: Printing Requirements; p. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings
Nozzle 270?C - 300?C; Bed 120?CPolymaker, Polymaker™ ABS Maxp. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Does ABS Max require a hardened nozzle?; p. 1: Actively Heated Enclosure Required

Price

Not in the price sample.

Its 4 documents

What the maker says (4)

Printing adviceYes. ABS Max requires an actively heated chamber of 65°C or higher for best results.Polymaker, Polymaker™ ABS Maxp. 1
Good forIt is ideally suited for automotive components, industrial fixtures, and other applications exposed to elevated operating temperatures.Polymaker, Polymaker ABS Max official product pagep. 1: Description, uses
Pitfalls and limitationsImproved Creep Resistance Best-in-class creep resistance helps maintain dimensional accuracy and structural integrity under prolonged load and heat exposure, ensuring reliable long-term performance in demanding environments.Polymaker, Polymaker ABS Max official product pagep. 1: Description, creep claim
Moisture sensitivityStore in a cool, dry environment away from moisture and UV light. Use of a PolyBox™ or PolyDryer™ is strongly recommended during both storage and printing.Polymaker, Polymaker ABS Max official product pagep. 1: FAQ, storage

Chemicals and environment (5)

Acid resistance: resistantGoodEffect of weak acids · weakPolymaker, POLYMAKER™ ABS-Max Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak acids
Acid resistance: not resistantPoorEffect of strong acids · strongPolymaker, POLYMAKER™ ABS-Max Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong acids
Alkali resistance: resistantGoodEffect of weak alkalis · weakPolymaker, POLYMAKER™ ABS-Max Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis
Alkali resistance: limitedFairEffect of strong alkalis · strongPolymaker, POLYMAKER™ ABS-Max Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis
Oil and grease resistance: resistantGoodEffect of oils and greasePolymaker, POLYMAKER™ ABS-Max Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease

Polymaker ABS ProStrength XY, MPa34.9Strength Z, MPa21.9Modulus XY, GPa2.33Charpy notched, kJ/m²14.5HDT 0.45, °C106HDT 1.8, °C101Price, CAD/kg—Nozzle, °C270–290Bed, °C100–110Chamber, °C≥ 50Drying, °C, h706 h

Polymaker ABS ProPolymaker

Sold as toughened or impact-modified: "With enhanced heat resistance, strength, and impact resistance, ABS Pro is the ideal upgrade for demanding functional printing applications." (Polymaker, POLYMAKER™ ABS-Pro Technical Data Sheet, p. 1). The maker's statement, not a test result.

Published values

Property	As published	Conditions	On the Overview
Polymaker, POLYMAKER™ ABS-Pro Technical Data Sheet21 values
Tensile modulus XY	2.33 ± 0.03 GPap. 1: Young’s modulus (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Tensile modulus Z	1.95 ± 0.02 GPap. 1: Young’s modulus (Z)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Tensile strength (yield or break not stated) XY	34.94 ± 0.62 MPap. 1: Tensile strength (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Tensile strength (yield or break not stated) Z	21.87 ± 0.32 MPap. 1: Tensile strength (Z)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Elongation at break XY	7.34 ± 1.13 %p. 1: Elongation at break (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Elongation at break Z	1.54 ± 0.13 %p. 1: Elongation at break (Z)	ISO 527, GB/T 1040 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural modulus XY	2.33 ± 0.05 GPap. 1: Bending modulus (X-Y)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural modulus Z	2.17 ± 0.01 GPap. 1: Bending modulus (Z)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural strength XY	60.05 ± 0.46 MPap. 1: Bending strength (X-Y)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Flexural strength Z	41.24 ± 2.14 MPap. 1: Bending strength (Z)	ISO 178, GB/T 9341 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	in the median
Charpy impact strength XY	8.87 ± 1.14 kJ/m2physically implausiblep. 1: Charpy impact strength (X-Y) ISO 179, GB/T 1043	ISO 179, GB/T 1043 print settings Printing temperature 240°C; Infill 100%; Bed temperature 80°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature Ambient	not in the median: physically implausible as published
Charpy impact strength XY	14.48±0.96 kJ/m²p. 1: Charpy impact strength (X-Y) notched	ISO 179, GB/T 1043	not in the median: sold as toughened, set apart
Charpy impact strength Z	39.58±12.45 kJ/m²physically implausiblep. 1: Charpy impact strength (Z)	ISO 179, GB/T 1043	not in the median: physically implausible as published
HDT at 0.45 MPa	106.4°Cp. 1: Heat deflection temp. (106.4°C)	ISO 75 As the sheet prints it: ISO 75; 0.45 MPa	in the median
HDT at 1.8 MPa	101.4°Cp. 1: Heat deflection temp. (101.4°C)	ISO 75 As the sheet prints it: ISO 75; 1.8 MPa	in the median
Glass transition temperature	114.9 °Cp. 1: Glass transition temp. DSC, 10°C/min	DSC	in the median
Vicat softening temperature	116.1 °Cp. 1: Vicat softening temp.	no standard stated
Decomposition temperature	436.4°Cp. 1: Decomposition temp.	TGA As the sheet prints it: TGA, 20°C/min; rate=20°C/min
Density	1.04 g/cm3p. 1: Density ISO1183, GB/T1033	ISO 1183, GB/T 1033 As the sheet prints it: 1183 ISO1183 GB/T1033
Water absorption	0.51%p. 1: Max Water Absorption Rate	no standard named As the sheet prints it: humidity=70% RH tested at 23°C
Melt mass-flow rate	11.1 g/10minp. 1: Melt index 210°C, 2.16 kg	no standard named As the sheet prints it: 210°C 2.16 kg tested at 210°C

Polymaker, Polymaker ABS Pro official product page2 valuesUnless a row says otherwise: printed bar (its stated orientation says so)unnotched
Charpy impact strength XY	30.48 KJ/m²p. 1: Charpy, unnotched (XY)	ISO 179 As the sheet prints it: ISO 179; infill=100%	not in the median: unnotched
Charpy impact strength Z	6.13 KJ/m²p. 1: Charpy, unnotched (Z)	ISO 179 As the sheet prints it: ISO 179; infill=100%	not in the median: unnotched

Print settings

Nozzle: 270–290 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: at least 50 °Cown data sheet
Drying: 70 °C for 6 hown data sheet
Hardened nozzle: not neededown data sheet

Its 2 print profiles, in the documents' words

Nozzle 270-290°C; Bed 100-110°C; Drying 70°C/6HPolymaker, POLYMAKER™ ABS-Pro Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
Nozzle 270˚C - 290˚C; Bed 100˚C - 110˚C; Chamber 50°C+; Drying We recommend drying ABS Pro at 70°C for 6 hours before printing, or whenever it has absorbed moisture.Polymaker, Polymaker ABS Pro official product pagep. 1: FAQ Do I need an enclosure to print ABS Pro?; Printing Requirements, enclosure; p. 1: Does ABS Pro require a hardened nozzle?; p. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings; p. 1: Printing Requirements

Price

Not in the price sample.

Its 3 documents

What the maker says (5)

BenefitsWith enhanced heat resistance, strength, and impact resistance, ABS Pro is the ideal upgrade for demanding functional printing applications.Polymaker, POLYMAKER™ ABS-Pro Technical Data Sheetp. 1
Good forIt is well suited for functional prototypes, end-use enclosures, brackets, clips, jigs, and custom printer components where standard ABS may fall short.Polymaker, Polymaker ABS Pro official product pagep. 1: Description, uses
Pitfalls and limitationsReliable Under Load Improved creep resistance helps ABS Pro resist gradual deformation under sustained mechanical stress, providing dependable long-term performance in structural and mechanically demanding applications.Polymaker, Polymaker ABS Pro official product pagep. 1: Description, creep
Printing adviceYes. ABS Pro requires an enclosed chamber of 50°C or higher for best results.Polymaker, Polymaker ABS Pro official product pagep. 1: FAQ, enclosure
Pitfalls and limitationsUnfortunately, we do not have data confirming that this material is food safe.Polymaker, Polymaker ABS Pro official product pagep. 1: FAQ, food-contact evidence

Chemicals and environment (5)

Acid resistance: resistantGoodEffect of weak acids · weakPolymaker, POLYMAKER™ ABS-Pro Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak acids
Acid resistance: not resistantPoorEffect of strong acids · strongPolymaker, POLYMAKER™ ABS-Pro Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong acids
Alkali resistance: resistantGoodEffect of weak alkalis · weakPolymaker, POLYMAKER™ ABS-Pro Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis
Alkali resistance: limitedFairEffect of strong alkalis · strongPolymaker, POLYMAKER™ ABS-Pro Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis
Oil and grease resistance: resistantGoodEffect of oils and greasePolymaker, POLYMAKER™ ABS-Pro Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease

Bambu Lab ABSStrength XY, MPa33Strength Z, MPa28Modulus XY, GPa2.2Charpy notched, kJ/m²21.5HDT 0.45, °C87HDT 1.8, °C84Price, CAD/kg26Nozzle, °C240–270Bed, °C80–100Chamber, °C45–60Drying, °C, h808 h

Bambu Lab ABSBambu Lab

Data sheet shared with Kingroon ABS: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Bambu Lab, Bambu Filament Technical Data Sheet - ABS20 valuesUnless a row says otherwise: printed specimen dry Dried before testing (see preparation) annealed at 80 °C for 12 h All the specimens were annealed and dried at 80 °C for 12 h before testing print settings Specimen Printing Conditions Subjects Data Nozzle Temperature 260 °C Bed Temperature 80 °C Printing Speed 200 mm/s Infill Density 100% *All the specimens were annealed and dried at 80 °C for 12 h before testing. And the suggested annealing temperature of models printed with Bambu ABS is 80 to 90 °C, and the time is 6 to 12 hours. The annealing effect depends on the annealing
Tensile modulus XY	2200 ± 190 MPap. 2: Young's Modulus (X-Y)	ISO 527, GB/T 1040	in the median
Tensile modulus Z	1960 ± 110 MPAp. 2: Young's Modulus (Z)	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	33 ± 3 MPap. 2: Tensile Strength (X-Y)	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	28 ± 2 MPap. 2: Tensile Strength (Z)	ISO 527, GB/T 1040	in the median
Elongation at break XY	10.5 ± 1.0 %p. 2: Breaking Elongation Rate (X-Y)	ISO 527, GB/T 1040	in the median
Elongation at break Z	4.7 ± 0.8 %p. 2: Breaking Elongation Rate (Z)	ISO 527, GB/T 1040	in the median
Flexural modulus XY	1880 ± 110 MPap. 2: Bending Modulus (X-Y)	ISO 178, GB/T 9341	in the median
Flexural modulus Z	1590 ± 100 MPap. 2: Bending Modulus (Z)	ISO 178, GB/T 9341	in the median
Flexural strength XY	62 ± 4 MPap. 2: Bending Strength (X-Y)	ISO 178, GB/T 9341	in the median
Flexural strength Z	39 ± 4 MPap. 2: Bending Strength (Z)	ISO 178, GB/T 9341	in the median
Charpy impact strength XY	39.3 ± 3.6 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched	ISO 179, GB/T 1043	not in the median: unnotched
Charpy impact strength XY	21.5 ± 2.2 kJ/m²p. 2: Impact Strength (X-Y) — notched	ISO 179, GB/T 1043	in the median
Charpy impact strength Z	7.4 ± 1.2 kJ/m²p. 2: Impact Strength (Z)	ISO 179, GB/T 1043	not in the median: notch not stated
HDT at 0.45 MPa	87 °Cp. 2: Heat Deflection Temperature	ISO 75 As the sheet prints it: ISO 75 0.45 MPa	in the median
HDT at 1.8 MPa	84 °Cp. 2: Heat Deflection Temperature	ISO 75 As the sheet prints it: ISO 75 1.8 MPa	in the median
Vicat softening temperature	94 °Cp. 2: Vicar Softening Temperature	ISO 306, GB/T 1633
Melting temperature	200 °Cp. 2: Melting Temperature	DSC As the sheet prints it: DSC, 10 °C/min
Density	1.05 g/cm³p. 2: Density	specimen not stated, ISO 1183
Water absorption	0.65 %p. 2: Saturated Water Absorption Rate	no standard named As the sheet prints it: te 25 °C, 55% RH tested at 25°C
Melt mass-flow rate	34.2 ± 3.8 g/10 minp. 2: Melt Index	specimen not stated, no standard named As the sheet prints it: 260 °C, 2.16 kg tested at 260°Cmoisture state not statedtreatment not stated

Also named without a value: glass transition temperature, crystallization temperature.
Kingroon, KINGROON Filament Technical Data Sheet V1.0 ABS1 value
Charpy impact strength XY	39.3 ± 3.6 kJ/m²p. 2: Impact Strength (X-Y)	ISO 179, GB/T 1043	not in the median: notch not stated

Print settings

Nozzle: 240–270 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: 45–60 °Cown data sheet
Drying: 80 °C for 8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: 80 °C for 12 hown data sheet

Its 2 print profiles, in the documents' words

Nozzle 240 - 270 °C; Bed 80 - 100 °C; Chamber 45 - 60 °C; Drying Blast Drying Oven: 80 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - ABSRecommended printing settings
No temperature statedBambu Lab, ABS official maker product pagep. 1: Cautions for Use

Price

26 CAD/kgits one regular price in the sample

5 listings: 1 in its price, 2 with no regular price per kilogram recorded, 2 where a Canadian listing is used instead

Bambu Lab Canada: 26 CAD/kgABS - Black (40101) / Refill / 1kgin its price; seen 10 Sep 2026
Bambu Lab Canada: 30 per kg, sale priceABS - Silver (40102) / Filament with spool / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
Bambu Lab Canada: 30 per kg, sale priceABS - Black (40101) / Filament with spool / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
3D Printing Canada: 30 CAD/kgWhite - Bambu Lab ABS Filament - 1.75mm, 1kg / Filament with spoolnot used: a Canadian listing is used instead; seen 10 Sep 2026
3D Printing Canada: 26 CAD/kgBlack - Bambu Lab ABS Filament - 1.75mm, 1kg / Refillnot used: a Canadian listing is used instead; seen 10 Sep 2026

Its 4 documents

What the maker says (7)

BenefitsABS is a technical material for 3D printing, known for its superior comprehensive properties such as high temperature resistance, UV resistance and water resistance.Bambu Lab, Bambu Filament Technical Data Sheet - ABSp. 1
BenefitsIn addition, it's very suitable for high-speed printing because of its good flow behavior.Bambu Lab, Bambu Filament Technical Data Sheet - ABSp. 1
Pitfalls and limitationsHowever, the disadvantage is that it warps easily and stinks when printing.Bambu Lab, Bambu Filament Technical Data Sheet - ABSp. 1
Warping and shrinkageBambu ABS is designed to reduce warping and cracking but maintain outstanding impact resistance.Bambu Lab, Bambu Filament Technical Data Sheet - ABSp. 1
Odour and emissionsOdor OdorlessBambu Lab, Bambu Filament Technical Data Sheet - ABSp. 3
Good forBambu ABS filament offers exceptional heat resistance (Heat Deflection Temperature: 87 °C) coupled with commendable mechanical properties. This makes it an outstanding choice for everyday functional parts that require high-temperature resistance.Bambu Lab, ABS official maker product pagep. 1: exact product features/description/application tips, source text line 125
Warping and shrinkageABS is prone to warping when printing a large size and/or high infill density model. To avoid warping: 1) Not recommended to print too large size and/or high infill density model. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.Bambu Lab, ABS official maker product pagep. 1: exact product features/description/application tips, source text line 147

Specimen preparation (1)

All the specimens were annealed and dried at 80 °C for 12 h before testingBambu Lab, Bambu Filament Technical Data Sheet - ABSTest specimen preparation

Chemicals and environment (7)

Water solubility: insolubleInsoluble in waterBambu Lab, Bambu Filament Technical Data Sheet - ABSSolubility
Acid resistance: resistantResistantBambu Lab, Bambu Filament Technical Data Sheet - ABSResistance to Acid
Alkali resistance: resistantResistantBambu Lab, Bambu Filament Technical Data Sheet - ABSResistance to Alkali
Organic solvent resistance: limitedNot resistant to some organic solventsBambu Lab, Bambu Filament Technical Data Sheet - ABSResistance to Organic Solvent
Oil and grease resistance: limitedNot resistant to some kinds of oil and greaseBambu Lab, Bambu Filament Technical Data Sheet - ABSResistance to Oil and Grease
Flammability: flammableFlammableBambu Lab, Bambu Filament Technical Data Sheet - ABSFlammability
Post-processing: described in wordsthe suggested annealing temperature of models printed with Bambu ABS is 80 to 90 °C, and the time is 6 to 12 hours.Bambu Lab, Bambu Filament Technical Data Sheet - ABSp. 3: Annealing note

Kingroon ABSStrength XY, MPa33Strength Z, MPa28Modulus XY, GPa2.2Charpy notched, kJ/m²21.5HDT 0.45, °C87HDT 1.8, °C84Price, CAD/kg—Nozzle, °C240–270Bed, °C80–100Chamber, °C45–60Drying, °C, h808 h

Kingroon ABSKingroon

Data sheet shared with Bambu Lab ABS: their values are one table, recorded once.

Published values

No value is on file for this product.

Print settings

Nozzle: 240–270 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: 45–60 °Cown data sheet
Drying: 80 °C for 8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: 80 °C for 12 hBambu Lab ABS's data sheet, shared

Its print profile, in the documents' words

Nozzle 240 - 270 °C; Bed 80 - 100 °C; Chamber 45 - 60 °C; Drying Blast Drying Oven: 80 °C, 8 hKingroon, KINGROON Filament Technical Data Sheet V1.0 ABSp. 1: Recommended printing settings: Nozzle Temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

BenefitsKINGROON ABS is a high-performance 3D printing material known for its excellent heat resistance, UV resistance, and water resistance.Kingroon, KINGROON Filament Technical Data Sheet V1.0 ABSp. 1
Warping and shrinkageWhile traditional ABS is prone to warping and produces noticeable odor during printing, KINGROON ABS is specially formulated to reduce warping and cracking while maintaining exceptional impact strength.Kingroon, KINGROON Filament Technical Data Sheet V1.0 ABSp. 1
Warping and shrinkageThe actual effect of annealing depends on temperature, duration, and the characteristics of the model, including its size, structure, infill, and other printing settings; some prints may warp or deform during this process.Kingroon, KINGROON Filament Technical Data Sheet V1.0 ABSp. 3

Chemicals and environment (1)

Post-processing: described in wordsFor printed models, the recommended annealing conditions are 80–90 °C for 6–12 hours.Kingroon, KINGROON Filament Technical Data Sheet V1.0 ABSp. 3: Annealing note

Polymaker ABSStrength XY, MPa33.4Strength Z, MPa29.7Modulus XY, GPa2.25Charpy notched, kJ/m²18HDT 0.45, °C100HDT 1.8, °C98Price, CAD/kg31Nozzle, °C245–265Bed, °C90–100Chamber, °C25–90Drying, °C, h706 h

Polymaker ABSPolymaker

Published values

Property	As published	Conditions	On the Overview
Polymaker, PolyLite ABS Technical Data Sheet16 valuesThe same values also in Polymaker, Polymaker™ ABS Technical Data Sheet and Polymaker, PolyLite™ ABS Technical Data Sheet.Unless a row says otherwise: printed specimen as printed All specimens were conditioned at room temperature for 24 h prior to testing print settings Printed at 255 °C nozzle, 100 °C bed, 2 shells, 4 top and bottom layers, 100% infill, 90 °C environmental temperature, cooling fan off (p. 5: how to make specimens)
Tensile modulus XY	2246.6 ± 58.2 MPap. 4: Young's modulus (X-Y)also in Polymaker, Polymaker™ ABS Technical Data Sheetalso in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Tensile modulus Z	2080.9 ± 92.7 MPap. 4: Young's modulus (Z)also in Polymaker, Polymaker™ ABS Technical Data Sheetalso in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Tensile strength (yield or break not stated) XY	33.4 ± 0.6 MPap. 4: Tensile strength (X-Y)also in Polymaker, Polymaker™ ABS Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Tensile strength (yield or break not stated) Z	29.7 ± 0.3 MPap. 4: Tensile strength (Z)also in Polymaker, Polymaker™ ABS Technical Data Sheetalso in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Elongation at break XY	17.9 ± 1.3 %p. 4: Elongation at break (X-Y)also in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Elongation at break Z	3.1 ± 0.3 %p. 4: Elongation at break (Z)also in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Flexural modulus XY	2127.2 ± 29.9 M P ap. 4: Bending modulus (X-Y)also in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 178, GB/T 9341 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Flexural strength XY	56.2 ± 0.3 M P ap. 4: Bending strength (X-Y)also in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 178, GB/T 9341 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Charpy impact strength XY	18.0 ± 0.9 kJ /m2p. 4: Charpy impact strength (X-Y)also in Polymaker, Polymaker™ ABS Technical Data Sheetalso in Polymaker, PolyLite™ ABS Technical Data Sheet	ISO 179, GB/T 1043 moisture All specimens were conditioned at room temperature for 24h prior to testing notched	in the median
HDT at 0.45 MPa	99.6 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa	ISO 75 As the sheet prints it: ISO 75 0.45MPa	in the median
HDT at 1.8 MPa	98.2 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa	ISO 75 As the sheet prints it: ISO 75 1.8MPa	in the median
Glass transition temperature	101.1 °Cp. 3: Glass transition temperature	specimen not stated, DSC As the sheet prints it: DSC, 10°C/min treatment not statedprint settings not stated	not in the median: another value of this product is in it
Vicat softening temperature	103.9 °Cp. 3: Vicat softening temperature	ISO 306, GB/T 1633
Density	1.12 g/cm3p. 2: Density	specimen not stated, ISO 1183, GB/T 1033tested at 23 °Ctreatment not statedprint settings not stated
Water absorption	0.35 %p. 2: Equilibrium water absorptionalso in Polymaker, PolyLite™ ABS Technical Data Sheet	specimen not stated, no standard statedtreatment not statedprint settings not stated
Melt mass-flow rate	9 - 14 g/10minp. 2: Melt indexalso in Polymaker, PolyLite™ ABS Technical Data Sheet	specimen not stated, no standard named As the sheet prints it: 220°C, 2.16kg treatment not statedprint settings not stated

