PETG-ESD
9 products from 9 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
9 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- sold as toughened
- shared data sheet
- hardened nozzle
- not published
How the numbers are worked out
Polymaker PETG ESDStrength XY, MPa36.1Strength Z, MPa20.7Modulus XY, GPa1.98Charpy notched, kJ/m²5.7HDT 0.45, °C76HDT 1.8, °C72Price, CAD/kg94Nozzle, °C250–290Bed, °C70–80Chamber, °C25–50Drying, °C, h65
Polymaker PETG ESDPolymaker
Sold as toughened or impact-modified: "PolyMax™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry." (Polymaker, PolyMax™ PETG-ESD Technical Data Sheet, p. 2). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, FIBERON™ PETG-ESD Technical Data Sheet19 valuesThe same values also in Polymaker, PolyMax™ PETG-ESD Technical Data Sheet.Unless a row says otherwise: printed specimenprint settingsInfill 100%; Printing temperature 290 °C; Shell 2; Bed temperature 80 °C; Cooling fan OFF; Top & bottom layer 3 | |||
| Tensile modulus XY | 1983.0 ± 74.9 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1626.4 ± 31.5 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 36.1 ± 0.9 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 20.7 ± 0.6 MPap. 1: Tensile strength (Z)also in Polymaker, PolyMax™ PETG-ESD Technical Data Sheet | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 7.3 ± 0.7 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 1.8 ± 0.1 %p. 1: Elongation at break (Z)also in Polymaker, PolyMax™ PETG-ESD Technical Data Sheet | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 1650.8 ± 140.7 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1150.9 ± 75.6 MPap. 1: Bending modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 54.0 ± 2.5 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 24.1 ± 1.2 MPap. 1: Bending strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 5.7 ± 0.5 kJ/m2p. 1: Charpy impact strength (X-Y) notched | no standard stated | in the median |
| Charpy impact strength XY | 29.3 ± 2.2 kJ/m2p. 1: Charpy impact strength (X-Y)un-notched ISO 179, GB/T 1043 | ISO 179, GB/T 1043unnotched | not in the median: unnotched |
| Charpy impact strength Z | 5.2 ± 0.7 kJ/m2p. 1: Charpy impact strength (Z) un-notched | no standard statedunnotched | not in the median: unnotched |
| HDT at 0.45 MPa | 76 °Cp. 1: Heat deflection temp. ISO 75 0.45MPaalso in Polymaker, PolyMax™ PETG-ESD Technical Data Sheet | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO 75 | in the median |
| HDT at 1.8 MPa | 72 °Cp. 1: Heat deflection temp. ISO 75 1.8MPaalso in Polymaker, PolyMax™ PETG-ESD Technical Data Sheet | printed specimen (implied by the document), ISO 75As the sheet prints it: 1.8MPa ISO 75 | in the median |
| Vicat softening temperature | 86 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633also in Polymaker, PolyMax™ PETG-ESD Technical Data Sheet | specimen not stated, ISO 306, GB/T 1633print settings not stated | |
| Decomposition temperature | 373 °Cp. 1: Decomposition temp. TGA, 20°C/min | specimen not stated, TGAprint settings not stated | |
| Density | 1.24 g/cm3p. 1: Density ISO1183, GB/T1033also in Polymaker, PolyMax™ PETG-ESD Technical Data Sheet | specimen not stated, ISO 1183, GB/T 1033print settings not stated | |
| Melt mass-flow rate | 14 g/10minp. 1: Melt index 280°C, 5 kg | specimen not stated, no standard namedAs the sheet prints it: 280°C 5 kg | |
Polymaker, PolyMax™ PETG-ESD Technical Data Sheet8 valuesThe same values also in Polymaker, FIBERON™ PETG-ESD Technical Data Sheet.Unless a row says otherwise: printed specimenmoistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 270 °C Bed temperature 80 °C Shell 2 Top & bottom layer 4 Infill 100% Environmental temperature 25 °C Cooling fan OFF *All specimens were conditioned at room temperature for 24h prior to testing DISCLAIMER: The typical values presented in this data sheet are intended for reference and comparison pu | |||
