Nylon-CF, maker-undisclosed polyamide
6 products from 5 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
6 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- converted price
- not published
How the numbers are worked out
Markforged OnyxStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa2.4HDT 0.45, °C145HDT 1.8, °C—Price, CAD/kg—Nozzle, °C—Bed, °C—Drying, °C, h—
Markforged OnyxMarkforged
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Markforged, Composites Material Datasheet10 valuesUnless a row says otherwise: printed specimenprint settingsOnyx column; Composite Base table; plastic test plaques printed with full infill (p. 1); tensile ASTM D638 type I or IV beams, flexural 3-pt bending 4.5 in (L) x 0.4 in (W) x 0.12 in (H) | |||
| Tensile modulus orientation not stated | 2.4 GPap. 1: Tensile Modulus (GPa), Onyx | ASTM D638 | in the median |
| Tensile yield strength orientation not stated | 40 MPap. 1: Tensile Stress at Yield (MPa), Onyx | ASTM D638 | in the median |
| Tensile break strength orientation not stated | 37 MPap. 1: Tensile Stress at Break (MPa), Onyx | ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 25 %p. 1: Tensile Strain at Break (%), Onyx | ASTM D638 | in the median |
| Flexural modulus orientation not stated | 3.0 GPap. 1: Flexural Modulus (GPa), Onyx | ASTM D790 | in the median |
| Flexural strength orientation not stated | 71 MPap. 1: Flexural Strength (MPa) | ASTM D790As the sheet prints it: D790 | in the median |
| Flexural stress at conventional deflection orientation not stated | 71 MPap. 1: Flexural Strength (MPa), Onyx | ASTM D790 | listed under other properties |
| Izod impact strength orientation not stated | 330 J/mp. 1: Izod Impact - notched (J/m), Onyx | ASTM D256As the sheet prints it: ASTM D256-10 A | not in the median: in J/m |
| HDT at 0.45 MPa | 145 °Cp. 1: Heat Deflection Temp (°C), Onyx | ASTM D648As the sheet prints it: Heat-deflection temperature at 0.45 MPa, 66 psi (ASTM D648-07 Method B) | in the median |
| Density | 1.2 g/cm3p. 1: Density (g/cm3), Onyx | no standard stated | |
Print settings
No print settings on file for this product.
What the maker says (1)
- Benefits
Markforged Composite Base materials print like conventional FFF thermoplastics.
Markforged, Composites Material Datasheetp. 2
Stratasys FDM Nylon-CF10Strength XY, MPa—Strength Z, MPa25.4Modulus XY, GPa—HDT 0.45, °C58HDT 1.8, °C52Price, CAD/kg—Nozzle, °CBed, °C—Drying, °C, h—
Stratasys FDM Nylon-CF10Stratasys
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Stratasys, MATERIAL DATA SHEET FDM Nylon-CF1057 valuesUnless a row says otherwise: printed specimenprint settingsTable 4. FDM Nylon-CF10 Mechanical Properties · 0.010 in. Layer Height · ZX Orientation | |||
| Tensile modulus Z (ZX) | 1.57 (0.071) GPap. 6: Tensile Properties: Modulus (Elastic) GPa (ZX), Table 4 | ASTM D638 | in the median |
| Tensile modulus Z (ZX) | 1.73 (0.031) GPap. 7: Tensile Properties: Modulus (Elastic) GPa (ZX), Table 5 | ASTM D638 | not in the median: another value of this product is in it |
| Tensile modulus XZ | 4.15 (0.12) GPap. 6: Tensile Properties: Modulus (Elastic) GPa (XZ), Table 4 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Tensile modulus XZ | 4.20 (0.086) GPap. 7: Tensile Properties: Modulus (Elastic) GPa (XZ), Table 5 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Tensile yield strength Z (ZX) | 25.4 (3.61) MPap. 6: Tensile Properties: Yield Strength MPa (ZX), Table 4 | ASTM D638 | in the median |
| Tensile yield strength Z (ZX) | 35.8 (1.1) MPap. 7: Tensile Properties: Yield Strength MPa (ZX), Table 5 | ASTM D638 | not in the median: another value of this product is in it |
| Tensile yield strength XZ | 69.1 (3.74) MPap. 6: Tensile Properties: Yield Strength MPa (XZ), Table 4 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XZ | 75.2 (2.0) MPap. 7: Tensile Properties: Yield Strength MPa (XZ), Table 5 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Tensile break strength Z (ZX) | 24.7 (3.81) MPap. 6: Tensile Properties: Strength @ Break MPa (ZX), Table 4 | ASTM D638 | not in the median: another value of this product is in it |
