TPE, maker-undisclosed elastomer
5 products from 2 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
5 products
Key
- set apart: test bar not described as printed, or no stated load
- added filler or additive
- hardened nozzle
- not published
How the numbers are worked out
Nanovia ISTROFLEXStrength XY, MPa11.5Modulus XY, GPa0.06Nozzle, °C210–230Bed, °C20–40Chamber, °C20Drying, °C, h604 h
Nanovia ISTROFLEXNanovia
Modified: declared dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanovia8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 60 MPap. 1: Tensile modulus | ISO 527 | not in the median: added filler or additive |
| Tensile break strength orientation not stated | 11.5 MPap. 1: Stress at break | ISO 527 | not in the median: added filler or additive |
| Elongation at break orientation not stated | > 300 %p. 1: Elong. at break | ISO 527 | not in the median: added filler or additive |
| Hardness | 44 Shore Dp. 1: Hardness | no standard stated | not in the median: added filler or additive |
| Hardness | 93 Shore Ap. 1: Hardness (Shore A) | no standard stated | not in the median: added filler or additive |
| Vicat softening temperature | 91 °Cp. 1: VICAT | ISO 306 | |
| Density | 1.55 g/cm3p. 1: Density | ISO 1183 | |
| Melt mass-flow rate | 2,7-4,9 g/10minp. 1: MFR | ISO 1133 | |
| Nanovia, Nanovia ISTROFLEX – Material Safety Data Sheet2 valuesUnless a row says otherwise: specimen not stated | |||
| Glass transition temperature | -32 °Cp. 2: Section 9.1: Tg | no standard stated | |
| Density | 1,34 g/cm3p. 2: Section 9.1: Density | no standard stated | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 20–40 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed 20 – 40 °C; Chamber 20 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1: Recommended printing settings; p. 1: Application recommendations (drying); p. 1: Nozzle (minimum)
Price
Not in the price sample.
Its 3 documents
What the maker says (11)
- Benefits
Compostable according to norm EN 13432, this filament is certified without endocrine disruptors.
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Adhesion between layers
Nanovia Istroflex is characterized by a very good build plate and inter layer adhesion.
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Printing advice
For a bettter print result, a lower retraction speed is recommended.
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Good for
Using Nanovia Istroflex, biodegradable oyster shell based composite 3D filament, 3D print every day use flexible projects.
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Good for
Its flexibillity is perfectly suited for technical parts that require a certain amount of give or bounce such as shock and vibration absorbers, silent blocks, gaskets, interstitial constricted materials, etc…
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Benefits
Biodegradable and compostable
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Adhesion between layers
Excellent inter layer adhesion
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Benefits
Endocrine pertubatur free certified
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Moisture sensitivity
Store in airtight container with desiccant, out of direct sunlight.
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Moisture sensitivity
Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1 - Printing advice
It is possible to sand thick layers of Nanovia Istroflex.
Nanovia, Nanovia ISTROFLEX : Biodegradable flexible : Nanoviap. 1
Flashforge FABRIAL-RStrength XY, MPa18Modulus XY, GPa0.15Nozzle, °C140–160Bed, °C80–100Chamber, °C—Drying, °C, h—
Flashforge FABRIAL-RFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Flashforge, テクニカルデータシート FABRIAL-R (TPE) [Technical Data Sheet FABRIAL-R, Japanese]9 valuesUnless a row says otherwise: printed specimenprint settingsMechanical properties table (機械的特性); test pieces formed by a 3D printer | |||
| Tensile modulus orientation not stated | 150 MPap. 1: 引張弾性率 (tensile modulus, JIS K 7161, 1 mm/min) | JIS K 7161As the sheet prints it: JIS K 7161 (1mm/分) | in the median |
| Tensile yield strength orientation not stated | 10 MPap. 1: 引張降伏強度 (tensile yield strength, JIS K 7161, 50 mm/min) | JIS K 7161As the sheet prints it: JIS K 7161 (50mm/分) | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 18 MPap. 1: 引張破断強度 (tensile strength at break, JIS K 7161, 50 mm/min) | JIS K 7161As the sheet prints it: JIS K 7161 (50mm/分) | in the median |
| Elongation at break orientation not stated | > 400 %p. 1: 引張破断伸度 (tensile elongation at break, JIS K 7161, 50 mm/min) | JIS K 7161As the sheet prints it: JIS K 7161 (50mm/分) | in the median |
| Flexural modulus orientation not stated | 150 MPap. 1: 曲げ弾性率 (flexural modulus, JIS K 7171, 2 mm/min) | JIS K 7171As the sheet prints it: JIS K 7171 (2mm/分) | not in the median: the only value of its test, shown as published |
| Flexural strength orientation not stated | 10 MPap. 1: 曲げ強度 (flexural strength, JIS K 7171, 100 mm/min) | JIS K 7171As the sheet prints it: JIS K 7171 (100mm/分) | not in the median: the only value of its test, shown as published |
| Izod impact strength orientation not stated | 58 kJ/m2p. 1: ノッチ付きアイゾット衝撃試験(23℃) (notched Izod impact, JIS K 7110) | JIS K 7110tested at 23 °C | not in the median: to another standard |
| Hardness | 90 Shore Ap. 1: 硬度 (hardness, durometer, Shore A) | no standard namedAs the sheet prints it: Durometer | in the median |
| Melt mass-flow rate | 10 g/10 minp. 1: 流動性 (melt flow, JIS K 7210) | JIS K 7210As the sheet prints it: JIS K 7210 (150℃ 2.16Kg) | |
Print settings
- Nozzle
- 140–160 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 140 - 160 ℃; Bed 80 - 100 ℃Flashforge, テクニカルデータシート FABRIAL-R (TPE) [Technical Data Sheet FABRIAL-R, Japanese]p. 1: 造形時プリンター推奨条件 (recommended printer conditions when forming)
Price
Not in the price sample.