| Tensile modulus XY | 1983 ± 66 MPap. 3: Young’s modulus (X-Y) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Tensile modulus Z | 1626 ± 34 MPap. 3: Young’s modulus (Z) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 36.1 ± 0.7 MPap. 3: Tensile strength (X-Y) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Elongation at break XY | 7.3 ± 0.5 %p. 3: Elongation at break (X-Y) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Flexural modulus XY | 1658 ± 164 MPap. 3: Bending modulus (X-Y) | ISO 178, GB/T 9341 | not in the median: another value of this product is in it |
| Flexural strength XY | 54.0 ± 3.0 MPap. 3: Bending strength (X-Y) | ISO 178, GB/T 9341 | not in the median: another value of this product is in it |
| Charpy impact strength XY | 5.7 ± 0.6 kJ/m2p. 3: Notched charpy impact strength (X-Y) | ISO 179, GB/T 1043 | not in the median: another value of this product is in it |
| Glass transition temperature | 77 °Cp. 3: Glass transition temperaturealso in Polymaker, FIBERON™ PETG-ESD Technical Data Sheet | DSCAs the sheet prints it: DSC, 10°C/min | in the median |
| Also named without a value: melting temperature, crystallization temperature, thermal conductivity. | |||
Print settings
- Nozzle
- 250–290 °Cown data sheet
- Bed
- 70–80 °Cown data sheet
- Heated chamber
- 25–50 °Cown data sheet
- Drying
- 65 °Cown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): heated chamber in Polymaker, PETG ESD official product page; drying in Polymaker, PETG ESD official product page.
Its 4 print profiles, in the documents' words
- Nozzle 250-290 (˚C); Bed 70-80 (˚C); Chamber Room temperature-50 (˚C); Drying 65 (˚C)Polymaker, PolyMax™ PETG-ESD Technical Data SheetRecommended printing settings
- Nozzle 250-290 °C; Bed 70-80 °C; Chamber Room temp.; Drying 65 °C/3HPolymaker, FIBERON™ PETG-ESD Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time
- Nozzle 250˚C - 290˚C; Bed 70˚C - 80˚C; Drying 70˚C for 8hPolymaker, PolyMax PETG-ESD product information sheetp. 4: My first print: Nozzle temperature; p. 4: Bed temperature; p. 6: Drying settings
- Nozzle 250-290 °C; Bed 70-80 °C; Drying 65˚C for 3h PolyDryer™ : Level 3 for 6h (Only if the material has absorbed moisture)Polymaker, PETG ESD official product pagep. 1: Technical Specifications
Price
94 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 94 CAD/kgPolymaker Fiberon PETG-ESD 1.75mm 500g (SKU PMK-FBR-PEG-ESD-500)in its price; seen 30 Sep 2026
Its 6 documents
What the maker says (12)
- Good for
PolyMax™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry.
Polymaker, PolyMax™ PETG-ESD Technical Data Sheetp. 2 - Good for
Fiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry.
Polymaker, FIBERON™ PETG-ESD Technical Data Sheetp. 1 - Good for
Electronics housings and enclosures
Polymaker, PETG ESD official product pagep. 1: Description, Ideal Applications - Pitfalls and limitations
Nozzle temperature and print orientation strongly affect surface resistivity. Higher nozzle temperatures lower resistivity; validate the finished part for the intended ESD requirement.
Polymaker, PETG ESD official product pagep. 1: Printing Tips, ESD validation - Pitfalls and limitations
Advanced Carbon Nanotube Compounding This filament is compounded with carbon nanotubes, which are responsible for its ESD-safe properties. The use of carbon nanotubes ensures consistent conductivity throughout the printed part, maintaining ESD protection even after machining or wear.
Polymaker, PETG ESD official product pagep. 1: Description, composition and wear claim - Pitfalls and limitations
The ESD (Electrostatic Discharge) safety of PETG-ESD filament can degrade over time, depending on environmental factors like humidity, temperature, and exposure to dust or contaminants. PETG-ESD filaments contain conductive additives, which can wear off or lose effectiveness due to surface abrasion or environmental wear. Typically, the ESD-safe properties should remain intact for 1-2 years under controlled conditions, but regular testing is recommended to ensure continued ESD performance. Storing parts in a clean, dry environment can help maintain their ESD properties longer.