| Tensile break strength Z (ZX) | 35.7 (1.1) MPap. 7: Tensile Properties: Strength @ Break MPa (ZX), Table 5 | ASTM D638 | not in the median: another value of this product is in it |
| Tensile break strength XZ | 67.6 (4.12) MPap. 6: Tensile Properties: Strength @ Break MPa (XZ), Table 4 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Tensile break strength XZ | 74.3 (2.1) MPap. 7: Tensile Properties: Strength @ Break MPa (XZ), Table 5 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Elongation at break Z (ZX) | 2.41 (0.62) %p. 6: Tensile Properties: Elongation @ Break % (ZX), Table 4 | ASTM D638 | in the median |
| Elongation at break Z (ZX) | 3.7 (0.33) %p. 7: Tensile Properties: Elongation @ Break % (ZX), Table 5 | ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break XZ | 4.74 (0.73) %p. 6: Tensile Properties: Elongation @ Break % (XZ), Table 4 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Elongation at break XZ | 5.4 (0.59) %p. 7: Tensile Properties: Elongation @ Break % (XZ), Table 5 | ASTM D638 | not in the median: measured on a bar in another orientation |
| Elongation at yield Z (ZX) | 2.52 (0.60) %p. 6: Tensile Properties: Elongation @ Yield % (ZX), Table 4 | ASTM D638 | listed under other properties |
| Elongation at yield Z (ZX) | 3.7 (0.33) %p. 7: Tensile Properties: Elongation @ Yield % (ZX), Table 5 | ASTM D638 | listed under other properties |
| Elongation at yield XZ | 4.44 (0.61) %p. 6: Tensile Properties: Elongation @ Yield % (XZ), Table 4 | ASTM D638 | listed under other properties |
| Elongation at yield XZ | 5.0 (0.29) %p. 7: Tensile Properties: Elongation @ Yield % (XZ), Table 5 | ASTM D638 | listed under other properties |
| Flexural modulus XZ | 5.37 (0.17) GPap. 6: Flexural Properties: Modulus GPa (XZ), Table 4 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 1.54 (0.101) GPap. 6: Flexural Properties: Modulus GPa (ZX), Table 4 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural modulus XZ | 5.24 (0.084) GPap. 7: Flexural Properties: Modulus GPa (XZ), Table 5 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 1.67 (0.039) GPap. 7: Flexural Properties: Modulus GPa (ZX), Table 5 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural strength XZ | 123.7 (2.74) MPap. 6: Flexural Properties: Strength @ Break MPa (XZ), Table 4 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 39.7 (3.49) MPap. 6: Flexural Properties: Strength @ Break MPa (ZX), Table 4 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural strength XZ | 132 (2.1) MPap. 7: Flexural Properties: Strength @ Break MPa (XZ), Table 5 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 57.7 (1.7) MPap. 7: Flexural Properties: Strength @ Break MPa (ZX), Table 5 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | not in the median: measured on a bar in another orientation |
| Flexural elongation at break XZ | 4.61 (0.24) %p. 6: Flexural Properties: Strain @ Break % (XZ), Table 4 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | listed under other properties |
| Flexural elongation at break ZX | 3.16 (0.44) %p. 6: Flexural Properties: Strain @ Break % (ZX), Table 4 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | listed under other properties |
| Flexural elongation at break XZ | 4.7 (0.16) %p. 7: Flexural Properties: Strain @ Break % (XZ), Table 5 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | listed under other properties |
| Flexural elongation at break ZX | 4.6 (0.20) %p. 7: Flexural Properties: Strain @ Break % (ZX), Table 5 | ASTM D790As the sheet prints it: ASTM D790, Procedure A | listed under other properties |
