PLA blend
9 products from 5 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
9 products
Key
- set apart: test bar not described as printed, or no stated load
- sold as toughened
- shared data sheet
- hardened nozzle
- converted price
- not published
How the numbers are worked out
BigRep PRO HTStrength XY, MPa45Modulus XY, GPa3.1Charpy notched, kJ/m²8HDT 0.45, °C61HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C50–70Chamber, °C—Drying, °C, h504–6 h
BigRep PRO HTBigRep
Only 2.85 mm filament was found; the H2C takes 1.75 mm.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BigRep, FILAMENT PRO HT10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3100 MPap. 1: Tensile Modulus (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 1: Tensile Strength (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3000 MPap. 1: Flexural Modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 60 MPap. 1: Flexural Strength (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 8 kJ/m²p. 1: Impact Strength, Notched (ISO 179) | ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 61 °Cp. 1: HDT B - 0.45 MPa (ISO 75) | ISO 75As the sheet prints it: ISO 75; 0.45 MPa; method=B | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 60 °Cp. 1: Glass Transition Temperature (Tg) (DSC) | DSCAs the sheet prints it: DSC; method=DSC | in the median |
| Vicat softening temperature | 116 °Cp. 1: Vicat Softening Temperature (ISO 306) | ISO 306 | |
| Melting temperature | 170 °Cp. 1: Melting Temperature (Tm) (DSC) | DSCAs the sheet prints it: DSC; method=DSC | |
| Density | 1.3 g/cm³p. 1: Density (ISO 1183) | ISO 1183 | |
| BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRep1 value | |||
| Charpy impact strength orientation not stated | 8 kJ/m²p. 1: Impact Strength, Notched (ISO 179) | ISO 179 | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 50 °C for 4–6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 190 - 230 °C; Bed 50 - 70 °C; Drying 50 °C for 4 - 6 hoursBigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1: Recommended Printing Conditions; Other Information
- Nozzle 190 - 230 °C; Bed 50 - 70 °C; Drying 50 °C for 4 - 6 hoursBigRep, FILAMENT PRO HTp. 1: Recommended Printing Conditions; p. 1: Other Information: Drying Recommendations
Price
Not in the price sample.
Its 3 documents
What the maker says (15)
- Benefits
Incredibly easy to print and producing consistently beautiful results, BigRep’s PRO HT is one of our best-selling filaments for good reason.
BigRep, FILAMENT PRO HTp. 1 - Benefits
BigRep PRO HT is a well-rounded filament choice for many different applications.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Good for
Its balanced performance and reasonable price make PRO HT a great all-around material, perfect for prototypes and some end-use parts such as custom auto interiors.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Benefits
PRO HT is ductile and impact resistant, with a flexural strength of 60 MPa and a notched impact strength of 8 kJ/m².
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Pitfalls and limitations
PRO HT is recommended for lower temperature applications with its heat deflection temperature (HDT B) of 61°C.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Pitfalls and limitations
PRO HT is not UV resistant and is recommended for undoor applications.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Good for
It is non-toxic and suitable for food contact applications.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Benefits
BigRep materials are high quality and come with a Certificate of Analysis to ensure reliable performance.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Good for
With spool sizes up to 8 kg, BigRep filaments are optimized for large-scale 3D prints with complex geometries.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Moisture sensitivity
Drying recommendations 50 °C for 4 - 6 hours
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Printing advice
Yes, the BigRep PRO HT is compatible with all open material system 3D printers with a heated print bed and adequate temperature extrusion capabilities (190-230°C).
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Odour and emissions
Yes, it is, as long as the room has good ventilation or an air filtration system for the safety and comfort of the people using the 3D printer.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Moisture sensitivity
ABS is a slightly hygroscopic material which means it absorbs moisture from the air which affects the print quality. We recommend filament storage with a dryer such as the DRYCON which keeps the filament in perfect condition.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Supports and removal
PLA is somewhat stronger and resistant to impact, while PRO HT is less brittle and many customers find support removal particularly easy.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1 - Moisture sensitivity
PRO HT filament has a long shelf life if stored properly in a cool, dry place with minimal exposure to moisture or UV light.