Polymaker, PETG ESD official product pagep. 1: FAQ, ESD lifetime - Printing advice
It is recommended to use a hardened nozzle and clean the nozzle when you change the material to prevent partial clog.
Polymaker, PolyMax PETG-ESD product information sheetp. 4: My first print, prepare printer - Moisture sensitivity
It is recommended to store PolyMax™ PETG-ESD in the PolyBox™ to prevent moisture absorption which will lower the quality and the mechanical properties of the print.
Polymaker, PolyMax PETG-ESD product information sheetp. 5: My first print, prepare filament - Pitfalls and limitations
This Product Is Being Discontinued. Sale is Final And Not Eligible For Returns.
Polymaker, PolyMax PETG ESD official product pagep. 1: Product availability notice - Good for
Jigs and fixtures for PCB assembly
Polymaker, PETG ESD official product pagep. 1: Description, Ideal Applications - Good for
Trays and storage for electronic components
Polymaker, PETG ESD official product pagep. 1: Description, Ideal Applications - Good for
Tools and parts used in ESD-sensitive environments
Polymaker, PETG ESD official product pagep. 1: Description, Ideal Applications
Chemicals and environment (5)
- Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, PolyMax™ PETG-ESD Technical Data SheetEffect of weak acids - Acid resistance: limited
Fair-Poor
Effect of strong acids · strongPolymaker, PolyMax™ PETG-ESD Technical Data SheetEffect of strong acids - Alkali resistance: not resistant
Poor
Effect of weak alkalis · weakPolymaker, PolyMax™ PETG-ESD Technical Data SheetEffect of weak alkalis - Alkali resistance: not resistant
Poor
Effect of strong alkalis · strongPolymaker, PolyMax™ PETG-ESD Technical Data SheetEffect of strong alkalis - Oil and grease resistance: resistant
Good
Effect of oils and greasePolymaker, PolyMax™ PETG-ESD Technical Data SheetEffect of oils and grease
eSUN PETG-ESDStrength XY, MPa48.1Strength Z, MPa19.3Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C68HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C70Chamber, °C—Drying, °C, h65≥ 8 h
eSUN PETG-ESDeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, Technical Data Sheet PETG-ESD13 valuesUnless a row says otherwise: printed specimenprint settingsExtruder Temperature 240℃; Build Platform Temperature 70℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 40%; Based on Bambu P1S 0.4 mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 48.11 ± 0.535 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 19.34 ± 5.801 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 8.97 ± 1.62 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 2.52 ± 0.75 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 2162.79 ± 61.09 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 1483.12 ± 58.639 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 77.7 ± 0.7 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 41.2 ± 3.0 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 4.95 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 1.93 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 68 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 1.22 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033print settings not stated | |
| Surface resistivity | 10^9 Ωp. 1: Surface Resistance DIN IEC 60093 | specimen not stated, IEC 60093print settings not stated | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 65 °C for ≥ 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240-260℃; Bed 70℃; Drying 65℃ >8HeSUN, Technical Data Sheet PETG-ESDp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- DigitMakers: 50 per kg, sale priceeSUN PETG ESD Filament Black - 1.75 mm 1kg (SKU ESUN-PETG-ESD-175-1KG-BLCK)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 2 documents
What the maker says (3)
- Good for
With balanced strength, stiffness and toughness, it is suitable for areas that req uire electrostatic protection for precision electronic components, integrated circuits and their packages.
eSUN, Technical Data Sheet PETG-ESDp. 1 - Benefits
PETG-ESD is an antistatic modified material with excellent permanent antistatic effect, surface resistivity of 109 Ω, easy to print and smooth surface.
