Nylon-GF, maker-undisclosed polyamide
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- not published
How the numbers are worked out
Eumakers PA Nylon Glass FiberStrength XY, MPa95Modulus XY, GPa2.53HDT 0.45, °C—HDT 1.8, °C160Nozzle, °C240–260Bed, °C20Drying, °C, h—
Eumakers PA Nylon Glass FiberEumakers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eumakers, PA NYLON GLASS FIBER Polymer Technical Data Sheet10 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 2534 MPap. 3: Elastic Modulus (Mpa) | ISO 527As the sheet prints it: ISO 527; infill=100 %; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | in the median |
| Elongation at break XY | 9,20 %p. 3: Elongation at Break (%) | ISO 527As the sheet prints it: ISO 527; infill=100 %; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | in the median |
| Flexural modulus XY | 3131 MPap. 4: Flexural Modulus (Mpa), xy - parallel, 100 % | ISO 178As the sheet prints it: ISO 178; infill=100%; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | in the median |
| Flexural modulus orientation not stated | 2820 MPap. 4: Flexural Modulus (Mpa), xy - normal, 100 % | ISO 178As the sheet prints it: ISO 178; infill=100 %; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | not in the median: another value of this product is in it |
| Flexural strength XY | 125,0 MPap. 4: Flexural Strength (Mpa), xy - parallel, 100 % | ISO 178As the sheet prints it: ISO 178; infill=100%; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | in the median |
| Flexural strength orientation not stated | 110,3 MPap. 4: Flexural Strength (Mpa), xy - normal, 100 % | ISO 178As the sheet prints it: ISO 178; infill=100 %; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | not in the median: another value of this product is in it |
| Izod impact strength XY | 52,80 kJ/m² KJ/m²p. 4: Impact Strength (KJ/m²), xy - parallel, 100 % | ISO 180As the sheet prints it: ISO 180; infill=100 %; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | not in the median: notch not stated |
| Izod impact strength orientation not stated | 53,60 kJ/m² KJ/m²p. 4: Impact Strength (KJ/m²), zy - normal, 100 % | ISO 180As the sheet prints it: ISO 180; infill=100%; nozzle=Olsson Ruby; nozzle temp=260° C; bed=70° C; speed=40 mm/s; infill orientation=45° C; printer=Ultimaker 2+ | not in the median: notch not stated |
| Density | 1,07 g/ccp. 2: Density | specimen not stated, ISO 1183 | |
| Dielectric strength | 35 kV/mmp. 5: Dielectric Strength | specimen not stated, IEC 60243As the sheet prints it: IEC 60243 - 1 | |
| Eumakers, PA NYLON GLASS FIBER Filament Technical Data Sheet7 values | |||
| Tensile modulus orientation not stated | 4000 MPap. 2: Tensile Modulus | no standard namedAs the sheet prints it: 527 | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) orientation not stated | 95 MPap. 2: Tensile Strength | no standard namedAs the sheet prints it: 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 80 Kj/m²p. 2: Impact Strenght | no standard namedAs the sheet prints it: 179/2-1eU | not in the median: unnotched |
| HDT at 1.8 MPa | 160° Cp. 2: Heat Deflection Temp. HDT/A | no standard namedAs the sheet prints it: HDT/A; 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 180° Cp. 2: Melting Point | no standard namedAs the sheet prints it: 11357 | |
| Continuous service temperature | 90° - 120° Cp. 2: Max Usage Temp. Long Term | no standard namedAs the sheet prints it: 2578 | |
| Density | 1,18 g/cm³p. 2: Density | no standard namedAs the sheet prints it: 1183 | |
| Eumakers, MSDS Glass Fiber (Eumakers)1 value | |||
| Melting temperature | 178° - 190° C °Cp. 6: Melting Point | no standard stated | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 20 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 240° - 260° C; Bed 20° C (Not Necessary)Eumakers, PA NYLON GLASS FIBER Filament Technical Data Sheetp. 3: Recommended Printing Temperature; p. 3: Recommended Bed Temperature
- Nozzle 240° - 260° C; Bed 60° - 70° CEumakers, PA NYLON GLASS FIBER Polymer Technical Data Sheetp. 5: Suggested Print Temperature; p. 5: Suggested Bed Temperature
- Nozzle 240°-260°; Bed 20° C (Not necessary)Eumakers, EUMAKERS Store PA Filament | Color: Nylon Glass Fiber Translucent Whitep. 1: Recommended printing temperature; p. 1: Recommended bed temperature; p. 1: N.B. (nozzles)
Price
Not in the price sample.