Polymaker, PolyLite™ ABS Technical Data Sheet3 valuesThe same values also in Polymaker, Polymaker™ ABS Technical Data Sheet.Unless a row says otherwise: specimen not stated
Tensile strength (yield or break not stated) XY	33.4 ± 92.7 MPap. 1: Tensile strength (X-Y)	printed specimen, ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 90°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	not in the median: another value of this product is in it
Vicat softening temperature	104 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633also in Polymaker, Polymaker™ ABS Technical Data Sheet	ISO 306, GB/T 1633 As the sheet prints it: 306 ISO 306 GB/T 1633
Density	1.04 g/cm3p. 1: Density ISO1183, GB/T1033also in Polymaker, Polymaker™ ABS Technical Data Sheet	ISO 1183, GB/T 1033 As the sheet prints it: 1183 ISO1183 GB/T1033
Polymaker, Polymaker™ ABS Technical Data Sheet3 valuesThe same values also in Polymaker, PolyLite™ ABS Technical Data Sheet.Unless a row says otherwise: printed specimen (implied by the document)
HDT at 0.45 MPa	100°Cp. 1: Heat deflection temp. ISO 75 0.45MPa	ISO 75 As the sheet prints it: ISO 75 0.45MPa	not in the median: another value of this product is in it
HDT at 1.8 MPa	98°Cp. 1: Heat deflection temp. ISO 75 1.8MPa	ISO 75 As the sheet prints it: ISO 75 1.8MPa	not in the median: another value of this product is in it
Glass transition temperature	101 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in Polymaker, PolyLite™ ABS Technical Data Sheet	specimen not stated, DSC	in the median

Print settings

Nozzle: 245–265 °Cown data sheet
Bed: 90–100 °Cown data sheet
Heated chamber: 25–90 °Cown data sheet
Drying: 70 °C for 6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 3 print profiles, in the documents' words

Nozzle 245-265°C; Bed 90-100°C; Drying 70°C/6HPolymaker, Polymaker™ ABS Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber
Nozzle 245-265°C; Bed 90-100°C; Drying 70°C/6HPolymaker, PolyLite™ ABS Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber
Nozzle 245 – 265 (℃); Bed 90 - 100 (˚C); Chamber Room temperature - 90 (˚C)Polymaker, PolyLite ABS Technical Data Sheetp. 4: Build plate temperature, Environmental temperature, Nozzle temperature

Price

31.5 CAD/kgthe median of its 2 regular prices in the sample

2 listings

DigitMakers: 35 CAD/kgPolyLite™ ABS Various Colors (1.75mm 1000g) / Black (SKU PLMK-FL-PLITE-ABS-1.75-1000G-BLK)in its price; seen 30 Sep 2026
Voxel Factory: 28 CAD/kgPolymaker PolyLite ABS 1.75mm 1kg / Black (SKU PMK-ABS-BLK-175-1KG)in its price; seen 30 Sep 2026

Its 5 documents

What the maker says (9)

Odour and emissionsIt delivers excellent printing quality with minimal odor during printing.Polymaker, PolyLite ABS Technical Data Sheetp. 2
Odour and emissionsPolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins.Polymaker, PolyLite ABS Technical Data Sheetp. 2
Supports and removalRecommended support material PolyDissolve™ S2Polymaker, PolyLite ABS Technical Data Sheetp. 4
Odour and emissionsIt delivers excellent printing quality with minimal odor during printing.Polymaker, Polymaker™ ABS Technical Data Sheetp. 1
Odour and emissionsPolymaker™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins.Polymaker, Polymaker™ ABS Technical Data Sheetp. 1
Pitfalls and limitationsIt is highly recommended to use the PolyBox™ or PolyDryer™ Box when printing or storing Polymaker™ HT-PLA-GFPolymaker, PolyLite™ ABS Technical Data Sheetp. 1
Odour and emissionsIt delivers excellent printing quality with minimal odor during printing.Polymaker, PolyLite™ ABS Technical Data Sheetp. 1
Odour and emissionsPolyLiteTM ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins.Polymaker, PolyLite™ ABS Technical Data Sheetp. 1
Good forExcellent Heat Resistance and Mechanical Strength This filament is engineered for projects that demand both robust mechanical properties and reliable heat resistance. PolyLite™ ABS maintains its strength and shape even in challenging environments, making it suitable for functional parts, enclosures, and prototypes.Polymaker, Polymaker ABS official product pagep. 1: Description, historical branded uses

Chemicals and environment (5)

Acid resistance: resistantGoodEffect of weak acids · weakPolymaker, Polymaker™ ABS Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak acids
Acid resistance: not resistantPoorEffect of strong acids · strongPolymaker, Polymaker™ ABS Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong acids
Alkali resistance: resistantGoodEffect of weak alkalis · weakPolymaker, Polymaker™ ABS Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis
Alkali resistance: limitedFairEffect of strong alkalis · strongPolymaker, Polymaker™ ABS Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis
Oil and grease resistance: resistantGoodEffect of oils and greasePolymaker, Polymaker™ ABS Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease

QIDI ABSStrength XY, MPa39Strength Z, MPa26.2Modulus XY, GPa2.38Charpy notched, kJ/m²20HDT 0.45, °C92HDT 1.8, °C86Price, CAD/kg—Nozzle, °C240–260Bed, °C100–110Chamber, °C60–80Drying, °C, h70–804–6 h

QIDI ABSQIDI

Published values

Property	As published	Conditions	On the Overview
QIDI, Technical Data Sheet QIDI ABS18 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	2384.22 ± 20.0 MPap. 2: (X-Y) 拉伸模量 Young's Modulus	ISO 527	in the median
Tensile modulus Z	1967.57 ± 119.93 MPap. 3: Young's Modulus (无保温环境/开放式打印机)	no standard stated	in the median
Tensile modulus Z	2201.74 ± 74.91 MPap. 3: Young's Modulus (Chamber Temp: 55℃)	no standard stated	not in the median: another value of this product is in it
Tensile yield strength XY	38.96 ± 0.33 MPap. 2: 拉伸屈服强度 Tensile yield strength (X-Y)	no standard stated	in the median
Tensile break strength XY	33.36 ± 0.53 MPap. 3: 拉伸断裂强度 Tensile breaking strength (X-Y)	no standard stated	not in the median: another value of this product is in it
Tensile break strength Z	26.16 ± 1.73 MPap. 3: Tensile breaking strength	no standard stated	in the median
Elongation at break XY	5.77 ± 0.84 %p. 3: 断裂伸长率 Elongation at break (X-Y)	no standard stated	in the median
Elongation at break Z	1.62 ± 0.14 %p. 3: 断裂伸长率 Elongation at break (Z)	no standard stated	in the median
Elongation at yield XY	2.32±0.02 %p. 2: Tensile Yield elongation (X-Y)	ISO 527	listed under other properties
Flexural modulus XY	2400 ± 79.69 MPap. 3: Bending Modulus	no standard stated	in the median
Flexural strength XY	67.81 ± 0.54 MPap. 3: 弯曲强度 Bending strength (X-Y)	no standard stated	in the median
Charpy impact strength XY	20.03 ± 1.32 KJ/㎡p. 3: Charpy impact strength ISO 179	ISO 179notched	in the median
HDT at 0.45 MPa	92 °Cp. 2: Determination of temperature 拉伸屈服强度	no standard named As the sheet prints it: 0.45MPa	in the median
HDT at 1.8 MPa	86 °Cp. 2: 热变形温度 ISO 75:Method A	ISO 75 As the sheet prints it: 1.8MPa ISO 75	in the median
Glass transition temperature	101 °Cp. 2: 玻璃化转变温度 ISO 11357 Glass transition temperature	specimen not stated, ISO 11357	in the median
Vicat softening temperature	103 °Cp. 2: 维卡软化点 ISO 306 Vicat softening temperature	ISO 306
Density	1.05 g/cm³p. 2: 密度 ISO 1183	specimen not stated, ISO 1183
Melt mass-flow rate	7.8 g/10minp. 2: Melt index	specimen not stated, no standard stated

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: 60–80 °Cown data sheet
Drying: 70–80 °C for 4–6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240-260°C; Bed 100-110°C; Chamber it is recommended to set the temperature of heated chamber between 60-80°C; Drying please dry the filament at 70-80°C for 4-6 hoursQIDI, Technical Data Sheet QIDI ABSp. 5: Drying note; p. 4: Nozzle Temperature; p. 4: Build plate temperature; p. 5: Additional Suggestions

Price

Not in the price sample.

Its 2 documents

What the maker says (8)

Good forTherefore, QIDI ABS is ideal for printing functional prototypes, jigs and low-volume production parts.QIDI, Technical Data Sheet QIDI ABSp. 1
Odour and emissionsCompared with other ABS filaments, it has a much lower odor and excellent mechanical properties.QIDI, Technical Data Sheet QIDI ABSp. 1
Supports and removalQIDI ABS can be used together with QIDI S-White Quick-Remove Support Material to solve the poor surface of complex model above supports.QIDI, Technical Data Sheet QIDI ABSp. 2
Warping and shrinkageIt can effectively avoid printed parts from warping and cracking.QIDI, Technical Data Sheet QIDI ABSp. 5
Moisture sensitivityIf the ABS filament has been unpacked for a long time and the printing quality starts to degrade during the printing process, please dry the filament at 70-80°C for 4-6 hours before printing.QIDI, Technical Data Sheet QIDI ABSp. 5
Odour and emissionsAlthough QIDI ABS has much less odor compared with similar products, it is still recommended to place the printer in a well-ventilated area during printing.QIDI, Technical Data Sheet QIDI ABSp. 5
Printing adviceCompared with PLA, PETG and other materials, ABS materials need a higher chamber temperature to help release the residual stress during the printing process.QIDI, Technical Data Sheet QIDI ABSp. 5
Printing advicePlease keep the printer chamber closed during the printing process.QIDI, Technical Data Sheet QIDI ABSp. 5

Fiberlogy ABSStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²18HDT 0.45, °C94HDT 1.8, °C100Price, CAD/kg—Nozzle, °C250–265Bed, °C90–110Chamber, °CenclosedDrying, °C, h604 h

Fiberlogy ABSFiberlogy

Data sheet shared with Fiberlogy R ABS: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ABS14 values
Tensile modulus orientation not stated	1750 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	42 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Tensile break strength orientation not stated	32 MPap. 1: Tensile Strength @ Break ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	35 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	5 %p. 1: Elongation @ Yield ISO 527 %	ISO 527	listed under other properties
Flexural modulus orientation not stated	1850 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: another value of this product is in it
Flexural strength orientation not stated	60 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	not in the median: another value of this product is in it
Izod impact strength	30 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 0.45 MPa	94 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	85 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	not in the median: another value of this product is in it
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature Tg DSC °C	no standard stated	in the median
Vicat softening temperature	100 °Cp. 1: Vicat Softening Temperature ISO 306 °C	ISO 306
Continuous service temperature	60 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C	no standard named As the sheet prints it: UL 746
Density	1.04 g/cm³p. 1: Specific Gravity	ISO 1183

Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ABS7 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	2300 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	45 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	2.5 %p. 1: Elongation @ Yield ISO 527 %	specimen not stated, ISO 527	listed under other properties
Flexural modulus orientation not stated	2300 MPap. 1: Flexular Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	68 MPap. 1: Flexular Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	18 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2	ISO 179 As the sheet prints it: 23°C ISO 179 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	97 °Cp. 1: Vicat Softening Temperature ISO 306 °C	specimen not stated, ISO 306
Fiberlogy, ABS Filament4 valuesUnless a row says otherwise: specimen not stated
Elongation at break orientation not stated	2.5%p. 1: Elongation at break	ISO 527	not in the median: another value of this product is in it
Charpy impact strength orientation not stated	18 kJ/m²p. 1: Charpy impact strength (notched) @ 23°C	ISO 179tested at 23°C	not in the median: another value of this product is in it
HDT at 1.8 MPa	100°C (annealed)p. 1: Deflection temperature under load @ 1.8 MPa	printed specimen (implied by the document), ISO 75 As the sheet prints it: ISO 75; 1.8 MPa annealed at a temperature its sheet does not state for a time its sheet does not state annealed	in the median
Density	1.05 g/cm³p. 1: Density	no standard stated

Print settings

Nozzle: 250–265 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 60 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: temperature not statedown data sheet

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, ABS Filament.

Its 4 print profiles, in the documents' words

Nozzle 250°C - 265°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ABSp. 1: Recommended printing settings
Nozzle 250°C - 265°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ABSp. 1: Recommended printing settings
Nozzle 250°C - 265°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ABSp. 1: Recommended printing settings
Nozzle 250–265°C; Bed 100°C; Drying 60°C / 4hFiberlogy, ABS Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed; p. 1: Drying conditions; p. 1: Enclosed chamber

Price

Not in the price sample.

Its 5 documents

What the maker says (1)

BenefitsModels printed with ABS are characterized by high rigidity and durabilityFiberlogy, ABS Filamentp. 1

Fiberlogy ABS PLUSStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa1.72Charpy notched, kJ/m²18HDT 0.45, °C94HDT 1.8, °C100Price, CAD/kg—Nozzle, °C250–270Bed, °C90–110Chamber, °CenclosedDrying, °C, h604 h

Fiberlogy ABS PLUSFiberlogy

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ABS PLUS14 values
Tensile modulus orientation not stated	1720 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	40 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	33 MPap. 1: Tensile Strength @ Break ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	40 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	6 %p. 1: Elongation @ Yield ISO 527 %	ISO 527	listed under other properties
Flexural modulus orientation not stated	1800 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	58 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	32 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 0.45 MPa	94 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	85 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	not in the median: another value of this product is in it
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature Tg DSC °C	no standard stated	in the median
Vicat softening temperature	100 °Cp. 1: Vicat Softening Temperature ISO 306 °C	ISO 306
Continuous service temperature	60 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C	no standard named As the sheet prints it: UL 746
Density	1.03 g/cm³p. 1: Specific Gravity	ISO 1183

Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ABS PLUS7 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	2300 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	45 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Elongation at yield orientation not stated	2.5 %p. 1: Elongation @ Yield ISO 527 %	specimen not stated, ISO 527	listed under other properties
Flexural modulus orientation not stated	2300 MPap. 1: Flexular Modulus ISO 178 MPa	ISO 178	not in the median: another value of this product is in it
Flexural strength orientation not stated	68 MPap. 1: Flexular Strength ISO 178 MPa	ISO 178	not in the median: another value of this product is in it
Charpy impact strength	18 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2	ISO 179 As the sheet prints it: 23°C ISO 179 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	97 °Cp. 1: Vicat Softening Temperature ISO 306 °C	specimen not stated, ISO 306
Fiberlogy, ABS Plus Filament4 valuesUnless a row says otherwise: specimen not stated
Elongation at break orientation not stated	2.5%p. 1: Elongation at break	ISO 527	not in the median: another value of this product is in it
Charpy impact strength orientation not stated	18 kJ/m²p. 1: Charpy impact strength (notched) @ 23°C	ISO 179tested at 23°C	not in the median: another value of this product is in it
HDT at 1.8 MPa	100°C (annealed)p. 1: Deflection temperature under load @ 1.8 MPa	ISO 75 As the sheet prints it: ISO 75; 1.8 MPa annealed at a temperature its sheet does not state for a time its sheet does not state annealed	in the median
Density	1.05 g/cm³p. 1: Density	no standard stated

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 60 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: temperature not statedown data sheet

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, ABS Plus Filament.

Its 3 print profiles, in the documents' words

Nozzle 250°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ABS PLUSp. 1: Recommended printing settings
Nozzle 250°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ABS PLUSp. 1: Recommended printing settings
Nozzle 250–270°C; Bed 100°C; Drying 60°C / 4 hoursFiberlogy, ABS Plus Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber

Price

Not in the price sample.

Its 4 documents

What the maker says (1)

Printing advicethe material does not require a closed chamberFiberlogy, ABS Plus Filamentp. 1

Fiberlogy R ABSStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa1.75Charpy notched, kJ/m²18HDT 0.45, °C94HDT 1.8, °C85Price, CAD/kg—Nozzle, °C250–265Bed, °C90–110Chamber, °CenclosedDrying, °C, h604 h

Fiberlogy R ABSFiberlogy

Data sheet shared with Fiberlogy ABS: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R ABS13 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	1750 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	42 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	32 MPap. 1: Tensile Strength @ Break ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	35 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	5 %p. 1: Elongation @ Yield ISO 527 %	specimen not stated, ISO 527	listed under other properties
Flexural modulus orientation not stated	1850 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	60 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	30 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 0.45 MPa	94 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	85 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature Tg DSC °C	specimen not stated, no standard stated	in the median
Vicat softening temperature	100 °Cp. 1: Vicat Softening Temperature ISO 306 °C	specimen not stated, ISO 306
Continuous service temperature	60 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C	specimen not stated, no standard named As the sheet prints it: UL 746
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R ABS7 values
Tensile modulus orientation not stated	2300 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	45 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Elongation at yield orientation not stated	2.5 %p. 1: Elongation @ Yield ISO 527 %	ISO 527	listed under other properties
Flexural modulus orientation not stated	2300 MPap. 1: Flexular Modulus ISO 178 MPa	ISO 178	not in the median: another value of this product is in it
Flexural strength orientation not stated	68 MPap. 1: Flexular Strength ISO 178 MPa	ISO 178	not in the median: another value of this product is in it
Impact strength, test unclear	18 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°CWhich test: probably Charpy	listed under other properties
Vicat softening temperature	97 °Cp. 1: Vicat Softening Temperature ISO 306 °C	ISO 306

Print settings

Nozzle: 250–265 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 60 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: temperature not statedFiberlogy ABS's data sheet, shared

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Fiberlogy, rABS Filament – S2; bed in Fiberlogy, rABS Filament – S2.

Its 3 print profiles, in the documents' words

Nozzle 250°C - 265°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy R ABSp. 1: Recommended printing settings
Nozzle 250°C - 265°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy R ABSp. 1: Recommended printing settings
Nozzle 220–250°C; Bed 100°C; Drying 60°C / 4 hoursFiberlogy, rABS Filament – S2p. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber

Price

Not in the price sample.

Its 4 documents

What the maker says (1)

Pitfalls and limitationsDue to the nature of the recycling process, the material may vary in shade and contain trace amounts of glitter.Fiberlogy, rABS Filament – S2p. 1

eSUN ABS+Strength XY, MPa44.9Strength Z, MPa33Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C79HDT 1.8, °C—Price, CAD/kg25Nozzle, °C265–275Bed, °C95–105Chamber, °CenclosedDrying, °C, h60–706–8 h

eSUN ABS+eSUN

Published values

Property	As published	Conditions	On the Overview
eSUN, Technical Data Sheet ABS+15 valuesThe same values also in eSUN, ABS+ Technical Data Sheet.Unless a row says otherwise: printed specimen print settings Extruder Temperature 270℃; Build Platform Temperature 100℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 0%; Maximum Volumetric Flow Rate 3mm³/s; Based on Bambu P1S 0.4 mm nozzle and Orcaslicer 2.1.0 Beta
Tensile strength (yield or break not stated) XY	44.9 MPap. 2: Tensile Strength (X-Y) GB/T 1040	GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	33 MPap. 2: Tensile Strength (Z) GB/T 1040	GB/T 1040	in the median
Elongation at break XY	3.9 %p. 2: Elongation at Break (X-Y) GB/T 1040	GB/T 1040	in the median
Elongation at break Z	3.1 %p. 2: Elongation at Break (Z) GB/T 1040	GB/T 1040	in the median
Flexural modulus XY	2492.5 MPap. 2: Flexural Modulus (X-Y) GB/T 9341	GB/T 9341	in the median
Flexural modulus Z	2233 MPap. 2: Flexural Modulus (Z) GB/T 9341	GB/T 9341	in the median
Flexural strength XY	74.8 MPap. 2: Flexural Strength (X-Y) GB/T 9341	GB/T 9341	in the median
Flexural strength Z	41.1 MPap. 2: Flexural Strength (Z) GB/T 9341	GB/T 9341	in the median
Izod impact strength XY	18 kJ/m2p. 2: IZOD Impact Strength (X-Y) GB/T 1843	GB/T 1843	not in the median: notch not stated
Izod impact strength Z	2 kJ/m2p. 2: IZOD Impact Strength (Z) GB/T 1843	GB/T 1843	not in the median: notch not stated
HDT XY, at 0.45 MPa	89 ℃p. 2: Heat Distortion Temperature (X-Y) GB/T 1634	GB/T 1634 As the sheet prints it: GB/T 1634 0.45MPa print settings not stated	not in the median: another value of this product is in it
HDT Z, at 0.45 MPa	86.3 ℃p. 2: Heat Distortion Temperature (Z) GB/T 1634	GB/T 1634 As the sheet prints it: GB/T 1634 0.45MPa print settings not stated	not in the median: measured on a bar in another orientation
HDT at 0.45 MPa	78.9 ℃p. 1: Heat Distortion Temperature GB/T 1634	GB/T 1634 As the sheet prints it: GB/T 1634 0.45MPa print settings not stated	in the median
Density	1.06 g/cm3p. 1: Density GB/T 1033also in eSUN, ABS+ Technical Data Sheet	specimen not stated, GB/T 1033print settings not stated
Melt mass-flow rate	27 g/10minp. 1: Melt Flow Index GB/T 3682	specimen not stated, GB/T 3682print settings not stated

eSUN, ABS+ official maker product page11 valuesUnless a row says otherwise: printed bar (its stated orientation says so)
Tensile strength (yield or break not stated) XY	40.12 MPap. 1: Tensile Strength (XY) (MPa)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Tensile strength (yield or break not stated) Z	14.94 MPap. 1: Tensile Strength (Z) (MPa)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Elongation at break XY	5.54 %p. 1: Elongation at Break (XY) (%)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Elongation at break Z	2.12 %p. 1: Elongation at Break (Z) (%)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural modulus XY	1865.99 MPap. 1: Flexural Modulus (XY) (MPa)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural modulus Z	1506.71 MPap. 1: Flexural Modulus (Z) (MPa)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural strength XY	59.5 MPap. 1: Flexural Strength (XY) (MPa)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural strength Z	21.4 MPap. 1: Flexural Strength (Z) (MPa)	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Izod impact strength XY	26.45 kJ/m²p. 1: IZOD Impact Strength (XY) (kJ/m²)	no standard stated	not in the median: notch not stated
Izod impact strength Z	1.77 kJ/m²p. 1: IZOD Impact Strength (Z) (kJ/m²)	no standard stated	not in the median: notch not stated
Melt mass-flow rate	15(220℃/10kg) g/10minp. 1: Melt Flow Index(g/10min)	specimen not stated, no standard named As the sheet prints it: 10kg tested at 220℃

eSUN, ABS+ Technical Data Sheet6 valuesUnless a row says otherwise: moulded bar (resin supplier's value)
Tensile strength (yield or break not stated) orientation not stated	40 MPap. 1: Tensile Strength GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Elongation at break orientation not stated	30 %p. 1: Elongation at Break GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	1203 MPap. 1: Flexural Modulus GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Flexural strength orientation not stated	68 MPap. 1: Flexural Strength GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Izod impact strength	42 kJ/m2p. 1: IZOD Impact Strength	GB/T 1843	not in the median: measured on a moulded bar
HDT	73 ℃p. 1: Heat distortion Temperature	GB/T 1634	not in the median: measured on a moulded bar
eSUN, ABS+ formulation-change notice published2026-06-15 describing2025update1 value
HDT	89°Cp. 1: heat deflection temperature	no standard stated	not in the median: another value of this product is in it

Print settings

Nozzle: 265–275 °Cown data sheet
Bed: 95–105 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 60–70 °C for 6–8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in eSUN, ABS+ Technical Data Sheet, eSUN, ABS+ official maker product page.