BigRep, PRO HT Filament - Versatile 3D Printing Material | BigRepp. 1
BigRep HI-TEMPStrength XY, MPa50Modulus XY, GPa4.4Charpy notched, kJ/m²4HDT 0.45, °C58HDT 1.8, °C54Price, CAD/kg—Nozzle, °C190–230Bed, °C50–70Chamber, °C—Drying, °C, h504–6 h
BigRep HI-TEMPBigRep
Only 2.85 mm filament was found; the H2C takes 1.75 mm.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BigRep, HI-TEMP filament datasheet10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 4400 MPap. 1: Tensile Modulus (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 50 MPap. 1: Tensile Strength (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 4300 MPap. 1: Flexural Modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 55 MPap. 1: Flexural Strength (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 4 kJ/m2p. 1: Impact Strength, Notched (ISO 179) | ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 58 °Cp. 1: HDT B - 0.45 MPa (ISO 75) | ISO 75As the sheet prints it: HDT B - 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 54 °Cp. 1: HDT A - 1.8 MPa (ISO 75) | ISO 75As the sheet prints it: HDT A - 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 154 °Cp. 1: Vicat Softening Temperature (ISO 306) | ISO 306 | |
| Melting temperature | 170 °Cp. 1: Melting Temperature (Tm) (DSC) | DSC | |
| Density | 1.35 g/cm3p. 1: Density (ISO 1183) | ISO 1183 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 50 °C for 4–6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190 - 230 °C; Bed 50 - 70 °C; Drying 50 °C for 4 - 6 hoursBigRep, HI-TEMP filament datasheetp. 1: Recommended Printing Conditions and Other Information
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Warping and shrinkage
Especially stiff with minimal warping
BigRep, HI-TEMP filament datasheetp. 1 - Precision and tolerance
produces rigid, highly accurate parts
BigRep, HI-TEMP filament datasheetp. 1 - Surface finish
with an attractive matte surface finish.
BigRep, HI-TEMP filament datasheetp. 1 - Moisture sensitivity
Drying Recommendations 50°C for4 - 6 hours
BigRep, HI-TEMP filament datasheetp. 1
Extrudr GREENTECStrength XY, MPa46Modulus XY, GPa3.2Charpy notched, kJ/m²12HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C20–90Chamber, °CnoneDrying, °C, hnone
Extrudr GREENTECExtrudr
Data sheet shared with Fabru GreenTEC: their values are one table, recorded once.
Sold as toughened or impact-modified: "is optimised for high impact resistance" (Extrudr, TECHNICAL DATA SHEET GREENTEC, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET GREENTEC12 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 3200 MPap. 1: Tensile modulus (E-Modulus) ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 46 MPap. 1: Tensile strength ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Tensile break strength | 18 MPap. 1: Stress at break ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at break | 14 %p. 1: Nominal elongation at break ISO 527-2 % | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a moulded bar |
| Tensile strain at strength | 3 %p. 1: Elongation at strenght ISO 527 % | ISO 527 | listed under other properties |
| Charpy impact strength | 19 kJ/m2p. 1: Notched impact strength ISO 179/1eA kJ/m2 | ISO 179As the sheet prints it: ISO 179/1eA | not in the median: measured on a moulded bar |
| Charpy impact strength | 218 kJ/m2p. 1: Unnotched impact strength ISO 179/1eU kJ/m2 | ISO 179As the sheet prints it: ISO 179/1eU | not in the median: measured on a moulded bar |
| Vicat softening temperature | 115 °Cp. 1: VICAT A (VST) ISO 3146-C °C | ISO 3146As the sheet prints it: ISO 3146-C | |
| Melting temperature | 180-200 °Cp. 1: Melting temperature ISO 1133 °C | specimen not stated, ISO 1133 | |
| Density | 1.3 g/cm³p. 1: Density ISO 1183 g/cm³ | specimen not stated, ISO 1183 | |