eSUN, Technical Data Sheet PETG-ESDp. 1 - Surface finish
Smooth Print Surface
eSUN, Technical Data Sheet PETG-ESDp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
Not resistant to light and ageing
UVeSUN, Technical Data Sheet PETG-ESDp.2: UV Resistance, source text line18
Fiberlogy ESD PET-GStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa2.4Charpy notched, kJ/m²3IzodHDT 0.45, °C75HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–265Bed, °C85Chamber, °C—Drying, °C, h604 h
Fiberlogy ESD PET-GFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ESD PET-G8 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 2400 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 48 MPap. 1: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 50 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2600 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 70 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 75 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 85 °Cp. 1: Glass Transition Temperature Tg DSC °C | specimen not stated, no standard stated | in the median |
| Fiberlogy, ESD PETG Filament2 valuesUnless a row says otherwise: specimen not stated | |||
| Izod impact strength orientation not stated | 3 kJ/m²p. 1: Izod impact strength (notched) @ 23°C | ISO 180tested at 23°C | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.3 g/cm³p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 250–265 °Cown data sheet
- Bed
- 85 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 250°C - 265°C; Bed 85°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ESD PET-Gp. 1: Recommended printing settings
- Nozzle 250–265°C; Bed 85°C; Drying 60°C / 4 hoursFiberlogy, ESD PETG Filamentp. 1: Exact product printing block; nozzle, bed, plate, enclosure and drying source-specific guidance
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Good for
The material was developed to effectively protect sensitive components from the destructive effects of electrostatic discharge (ESD).
Fiberlogy, ESD PETG Filamentp. 1
3DXTECH 3DXSTAT ESD PETGStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa1.8Charpy notched, kJ/m²—HDT 0.45, °C75HDT 1.8, °C—Price, CAD/kg183Nozzle, °C230–260Bed, °C60–90Chamber, °CnoneDrying, °C, h654 h
3DXTECH 3DXSTAT ESD PETG3DXTECH
Data sheet shared with MatterHackers ESD-Safe PETG: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, 3DXSTAT ESD PETG8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 250°C Bed Temp: 70°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 1800 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 50 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 13 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 1780 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 74 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 75 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Glass transition temperature | 80 °Cp. 1: Glass Transition Temperature (Tg) | DSC | in the median |
| Density | 1.28 g/ccp. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 230–260 °Cown data sheet
- Bed
- 60–90 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- No temperature stated3DXTECH, 3DXSTAT ESD PETGRecommended printing settings
- Nozzle 230-260C; Bed 60-90C; Chamber Not required; Drying 65C for 4 hours3DXTECH, 3DXSTAT™ ESD-PETGPrint Recommendations
- Nozzle 260-280C; Bed 60-90C; Chamber Not required; Drying 65C for 4 hours3DXTECH, 3DXSTAT™ ESD-PETGp. 1: Print Recommendations
Price
183 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- DigitMakers: 167 CAD/kg3DXSTAT ESD PETG Filament 750g Black / Black (SKU 3DSTAT-FL-PETG-ESD-1.75-750g-BLK)in its price; seen 30 Sep 2026
- 3D Printing Canada: 200 CAD/kgBlack - 1.75mm 3DXTech 3DXSTAT® ESD PETG Filament - 0.75 kg (SKU PTG2010750BK0)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (1)
- Odour and emissions
Very low odor emitted while printing
3DXTECH, 3DXSTAT™ ESD-PETGp. 1
MatterHackers ESD-Safe PETGStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa1.8Charpy notched, kJ/m²—HDT 0.45, °C75HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C100–110Chamber, °CnoneDrying, °C, h654 h
MatterHackers ESD-Safe PETGMatterHackers
Data sheet shared with 3DXTECH 3DXSTAT ESD PETG: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - PRO Series ESD-Safe PETG9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1800 MPap. 1: Tensile Modulus: | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 50 MPap. 1: Tensile Strength (Break): | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 13 %p. 1: Tensile Elongation (Break): | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 1780 MPap. 1: Flexural Modulus: | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 74 MPap. 1: Flexural Strength: | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 75 °Cp. 1: Heat Deflection Temp (0.45 MPa): | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 80 °Cp. 1: Glass Transition Temperature (Tg): | no standard stated | in the median |
| Density | 1.28 g/ccp. 1: Density: | ISO 1183 | |
| Surface resistivity | 10^7-10^9 Ωp. 1: Surface Resistance: 10^ | ASTM D257As the sheet prints it: 10^ ASTM D257 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 220–240 °C; Bed 100–110 °C; Chamber Not Required; Drying 65 °C for 4 hoursMatterHackers, PRO Series Black PRO Series ESD-Safe PETG Filament - 1.75mm (0.75kg)p. 1: Print Recommendations; p. 1: Drying Recommendations
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Nozzle wear
The ESD additive is non-abrasive, so both brass and hardened nozzles are compatible.
