TPU 95A class
27 products from 22 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
27 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- from the Bambu Lab Filament Guide
- Izod where no Charpy is published
- shared data sheet
- not published
How the numbers are worked out
Anycubic TPUStrength XY, MPa34.4Strength Z, MPa18.5Modulus XY, GPa0.0502Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C195–230Bed, °C50–60Chamber, °CnoneDrying, °C, h70–808–12 h
Anycubic TPUAnycubic
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Anycubic, Anycubic TPU11 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 50.2 MPap. 1: Young's Modulus / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 34.4 MPap. 1: Tensile Strength / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z | 18.5 MPap. 1: Tensile Strength / MPa (Z) | ISO 527 | in the median |
| Elongation at break XY | 697 %p. 1: Elongation at Break / % (X-Y) | ISO 527 | in the median |
| Flexural modulus XY | 87.6 MPap. 1: Bending Modulus / MPa (X-Y) | ISO 178 | in the median |
| Flexural strength XY | 4.26 MPap. 1: Bending Strength / MPa (X-Y) | ISO 178 | in the median |
| HDT at 0.45 MPa | 52 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃ | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO 75-2 | |
| Melting temperature | 145.1 ℃p. 2: Melting Temperature ISO 11357-1, 10℃/min ℃ | specimen not stated, ISO 11357As the sheet prints it: ISO 11357-1 | |
| Density | 1.23 g/cm3p. 1: Density/(g/cm³) ISO 1183,at 23°C g/cm3 | ISO 1183As the sheet prints it: at 23°C ISO 1183 | |
| Moisture content | 0.38 %p. 1: Moisture Content ISO 787-2 % | ISO 787As the sheet prints it: ISO 787-2 | |
| Melt mass-flow rate | 25 g/10minp. 1: Melt Index/ ( g/10min) ISO 1133 g/10min | specimen not stated, ISO 1133As the sheet prints it: g/10min ISO 1133 | |
Print settings
- Nozzle
- 195–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70–80 °C for 8–12 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 195-230; Bed 50-60; Drying 70℃-80℃,8h-12hAnycubic, Anycubic TPUp. 2: Recommended printing settings; p. 2: Dry Environment; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Recommended Printing Parameters
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
It provides exceptional elasticity and durability, allowing it to bend freely without breaking.
Anycubic, Anycubic TPUp. 1 - Benefits
It is resistant to wear, oil, and aging, ensuring that printed parts maintain their vivid colors and performance over time.
Anycubic, Anycubic TPUp. 1
Bambu Lab TPU 95A HFStrength XY, MPa27.3Strength Z, MPa22.3Modulus XY, GPa0.0098Charpy notched, kJ/m²—Price, CAD/kg54Nozzle, °C220–240Bed, °C30–35Chamber, °C25–45Drying, °C, h708 h
Bambu Lab TPU 95A HFBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HF13 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)annealed at 70 °C for 12 hAll the specimens were annealed and dried at 70 °C for 12 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 230 °C Bed Temperature 35 °C Printing Speed 140 mm/s Infill Density 100% *All the specimens were annealed and dried at 70 °C for 12 h before testing. It's not recommended to anneal prints of TPU, or prints with not very simple shape and structure can deform obviously. When drying the filament and annealing the prin | |||
| Tensile modulus XY | 9.8 ± 0.7 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 7.4 ± 0.6 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 27.3 ± 0.8 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 22.3 ± 0.6 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | > 650 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | > 480 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Charpy impact strength XY | 123.2 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 86.3 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Hardness | 95A Shore AProduct name: TPU 95A HF | specimen not stated, no standard statedmoisture state not statedtreatment not statedprint settings not stated | not in the median: rated by the product's name, not a test |
| Melting temperature | 183 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.22 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 1.08 %p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: te 25 °C, 55% RH | |
| Melt mass-flow rate | 36.5 ± 2.6 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: flexural modulus, flexural modulus, flexural strength, flexural strength, hdt, glass transition temperature, vicat softening temperature, crystallization temperature. | |||
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 30–35 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
- Annealing
- 70 °C for 12 hown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 220 - 240 °C; Bed 30 - 35 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 70 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFRecommended printing settings
- Drying recommended further drying before use and after storageBambu Lab, TPU 95A HF official maker product pagep. 1: Drying Recommendations
Price
54 CAD/kgthe median of its 2 regular prices in the sample
3 listings: 2 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 54 CAD/kgTPU 95A HF - Black (51100) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
- 3D Printing Canada: 54 CAD/kgBlue - Bambu Lab TPU 95A HF Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
- 3D Printing Canada: 54 per kg, sale priceYellow - Bambu Lab TPU 95A HF Filament - 1.75mm, 1kg / Filament with spoolnot used: no regular price per kilogram recorded; seen 10 Sep 2026
Its 3 documents
What the maker says (5)
- Benefits
Compared to regular TPU 95A, TPU 95A HF offers an impressive 3x faster printing speed, effectively addressing the common problem of lengthy prints associated with other TPU filaments.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFp. 1 - Adhesion between layers
TPU 95A HF maintains exceptional interlayer adhesion, impact resistance, flexibility, and cold-temperature resilience, just like traditional TPU filaments.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFp. 1 - Pitfalls and limitations
It's not recommended to anneal prints of TPU, or prints with not very simple shape and structure can deform obviously.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFp. 3 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFp. 3 - Pitfalls and limitations
As this filament contains highly hygroscopic wood fibers, please place any unused filament in a sealed container with desiccant immediately, and dry thoroughly before printing.
Bambu Lab, TPU 95A HF official maker product pagep. 1: exact product features/description/application tips, source text line 139
Specimen preparation (1)
All the specimens were annealed and dried at 70 °C for 12 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFTest specimen preparation
Chemicals and environment (6)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 95A HFFlammability
colorFabb TPU95AStrength XY, MPa17Strength Z, MPa—Modulus XY, GPa0.065Charpy notched, kJ/m²78Price, CAD/kg—Nozzle, °C220–230Bed, °C30–40Chamber, °CnoneDrying, °C, h708 h
colorFabb TPU95AcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet colorFabb TPU95A12 values | |||
| Tensile modulus XY | 65 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Tensile strength (yield or break not stated) XY | 17 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 32 MPap. 1: Tensile Strength ASTM D-412 | ASTM D412 | not in the median: measured on a moulded bar |
| Elongation at break XY | 265 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Elongation at break orientation not stated | 380 %p. 1: Elongation at break ASTM D-412 | ASTM D412 | not in the median: measured on a moulded bar |
| Flexural modulus XY | 54 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Flexural strength XY | 2,9 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Charpy impact strength XY | 78 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | in the median |
| Hardness | 90-95 Shore Ap. 1: Shore Hardness Shore A | no standard stated | in the median |
| Glass transition temperature | -25 °Cp. 1: Glass Transition Temp. DSC, ISO 11357 | ISO 11357 | |
| Melting temperature | 200 °Cp. 1: Melting Temp. DSC, ISO 11357 | ISO 11357 | |
| Density | 1,21 g/cm3p. 1: Specific Gravity ASTM D-2240 | ASTM D2240 | |
Print settings
- Nozzle
- 220–230 °Cown data sheet
- Bed
- 30–40 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220-230 °C; Bed 30-40 °CcolorFabb, Technical datasheet colorFabb TPU95Ap. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Pitfalls and limitations
While ensuring optimal results requires attention to printing settings and bed adhesion, its value proposition remains unmatched.