| Melt mass-flow rate | 8 g/10minp. 1: MFR ISO 75 g/10min | specimen not stated, ISO 75 | |
| Mould shrinkage orientation not stated | 0.5 %p. 1: Shrinking | specimen not stated, ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, GreenTEC2 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bartested at 23 °C | |||
| Charpy impact strength orientation not stated | 12 kJ/m²p. 1: Charpy notched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 228 kJ/m²p. 1: Charpy unnotched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: unnotched |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 20–90 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 200-230°C; Bed 20-90°CExtrudr, TECHNICAL DATA SHEET GREENTECp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
- Nozzle 200–230 °C; Bed 20–90 °C; Drying GreenTEC does not require drying before use to achieve optimal print quality; Drying temperature 60 °C Drying time 0–4 hExtrudr, GreenTECp. 1: Print Settings; Drying
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Benefits
is optimised for high impact resistance
Extrudr, TECHNICAL DATA SHEET GREENTECp. 1
Fabru GreenTECStrength XY, MPa46Modulus XY, GPa3.2Charpy notched, kJ/m²12HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–230Bed, °C50–90Chamber, °CnoneDrying, °C, h802 h
Fabru GreenTECFabru
Data sheet shared with Extrudr GREENTEC: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Fabru, GreenTEC (purefil material data sheet)8 valuesUnless a row says otherwise:print settingsTechnische Daten table; no specimen, print or conditioning conditions stated | |||
| Tensile modulus orientation not stated | 3200 MPap. 1: Zug-E-Modul (Technische Daten) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 46 MPap. 1: Streckspannung (Technische Daten) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 14 %p. 1: Reissdehnung (Technische Daten) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 3 %p. 1: Streckdehnung (Technische Daten) | ISO 527 | listed under other properties |
| Vicat softening temperature | 115 °Cp. 1: Vicat Erweichungstemperatur A (Technische Daten) | ISO 306 | |
| Density | 1.30 g/cm3p. 1: Dichte (Technische Daten) | no standard stated | |
| Melt volume-flow rate | 4 cm /10min cm3/10minp. 1: MFR (Technische Daten) | ISO 1133 | |
| Mould shrinkage | 0.5 %p. 1: Schwindung (Technische Daten) | ISO 294As the sheet prints it: ISO 294-4, 2577 | |
Print settings
- Nozzle
- 180–230 °Cown data sheet
- Bed
- 50–90 °Cown data sheet
- Heated chamber
- not requiredExtrudr GREENTEC's data sheet, shared
- Drying
- 80 °C for 2 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 180-230 °C; Bed 50-90 °C; Drying Trocknungstemperatur 80°C, Trocknungsdauer 2hFabru, GreenTEC (purefil material data sheet)p. 1: Verarbeitungsdaten
Price
Not in the price sample.
Its 2 documents
What the maker says (11)
- Benefits
GreenTEC ist ein Biokunststoff, welcher eine hohe Zug- und Biegefestigkeit hat.
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
GreenTEC ist eine ökologische Alternative zu anderen technischen Kunststoffen, bestehend aus 100% nachwachsenden Rohstoffen und nach DIN EN ISO 14855 biologisch abbaubar.
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
GreenTEC Filament lässt sich besonders leicht auf allen handelsüblichen 3D-Druckern verarbeiten.
Fabru, GreenTEC (purefil material data sheet)p. 1 - Printing advice
Für die Verarbeitung sind ähnliche Temperaturen wie bei PLA erforderlich.
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
Die Wärmebeständigkeit ist mit 115°C (VST) relativ hoch.
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
Dieses Filament erfüllt die Anforderungen an die Zusammensetzung der europäischen Verordnung Nr. 10/2011 über Kunststoffmaterialien für Lebensmittelkontakt.