Its 5 documents
Filamatrix Nylon Glass EnhancedStrength XY, MPa59.4Modulus XY, GPa—HDT 0.45, °C152HDT 1.8, °C—Nozzle, °C255Bed, °C70Drying, °C, h7512 h
Filamatrix Nylon Glass EnhancedFilamatrix
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Filamatrix, Nylon Glass Enhanced Technical Data Sheet7 valuesUnless a row says otherwise: printed specimen | |||
| Tensile yield strength XY | 8610 psip. 1: Tensile Strength at Yield/ psi * | ASTM D638As the sheet prints it: ASTM D638, Type IV; infill=100 %; tested in an independent lab | in the median |
| Elongation at break XY | 7 %p. 1: Tensile Elongation/ % * | ASTM D638As the sheet prints it: ASTM D638, Type IV; infill=100 %; tested in an independent lab | in the median |
| Flexural modulus XY | 619 kpsip. 1: Flexural Modulus/ kpsi * | ASTM D790As the sheet prints it: ASTM D790; infill=100 %; tested in an independent lab | in the median |
| Flexural strength XY | 19.1 kpsip. 1: Flexural Peak Stress / kpsi * | ASTM D790As the sheet prints it: ASTM D790; infill=100 %; tested in an independent lab | in the median |
| Izod impact strength XY | 154 J/mp. 1: Notched Izod Impact/ Jm-1 * | ASTM D256As the sheet prints it: ASTM D256; infill=100 %; tested in an independent lab | not in the median: in J/m |
| HDT at 0.45 MPa | 152 °Cp. 1: Heat Deflection Temperature/ °C * | ASTM D648As the sheet prints it: ASTM D648 at 66 psi; infill=100 %; tested in an independent lab | in the median |
| Density | 1.24 g/cm3p. 1: Density (gcm-3) | specimen not stated, ASTM D792 | |
Print settings
- Nozzle
- 255 °Cown data sheet
- Bed
- 70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 75 °C for 12 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Filamatrix, Nylon Glass Fiber 3D Printer Filament 500g & 1kg - Filamatrix; bed in Filamatrix, Nylon Glass Fiber 3D Printer Filament 500g & 1kg - Filamatrix.
Its 3 print profiles, in the documents' words
- Nozzle 255 °C; Bed 70 °CFilamatrix, Nylon Glass Enhanced Technical Data Sheetp. 1: Nozzle temperature*; p. 1: Heated bed temperature; p. 1: Bed material; p. 1: Nozzles
- Nozzle 245 - 265 °C; Bed 60 - 80 °C; Drying Recommended drying temperature: 75 °C; For Nylon Glass, dry six to twelve hours at 75° C (165° F)Filamatrix, Nylon Glass Fiber 3D Printer Filament 500g & 1kg - Filamatrixp. 1: Drying; p. 1: Recommended nozzle temperature; p. 1: Recommended bed temperature; p. 1: Tips for optimal printing; p. 1: Tips for optimal printing
- No temperature statedFilamatrix, Which Nylon Filament Is Right for Me? | Filamatrixp. 1: Nylon Glass
Markforged Onyx GFStrength XY, MPa60.4Modulus XY, GPa3.1HDT 0.45, °C—HDT 1.8, °C—Nozzle, °C—Bed, °C—Drying, °C, h—
Markforged Onyx GFMarkforged
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Markforged, COMPOSITE MATERIAL DATASHEET30 valuesUnless a row says otherwise: printed specimenafter moisture conditioningConditioned: 52% RH and 23 ± 2°C for 44 ± 2 h, ASTM D618 Procedure Aprint settingsPrinted on an FX10 with a layer height of 125 μm and default solid fill settings (pp. 1-2) | |||
| Tensile modulus XY | 3.1 ± 0.1 GPap. 1: Tensile Modulus, XY Orientation | ASTM D638As the sheet prints it: D638¹ (ASTM D638 type I beams) | not in the median: measured after moisture conditioning |
| Tensile modulus XY | 3.1 ± 0.1 GPap. 2: Mechanical properties in different environments, Tensile Modulus, Dry | no standard stated | in the median |
| Tensile modulus XY | 1.9 ± 0.1 GPap. 2: Mechanical properties in different environments, Tensile Modulus, Wet | no standard stated | not in the median: measured after moisture conditioning |