colorFabb, Technical datasheet colorFabb TPU95Ap. 1
SUNLU TPU 95AStrength XY, MPa31Strength Z, MPa—Modulus XY, GPa0.0502Charpy notched, kJ/m²47IzodPrice, CAD/kg—Nozzle, °C190–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50–60
SUNLU TPU 95ASUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information TPU9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 50.2 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) orientation not stated | 21.7 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 536 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 87.6 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 4.26 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 52 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | |
| Decomposition temperature | 300 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.23 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 20-30 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| SUNLU, 产品资料 Version1.0 2024-6 TPU7 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 50.2 MPap. 1: 杨氏模量(X-Y)Young’s Modulus | ISO 527As the sheet prints it: ISO527/2; rate=1mm/min | in the median |
| Tensile strength (yield or break not stated) XY | 34.4 MPap. 1: 拉伸强度（X-Y）Tensile Strength | ISO 527As the sheet prints it: ISO527/2; rate=50mm/min | not in the median: another value of this product is in it |
| Elongation at break XY | 1063 %p. 1: 断裂伸长率(X-Y) Elongation at break | ISO 527As the sheet prints it: ISO527/2; rate=50mm/min | not in the median: another value of this product is in it |
| Flexural modulus XY | 87.6 MPap. 1: 弯曲模量 (X-Y) Flexural Modulus | ISO 178As the sheet prints it: ISO178; rate=2mm/min | in the median |
| Flexural strength XY | 4.26 MPap. 1: 弯曲强度 (X-Y) Flexural Strength | ISO 178As the sheet prints it: ISO178; rate=2mm/min | in the median |
| HDT XY, at 0.45 MPa | 52 ℃physically implausiblep. 1: 热变形温度（X-Y）Heat Deflection (HDT) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO75; 0.45MPa | |
| Melt mass-flow rate | 23.5 g/10minp. 1: 熔体指数 Melt Flow Rate | specimen not stated, ISO 1133As the sheet prints it: ISO1133; 2.16kg | |
| SUNLU, TECHNICAL DATA SHEET ISO TPU 95A7 valuesThe same values also in SUNLU, SUNLU TPU 95A.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 31 ± 3 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 900 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 47 ± 5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 38 ± 5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 95 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| Density | 1.21 g/cm3p. 1: Density ISO 1183 23℃ g/cm3also in SUNLU, SUNLU TPU 95A | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 28 ± 3 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 minalso in SUNLU, SUNLU TPU 95A | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| SUNLU, SUNLU TPU 95A3 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 31±3 MPap. 1: Tensile Strength(MPa) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | >900 %p. 1: Elongation at Break(%) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength orientation not stated | 47±5 kJ/m²p. 1: Notched Izod Impact Strength(kJ/m²) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °Cown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in SUNLU, SUNLU TPU 95A.
Its 5 print profiles, in the documents' words
- Nozzle 190-210; 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50-60℃SUNLU, TECHNICAL DATA SHEET ISO TPU 95Ap. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 195-205℃; Bed 50-60℃; Chamber Room Temperature; Drying 70-80℃SUNLU, Product Information TPUp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Room Temp.; p. 2: Print Platform Material
- Nozzle 210-230℃; Bed 50-60℃; Chamber Room Temperature; Drying 70-80℃SUNLU, Product Information TPUp. 2: Recommended Printing Parameters: Zonal Temperature, 80- 150mm/s; p. 2: Print Platform Material
- Nozzle 190-210℃/50-80mm/s; Bed 50-60℃SUNLU, SUNLU TPU 95Ap. 1: Nozzle Temperature & Print Speed; p. 1: Bed Temperature
- Nozzle 190-210 ℃ / 50-80 mm/s; Bed 50-60℃; Chamber 室温; Drying 50℃SUNLU, 产品资料 Version1.0 2024-6 TPUp. 2: 喷嘴打印温度 Nozzle Print Temp.; p. 2: 打印平台温度 Print Platform Temp.; p. 2: 打印平台材料 Print Platform Material; p. 2: 环境温度 Room Temp.; p. 2: 烘干温度 Drying Temp.
Price
Not in the price sample.
Its 5 documents
What the maker says (4)
- Benefits
Has good flexibility and a rubber-like texture
SUNLU, TECHNICAL DATA SHEET ISO TPU 95Ap. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO TPU 95Ap. 2 - Benefits
Good flexibility with rubber-like texture.
SUNLU, Product Information TPUp. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information TPUp. 2
NinjaTek CheetahStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa0.0262Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–240Bed, °C30–45Chamber, °CnoneDrying, °C, h708 h
NinjaTek CheetahNinjaTek
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| NinjaTek, Technical Specifications Cheetah™ 3D Printing Filament12 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 3,800 psip. 1: Tensile Modulus ASTM D638 | ASTM D638 | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 5,650 psip. 1: Tensile Strength, Ultimate ASTM D638 | ASTM D638 | in the median |
| Tensile yield strength orientation not stated | 1,250 psip. 1: Tensile Strength, Yield ASTM D638 | ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 580 %p. 1: Elongation at Break ASTM D638 | ASTM D638 | in the median |
| Elongation at yield orientation not stated | 55 %p. 1: Elongation at Yield ASTM D638 | ASTM D638 | listed under other properties |
| Izod impact strength | 19.1 kJ/m2p. 1: Impact Strength (notched Izod, 23C) ASTM D256 9.1 ft.lbf/in2 | ASTM D256As the sheet prints it: Izod 23C 9.1 ft.lbf/in2 ASTM D256 | not in the median: to another standard |
| Hardness | 95 Shore Ap. 1: Hardness ASTM D2240 | ASTM D2240 | in the median |
| HDT at 0.45 MPa | 49° C °Cphysically implausiblep. 1: Heat Deflection Temperature (HDT) @ 66psi/ 0.45 MPa | ASTM D648As the sheet prints it: ASTM D648; 0.45 MPa | |
| Glass transition temperature | -24° C °Cp. 1: Glass Transition (Tg) | specimen not stated, DSC | |
| Melting temperature | 220° C °Cp. 1: Melting Point (via Differential Scanning Calorimeter) | specimen not stated, DSC | |
| Density | 1.22 g/ccp. 1: Specific Gravity ASTM D792 | specimen not stated, ASTM D792 | |
| Water absorption | 0.18 %p. 1: Moisture Absorption - 24 hours ASTM D570 | specimen not stated, ASTM D570As the sheet prints it: 24 hours ASTM D570 | |
Print settings
- Nozzle
- 220–240 °CBambu Lab Filament Guide
- Bed
- 30–45 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Price
Not in the price sample.
Its document
What the maker says (1)
- Benefits
The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market.
NinjaTek, Technical Specifications Cheetah™ 3D Printing Filamentp. 1
iSANMATE TPUStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa0.026Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–240Bed, °C30Chamber, °C0–50Drying, °C, h708 h
iSANMATE TPUiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, TPU12 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 26 MPap. 1: Tensile Modulus | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 8.6 MPap. 1: Tensile Stress at Yield | printed specimen (implied by the document), ASTM D638 | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 39 MPap. 1: Tensile Stress at Break | printed specimen (implied by the document), ASTM D638 | in the median |
| Elongation at break orientation not stated | 580 %p. 1: Elongation at Break | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 55 %p. 1: Elongation at Yield | ASTM D638 | listed under other properties |
| Izod impact strength orientation not stated | 19.1 kJ/m2p. 1: Izod Impact Strength, notched (at23 C) | printed specimen (implied by the document), ASTM D256tested at 23 °C | not in the median: to another standard |
| Hardness | 95 (Shore A)p. 1: Hardness | ASTM D2240 | in the median |
| HDT at 0.45 MPa | 74 °Cphysically implausiblep. 1: Heat Deflection (HDT) | ASTM D648As the sheet prints it: ASTM D648, 0.455 MPa load | |
| HDT at 1.8 MPa | 49 °Cphysically implausiblep. 1: Heat Deflection (HDT) | ASTM D648As the sheet prints it: ASTM D648, 1.82 MPa load | |
| Glass transition temperature | -24 C °Cp. 1: Glass Transition | DSC | |
| Density | 1.22 Specific gravityp. 2: Specific Gravity | ASTM D782 | |
| Water absorption | 0.18 %p. 2: Moisture Absorption | ASTM D570As the sheet prints it: ASTM D570 (24h) | |
| Also named without a value: flexural modulus, flexural strength, charpy impact strength, izod impact strength. | |||
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 30 °Cown data sheet
- Heated chamber
- 0–50 °Cown data sheet
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220 -240 ºC; Bed 30 -500 ºC; Chamber 0-50 °CiSANMATE, TPURecommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
It is commonly applied in field such as functional prototypes, guides, sleeves, and protective cases.
iSANMATE, TPUp. 1 - Benefits
It also has good corrosion resistance to industrials oils and chemicals.
iSANMATE, TPUp. 1 - Adhesion between layers
It is a semi-flexible and chemical resistance filament with strong interlayer bonding.
iSANMATE, TPUp. 1
MatterHackers TPUStrength XY, MPa17.2Strength Z, MPa—Modulus XY, GPa0.0227Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–240Bed, °C60–80Chamber, °CnoneDrying, °C, h90
MatterHackers TPUMatterHackers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - PRO Series TPU8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 22.75 MPap. 1: Tensile Modulus | ASTM D412 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 17.2 MPap. 1: Tensile Strength | printed specimen (implied by the document), ASTM D412 | in the median |
| Elongation at break orientation not stated | 550 %p. 1: Tensile Elongation | ASTM D412 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 37.2 MPap. 1: Flexural Modulus | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 95 Shore Ap. 1: Hardness | ASTM D2240 | in the median |
| Vicat softening temperature | 115°Cp. 2: Vicant Softening Point | ASTM D1525 | |
| Density | 1.14 g/cm3p. 2: Density | ASTM D792 | |
| Melt volume-flow rate | 20 cm3/10 minp. 1: Melt Flow Index | ISO 1133tested at 200°C | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 90 °Cown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 230°C ±10°C; Bed 70°C ±10°C; Drying 90°C (Active Drying Recommended)MatterHackers, TECHNICAL DATA SHEET - PRO Series TPUp. 2: Recommended printing settings; p. 2: Material Drying Temperature; p. 2: Build Surface Material
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
For 3D printed parts that need rubber-like qualities, like custom-fit gaskets or belts, or even prototypes for products like mouth guards and watch straps, PRO Series TPU is a functional material that can handle both intricate and tough print jobs.