| Izod impact strength XZ | 202.7 (8.6) J/mp. 6: Impact Properties: Notched J/m (XZ), Table 4 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength ZX | 36.4 (13.4) J/mp. 6: Impact Properties: Notched J/m (ZX), Table 4 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength XZ | 1030.5 (74.3) J/mp. 6: Impact Properties: Unnotched J/m (XZ), Table 4 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength ZX | 117.11 (17.1) J/mp. 6: Impact Properties: Unnotched J/m (ZX), Table 4 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength XZ | 187 (7.2) J/mp. 7: Impact Properties: Notched J/m (XZ), Table 5 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength ZX | 41.2 (6.3) J/mp. 7: Impact Properties: Notched J/m (ZX), Table 5 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength XZ | 1030 (73) J/mp. 7: Impact Properties: Unnotched J/m (XZ), Table 5 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength ZX | 145 (15) J/mp. 7: Impact Properties: Unnotched J/m (ZX), Table 5 | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Compression strength XZ | 76.1 (40.0) MPap. 6: Compression Properties: Peak Strength MPa (XZ), Table 4 | ASTM D695 | |
| Compression strength ZX | 124.2 (12.15) MPap. 6: Compression Properties: Peak Strength MPa (ZX), Table 4 | ASTM D695 | |
| Compression strength XZ | 80.6 (2.7) MPap. 7: Compression Properties: Peak Strength MPa (XZ), Table 5 | ASTM D695 | |
| Compression strength ZX | 139 (1.7) MPap. 7: Compression Properties: Peak Strength MPa (ZX), Table 5 | ASTM D695 | |
| HDT XY, at 0.45 MPa | 58 °C (136 °F)p. 4: HDT @ 66 psi, XY | ASTM D648As the sheet prints it: HDT @ 66 psi ASTM D648 Method Bas printedAs printed | in the median |
| HDT XY, at 1.8 MPa | 52 °C (126 °F)p. 4: HDT @ 264 psi, XY | ASTM D648As the sheet prints it: HDT @ 264 psi ASTM D648 Method Bas printedAs printed | in the median |
| HDT orientation not stated, at 0.45 MPa | 77 °C (171 °F)p. 4: HDT @ 66 psi, XZ/ZX | ASTM D648As the sheet prints it: HDT @ 66 psi ASTM D648 Method Bas printedAs printed | not in the median: another value of this product is in it |
| HDT orientation not stated, at 1.8 MPa | 62 °C (144 °F)p. 4: HDT @ 264 psi, XZ/ZX | ASTM D648As the sheet prints it: HDT @ 264 psi ASTM D648 Method Bas printedAs printed | not in the median: another value of this product is in it |
| Glass transition temperature | 109 °C (228.2 °F)p. 4: Tg | ASTM D7426As the sheet prints it: ASTM D7426 Inflection Pointas printedAs printed | in the median |
| Coefficient of thermal expansion | 94 μm/[m*°C] µm/m/Kp. 4: CTE (XY), XY | ASTM E831As the sheet prints it: ASTM E831 (RT to 60 °C)as printedAs printed | |
| Coefficient of thermal expansion | 79 μm/[m*°C] µm/m/Kp. 4: CTE (XY), XZ/ZX | ASTM E831As the sheet prints it: ASTM E831 (RT to 60 °C)as printedAs printed | |
| Coefficient of thermal expansion | 180 μm/[m*°C] µm/m/Kp. 4: CTE (Z), XY | ASTM E831As the sheet prints it: ASTM E831 (RT to 60 °C)as printedAs printed | |
| Coefficient of thermal expansion | 148 μm/[m*°C] µm/m/Kp. 4: CTE (Z), XZ/ZX | ASTM E831As the sheet prints it: ASTM E831 (RT to 60 °C)as printedAs printed | |
| Density | 1.1411 g/cm3p. 4: Specific Gravity | ASTM D792as printedAs printed | |
| Volume resistivity | 1.88E+15 Ohms-cm Ω·cmp. 4: Volume Resistivity, XY | ASTM D257as printedAs printed | |
| Volume resistivity | 4.25E+13 Ohms-cm Ω·cmp. 4: Volume Resistivity, XZ/ZX | ASTM D257as printedAs printed | |
| Fibre content | 10% chopped carbon fiber (by weight)p. 2: Fibre content | specimen not stated, no standard statedprint settings not stated | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- No temperature statedStratasys, MATERIAL DATA SHEET FDM Nylon-CF10p. 3: Product Information: Table 1 and Build Tray
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
FDM Nylon-CF10 is a composite material combining a blended nylon polymer with 10% chopped carbon fiber (by weight), enhancing the material’s strength and rigidity.
