TPU 85A class and softer
18 products from 12 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
18 products
Key
- set apart: test bar not described as printed, or no stated load
- shared data sheet
- not published
How the numbers are worked out
Bambu Lab TPU 85AStrength XY, MPa12Strength Z, MPa10.5Modulus XY, GPa0.0068Charpy notched, kJ/m²—Price, CAD/kg58Nozzle, °C200–250Bed, °C30–35Chamber, °C25–45Drying, °C, h708 h
Bambu Lab TPU 85ABambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85A13 valuesUnless a row says otherwise: printed specimendryAll the specimens were dried at 70 °C for 12 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 225 °C Bed Temperature 35 °C Printing Speed 34 mm/s InfillDensity 100% * All the specimens were printed at the following settings: Nozzle Temperature = 225 °C, Printing Speed = 34 mm/s, Bed Temperature = 35 °C, InfillDensity= 100%. All the specimens were dried at 70 °C for 12 h before testing. It'snot recommended t | |||
| Tensile modulus XY | 6.8 ±0.7 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 5.2 ±0.6 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 12.0 ± 0.8 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 10.5 ± 0.6 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | > 700 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | > 350 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Charpy impact strength XY | 124.3 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 88.5 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Hardness | 85A Shore AProduct name: TPU 85A | specimen not stated, no standard statedmoisture state not statedprint settings not stated | not in the median: rated by the product's name, not a test |
| Melting temperature | 177 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.18 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.67 %p. 2: Saturated Water | no standard namedAs the sheet prints it: 25 °C, 55% RH | |
| Melt mass-flow rate | 8.76 ± 2.6 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: flexural modulus, hdt, glass transition temperature, vicat softening temperature, crystallization temperature. | |||
Print settings
- Nozzle
- 200–250 °Cown data sheet
- Bed
- 30–35 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 -250 °C; Bed 30 -35 °C; Chamber 25 -45 °C; Drying Blast Drying Oven: 70 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - TPU 85ARecommended printing settings
Price
58 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 58 per kg, sale priceTPU 85A / TPU 90A - TPU 85A / Light Cyan (51500) / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- DigitMakers: 58 CAD/kgBambu Lab TPU 85A / TPU 90A Filament 1.75mm - 1kg (Various Colors) / 85A Black (51107) (SKU U04-K0-1.75-1000-SPL)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (4)
- Good for
Perfect for impact-absorbing parts such as protective cases, squishy fidget toys, and soft cushioning elements.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85Ap. 1 - Benefits
The softest in Bambu’s lineup, offering exceptional flexibility and resilience.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85Ap. 1 - Pitfalls and limitations
It's not recommended to anneal prints of TPU, or prints with not very simple shape and structure can deform obviously.
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85Ap. 3 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85Ap. 3
Chemicals and environment (6)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85AFlammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85ASolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85AResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85AResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85AResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - TPU 85AResistance to Oil and Grease
colorFabb TPU85AStrength XY, MPa30Strength Z, MPa—Modulus XY, GPa0.025Charpy notched, kJ/m²15.3Price, CAD/kg—Nozzle, °C220–230Bed, °C30–40Chamber, °C—Drying, °C, h804 h
colorFabb TPU85AcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet colorFabb TPU85A10 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 25 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Tensile strength (yield or break not stated) XY | 30 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 50 MPap. 1: Tensile Strength DIN 53504-S2 | moulded bar (resin supplier's value), DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a moulded bar |
| Elongation at break XY | 560 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Elongation at break orientation not stated | 600 %p. 1: Elongation at break DIN 53504-S2 | moulded bar (resin supplier's value), DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a moulded bar |
| Flexural modulus XY | 23 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | in the median |
| Flexural strength XY | 1,55 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0,2mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 40˚C bed temperature. | not in the median: the only value of its test, shown as published |
| Charpy impact strength XY | 15,3 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | not in the median: the only value of its test, shown as published |
| Hardness | 80-85 Shore Ap. 1: Shore Hardness Shore A | no standard stated | in the median |
| Density | 1,19 g/cm3p. 1: Specific Gravity ASTM D-2240 | moulded bar (resin supplier's value), ASTM D2240 | |
Print settings
- Nozzle
- 220–230 °Cown data sheet
- Bed
- 30–40 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 220-230 °C; Bed 30-40 °CcolorFabb, Technical datasheet colorFabb TPU85Ap. 2: Recommended printing settings
- Drying 80 °C, 4 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Good for
this filament offers unparalleled softness and flexibility, ideal for wearables, cushioning components, and ergonomic designs.