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
Biologisch abbaubar
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
aus 100% erneuerbaren Rohstoffen
Fabru, GreenTEC (purefil material data sheet)p. 1 - Warping and shrinkage
Geringer Schwund
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
Gute Zug- und Biegefestigkeit
Fabru, GreenTEC (purefil material data sheet)p. 1 - Benefits
Höhere Temperaturbeständigkeit als PLA
Fabru, GreenTEC (purefil material data sheet)p. 1
Fabru GreenTEC ProStrength XY, MPa50Modulus XY, GPa4.4Charpy notched, kJ/m²—HDT 0.45, °C115HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–250Bed, °C50–90Chamber, °C—Drying, °C, h802 h
Fabru GreenTEC ProFabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, GreenTEC Pro9 values | |||
| Tensile modulus orientation not stated | 4400 MPap. 1: Tensile modulus (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 50 MPap. 1: Yield stress (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3.4 %p. 1: Elongation at break (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 3 %p. 1: Elongation at yield (ISO 527) | ISO 527 | listed under other properties |
| HDT at 0.45 MPa | 115 °Cp. 1: Heat deflection temperature | ISO 75As the sheet prints it: 0.45 MPa (ISO 75-2) | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 160 °Cp. 1: Vicat softening temperature A | no standard stated | |
| Density | 1.39 g/cm3p. 1: Density | no standard stated | |
| Melt mass-flow rate | 12 g/10minp. 1: MFR (ISO 1133) | ISO 1133 | |
| Mould shrinkage orientation not stated | 0.5 %p. 1: Shrinkage (ISO 294-4, 2577) | ISO 294As the sheet prints it: 2577 ISO 294-4 | |
Print settings
- Nozzle
- 190–250 °Cown data sheet
- Bed
- 50–90 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 2 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-250 °C; Bed 50-90 °C; Drying 80°C, 2hFabru, GreenTEC Prop. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Benefits
Compared to GreenTEC, GreenTEC Pro has an increased heat resistance and is therefore particularly suitable for high-temperature applications.
Fabru, GreenTEC Prop. 1 - Benefits
GreenTEC Pro is an ecological alternative to other technical plastics, consisting of 100% renewable raw materials and biodegradable according to DIN EN ISO 14855.
Fabru, GreenTEC Prop. 1 - Benefits
GreenTEC Pro Filament can be processed particularly easily on all commercially available 3D printers.
Fabru, GreenTEC Prop. 1 - Warping and shrinkage
Little shrinkage
Fabru, GreenTEC Prop. 1 - Odour and emissions
Odor free
Fabru, GreenTEC Prop. 1 - Printing advice
Temperatures similar to those of PLA are required for processing.
Fabru, GreenTEC Prop. 1
Spectrum Greeny ProStrength XY, MPa53Modulus XY, GPa5.1Charpy notched, kJ/m²—HDT 0.45, °C84HDT 1.8, °C—Price, CAD/kg47Nozzle, °C190–220Bed, °C0–45Chamber, °CnoneDrying, °C, h504 h
Spectrum Greeny ProSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET Greeny Pro11 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 5100 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 53 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 52.5 MPap. 1: Tensile stress at yield | ISO 527 | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 51 MPap. 1: Tensile stress at break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 2.2 %p. 1: Tensile strain at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 1.95 %p. 1: Tensile strain at yield | ISO 527 | listed under other properties |
| Tensile strain at strength orientation not stated | 1.9%p. 1: Strain at tensile strength | ISO 527As the sheet prints it: ISO 527; Mechanical Properties | listed under other properties |
| Charpy impact strength | 45 kJ/m2p. 1: Charpy Impact Strength (23°C) | ISO 179As the sheet prints it: 23°C ISO 179/1eU | not in the median: unnotched |
| HDT at 0.45 MPa | 84 °Cp. 1: Heat Deflection Temperature 0.45mn/m2 STORAGE AND SHELF LIFE | ISO 75As the sheet prints it: 0.45mn/m2 ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 160 °Cp. 1: Vicat Softening Temperature | ISO 306 | |
| Density | 1.34 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 190 - 220°C; Bed 0 - 45°CSpectrum, TECHNICAL DATA SHEET Greeny Prop. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: settings footnote
- Drying 50°C, 4h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
46.9 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 46.9 CAD/kgSpectrum GreenyPro Traffic Black, 1,75 mm / 1000 g (SKU SPC-80901)in its price; 3DJake International (European storefront) lists 29.2 EUR for 1 kg: 29.2 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 4 documents
What the maker says (13)
- Benefits
High impact resistance
Spectrum, TECHNICAL DATA SHEET Greeny Prop. 1 - Benefits
Excellent flexural strength
Spectrum, TECHNICAL DATA SHEET Greeny Prop. 1 - Benefits
Biodegradable according to DIN EN ISO 14855
Spectrum, TECHNICAL DATA SHEET Greeny Prop. 1 - Surface finish
Semi-matte print finish
Spectrum, TECHNICAL DATA SHEET Greeny Prop. 1 - Benefits
Easy to print
Spectrum, TECHNICAL DATA SHEET Greeny Prop. 1 - Benefits
Food safe and FDA compliant
Spectrum, TECHNICAL DATA SHEET Greeny Prop. 1 - Benefits
PLA / Bio-performance filaments are eco-friendly, easy-to-print 3D materials.