MatterHackers, TECHNICAL DATA SHEET - PRO Series TPUp. 1 - Adhesion between layers
MatterHackers PRO Series TPU 3D printing filament exhibits excellent layer adhesion and strength while being flexible, making it a great solution for parts that require energy return and fatigue resistance.
MatterHackers, TECHNICAL DATA SHEET - PRO Series TPUp. 1 - Moisture sensitivity
Material Drying Temperature 90°C (Active Drying Recommended)
MatterHackers, TECHNICAL DATA SHEET - PRO Series TPUp. 2
Eryone Hyper Speed TPUStrength XY, MPa27.3Strength Z, MPa22Modulus XY, GPa0.027Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–220Bed, °C0–60Chamber, °CnoneDrying, °C, h708 h
Eryone Hyper Speed TPUEryone
Data sheet shared with Eryone Standard TPU: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Eryone, Technical Data Sheet (TDS) Hyper Speed TPU7 valuesThe same values also in Eryone, Technical Data Sheet (TDS) Standard TPU.Unless a row says otherwise: printed specimenprint settingsprinting temperature=220 ° C, printing speed=100mm/s, base plate 55° C, filling=100%, nozzle diameter=0.4mm | |||
| Tensile modulus XY | 27 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile strength (yield or break not stated) XY | 27.3 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 22 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPaalso in Eryone, Technical Data Sheet (TDS) Standard TPU | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843 | in the median |
| Elongation at break XY | 501.3 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Impact strength, test unclear | 120 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843 | listed under other properties |
| Density | 1.22 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 36 g/10minp. 1: Melt Index(g/10 min) 210 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 210 ° C 2.16 kg | |
| Eryone, Technical Data Sheet (TDS) Standard TPU2 values | |||
| Charpy impact strength orientation not stated | 120 kJ/m2p. 2: Charpy Impact strenght | GB/T 1843As the sheet prints it: GB/T 1843; energy=2.75J | not in the median: notch not stated |
| HDT at 0.45 MPa | 70 ℃physically implausiblep. 1: Heat distortion temperature(° C) | ASTM D648As the sheet prints it: ASTM D648; 0.45MPa | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200-220 ℃; Bed 0-60℃; Drying 70℃, 8HEryone, Technical Data Sheet (TDS) Hyper Speed TPUp. 1: Recommended printing settings; p. 1: Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Good for
It is ideal for use in mobile phone cases and other electronic device protective covers.
Eryone, Technical Data Sheet (TDS) Hyper Speed TPUp. 1 - Benefits
ERYONE high-speed TPU filament is a highly efficient printing material, boasting a printing speed approximately three times that of conventional TPU, significantly improving printing efficiency.
Eryone, Technical Data Sheet (TDS) Hyper Speed TPUp. 1 - Benefits
This material is not only soft yet highly tough and wear-resistant, but also boasts excellent impact resistance for shock absorption and maintains its performance despite repeated bending.
Eryone, Technical Data Sheet (TDS) Hyper Speed TPUp. 1 - Printing advice
Proper drying of the material and increased retraction distance are required to minimize stringing.
Eryone, Technical Data Sheet (TDS) Hyper Speed TPUp. 1
Eryone Standard TPUStrength XY, MPa27.3Strength Z, MPa22Modulus XY, GPa0.027Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–220Bed, °C0–60Chamber, °CnoneDrying, °C, h658 h
Eryone Standard TPUEryone
Data sheet shared with Eryone Hyper Speed TPU: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200-220 ℃; Bed 0-60℃; Drying 65℃, 8HEryone, Technical Data Sheet (TDS) Standard TPUp. 1: Nozzle temperature, Bed temperature, Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
It is an ideal choice for phone cases and other electronic device protective covers.
Eryone, Technical Data Sheet (TDS) Standard TPUp. 1 - Benefits
ERYONE Standard TPU material is not only soft but also extremely tough and abrasion-resistant, while also possessing excellent impact resistance, effectively absorbing impact force and maintaining performance even after repeated bending.
Eryone, Technical Data Sheet (TDS) Standard TPUp. 1 - Printing advice
To reduce stringing, the material needs to be properly dried and the retraction distance increased.
Eryone, Technical Data Sheet (TDS) Standard TPUp. 1
Essentium TPU 95A-ZStrength XY, MPa34Strength Z, MPa7Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C230–250Bed, °C50–80Chamber, °CnoneDrying, °C, h708 h
Essentium TPU 95A-ZEssentium
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Z7 values | |||
| Tensile strength (yield or break not stated) XY | 34 MPap. 1: Tensile Strength, MPa (XY) | ASTM D638 | in the median |
| Tensile strength (yield or break not stated) Z (ZX) | 7 MPap. 1: Tensile Strength, MPa (ZX) | ASTM D638 | in the median |
| Elongation at break XY | 639 %p. 1: Elongation at Break, % (XY) | ASTM D638 | in the median |
| Elongation at break Z (ZX) | 48 %p. 1: Elongation at Break, % (ZX) | ASTM D638 | in the median |
| Hardness | 95A Shore Ap. 1: Shore Hardness | ISO 868 | in the median |
| Tear strength orientation not stated | 100 kN/mp. 1: Tear Strength, kN/m | ISO 34As the sheet prints it: ISO 34-1 | |
| Abrasion loss | 25 mm3p. 1: Abrasion Loss, mm3 | ISO 4649 | |
Print settings
- Nozzle
- 230–250 °Cown data sheet
- Bed
- 50–80 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 230 – 250; Bed 50 – 80Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Zp. 1: Nozzle Temperature, ºC; p. 1: Bed Temperature, ºC; p. 1: Bed Material; p. 2: Nozzle Size, mm
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Benefits
With non-marring surface properties, you don’t have to worry about latent failures in electronics.
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Zp. 1 - Benefits
This filament has a low friction surface that allows for easier feeding while printing.
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Zp. 1 - Good for
Electronics manufacturing ESD safe jigs and fixtures
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Zp. 2 - Good for
Flexible hose and ducting
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Zp. 2 - Benefits
Excellent chemical, solvent, oil and ozone resistance
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Zp. 2 - Benefits
Excellent abrasion, tear and wear resistance
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 95A-Zp. 2
Flashforge TPU95AStrength XY, MPa27Strength Z, MPa—Modulus XY, GPa0.006Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–240Bed, °C25–60Chamber, °C25–40Drying, °C, h70≥ 5 h
Flashforge TPU95AFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet TPU95A Filament9 values | |||
| Tensile modulus XY | 6-7 Mpap. 1: Modulus of Elasticity(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Adventurer 5M (Flashforge); Nozzle Diameter 0.6mm; Nozzle Temperature 230 °C; Printing Speed 150mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 27-28 Mpap. 1: Tensile Strength(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Adventurer 5M (Flashforge); Nozzle Diameter 0.6mm; Nozzle Temperature 230 °C; Printing Speed 150mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 800-1000 %p. 1: Elongation at Break(X-Y) ISO 527 % | ISO 527print settingsTest Equipment Adventurer 5M (Flashforge); Nozzle Diameter 0.6mm; Nozzle Temperature 230 °C; Printing Speed 150mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 7-9 Mpap. 1: Bending Strength(X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Adventurer 5M (Flashforge); Nozzle Diameter 0.6mm; Nozzle Temperature 230 °C; Printing Speed 150mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| HDT at 0.45 MPa | 95 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | |
| Continuous service temperature | 90 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.2-1.25 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 0.5 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 6-10 g/10minp. 1: Melt Flow Rate (MFR) (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 200–240 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- 70 °C for ≥ 5 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200~240℃ (230℃ recommended); Bed Room temperature~60℃ (40℃ recommended); Chamber Room temperature~40℃; Drying dry the filament in a hot dry air oven at 70℃ for at least 5 hours before useFlashforge, Technical Data Sheet TPU95A Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
It features excellent resilience, flexibility, dimensional stability and good flowability, and does not warp or crack, with the ability to be printable on various FFF 3D printers.