colorFabb, Technical datasheet colorFabb TPU85Ap. 1 - Pitfalls and limitations
While TPU 85A presents printing challenges due to its softer nature, careful adjustment of print settings and ensuring dry filament conditions are crucial for success.
colorFabb, Technical datasheet colorFabb TPU85Ap. 1
NinjaTek NinjaFlexStrength XY, MPa25.5Strength Z, MPa—Modulus XY, GPa0.0124Charpy notched, kJ/m²—Price, CAD/kg158Nozzle, °C225–250Bed, °C25–50Chamber, °C—Drying, °C, h—
NinjaTek NinjaFlexNinjaTek
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| NinjaTek, Technical Specifications NinjaFlex® 3D Printing Filament12 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 1,800 psip. 1: Tensile Modulus ASTM D638 | ASTM D638 | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 3,700 psip. 1: Tensile Strength, Ultimate ASTM D638 | ASTM D638 | in the median |
| Tensile yield strength orientation not stated | 580 psip. 1: Tensile Strength, Yield ASTM D638 | ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 660 %p. 1: Elongation at Break ASTM D638 | ASTM D638 | in the median |
| Elongation at yield orientation not stated | 65 %p. 1: Elongation at Yield ASTM D638 | ASTM D638 | listed under other properties |
| Izod impact strength | 4.2 kJ/m2p. 1: Impact Strength (notched Izod, 23C) ASTM D256 2.0 ft.lbf/in2 | ASTM D256As the sheet prints it: Izod 23C 2.0 ft.lbf/in2 ASTM D256 | not in the median: to another standard |
| Hardness | 85 Shore Ap. 1: Hardness ASTM D2240 | ASTM D2240 | in the median |
| HDT at 0.45 MPa | 44° C °Cphysically implausiblep. 1: Heat Deflection Temperature (HDT) @ 66psi/ 0.45 MPa | ASTM D648As the sheet prints it: ASTM D648; 0.45 MPa | |
| Glass transition temperature | -35° C °Cp. 1: Glass Transition (Tg) | specimen not stated, DSC | |
| Melting temperature | 216° C °Cp. 1: Melting Point (via Differential Scanning Calorimeter) | specimen not stated, DSC | |
| Density | 1.19 g/ccp. 1: Specific Gravity ASTM D792 | specimen not stated, ASTM D792 | |
| Water absorption | 0.22 %p. 1: Moisture Absorption - 24 hours ASTM D570 | specimen not stated, ASTM D570As the sheet prints it: 24 hours ASTM D570 | |
Print settings
- Nozzle
- 225–250 °Cown data sheet
- Bed
- 25–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 225°C – 250°C; Bed Room temperature to 50°CNinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1: Print Guidelines
Price
158 CAD/kgthe median of its 3 regular prices in the sample
3 listings
- MakerWiz: 158 CAD/kgNinjaTek NinjaFlex Fire 1.75mm 500g / Red (SKU 25303011)in its price; seen 30 Sep 2026
- DigitMakers: 140 CAD/kgNinjatek Ninjaflex TPU 85A - 1.75 mm, 0.5kg / Snow White (SKU NINJA-NINJAFLEX-TPU-SNWHITE-3DNF0017505)in its price; seen 30 Sep 2026
- 3D Printing Canada: 164 CAD/kgGrass Green - NinjaTek NinjaFlex TPU 85A - 1.75mm, 0.5 kg (SKU 0662345233682)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (17)
- Benefits
Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology contains a low-tack, easy-to-feed texture.