MatterHackers, PRO Series Black PRO Series ESD-Safe PETG Filament - 1.75mm (0.75kg)p. 1
Flashforge ESD PETGStrength XY, MPa35Strength Z, MPa—Modulus XY, GPa1.4Charpy notched, kJ/m²5IzodHDT 0.45, °C65HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C25–70Chamber, °C25–40Drying, °C, h70≥ 5 h
Flashforge ESD PETGFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet ESD PETG Filament10 values | |||
| Tensile modulus XY | 1400-1500 Mpap. 1: Modulus of Elasticity(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 35-40 Mpap. 1: Tensile Strength(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 5-8 %p. 1: Elongation at Break(X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 64-66 Mpap. 1: Bending Strength(X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Izod impact strength XY | 5-6 KJ/m2p. 1: Izod Impact Strength(X-Y) ISO 180 KJ/m2 | ISO 180notchedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 230 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| HDT at 0.45 MPa | 65 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 60 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.27-1.28 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.2 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 8-12 g/10minp. 1: Melt Index MFR (220℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 220℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 25–70 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- 70 °C for ≥ 5 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220~240℃ (240℃ recommended); Bed Room temperature~70℃ (60℃ recommended); Chamber Room temperature~40℃; Drying Using a hot dry air oven at 70℃ for at least 5 hours is recommendedFlashforge, Technical Data Sheet ESD PETG Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
It is an ideal filament for applications in automotive, aerospace, semiconductor industry, electronic and electrical industries.
Flashforge, Technical Data Sheet ESD PETG Filamentp. 1 - Benefits
ESD PETG, like PETG, has good dimensional stability, low warping, no cracking, and good antistatic performance as well.
Flashforge, Technical Data Sheet ESD PETG Filamentp. 1 - Benefits
Anti-static property/Easy-to-print property/Dimensional stability
Flashforge, Technical Data Sheet ESD PETG Filamentp. 1 - Supports and removal
Recommended Support Material Self-supporting
Flashforge, Technical Data Sheet ESD PETG Filamentp. 2 - Moisture sensitivity
As the ESD PETG filament absorbs moisture easily, it should be dried before being used.
Flashforge, Technical Data Sheet ESD PETG Filamentp. 3
Raise3D Industrial PETG ESDStrength XY, MPa36Strength Z, MPa—Modulus XY, GPa1.98Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C80Chamber, °C—Drying, °C, h606–12 h
Raise3D Industrial PETG ESDRaise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Raise3D, Raise3D Industrial PETG ESD Technical Data Sheet10 valuesUnless a row says otherwise: printed specimenprint settingsAll testing specimens were printed under the following conditions: nozzle temperature = 245 °C, printing speed = 45 mm/s, build plate temperature = 80 °C, infill = 100%. | |||
| Tensile modulus XY | 1983 ± 66 MPap. 2: Young’s modulus (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 36 ± 1 MPap. 2: Tensile strength (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 7.3 ± 0.5 %p. 2: Elongation at break (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 1658 ± 164 MPap. 2: Bending modulus (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 54 ± 3 MPap. 2: Bending strength (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 5.7 ± 0.6 kJ/m²p. 2: Charpy impact strength (X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Glass transition temperature | 77 °Cp. 1: Glass transition temperature DSC, 10 °C/min | DSCprint settings not stated | in the median |
| Vicat softening temperature | 86 °Cp. 1: Vicat transition temperature ISO 306 GB/T 1633 | ISO 306, GB/T 1633 | |
| Density | 1.24 g/cm³p. 1: Density | ASTM D792print settings not stated | |
| Melt mass-flow rate | 14 g/10 minp. 1: Melt index 280 °C, 5 kg | specimen not stated, no standard namedAs the sheet prints it: 280 °C 5 kg | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 6–12 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Raise3D, PETG ESD.