Its 4 print profiles, in the documents' words

Nozzle 230-270℃; Bed 95-110°CeSUN, ABS+ Technical Data Sheetp. 2: Recommended printing settings
Nozzle 270±5 ℃(Recommended temperature 270℃); Bed 95-105℃(Recommended temperature 100℃); Drying 60-70 ℃,6-8 hourseSUN, Technical Data Sheet ABS+p. 3: Recommended printing settings: Build Platform Temperature, Nozzle Temperature; p. 3: Drying Preparation; p. 4: Printing note; p. 3: Build Platform Type
Nozzle 260-270°CeSUN, ABS+ formulation-change notice published2026-06-15 describing2025updatep. 1: melted and extruded at high temperatures; p. 1: enclosure (warping and cracking)
Nozzle 230-270℃/446-518℉; Bed 95-110℃eSUN, ABS+ official maker product pagep. 1: Bed Temperature(°C); p. 1: Printing Recommendation; p. 1: Extruder Temperature(°C)

Price

24.5 CAD/kgthe median of its 2 regular prices in the sample

2 listings

Shop3D.ca: 24 CAD/kgeSUN ABS+ - 1.75mm 3D Filament - 1KG / 1.75 / Black (SKU ABS+P175B1)in its price; seen 30 Sep 2026
DigitMakers: 25 CAD/kgeSUN ABS+ Filament 1.75 mm 1kg Spool - Various Colors / Black (SKU ESUN-FL-ABS+-1.75-1KG-BLK)in its price; seen 30 Sep 2026

Its 5 documents

What the maker says (18)

Good formaking it widely applicable in 3D printer parts, tooling fixtures, electronics and electrical appliances, household appliances, automotive components, and more.eSUN, Technical Data Sheet ABS+p. 1
Warping and shrinkageAdding SAN to ABS can increase rigidity and improve interlayer strength and bending performance, while adding warpage modifiers to ABS can enhance the material's resistance to printing warpage.eSUN, Technical Data Sheet ABS+p. 1
Warping and shrinkageABS filament has the advantages of minimal warping, excellent interlayer strength, good temperature resistance, relatively good toughness, and little to no stringingeSUN, Technical Data Sheet ABS+p. 1
Pitfalls and limitationsIt can withstand corrosion from some weak acids and bases, but its chemical resistance is poor against highly concentrated corrosive acids and bases, such as concentrated sulfuric acid, concentrated hydrochloric acid, or concentrated sodium hydroxide, making it prone to erosion.eSUN, Technical Data Sheet ABS+p. 2
Pitfalls and limitationsOil resistance: ABS shows good resistance to some common machine oils and lubricants, but its performance may decline under high-temperature or highly chemically corrosive oils.eSUN, Technical Data Sheet ABS+p. 3
Printing adviceDue to its relatively fast cooling rate, we strongly recommend printing ABS material inside an enclosed printer.eSUN, Technical Data Sheet ABS+p. 4
Printing adviceTo improve the print quality of ABS material, there are two suggestions: use a medium to large fan to accelerate cooling and minimize overhang angles in the model structure, or print at a high bed temperature to reduce warping.eSUN, Technical Data Sheet ABS+p. 4
Good forMachinery • ToyeSUN, ABS+ Technical Data Sheetp. 1
BenefitsExcellent printabilityeSUN, ABS+ Technical Data Sheetp. 1
BenefitsWith high toughness and high impact resistance, ABS+ can be used to print sturdy and durable partseSUN, ABS+ Technical Data Sheetp. 1
Warping and shrinkagelow shrinkage, not easy to warp and crack during printing.eSUN, ABS+ Technical Data Sheetp. 1
Odour and emissionslow VOC volatile content, low odor during printing, comfortable printing without pressureeSUN, ABS+ Technical Data Sheetp. 1
Pitfalls and limitationsThe cooling of ABS+ is slightly worse.eSUN, ABS+ Technical Data Sheetp. 2
Printing adviceThe shrinkage rate of ABS+ material is large, so you should pay attention to heat preservation when printing, and print in a printer with a closed chamber.eSUN, ABS+ Technical Data Sheetp. 2
Printing adviceYou can turn on a fan to improve the printing effect, or reduce the drape angle structure in the model; or try to reduce the speed to print.eSUN, ABS+ Technical Data Sheetp. 2
Pitfalls and limitationsIn order to make ABS compatible with both “easy printing” and “high performance”, eSUN restructured the formula of the ABS+ filament in 2025 — the brand-new generation of “Zero-Warping ABS+” officially debuts.eSUN, ABS+ formulation-change notice published2026-06-15 describing2025updatep.1: Official formulation notice, source text line66
Pitfalls and limitationsIn terms of other performances, after multi-party comparison tests, the interlayer bonding strength of the new ABS+ has been significantly improved at present, and the Z-axis tensile strength can reach 33MPa, which is at a leading level among ABS materials on the market. In addition, the heat deflection temperature of the new ABS+ can reach 89°C , which is also a certain improvement compared to ordinary ABS materials (around 75°C).eSUN, ABS+ formulation-change notice published2026-06-15 describing2025updatep.1: Official formulation notice, source text line78
Pitfalls and limitationsHeat deflection up to 89'C, it performs reliably even in tough conditions such as in-car heat exposure or areas near heat sources, maintaining long-term structural stability without warping.eSUN, ABS+ official maker product pagep.1: Official product page, source text line117

Raise3D Hyper Speed ABSStrength XY, MPa45Strength Z, MPa29Modulus XY, GPa1.77Charpy notched, kJ/m²—HDT 0.45, °C73HDT 1.8, °C—Price, CAD/kg52Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

Raise3D Hyper Speed ABSRaise3D

Published values

Property	As published	Conditions	On the Overview
Raise3D, Raise3D Hyper Speed ABS Technical Data Sheet13 valuesUnless a row says otherwise: printed specimen moisture All specimens were conditioned at room temperature for 24h prior to testing. print settings Nozzle diameter=0.4mm; nozzle temperature = 250 °C; printing speed = 200 mm/s; build plate temperature = 70 °C; infill = 100%
Tensile modulus XY	1770 ± 165 MPap. 1: Young’s modulus (X-Y) ISO 527	ISO 527	in the median
Tensile modulus Z	1445 ± 156 MPap. 1: Young’s modulus (Z) ISO 527	ISO 527	in the median
Tensile strength (yield or break not stated) XY	45 ± 9 MPap. 1: Tensile strength (X-Y) ISO 527	ISO 527	in the median
Tensile strength (yield or break not stated) Z	29 ± 5 MPap. 1: Tensile strength (Z) ISO 527	ISO 527	in the median
Elongation at break XY	40 ± 3 %p. 1: Elongation at break (X-Y) ISO 527	ISO 527	in the median
Elongation at break Z	15 ± 5 %p. 2: Elongation at break (Z) ISO 527	ISO 527	in the median
Flexural modulus orientation not stated	1950 ± 165 MPap. 2: Bending modulus ISO 178	ISO 178	in the median
Flexural strength orientation not stated	52 ± 7 MPap. 2: Bending strength ISO 178	ISO 178	in the median
Izod impact strength	7.0 ± 1.0 KJ/m2p. 2: Impact strength ISO 180	ISO 180	not in the median: notch not stated
HDT	73 °Cp. 1: Heat Distortion Temperature (°C)	no standard named As the sheet prints it: Custom method moisture state not stated	not in the median: set apart (never used to pass), no stated test load
Density	1.08 g/cm³p. 1: Density (g/cm³)	ISO 1183, GB/T 1033moisture state not statedprint settings not stated
Water absorption	0.36 %p. 1: Water absorption (%)	ISO 62 As the sheet prints it: ISO 62: Method 1 moisture state not statedprint settings not stated
Melt mass-flow rate	55 g/10 minp. 1: Melt Flow Index (g/10 min)	specimen not stated, ISO 1133 As the sheet prints it: ISO 1133; 10 kg tested at 220 °Cmoisture state not statedprint settings not stated

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

No temperature statedRaise3D, Raise3D Hyper Speed ABS Technical Data Sheetp. 2: Recommended printing settings. Its nozzle and bed temperatures are the specimens' print conditions, which are not printing guidance.

Price

52 CAD/kgits one regular price in the sample

1 listing

Shop3D.ca: 52 CAD/kgRaise3D Hyper Speed ABS Filament - 1.75mm (1kg) / Black V2 (SKU [S]5.11.19114A01)in its price; seen 30 Sep 2026

Its 2 documents

What the maker says (5)

Good forHyper Speed ABS is also perfectly suitable for many functional prototyping parts, tools and fitting with different post-processing possibilities.Raise3D, Raise3D Hyper Speed ABS Technical Data Sheetp. 1
BenefitsHyper Speed ABS Filament is one of the specially developed high-speed filament line for FFF printing.Raise3D, Raise3D Hyper Speed ABS Technical Data Sheetp. 1
Warping and shrinkagealmost zero-warpageRaise3D, Raise3D Hyper Speed ABS Technical Data Sheetp. 1
Adhesion between layersimproved interlayer bondingRaise3D, Raise3D Hyper Speed ABS Technical Data Sheetp. 1
Odour and emissionsOdor / Almost odorlessRaise3D, Raise3D Hyper Speed ABS Technical Data Sheetp. 1

BigRep ABSStrength XY, MPa36Strength Z, MPa—Modulus XY, GPa1.4Charpy notched, kJ/m²30HDT 0.45, °C90HDT 1.8, °C75Price, CAD/kg—Nozzle, °C230–260Bed, °C80–110Chamber, °CenclosedDrying, °C, h804–6 h

BigRep ABSBigRep

Only 2.85 mm filament was found; the H2C takes 1.75 mm.

Published values

Property	As published	Conditions	On the Overview
BigRep, FILAMENT ABS9 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1400 MPap. 1: Tensile Modulus (ISO 527)	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	36 MPap. 1: Tensile Strength (ISO 527)	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1350 MPap. 1: Flexural Modulus (ISO 178)	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	48 MPap. 1: Flexural Strength (ISO 178)	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	40 kJ/m²p. 1: Impact Strength, Notched (ISO 179)	ISO 179	not in the median: another value of this product is in it
HDT at 0.45 MPa	90 °Cp. 1: HDT B - 0.45 MPa (ISO 75)	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
HDT at 1.8 MPa	75 °Cp. 1: HDT A - 1.8 MPa (ISO 75)	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	in the median
Glass transition temperature	109 °Cp. 1: Glass Transition Temperature (Tg) (DSC)	DSC As the sheet prints it: Tg DSC	in the median
Density	1.08 g/cm³p. 1: Density (ISO 1183)	ISO 1183
BigRep, ABS — Versatile and Impact-Resistant5 values
Tensile strength (yield or break not stated) orientation not stated	30 MPap. 2: Tensile Strength	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	10%p. 2: Elongation at Break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength orientation not stated	70 kJ/m²p. 2: Charpy Unnotched Impact Strength	ISO 179	not in the median: unnotched
Charpy impact strength orientation not stated	30 kJ/m²p. 2: Charpy Notched Impact Strength	ISO 179	in the median
Glass transition temperature	110 °Cp. 2: Glass Transition Temperature (Tg)	DSC	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding

Print settings

Nozzle: 230–260 °Cown data sheet
Bed: 80–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 4–6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle 230 - 260 °C; Bed 80 - 110 °C; Drying 80 °C for 4 - 6 hoursBigRep, FILAMENT ABSp. 1: Recommended printing settings; p. 1: Bed Temperature
Nozzle 230 - 260 °CBigRep, ABS — Versatile and Impact-Resistantp. 2: Nozzle Temperature; p. 2: Surface Adhesion

Price

Not in the price sample.

Its 3 documents

What the maker says (11)

Good forPrint complex, ready-to-use parts including end-use, factory tooling, and functional prototypes with demanding geometries.BigRep, ABS — Versatile and Impact-Resistantp. 1
BenefitsThe BigRep ABS filament is a popular FFF material trusted for its impact resistance, high heat deflection properties, and high-quality prints.BigRep, ABS — Versatile and Impact-Resistantp. 1
BenefitsThe material's strength, lightness, and durability make it a popular choice for both industrial manufacturing and 3D print enthusiasts.BigRep, ABS — Versatile and Impact-Resistantp. 1
Good forThis combination makes ABS a durable, lightweight material ideal for parts that are frequently used and/or subject to moderate impact and heat.BigRep, ABS — Versatile and Impact-Resistantp. 1
Moisture sensitivityABS is moderately hygroscopic.BigRep, ABS — Versatile and Impact-Resistantp. 2
Moisture sensitivityRecommended drying at 80 ∞C for 4 - 6 hours.BigRep, ABS — Versatile and Impact-Resistantp. 2
Moisture sensitivityKeep dry, avoid sunlight, and store at room temperature.BigRep, ABS — Versatile and Impact-Resistantp. 2
Moisture sensitivityWhen stored properly, product has a shelf life of 24 months.BigRep, ABS — Versatile and Impact-Resistantp. 2
Moisture sensitivityUse the BigRep Keep-Dry Box for best material printability.BigRep, ABS — Versatile and Impact-Resistantp. 2
Printing adviceKapton (additional adhesion using glue, e.g. Magigoo)BigRep, ABS — Versatile and Impact-Resistantp. 2
Printing adviceFan Speed 0 - 50%BigRep, ABS — Versatile and Impact-Resistantp. 2

Anycubic ABSStrength XY, MPa34Strength Z, MPa22Modulus XY, GPa2.2Charpy notched, kJ/m²—HDT 0.45, °C85HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C80–100Chamber, °CenclosedDrying, °C, h70–808–12 h

Anycubic ABSAnycubic

Published values

Property	As published	Conditions	On the Overview
Anycubic, Anycubic ABS13 values
Tensile modulus XY	2200 MPap. 1: Young's Modulus / MPa (X-Y)	ISO 527	in the median
Tensile strength (yield or break not stated) XY	34 MPap. 1: Tensile Strength / MPa (X-Y)	ISO 527	in the median
Tensile strength (yield or break not stated) Z	22 MPap. 1: Tensile Strength / MPa (Z)	ISO 527	in the median
Elongation at break XY	11 %p. 1: Elongation at Break / % (X-Y)	ISO 527	in the median
Flexural modulus XY	2200 MPap. 1: Bending Modulus / MPa (X-Y)	ISO 178	in the median
Flexural strength XY	63 MPap. 1: Bending Strength / MPa (X-Y)	ISO 178	in the median
Izod impact strength XY	40 kJ/m²p. 1: Izod Impact Strength (kJ/m²) (X-Y)	ISO 179	not in the median: notch not stated
HDT at 0.45 MPa	85 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃	ISO 75 As the sheet prints it: 0.45MPa ISO 75-2	in the median
Glass transition temperature	105 ℃p. 2: Glass Transition Temperature ISO 11357-1, 10℃/min ℃	ISO 11357 As the sheet prints it: ISO 11357-1	in the median
Vicat softening temperature	95 ℃p. 2: Vicat Softening Temperature (VST) ISO 306, 10N ℃	ISO 306 As the sheet prints it: VST 10N ISO 306
Density	1.05 g/cm3p. 1: Density/(g/cm³) ISO 1183,at 23°C g/cm3	ISO 1183 As the sheet prints it: at 23°C ISO 1183 tested at 23°C
Moisture content	0.25 %p. 1: Moisture Content ISO 787-2 %	ISO 787 As the sheet prints it: ISO 787-2
Melt mass-flow rate	32.1 ± 0.63 g/10minp. 1: Melt Index/ ( g/10min) ISO 1133 g/10min	ISO 1133 As the sheet prints it: g/10min ISO 1133

Print settings

Nozzle: 240–280 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 70–80 °C for 8–12 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240-280; Bed 80-100; Drying 70-80℃, 8-12hAnycubic, Anycubic ABSp. 2: Recommended printing settings; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Recommended Printing Parameters

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

BenefitsIt can withstand temperatures up to 85°C and is known for its high toughness and impressive printing success rates.Anycubic, Anycubic ABSp. 1
Warping and shrinkageAdditionally, it features enhanced anti-warping properties, which help prevent corner lifting, even when printing models with a size of 220mm x 220mm.Anycubic, Anycubic ABSp. 1

SUNLU High Speed ABSStrength XY, MPa35Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²10IzodHDT 0.45, °C93HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–290Bed, °C90–100Chamber, °CnoneDrying, °C, h50

SUNLU High Speed ABSSUNLU

Published values

Property	As published	Conditions	On the Overview
SUNLU, High Speed ABS12 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO High Speed ABS.
Tensile strength (yield or break not stated) XY	35 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa	ISO 527 As the sheet prints it: 50mm/min ISO527/2	not in the median: another value of this product is in it
Elongation at break XY	12 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min %	ISO 527 As the sheet prints it: 50mm/min ISO527/2	not in the median: another value of this product is in it
Flexural modulus XY	2100 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178	not in the median: another value of this product is in it
Flexural strength XY	55 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178	not in the median: another value of this product is in it
Izod impact strength XY	10 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2	ISO 180 As the sheet prints it: 23℃ ISO180 tested at 23°C	not in the median: another value of this product is in it
HDT at 0.45 MPa	91 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃	ISO 75 As the sheet prints it: 0.45MPa ISO75	not in the median: another value of this product is in it
Vicat softening temperature	80 ℃p. 1: Vicat Softening Temp. ISO306 5kg,50℃/h ℃also in SUNLU, TECHNICAL DATA SHEET ISO High Speed ABS	ISO 306 As the sheet prints it: 5kg ISO306
Melting temperature	128 ℃p. 1: Melting Point ISO11357-3 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO High Speed ABS	ISO 11357 As the sheet prints it: ISO11357-3
Decomposition temperature	398 ℃p. 1: @5%Decomposition Temp. ISO11358 20℃/min ℃	ISO 11358
Density	1.046 g/cm3p. 1: Density ISO1183 23℃ g/cm3	ISO 1183 As the sheet prints it: 23℃ ISO1183 tested at 23°C
Melt mass-flow rate	38 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min	ISO 1133 As the sheet prints it: 190℃/2.16kg ISO1133 tested at 190°C
Mould shrinkage orientation not stated	0.8 %p. 1: Mold Shrinkage ISO294 23℃ %	ISO 294 As the sheet prints it: 23℃ ISO294 tested at 23°C

SUNLU, TECHNICAL DATA SHEET ISO High Speed ABS11 valuesThe same values also in SUNLU, High Speed ABS.Unless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	35 ± 5 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 100-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Elongation at break XY	10 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min %	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 100-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Flexural modulus XY	2000 ± 200 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 100-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Flexural strength XY	55 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 100-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength XY	10 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 100-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength ZX	18 ± 3 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 100-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	not in the median: unnotched
Hardness	80 Shore Dp. 1: Shore Hardness ISO 868 23℃ HA/HDalso in SUNLU, High Speed ABS	ISO 868 As the sheet prints it: 23℃ HA/HD ISO 868 tested at 23°C	in the median
HDT XY, at 0.45 MPa	93 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
Glass transition temperature	105 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, High Speed ABS	ISO 11357 As the sheet prints it: ISO 11357-2	in the median
Density	1.046 ± 0.01 g/cm3p. 1: Density ISO 1183 23℃ g/cm3	specimen not stated, ISO 1183 As the sheet prints it: 23℃ ISO 1183 tested at 23°C
Melt mass-flow rate	38 ± 6 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 220℃/10 kg g/10 min	ISO 1133 As the sheet prints it: 220℃/10 kg ISO 1133 tested at 220°C

Print settings

Nozzle: 260–290 °Cown data sheet
Bed: 90–100 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 50 °Cown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle 260-280; 280-290; Bed 90-100℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO High Speed ABSp. 2: Recommended printing settings; p. 2: Nozzle Temp.
Nozzle 260-280; 280-290; Bed 90-100℃; Chamber Normal temperature; Drying 50℃SUNLU, High Speed ABSp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Material

Price

Not in the price sample.

Its 3 documents

What the maker says (6)

Good forOrnaments, toys, ornaments, handcraftsSUNLU, High Speed ABSp. 1
BenefitsGood heat resistance, high toughness and high strengthSUNLU, High Speed ABSp. 1
Warping and shrinkageno cracking, low warpingSUNLU, High Speed ABSp. 1
Supports and removalSupport Material PVASUNLU, High Speed ABSp. 2
BenefitsExcellent heat resistance, high toughness and strengthSUNLU, TECHNICAL DATA SHEET ISO High Speed ABSp. 1
Benefitssuitable for fast printing.SUNLU, TECHNICAL DATA SHEET ISO High Speed ABSp. 1

SUNLU ABSStrength XY, MPa35Strength Z, MPa—Modulus XY, GPa2.27Charpy notched, kJ/m²15IzodHDT 0.45, °C95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C80–100Chamber, °CnoneDrying, °C, h80

SUNLU ABSSUNLU

Published values

Property	As published	Conditions	On the Overview
SUNLU, Product Information ABS15 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO ABS.
Tensile modulus orientation not stated	2270 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa	ASTM D638 As the sheet prints it: 1mm/min ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	42 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa	ASTM D638 As the sheet prints it: 50mm/min ASTM D638	not in the median: another value of this product is in it
Elongation at break orientation not stated	7.8 %p. 1: Elongation at break ASTM D638 50mm/min %	ASTM D638 As the sheet prints it: 50mm/min ASTM D638	not in the median: another value of this product is in it
Flexural modulus orientation not stated	1829 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa	ASTM D790 As the sheet prints it: 2mm/min ASTM D790	not in the median: another value of this product is in it
Flexural strength orientation not stated	55 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa	ASTM D790 As the sheet prints it: 2mm/min ASTM D790	not in the median: another value of this product is in it
Izod impact strength	126 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m	ASTM D256 As the sheet prints it: 3.2mm 23℃ ASTM D256 tested at 23°C	not in the median: in J/m
HDT at 0.45 MPa	84 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃	ASTM D648 As the sheet prints it: 0.45MPa ASTM D648	not in the median: another value of this product is in it
Glass transition temperature	108.9 ℃p. 1: Glass Transition(Tg) ASTM D7426 10℃/min ℃	ASTM D7426	not in the median: another value of this product is in it
Vicat softening temperature	86 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃also in SUNLU, TECHNICAL DATA SHEET ISO ABS	ASTM D1525 As the sheet prints it: 5kg ASTM D1525
Melting temperature	132 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO ABS	ASTM D7426
Decomposition temperature	415 ℃p. 1: @5%Decomposition Temp. 20℃/min ℃	no standard stated
Density	1.04 g/cm3p. 1: Density ASTM D792 23℃ g/cm3	ASTM D792 As the sheet prints it: 23℃ ASTM D792 tested at 23°C
Melt mass-flow rate	17.9 g/10minp. 1: Melt Flow Rate ASTM D1238 220℃/10kg g/10min	ASTM D1238 As the sheet prints it: 220℃/10kg ASTM D1238 tested at 220°C
Mould shrinkage orientation not stated	0.4-0.9 %p. 1: Mold Shrinkage ASTM D955 23℃ %	ASTM D955 As the sheet prints it: 23℃ ASTM D955 tested at 23°C
Relative permittivity	2.64p. 1: Dielectric Constant	ASTM D150 As the sheet prints it: ASTM D150; frequency=1 kHz

SUNLU, TECHNICAL DATA SHEET ISO ABS11 valuesUnless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	35 ± 5 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 50-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Elongation at break XY	10 ± 5 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min %	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 50-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Flexural modulus XY	2000 ± 500 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 50-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Flexural strength XY	60 ± 10 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 50-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength XY	15 ± 5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 50-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength ZX	6 ± 3 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 50-200 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	not in the median: unnotched
Hardness	85 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD	ISO 868 As the sheet prints it: 23℃ HA/HD ISO 868 tested at 23°C	listed under other properties
HDT XY, at 0.45 MPa	95 ± 5 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
Glass transition temperature	109 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃	ISO 11357 As the sheet prints it: ISO 11357-2	in the median
Density	1.02 g/cm3p. 1: Density ISO 1183 23℃ g/cm3	specimen not stated, ISO 1183 As the sheet prints it: 23℃ ISO 1183 tested at 23°C
Melt mass-flow rate	20 ± 10 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 220℃/10 kg g/10 min	ISO 1133 As the sheet prints it: 220℃/10 kg ISO 1133 tested at 220°C

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 80 °Cown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 4 print profiles, in the documents' words

Nozzle 250-270; Bed 80-100℃; Chamber Room Temperature; Drying 80℃SUNLU, TECHNICAL DATA SHEET ISO ABSp. 2: Recommended printing settings; p. 2: Nozzle temperature, 50-100mm/s
Nozzle Print Temp. 250-260℃; Bed 80-100℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information ABSp. 2: Recommended printing settings; p. 2: Room Temp.
Nozzle 260-280℃; Bed 80-100℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information ABSp. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s
Nozzle 270-290; Bed 80-100℃; Chamber Room Temperature; Drying 80℃SUNLU, TECHNICAL DATA SHEET ISO ABSp. 2: Recommended Printing Parameters: Nozzle temperature, 100-200mm/s

Price

Not in the price sample.