NinjaTek, Technical Specifications NinjaFlex® 3D Printing Filamentp. 1 - Printing advice
The result is uniquely flexible, strong prints ideal for direct-drive extruders.
NinjaTek, Technical Specifications NinjaFlex® 3D Printing Filamentp. 1 - Benefits
Truly flexible (no fill or layer manipulation required to achieve performance)
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Benefits
660% elongation allows for repeated movement and impact without wear or cracking
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Benefits
Polyurethane composition allows for excellent vibration reduction
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Benefits
Proprietary low-friction exterior allows for smooth feeding
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Benefits
Abrasion resistance 20% better than ABS and 68% better than PLA
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Precision and tolerance
Consistent diameter and material properties providing reliable, high-quality prints
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Good for
From sneaker insoles to helmet inserts, NinjaFlex can protect athletes with its vibration dampening properties.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Good for
NinjaFlex is strong and flexible for applications like prosthetics and realistic organ prototypes.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Good for
Test your new designs with a 3D-printed prototype or quickly create end-use parts for your equipment.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Good for
When printed in various patterns NinjaFlex can provide a unique level of flex to fit your needs.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Good for
The flexibility and low durometer of NinjaFlex lends itself well to movement of soft robotics.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Good for
Wheels printed from NinjaFlex filament enable a smooth ride for the animal while providing durability to withstand various terrains.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Printing advice
Glue is suggested on bed.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Printing advice
As the first flexible material on the market, NinjaFlex ® TPU filament has proprietary technology that boasts a low-tack, easy-to-feed texture ideal for direct-drive extruders.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1 - Benefits
The material has abrasion and chemical resistance and results in consistent printed parts.
NinjaTek, NinjaFlex 3D Printer Filament (85A)p. 1
Recreus 82AStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa0.022Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C240Bed, °C45–50Chamber, °C—Drying, °C, h55≥ 1 h
Recreus 82ARecreus
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET FILAFLEX 82A11 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 22 MPap. 2: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 2: Tensile strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 650 %p. 2: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 85 Shore Ap. 2: Hardness (Shore A, 3 s) | ISO 7619As the sheet prints it: Shore A 3 s ISO 7619-1 | in the median |
| Abrasion loss orientation not stated | 25 mm³p. 2: Abrasion resistance | ISO 4649 | |
| Compression set orientation not stated | 25 %p. 2: Compression set (23 °C / 72 h) | ISO 815As the sheet prints it: 23 °C / 72 h ISO 815 | |
| Compression set orientation not stated | 45 %p. 2: Compression set (70 °C / 24 h) | ISO 815As the sheet prints it: 70 °C / 24 h ISO 815 | |
| Tensile stress at 100 % elongation orientation not stated | 6 MPap. 2: Stress at 100% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Tensile stress at 300 % elongation orientation not stated | 10 MPap. 2: Stress at 300% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Glass transition temperature | -42 °Cp. 2: Glass transition temperature (10 °C/min) | ISO 11357As the sheet prints it: ISO 11357-1/-2 | |
| Density | 1120 kg/m³p. 2: Material density | ISO 1183 | |
Print settings
- Nozzle
- 240 °Cown data sheet
- Bed
- 45–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 1 hown data sheet
- Hardened nozzle
- not stated
Its 4 print profiles, in the documents' words
- Nozzle 240 °C; Bed Small parts Room temperature (no heating); Large parts 45–50 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 3: Recommended printing settings; p. 3: Nozzle 0.4 mm
- Nozzle 242 °C; Bed Small parts Room temperature (no heating); Large parts 45–50 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 3: Recommended printing settings: Nozzle 0.6 mm
- Nozzle 245 °C; Bed Small parts Room temperature (no heating); Large parts 45–50 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 3: Recommended printing settings: Nozzle 0.8 mm
- Nozzle 248 °C; Bed Small parts Room temperature (no heating); Large parts 45–50 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 4: Recommended printing settings: Nozzle 1.0 mm
Price
Not in the price sample.