Its 2 print profiles, in the documents' words
- Bed 80 °CRaise3D, Raise3D Industrial PETG ESD Technical Data Sheetp. 2: Printing Notifications 2 (bed temperature). The nozzle temperature printed under "All testing specimens were printed under the following conditions" is the test bars'
- Nozzle 260-280℃; Bed 70-80℃; Drying 60℃ for 6-12 hoursRaise3D, PETG ESDp. 1: Printing Guide: Recommended Print Settings; Printing Notifications
Price
Not in the price sample.
Its 3 documents
What the maker says (11)
- Good for
Thanks to its excellent printability, chemical resistance and electrostatic dissipative properties, PETG ESD is ideal for applications in automotive, aerospace, general manufacturing and electronic industry.
Raise3D, Raise3D Industrial PETG ESD Technical Data Sheetp. 1 - Good for
Industrial PETG ESD filament is ideal for uses such as housings, casings, jigs and fixtures where electrostatic discharge (ESD) protection is required.
Raise3D, Raise3D Industrial PETG ESD Technical Data Sheetp. 1 - Benefits
Raise3D Industrial PETG ESD filament is an electrostatic discharge-safe printing material based on carbon nanotube-filled PETG.
Raise3D, Raise3D Industrial PETG ESD Technical Data Sheetp. 1 - Odour and emissions
Odor / Almost odorless
Raise3D, Raise3D Industrial PETG ESD Technical Data Sheetp. 1 - Printing advice
Due to dispersed CNTs (Carbon Nano Tubes) in PETG ESD, we recommend to print model with higher infill density and minimal wall thickness of 1.5 mm for a better interlayer bonding quality and ESD property.
Raise3D, Raise3D Industrial PETG ESD Technical Data Sheetp. 2 - Printing advice
For a better bed adhesion, brim or raft are recommended and set bed temperature at 80 °C.
Raise3D, Raise3D Industrial PETG ESD Technical Data Sheetp. 2 - Benefits
Consistent and reliable surface resistance
Raise3D, PETG ESDp. 1 - Benefits
Excellent chemical resistance
Raise3D, PETG ESDp. 1 - Benefits
Good impact resistance
Raise3D, PETG ESDp. 1 - Benefits
Easy to Print
Raise3D, PETG ESDp. 1 - Adhesion between layers
Due to dispersed CNTs (Carbon Nano Tubes) in PETG ESD, we recomend to print model with higher infill density and minimal wall thickness of 1.5 mm for a better interlayer bonding quality and ESD property.
Raise3D, PETG ESDp. 1
Spectrum petg esdStrength XY, MPa48Strength Z, MPa—Modulus XY, GPa1.95Charpy notched, kJ/m²—HDT 0.45, °C72HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–260Bed, °C60–80Chamber, °CnoneDrying, °C, h—
Spectrum petg esdSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, petg esd11 valuesThe same values also in Spectrum, TECHNICAL DATA SHEET PETG ESD.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1950 MPap. 1: Tensile Modulusalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D638As the sheet prints it: D 638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 26 MPap. 1: Tensile Stress at Yieldalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D638As the sheet prints it: D 638 | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 48 MPap. 1: Tensile Stress at Breakalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D638As the sheet prints it: D 638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 58,00%p. 1: Elongation at Breakalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D638As the sheet prints it: D 638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 4,30%transcription correctedp. 1: Elongation at Yieldalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D638As the sheet prints it: D 638 | listed under other properties |
| Flexural modulus orientation not stated | 1980 MPap. 1: Flexural Modulusalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D790As the sheet prints it: D 790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 64 MPap. 1: Flexural Strengthalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D790As the sheet prints it: D 790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 108 Rockwell Rtranscription correctedp. 1: Rockwell Hardness, R Scalealso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D785 | |
| HDT | 72°Cp. 1: Heat Deflection Temperaturealso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D648As the sheet prints it: D 648 | not in the median: set apart (never used to pass), no stated test load |
| Density | 1.23 g/cm3p. 1: Specific Gravityalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | ASTM D792As the sheet prints it: D 792 | |
| Density | 1.19 g/cm3p. 1: Densityalso in Spectrum, TECHNICAL DATA SHEET PETG ESD | no standard stated | |
Print settings
- Nozzle
- 230–260 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 230-260°C; Bed 60-80°CSpectrum, petg esdRecommended printing settings; p. 1: Dry box recommended
- Nozzle 230-260°C; Bed 60-80°CSpectrum, TECHNICAL DATA SHEET PETG ESDp. 1: Recommended printing settings; p. 1: Dry box recommended
Price
Not in the price sample.