Flashforge, Technical Data Sheet TPU95A Filamentp. 1 - Benefits
Resilience/Dimensional stability/High flowability
Flashforge, Technical Data Sheet TPU95A Filamentp. 1 - Supports and removal
Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet TPU95A Filamentp. 2 - Moisture sensitivity
If issues like bubbles or severe stringing occur during printing TPU, please dry the filament in a hot dry air oven at 70℃ for at least 5 hours before use.
Flashforge, Technical Data Sheet TPU95A Filamentp. 3
Polymaker PolyFlex TPU95Strength XY, MPa29Strength Z, MPa—Modulus XY, GPa0.029Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–230Bed, °C25–60Chamber, °C25–45Drying, °C, h708 h
Polymaker PolyFlex TPU95Polymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, PolyFlex™ TPU95 Technical Data Sheet9 valuesThe same values also in Polymaker, PolyFlex TPU95 and Polymaker, Nov. 2018 Technical Data Sheet Version 4.0 PolyFlex™ TPU95.Unless a row says otherwise: printed specimenprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | |||
| Tensile strength (yield or break not stated) XY | held back: the sheet's unit or table layout is unclearheld backp. 1: Tensile strain (X-Y) | ISO 37, GB/T 528 | not in the median: held back |
| Elongation at break XY | held back: the sheet's unit or table layout is unclearheld backp. 1: Elongation at break (X-Y) | ISO 37, GB/T 528 | not in the median: held back |
| Tensile stress at 100 % elongation XY | 11.1 ± 0.3 MPap. 1: Stress at 100% strain (X-Y) | ISO 37, GB/T 528 | |
| Tensile stress at 200 % elongation XY | 15.0 ± 0.6 MPap. 1: Stress at 200% strain (X-Y) | ISO 37, GB/T 528 | |
| Tensile stress at 300 % elongation XY | 21.0 ± 0.7 MPap. 1: Stress at 300% strain (X-Y) | ISO 37, GB/T 528 | |
| Tensile stress at 400 % elongation XY | 25.8 ± 0.4 MPap. 1: Stress at 400% strain (X-Y) | ISO 37, GB/T 528 | |
| Density | 1.20 g/cm3p. 1: Density ISO1183, GB/T1033 | specimen not stated, ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.82 %p. 1: Equilibrium water absorption (%)=also in Polymaker, PolyFlex TPU95 | specimen not stated, no standard statedprint settings not stated | |
| Melt mass-flow rate | 3-6 g/10minp. 1: Melt index 185°C, 1.2 kgalso in Polymaker, Nov. 2018 Technical Data Sheet Version 4.0 PolyFlex™ TPU95 | specimen not stated, no standard namedAs the sheet prints it: 185°C 1.2 kg | |
| Polymaker, Nov. 2018 Technical Data Sheet Version 4.0 PolyFlex™ TPU955 valuesThe same values also in Polymaker, PolyFlex TPU95 and Polymaker, PolyFlex™ TPU95 Technical Data Sheet.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 29.0 ± 2.8 MPap. 1: Tensile strength (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsnozzle temperature = 225 °C, printing speed = 30 mm/s, build plate temperature = 30 °C, infill = 100% | in the median |
| Elongation at break XY | 330.1 ± 14.9 %p. 1: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsnozzle temperature = 225 °C, printing speed = 30 mm/s, build plate temperature = 30 °C, infill = 100% | not in the median: another value of this product is in it |
| Hardness | 95 Shore Ap. 1: Shore hardness ASTM D2240 (ISO 7619, GB/T 31) ~also in Polymaker, PolyFlex TPU95also in Polymaker, PolyFlex™ TPU95 Technical Data Sheet | ASTM D2240, ISO 7619, GB/T 31As the sheet prints it: 2240 ~ ASTM D2240 ISO 7619 GB/T 31 | in the median |
| Tensile stress at 100 % elongation XY | 9.4 ± 0.3 (MPa)p. 1: 100% modulus (X-Y) | ASTM D638, ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsnozzle temperature = 225 °C, printing speed = 30 mm/s, build plate temperature = 30 °C, infill = 100% | |
| Density | 1.20-1.24 g/cm3p. 1: Density ASTM D792 (ISO 1183, GB/T 1033)also in Polymaker, PolyFlex TPU95 | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: 792 ASTM D792 ISO 1183 GB/T 1033 | |
Polymaker, PolyFlex TPU952 valuesUnless a row says otherwise: printed specimenmoistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 225 °C Bed temperature 30 °C Shell 2 Top & bottom layer 4 Infill 100% Environmental temperature 25 °C Cooling fan ON The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes | |||
| Tensile modulus XY | 29 ± 2.8 MPap. 3: Young’s modulus (X-Y) | ISO 37, GB/T 528 | in the median |
| Elongation at break XY | 330.1 ± 14 %p. 3: Elongation at break (X-Y) | ISO 37, GB/T 528 | in the median |
| Polymaker, PolyFlex™ TPU952 values | |||
| Elongation at break XY | 551.2 %p. 1: Elongation at break | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Density | 1.22 g/cm³p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): drying in Polymaker, PolyFlex™ TPU95.
Its 4 print profiles, in the documents' words
- Nozzle 210 - 230 (℃); Bed 25 - 60 (˚C); Chamber Room temperaturePolymaker, PolyFlex TPU95Recommended printing settings; p. 3: Based on 0.4 mm nozzle
- Nozzle 210 - 230 (˚C); Bed 25 - 60 (˚C); Chamber Room temperature - 45 (˚C)Polymaker, Nov. 2018 Technical Data Sheet Version 4.0 PolyFlex™ TPU95p. 1: Recommended printing settings: Nozzle temperature; p. 1: Build Surface material; p. 1: Based on 0.4 mm nozzle
- Nozzle 210-230°C; Bed 25-60°C; Drying 70°C/8HPolymaker, PolyFlex™ TPU95 Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
- Nozzle 210˚C - 230˚C; Bed 25˚C - 60˚C; Drying 65˚C for 8h (Only if the material has absorbed moisture)Polymaker, PolyFlex™ TPU95p. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings
Price
Not in the price sample.
Its 5 documents
What the maker says (2)
- Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, Nov. 2018 Technical Data Sheet Version 4.0 PolyFlex™ TPU95p. 1 - Pitfalls and limitations
Will be very difficult to print with a small nozzle diameter..