Stratasys, MATERIAL DATA SHEET FDM Nylon-CF10p. 2 - Benefits
The nylon base polymer also gives FDM Nylon-CF10 good chemical resistance.
Stratasys, MATERIAL DATA SHEET FDM Nylon-CF10p. 2
Filamatrix Nylon Carbon FiberStrength XY, MPa57.5Strength Z, MPa—Modulus XY, GPa—HDT 0.45, °C147HDT 1.8, °C—Price, CAD/kg—Nozzle, °C255Bed, °C70Drying, °C, h7512 h
Filamatrix Nylon Carbon FiberFilamatrix
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Filamatrix, Nylon Carbon Fiber Technical Data Sheet7 valuesUnless a row says otherwise: printed specimen | |||
| Tensile yield strength XY | 8340 psip. 1: Tensile Strength at Yield/ psi * | ASTM D638As the sheet prints it: ASTM D638, Type IV; infill=100 %; tested in an independent lab | in the median |
| Elongation at break XY | 12 %p. 1: Tensile Elongation/ % * | ASTM D638As the sheet prints it: ASTM D638, Type IV; infill=100 %; tested in an independent lab | in the median |
| Flexural modulus XY | 520 kpsip. 1: Flexural Modulus/ kpsi * | ASTM D790As the sheet prints it: ASTM D790; infill=100 %; tested in an independent lab | in the median |
| Flexural strength XY | 16.0 kpsip. 1: Flexural Peak Stress / kpsi * | ASTM D790As the sheet prints it: ASTM D790; infill=100 %; tested in an independent lab | in the median |
| Izod impact strength XY | 124 J/mp. 1: Notched Izod Impact/ Jm-1 * | ASTM D256As the sheet prints it: ASTM D256; infill=100 %; tested in an independent lab | not in the median: in J/m |
| HDT at 0.45 MPa | 147 °Cp. 1: Heat Deflection Temperature/ °C * | ASTM D648As the sheet prints it: ASTM D648 at 66 psi; infill=100 %; tested in an independent lab | in the median |
| Density | 1.01 g/cm3p. 1: Density (gcm-3) | specimen not stated, ASTM D792 | |
Print settings
- Nozzle
- 255 °Cown data sheet
- Bed
- 70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 75 °C for 12 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Filamatrix, Nylon Carbon Fiber 3D Printer Filament 500g & 1kg - Filamatrix; bed in Filamatrix, Nylon Carbon Fiber 3D Printer Filament 500g & 1kg - Filamatrix.