Spectrum, PLA / Bio-performance Filamentsp. 1 - Good for
Perfect for decorative models, prototypes, and everyday prints.
Spectrum, PLA / Bio-performance Filamentsp. 1 - Benefits
PLA / Bio-performance filaments combine easy printing, high-quality results, and environmentally friendly materials .
Spectrum, PLA / Bio-performance Filamentsp. 1 - Good for
Ideal for both home projects and more demanding educational or design applications.
Spectrum, PLA / Bio-performance Filamentsp. 1 - Good for
This category covers filaments suitable for hobby printing, prototyping, education, and light functional parts .
Spectrum, PLA / Bio-performance Filamentsp. 1 - Good for
Versatile use
Spectrum, PLA / Bio-performance Filamentsp. 1 - Benefits
Eco-friendly cardboard spool
Spectrum, PLA / Bio-performance Filamentsp. 1
Spectrum GreenyHTStrength XY, MPa52Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C87HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C0–45Chamber, °CnoneDrying, °C, h454 h
Spectrum GreenyHTSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET GreenyHT8 valuesThe same values also in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 900 MPaphysically implausiblep. 1: Tensile modulus | ISO 527As the sheet prints it: ISO 527-1 | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) orientation not stated | 52 MPap. 1: Tensile strength | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 4,70%p. 1: Tensile Break at Strain | ISO 527As the sheet prints it: EN ISO 527-1; Mechanical properties | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3000 MPap. 1: Flexural Modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 87 °Cp. 1: Heat Deflection Temperature 0,45 MPaalso in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO | ISO 75As the sheet prints it: 0,45 MPa ISO 75-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 98 °Cp. 1: VICAT Softening Temperature | ISO 306 | |
| Density | 1,54 g/cm3p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1/A | |
| Melt mass-flow rate | 20 g/10minp. 1: performance biopolymer. In terms of rigidity and MFR (190°C, 2,16kg) hardness, it significantly outperforms classic PLA | ISO 1133As the sheet prints it: 190°C 2 16kg ISO 1133 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 45 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): hardened nozzle in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO, Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29.
Its 4 print profiles, in the documents' words
- Nozzle 190-220°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET GreenyHTp. 1: Recommended printing settings; p. 1: settings footnote
- Nozzle 190-220 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Drying 45°C, 4h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
Not in the price sample.
Its 6 documents
- Spectrum, TECHNICAL DATA SHEET GreenyHT
- Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29
- Spectrum, Filament drying - Spectrum Filaments
- Spectrum, PLA / Bio-performance Filaments
What the maker says (14)
- Benefits
base material approved for food contact
Spectrum, TECHNICAL DATA SHEET GreenyHTp. 1 - Benefits
GreenyHT filament is intended for users who demand ease of printing, delivered with enhanced thermal resistance, high rigidity and a matt, rough surface.
Spectrum, TECHNICAL DATA SHEET GreenyHTp. 1 - Benefits
biodegradable and compostable
Spectrum, TECHNICAL DATA SHEET GreenyHTp. 1 - Surface finish
rough, matt print finish
Spectrum, TECHNICAL DATA SHEET GreenyHTp. 1 - Surface finish
The surface irregularity and matt look effectively mask the layers of printed part.