Its 2 documents
What the maker says (12)
- Good for
Medical & Orthopedic: Custom insoles and prosthetic components
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Good for
Fashion & Accessories: Textile printing, bags, and wearable items
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Good for
Footwear Production: Soles, custom shoes, and sandals
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Benefits
Material Safety: Non-toxic and skin-safe formulation
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Benefits
Chemical Resistance: Resistant to solvents and fuels
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Benefits
With 650% elongation and Shore 82A hardness, this premium TPU delivers outstanding elasticity and precision, returning to its original shape without deformation.
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Benefits
Superior Recovery: Returns to original shape after stretching
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Odour and emissions
Odorless, skin-safe, and resistant to fuels and solvents
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Printing advice
Ideal for direct-drive printers, it ensures excellent bed adhesion without a heated bed or adhesives.
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 1 - Moisture sensitivity
Drying is crucial for optimal results
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 3 - Printing advice
Print multiple small parts simultaneously for better results.
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 5 - Printing advice
Use maximum travel speed to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 82Ap. 5
Essentium TPU 80A-ZStrength XY, MPa22Strength Z, MPa6Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C230–250Bed, °C50–80Chamber, °C—Drying, °C, h—
Essentium TPU 80A-ZEssentium
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Z7 values | |||
| Tensile strength (yield or break not stated) XY | 22 MPap. 1: Tensile Strength, MPa (XY) | ASTM D638 | in the median |
| Tensile strength (yield or break not stated) Z (ZX) | 6 MPap. 1: Tensile Strength, MPa (ZX) | ASTM D638 | in the median |
| Elongation at break XY | 729 %p. 1: Elongation at Break, % (XY) | ASTM D638 | in the median |
| Elongation at break Z (ZX) | 109 %p. 1: Elongation at Break, % (ZX) | ASTM D638 | in the median |
| Hardness | 80 Shore Ap. 1: Shore Hardness ISO 868 | ISO 868 | in the median |
| Tear strength orientation not stated | 55 kN/mp. 1: Tear Strength, kN/m | ISO 34As the sheet prints it: ISO 34-1 | |
| Abrasion loss | 30 mm3p. 1: Abrasion Loss, mm3 | ISO 4649 | |
Print settings
- Nozzle
- 230–250 °Cown data sheet
- Bed
- 50–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle , °C 230 – 250; Bed , °C 50 – 80Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 1: Recommended printing settings: Nozzle Temperature; p. 1: Bed Material
Price
Not in the price sample.
Its 2 documents
What the maker says (7)
- Benefits
With non-marring surface properties, you don’t have to worry about latent failures in electronics.
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 1 - Benefits
Currently, Essentium TPU 80A-Z is the softest 3D printing material that can be printed on any open-source printer.
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 1 - Benefits
It has excellent elongation at break and impact strength and has a low friction surface that allows for easier feeding while printing.
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 1 - Good for
Electronics manufacturing ESD safe jigs and fixtures
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 2 - Good for
Bumpers, vibration absorbers, isolation mounts
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 2 - Benefits
Excellent chemical, solvent, oil and ozone resistance
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 2 - Benefits
Excellent abrasion and wear resistance
Essentium / Nexa3D, technical data sheet ESSENTIUM TPU 80A-Zp. 2
Recreus 70AStrength XY, MPa32Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C240Bed, °C45–50Chamber, °C—Drying, °C, h55≥ 1 h
Recreus 70ARecreus
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET FILAFLEX 70A11 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 32 MPap. 2: Tensile strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 900 %p. 1: elongation of up to | printed specimen (implied by the document), no standard stated | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 900 %p. 2: Elongation at break | printed specimen (implied by the document), DIN 53504As the sheet prints it: DIN 53504-S2 | in the median |
| Hardness | 70 Shore Ap. 2: Hardness (Shore A, 3 s) | ISO 7619As the sheet prints it: Shore A 3 s ISO 7619-1 | in the median |
| Abrasion loss orientation not stated | 45 mm³p. 2: Abrasion resistance | ISO 4649 | |
| Compression set orientation not stated | 20 %p. 2: Compression set (23 °C / 72 h) | ISO 815As the sheet prints it: 23 °C / 72 h ISO 815 | |
| Compression set orientation not stated | 39 %p. 2: Compression set (70 °C / 24 h) | ISO 815As the sheet prints it: 70 °C / 24 h ISO 815 | |
| Tensile stress at 100 % elongation orientation not stated | 3,5 MPap. 2: Stress at 100% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Tensile stress at 300 % elongation orientation not stated | 6,3 MPap. 2: Stress at 300% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Glass transition temperature | -50 °Cp. 2: Glass transition temperature (10 °C/min) | ISO 11357As the sheet prints it: ISO 11357-1/-2 | |
| Density | 1080 kg/m³p. 2: Material density | ISO 1183 | |
Print settings
- Nozzle
- 240 °Cown data sheet
- Bed
- 45–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 1 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240 °C; Bed Small parts Room temperature (no heating); Large parts 45–50 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 2: Recommended printing settings; p. 2: Nozzle 0.4 mm
Price
Not in the price sample.