Polymaker, PolyFlex™ TPU95p. 1
Chemicals and environment (8)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, PolyFlex TPU95Effect of weak acids - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, PolyFlex TPU95Effect of strong acids - Alkali resistance: not resistant
Not resistant
Effect of weak alkalis · weakPolymaker, PolyFlex TPU95Effect of weak alkalis - Alkali resistance: not resistant
Not resistant
Effect of strong alkalis · strongPolymaker, PolyFlex TPU95Effect of strong alkalis - Organic solvent resistance: no data
No data available
Effect of organic solventPolymaker, PolyFlex TPU95Effect of organic solvent - Oil and grease resistance: no data
No data available
Effect of oils and greasePolymaker, PolyFlex TPU95Effect of oils and grease - Acid resistance: limited
Fair
Effect of weak acids · weakPolymaker, PolyFlex™ TPU95 Technical Data Sheetp. 1: Effect of weak acids Fair - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, PolyFlex™ TPU95 Technical Data Sheetp. 1: Effect of strong acids Poor
Raise3D Premium TPU-95AStrength XY, MPa23.1Strength Z, MPa—Modulus XY, GPa0.0132Charpy notched, kJ/m²—Price, CAD/kg112Nozzle, °C200–220Bed, °C25–50Chamber, °CnoneDrying, °C, h70≥ 10 h
Raise3D Premium TPU-95ARaise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Raise3D, Raise3D Premium TPU-95A Technical Data Sheet6 values | |||
| Tensile modulus XY | 13.2 ± 0.3 MPap. 1: Young’s modulus (X - Y) ISO 37, GB/T 528 | ISO 37, GB/T 528 | in the median |
| Tensile strength (yield or break not stated) XY | 23.1 ± 0.6 MPap. 1: Tensile strength (X - Y) ISO 37, GB/T 528 | ISO 37, GB/T 528 | in the median |
| Elongation at break orientation not stated | 462 ± 21 %p. 1: Elongation at break ISO 37, GB/T 528 | ISO 37, GB/T 528 | in the median |
| Hardness | 95 Shore Ap. 1: Shore Hardness ISO 7619-1, GB/T 531.1 | ISO 7619, GB/T 531.1As the sheet prints it: ISO 7619-1 GB/T 531.1 | in the median |
| Density | 1.20-1.24 g/cm³p. 1: Density ISO 1183, GB/T 1033 | ISO 1183, GB/T 1033 | |
| Melt mass-flow rate | 9.3 g/10minp. 1: Melt index 185 °C, 1.2 kg | no standard namedAs the sheet prints it: 185 °C 1.2 kg | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 25–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 70 °C for ≥ 10 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 - 220 (°C); Bed 25 - 50 (°C); Chamber Room temperature; Drying Dry the filament at 70°C for over 10h before printingRaise3D, Raise3D Premium TPU-95A Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Notes; p. 2: Note
Price
112 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- Shop3D.ca: 115 CAD/kgRaise3D Premium TPU-95A Filament - 1.75mm (1kg) / Natural (SKU [S]5.11.19162A01)in its price; seen 30 Sep 2026
- DigitMakers: 109 CAD/kgRaise3D Premium TPU-95A Filament 1.75mm 1kg Spool / White (SKU RAISE3D-FL-TPU-1.75-1KG-WHT)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (5)
- Good for
Its rubber-like elasticity, resilience, and durability make it suitable for uses requiring impact-absorption and a soft-touch surface.
Raise3D, Raise3D Premium TPU-95A Technical Data Sheetp. 1 - Good for
TPU-95A printed parts are widely used in applications such as insoles, tubes, seals, and bushings.
Raise3D, Raise3D Premium TPU-95A Technical Data Sheetp. 1 - Moisture sensitivity
Filaments may absorb higher levels of moisture during printing, a filament drying box is recommended.
Raise3D, Raise3D Premium TPU-95A Technical Data Sheetp. 1 - Moisture sensitivity
Dry the filament at 70°C for over 10h before printing, especially for Hyper FFF TM L1 high speed printing profiles.
Raise3D, Raise3D Premium TPU-95A Technical Data Sheetp. 1 - Odour and emissions
Odor / Almost odorless
Raise3D, Raise3D Premium TPU-95A Technical Data Sheetp. 1
SIDDAMENT TPU 95AStrength XY, MPa34.4Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h
SIDDAMENT TPU 95ASIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, TPU 95A - Technical Datasheet7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 34.4 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 1063 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 87.6 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 4.26 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 60 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | |
| Density | 1.09 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.4 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2–4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-240°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, TPU 95A - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, TPU 95A - Technical Datasheetp. 2
Polymaker PolyFlex TPU95 HFStrength XY, MPa26.6Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–230Bed, °C25–50Chamber, °CnoneDrying, °C, h708 h
Polymaker PolyFlex TPU95 HFPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, PolyFlex™ TPU95-HF Technical Data Sheet9 valuesThe same values also in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HF. | |||
| Tensile strength (yield or break not stated) XY | 26.6 ± 0.6 MPap. 1: Tensile strength (X-Y) ISO 37, GB/T 528 | ISO 37, GB/T 528print settingsPrinting temperature 220°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Elongation at break XY | 495.8 ± 16.2 %p. 1: Elongation at break (X-Y) ISO 37, GB/T 528 | ISO 37, GB/T 528print settingsPrinting temperature 220°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Hardness Z | 95 Shore Ap. 1: Shore hardness (Z) ISO 7619-1, GB/T 531.1 | ISO 7619, GB/T 531.1As the sheet prints it: ISO 7619-1 GB/T 531.1 | not in the median: measured on a bar in another orientation |
| Tensile stress at 100 % elongation XY | 15.5 ± 0.7 MPap. 1: Mechanical Properties, Stress at 100% strain (X-Y) | ISO 37, GB/T 528print settingsPrinting temperature 220°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | |
| Tensile stress at 200 % elongation XY | 19.9 ± 0.8 MPap. 1: Mechanical Properties, Stress at 200% strain (X-Y) | ISO 37, GB/T 528print settingsPrinting temperature 220°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | |
| Tensile stress at 300 % elongation XY | 23.0 ± 0.5 MPap. 1: Mechanical Properties, Stress at 300% strain (X-Y) | ISO 37, GB/T 528print settingsPrinting temperature 220°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | |
| Density | 1.16 g/cm3p. 1: Density ISO1183, GB/T1033also in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HF | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.69 %p. 1: Equilibrium water absorption (%)= | no standard stated | |
| Melt mass-flow rate | 9.3 g/10minp. 1: Melt index 210°C, 2.16kgalso in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HF | no standard namedAs the sheet prints it: 210°C 2.16kg | |
Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HF4 valuesUnless a row says otherwise: printed specimenmoistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsnozzle temperature = 210 °C, printing speed = 45 mm/s, build plate temperature = 50 °C, infill = 100% | |||
| Tensile strength (yield or break not stated) XY | 23.11 ± 0.63 MPap. 1: Tensile strength (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break XY | 462.3 ± 21.1 %p. 1: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Hardness | 95 Shore Ap. 1: Shore hardness ASTM D2240 (ISO 7619, GB/T 31) | ASTM D2240, ISO 7619, GB/T 31As the sheet prints it: 2240 ASTM D2240 ISO 7619 GB/T 31 | in the median |
| Tensile stress at 100 % elongation XY | 13.24 ± 0.29 (MPa)p. 1: 100% modulus (X-Y) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040) | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 25–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HF, Polymaker, Polymaker PolyFlex TPU95 HF official product page; heated chamber in Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HF; drying in Polymaker, Polymaker PolyFlex TPU95 HF official product page.
Its 3 print profiles, in the documents' words
- Nozzle 200 - 220 (˚C); Bed 25 - 50 (˚C); Chamber Room temperature - 45 (˚C)Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HFp. 1: Recommended printing settings: Nozzle temperature; p. 1: Recommended environmental temperature; p. 1: Build Surface material; p. 1: Footnote to printing conditions
- Nozzle 200-230°C; Bed 25-50°C; Drying 70°C/8HPolymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
- Nozzle 200˚C - 220˚C; Bed 25˚C - 50˚C; Drying 70˚C for 8h (Only if the material has absorbed moisture)Polymaker, Polymaker PolyFlex TPU95 HF official product pagep. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings; p. 1: Enclosure
Price
Not in the price sample.
Its 4 documents
What the maker says (7)
- Benefits
PolyFlex™ TPU95-HF, created from Covestro’s Addigy® family, is a TPU with high flow properties making it ideal for high speed printing.
Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HFp. 1 - Benefits
Combined with its UV resistance, PolyFlex™ TPU95-HF unlocks new applications for flexible materials in manufacturing.
Polymaker, Sep. 2020 Technical Data Sheet Version 4.2 PolyFlex™ TPU95-HFp. 1 - Benefits
PolyFlex™ TPU95-HF, created from Covestro’s Addigy® family, is a TPU with high flow properties making it ideal for high-speed printing.
Polymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1 - Benefits
Combined with its UV resistance, PolyFlex™ TPU95-HF unlocks new applications for flexible materials in manufacturing.
Polymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1 - Good for
Ideal for Fast, Flexible Parts Choose PolyFlex™ TPU95-HF when you need to combine flexibility with high-speed production - perfect for rapid prototyping, manufacturing jigs, and functional, elastic components.
Polymaker, Polymaker PolyFlex TPU95 HF official product pagep. 1: Description, intended uses - Printing advice
PolyFlex™ TPU95-HF can be printed on an indirect drive printer however we highly recommend to use a direct drive printer to print PolyFlex™ TPU95-HF at its high speed settings. A direct drive printer is a printer with the extruder mounted on top of the hot end.