Its 3 documents

What the maker says (2)

BenefitsStrong impact resistance and excellent durabilitySUNLU, TECHNICAL DATA SHEET ISO ABSp. 1
BenefitsHigh impact resistance, excellent durabilitySUNLU, Product Information ABSp. 1

3DJake ABSStrength XY, MPa49Strength Z, MPa—Modulus XY, GPa2.35Charpy notched, kJ/m²20HDT 0.45, °C—HDT 1.8, °C79Price, CAD/kg—Nozzle, °C220–250Bed, °C100–110Chamber, °CenclosedDrying, °C, h6010 h

3DJake ABS3DJake

Data sheet shared with Extrudr DURAPRO ABS: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
3DJake, Technical Data Sheet 3DJAKE ABS7 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2350 MPap. 1: Tensile E-Modulus	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	49 MPap. 1: Tensile strength	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	10 %p. 1: Elongation at break	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	5 %p. 1: Elongation at yield	ASTM D638	listed under other properties
Flexural modulus orientation not stated	2550 MPap. 1: Flexural E-Modulus	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	78 MPap. 1: Flexural Strength	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	92 °Cp. 1: VICAT A (VST)	ASTM D792

Print settings

Nozzle: 220–250 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureExtrudr DURAPRO ABS's data sheet, shared
Drying: 60 °C for 10 hExtrudr DURAPRO ABS's data sheet, shared
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 220 – 250 °C; Bed ± 100 – 110 ˚C3DJake, Technical Data Sheet 3DJAKE ABSp. 1: Recommended printing settings

Price

Not in the price sample.

Its 2 documents

Extrudr DURAPRO ABSStrength XY, MPa46Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²20HDT 0.45, °C—HDT 1.8, °C79Price, CAD/kg—Nozzle, °C220–250Bed, °C100–110Chamber, °CenclosedDrying, °C, h6010 h

Extrudr DURAPRO ABSExtrudr

Data sheet shared with 3DJake ABS: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Extrudr, TECHNICAL DATA SHEET DURAPRO ABS14 valuesThe same values also in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ABS.Unless a row says otherwise: moulded bar (resin supplier's value)
Tensile modulus	2350 MPap. 1: Tensile modulus (E-Modulus) ASTM D638 MPa	ASTM D638	not in the median: measured on a moulded bar
Tensile strength (yield or break not stated)	49 MPap. 1: Tensile strength ASTM D638 MPa	ASTM D638	not in the median: measured on a moulded bar
Elongation at break	10 %p. 1: Nominal elongation at break ASTM D638 %	ASTM D638	not in the median: measured on a moulded bar
Elongation at yield	5 %p. 1: Elongation at yield ASTM D638 %	ASTM D638	listed under other properties
Flexural modulus	2550 MPap. 1: Flexural modulus (E-Modulus) ASTM D790 MPa	ASTM D790	not in the median: measured on a moulded bar
Flexural strength	78 MPap. 1: Flexural strength ASTM D790 MPa	ASTM D790	not in the median: measured on a moulded bar
Izod impact strength	220 kj/m²physically implausiblep. 1: Notched impact strength ASTM D256 kj/m²	ASTM D256tested at 23°C	not in the median: physically implausible as published
Izod impact strength	held back: the sheet's unit or table layout is unclearheld backp. 1: Unnotched impact strength ASTM D256 kj/m²	ASTM D256tested at -30°C	not in the median: held back
Hardness	110 Rockwell Rp. 1: Hardness Rockwell ASTM D785 R-Skala	ASTM D785	listed under other properties
HDT at 0.45 MPa	85 °Cp. 1: HDT/B ASTM D648 °Calso in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ABS	ASTM D648 As the sheet prints it: HDT B ASTM D648	not in the median: measured on a moulded bar
Vicat softening temperature	92 °Cp. 1: VICAT A (VST) ASTM D1525 °Calso in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ABS	ASTM D1525
Melting temperature	180-200 °Cp. 1: Melting temperature ISO 3146-C °C	ISO 3146 As the sheet prints it: ISO 3146-C
Density	1.06 g/cm³p. 1: Density ASTM D792 g/cm³	ASTM D792
Mould shrinkage orientation not stated	0,4 %p. 1: Shrinking	specimen not stated, ASTM D955

Extrudr, DURAPRO ABS official maker product page13 values
Tensile modulus orientation not stated	2300 MPap. 1: Tensile modulus (Young's modulus)	ISO 527 As the sheet prints it: ISO 527-1	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	46 MPap. 1: Tensile strength at yield	ISO 527 As the sheet prints it: ISO 527-1	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2300 MPap. 1: Flexural modulus	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	70 MPap. 1: Flexural strength	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength orientation not stated	20 kJ/m²p. 1: Charpy notched impact strength (+23°C)	ISO 179 As the sheet prints it: ISO 179-1eA; notched tested at +23 °C	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength orientation not stated	10 kJ/m²p. 1: Charpy notched impact strength (-30°C)	ISO 179 As the sheet prints it: ISO 179-1eA; notched tested at -30 °C	not in the median: tested below room temperature
HDT at 1.8 MPa	79 °Cp. 1: Heat deflection temp. (HDT/A) — 1.8 MPa	ISO 75 As the sheet prints it: ISO 75-1; 1.8 MPa	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	~105 °Cp. 1: Glass transition temp. (Tg)	ISO 11357 As the sheet prints it: ISO 11357-1 (DSC)	in the median
Vicat softening temperature	94 °Cp. 1: Vicat softening temp. (VST/B50)	ISO 306 As the sheet prints it: ISO 306 (VST/B50)
Decomposition temperature	> 250 °Cp. 1: Thermal decomposition temp.	no standard stated
Density	1.05 g/cm³p. 1: Density	ISO 1183 As the sheet prints it: ISO 1183-1
Water absorption	1 %p. 1: Water absorption (saturation, 23°C)	no standard named As the sheet prints it: saturation tested at 23 °C
Melt volume-flow rate	23 cm³/10 minp. 1: Melt volume rate (MVR) — 235°C/5.0 kg	no standard named As the sheet prints it: 5.0 kg tested at 235 °C

Print settings

Nozzle: 220–250 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 60 °C for 10 hown data sheet
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 220-250°C; Bed 100-110°CExtrudr, TECHNICAL DATA SHEET DURAPRO ABSp. 1: Recommended printing settings
Nozzle 220–250 °C; Bed 100–110 °C; Drying Drying temperature 60 °C; Drying time 10 hExtrudr, DURAPRO ABS official maker product pagep. 1: Exact product drying table and own nozzle recommendation; other recipe fields not transcribed in this scoped profile; p. 1: Nozzle temperature; p. 1: Build plate temperature; p. 1: Surface preparation; p. 1: Enclosed chamber required; p. 1: Hardened nozzle required
Nozzle 220-250°C; Bed 100-110°CExtrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ABSp. 1: Buse; p. 1: Plateau chauffant; p. 1: Paramètres recommandés

Price

Not in the price sample.

Its 4 documents

What the maker says (7)

Good forIt is ideal for the production of mechanically highly stressed components.Extrudr, TECHNICAL DATA SHEET DURAPRO ABSp. 1
Warping and shrinkageShrinking ASTM D955 % 0,4Extrudr, TECHNICAL DATA SHEET DURAPRO ABSp. 1
Warping and shrinkageLow shrinking and warpingExtrudr, TECHNICAL DATA SHEET DURAPRO ABSp. 1
Adhesion between layersDuraPro ABS is optimised for good layer adhesion, thermal stability, better flow properties and low warping.Extrudr, TECHNICAL DATA SHEET DURAPRO ABSp. 1
Adhesion between layersExcellent layer and bed adhesionExtrudr, TECHNICAL DATA SHEET DURAPRO ABSp. 1
Pitfalls and limitationsDuraPro ABS is not recommended for long-term or permanent outdoor use. Like standard ABS, it is prone to UV degradation, which can cause yellowing, brittleness, and reduced mechanical performance over time with prolonged sun exposure. For outdoor applications, consider DuraPro ASA, which is specifically formulated for improved UV resistance.Extrudr, DURAPRO ABS official maker product pagep.1: Exact product FAQ/highlight, source text line112
Pitfalls and limitationsDuraPro ABS is compliant with FDA, REACH, and RoHS standards. Any printed item intended for food contact needs to be separately certified.Extrudr, DURAPRO ABS official maker product pagep.1: Exact product FAQ/highlight, source text line115

3DXTECH 3DXMAX ABSStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa1.95Charpy notched, kJ/m²—HDT 0.45, °C95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

3DXTECH 3DXMAX ABS3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: 3DXMAX® ABS 3D Printing Filament8 valuesUnless a row says otherwise: printed specimen print settings Printed Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 225°C Bed Temp: 110°C Specimen Orientation: XY Flat
Tensile modulus XY	1950 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	in the median
Tensile break strength XY	42 MPap. 1: Tensile Strength, Break ISO 527 MPa	ISO 527	in the median
Elongation at break XY	10 %p. 1: Tensile Elongation, Break ISO 527 %	ISO 527	in the median
Flexural modulus XY	1985 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	in the median
Flexural strength XY	76 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	in the median
HDT at 0.45 MPa	95 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C	ISO 75 As the sheet prints it: ISO 75, 0.45 MPa (66psi)	in the median
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature (Tg) DSC °C	DSC As the sheet prints it: Tg DSC °C	in the median
Density	1.05 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183 As the sheet prints it: 1183 g/cc ISO 1183

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

No temperature stated3DXTECH, Technical Data Sheet: 3DXMAX® ABS 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance

Price

Not in the price sample.

Its 2 documents

3DXTECH Triton ABS Model MaterialStrength XY, MPa30Strength Z, MPa—Modulus XY, GPa2.21Charpy notched, kJ/m²—HDT 0.45, °C96HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °C—Drying, °C, h804 h

3DXTECH Triton ABS Model Material3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: Triton™ ABS Model Material8 values
Tensile modulus XY	2205 MPap. 1: Tensile Modulus	ISO 527	in the median
Tensile break strength XY	30 MPap. 1: Tensile Strength, Break	ISO 527	in the median
Elongation at break XY	4.5 %p. 1: Tensile Elongation, Break	ISO 527	in the median
Flexural modulus XY	1910 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	in the median
Flexural strength XY	54 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	in the median
HDT at 0.45 MPa	96 °Cp. 1: Deflection Temperature at 0.45 MPa (66psi)	ISO 75 As the sheet prints it: ISO 75; 0.45 MPa	in the median
Glass transition temperature	104 °Cp. 1: Glass Transition Temperature DSC °C	no standard stated	in the median
Density	1.05 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: recommendedown data sheet
Drying: 80 °C for 4 hown data sheet
Hardened nozzle: not neededown data sheet

Its print profile, in the documents' words

Chamber Recommended; Drying 80C for 4 hours3DXTECH, TRITON3D™ ABS - Stratasys® Compatiblep. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Printing adviceEasier to print than most industrial-grade materials3DXTECH, TRITON3D™ ABS - Stratasys® Compatiblep. 1

Raise3D Premium ABSStrength XY, MPa33Strength Z, MPa—Modulus XY, GPa2.17Charpy notched, kJ/m²—HDT 0.45, °C98HDT 1.8, °C—Price, CAD/kg46Nozzle, °C245–265Bed, °C90–105Chamber, °C20–50Drying, °C, h808 h

Raise3D Premium ABSRaise3D

Published values

Property	As published	Conditions	On the Overview
Raise3D, Raise3D Premium ABS Technical Data Sheet13 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	2174 ±285 MPap. 1: Young’s modulus (MPa, X-Y)	ISO 527, GB/T 1040 As the sheet prints it: ISO 527, GB/T 1040; nozzle=255°C; speed=60 mm/s; bed=100°C; infill=100%	in the median
Tensile strength (yield or break not stated) XY	33 ±1 MPap. 1: Tensile strength (MPa, X-Y)	ISO 527, GB/T 1040 As the sheet prints it: ISO 527, GB/T 1040; nozzle=255°C; speed=60 mm/s; bed=100°C; infill=100%	in the median
Elongation at break XY	2.7 ±0.4 %p. 1: Elongation at break (%, X-Y)	ISO 527, GB/T 1040 As the sheet prints it: ISO 527, GB/T 1040; nozzle=255°C; speed=60 mm/s; bed=100°C; infill=100%	in the median
Flexural modulus orientation not stated	2850 ±300 MPap. 1: Bending modulus (MPa)	ISO 178, GB/T 9341 As the sheet prints it: ISO 178, GB/T 9341; nozzle=255°C; speed=60 mm/s; bed=100°C; infill=100%	in the median
Flexural strength orientation not stated	73 ±1 MPap. 1: Bending strength (MPa)	ISO 178, GB/T 9341 As the sheet prints it: ISO 178, GB/T 9341; nozzle=255°C; speed=60 mm/s; bed=100°C; infill=100%	in the median
Charpy impact strength orientation not stated	12.6 ±1.1 kJ/m²p. 1: Charpy Impact strength (kJ/m²)	ISO 179, GB/T 1043 As the sheet prints it: ISO 179, GB/T 1043; nozzle=255°C; speed=60 mm/s; bed=100°C; infill=100%	not in the median: notch not stated
HDT at 0.45 MPa	98 °Cp. 1: Heat distortion temperature	ISO 75 As the sheet prints it: ISO 75 0.45MPa	in the median
Glass transition temperature	101 °Cp. 1: Glass transition temperature	no standard stated	in the median
Vicat softening temperature	104 °Cp. 1: Vicat Softening temperature	ISO 306, GB/T 1633
Continuous service temperature	-20 - 90 °Cp. 1: Long-term service temp. (°C)	no standard stated
Decomposition temperature	380 °Cp. 1: Decomposition temperature	no standard stated
Density	1.12 g/cm³p. 1: Density (g/cm³ at 23 °C)	ISO 1183, GB/T 1033tested at 23 °C
Melt mass-flow rate	9-14 g/10 minp. 1: Melt index (g/10 min)	specimen not stated, no standard named As the sheet prints it: 2.16 kg tested at 220 °C

Print settings

Nozzle: 245–265 °Cown data sheet
Bed: 90–105 °Cown data sheet
Heated chamber: 20–50 °Cown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle (˚C) 245 - 265; Bed (°C) 90 - 105; Chamber 20 - 50Raise3D, Raise3D Premium ABS Technical Data Sheetp. 2: Recommended printing settings: Nozzle temperature; p. 2: Recommended environmental temperature; p. 2: Build Surface material; p. 2: Note 1

Price

46 CAD/kgthe median of its 2 regular prices in the sample

2 listings

DigitMakers: 46 CAD/kgRaise3D Premium ABS Filament 1.75mm 1kg Spool / White / 1.75mm (SKU RAISE3D-FL-ABS-1.75-1KG-WHT)in its price; seen 30 Sep 2026
Shop3D.ca: 46 CAD/kgRaise3D Premium ABS Filament - 1.75mm (1kg) / Black (SKU [S]5.11.19103A01)in its price; seen 30 Sep 2026

Its 2 documents

What the maker says (2)

Warping and shrinkageIt offers superior printing quality, excellent mechanical strength and heat resistance, with great warping resistance and interlayer bonding quality.Raise3D, Raise3D Premium ABS Technical Data Sheetp. 1
Odour and emissionsOdor / Almost odorlessRaise3D, Raise3D Premium ABS Technical Data Sheetp. 1

Fillamentum ABS ExtrafillStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²25HDT 0.45, °C—HDT 1.8, °C81Price, CAD/kg—Nozzle, °C220–240Bed, °C80–105Chamber, °CenclosedDrying, °C, h802 h

Fillamentum ABS ExtrafillFillamentum

Published values

Property	As published	Conditions	On the Overview
Fillamentum, ABS Extrafill10 valuesUnless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	39 MPap. 1: Tensile strength (39 MPa)	ISO 527 As the sheet prints it: ISO 527; rate=50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	32 MPap. 1: Tensile strength (32 MPa)	ISO 527 As the sheet prints it: ISO 527; rate=50 mm/min	not in the median: another value of this product is in it
Elongation at break orientation not stated	20 %p. 1: Elongation at break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1900 MPap. 1: Flexural modulus	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	60 MPap. 1: Flexural strength	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	25 kJ/m2p. 1: Charpy impact strength	ISO 179notched	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	24 kJ/m2p. 1: Izod impact strength	ISO 180 As the sheet prints it: ISO 180-1A notched	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	81 °Cp. 1: Heat deflection temperature	ISO 75 As the sheet prints it: ISO 75-A 1,8 MPa	in the median
Vicat softening temperature	103 °Cp. 1: Vicat softening temperature	ISO 306
Density	1,04 g/cm3p. 1: Material density	ISO 1183

Print settings

Nozzle: 220–240 °Cown data sheet
Bed: 80–105 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 2 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle 220–240 °C; Bed 80–105 °CFillamentum, ABS Extrafillp. 1: Recommended printing settings; p. 1: Adhesive
Drying 2 h, 80 °CFillamentum, Drying of filaments before processing on 3D printerp. 2: ABS EXTRAFILL

Price

Not in the price sample.

Its 3 documents

What the maker says (3)

Good forABS filament is suitable for the production of the first samples before serial production for functional prototyping, manufacturing tools, but also for the production of goods for everyday use.Fillamentum, ABS Extrafillp. 1
Printing adviceABS EXTRAFILL: 2 h; 80 °C; 2Fillamentum, Drying of filaments before processing on 3D printerp.2 Table1 own product row ABS EXTRAFILL
Moisture sensitivityABS EXTRAFILL 2 h 80 °C 2 process instabilityFillamentum, Drying of filaments before processing on 3D printerp. 2

FormFutura ClearScent ABSStrength XY, MPa39.2Strength Z, MPa—Modulus XY, GPa1.9Charpy notched, kJ/m²17IzodHDT 0.45, °C—HDT 1.8, °C82Price, CAD/kg—Nozzle, °C220–260Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

FormFutura ClearScent ABSFormFutura

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet ClearScent™ ABS10 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1900 Mpap. 1: Tensile modulus ±	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	39.2 Mpap. 1: Tensile strength	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	35 %p. 1: Elongation at break	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1833 Mpap. 1: Flexural modulus	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	60.8 Mpap. 1: Flexural strength	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	17 KJ/m²p. 1: Impact strength	ISO 180 As the sheet prints it: ISO 180/A tested at 23° C (73° F)notched	not in the median: set apart (never used to pass), test bar not described as printed
Hardness	100 Rockwell Rp. 1: Hardness	ASTM D785	listed under other properties
HDT at 1.8 MPa	82° C °Cp. 1: Viscat softening temp.	ASTM D648 As the sheet prints it: ASTM D648; 6.4mm, 18.6Kg (Unannealed) as printed Unannealed	in the median
Density	1.06 g/ccp. 1: Specific gravity	ASTM D792
Melt mass-flow rate	12.0 g/10minp. 1: Melt flow rate	ASTM D1238

Print settings

Nozzle: 220–260 °Cown data sheet
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle ± 220 - 260° CFormFutura, Technical Data Sheet ClearScent™ ABSp. 1: Recommended printing settings

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

BenefitsBy being slightly modified unique features like — a transparency of 90%, very limited warping, great thermal stability and flowing behaviour — are obtained with ClearScent™ ABS and still ClearScent™ ABS is much more impact resistant than many other 3D printer filaments.FormFutura, Technical Data Sheet ClearScent™ ABSp. 1
Odour and emissionsWhen 3D printed, ClearScent™ ABS is almost odourless compared to “normal” ABS, because it only contains a very low percentage of Butadiene.FormFutura, Technical Data Sheet ClearScent™ ABSp. 1

3D4Makers ABSStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa2.28Charpy notched, kJ/m²20HDT 0.45, °C—HDT 1.8, °C100Price, CAD/kg—Nozzle, °C220–260Bed, °C90–110Chamber, °CenclosedDrying, °C, h808 h