Its 2 documents
What the maker says (11)
- Good for
Medical & Orthopedic: Custom insoles and prosthetic components
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Good for
Fashion & Accessories: Textile printing, bags, and wearable items
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Good for
Footwear Production: Soles, custom shoes, and sandals
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Benefits
Chemical Resistance: Resistant to fuels and solvents
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Benefits
Filaflex 70A TPU delivers exceptional elasticity, making it an ideal solution for ultra-soft and elastic 3D printed parts.
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Benefits
Designed for professional 3D printing applications, Filaflex 70A provides excellent bed adhesion without the need for a heated bed or adhesives.
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Benefits
Elastic Recovery: Returns to original shape after stretching
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Odour and emissions
Material Safety: Odorless and skin-safe formulation
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 1 - Moisture sensitivity
Drying is crucial for optimal results
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 2 - Printing advice
Print multiple small parts simultaneously for better results.
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 4 - Printing advice
Use maximum travel speed to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 70Ap. 4
Recreus 60AStrength XY, MPa26Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C235Bed, °C40–45Chamber, °C—Drying, °C, h55≥ 1 h
Recreus 60ARecreus
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET FILAFLEX 60A10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 26 MPap. 2: Tensile strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 950 %p. 2: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 63 Shore Ap. 2: Hardness (Shore A, 3 s) | ISO 7619As the sheet prints it: Shore A 3 s ISO 7619-1 | in the median |
| Abrasion loss orientation not stated | 45 mm³p. 2: Abrasion resistance | ISO 4649 | |
| Compression set orientation not stated | 40 %p. 2: Compression set (23 °C / 72 h) | ISO 815As the sheet prints it: 23 °C / 72 h ISO 815 | |
| Compression set orientation not stated | 25 %p. 2: Compression set (70 °C / 24 h) | ISO 815As the sheet prints it: 70 °C / 24 h ISO 815 | |
| Tensile stress at 100 % elongation orientation not stated | 2,5 MPap. 2: Stress at 100% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Tensile stress at 300 % elongation orientation not stated | 4,5 MPap. 2: Stress at 300% elongation | DIN 53504As the sheet prints it: DIN 53504-S2 | |
| Glass transition temperature | -54 °Cp. 2: Glass transition temperature (10 °C/min) | ISO 11357As the sheet prints it: ISO 11357-1/-2 | |
| Density | 1070 kg/m³p. 2: Material density | ISO 1183 | |
Print settings
- Nozzle
- 235 °Cown data sheet
- Bed
- 40–45 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 1 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 235 °C; Bed Small parts Room temperature (no heating); Large parts 40–45 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 2: Recommended printing settings; p. 2: Nozzle 0.4 mm
Price
Not in the price sample.
Its 2 documents
What the maker says (12)
- Good for
Medical & Orthopedic: Custom insoles and prosthetic components
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Good for
Fashion & Accessories: Textile printing, bags, and wearable items
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Good for
Footwear Production: Soles, custom shoes, and sandals
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Benefits
Material Safety: Non-toxic and skin-safe formulation
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Benefits
Chemical Resistance: Resistant to solvents and fuels
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Benefits
Filaflex 60A TPU is the softest and most elastic filament in the Filaflex range, setting a new standard in flexible 3D printing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Benefits
Elastic Recovery: Returns to original shape after deformation
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Benefits
Excellent Bed Adhesion: Prints without heated bed or additional adhesives
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Odour and emissions
odorless, skin-safe, and resistant to fuels and solvents
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 1 - Moisture sensitivity
Drying is crucial for optimal results
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 2 - Printing advice
Print multiple small parts simultaneously for better results.