Spectrum, TECHNICAL DATA SHEET GreenyHTp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET GreenyHTp. 1 - Nozzle wear
Ruby or hardened nozzle recommended
Spectrum, TECHNICAL DATA SHEET GreenyHTp. 1 - Benefits
High heat resistance, biodegradable, plasticizer-free, increased rigidity & hardness
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Benefits
PLA / Bio-performance filaments are eco-friendly, easy-to-print 3D materials.
Spectrum, PLA / Bio-performance Filamentsp. 1 - Good for
Perfect for decorative models, prototypes, and everyday prints.
Spectrum, PLA / Bio-performance Filamentsp. 1 - Benefits
PLA / Bio-performance filaments combine easy printing, high-quality results, and environmentally friendly materials .
Spectrum, PLA / Bio-performance Filamentsp. 1 - Good for
Ideal for both home projects and more demanding educational or design applications.
Spectrum, PLA / Bio-performance Filamentsp. 1 - Good for
This category covers filaments suitable for hobby printing, prototyping, education, and light functional parts .
Spectrum, PLA / Bio-performance Filamentsp. 1 - Benefits
plasticiser-free
Spectrum, PLA / Bio-performance Filamentsp. 1
3DJake niceBIOStrength XY, MPa55Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg54Nozzle, °C200–230Bed, °C0–60Chamber, °C—Drying, °C, h—
3DJake niceBIO3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE niceBIO9 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 55 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 5100 MPap. 1: Flexural modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 43 kJ/ m²p. 1: Impact strength | ISO 179As the sheet prints it: ISO 179-1/1eA | not in the median: notch not stated |
| HDT at 0.45 MPa | 54 °Cp. 1: HDT / B | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 146 °Cp. 1: VICAT A | ISO 306 | |
| Melting temperature | 190 °Cp. 1: Melting temperature | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1,33 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 7 g/10 minp. 1: MFR 210 °C/2,16kg | ISO 1133As the sheet prints it: 210 °C/2 16kg ISO 1133 | |
| Mould shrinkage orientation not stated | 0,4 %p. 1: Shrinking | ISO 294As the sheet prints it: ISO 294-4 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 200 – 230 °C; Bed ± 0-60˚C3DJake, Technical Data Sheet 3DJAKE niceBIOp. 1: Recommended printing settings
- Nozzle 200-230 ° C; Bed 0 - 60 °C3DJake, 3DJAKE niceBIO Blackp. 1: Recommended processing temperature; p. 1: Recommended heating temperature
Price
53.6 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 53.6 CAD/kg3DJAKE niceBIO Black, 1,75 mm / 750 g (SKU CLP-NICEBIO-BLACK-0750-175)in its price; 3DJake International (European storefront) lists 25 EUR for 0.75 kg: 33.3 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 3 documents
What the maker says (18)
- Moisture sensitivity
All spools are sealed and packed with silica gel to avoid humidity.
3DJake, Technical Data Sheet 3DJAKE niceBIOp. 1 - Warping and shrinkage
Due to its low tendency to warp 3DJAKE niceBIO can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE niceBIOp. 1 - Printing advice
If you have a heated bed the recommended temperature is ± 0-60˚C.
3DJake, Technical Data Sheet 3DJAKE niceBIOp. 1 - Printing advice
niceBIO can be used on all common desktop FDM or FFF technology 3D printers.
3DJake, Technical Data Sheet 3DJAKE niceBIOp. 1 - Moisture sensitivity
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
3DJake, Technical Data Sheet 3DJAKE niceBIOp. 1 - Benefits
Bio-filament with excellent thermal & mechanical properties
3DJake, 3DJAKE niceBIO Blackp. 1 - Surface finish
Matt surface
3DJake, 3DJAKE niceBIO Blackp. 1 - Benefits
High heat resistance
3DJake, 3DJAKE niceBIO Blackp. 1 - Benefits
High impact resistance
3DJake, 3DJAKE niceBIO Blackp. 1 - Benefits
3DJake niceBIO is a premium bio filament that combines excellent thermal and mechanical properties with full biodegradability.
3DJake, 3DJAKE niceBIO Blackp. 1 - Printing advice
As it does not require a heated print bed, it can be processed on almost any FDM printer.