Polymaker, Polymaker PolyFlex TPU95 HF official product pagep. 1: FAQ, extruder - Pitfalls and limitations
Drying 50°C for 6h
Polymaker, Polymaker PolyFlex TPU95 HF official product pagep. 1: Technical summary, drying
Chemicals and environment (5)
- Acid resistance: limited
Fair
Effect of weak acids · weakPolymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1: Effect of weak acids Fair - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1: Effect of strong acids Poor - Alkali resistance: limited
Fair
Effect of weak alkalis · weakPolymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis - Alkali resistance: not resistant
Poor
Effect of strong alkalis · strongPolymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis - Oil and grease resistance: resistant
Good
Effect of oils and greasePolymaker, PolyFlex™ TPU95-HF Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease
Prusa Research Prusament TPU 95A by Prusa PolymersStrength XY, MPa41.4Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–240Bed, °C55–75Chamber, °CnoneDrying, °C, h708 h
Prusa Research Prusament TPU 95A by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament TPU 95A by Prusa Polymers18 values | |||
| Tensile strength (yield or break not stated) XY | 41.4 ± 1.3 MPap. 2: Tensile Strength [MPa] | ISO 37 | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 64 ± 3 MPap. 2: Tensile Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Hardness | 92 ± 0.4 Shore Ap. 2: Hardness – Shore A | no standard stated | in the median |
| Hardness | 39 ± 0.7 Shore Dp. 2: Hardness - Shore D | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 9.5 ± 0.2 MPap. 2: Interlayer Adhesion [MPa] | ISO 527 | |
| Compression set XY | 33.5 ± 0.1 %p. 2: Compression Set under Constant Deflection at 23 °C [%] | ISO 815As the sheet prints it: ISO 815-1 | |
| Compression set XY | 42.2 ± 1.9 %p. 2: Compression Set under Constant Deflection at 40 °C [%] | ISO 815As the sheet prints it: ISO 815-1 | |
| Compression set XY | 59.7 ± 2.3 %p. 2: Compression Set under Constant Deflection at 55 °C [%] | ISO 815As the sheet prints it: ISO 815-1 | |
| Compression set XY | 70.4 ± 0.7 %p. 2: Compression Set under Constant Deflection at 70 °C [%] | ISO 815As the sheet prints it: ISO 815-1 | |
| Compression set XY | 82.7 ± 2.7 %p. 2: Compression Set under Constant Deflection at 85 °C [%] | ISO 815As the sheet prints it: ISO 815-1 | |
| Tensile stress at 100 % elongation XY | 8.9 ± 0.2 MPap. 2: Modulus at 100 % Elongation [MPa] | ISO 37 | |
| Tensile stress at 200 % elongation XY | 14.7 ± 0.2 MPap. 2: Modulus at 200 % Elongation [MPa] | ISO 37 | |
| Tensile stress at 300 % elongation XY | 21.3 ± 0.4 MPap. 2: Modulus at 300 % Elongation [MPa] | ISO 37 | |
| HDT at 1.8 MPa | 78.6 °Cphysically implausiblep. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | |
| Vicat softening temperature | 101.6 °Cp. 2: Vicat A [°C] | ISO 306As the sheet prints it: ISO 306; method=A | |
| Density | 1.25 g/cm3p. 2: Density [g/cm3] | ISO 1183 | |
| Water absorption | 0.02 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=20 % | |
| Water absorption | 0.04 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=7 days; humidity=20 % | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 55–75 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle [°C] 230 ± 10; Bed [°C] 65 ± 10Prusa Research, Technical datasheet Prusament TPU 95A by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Printing advice
The brim is necessary for very small or very large objects.
Prusa Research, Technical datasheet Prusament TPU 95A by Prusa Polymersp. 1
Siraya Tech Flex TPU 95AStrength XY, MPa32Strength Z, MPa—Modulus XY, GPa0.02Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–230Bed, °C20–50Chamber, °CnoneDrying, °C, h50–654–6 h
Siraya Tech Flex TPU 95ASiraya Tech
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printing10 values | |||
| Tensile modulus orientation not stated | 20 MPap. 1: Young’s Modulus (MPa) | ASTM D638 | in the median |
| Tensile break strength XY | 32 ± 3.0 MPap. 1: Tensile Stress at Break (MPa) | ISO 527 | in the median |
| Izod impact strength | 19.5 kJ/m2p. 1: IZOD Impact (Notched 72F) kJ/m2 | ASTM D256As the sheet prints it: 72F D256 | not in the median: to another standard |
| Hardness | 95 Shore Ap. 1: Shore Hardness | ISO 7619 | in the median |
| Tensile stress at 100 % elongation XY | 9.8 MPap. 1: Tensile stress at 100% | no standard namedAs the sheet prints it: 100% | |
| Tensile stress at 200 % elongation XY | 12.5 MPap. 1: Tensile stress at 200% | no standard namedAs the sheet prints it: 200% | |
| Tensile stress at 300 % elongation XY | 17 MPap. 1: Tensile stress at 300% | no standard namedAs the sheet prints it: 300% | |
| Vicat softening temperature | 99 ℃p. 1: Vicat softening temperature ℃ | ISO 306 | |
| Melting temperature | 200 ℃p. 1: Melting Point (℃) | no standard stated | |
| Density | 1.16 g/cm³p. 1: Filament Density g/cm³ | ISO 1183 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 20–50 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50–65 °C for 4–6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200-230°C; Bed 20°C and 50°C; Drying dry the filament at 50°C - 65°C for 4-6 hoursSiraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1: Recommended printing settings; p. 1: Drying note; p. 1: Recommended Nozzle Diameter; p. 1: Build Platform Material
Price
Not in the price sample.
Its 2 documents
What the maker says (10)
- Good for
Footwear and Protective Gear : Perfect for crafting durable shoe components and protective cases or pads.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Good for
Automotive and Medical Devices : Ideal for flexible automotive interiors and customized medical equipment.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Good for
Robotics : Suitable for producing flexible, tough parts essential in robotic mechanisms.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Warping and shrinkage
Sometimes, enclosing the printer can help maintain a consistent temperature, reducing warping.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Moisture sensitivity
(Filament dryer is not recommended because heating cannot maintain a uniform temperature throughout the dryer)
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Moisture sensitivity
For extended storage, use a dry box with desiccant to maintain humidity below 15%.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Moisture sensitivity
Ensure the filament is dry, as moisture can contribute to stringing.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Printing advice
Printer Compatibility : Use FDM printers with direct drive extruders for better filament control.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Printing advice
Mount the filament spool directly above the extruder to minimize the path to the extruder, enhancing print quality.
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1 - Printing advice
Adjust Extruder Tension: Make sure the extruder tension is correctly set for flexible materials, which often require different tension settings
Siraya Tech, Siraya Tech Flex TPU 95A Filament - Durable, Flexible, High-Speed printingp. 1
FormFutura ReForm rTPU 95AStrength XY, MPa32Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C60–80Chamber, °CnoneDrying, °C, h50–7024 h
FormFutura ReForm rTPU 95AFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95A5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 32 MPap. 1: Tensile strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 355 %p. 1: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 95 Shore Ap. 1: Shore A hardness | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Melting temperature | 165 °Cp. 1: Melting Point | no standard stated | |
| Density | 1,21 g/cm3p. 1: Specific Gravity (23°C) | ISO 1183As the sheet prints it: 23°C ISO 1183-1 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–70 °C for 24 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle ± 220 - 250°C; Bed ± 60 - 80°C; Drying 24 hours @ ~50-70 °CFormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1: Recommended printing settings; p. 1: Drying; p. 1: Nozzle; p. 1: Buildplate adhesion
Price
Not in the price sample.