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 4 - Printing advice
Use maximum travel speed to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 60Ap. 4
Extrudr FLEX SEMISOFTStrength XY, MPa36Strength Z, MPa—Modulus XY, GPa0.06Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C50–90Chamber, °CnoneDrying, °C, h6012 h
Extrudr FLEX SEMISOFTExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TPU FLEX Semisoft Filament – Shore Hardness A85 | Extrudr10 values | |||
| Tensile modulus orientation not stated | 60 MPap. 1: Tensile modulus (Young's modulus) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 36 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 36 MPap. 1: Tensile stress at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 504 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 55 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | ~68 °Cp. 1: Vicat softening temp. (VST/B50) | ISO 306 | |
| Decomposition temperature | 230 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Density | 1.17 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Water absorption | 0.8 %p. 1: Water absorption (saturation, 23°C) | no standard namedAs the sheet prints it: saturation | |
| Mould shrinkage orientation not stated | 0.8–1.2 %p. 1: Mould shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFT8 valuesThe same values also in Extrudr, TECHNISCHES DATENBLATT FLEX SEMISOFT and Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFT.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 42 MPap. 1: Tensile modulus (E-Modulus) SO 527-2/5A/500 MPaalso in Extrudr, TECHNISCHES DATENBLATT FLEX SEMISOFT | no standard namedAs the sheet prints it: 500 MPa E-Modulus SO 527-2/5A/ | not in the median: measured on a moulded bar |
| Elongation at break | 550 %p. 1: Ultimate elongation ISO 527-2/5A/500 %also in Extrudr, TECHNISCHES DATENBLATT FLEX SEMISOFT | ISO 527As the sheet prints it: ISO 527-2/5A/500 | not in the median: measured on a moulded bar |
| Hardness | 85A - 88A Shore Atranscription correctedp. 1: Shore hardness ISO 868 Shore | ISO 868 | not in the median: the resin supplier's value, not a printed part |
| Compression strength | 42 MPap. 1: Compressive strength DIN 53452 MPaalso in Extrudr, TECHNISCHES DATENBLATT FLEX SEMISOFT | DIN 53452 | |
| Glass transition temperature | -34 °Cp. 1: Glass transition temperature °C | no standard stated | |
| Vicat softening temperature | 98 °Cp. 1: VICAT A (VST) ISO 306 °Calso in Extrudr, TECHNISCHES DATENBLATT FLEX SEMISOFT | ISO 306 | |
| Melting temperature | 180-230 °Cp. 1: Melting temperature ISO 3146-C °Calso in Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFT | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.18 g/cm³p. 1: Density ISO 2781 g/cm³also in Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFT | ISO 2781 | |
| Extrudr, TECHNISCHES DATENBLATT FLEX SEMISOFT3 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Poisson's ratio | 0.46p. 1: Poissonzahl | no standard namedAs the sheet prints it: Nach Hencky | |
| Tensile stress at 100 % elongation | 11 (100%) MPap. 1: (blank label under Bruchspannung) (11 (100%)) | ISO 527As the sheet prints it: ISO 527-2/5A/500 | |
| Tensile stress at 300 % elongation | 22 (300%) MPap. 1: (blank label under Bruchspannung) (22 (300%)) | ISO 527As the sheet prints it: ISO 527-2/5A/500 | |
| Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFT2 values | |||
| Tear strength orientation not stated | 135 kN/mp. 1: Tear strength ISO 34-1B kN/m | ISO 34As the sheet prints it: ISO 34-1B | |
| Abrasion loss | 25 mm³p. 1: Abrasion resistance ISO 4649-A mm³ | ISO 4649As the sheet prints it: ISO 4649-A | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 50–90 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 220-250°C; Bed 50-90°CExtrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
- Nozzle 220-250°C; Bed 50-90°CExtrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle; p. 1: Adhesive
- Nozzle 220–250 °C; Bed 50–90 °C; Drying Drying temperature 60 °C; Drying time 12 hExtrudr, TPU FLEX Semisoft Filament – Shore Hardness A85 | Extrudrp. 1: Print Settings, Drying (drying only; p. 1: Recommended settings for printers with a 0.4 mm nozzle
- Nozzle 220-250°C; Bed 50-90°CExtrudr, TECHNISCHES DATENBLATT FLEX SEMISOFTp. 1: Düse; p. 1: Heizbett; p. 1: Vorgeschlagene Einstellungen für Drucker mit 0.4 mm Düse
Price
Not in the price sample.