| Tensile modulus Z (ZX) | 1.5 ± 0.2 GPap. 2: Tensile Modulus, ZX Orientation | printed part, no standard stated | not in the median: measured after moisture conditioning |
| Tensile modulus XZ | 4.2 ± 0.2 GPap. 2: Tensile Modulus GPa | no standard stated | not in the median: measured after moisture conditioning |
| Tensile yield strength XY | 57.9 ± 0.7 MPap. 1: Tensile Strength at Yield, XY Orientation | ASTM D638As the sheet prints it: D638¹ (ASTM D638 type I beams) | not in the median: measured after moisture conditioning |
| Tensile yield strength XY | 60.4 ± 1.9 MPap. 2: Mechanical properties in different environments, Tensile Strength at Yield, Dry | no standard stated | in the median |
| Tensile yield strength XY | 41.7 ± 0.7 MPap. 2: Mechanical properties in different environments, Tensile Strength at Yield, Wet | no standard stated | not in the median: measured after moisture conditioning |
| Tensile yield strength XZ | 73.7 ± 2.1 MPap. 2: Tensile Strength at Yield MPa | no standard stated | not in the median: measured after moisture conditioning |
| Tensile break strength XY | 56.5 ± 0.9 MPap. 1: Tensile Strength at Break, XY Orientation | ASTM D638As the sheet prints it: D638¹ (ASTM D638 type I beams) | not in the median: measured after moisture conditioning |
| Tensile break strength XY | 59.4 ± 1.7 MPap. 2: Mechanical properties in different environments, Tensile Strength at Break, Dry | no standard stated | not in the median: another value of this product is in it |
| Tensile break strength XY | 40.4 ± 0.9 MPap. 2: Mechanical properties in different environments, Tensile Strength at Break, Wet | no standard stated | not in the median: measured after moisture conditioning |
| Tensile break strength Z (ZX) | 25.9 ± 3.5 MPap. 2: Tensile Strength at Break, ZX Orientation | printed part, no standard stated | not in the median: measured after moisture conditioning |
| Tensile break strength XZ | 70.7 ± 1.8 MPap. 2: Tensile Strength at Break MPa | no standard stated | not in the median: measured after moisture conditioning |
| Elongation at break XY | 6.2 ± 0.6 %p. 1: Elongation at Break, XY Orientation | ASTM D638As the sheet prints it: D638¹ (ASTM D638 type I beams) | not in the median: measured after moisture conditioning |
| Elongation at break XY | 5.5 ± 0.3 %p. 2: Mechanical properties in different environments, Elongation at Break, Dry | no standard stated | in the median |
| Elongation at break XY | 21.9 ± 3.0 %p. 2: Mechanical properties in different environments, Elongation at Break, Wet | no standard stated | not in the median: measured after moisture conditioning |
| Elongation at break Z (ZX) | 3.2 ± 0.3 %p. 2: Elongation at Break, ZX Orientation | printed part, no standard stated | not in the median: measured after moisture conditioning |
| Elongation at break XZ | 5.9 ± 0.4 %p. 2: Elongation at Break % | no standard stated | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 2.4 ± 0.1 GPap. 1: Flexural Modulus, XY Orientation | ASTM D790As the sheet prints it: D790 | not in the median: measured after moisture conditioning |
| Flexural strength XY | 88.2 ± 2.4 MPap. 1: Flexural Strength, XY Orientation | ASTM D790As the sheet prints it: D790 | not in the median: measured after moisture conditioning |
| Izod impact strength XY | 161 ± 9 J/mp. 1: Notched Izod Impact Resistance, XY Orientation | ASTM D256As the sheet prints it: D256 A³ (12.7 mm wide, printed with a notch) | not in the median: in J/m |
| Compression strength XY | 71.8 ± 4.0 MPap. 1: Compressive Strength, XY Orientation | ASTM D695As the sheet prints it: D695² (an accredited third party test facility) | |