Its 2 documents
What the maker says (12)
- Good for
Automotive applications – Dust covers, bellows, flexible mounts, cable management components.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Good for
ReForm rTPU 95A is perfect for applications where you want tough, durable, abrasion-resistant parts that can still flex a little but won’t collapse under load.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Good for
ReForm rTPU 95A is ideal for producing functional and load-bearing parts that require resistance to wear, tear, abrasion and friction.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Good for
Gears and drive belts – parts can withstand wear while maintaining slight flexibility.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Good for
Housings, connectors, cable grommets – printed parts resist mechanical stress but provide some give.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Good for
Jigs and fixtures – parts that need to bend slightly but remain dimensionally stable.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Good for
Sports & lifestyle equipment – wheels, grips, protective gear that need abrasion resistance.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Benefits
Made with nearly 100% recycled TPU from certified and traceable European sources.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Benefits
This recycled TPU filament is a perfect balance between rubbery and rigid plastics.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Benefits
High abrasion resistance - very resistant to wear, scuffing, and repeated friction.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Benefits
Strong Mechanical Properties - high tear strength and impact resistance
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1 - Benefits
Printed parts can withstand repeated mechanical stress without cracking.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 95Ap. 1
Recreus RECIFLEXStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–235Bed, °C50–60Chamber, °CnoneDrying, °C, h708 h
Recreus RECIFLEXRecreus
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET RECIFLEX4 valuesThe same values also in Recreus, TECHNICAL DATA SHEET RECIFLEX.Unless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 40-50 MPap. 1: Tensile strengthalso in Recreus, TECHNICAL DATA SHEET RECIFLEX | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 400 %p. 1: Elongation at breakalso in Recreus, TECHNICAL DATA SHEET RECIFLEX | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 92-98 Shore Ap. 1: Hardnessalso in Recreus, TECHNICAL DATA SHEET RECIFLEX | DIN 53505, ISO 868 | in the median |
| Density | 1.00-1.22 g/cm3p. 1: Material densityalso in Recreus, TECHNICAL DATA SHEET RECIFLEX | ISO 1183 | |
Print settings
- Nozzle
- 220–235 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 220-235°C; Bed 50-60ºCRecreus, TECHNICAL DATA SHEET RECIFLEXp. 1: Recommended printing settings; p. 1: bed temperature
- Nozzle 220-235°C; Bed 50-60ºCRecreus, TECHNICAL DATA SHEET RECIFLEXp. 1: Recommended printing settings; p. 1: bed temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Printing advice
Reduce the pressure of the lever arm that presses the filament onto the motor pulley to avoid clogging the filament and causing blockages.
Recreus, TECHNICAL DATA SHEET RECIFLEXp. 1 - Benefits
Reciflex is a Thermoplastic Polyurethane elastomer made from 100% recycled sources that allow extreme printability in FDM printers.
Recreus, TECHNICAL DATA SHEET RECIFLEXp. 1
Chemicals and environment (1)
- Hydrolytic stability: described in words
Reciflex has a remarkable hydrolysis resistance and good stability towards solvents.
Hydrolysis / dimensional stabilityRecreus, TECHNICAL DATA SHEET RECIFLEXp. 1
Spectrum THE FILAMENT TPU 95AStrength XY, MPa32Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–80Chamber, °CnoneDrying, °C, h708 h
Spectrum THE FILAMENT TPU 95ASpectrum
Data sheet shared with The Filament TPU 95A: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 95A5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 32 N/mm2p. 1: Tensile Strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 350 %p. 1: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 95A Shore Ap. 1: Shore hardness A | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Abrasion loss | 30 mm3p. 1: Abrasion Resistance | ISO 4649 | |
| Density | 1.21 g/cm3p. 1: Specific Gravity | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 210-240°C; Bed 40-80°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 95Ap. 1: Recommended printing settings; p. 1: * settings are based on a 0,4 mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
up to 350% elongation at break, Shore 95A, high tensile & tear resistance
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 95Ap. 1 - Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 95Ap. 1 - Moisture sensitivity
Dry box recommended
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 95Ap. 1
The Filament TPU 95AStrength XY, MPa32Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–80Chamber, °CnoneDrying, °C, h708 h
The Filament TPU 95AThe Filament
Data sheet shared with Spectrum THE FILAMENT TPU 95A: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 210-240°C; Bed 40-80°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 95Ap. 1: Recommended printing settings; p. 1: Adhesive; p. 1: settings are based on a 0.4 mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 95Ap. 1
QIDI TPU95A-HFStrength XY, MPa31.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–230Bed, °C20–50Chamber, °CnoneDrying, °C, h70–804–6 h
QIDI TPU95A-HFQIDI
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| QIDI, Technical Data Sheet QIDI TPU95A-HF8 valuesUnless a row says otherwise: printed specimen | |||
| Tensile break strength XY | 31.81 ± 3.26 MPap. 2: 拉伸断裂强度 (X-Y) Tensile breaking strength (X-Y) | no standard stated | in the median |
| Elongation at break XY | 471 ± 81 %p. 2: elongation at break (X-Y) | no standard stated | in the median |
| Tensile stress at 100 % elongation XY | 9.75±0.16 MPap. 2: tensile stress at 100% (X-Y) | ISO 527 | |
| Tensile stress at 200 % elongation XY | 12.2±0.27 MPap. 2: tensile stress at 200% (X-Y) | ISO 527 | |
| Tensile stress at 300 % elongation XY | 17.0±0.49 MPap. 2: tensile stress at 300% (X-Y) | ISO 527 | |
| Vicat softening temperature | 99 °Cp. 2: Melt index 维卡软温度 ISO 306 Vicat softening temperature | ISO 306 | |
| Density | 1.15 g/cm³p. 2: 密度 ISO 1183 Density | ISO 1183 | |
| Melt mass-flow rate | 30 g/10minp. 2: Melt index | specimen not stated, no standard stated | |
| QIDI, QIDI Filament Guide | Choose the Right Filament1 value | |||
| Water absorption | 1.62%p. 1: Saturated Water Absorption Rate | no standard statedafter moisture conditioningsaturation | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 20–50 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 70–80 °C for 4–6 hown data sheet
- Hardened nozzle
- not neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in QIDI, QIDI Filament Guide | Choose the Right Filament; drying in QIDI, QIDI Filament Guide | Choose the Right Filament.
Its 2 print profiles, in the documents' words
- Nozzle 210-230°C; Bed 20-50°C; Drying After the material is damp, there will be more printing ozzing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 70-80℃ for 4-6h to restore the printing quality of QIDI TPU95A-HF.QIDI, Technical Data Sheet QIDI TPU95A-HFp. 4: Drying note; p. 3: Nozzle temperature; p. 3: Build plate temperature; p. 3: Recommended nozzle diameter; p. 3: Recommended build surface
- Nozzle 210-230°C; Bed Textured PEI plate (35-50°C) / Smooth PEI plate with release glue (35-50°C); Drying Required; Blast Drying Oven: 70-80°C / 4-6 hQIDI, QIDI Filament Guide | Choose the Right Filamentp. 1: Is drying highly recommended?; p. 1: Recommended hardware settings; p. 1: Bed Temperature & Type; p. 1: Extruder heat range
Price
Not in the price sample.
Its 3 documents
What the maker says (10)
- Benefits
QIDI TPU95A-HF is TPU material that is easy to print.
QIDI, Technical Data Sheet QIDI TPU95A-HFp. 1 - Benefits
When a suitable extruder is selected, QIDI TPU95A-HF can support a printing speed of more than 100mm/s.
QIDI, Technical Data Sheet QIDI TPU95A-HFp. 1 - Benefits
QIDI improved the fluidity of TPU material, so that the material can be easily pushed in the extruder with only a small thrust.
QIDI, Technical Data Sheet QIDI TPU95A-HFp. 1 - Printing advice
High speed printing (≥100mm/s) can be easily realized by direct extruders, and conventional speed printing (30-60mm / s) can be realized by bowden extruders.
QIDI, Technical Data Sheet QIDI TPU95A-HFp. 1 - Moisture sensitivity
TPU material is very easy to absorb moisture when exposed to air, and printing after absorbing moisture will result ozzing, extruding with bubbles and rough surface appearance, thus reducing print quality.
QIDI, Technical Data Sheet QIDI TPU95A-HFp. 3 - Moisture sensitivity
It is recommended that put the filament into a dry box (humidity below 15%)
QIDI, Technical Data Sheet QIDI TPU95A-HFp. 3 - Printing advice
If you want to achieve high-speed printing, it is recommended to use direct extruders, such as BMG extruder, Titan extruder and Hemera extruder, and appropriately increase the nozzle temperature.
QIDI, Technical Data Sheet QIDI TPU95A-HFp. 3 - Moisture sensitivity
Blast Drying Oven: 70-80°C / 4-6 h
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1 - Nozzle wear
0.2-0.8 mm / All Material
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1 - Printing advice
Not recommended
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1
Recreus 95AStrength XY, MPa33Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C245Bed, °C50–55Chamber, °CnoneDrying, °C, h55≥ 1 h
Recreus 95ARecreus
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET FILAFLEX 95A7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 33 MPap. 2: Tensile strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 95 Shore Ap. 2: Hardness (Shore A, 3 s) | ISO 7619As the sheet prints it: Shore A 3 s ISO 7619-1 | in the median |
| Abrasion loss orientation not stated | 35 mm³p. 2: Abrasion resistance | ISO 4649 | |
| Compression set orientation not stated | 20 %p. 2: Compression set (23 °C / 72 h) | ISO 815As the sheet prints it: 23 °C / 72 h ISO 815 | |
| Tensile stress at 100 % elongation orientation not stated | 11 MPap. 2: Stress at 100% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Tensile stress at 300 % elongation orientation not stated | 18 MPap. 2: Stress at 300% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Density | 1240 kg/m³p. 2: Material density | ISO 1183 | |
Print settings
- Nozzle
- 245 °Cown data sheet
- Bed
- 50–55 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 55 °C for ≥ 1 hown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 245 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 2: Recommended printing settings; p. 2: Nozzle 0.4 mm
- Nozzle 248 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 3: Recommended printing settings: Nozzle 0.8 mm
- Nozzle 250 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 3: Recommended printing settings: Nozzle 1.0 mm
Price
Not in the price sample.