Its 3 print profiles, in the documents' words
- Nozzle 255 °C; Bed 70 °CFilamatrix, Nylon Carbon Fiber Technical Data Sheetp. 1: Nozzle temperature*; p. 1: Heated bed temperature; p. 1: Bed material; p. 1: Nozzles
- Nozzle 245 - 265 °C; Bed 60 - 80 °C; Drying Recommended drying temperature: 75 °C; For Nylon Carbon Fiber, dry six to twelve hours at 75° C (165° F)Filamatrix, Nylon Carbon Fiber 3D Printer Filament 500g & 1kg - Filamatrixp. 1: Drying; p. 1: Recommended nozzle temperature; p. 1: Recommended bed temperature; p. 1: Tips for optimal printing; p. 1: Tips for optimal printing
- No temperature statedFilamatrix, Which Nylon Filament Is Right for Me? | Filamatrixp. 1: Nylon Carbon Fiber
Markforged Onyx FRStrength XY, MPa41Strength Z, MPa—Modulus XY, GPa3HDT 0.45, °C145HDT 1.8, °C—Price, CAD/kg—Nozzle, °C—Bed, °C—Drying, °C, h—
Markforged Onyx FRMarkforged
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Markforged, Composites Material Datasheet8 valuesUnless a row says otherwise: printed specimenprint settingsOnyx FR column; Composite Base table; plastic test plaques printed with full infill (p. 1); tensile ASTM D638 type I or IV beams, flexural 3-pt bending 4.5 in (L) x 0.4 in (W) x 0.12 in (H) | |||
| Tensile modulus orientation not stated | 3.0 GPap. 1: Tensile Modulus (GPa), Onyx FR | ASTM D638 | in the median |
| Tensile yield strength orientation not stated | 41 MPap. 1: Tensile Stress at Yield (MPa), Onyx FR | ASTM D638 | in the median |
| Tensile break strength orientation not stated | 40 MPap. 1: Tensile Stress at Break (MPa), Onyx FR | ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 18 %p. 1: Tensile Strain at Break (%), Onyx FR | ASTM D638 | in the median |
| Flexural modulus orientation not stated | 3.6 GPap. 1: Flexural Modulus (GPa), Onyx FR | ASTM D790 | in the median |
| Flexural stress at conventional deflection orientation not stated | 71 MPap. 1: Flexural Strength (MPa), Onyx FR | ASTM D790 | listed under other properties |
| HDT at 0.45 MPa | 145 °Cp. 1: Heat Deflection Temp (°C), Onyx FR | ASTM D648As the sheet prints it: Heat-deflection temperature at 0.45 MPa, 66 psi (ASTM D648-07 Method B) | in the median |
| Density | 1.2 g/cm3p. 1: Density (g/cm3), Onyx FR | no standard stated | |
Print settings
No print settings on file for this product.
What the maker says (1)
- Benefits
Markforged Composite Base materials print like conventional FFF thermoplastics.
Markforged, Composites Material Datasheetp. 2
colorFabb PA-CF low warpStrength XY, MPa107Strength Z, MPa—Modulus XY, GPa—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg167Nozzle, °C260–280Bed, °C40–50Drying, °C, h1256 h
colorFabb PA-CF low warpcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet colorFabb PA-CF low warp6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 107 MPap. 1: Tensile Strength MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 2,0 %p. 1: Tensile Elongation@break % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 37 kJ/m2p. 1: Charpy Impact strength, unnotched kJ/m2 | ISO 179 | not in the median: unnotched |
| Continuous service temperature | 120 °Cp. 1: Continuous Service Temp. | no standard namedAs the sheet prints it: UL 746B | |
| Density | 1,4 g/cm3p. 1: Density g/cm3 | ISO 1183 | |
| Water absorption | 2,0 %p. 1: Humidity absorption (23°C,50%RH) % | no standard namedAs the sheet prints it: 23°C 50 RH | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 125 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 260-280 °C; Bed Cold bed (low infill prints); 40 – 50 °C (high infill prints)colorFabb, Technical datasheet colorFabb PA-CF low warpp. 1: Recommended printing settings; p. 1: Bed surface / modification
- Drying 125 °C for 6 h (before printing)colorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing), PA-CF Low Warp row, Temperature [°C] and Duration [h]; both material tables agree on drying only
- Nozzle 260C-280CcolorFabb, PA-CF Low Warp – Carbon Fiber Nylon Filament with Excellent Dimensional Stability | colorFabbp. 1: Advised 3D printing temperature; p. 1: Advised Heated bed
Price
167 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 167 CAD/kgcolorFabb PA-CF Low Warp, 1.75 mm (SKU CF-8719033556218)in its price; 3DJake International (European storefront) lists 72.5 EUR for 0.7 kg: 104 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 4 documents
What the maker says (6)
- Warping and shrinkage
The PA-CF Low Warp is a one of a kind polyamide formulation with the ability to print nearly warp free on non heated buildplatforms. Low infill prints come out perfectly flat on cold bed for higher infill prints 40/50C temperature is enough to obtain flat prints.