3D4Makers ABS3D4Makers

Published values

Property	As published	Conditions	On the Overview
3D4Makers, Technical data sheet 3D printing filament ABS Filament11 values
Tensile modulus orientation not stated	2280 MPap. 1: Tensile modulus 3.20 mm, ISO 527-2	ISO 527 As the sheet prints it: 3.20 mm ISO 527-2	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	45.0 MPap. 1: Tensile Stress Yield, 3.20 mm ISO 527-2/50	ISO 527 As the sheet prints it: 3.20 mm ISO 527-2/50	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	2.5 %p. 1: Tensile Strain	ISO 527 As the sheet prints it: ISO 527-2/50; thickness=3.20 mm; yield	listed under other properties
Flexural modulus orientation not stated	2300 MPap. 1: Flexural Modulus 3.20 mm ISO 178	ISO 178 As the sheet prints it: 3.20 mm ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	68.0 MPap. 1: Flexural Strength 3.20 mm ISO 178	ISO 178 As the sheet prints it: 3.20 mm ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	20 kJ/m2p. 1: Charpy Notched Impact Strength 23 °C ISO 179 1eA	ISO 179 As the sheet prints it: 23 °C 1eA ISO 179 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	19 kJ/m2p. 1: Notched Izod Impact Strength 23 °C ISO 180/A	ISO 180 As the sheet prints it: 23 °C ISO 180/A tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	100 °Cp. 1: Heat Deflection Temperature 1.8 MPa, Unannealed ISO 75-2/A	ISO 75 As the sheet prints it: 1.8 MPa ISO 75-2/A as printed Unannealed	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	97.0 °Cp. 1: Vicat Softening Temperature ISO 306/B50	ISO 306 As the sheet prints it: ISO 306/B50
Density	1.05 g/cm3p. 1: Density ISO 1183/B	ISO 1183 As the sheet prints it: ISO 1183/B
Mould shrinkage orientation not stated	0.40-0.70 %transcription correctedp. 1: Molding Shrinkage-Flow ISO 294-4 0.40 to	ISO 294 As the sheet prints it: ISO 294-4

Print settings

Nozzle: 220–260 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 220 - 260 °C; Bed 90 - 110 °C3D4Makers, Technical data sheet 3D printing filament ABS Filamentp. 2: Recommended printing settings; p. 2: Bed Adhesion

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

BenefitsABS is a strong material with high toughness and impact resistance.3D4Makers, Technical data sheet 3D printing filament ABS Filamentp. 1
Pitfalls and limitationsIt is also subject to ageing by being exposed to the weather conditions (UV light, oxygen, moisture, heat) because Polybutadiene stimulates the oxidation of Polystyrene.3D4Makers, Technical data sheet 3D printing filament ABS Filamentp. 1
Pitfalls and limitationsThis causes discolouration and the plastic loses its mechanical strength.3D4Makers, Technical data sheet 3D printing filament ABS Filamentp. 1
Printing adviceOur experience while printing with the 3D4MAKERS ABS Filament is that it gives better results when used at higher temperatures than other ABS Filaments.3D4Makers, Technical data sheet 3D printing filament ABS Filamentp. 2

Creality Hyper-ABSStrength XY, MPa27Strength Z, MPa—Modulus XY, GPa2.02Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–300Bed, °C70–90Chamber, °C0–50Drying, °C, h808 h

Creality Hyper-ABSCreality

Published values

Property	As published	Conditions	On the Overview
Creality, Hyper-ABS Filament Technical Data Sheet10 values
Tensile modulus XY	2020 ± 45 Mpap. 1: Tensile modulus (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	27.0 ± 1.2 MPap. 1: Tensile strength (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Elongation at break XY	7.63 ± 3.3 %p. 1: Elongation at break (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Flexural modulus XY	2035 ± 50 MPap. 1: Bending modulus (X-Y) ISO 179, GB/T 1043	ISO 179, GB/T 1043	in the median
Flexural strength XY	92.38 MPap. 1: Bending strength (X-Y) ISO 178, GB/T 9341	ISO 178, GB/T 9341	in the median
Charpy impact strength Z	13.2 ± 1 kJ/m2p. 1: Charpy impact strength (Z) ISO 179, GB/T 1043	ISO 179, GB/T 1043	not in the median: notch not stated
Glass transition temperature	81 °Cp. 1: Glass transition temperature DSC, 10°C/min	DSC	in the median
Vicat softening temperature	84.6 °Cp. 1: Vicat Softening temperature	no standard stated
Density	1.04 g/cm3p. 1: Density	no standard stated
Melt mass-flow rate	3-5 g/10minp. 1: Melt index 190°C, 2.16kg	no standard named As the sheet prints it: 190°C 2.16kg tested at 190°C

Print settings

Nozzle: 240–300 °Cown data sheet
Bed: 70–90 °Cown data sheet
Heated chamber: 0–50 °Cown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 - 300°C; Bed 70 - 90°C; Chamber 0-50°CCreality, Hyper-ABS Filament Technical Data Sheetp. 1: Recommended printing settings; p. 1: Hot Bed Temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

Good forIt can also be used in environments with higher temperature requirements.Creality, Hyper-ABS Filament Technical Data Sheetp. 1
BenefitsHyper ABS has excellent fluidity, making 3D printing faster and more efficient.Creality, Hyper-ABS Filament Technical Data Sheetp. 1
Odour and emissionsIt releases fewer volatiles, protects your health, and supports open printing.Creality, Hyper-ABS Filament Technical Data Sheetp. 1

SUNLU ABS-FRStrength XY, MPa31.4Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²13.7IzodHDT 0.45, °C91HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C80–100Chamber, °CnoneDrying, °C, h50

SUNLU ABS-FRSUNLU

Modified: undisclosed dense filler. Its values are kept out of the material's medians.

Published values

Property	As published	Conditions	On the Overview
SUNLU, ABS FR12 valuesThe same values also in SUNLU, 三绿物性表 ISO ABS 阻燃(ABS-FR).
Tensile strength (yield or break not stated) XY	33 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa	ISO 527 As the sheet prints it: 50mm/min ISO527/2	not in the median: another value of this product is in it
Elongation at break XY	10 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min %	ISO 527 As the sheet prints it: 50mm/min ISO527/2	not in the median: another value of this product is in it
Flexural modulus XY	2154 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178	not in the median: another value of this product is in it
Flexural strength XY	54 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178	not in the median: another value of this product is in it
Izod impact strength XY	13 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2	ISO 180 As the sheet prints it: 23℃ ISO180 tested at 23°C	not in the median: another value of this product is in it
Izod impact strength ZX	20 KJ/m2p. 1: IZOD Impact Notched (Z-X) ISO180 23℃ KJ/m2	ISO 180 As the sheet prints it: Z-X 23℃ ISO180 tested at 23°C	not in the median: measured on a bar in another orientation
HDT at 0.45 MPa	84 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃	ISO 75 As the sheet prints it: 0.45MPa ISO75	not in the median: another value of this product is in it
Melting temperature	132 ℃p. 1: Melting Point ISO11357-3 10℃/min ℃also in SUNLU, 三绿物性表 ISO ABS 阻燃(ABS-FR)	ISO 11357 As the sheet prints it: ISO11357-3
Decomposition temperature	375 ℃p. 1: @5%Decomposition Temp. ISO11358 20℃/min ℃	ISO 11358
Density	1.10 g/cm3p. 1: Density ISO1183 23℃ g/cm3	ISO 1183 As the sheet prints it: 23℃ ISO1183 tested at 23°C
Melt mass-flow rate	1.7 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min	ISO 1133 As the sheet prints it: 190℃/2.16kg ISO1133 tested at 190°C
Mould shrinkage orientation not stated	0.4-0.9 %p. 1: Mold Shrinkage ISO294 23℃ %	ISO 294 As the sheet prints it: 23℃ ISO294 tested at 23°C

SUNLU, 三绿物性表 ISO ABS 阻燃(ABS-FR)10 values
Tensile strength (yield or break not stated) XY	31.4 ± 4 MPap. 1: 拉伸强度(X-Y) Tensile Strength ISO 527/2 50 mm/min MPa	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings 测试样条打印速度 45 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。	not in the median: added filler or additive
Elongation at break XY	11.6 ± 2 %p. 1: 断裂伸长率(X-Y) Elongation at break ISO 527/2 50 mm/min %	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings 测试样条打印速度 45 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。	not in the median: added filler or additive
Flexural modulus XY	1750 ± 200 MPap. 1: 弯曲模量(X-Y) Flexural Modulus ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings 测试样条打印速度 45 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。	not in the median: added filler or additive
Flexural strength XY	55 ± 5 MPap. 1: 弯曲强度(X-Y) Flexural Strength ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings 测试样条打印速度 45 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。	not in the median: added filler or additive
Izod impact strength XY	13.7 ± 3 KJ/m2p. 1: 悬臂梁缺口冲击强度 (X-Y) Izod Impact ISO 180 23℃ KJ/m2 Strength of Notched Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180 tested at 23°C print settings 测试样条打印速度 45 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。	not in the median: added filler or additive
Izod impact strength ZX	3.9 ± 1.5 KJ/m2p. 1: 悬臂梁无缺口冲击强度(Z-X) Izod Impact ISO 180 23℃ KJ/m2 Strength of Unnotched Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180 tested at 23°C print settings 测试样条打印速度 45 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。	not in the median: unnotched
Hardness	79 Shore (scale not specified by source)p. 1: 邵氏硬度 Shore Hardness ISO 868 23℃ HA/HD	ISO 868 As the sheet prints it: 23℃ HA/HD ISO 868 tested at 23°C	listed under other properties
HDT XY, at 0.45 MPa	90.5 ± 3 ℃p. 1: 热变形温度(X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	not in the median: added filler or additive
Density	1.15 g/cm3p. 1: 密度 Density ISO 1183 23℃ g/cm3	ISO 1183 As the sheet prints it: 23℃ ISO 1183 tested at 23°C
Melt mass-flow rate	28.6 ± 3 g/10 minp. 1: 熔体指数 Melt Mass-flow Rate ISO 1133 220℃/10 kg g/10 min	ISO 1133 As the sheet prints it: 220℃/10 kg ISO 1133 tested at 220°C

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 50 °Cown data sheet
Hardened nozzle: not stated

Its 2 print profiles, in the documents' words

Nozzle 240-250; 250-260; Bed 80-100℃; Chamber Normal temperature; Drying 50℃SUNLU, ABS FRp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Print Platform Material
Nozzle 240-250; 250-260; Bed 80-100℃; Chamber 常温; Drying 80℃SUNLU, 三绿物性表 ISO ABS 阻燃(ABS-FR)p. 2: 喷嘴温度 Nozzle Temp., 平台温度 Plate Temp.; p. 2: Plate Material; p. 2: Drying Temp.

Price

Not in the price sample.

Its 3 documents

What the maker says (3)

Good forOrnaments, toys, ornaments, handcraftsSUNLU, ABS FRp. 1
Odour and emissionsPrinting smells and requires ventilationSUNLU, ABS FRp. 1
Supports and removalSupport Material PVASUNLU, ABS FRp. 2

AzureFilm ABS PrimeStrength XY, MPa30.9Strength Z, MPa11.5Modulus XY, GPa1.6Charpy notched, kJ/m²—HDT 0.45, °C97HDT 1.8, °C—Price, CAD/kg—Nozzle, °C235–255Bed, °C90Chamber, °C—Drying, °C, h—

AzureFilm ABS PrimeAzureFilm

Modified: undisclosed dense filler. Its values are kept out of the material's medians.

Sold as toughened or impact-modified: "Due to our enhanced formulation, ABS Prime has exceptional strength with an increased impact resistance and excellent interlayer adhesion." (AzureFilm, Technical Data Sheet 04.24 ABS Prime, p. 1). The maker's statement, not a test result.

Published values

Property	As published	Conditions	On the Overview
AzureFilm, Technical Data Sheet 04.24 ABS Prime15 valuesUnless a row says otherwise: printed specimen print settings 100% infill; 2 shells; layer height of 0.2mm
Tensile modulus XY	1600 MPap. 1: Tensile Modulus (XY)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile modulus Z (ZX)	1400 MPap. 1: Tensile Modulus (ZX)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile modulus XZ	1600 MPap. 1: Tensile Modulus (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) XY	30.9 MPap. 1: Tensile Strength (XY)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile strength (yield or break not stated) Z (ZX)	11.5 MPap. 1: Tensile Strength (ZX)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile strength (yield or break not stated) XZ	33.5 MPap. 1: Tensile Strength (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile yield strength XY	25.2 MPap. 1: Yield Strength (XY)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: another value of this product is in it
Tensile yield strength XZ	26.6 MPap. 1: Yield Strength (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Flexural modulus XY	1600 MPap. 1: Flexural Modus (XY)	ISO 178	not in the median: added filler or additive
Flexural modulus XZ	1700 MPap. 1: Flexural Modus (XZ)	ISO 178	not in the median: measured on a bar in another orientation
Charpy impact strength XY	55.5 kJ/m²p. 1: Impact Strength	ISO 179print settings not stated	not in the median: notch not stated
HDT	97 °Cp. 1: Heat deflect. temp.	specimen not stated; its document points to a moulded or resin bar, ISO 75print settings not stated	not in the median: added filler or additive
Melting temperature	235 ± 10 °Cphysically implausiblep. 1: Melting temp. ISO 294	specimen not stated, ISO 294print settings not stated
Density	1.13 g/ccp. 1: Specific gravity ISO 1133	specimen not stated, ISO 1133print settings not stated
Melt volume-flow rate	39 cm³/10 minp. 1: Melt flow rate	specimen not stated, ISO 1133print settings not stated

Print settings

Nozzle: 235–255 °Cown data sheet
Bed: 90 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 245±10 °C; Bed 90 °CAzureFilm, Technical Data Sheet 04.24 ABS Primep. 1: Bed temp.; p. 1: Bed surface; p. 1: Printing temp.

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

Warping and shrinkageABS Prime is our high-end zero warp engineering filament, based on regular ABS.AzureFilm, Technical Data Sheet 04.24 ABS Primep. 1
Precision and toleranceWith ABS Prime you will create precise, detailed prints that are both durable and have a beautiful surface finish.AzureFilm, Technical Data Sheet 04.24 ABS Primep. 1
Adhesion between layersDue to our enhanced formulation, ABS Prime has exceptional strength with an increased impact resistance and excellent interlayer adhesion.AzureFilm, Technical Data Sheet 04.24 ABS Primep. 1

Fiberlogy EASY ABSStrength XY, MPa44Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²16IzodHDT 0.45, °C—HDT 1.8, °C70Price, CAD/kg—Nozzle, °C235–255Bed, °C90–110Chamber, °CenclosedDrying, °C, h604 h

Fiberlogy EASY ABSFiberlogy

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY ABS6 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile yield strength orientation not stated	44 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	45 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2000 MPap. 1: Flexular Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	64 MPap. 1: Flexular Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	16 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	70 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
Fiberlogy, Easy ABS Filament2 valuesUnless a row says otherwise: specimen not stated
Izod impact strength orientation not stated	16 kJ/m²p. 1: Izod impact strength (notched) @ 23°C	ISO 180tested at 23°C	not in the median: another value of this product is in it
Density	1.09 g/cm³p. 1: Density	no standard stated

Print settings

Nozzle: 235–255 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 60 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, Easy ABS Filament.

Its 2 print profiles, in the documents' words

Nozzle 235°C - 255°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY ABSp. 1: Recommended printing settings
Nozzle 235–255°C; Bed 100°C; Drying 60°C / 4 hoursFiberlogy, Easy ABS Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Printing advicewithout the need for specialized enclosed-chamber printersFiberlogy, Easy ABS Filamentp. 1

FormFutura ABSproStrength XY, MPa39.9Strength Z, MPa—Modulus XY, GPa2.1Charpy notched, kJ/m²39IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C245–275Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

FormFutura ABSproFormFutura

Sold as toughened or impact-modified: "ABSpro™ is a professional high-performance and mechanical-focussed modified ABS (Acrylonitrile Butadiene Styrene) type of 3D printer filament – which has been reinforced with a very accurate mixture of Styrene Maleic Anhydride and PolyCarbonate – resulting in an incredibly strong and even more impact resistant filament." (FormFutura, Technical Data Sheet ABSpro™, p. 1). The maker's statement, not a test result.

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet ABSpro™12 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2100 Mpap. 1: Tensile modulus	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	39.9 Mpap. 1: Tensile strength	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	11 %p. 1: Elongation at break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2370 Mpap. 1: Flexural modulus ±	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	72.7 Mpap. 1: Flexural strength ±	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	39 KJ/m²p. 1: Impact strength	ISO 180 As the sheet prints it: ISO 180/A tested at 23° C (73° F)notched	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	108° C °Cp. 1: Viscat softening temp.	ISO 306 As the sheet prints it: ISO 306; VST/A/50 (50° C/h, 10N)
Melting temperature	252 ± 10° C °Cphysically implausiblep. 1: Melting termperature	ISO 294
Density	1.02 g/ccp. 1: Specific gravity	ISO 1183
Water absorption	1.02 %p. 1: Water absorption	ISO 62 As the sheet prints it: ISO 62 Saturated at 23° C
Water absorption	0.19 %p. 1: Moisture absorption	ISO 62 As the sheet prints it: ISO62 Equilibrium 23° C/50% RH
Melt volume-flow rate	5.5 cm³/10minp. 1: Melt flow rate	ISO 1133 As the sheet prints it: ISO 1133; 10Kg tested at 220° C

Print settings

Nozzle: 245–275 °Cown data sheet
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle ± 245 - 275° CFormFutura, Technical Data Sheet ABSpro™p. 1: Recommended printing settings

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

Good forABSpro™ is extremely suitable for printing mechanical parts with exceptional endurance properties.FormFutura, Technical Data Sheet ABSpro™p. 1
BenefitsABSpro™ is a professional high-performance and mechanical-focussed modified ABS (Acrylonitrile Butadiene Styrene) type of 3D printer filament – which has been reinforced with a very accurate mixture of Styrene Maleic Anhydride and PolyCarbonate – resulting in an incredibly strong and even more impact resistant filament.FormFutura, Technical Data Sheet ABSpro™p. 1
Precision and toleranceWith ABSpro™ you can 3D print extremely strong and high gloss objects with a remarkable fine detail.FormFutura, Technical Data Sheet ABSpro™p. 1

FormFutura EasyFil ABSStrength XY, MPa38Strength Z, MPa—Modulus XY, GPa1.9Charpy notched, kJ/m²36IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–270Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

FormFutura EasyFil ABSFormFutura

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet EasyFil™ ABS12 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1900 Mpap. 1: Tensile modulus	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	38 Mpap. 1: Tensile strength	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	9 %p. 1: Elongation at break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2250 Mpap. 1: Flexural modulus ±	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	68.7 Mpap. 1: Flexural strength ±	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	36 KJ/m²p. 1: Impact strength	ISO 180 As the sheet prints it: ISO 180/A tested at 23° C (73° F)notched	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	103° C °Cp. 1: Viscat softening temp.	ISO 306 As the sheet prints it: ISO 306; VST/A/50 (50° C/h, 10N)
Melting temperature	145 ± 10° C °Cp. 1: Melting termperature	ISO 294
Density	1.03 g/ccp. 1: Specific gravity	ISO 1183
Water absorption	1.03 %p. 1: Water absorption	ISO 62
Water absorption	0.21 %p. 1: Moisture absorption	ISO 62
Melt volume-flow rate	5.5 cm³/10minp. 1: Melt flow rate	ISO 1133 As the sheet prints it: ISO 1133; 10Kg tested at 220° C

Print settings

Nozzle: 220–270 °Cown data sheet
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle ± 220 - 270° CFormFutura, Technical Data Sheet EasyFil™ ABSp. 1: Recommended printing settings

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Warping and shrinkageEasyFil™ ABS is light and durable, has a very high impact-resistance, is extra strong, and above all is “easy to print” because of its limited warping.FormFutura, Technical Data Sheet EasyFil™ ABSp. 1

FormFutura Premium ABSStrength XY, MPa36Strength Z, MPa—Modulus XY, GPa1.86Charpy notched, kJ/m²29IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–270Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

FormFutura Premium ABSFormFutura

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet Premium ABS12 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1860 Mpap. 1: Tensile modulus	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	36 Mpap. 1: Tensile strength	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	9 %p. 1: Elongation at break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2148 Mpap. 1: Flexural modulus ±	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	65.7 Mpap. 1: Flexural strength ±	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	29 KJ/m²p. 1: Impact strength	ISO 180 As the sheet prints it: ISO 180/A tested at 23° C (73° F)notched	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	92° C °Cp. 1: Viscat softening temp.	ISO 306 As the sheet prints it: ISO 306; VST/A/50 (50° C/h, 10N)
Melting temperature	145 ± 10° C °Cp. 1: Melting termperature	ISO 294
Density	1.03 g/ccp. 1: Specific gravity	ISO 1183
Water absorption	1.04 %p. 1: Water absorption	ISO 62 As the sheet prints it: ISO 62 Saturated at 23° C
Water absorption	0.23 %p. 1: Moisture absorption	ISO 62 As the sheet prints it: ISO62 Equilibrium 23° C/50% RH
Melt volume-flow rate	5.5 cm³/10minp. 1: Melt flow rate	ISO 1133 As the sheet prints it: ISO 1133; 220° C/10Kg

Print settings

Nozzle: 220–270 °Cown data sheet
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle ± 220 - 270° CFormFutura, Technical Data Sheet Premium ABSp. 1: Recommended printing settings

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Warping and shrinkagePremium ABS might be our entry-level ABS filament, but still it outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping.FormFutura, Technical Data Sheet Premium ABSp. 1

iSANMATE ABSStrength XY, MPa46Strength Z, MPa—Modulus XY, GPa2.27Charpy notched, kJ/m²19IzodHDT 0.45, °C—HDT 1.8, °C97Price, CAD/kg—Nozzle, °C220–260Bed, °C90–110Chamber, °C50–70Drying, °C, h808 h

iSANMATE ABSiSANMATE

Published values

Property	As published	Conditions	On the Overview
iSANMATE, ABS Technical Data Sheet (TDS)10 values
Tensile modulus orientation not stated	2270 MPap. 1: Tensile Modulus 3.20 mm ISO 527-2	ISO 527 As the sheet prints it: 3.20 mm ISO 527-2	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	46.0 MPap. 1: Tensile Stress Yield, 3.20 mm ISO 527-2/50	ISO 527 As the sheet prints it: 3.20 mm ISO 527-2/50	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	2.50%p. 1: Tensile Strain	ISO 527 As the sheet prints it: ISO 527-2/50; thickness=3.20 mm; point=Yield	listed under other properties
Flexural modulus orientation not stated	2350 MPap. 1: Flexural Modulus 3.20 mm	ISO 178 As the sheet prints it: 3.20 mm ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	69.0 MPap. 1: Flexural Strength 3.20 mm ISO 178	ISO 178 As the sheet prints it: 3.20 mm ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	19 kJ/m²p. 1: Notched Izod Impact Strength	ISO 180 As the sheet prints it: ISO 180/A tested at 23 °C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	97 °Cp. 1: Heat Deflection Temperature ISO 75-2/A	ISO 75 As the sheet prints it: ISO 75-2/A	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	95 °Cp. 1: Vicat Softening Temperature ISO 306/B50	ISO 306 As the sheet prints it: ISO 306/B50
Density	1.06 g/cm3p. 1: Density ISO 1183/B	ISO 1183 As the sheet prints it: ISO 1183/B
Mould shrinkage orientation not stated	0.42-0.72 %transcription correctedp. 1: Molding Shrinkage-Flow ISO 294-4 0.42 to	ISO 294 As the sheet prints it: ISO 294-4

Print settings

Nozzle: 220–260 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: 50–70 °Cown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 220 -260 °C; Bed 90 - 110 °C; Chamber 50-70 °CiSANMATE, ABS Technical Data Sheet (TDS)p. 2: Recommended printing settings

Price

Not in the price sample.