Its 2 documents
Nanovia Flex VXStrength XY, MPa—Modulus XY, GPa—Nozzle, °C210–230Bed, °C20–40Chamber, °C20Drying, °C, h604 h
Nanovia Flex VXNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia Flex VX : Virucide flexible ISO 21702 : Nanovia6 valuesUnless a row says otherwise: specimen not stated | |||
| Hardness | 32 Shore Dp. 1: Hardness | ISO 868 | in the median |
| Glass transition temperature | -32 °Cp. 1: Tg | no standard stated | |
| Vicat softening temperature | 91 °Cp. 1: VICAT | ISO 306 | |
| Continuous service temperature | 60 °Cp. 1: Max usage temperature | no standard stated | |
| Density | 1,25 g/cm3p. 1: Density | ASTM D792 | |
| Melt mass-flow rate | 2.7-4.9 g/10minp. 1: MFR | ISO 1133 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 20–40 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed 20 – 40 °C; Chamber 20 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia Flex VX : Virucide flexible ISO 21702 : Nanoviap. 1: Recommended printing settings; p. 1: Application recommendations (drying); p. 1: Nozzle (minimum)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
Handles and flexible handle covers
Nanovia, Nanovia Flex VX : Virucide flexible ISO 21702 : NanoviaUsage, four bullets, published bullet/heading 1 - Good for
Antibacterian orthopedic soles
Nanovia, Nanovia Flex VX : Virucide flexible ISO 21702 : NanoviaUsage, four bullets, published bullet/heading 2 - Good for
Touch pads
Nanovia, Nanovia Flex VX : Virucide flexible ISO 21702 : NanoviaUsage, four bullets, published bullet/heading 3 - Good for
Covering of computer equipment
Nanovia, Nanovia Flex VX : Virucide flexible ISO 21702 : NanoviaUsage, four bullets, published bullet/heading 4
Nanovia TPE 22DStrength XY, MPa—Modulus XY, GPa0.012Nozzle, °C220–240Bed, °C30–50Chamber, °C20Drying, °C, h504 h
Nanovia TPE 22DNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanovia3 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 12 MPap. 1: Traction modulus | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 22 Shore Dp. 1: Hardness | no standard stated | in the median |
| Density | 1,00 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 30–50 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 50 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220 – 240 °C; Bed 30 – 50 °C; Chamber 20 °C; Drying Dehydrate for 4h at 50°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1: Recommended printing settings: Extrusion temperature; p. 1: Application recommendations (drying)
Price
Not in the price sample.
Its 2 documents
What the maker says (13)
- Good for
Nanovia TPE 22D is a flexible filament of a shore hardness 22D / 70A that makes it possible to 3D print shock and vibration absorbers.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Adhesion between layers
It has particularly strong inter lays adhesion and wear resistance.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Adhesion between layers
Nanovia TPE 22D allows for the creation of flexible parts, with excellent inter-layer adhésion.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Good for
Easy to print, this material largely used for industrial shock and vibration absorption, as well as parts that need to deform dramatically.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Benefits
Great flexibility
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Adhesion between layers
Great inter-layer adhesion
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Benefits
Shock resistant
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Moisture sensitivity
Store in airtight container with desiccant, out of direct sunlight.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Moisture sensitivity
Dehydrate for 4h at 50°C prior to printing after prolonged exposure to humidity.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Printing advice
Due to its flexible nature, a direct drive extruder is recommended.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Printing advice
There should be little to no tension between the spool and the extruder to prevent the permanent stretching of the filament, which can cause under extrusion.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Pitfalls and limitations
Due to its softness, it is not possible to sand Nanovia TPE 22D.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1 - Odour and emissions
We recommend printing Nanovia TPE 22D in a room equipped with air extraction or by using appropriate breathing equipment.
Nanovia, Nanovia TPE 22D : Flexible shock absorption : Nanoviap. 1
Nanovia Flex B4CStrength XY, MPa—Modulus XY, GPa—Nozzle, °C220–240Bed, °C40–60Chamber, °C20Drying, °C, h604 h
Nanovia Flex B4CNanovia
Modified: declared dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia Flex B4C : Neutron capture : Nanovia2 valuesUnless a row says otherwise: specimen not stated | |||
| Continuous service temperature | 70 °Cp. 1: Useage temperature | no standard stated | |
| Density | 1,45 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 220 – 240 °C; Bed 40 – 60 °C; Chamber 20 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia Flex B4C : Neutron capture : Nanoviap. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Application recommendations (drying); p. 1: Nozzle (minimal)
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Good for
Its semi-rigid base, allows for structural components, still able to deform when necessary and absorb shocks. This combination makes Nanovia Flex B4C particularly suited for tools, maintenance equipment, and transport vessels for fragile materials.
Nanovia, Nanovia Flex B4C : Neutron capture : NanoviaDescription, semi-rigid base paragraph
No product matches "".
Not published by any product: tensile strength (Z), notched impact and price.
Values are for the colour each sheet tested; pigment can change them.