Its 3 documents
What the maker says (9)
- Benefits
Spectrum PETG ESD is a high-quality antistatic filament, developed from a proprietary polymer blend to provide long-lasting protection against electrostatic discharge (ESD).
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Benefits
Permanent and stable antistatic properties
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Benefits
Performance independent of ambient humidity
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Benefits
High mechanical and chemical resistance
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Surface finish
Surface finish semi-matte
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Surface finish
Attractive matte surface finish
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Adhesion between layers
Excellent interlayer adhesion and dimensional stability
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET PETG ESDp. 1
Nanovia PETG ESDStrength XY, MPa43Strength Z, MPa—Modulus XY, GPa2.13Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C245–255Bed, °C85–90Chamber, °C20Drying, °C, h608 h
Nanovia PETG ESDNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanovia7 valuesUnless a row says otherwise: printed specimenprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | |||
| Tensile modulus XY | 2130 MPap. 1: Young’s modulus (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1A | in the median |
| Tensile modulus orientation not stated | 2265 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1A | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 43 MPap. 1: Ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1A | in the median |
| Tensile strain at strength XY | 3.4 %p. 1: Elongation ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1A | listed under other properties |
| Tensile strain at strength orientation not stated | 3.2 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1A | listed under other properties |
| Glass transition temperature | 80 °Cp. 1: Tg | specimen not stated, no standard statedprint settings not stated | in the median |
| Density | 1.32 g/cm3p. 1: Density | specimen not stated, ISO 1183print settings not stated | |
Print settings
- Nozzle
- 245–255 °Cown data sheet
- Bed
- 85–90 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- 60 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 245 – 255 °C; Bed 85 – 90 °C; Chamber 20 °C; Drying Dehydrate for 8h at 60 °C prior to printing.Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal)
Price
Not in the price sample.
Its 3 documents
What the maker says (9)
- Good for
Its thermal resistance up to 80°C allows allows for the intergration of potentially warm electronics such as motherboards.
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Good for
Ideal for : circuit boards, containers, couplings, ESD storages
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Good for
Suited for clean rooms / doesn’t leave any trace
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Benefits
Nanovia PETG ESD prevents the accumulation of static electricity by gradually discharging it.
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Benefits
It can house circuits and components that go up to 80 °C and doesn’t leave any residue in the case of friction unlike carbon based ESD filaments.
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Benefits
Unlike other ESD carbon based composites, Nanoiva PETG ESD does not leave any marks and is usable in clean rooms.
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Benefits
Nanovia PETG ESD ease of printing makes it compatible with most commercially available 3D printers and does not require a heated enclosure.
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Surface finish
For the ESD properties to be active, Nanovia PETG ESD parts should not be covered with paints.
Nanovia, Nanovia PETG ESD : Antistatic discharge : Nanoviap. 1 - Pitfalls and limitations
The product is not approved for medical applications.
Nanovia, PETG ESD official material safety data sheetp. 2: Section7.2 safe storage/use exclusion
Chemicals and environment (1)
- Organic solvent resistance: described in words
Some Organic solvents could degrade the material.
Nanovia, PETG ESD official material safety data sheetp. 2: Section10.3 possible side reactions
No product matches "".
Values are for the colour each sheet tested; pigment can change them.