| HDT at 1.8 MPa | 138 °Cp. 1: Heat Deflection Temperature (1.8 MPa) | ASTM D648As the sheet prints it: Heat Deflection Temperature (1.8 MPa) D648 A⁴ (measured via DMA using an internal method based on ASTM D648) | not in the median: measured after moisture conditioning |
| Thermal conductivity | 0.280 ± 0.002 W/(m*K)p. 1: Thermal Conductivity | ASTM E1530As the sheet prints it: E1530² (an accredited third party test facility) | |
| Coefficient of thermal expansion XY | 35.8 μm/(m*°C) µm/m/Kp. 1: Mean CTE (30 to 50°C), XY Orientation | ASTM E831As the sheet prints it: E831² (an accredited third party test facility) | |
| Coefficient of thermal expansion XY | 45.7 μm/(m*°C) µm/m/Kp. 1: Mean CTE (60 to 160°C), XY Orientation | ASTM E831As the sheet prints it: E831² (an accredited third party test facility) | |
| Coefficient of thermal expansion ZX | 121 μm/(m*°C) µm/m/Kp. 2: Mean CTE (30 to 50°C), ZX Orientation | ASTM E831As the sheet prints it: E831² (an accredited third party test facility; p. 1) | |
| Coefficient of thermal expansion ZX | 284 μm/(m*°C) µm/m/Kp. 2: Mean CTE (60 to 160°C), ZX Orientation | ASTM E831As the sheet prints it: E831² (an accredited third party test facility; p. 1) | |
| Density | 1.21 ± 0.01 g/cm³p. 1: Density | specimen not stated, no standard statedmoisture state not stated | |
Print settings
No print settings on file for this product.
What the maker says (10)
- Good for
Onyx GF is a chopped-glass-fiber-filled nylon filament built for industrial tooling and end-use parts.
Markforged, COMPOSITE MATERIAL DATASHEETp. 1: HIGH-STRENGTH COLOR COMPOSITE, first sentence - Benefits
It delivers the surface finish, dimensional accuracy, and print reliability of Onyx with added functional color and non-conductive properties.
Markforged, COMPOSITE MATERIAL DATASHEETp. 1 - Good for
Compatible with Continuous Fiber Reinforcement, Onyx GF can be reinforced for higher-load applications where structural performance is critical.
Markforged, COMPOSITE MATERIAL DATASHEETp. 1 - Surface finish
Available in six colors, Onyx GF brings visual differentiation to the factory floor without added process steps.
Markforged, COMPOSITE MATERIAL DATASHEETp. 1 - Good for
Select colors support safety compliance and error-proofing workflows where color-coded, identifiable tooling is an operational requirement.
Markforged, COMPOSITE MATERIAL DATASHEETp. 1 - Good for
Designed for automotive, aerospace, defense, and other demanding manufacturing environments, Onyx GF is built for teams that require both material performance and visual organization at scale.
Markforged, COMPOSITE MATERIAL DATASHEETp. 1 - Pitfalls and limitations
The mechanical and thermal properties of Onyx GF may vary with print orientation.
Markforged, COMPOSITE MATERIAL DATASHEETp. 2 - Adhesion between layers
In tension, most parts are strongest when the print orientation and loading direction are parallel, and weakest when the print orientation and loading direction are perpendicular.
Markforged, COMPOSITE MATERIAL DATASHEETp. 2 - Moisture sensitivity
The mechanical properties of Onyx GF may change based on the moisture absorbed from its ambient environment.
Markforged, COMPOSITE MATERIAL DATASHEETp. 2 - Moisture sensitivity
Increased moisture content will result in a more durable part, behavior that is typical of nylon-based materials.
Markforged, COMPOSITE MATERIAL DATASHEETp. 2
No product matches "".
Not published by any product: tensile strength (Z), notched impact, price and heated chamber.
Values are for the colour each sheet tested; pigment can change them.