3DJake, 3DJAKE niceBIO Blackp. 1 - Adhesion between layers
Models printed with niceBIO feature outstanding layer adhesion and a refined matte finish.
3DJake, 3DJAKE niceBIO Blackp. 1 - Benefits
Excellent thermal and mechanical stability for durable, high-performance parts
3DJake, 3DJAKE niceBIO Blackp. 1 - Benefits
High impact resistance for strong, resilient prints
3DJake, 3DJAKE niceBIO Blackp. 1 - Adhesion between layers
Outstanding layer adhesion for stable, homogeneous models without weak points
3DJake, 3DJAKE niceBIO Blackp. 1 - Odour and emissions
Odour-free during printing
3DJake, 3DJAKE niceBIO Blackp. 1 - Surface finish
Attractive matte surface finish
3DJake, 3DJAKE niceBIO Blackp. 1 - Benefits
Biodegradable in accordance with DIN EN ISO 14855
3DJake, 3DJAKE niceBIO Blackp. 1
Extrudr GREENTEC PROStrength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg75Nozzle, °C210–230Bed, °C20–90Chamber, °CnoneDrying, °C, hnone
Extrudr GREENTEC PROExtrudr
Sold as toughened or impact-modified: "built-in flexibility for improved impact resistance" (Extrudr, GreenTEC Pro, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET GREENTEC PRO12 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 4300 MPap. 1: Tensile modulus (E-Modulus) ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 58 MPap. 1: Tensile strength ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Tensile break strength | 53 MPap. 1: Stress at break ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Tensile strain at strength | 2.8 %p. 1: Elongation at strenght ISO 527 % | ISO 527 | listed under other properties |
| Charpy impact strength | 4 kJ/m2p. 1: Notched impact strength ISO 179/1eA kJ/m2 | ISO 179As the sheet prints it: ISO 179/1eA | not in the median: measured on a moulded bar |
| Charpy impact strength | 71 kJ/m2p. 1: Unnotched impact strength ISO 179/1eU kJ/m2 | ISO 179As the sheet prints it: ISO 179/1eU | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 115 °Cp. 1: HDT/B ISO 75 °C | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 160 °Cp. 1: VICAT A (VST) ISO 306 °C | ISO 306 | |
| Melting temperature | 180-200 °Cp. 1: Melting temperature ISO 3146-C °C | specimen not stated, ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.35 g/cm³p. 1: Density ISO 1183 g/cm³ | specimen not stated, ISO 1183 | |
| Melt mass-flow rate | 9 g/10minp. 1: MFR ISO 1133 g/10min | specimen not stated, ISO 1133 | |
| Mould shrinkage orientation not stated | 0.4 %p. 1: Shrinking | specimen not stated, ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, GreenTEC Pro2 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bartested at -30 °C | |||
| Charpy impact strength orientation not stated | 3 kJ/m²p. 1: Charpy notched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: tested below room temperature |
| Charpy impact strength orientation not stated | 55 kJ/m²p. 1: Charpy unnotched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: unnotched |
| Extrudr, Material Safety Data Sheet: GREENTEC PRO2 valuesUnless a row says otherwise: specimen not stated | |||
| Melting temperature | 190-210°Cp. 3: MELTING RANGE | no standard stated | |
| Density | 1.39g/cm³p. 3: DENSITY | no standard stated | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 20–90 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 210-230°C; Bed 20-90°CExtrudr, TECHNICAL DATA SHEET GREENTEC PROp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
- Nozzle 210–230 °C; Bed 20–90 °C; Drying GreenTEC Pro does not require drying before use to achieve optimal print quality; Drying temperature 60 °C Drying time 0–4 hExtrudr, GreenTEC Prop. 1: Print Settings; Drying
Price
75.4 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 75.4 CAD/kgExtrudr Green-TEC PRO Black, 1.75 mm / 800 g (SKU EX-9010241426027)in its price; 3DJake International (European storefront) lists 37.5 EUR for 0.8 kg: 46.9 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 4 documents
What the maker says (1)
- Benefits
built-in flexibility for improved impact resistance
Extrudr, GreenTEC Prop. 1
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.