Its 2 documents

What the maker says (6)

Good forDue to its strong physical characteristic, thermal resistance, and chemical resistance, it is commonly used as the plastic shell for apparatus.iSANMATE, ABS Technical Data Sheet (TDS)p. 1
Good forABS is widely used in mechanical, automotive, electronic, textile, and construction industries, which is a versatile engineering thermoplastic.iSANMATE, ABS Technical Data Sheet (TDS)p. 1
BenefitsAcrylonitrile-Butadiene-Styrene (ABS) is a thermoplastic polymer material which have high strength, high rigidity and easy to process.iSANMATE, ABS Technical Data Sheet (TDS)p. 1
Pitfalls and limitationsHowever, ABS will have its mechanical strength weaker and discoloration after exposed to weather conditions (UV light, oxygen, moisture, heat) because Polybutadiene stimulate the oxidation of Polystyrene.iSANMATE, ABS Technical Data Sheet (TDS)p. 1
Adhesion between layersexcellent inter-layer adhesioniSANMATE, ABS Technical Data Sheet (TDS)p. 1
Odour and emissionsCarbon Emission 25.0μg/giSANMATE, ABS Technical Data Sheet (TDS)p. 2

SIDDAMENT ABSStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²25IzodHDT 0.45, °C95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C80–100Chamber, °CenclosedDrying, °C, h802–4 h

SIDDAMENT ABSSIDDAMENT

Published values

Property	As published	Conditions	On the Overview
SIDDAMENT, ABS Filament - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated
Tensile strength (yield or break not stated) orientation not stated	42 MPap. 1: Tensile Strength ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	7.8 %p. 1: Elongation at Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1829 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	55 MPap. 1: Bending Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	25 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2	ISO 180	not in the median: set apart (never used to pass), test bar not described as printed
HDT	95 °Cp. 1: Heat Deflection ISO 75 °C	ISO 75	not in the median: set apart (never used to pass), no stated test load
Density	1.08 g/cm3p. 1: Density ISO 1183 g/cm3	ISO 1183
Water absorption	0.4 %p. 1: Water Absorption ISO 62 %	ISO 62

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 2–4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240-260°C; Bed 80-100°C; Drying If damp, dry at 80°C for 2-4 hours.SIDDAMENT, ABS Filament - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Supports and removalSupporting Material: Self-supporting, PVASIDDAMENT, ABS Filament - Technical Datasheetp. 2

Eryone Hyper -Speed ABSStrength XY, MPa15.7Strength Z, MPa13.2Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–290Bed, °C80–110Chamber, °CenclosedDrying, °C, h75–856 h

Eryone Hyper -Speed ABSEryone

Published values

Property	As published	Conditions	On the Overview
Eryone, Technical Data Sheet (TDS) Hyper -Speed ABS9 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	217.08 MPaphysically implausiblep. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006	not in the median: physically implausible as published
Tensile modulus Z (X-Z)	217.16 MPaphysically implausiblep. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006 print settings printing temperature=270 ° C, printing speed=100mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm	not in the median: physically implausible as published
Tensile strength (yield or break not stated) XY	15.68 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4 print settings printing temperature=270 ° C, printing speed=100mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Tensile strength (yield or break not stated) Z (X-Z)	13.16 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa	GB/T 1843 As the sheet prints it: 50mm/min GB/T 1843 print settings printing temperature=270 ° C, printing speed=100mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Elongation at break XY	10.16 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 %	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4 print settings printing temperature=270 ° C, printing speed=100mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Elongation at break Z (X-Z)	5.11 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 %	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4 print settings printing temperature=270 ° C, printing speed=100mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm	in the median
HDT at 0.45 MPa	95 ℃p. 2: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃	specimen not stated, ASTM D648 As the sheet prints it: 0.45MPa ASTM D648	in the median
Density	1.1 g/cm³p. 2: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³	specimen not stated, ASTM D792, ISO 1183, GB/T 1033 As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 tested at 21.5°C
Melt mass-flow rate	20 g/10minp. 2: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min	specimen not stated, no standard named As the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg tested at 220°C

Print settings

Nozzle: 240–290 °Cown data sheet
Bed: 80–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 75–85 °C for 6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240℃-290℃; Bed 80-110℃; Drying 75-85℃, 6hEryone, Technical Data Sheet (TDS) Hyper -Speed ABSp. 1: Recommended printing settings; p. 1: Sealed printing; p. 1: Bed material

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

BenefitsBy enhancing the material's flow properties, it significantly increases printing speed, allowing for the production of more products.Eryone, Technical Data Sheet (TDS) Hyper -Speed ABSp. 1
Warping and shrinkageThis material effectively relieves stress and reduces shrinkage, ensuring stability during the printing process.Eryone, Technical Data Sheet (TDS) Hyper -Speed ABSp. 1

Flashforge ABS MatteStrength XY, MPa35.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–270Bed, °C80–110Chamber, °C25–40Drying, °C, h80≥ 5 h

Flashforge ABS MatteFlashforge

Published values

Property	As published	Conditions	On the Overview
Flashforge, Technical Data Sheet ABS Matte Filament12 valuesUnless a row says otherwise: printed specimen print settings Test Equipment Flashforge Guider 3 Ultra; Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 250mm/s; Wall Thickness 1.2mm; Infill 100%
Tensile strength (yield or break not stated) XY	35.5-36.5 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa	ISO 527	in the median
Elongation at break XY	5-6.5 %p. 1: Elongation at Break (X-Y) ISO 527 %	ISO 527	in the median
Flexural modulus XY	2070-2133 Mpap. 1: Bending Modulus (X-Y) ISO 178 Mpa	ISO 178	in the median
Flexural modulus XZ	1335-1487 Mpap. 1: Bending Modulus (X-Z) ISO 178 Mpa	ISO 178	not in the median: measured on a bar in another orientation
Flexural strength XY	73.5-74.5 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa	ISO 178	in the median
Flexural strength XZ	19.8-24.8 Mpap. 1: Bending Strength (X-Z) ISO 178 Mpa	ISO 178	not in the median: measured on a bar in another orientation
Izod impact strength XY	25.5~29.8 KJ/m²p. 1: Izod Impact Strength (X-Y)	ISO 180	not in the median: notch not stated
Izod impact strength XZ	2.3~2.7 KJ/m²p. 1: Izod Impact Strength (X-Z)	ISO 180	not in the median: notch not stated
HDT at 0.45 MPa	88 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃	ISO 75 As the sheet prints it: 0.455 MPa 66 psi ISO 75 print settings not stated	in the median
Density	1.04-1.06 g/cm³p. 1: Density ISO 1183 g/cm³	specimen not stated, ISO 1183print settings not stated
Water absorption	1 %p. 1: Water Absorption (23℃/24h) ISO 62 %	specimen not stated, ISO 62 As the sheet prints it: 23℃/24h ISO 62 tested at 23°Cprint settings not stated
Melt mass-flow rate	5-10 g/10minp. 1: Melt Index (MFR) (220℃/5Kg) ISO 1133 g/10min	specimen not stated, ISO 1133 As the sheet prints it: MFR 220℃/5Kg ISO 1133 tested at 220°Cprint settings not stated

Print settings

Nozzle: 230–270 °Cown data sheet
Bed: 80–110 °Cown data sheet
Heated chamber: 25–40 °Cown data sheet
Drying: optional: 80 °C for ≥ 5 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230~270℃ (250℃ recommended); Bed 80~110℃ (100℃ recommended); Chamber Room temperature~40℃; Drying In case the filament has become wet, we recommend drying it in a hot air oven at 80℃ for at least 5 hoursFlashforge, Technical Data Sheet ABS Matte Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)

Price

Not in the price sample.

Its 2 documents

What the maker says (5)

BenefitsIt offers high toughness and impact resistance, along with a certain degree of heat resistance.Flashforge, Technical Data Sheet ABS Matte Filamentp. 1
BenefitsEasy to print/High toughness/High impact resistance/Matte finish.Flashforge, Technical Data Sheet ABS Matte Filamentp. 1
Surface finishPrints produced with ABS Matte have a distinct matte surface finish.Flashforge, Technical Data Sheet ABS Matte Filamentp. 1
Supports and removalRecommended Support Material Self-supporting, HIPSFlashforge, Technical Data Sheet ABS Matte Filamentp. 2
Moisture sensitivityABS Matte filament is prone to moisture absorption.Flashforge, Technical Data Sheet ABS Matte Filamentp. 3

Stratasys ABS-ESD7Strength XY, MPa—Strength Z, MPa27Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C105HDT 1.8, °C101Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

Stratasys ABS-ESD7Stratasys

Published values

Property	As published	Conditions	On the Overview
Stratasys, ABS-ESD7 Data Sheet38 valuesUnless a row says otherwise: printed specimen
Tensile modulus Z (ZX)	2.28 (0.21) GPap. 6: Modulus (Elastic) (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	in the median
Tensile modulus Z (ZX)	1.73 (0.020) GPap. 7: Modulus (Elastic) (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: another value of this product is in it
Tensile modulus XZ	2.69 (0.10) GPap. 6: Modulus (Elastic) (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Tensile modulus XZ	2.12 (0.029) GPap. 7: Modulus (Elastic) (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	35.4 (1.3) MPap. 6: Yield Strength	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	33.3 (0.70) MPap. 7: Yield Strength	ASTM D638 As the sheet prints it: ASTM D638; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Tensile break strength Z (ZX)	27.0 (2.3) MPap. 6: Strength @ Break (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	in the median
Tensile break strength Z (ZX)	23.2 (0.34) MPap. 7: Strength @ Break (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: another value of this product is in it
Tensile break strength XZ	33.9 (1.0) MPap. 6: Strength @ Break (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Tensile break strength XZ	31.8 (0.77) MPap. 7: Strength @ Break (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Elongation at break Z	1.59 (0.29) %p. 6: Elongation @ Break	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	in the median
Elongation at break Z	1.8 (0.071) %p. 7: Elongation @ Break	ASTM D638 As the sheet prints it: ASTM D638; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: another value of this product is in it
Elongation at break XZ	3.4 %p. 6: Elongation @ Break %	ASTM D638 print settings F900 – T16 Tip; XZ orientation	not in the median: measured on a bar in another orientation
Elongation at break XZ	2.4 %p. 7: Elongation @ Break %	ASTM D638 print settings F370; XZ orientation	not in the median: measured on a bar in another orientation
Elongation at yield XZ	2.1 %p. 6: Elongation @ Yield %	ASTM D638 print settings F900 – T16 Tip; XZ orientation	listed under other properties
Elongation at yield XZ	2.1 %p. 7: Elongation @ Yield %	ASTM D638 print settings F370; XZ orientation	listed under other properties
Flexural modulus XZ	2.41 (0.073) GPap. 6: Modulus (flexural)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Flexural modulus XZ	2.25 (0.026) GPap. 7: Modulus (flexural)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Flexural modulus ZX	2.04 (0.084) GPap. 6: Modulus	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Flexural strength XZ	60.4 (2.5) MPap. 7: Strength @ Break (flexural)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	not in the median: measured on a bar in another orientation
Flexural strength ZX	44.3 (2.6) MPap. 6: Strength @ Break	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Flexural elongation at break XZ	3.81 (0.26) %p. 7: Strain @ Break (flexural)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F370 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	listed under other properties
Flexural elongation at break ZX	2.67 (0.14) %p. 6: Strain @ Break	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16	listed under other properties
Flexural stress at conventional deflection XZ	67.5 (1.2) MPap. 6: Strength @ 5% Strain	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 print settings 0.010 in. (0.254 mm) layer height on a F370 and on a F900	listed under other properties
Izod impact strength XZ	36.2 (3.0) J/mp. 6: Notched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16	not in the median: in J/m
Izod impact strength ZX	20.5 (1.6) J/mp. 6: Notched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16	not in the median: in J/m
Izod impact strength XZ	198 (36) J/mp. 6: Unnotched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16	not in the median: in J/m
Izod impact strength ZX	85.4 (18) J/mp. 6: Unnotched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16	not in the median: in J/m
Izod impact strength XZ	41.4 (3.0) J/mp. 7: Notched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F370	not in the median: in J/m
Izod impact strength ZX	18 (2.7) J/mp. 7: Notched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F370	not in the median: in J/m
Izod impact strength XZ	343 (41) J/mp. 7: Unnotched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F370	not in the median: in J/m
Izod impact strength ZX	69.1 (6.6) J/mp. 7: Unnotched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F370	not in the median: in J/m
Compression strength XZ	95.3 (2.5) MPap. 6: Yield Strength (compression)	ASTM D695 As the sheet prints it: ASTM D695; printer=F900; tip=T16
Compression strength XZ	52.8 (2.2) MPap. 7: Yield Strength (compression)	ASTM D695 As the sheet prints it: ASTM D695; printer=F370
Compression strength ZX	202 (11) MPa	printed bar (its stated orientation says so), ASTM D695 As the sheet prints it: ASTM D695; printer=F900; tip=T16
HDT at 0.45 MPa	104.6 C °Cp. 4: HDT @ 66 psi	ASTM D648 As the sheet prints it: ASTM D648 Method B; 66 psi	in the median
HDT at 1.8 MPa	101.4 C °Cp. 4: HDT @ 264 psi	ASTM D648 As the sheet prints it: ASTM D648 Method B; 264 psi	in the median
Glass transition temperature	105.46 C °Cp. 4: Tg	ASTM D7426 As the sheet prints it: ASTM D7426 Inflection Point	in the median

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

Stratasys, ABS-ESD7 Data Sheet

What the maker says (4)

Good forThe material is ideal for jigs and fixtures used to fabricate and assemble electronic components and associated production line and conveyor parts.Stratasys, ABS-ESD7 Data Sheetp. 2
Good forIt is also useful for producing functional prototypes, enclosures and packaging.Stratasys, ABS-ESD7 Data Sheetp. 2
BenefitsABS-ESD7™ (acrylonitrile butadiene styrene-electrostatic dissipative) is an ABS thermoplastic with static dissipative properties suited for static discharge-sensitive applications.Stratasys, ABS-ESD7 Data Sheetp. 2
BenefitsABS-ESD7 prevents static electricity buildup so it will not produce a discharge or attract other materials like powders, dust and fine particles.Stratasys, ABS-ESD7 Data Sheetp. 2

MatterHackers ABSStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C80Price, CAD/kg—Nozzle, °C220–240Bed, °C100–130Chamber, °CenclosedDrying, °C, h808 h

MatterHackers ABSMatterHackers

Published values

Property	As published	Conditions	On the Overview
MatterHackers, TECHNICAL DATA SHEET - PRO Series ABS6 valuesUnless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	39 MPap. 1: Yield Stress ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Tensile break strength orientation not stated	30 MPap. 1: Stress at Break ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Flexural modulus orientation not stated	1800 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	58 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	80 °Cp. 1: Heat Deflection Temperature (HDT)	ISO 75 As the sheet prints it: ISO 75; 1.80 MPa	in the median
Density	1.03 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183
MatterHackers, TECHNICAL DATA SHEET - PRO ABS4 valuesThe same values also in MatterHackers, TECHNICAL DATA SHEET - PRO ABS.Unless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	6520 PSIp. 1: Yield Strengthalso in MatterHackers, TECHNICAL DATA SHEET - PRO ABS	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	5800 PSIp. 1: Tensile Strength at Breakalso in MatterHackers, TECHNICAL DATA SHEET - PRO ABS	ASTM D638	not in the median: another value of this product is in it
Elongation at break orientation not stated	2.6 %p. 1: Tensile Elongationalso in MatterHackers, TECHNICAL DATA SHEET - PRO ABS	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	1.12 ft-lb/inp. 1: Notched IZOD Impact	ASTM D256	not in the median: in J/m

Print settings

Nozzle: 220–240 °Cown data sheet
Bed: 100–130 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle 220°c - 240°c; Bed 100°c - 130°cMatterHackers, TECHNICAL DATA SHEET - PRO ABSp. 1: Recommended printing settings
Nozzle 220°c - 240°c; Bed 100°c - 130°cMatterHackers, TECHNICAL DATA SHEET - PRO ABSp. 1: Recommended printing settings

Price

Not in the price sample.

Its 4 documents

FormFutura EasyFil ABS - Glow in the DarkStrength XY, MPa45.1Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C85Price, CAD/kg—Nozzle, °C230–255Bed, °C100Chamber, °CnoneDrying, °C, hnone

FormFutura EasyFil ABS - Glow in the DarkFormFutura

Data sheet shared with Spectrum Smart ABS: their values are one table, recorded once.

Modified: luminescent pigment. Its values are kept out of the material's medians.

Published values

Property	As published	Conditions	On the Overview
FormFutura, TECHNICAL DATA SHEET EasyFil ABS - Glow in the Dark5 valuesUnless a row says otherwise: specimen not stated
Elongation at break orientation not stated	10 %p. 1: Elongation at break	ASTM D638	not in the median: added filler or additive
Flexural modulus orientation not stated	25000 kg/cm2p. 1: Flexural modulus	ASTM D790	not in the median: added filler or additive
Hardness	108 Rockwell Rp. 1: Rockwell hardness	no standard stated	listed under other properties
Vicat softening temperature	93 °Cp. 1: Vicat softening temperature	ASTM D1525
Density	1,05 g/cm3p. 1: Specific gravity	ASTM D792

Print settings

Nozzle: 230–255 °Cown data sheet
Bed: 100 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: not neededown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 230 - 255 °C; Bed 100 - 100 °C; Drying Not necessaryFormFutura, TECHNICAL DATA SHEET EasyFil ABS - Glow in the Darkp. 1: Bed temperature, Enclosure, Nozzle temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

Good forHome decoFormFutura, TECHNICAL DATA SHEET EasyFil ABS - Glow in the Darkp. 1
Warping and shrinkageSuperb process stability and limited warpingFormFutura, TECHNICAL DATA SHEET EasyFil ABS - Glow in the Darkp. 1
Moisture sensitivityDry box NoFormFutura, TECHNICAL DATA SHEET EasyFil ABS - Glow in the Darkp. 1

Spectrum ABS GP450Strength XY, MPa39Strength Z, MPa—Modulus XY, GPa2.1Charpy notched, kJ/m²19IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg61Nozzle, °C235–255Bed, °C100Chamber, °CenclosedDrying, °C, h808 h

Spectrum ABS GP450Spectrum

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET ABS GP4508 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2100 MPap. 1: Tensile Modulus (1mm/min)	ISO 527 As the sheet prints it: 1mm/min ISO 527-1	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	39 MPap. 1: Yield Stress (50mm/min)	ISO 527 As the sheet prints it: ISO 527-1,2; rate=50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	13,00 %p. 1: Elongation at Break (1mm/min)	ISO 527 As the sheet prints it: 1mm/min ISO 527-1	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2000 MPap. 1: Flexural Modulus (2mm/min)	ISO 178 As the sheet prints it: 2mm/min ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	19 KJ/m2p. 1: Izod Impact Strength, Notched @ 23°C	ISO 180 As the sheet prints it: 23°C ISO 180-1A tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	10 KJ/m2p. 1: Izod Impact Strength, Notched @ -30°C	ISO 180 As the sheet prints it: -30°C ISO 180-1A tested at -30°C	not in the median: tested below room temperature
Vicat softening temperature	95 °Cp. 1: Vicat Softening Temperature	ISO 306
Density	1.04 g/cm3p. 1: Specific Gravity	ISO 1183 As the sheet prints it: ISO 1183-1

Print settings

Nozzle: 235–255 °Cown data sheet
Bed: 100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 235-255°C; Bed 100°CSpectrum, TECHNICAL DATA SHEET ABS GP450p. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 5: Dry box recommended; p. 5: Ruby or hardened nozzle recommended; p. 5: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended

Price

61 CAD/kgits one regular price in the sample

1 listing

3D Printing Canada: 61 CAD/kgDark Blue - Spectrum ABS GP450 Filament - 1.75mm, 1kg (SKU 67bbb9eebe806)in its price; seen 30 Sep 2026

Its 4 documents

What the maker says (8)

BenefitsThe composition of the material – compared to classic ABS – has been optimized for additive manufacturing, which allows printing at a very high speed (up to 200mm/s) without any mechanical properties lossesSpectrum, TECHNICAL DATA SHEET ABS GP450p. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET ABS GP450p. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET ABS GP450p. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET ABS GP450p. 1
BenefitsAll-purpose, industrial grade, high mechanical strength & impact resistance, high printing speed (200mm/s), very robust interlayer adhesionSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21
Adhesion between layersvery robust interlayer adhesionSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21
BenefitsAll-purpose, industrial grade, high mechanical strength & impact resistance, high printing speed (200mm/s)Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3
Adhesion between layersinterlayer adhesionSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3

Spectrum ABS MedicalStrength XY, MPa47Strength Z, MPa—Modulus XY, GPa2.45Charpy notched, kJ/m²14IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C235–255Bed, °C100Chamber, °CenclosedDrying, °C, h808 h

Spectrum ABS MedicalSpectrum

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET ABS Medical8 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2450 MPap. 1: Tensile Modulus (1mm/min)	ISO 527 As the sheet prints it: 1mm/min ISO 527-1	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	47 MPap. 1: Yield Stress (50mm/min)	ISO 527 As the sheet prints it: ISO 527-1,2; rate=50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	16,00 %p. 1: Elongation at Break (1mm/min)	ISO 527 As the sheet prints it: 1mm/min ISO 527-1	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2500 MPap. 1: Flexural Modulus (2mm/min)	ISO 178 As the sheet prints it: 2mm/min ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	14 KJ/m2p. 1: Izod Impact Strength, Notched @ 23°C	ISO 180 As the sheet prints it: 23°C ISO 180-1A tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	7 KJ/m2p. 1: Izod Impact Strength, Notched @ -30°C	ISO 180 As the sheet prints it: -30°C ISO 180-1A tested at -30°C	not in the median: tested below room temperature
Vicat softening temperature	97 °Cp. 1: Vicat Softening Temperature	ISO 306
Density	1.06 g/cm3p. 1: Specific Gravity	ISO 1183 As the sheet prints it: ISO 1183-1

Print settings

Nozzle: 235–255 °Cown data sheet
Bed: 100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 235-255°C; Bed 100°CSpectrum, TECHNICAL DATA SHEET ABS Medicalp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
Bed 100 °CSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 5: Bed temp. [°C]; p. 5: Dry box recommended; p. 5: Ruby or hardened nozzle recommended; p. 5: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended

Price

Not in the price sample.