Its 2 documents
What the maker says (11)
- Good for
Medical & Orthopedic: Custom insoles and prosthetic components
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Good for
Fashion & Accessories: Textile printing, bags, and wearable items
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Good for
Footwear Production: Soles, custom shoes, and sandals
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Benefits
Chemical Resistance: Resistant to fuels and solvents
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Benefits
Filaflex 95A TPU (Medium-Flex) is the most user-friendly flexible filament in the Filaflex range, making it the ideal starting point for flexible 3D printing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Benefits
Designed for universal compatibility, Filaflex 95A works seamlessly with all types of 3D printers, including Bowden and direct-drive extrusion systems.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Benefits
It delivers excellent bed adhesion without the need for a heated bed or adhesives, and is odorless, non-toxic, skin-safe, and resistant to fuels and solvents, ensuring consistent performance in both prototyping and end-use applications.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Odour and emissions
Material Safety: Odorless, non-toxic, and skin-safe formulation
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 1 - Moisture sensitivity
Drying is crucial for optimal results
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 2 - Printing advice
Print multiple small parts simultaneously for better results.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 4 - Printing advice
Use maximum travel speed to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95Ap. 4
3DJake TPU A95Strength XY, MPa55Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–230Bed, °C60–90Chamber, °CnoneDrying, °C, h708 h
3DJake TPU A953DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE TPU A958 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 55 MPap. 1: Tensile strength | specimen not stated; its document points to a moulded or resin bar, ASTM D412 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 400 %p. 1: Ultimate Elongation | specimen not stated; its document points to a moulded or resin bar, ASTM D412 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 23500 kg / cm²physically implausiblep. 1: Flexural modulus | ASTM D790 | not in the median: physically implausible as published |
| Vicat softening temperature | 95 °Cp. 1: VICAT A | ISO 306 | |
| Melting temperature | 190 °Cp. 1: Melting temperature | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1,20 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 15 g/10 minp. 1: MFR | ISO 1133 | |
| Mould shrinkage orientation not stated | 0,5 %p. 1: Shrinking | ISO 294As the sheet prints it: ISO 294-4 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 60–90 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 – 230 °C; Bed If you have a heated bed the recommended temperature is ± 60-90˚C3DJake, Technical Data Sheet 3DJAKE TPU A95p. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE TPU A95 can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE TPU A95p. 1
MatterHackers Build Series TPUStrength XY, MPa52Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C20–60Chamber, °CnoneDrying, °C, h708 h
MatterHackers Build Series TPUMatterHackers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - Build Series TPU2 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 52 MPap. 1: Tensile Strength at Yield | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 500 %p. 1: Tensile Elongation at break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)1 value | |||
| Density | 1.12 (g/cm³)p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 70 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg); bed in MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg).
Its 2 print profiles, in the documents' words
- Nozzle 210-240c; Bed 20-60cMatterHackers, TECHNICAL DATA SHEET - Build Series TPUp. 1: Recommended printing settings; p. 1: Suggested printing bed material
- Nozzle 240±10 °C; Bed 50±10 °CMatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1: Technical Specifications: Printer Settings
Price
Not in the price sample.
Its 3 documents
What the maker says (11)
- Good for
Great for items that require resistance to wear and tear
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Good for
MH Build Series Black TPU is an affordable TPU filament intended for producing flexible and strong 3D-printed parts.
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Benefits
Strong, flexible, and easy to print
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Good for
Create end-use, functional parts affordably in product-ready colors
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Printing advice
Don't let the stigma that TPU is hard to print fool you - it's actually really easy, and most 3D printers can handle it right from the box.
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Benefits
Create tough, flexible parts easily
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Good for
Great for projects that require high impact resistance
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Good for
Great for creating parts for robotics, drones, and other mechanical parts
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Good for
TPU is often used in applications that require elasticity or rubber-like textures.
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Good for
Often used for projects like phone cases or shoes
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1 - Benefits
TPU filament can withstand friction without wearing down or breaking
MatterHackers, MatterHackers Black MH Build Series TPU Flexible Filament - 1.75mm (1kg)p. 1
eSUN TPU 95AStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C45–60Chamber, °CnoneDrying, °C, h55≥ 4 h
eSUN TPU 95AeSUN
Data sheet shared with eSUN TPU HS: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, eTPU-95A Technical Data Sheet3 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 35 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 800 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Density | 1.21 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 55 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220 - 250℃; Bed 45-60°C; Drying dry the printing (55℃/>4H)eSUN, eTPU-95A Technical Data Sheetp. 2: Recommended printing settings; p. 2: Drying note; p. 2: Based on
Price
Not in the price sample.
Its 2 documents
What the maker says (10)
- Good for
high hardness and good resilience, can be used for insoles and other applications.
eSUN, eTPU-95A Technical Data Sheetp. 1 - Good for
Shoe material • Conveying pipeline • Medical prosthesis
eSUN, eTPU-95A Technical Data Sheetp. 1 - Benefits
Flexible and soft • High toughness
eSUN, eTPU-95A Technical Data Sheetp. 1 - Benefits
It has good flexibility with a hardness of 95A, easy to print, and can quickly print large, complex and accurate prototypes of elastomer parts
eSUN, eTPU-95A Technical Data Sheetp. 1 - Benefits
good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability
eSUN, eTPU-95A Technical Data Sheetp. 1 - Pitfalls and limitations
The nozzle may have impurities after printing for a long time.
eSUN, eTPU-95A Technical Data Sheetp. 2 - Moisture sensitivity
It is recommended to use it with eBOX cartridges when printing.
eSUN, eTPU-95A Technical Data Sheetp. 2 - Printing advice
It is recommended to use it with the cleaning filament.
eSUN, eTPU-95A Technical Data Sheetp. 2 - Printing advice
It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, eTPU-95A materials are usually difficult to print on a remote extrusion machine.
eSUN, eTPU-95A Technical Data Sheetp. 2 - Printing advice
The remote extruder can try to print at a slower speed at 20mm/s or even slower.
eSUN, eTPU-95A Technical Data Sheetp. 2
eSUN TPU HSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C45–60Chamber, °CnoneDrying, °C, h55≥ 4 h
eSUN TPU HSeSUN
Data sheet shared with eSUN TPU 95A: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 55 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220 - 250℃; Bed 45-60°C; Drying 55℃/>4HeSUN, TPU-HS Technical Data Sheetp. 2: Extruder Temperature, Build Platform Temperature; p. 2: Based on
Price
Not in the price sample.
Its 2 documents
What the maker says (8)
- Good for
high hardness and good resilience, can be used for insoles and other applications.
eSUN, TPU-HS Technical Data Sheetp. 1 - Benefits
It has good flexibility with a hardness of 95A, easy to print, and can quickly print large, complex and ac curate prototypes of elastomer parts
eSUN, TPU-HS Technical Data Sheetp. 1 - Benefits
good flexibility, high tear resistance and wear resistance and cut res is tance, sturdiness and durabi lity
eSUN, TPU-HS Technical Data Sheetp. 1 - Pitfalls and limitations
The nozzle may have impurities after printing for a long time.
eSUN, TPU-HS Technical Data Sheetp. 2 - Moisture sensitivity
It is recommended to use it with eBOX cartridges when printing.
eSUN, TPU-HS Technical Data Sheetp. 2 - Printing advice
It is recommended to use it with the cleaning filament.
eSUN, TPU-HS Technical Data Sheetp. 2 - Printing advice
It is recommended to use a short-range two-wheel reduction extrude r designed for flexibility, TPU-HS materials are usually difficult to print on a remote extrusion machine.
eSUN, TPU-HS Technical Data Sheetp. 2 - Printing advice
The remot e extrude r can try to print at a slower speed at 20mm/s or even slower.
eSUN, TPU-HS Technical Data Sheetp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.