colorFabb, PA-CF Low Warp – Carbon Fiber Nylon Filament with Excellent Dimensional Stability | colorFabbp. 1: exact-product Warping and shrinkage paragraph - Printing advice
PA-CF Low Warp 47.7 3530 3.2 2.76 79.4 2920 50 260-280 50 30-40 30-40 0-50 4 125 6
colorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: first table PA-CF Low Warp row; duplicate table; column headers - Warping and shrinkage
ColorFabb PA-CF low warp is a one of a kind polyamide formulation with the ability to print nearly warp free on non-heated buildplatforms.
colorFabb, Technical datasheet colorFabb PA-CF low warpp. 1 - Benefits
PA-CF Low Warp excels in tensile and impact strength and allows continues use at 120°C while retaining sufficient mechanical properties.
colorFabb, Technical datasheet colorFabb PA-CF low warpp. 1 - Nozzle wear
The addition of carbon fibers makes this filament highly abrasive for regular brass nozzle.
colorFabb, Technical datasheet colorFabb PA-CF low warpp. 1 - Nozzle wear
We recommend users to use abrasive resistant nozzles, such as E3D hardened steel nozzles or Olsson Ruby nozzle.
colorFabb, Technical datasheet colorFabb PA-CF low warpp. 1
Sakata 3D PA-CF15Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—HDT 0.45, °C180HDT 1.8, °C—Price, CAD/kg—Nozzle, °C235–260Bed, °C≥ 65Drying, °C, h70≥ 8 h
Sakata 3D PA-CF15Sakata 3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Sakata 3D, PA-CF15 Technical Data Sheet12 values | |||
| Tensile modulus | 9,000 MPap. 1: Tensile modulus | ISO 527drydry as moulded | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 120 MPap. 1: Tensile strength | ISO 527drydry as moulded | not in the median: measured on a moulded bar |
| Elongation at break | 4 %p. 1: Elongation at break | ISO 527drydry as moulded | not in the median: measured on a moulded bar |
| Flexural modulus | 8,000 MPap. 1: Flexural modulus | ISO 178drydry as moulded | not in the median: measured on a moulded bar |
| Flexural strength | 180 MPap. 1: Flexural strength | ISO 178drydry as moulded | not in the median: measured on a moulded bar |
| Charpy impact strength | 60 KJ/m²p. 1: Charpy unnotched impact strength | ISO 179drydry as moulded | not in the median: measured on a moulded bar |
| Charpy impact strength | 4 KJ/m²p. 1: Charpy notched impact strength | ISO 179drydry as moulded | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 180 ºC °Cp. 1: HDT (0.45 MPa) | ISO 75As the sheet prints it: ISO 75; 0.45MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.18 g/cm³p. 1: Density | ISO 1183 | |
| Water absorption | 2.5 %p. 1: Moisture absorption | ISO 62As the sheet prints it: ISO 62; Absorption labelled moisture absorption; no humidity/time published. | |
| Water absorption | 8.0 %p. 1: Water absorption | ISO 62 | |
| Fibre content | 15% carbon fiberp. 1: Product description | no standard stated | |
Print settings
- Nozzle
- 235–260 °Cown data sheet
- Bed
- at least 65 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70 °C for ≥ 8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 235 - 260; Bed > 65; Drying > 8 hours at 70 ºC (drybox)Sakata 3D, PA-CF15 Technical Data Sheetp. 1: Nozzle temp.; p. 1: Type of nozzle; p. 1: Type of bed; PRINT SETTINGS (Bed temp.); PRINT SETTINGS (Dry specification, before printing; Type of printer)
Price
Not in the price sample.
Its 2 documents
No product matches "".
Not published by any product: notched impact and heated chamber.
Values are for the colour each sheet tested; pigment can change them.