1 listing: 1 with no regular price per kilogram recorded

3D Printing Canada: 60 per kg, sale priceNatural - Spectrum ABS Medical Filament - 1.75mm, 1kg (SKU 67bbb9f402978)not used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 4 documents

What the maker says (9)

Good forFilament Spectrum Medical ABS is a highest-quality material designed specifically for medical applications.Spectrum, TECHNICAL DATA SHEET ABS Medicalp. 1
Good for3D print of personalized, lightweight prosthesesSpectrum, TECHNICAL DATA SHEET ABS Medicalp. 1
Good formanufacturing of support structures for rehabilitationSpectrum, TECHNICAL DATA SHEET ABS Medicalp. 1
Benefitshigh speed printing without quality lossesSpectrum, TECHNICAL DATA SHEET ABS Medicalp. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET ABS Medicalp. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET ABS Medicalp. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET ABS Medicalp. 1
BenefitsManufactured using ABS pellets that meet the biocompatibility requirements of USP Class VI or ISO 10993-1 certificationsSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21
Good forManufactured using ABS pellets that meet the biocompatibility requirements of USP Class VI or ISO 10993-1 certificationsSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3

Spectrum Smart ABSStrength XY, MPa45.1Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C85Price, CAD/kg33Nozzle, °C230–255Bed, °C100Chamber, °CenclosedDrying, °C, hnone

Spectrum Smart ABSSpectrum

Data sheet shared with FormFutura EasyFil ABS - Glow in the Dark: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET Smart ABS9 valuesThe same values also in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.
Tensile yield strength orientation not stated	460 kg/cm2p. 1: Tensile Strength at Yield, 3.2mm (50mm/min)	ASTM D638 As the sheet prints it: 3.2mm D 638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	10 %p. 1: Tensile Elongation at Break, 3.2mm (50mm/min)	ASTM D638 As the sheet prints it: 3.2mm D 638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	25000 kg/cm2p. 1: Flexural Modulus, 3.2mm (15mm/min)	ASTM D790 As the sheet prints it: 3.2mm D 790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	740 kg/cm2p. 1: Flexural Strength, 3.2mm (15mm/min)	ASTM D790 As the sheet prints it: 3.2mm D 790	not in the median: set apart (never used to pass), test bar not described as printed
Hardness	108 Rockwell Rp. 1: Rockwell Hardness, R Scale	ASTM D785 As the sheet prints it: D 785	listed under other properties
HDT at 1.8 MPa	85 °Cp. 1: Heat Deflection Temperature, 6.4mmalso in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO	ASTM D648 As the sheet prints it: 6.4mm D 648	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	93 °Cp. 1: Vicat Softening Temperature	ASTM D1525 As the sheet prints it: D 1525
Density	1.05 g/cm3p. 1: Specific Gravity	ASTM D792 As the sheet prints it: D 792
Melt mass-flow rate	21 g/10minp. 1: Melt Flow Rate (220°C/10kg)	ASTM D1238 As the sheet prints it: 220°C/10kg D1238 tested at 220°C

Print settings

Nozzle: 230–255 °Cown data sheet
Bed: 100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: not neededFormFutura EasyFil ABS - Glow in the Dark's data sheet, shared
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 230-255°C; Bed 100°CSpectrum, TECHNICAL DATA SHEET Smart ABSp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
Nozzle 230-255 °CSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended

Price

33 CAD/kgits one regular price in the sample

1 listing

3D Printing Canada: 33 CAD/kgPolar White - Spectrum Smart ABS Filament - 1.75mm, 1kg (SKU 67bbb3764dd15)in its price; seen 30 Sep 2026

Its 4 documents

What the maker says (11)

BenefitsThe specific qualities of Spectrum Smart ABS include a high impact resistance and relatively high rigidity.Spectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Benefitseasy post-processing (grinding, drilling, sawing)Spectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Warping and shrinkagereduced warping ratio (0.5-0.7%)Spectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Warping and shrinkageShrinkage (Flow), 3,2mm 0,4-0,7% D955Spectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Surface finishhigh gloss of external surfaceSpectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Adhesion between layersgood interlayer adhesion, especially using 3D printer with heated chamberSpectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET Smart ABSp. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET Smart ABSp. 1
BenefitsHigh quality ABS, reduced shrinkage, high impact resistance & rigidity, increased flow indexSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Warping and shrinkagereduced shrinkageSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20

Nanovia ABS EFStrength XY, MPa29Strength Z, MPa—Modulus XY, GPa1.82Charpy notched, kJ/m²18HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C100–110Chamber, °C90Drying, °C, h604 h

Nanovia ABS EFNanovia

Published values

Property	As published	Conditions	On the Overview
Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanovia9 values
Tensile modulus XY	1820 MPap. 1: Young’s modulus (+45° / -45° tab)	ISO 527 As the sheet prints it: ISO 527-2/1A print settings Test performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer.	in the median
Tensile modulus orientation not stated	1800 MPap. 1: Young’s modulus	ISO 527 As the sheet prints it: ISO 527-2/1A print settings Test performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress.	not in the median: another value of this product is in it
Tensile strength (yield or break not stated) XY	29 MPap. 1: Ultimate strength (+45° / -45° tab)	ISO 527 As the sheet prints it: ISO 527-2/1A print settings Test performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer.	in the median
Tensile strain at strength XY	2.3 %p. 1: Elongation ultimate strength (+45° / -45° tab)	ISO 527 As the sheet prints it: ISO 527-2/1A print settings Test performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer.	listed under other properties
Tensile strain at strength orientation not stated	2.3 %p. 1: Elongation ultimate strength	ISO 527 As the sheet prints it: ISO 527-2/1A print settings Test performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress.	listed under other properties
Charpy impact strength	18 kJ/m2p. 1: Charpy (notched)	no standard stated	in the median
Glass transition temperature	110 °Cp. 1: Tg	no standard stated	in the median
Vicat softening temperature	102 °Cp. 1: VICAT	ISO 306 As the sheet prints it: ISO 306/B50
Density	1.03 g/cm3p. 1: Density	ISO 1183

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: 90 °Cown data sheet
Drying: optional: 60 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 – 260 °C; Bed 100 – 110 °C; Chamber 90 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1: Recommended printing settings: Extrusion temperature; p. 1: Drying note

Price

Not in the price sample.

Its 2 documents

What the maker says (8)

BenefitsNanovia ABS EF distinguishes itself due to its higher shock and thermal resistance, as well as being able to smoothed using acetone.Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1
BenefitsIt’s characterized by it’s high shock resistance, its ability to be welded and smoothed with acetone, and its low mass.Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1
BenefitsFDA food-grade native materialNanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1
BenefitsWith it’s printing settings close to standard, the Nanovia ABS EF filament can be used on most commercially available 3D printers.Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1
Pitfalls and limitationsFor an outdoor usage, we recommend that you paint your print or submit them to an anti UV treatment, such as our Nanovia smoothing solution.Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1
Pitfalls and limitationsABS is sensitive to UV radiation.Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1
Surface finishCan be acetone smoothedNanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1
Odour and emissionsWhilst printing ABS produces a VOC derivative of styrene.Nanovia, Nanovia ABS EF : Endocrine disruptor free : Nanoviap. 1

Stratasys ABS-M30Strength XY, MPa—Strength Z, MPa27.5Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C104HDT 1.8, °C100Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

Stratasys ABS-M30Stratasys

Published values

Property	As published	Conditions	On the Overview
Stratasys, MATERIAL DATA SHEET ABS-M3040 valuesUnless a row says otherwise: printed specimen
Tensile modulus Z (ZX)	2.30 (0.16) GPap. 10: Modulus (Elastic) (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	in the median
Tensile modulus Z (ZX)	1.78 (29) GPap. 9: Modulus (Elastic) (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile modulus XZ	2.40 (0.080) GPap. 10: Modulus (Elastic) (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	not in the median: measured on a bar in another orientation
Tensile modulus XZ	2.00 (27) GPap. 9: Modulus (Elastic) (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile yield strength Z (ZX)	27.5 (0.28) MPap. 10: Yield Strength (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	in the median
Tensile yield strength Z (ZX)	23.1 (1.3) MPap. 9: Yield Strength (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile yield strength XZ	30.8 (0.85) MPap. 10: Yield Strength (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	32.5 (1.7) MPap. 9: Yield Strength (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile break strength Z (ZX)	26.8 (0.84) MPap. 10: Strength at Break (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	22.9 (1.2) MPap. 9: Strength at Break (ZX; ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile break strength XZ	28.1 (0.58) MPap. 10: Strength at Break (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	not in the median: measured on a bar in another orientation
Tensile break strength XZ	27.6 (2.4) MPap. 9: Strength at Break (XZ; ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Elongation at break Z	1.6 (0.2) %p. 9: Elongation at Break	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; tip=T14 Standard Head print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	in the median
Elongation at break Z	1.8 (0.31) %p. 10: Elongation at Break	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	not in the median: another value of this product is in it
Elongation at break XZ	4.5 %p. 9: Elongation at Break %	ASTM D638 print settings Table 4: ABS-M30 Black Mechanical Properties - F770 - T14 Standard Head · 0.25 mm (0.010 in.) Layer Height	not in the median: measured on a bar in another orientation
Elongation at break XZ	8.1 %p. 10: Elongation at Break %	ASTM D638 print settings Table 5: ABS-M30 Black Mechanical Properties - F900 - T16 Tip · 0.25 mm (0.010 in.) Layer Height	not in the median: measured on a bar in another orientation
Elongation at yield Z	1.6 (0.2) %p. 9: Elongation at Yield	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; tip=T14 Standard Head print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	listed under other properties
Elongation at yield Z	1.7 (0.13) %p. 10: Elongation at Yield	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	listed under other properties
Elongation at yield XZ	2.1 %p. 9: Elongation at Yield %	ASTM D638 print settings Table 4: ABS-M30 Black Mechanical Properties - F770 - T14 Standard Head · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Elongation at yield XZ	1.8 %p. 10: Elongation at Yield %	ASTM D638 print settings Table 5: ABS-M30 Black Mechanical Properties - F900 - T16 Tip · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Flexural modulus XZ	2.22 (0.037) GPap. 10: Modulus (flexural)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	not in the median: measured on a bar in another orientation
Flexural modulus XZ	2.17 (0.03) GPap. 9: Modulus (XZ)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Flexural modulus ZX	1.84 (0.06) GPap. 9: Modulus (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Flexural modulus ZX	1.96 (0.064) GPap. 10: Modulus	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Flexural strength ZX	37.8 (4.1) MPap. 9: Strength at Break (ZX; ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm; endpoint=break	not in the median: measured on a bar in another orientation
Flexural strength ZX	47.7 (2.2) MPap. 10: Strength at Break	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; colour=Black; layer_height=0.25 mm; endpoint=break	not in the median: measured on a bar in another orientation
Flexural elongation at break ZX	2.2 %p. 9: Strain at Break %	ASTM D790 As the sheet prints it: ASTM D790, Procedure A print settings Table 4: ABS-M30 Black Mechanical Properties - F770 - T14 Standard Head · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Flexural elongation at break ZX	3.4 %p. 10: Strain at Break %	ASTM D790 As the sheet prints it: ASTM D790, Procedure A print settings Table 5: ABS-M30 Black Mechanical Properties - F900 - T16 Tip · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Flexural stress at conventional deflection XZ	58.7 (0.54) MPap. 10: Strength at 5% Strain	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F900; tip=T16 print settings 0.25 mm (0.010 in.) layer height on the F770 and F900	listed under other properties
Flexural stress at conventional deflection XZ	58.1 (2.2) MPap. 9: Strength at 5% Strain	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F770; tip=T14 Standard Head; colour=Black; layer_height=0.25 mm; strain=5%	listed under other properties
Izod impact strength XZ	101 (9.9) J/mp. 10: Notched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; layer height=0.25 mm	not in the median: in J/m
Izod impact strength ZX	32.2 (3.0) J/mp. 10: Notched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; layer height=0.25 mm	not in the median: in J/m
Izod impact strength XZ	291 (57) J/mp. 10: Unnotched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: in J/m
Izod impact strength ZX	103 (30) J/mp. 10: Unnotched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: in J/m
Compression strength XZ	88.3 (3.0) MPap. 10: Yield Strength (compression)	ASTM D695 As the sheet prints it: ASTM D695; layer height=0.25 mm; printer=F900; tip=T16
Compression strength ZX	208 (15) MPap. 10: Yield Strength	ASTM D695 As the sheet prints it: ASTM D695; printer=F900; tip=T16; colour=Black; layer_height=0.25 mm; endpoint=yield
HDT XY, at 0.45 MPa	104.4 °Cp. 7: HDT at 66 psi	ASTM D648 As the sheet prints it: 66 psi ASTM D648 print settings Table 3: ABS-M30 Physical Properties · XY column	in the median
HDT XY, at 1.8 MPa	100.0 °Cp. 7: HDT at 264 psi	ASTM D648 As the sheet prints it: 264 psi ASTM D648 print settings Table 3: ABS-M30 Physical Properties · XY column	in the median
HDT XZ, at 0.45 MPa	103.2 °C (218 °F)	ASTM D648 As the sheet prints it: ASTM D648 Method B; 66 psi	not in the median: measured on a bar in another orientation
Glass transition temperature	105.2 °C (221 °F)p. 7: Tg	moulded bar (resin supplier's value), ASTM D7426 As the sheet prints it: ASTM D7426 Inflection Point	not in the median: the resin supplier's value, not a printed part

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

Stratasys, MATERIAL DATA SHEET ABS-M30

What the maker says (1)

BenefitsABS is characterized by its strength and toughness, while being lightweight and resilient, suitable for most general-purpose 3D printing use cases.Stratasys, MATERIAL DATA SHEET ABS-M30p. 2

Fabru Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)Strength XY, MPa54Strength Z, MPa—Modulus XY, GPa2.54Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C83Price, CAD/kg—Nozzle, °C210–260Bed, °C80–110Chamber, °CenclosedDrying, °C, h904 h

Fabru Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)Fabru

Published values

Property	As published	Conditions	On the Overview
Fabru, Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)8 values
Tensile modulus orientation not stated	2540 MPap. 1: Tensile modulus (ISO 527-2/1)	ISO 527 As the sheet prints it: ISO 527-2/1	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	54 MPap. 1: Yield stress (ISO 527-2/50)	ISO 527 As the sheet prints it: ISO 527-2/50	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	20 %p. 1: Elongation at break (ASTM D638)	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	17 %physically implausiblep. 1: Elongation at yield (ISO 527-2/50)	ISO 527 As the sheet prints it: ISO 527-2/50	listed under other properties
HDT at 1.8 MPa	83 °Cp. 1: Heat deflection temperature	ASTM D648 As the sheet prints it: 1.8 MPa (ASTM D648)	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.09 g/cm3p. 1: Density (ISO 1183)	ISO 1183
Melt mass-flow rate	25 g/10minp. 1: MFR (ISO 1133	ISO 1133
Mould shrinkage orientation not stated	0.4-0.6 %p. 1: Shrinkage (ASTM D955)	ASTM D955

Print settings

Nozzle: 210–260 °Cown data sheet
Bed: 80–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 90 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 210-260 °C; Bed 80-110 °C; Drying 90°C; 2-4 hFabru, Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time

Price

Not in the price sample.

Its 2 documents

What the maker says (5)

Good forThe plastic also fulfills an unavoidable requirement for materials in medical technology, namely that it can be sterilized.Fabru, Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)p. 1
BenefitsThe result is better adhesion to the printing plate.Fabru, Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)p. 1
BenefitsGood resistance to stress cracking - easy to weldFabru, Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)p. 1
Warping and shrinkageThis also means that the tendency to shrink is lower than with ABS.Fabru, Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)p. 1
Odour and emissionsThe smell is unlike ABS better.Fabru, Methylmethacrylat-Acrylnitrilbutadienstyrol (MABS)p. 1

FormFutura ReForm - rTitanStrength XY, MPa43.6Strength Z, MPa—Modulus XY, GPa2.03Charpy notched, kJ/m²58HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C80–90Chamber, °CenclosedDrying, °C, h808 h

FormFutura ReForm - rTitanFormFutura

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet ReForm™ - rTitan6 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2030 Mpap. 1: Tensile modulus	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	43.6 Mpap. 1: Tensile strength	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	34 %p. 1: Elongation at break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	58 KJ/m²p. 1: Impact strength	ISO 179tested at 23° C (73° F)notched	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.10 g/ccp. 1: Specific gravity	ISO 1183
Melt mass-flow rate	41 g/10minp. 1: Melt flow rate	ISO 1133

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 80–90 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle ± 240 - 260° CFormFutura, Technical Data Sheet ReForm™ - rTitanp. 1: Recommended printing settings
Nozzle ± 245 – 265° C; Bed ± 80 – 90° CFormFutura, ReForm - rTitanp. 1: Nozzle size; p. 1: Adhesive; p. 1: Print temp; p. 1: Heat bed; p. 1: Enclosure

Price

Not in the price sample.

Its 3 documents

What the maker says (3)

Warping and shrinkageIt prints with high dimensional accuracy and without warping.FormFutura, ReForm - rTitanp. 1
BenefitsIt is an engineering filament with exceptional mechanical properties.FormFutura, ReForm - rTitanp. 1
BenefitsThe design of the formulation of ReForm rTitan is based on the formulation of TitanX: a proven formulation for printability and high quality 3D printing.FormFutura, ReForm - rTitanp. 1

FormFutura TitanXStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C85Price, CAD/kg71Nozzle, °C245–270Bed, °C100–110Chamber, °CenclosedDrying, °C, h45–6012 h

FormFutura TitanXFormFutura

Published values

Property	As published	Conditions	On the Overview
FormFutura, TECHNICAL DATA SHEET TitanX5 valuesUnless a row says otherwise: specimen not stated
Elongation at break orientation not stated	10 %p. 1: Elongation at break	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	740 kg/cm2p. 1: Flexural strenght	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	85 °Cp. 1: Heat deflection temperature	ASTM D648 As the sheet prints it: ASTM D648; HDT A	in the median
Vicat softening temperature	93 °Cp. 1: Vicat softening temperature	ASTM D1525
Density	1,05 g/cm3p. 1: Specific gravity	no standard stated

Print settings

Nozzle: 245–270 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 45–60 °C for 12 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 245- 270 °C; Bed 100-110°C; Drying Recommended 45- 60 °C 12 hFormFutura, TECHNICAL DATA SHEET TitanXp. 1: Bed temperature, Drying, Enclosure, Nozzle temperature

Price

70.7 CAD/kgits one regular price in the sample

1 listing

DigitMakers: 70.7 CAD/kgFormFutura TitanX- 750g 1.75mm / Black (SKU FFTURA-TITX-175BLCK-00750)in its price; seen 30 Sep 2026

Its 2 documents

What the maker says (4)

Warping and shrinkagethe next generation ABS that 3D prints with high precision and zero warping.FormFutura, TECHNICAL DATA SHEET TitanXp. 1
Warping and shrinkageMinimal warping, excellent interlayer adhesionFormFutura, TECHNICAL DATA SHEET TitanXp. 1
Precision and tolerancePrecise 3D printing with remarkable fine detailFormFutura, TECHNICAL DATA SHEET TitanXp. 1
Moisture sensitivityDry box NoFormFutura, TECHNICAL DATA SHEET TitanXp. 1

Fabru Acrylnitrilbutadienstyrol (ABS)Strength XY, MPa47Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C80–110Chamber, °CenclosedDrying, °C, h802–4 h

Fabru Acrylnitrilbutadienstyrol (ABS)Fabru

Published values

Property	As published	Conditions	On the Overview
Fabru, Acrylnitrilbutadienstyrol (ABS)9 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	held back: the sheet's unit or table layout is unclearheld backp. 1: Tensile modulus (ASTM D790)	ASTM D790	not in the median: held back
Tensile yield strength orientation not stated	47 MPap. 1: Yield stress (ASTM D638)	specimen not stated; its document points to a moulded or resin bar, ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	25 %p. 1: Elongation at break ( ASTM D638)	specimen not stated; its document points to a moulded or resin bar, ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	3.5 %p. 1: Elongation at yield ( ASTM D638)	ASTM D638	listed under other properties
HDT at 0.45 MPa	95 °Cp. 1: Heat deflection temperature	specimen not stated; its document points to a moulded or resin bar, ASTM D648 As the sheet prints it: 0.45 MPa (ASTM D648)	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	105 °Cp. 1: Vicat softening temperature A	no standard stated
Density	1.05 g/cm3p. 1: Density (ASTM D792)	ASTM D792
Melt mass-flow rate	1.6 g/10minp. 1: MFR (ASTM D1238)	ASTM D1238
Mould shrinkage orientation not stated	0.4-0.7 %p. 1: Shrinkage (ISO 294-4, 2577)	ISO 294 As the sheet prints it: 2577 ISO 294-4

Print settings

Nozzle: 210–260 °Cown data sheet
Bed: 80–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 80 °C for 2–4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 210-260 °C; Bed 80-110 °C; Drying 80°C | 2-4hFabru, Acrylnitrilbutadienstyrol (ABS)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time; p. 1: disadvantageous

Price

Not in the price sample.

Its 2 documents

What the maker says (10)

BenefitsCompared to PLA, ABS filament is more stable and has a higher heat tolerance.Fabru, Acrylnitrilbutadienstyrol (ABS)p. 1
BenefitsHigh surface hardnessFabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Warping and shrinkageTends to warp (warp effect)Fabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Warping and shrinkageIn return, however, ABS filament tends to warp.Fabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Odour and emissionsWhile the ABS filament is melting, an odor develops.Fabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Odour and emissionsMake sure your printer is in a well-ventilated room and avoid breathing in these fumes.Fabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Odour and emissionsMake sure that there are no people who are sensitive to chemicals in this room react, or stay with children or pets for a long time.Fabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Odour and emissionsEvaporates when heatedFabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Printing adviceCooling is not necessary, but can definitely bring advantages.Fabru, Acrylnitrilbutadienstyrol (ABS)p. 1
Printing adviceNeeds a warm room or a closed printing chamberFabru, Acrylnitrilbutadienstyrol (ABS)p. 1

Nobufil ABSxStrength XY, MPa38Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C90–110Chamber, °CenclosedDrying, °C, h60–703–6 h

Nobufil ABSxNobufil

Published values

Property	As published	Conditions	On the Overview
Nobufil, Technical Datasheet ABSx12 valuesUnless a row says otherwise: print settings FDM H column (the sheet does not say what H is)
Tensile strength (yield or break not stated) orientation not stated	38 MPap. 1: Tensile strength, FDM H	ISO 527	not in the median: set apart (never used to pass), no stated orientation
Tensile strength (yield or break not stated) orientation not stated	37 MPap. 1: Tensile strength, Injection	ISO 527	not in the median: measured on a moulded bar
Elongation at break orientation not stated	11 %p. 1: Elongation at break, FDM H	ISO 527	not in the median: set apart (never used to pass), no stated orientation
Elongation at break orientation not stated	48 %p. 1: Elongation at break, Injection	ISO 527	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	1840 MPap. 1: Flexural modulus	ISO 178print settings not stated	not in the median: measured on a moulded bar
Flexural strength orientation not stated	58 MPap. 1: Flexural strength	ISO 178print settings not stated	not in the median: measured on a moulded bar
Izod impact strength orientation not stated	4 kJ/m²p. 1: Izod Impact strength notched, FDM H	ISO 180	not in the median: set apart (never used to pass), no stated orientation
Izod impact strength orientation not stated	3,5 kJ/m²p. 1: Izod Impact strength notched, Injection	ISO 180	not in the median: measured on a moulded bar
Izod impact strength orientation not stated	26 kJ/m²p. 1: Izod Impact strength unnotched, FDM H	ISO 180	not in the median: unnotched
Izod impact strength orientation not stated	33 kJ/m²p. 1: Izod Impact strength unnotched, Injection	ISO 180	not in the median: measured on a moulded bar
HDT at 1.8 MPa	86 °Cp. 1: HDT A	ISO 75 As the sheet prints it: HDT A ISO 75 print settings not stated	not in the median: measured on a moulded bar
Density	1,08 g/cm³p. 1: Density	ISO 1183print settings not stated

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 60–70 °C for 3–6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 260°C ± 10; Bed 100°C ± 10; Drying Pre-dry material for 3-6 hours at 60 - 70°C (max.).Nobufil, Technical Datasheet ABSxp. 1: Recommended printing settings; p. 1: Drying note

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Warping and shrinkageABSx has low warping and odor characteristics to enhance your printing experience even on printers without an enclosure.Nobufil, Technical Datasheet ABSxp. 1

Prusa Research Buddy3D ABSStrength XY, MPa41Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²22HDT 0.45, °C—HDT 1.8, °C71Price, CAD/kg—Nozzle, °C240–265Bed, °C90–105Chamber, °CenclosedDrying, °C, h808 h

Prusa Research Buddy3D ABSPrusa Research

Published values

Property	As published	Conditions	On the Overview
Prusa Research, Buddy3D Product card ABS10 valuesUnless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	41 MPap. 2: Yield strength	ISO 527 As the sheet prints it: ISO 527-1, -2; rate=50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	50 %p. 2: Elongation at break 527-1, -250 mm/min %	no standard named As the sheet prints it: 527-1 -250 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength orientation not stated	22 kJ/m²p. 2: Notched Charpy impact strength	no standard named As the sheet prints it: 179-1 1eA tested at 23 °C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	71 °Cp. 2: Deflection temperature under load 75-1,-2 1.8 MPa °C	no standard named As the sheet prints it: 1.8 MPa 75-1 -2	in the median
Vicat softening temperature	96 °Cp. 2: Vicat softening point	ISO 306 As the sheet prints it: ISO 306; 50N
Continuous service temperature	75°Cp. 1: Main ABS features	no standard stated
Decomposition temperature	300 °Cp. 3: Decomposition of ABS	no standard stated
Water absorption	0.3 %p. 2: Water absorption to saturation ASTM D570 23 °C/sat. %	ASTM D570 As the sheet prints it: 23 °C/sat. ASTM D570 tested at 23°C
Mould shrinkage orientation not stated	0.3 – 0.5 %p. 2: Processing shrinkage II/ (box glyph)	no standard stated
Surface resistivity	10^13 Ωp. 2: Surface resistivity IEC 60093 – Ω	IEC 60093

Print settings

Nozzle: 240–265 °Cown data sheet
Bed: 90–105 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 – 265 °C; Bed 90 – 105 °CPrusa Research, Buddy3D Product card ABSp. 3: Recommended printing settings; p. 3: 3. RECOMMENDATION OF PRINTING

Price

Not in the price sample.

Its 2 documents

What the maker says (7)

BenefitsABS has good isolation properties and much more temperature resistance than PLA.Prusa Research, Buddy3D Product card ABSp. 1
Benefitsgood mechanical strength, stiffness, and hardness high impact resistance good thermal stability permissible continuous operation temperature over 75°C average chemical resistance, in particular satisfactory resistance to alkalis, diluted acids, aliphatic hydrocarbons, oils and fats good electrical insulation propertiesPrusa Research, Buddy3D Product card ABSp. 1
Warping and shrinkagePrinting with ABS is a little more difficult because of more shrinkage and less universality of the substrate.Prusa Research, Buddy3D Product card ABSp. 1
Surface finishhigh glossPrusa Research, Buddy3D Product card ABSp. 1
Warping and shrinkageProcessing shrinkage II/ ⊥ – % 0.3 – 0.5Prusa Research, Buddy3D Product card ABSp. 2
Pitfalls and limitationsThere might be some problems to achieve proper adhesion on glass bed.Prusa Research, Buddy3D Product card ABSp. 3
Printing adviceUsing perforated bed, PVA glue, specialized product (Dimafix), kapton coating or other different way to obtain adhesion is recommended.Prusa Research, Buddy3D Product card ABSp. 3

Stratasys ABS-M30iStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C96HDT 1.8, °C82Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

Stratasys ABS-M30iStratasys

Published values

Property	As published	Conditions	On the Overview
Stratasys, ABS-M30i Data Sheet10 values
Tensile modulus XZ	2,400 MPap. 1: Tensile Modulus (Type 1,0.125”, 0.2”/min) ASTM D638	ASTM D638 As the sheet prints it: Type 1 0.125” 0.2”/min ASTM D638 print settings Build orientation is on side long edge. Tested parts were built on Fortus 400mc™ @ 0.010” (0.254 mm) slice.	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) XZ	36 MPap. 1: Tensile Strength (Type 1,0.125”, 0.2”/min) ASTM D638	ASTM D638 As the sheet prints it: Type 1 0.125” 0.2”/min ASTM D638 print settings Build orientation is on side long edge. Tested parts were built on Fortus 400mc™ @ 0.010” (0.254 mm) slice.	not in the median: measured on a bar in another orientation
Flexural modulus XZ	2,300 MPap. 1: Flexural Modulus (Method 1,0.05”/min) ASTM D790	ASTM D790 As the sheet prints it: Method 1 0.05”/min ASTM D790 print settings Build orientation is on side long edge. Tested parts were built on Fortus 400mc™ @ 0.010” (0.254 mm) slice.	not in the median: measured on a bar in another orientation
Flexural strength XZ	61 MPap. 1: Flexural Strength (Method 1,0.05”/min) ASTM D790	ASTM D790 As the sheet prints it: Method 1 0.05”/min ASTM D790 print settings Build orientation is on side long edge. Tested parts were built on Fortus 400mc™ @ 0.010” (0.254 mm) slice.	not in the median: measured on a bar in another orientation
Izod impact strength orientation not stated	139 J/mp. 1: IZOD Impact, notched (Method A, 23 °C)	ASTM D256 As the sheet prints it: ASTM D256 (Method A) tested at 23 °C	not in the median: in J/m
HDT at 0.45 MPa	96 °Cp. 1: Heat Deflection (HDT) @ 66 psi, 0.125” unannealed ASTM D648	ASTM D648 As the sheet prints it: HDT 66 psi 0.125” unannealed ASTM D648 as printed unannealed	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	82 °Cp. 1: Heat Deflection (HDT) @ 264 psi, 0.125” unannealed ASTM D648	ASTM D648 As the sheet prints it: HDT 264 psi 0.125” unannealed ASTM D648 as printed unannealed	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	108 °Cp. 1: Glass Transition (Tg) DSC (SSYS)	DSC As the sheet prints it: Tg DSC SSYS	in the median
Vicat softening temperature	99 °Cp. 1: Vicat Softening Temp. (Rate B/50) ASTM D1525	ASTM D1525 As the sheet prints it: Rate B/50 ASTM D1525
Relative permittivity	2.9 - 2.7p. 1: Dielectric Constant	ASTM D150 As the sheet prints it: ASTM D150-98; orientation=flat vs vertical plaques (range)

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

Stratasys, ABS-M30i Data Sheet

What the maker says (6)

Good forABS-M30i is a high strength material well suited for the medical, pharmaceutical and food packaging industries.Stratasys, ABS-M30i Data Sheetp. 1
Good forWhen combined with Fortus® 3D Printers, ABS-M30i gives you biocompatible parts with excellent mechanical properties that are well suited for conceptual modeling, functional prototyping, manufacturing tools and production parts.Stratasys, ABS-M30i Data Sheetp. 1
Good forIn addition, ABS M30i has passed ISO 18562 testing for gas and airway parts for use in respiratory and ventilation medical devices.Stratasys, ABS-M30i Data Sheetp. 1
BenefitsParts manufactured with ABS-M30i material are biocompatible (ISO 10993 USP Class VI)* and can be gamma or EtO sterilized.Stratasys, ABS-M30i Data Sheetp. 1
BenefitsFood Safety Certification NSF 51 CertifiedStratasys, ABS-M30i Data Sheetp. 2
Supports and removalSoluble SupportsStratasys, ABS-M30i Data Sheetp. 2

Yousu Modified ABSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C65HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–250Bed, °C80–120Chamber, °CenclosedDrying, °C, h808 h

Yousu Modified ABSYousu

Published values

Property	As published	Conditions	On the Overview
Yousu, YOUSU Modified ABS 3D FILMAENT Technical Data Sheet4 valuesUnless a row says otherwise: specimen not stated
HDT	65 ℃p. 1: Heat Distortion Temp. GB/T 1634.2-2004 ℃	specimen not stated; its document points to a moulded or resin bar, GB/T 1634.2 As the sheet prints it: GB/T 1634.2-2004	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.057 g/cm3p. 1: Density GB/T 1033.1-2008 g/cm3	GB/T 1033.1 As the sheet prints it: GB/T 1033.1-2008
Melt mass-flow rate	2.6 g/10minp. 1: Melt Flow Rate GB/T 3682-2000 g/10min	GB/T 3682 As the sheet prints it: GB/T 3682-2000
Mould shrinkage orientation not stated	0.4-0.6 %p. 1: Mold Shrinkage GB/T 17037.4-2003 %	GB/T 17037.4 As the sheet prints it: GB/T 17037.4-2003

Print settings

Nozzle: 220–250 °Cown data sheet
Bed: 80–120 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 220-250℃; Bed 80-120℃Yousu, YOUSU Modified ABS 3D FILMAENT Technical Data Sheetp. 1: Recommended printing settings; p. 1: Bed Temp

Price

Not in the price sample.

Its 2 documents

eSUN ABS HTStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg40Nozzle, °C230–270Bed, °C55Chamber, °CenclosedDrying, °C, h808 h

eSUN ABS HTeSUN

Published values

Property	As published	Conditions	On the Overview
eSUN, eABS-HT Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value)
Tensile strength (yield or break not stated) orientation not stated	23.06 MPap. 1: Tensile Strength GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Elongation at break orientation not stated	3.78 %p. 1: Elongation at Break GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	2372.8 MPap. 1: Flexural Modulus GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Flexural strength orientation not stated	71.56 MPap. 1: Flexural Strength GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Izod impact strength	16.094 kJ/m2p. 1: IZOD Impact Strength GB/T 1843	GB/T 1843	not in the median: measured on a moulded bar
HDT at 0.45 MPa	104.35 ℃p. 1: Heat distortion Temperature	GB/T 1634 As the sheet prints it: GB/T 1634 0.45Mpa	not in the median: measured on a moulded bar
Density	1.04 g/cm3p. 1: Density GB/T 1033	specimen not stated, GB/T 1033

Print settings

Nozzle: 230–270 °Cown data sheet
Bed: 55 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230 - 270℃; Bed 55°CeSUN, eABS-HT Technical Data Sheetp. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: Based on Bambu P1S 0.4 mm nozzle; p. 2: Build Platform Temperature

Price

40 CAD/kgits one regular price in the sample

1 listing

DigitMakers: 40 CAD/kgeSUN ABS-HT Filament 1.75 mm 1kg - Black / Black (SKU ESUN-ABS-HT-1.75-1KG-BLK)in its price; seen 30 Sep 2026

Its 2 documents

What the maker says (3)

Good forHand-board applications • Automotive • Electronic and electrical applianceseSUN, eABS-HT Technical Data Sheetp. 1
BenefitsWear resistanceeSUN, eABS-HT Technical Data Sheetp. 1
BenefitsBased on the modification of ABS material, compared with various ABS materials, it has enhanced temperature resistance, with a heat deformation temperature as high as 100°C, and can meet high temperature application scenarios. eABS-HT inherits the good toughness and impact resistance of ABS and can print strong and durable parts.eSUN, eABS-HT Technical Data Sheetp. 1

eSUN eABS HSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–270Bed, °C100–110Chamber, °CenclosedDrying, °C, h808 h

eSUN eABS HSeSUN

Published values

Property	As published	Conditions	On the Overview
eSUN, eABS+HS Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value)
Tensile strength (yield or break not stated) orientation not stated	39 MPap. 1: Tensile Strength GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Elongation at break orientation not stated	21 %p. 1: Elongation at Break GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	1906 MPap. 1: Flexural Modulus GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Flexural strength orientation not stated	58 MPap. 1: Flexural Strength GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Izod impact strength	41 kJ/m2p. 1: IZOD Impact Strength	GB/T 1843	not in the median: measured on a moulded bar
HDT at 0.45 MPa	89 ℃p. 1: Heat distortion Temperature	GB/T 1634 As the sheet prints it: GB/T 1634 0.45Mpa	not in the median: measured on a moulded bar
Density	1.04 g/cm3p. 1: Density GB/T 1033	specimen not stated, GB/T 1033

Print settings

Nozzle: 230–270 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230 - 270℃; Bed 100-110°CeSUN, eABS+HS Technical Data Sheetp. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: Based on 0.4 mm nozzle; p. 2: Build Platform Temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (7)

Good formachine • Electrical and electroniceSUN, eABS+HS Technical Data Sheetp. 1
BenefitsStrong performance and toughnesseSUN, eABS+HS Technical Data Sheetp. 1
BenefitsThis material is optimized for high-speed printing, maintaining its performance even at higher speeds, providing an excellent printing experience.eSUN, eABS+HS Technical Data Sheetp. 1
Warping and shrinkageCompared to conventional ABS, it exhibits lower shrinkage and superior interlayer adhesion, reducing the likelihood of warping and cracking during printing.eSUN, eABS+HS Technical Data Sheetp. 1
Surface finishAdditionally, it can be acetone polished to eliminate layer lines and further enhance the print quality.eSUN, eABS+HS Technical Data Sheetp. 1
Odour and emissionsLow odoreSUN, eABS+HS Technical Data Sheetp. 1
Odour and emissionsIt contains low VOC (Volatile Organic Compounds) components, resulting in a reduced odor during the printing process, making it more comfortable and stress-free.eSUN, eABS+HS Technical Data Sheetp. 1

eSUN eABS MaxStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–270Bed, °C95–110Chamber, °CenclosedDrying, °C, h65≥ 3 h

eSUN eABS MaxeSUN

Published values

Property	As published	Conditions	On the Overview
eSUN, eABS Max Technical Data Sheet6 valuesUnless a row says otherwise: moulded bar (resin supplier's value)
Tensile strength (yield or break not stated) orientation not stated	45 MPap. 1: Tensile Strength GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Elongation at break orientation not stated	30 %p. 1: Elongation at Break GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	2400 MPap. 1: Flexural Modulus GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Flexural strength orientation not stated	58 MPap. 1: Flexural Strength GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Izod impact strength	48 kJ/m2p. 1: IZOD Impact Strength	GB/T 1843	not in the median: measured on a moulded bar
Density	1.05 g/cm3p. 1: Density GB/T 1033	specimen not stated, GB/T 1033

Print settings

Nozzle: 240–270 °Cown data sheet
Bed: 95–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 65 °C for ≥ 3 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 - 270℃; Bed 95 - 110°C; Drying 65℃/> 3heSUN, eABS Max Technical Data Sheetp. 2: Recommended printing settings; p. 2: Printing note

Price

Not in the price sample.

Its 2 documents

What the maker says (5)

Good forThe thermal deformation temperature is high, so it can be used in some outdoor and high temperature applications.eSUN, eABS Max Technical Data Sheetp. 1
Good forMachinery • Automobile • Illuminate • TrafficeSUN, eABS Max Technical Data Sheetp. 1
BenefitsModified on the basis of ABS,it has higher mechanical properties and UL94V-0 flame retardant performance.It is halogen-free,environment-friendly and flame retardant, reaching UL94V-0 level flame retardant, which is more fireproof and safereSUN, eABS Max Technical Data Sheetp. 1
Warping and shrinkageThe shrinkage of eABS Max material is large, so heat preservation should be paid attention to when printing, and it should be printed in a printer with closed chamber.eSUN, eABS Max Technical Data Sheetp. 2
Moisture sensitivityIt is recommended to use together with eBOX during printing.eSUN, eABS Max Technical Data Sheetp. 2

3D-Fuel Workday ABSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C100–110Chamber, °CenclosedDrying, °C, h804 h

3D-Fuel Workday ABS3D-Fuel

Published values

Property	As published	Conditions	On the Overview
3D-Fuel, Technical Data Sheet: Workday ABS12 valuesUnless a row says otherwise: moulded bar (resin supplier's value)after moisture conditioning
Tensile modulus orientation not stated	22,600 kg/cm2	ASTM D638 As the sheet prints it: 3.2mm 1mm/min D638	not in the median: measured on a moulded bar
Tensile yield strength orientation not stated	520 kg/cm2	ASTM D638 As the sheet prints it: 3.2mm Yield 50mm/min D638	not in the median: measured on a moulded bar
Elongation at break orientation not stated	30 %	ASTM D638 As the sheet prints it: 3.2mm Break 50mm/min D638	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	28,000 kg/cm2	ASTM D790 As the sheet prints it: 3.2mm 15mm/min D790	not in the median: measured on a moulded bar
Flexural strength orientation not stated	800 kg/cm2	ASTM D790 As the sheet prints it: 3.2mm 15mm/min D790	not in the median: measured on a moulded bar
Izod impact strength	8 kg·cm/cmp. 1: Izod Impact Strength, 6.4mm Notched @ -30°C (-22°F)	ASTM D256 As the sheet prints it: D256; thickness=6.4mm; notched tested at -30°C	not in the median: in J/m
Hardness	110 Rockwell R	ASTM D785 As the sheet prints it: D785	listed under other properties
HDT at 1.8 MPa	86 °Cp. 1: Heat Deflection Temperature, 6.4mm 18.6 kg	ASTM D648 As the sheet prints it: 6.4mm 18.6 kg D648	not in the median: measured on a moulded bar
Vicat softening temperature	94 °Cp. 1: Vicat Softening Temperature 5kg, 50°C/h D1525	ASTM D1525 As the sheet prints it: 5kg D1525
Melting temperature	held back: the sheet's unit or table layout is unclearheld backp. 1: Melt Temperature	no standard stated
Melt mass-flow rate	23 g/10minp. 1: Melt Flow Rate 220°C/10kg D1238	specimen not stated, ASTM D1238 As the sheet prints it: 220°C/10kg D1238 tested at 220°C
Mould shrinkage orientation not stated	0.4-0.7 %	ASTM D955 As the sheet prints it: Flow 3.2mm D955

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 80 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 - 260ºC; Bed 100 - 110ºC; Drying 80°C (176°F); Drying Time 2-4 hrs3D-Fuel, Technical Data Sheet: Workday ABSp. 1: Recommended printing settings; p. 2: Bed Material

Price

Not in the price sample.

Its 2 documents

What the maker says (6)

Good forWorkday ABS (Acrylonitrile Butadiene Styrene) is a go-to material for projects that require durability and the ability to withstand high temperatures.3D-Fuel, Technical Data Sheet: Workday ABSp. 1
Benefits3D-Fuel® Workday ABS is a consistent, low warp and low odor ABS that has been designed from the ground up for 3D printing and is the easiest ABS filament to print with.3D-Fuel, Technical Data Sheet: Workday ABSp. 1
BenefitsWorkday ABS has excellent durability and toughness.3D-Fuel, Technical Data Sheet: Workday ABSp. 1
Odour and emissionsABS can produce some off -gassing so it is highly recommended that you use it only in a well-ventilated area3D-Fuel, Technical Data Sheet: Workday ABSp. 1
Printing adviceABS requires a heated bed and works best with an enclosed print area.3D-Fuel, Technical Data Sheet: Workday ABSp. 1
Surface finish3D-Fuel® Workday ABS monofilament that provides low warp and low odor plus it is also heat resistant, durable, mildly flexible and can be sanded or smoothed with additional processing.3D-Fuel, Technical Data Sheet: Workday ABSp. 2

AzureFilm ABSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–260Bed, °C90–120Chamber, °CenclosedDrying, °C, h808 h

AzureFilm ABSAzureFilm

Sold as toughened or impact-modified: "AzureFilm ABS (Acrylonitrile Butadiene Styrene) is a filament with high butadiene content, specially designed for applications that require ultra high impact toughness combined with good thermal resistance." (AzureFilm, Technical Data Sheet ABS TDS, p. 1). The maker's statement, not a test result.

Published values

Property	As published	Conditions	On the Overview
AzureFilm, Technical Data Sheet ABS TDS7 valuesUnless a row says otherwise: Printed specimen at partial infill print settings 3D printer: AzureFilm; Nozzle temperature: 260 °C; Infill: 20 %; Slicer: Cura; Bed temperature: 90 °C; Shells: 2; Nozzle: 0,4 mm; Print speed: 50 mm/s; Layer height: 0,3 mm
Tensile modulus orientation not stated	1,0 MPaphysically implausiblep. 1: Tensile modulus	no standard stated	not in the median: physically implausible as published
Tensile strength (yield or break not stated) orientation not stated	24,2 MPap. 1: Tensile strength	no standard stated	not in the median: printed below 100 % infill
Elongation at break orientation not stated	5,6 %p. 1: Strain at break (Tensile)	no standard stated	not in the median: printed below 100 % infill
Tensile strain at strength orientation not stated	3,3 %p. 1: Strain at tensile strength [%]	no standard named As the sheet prints it: rate=50 mm/min	listed under other properties
Flexural modulus orientation not stated	1,6 GPap. 1: Flexural modulus	no standard stated	not in the median: printed below 100 % infill
Flexural strength orientation not stated	42,4 MPap. 1: Flexural strength	no standard stated	not in the median: printed below 100 % infill
Charpy impact strength orientation not stated	75,2 kJ/m²p. 1: Charpy unnotched [kJ/m2]	no standard statedtested at 23 °C	not in the median: printed below 100 % infill

Print settings

Nozzle: 230–260 °Cown data sheet
Bed: 90–120 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230 – 260 °C; Bed Not required (recommended 90 – 120 °C)AzureFilm, Technical Data Sheet ABS TDSp. 1: Recommended printing settings: Nozzle temperature, Heated bed; p. 1: Build platform

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

BenefitsAzureFilm ABS (Acrylonitrile Butadiene Styrene) is a filament with high butadiene content, specially designed for applications that require ultra high impact toughness combined with good thermal resistance.AzureFilm, Technical Data Sheet ABS TDSp. 1

Values are for the colour each sheet tested; pigment can change them.