Its 5 documents
What the maker says (7)
- Good for
Due to its low evaporation rate, FLEX Semisoft is particularly suitable for automotive interior applications.
Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1 - Benefits
Very impact and breakage resistant
Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1 - Benefits
Halogen-free
Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1 - Benefits
Free of silicone, plasticisers and oils
Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1 - Benefits
Based on Polycaprolactone-Polyester, it offers an extensibility of up to 550%, high material quality, high chemical resistance, and a heat distortion resistance of up to 98°C, making the material suitable for numerous industrial applications.
Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1 - Adhesion between layers
Extreme layer adhesion
Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
UV-resistant
UVExtrudr, TECHNICAL DATA SHEET FLEX SEMISOFTp. 1
Siraya Tech Flex TPU 85AStrength XY, MPa24Strength Z, MPa—Modulus XY, GPa0.013Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–225Bed, °C20–50Chamber, °C—Drying, °C, h50–654–6 h
Siraya Tech Flex TPU 85ASiraya Tech
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printing10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 13 MPap. 1: Young’s Modulus (MPa) | printed specimen (implied by the document), ASTM D638 | in the median |
| Tensile break strength XY | 24 ± 3.0 MPap. 1: Tensile Stress at Break (MPa) | printed bar (its stated orientation says so), ISO 527 | in the median |
| Izod impact strength | 4.4 kJ/m2p. 1: IZOD Impact (Notched 72F) kJ/m2 | printed specimen (implied by the document), ASTM D256As the sheet prints it: 72F D256 | not in the median: to another standard |
| Hardness | 85 Shore Ap. 1: Shore Hardness | ISO 7619 | in the median |
| Tensile stress at 100 % elongation orientation not stated | 6.7 MPap. 1: Tensile stress at 100% | no standard namedAs the sheet prints it: 100% | |
| Tensile stress at 200 % elongation orientation not stated | 8.4 MPap. 1: Tensile stress at 200% | no standard namedAs the sheet prints it: 200% | |
| Tensile stress at 300 % elongation orientation not stated | 10.8 MPap. 1: Tensile stress at 300% | no standard namedAs the sheet prints it: 300% | |
| Vicat softening temperature | 76 ℃p. 1: Vicat softening temperature ℃ | ISO 306 | |
| Melting temperature | 200 ℃p. 1: Melting Point (℃) | no standard stated | |
| Density | 1.16 g/cm³p. 1: Filament Density g/cm³ | ISO 1183 | |
Print settings
- Nozzle
- 200–225 °Cown data sheet
- Bed
- 20–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 50–65 °C for 4–6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200°C to 225°C; Bed 20°C to 50°C; Drying If moisture absorption is suspected, dry the filament at 50°C - 65°C for 4-6 hoursSiraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1: Drying note; p. 1: (1) Temperature Settings; p. 1: (3) Nozzle Size; p. 1: (5) Build Platform Material
Price
Not in the price sample.
Its 2 documents
What the maker says (11)
- Good for
Wearable Devices : Such as straps for smartwatches, insoles, etc.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Good for
Flexible Connectors : Like hoses, vibration dampening pads, etc.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Good for
Medical Device Accessories : Custom wrist braces, supports, etc.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Good for
Everyday Items : Phone cases, shock- absorbing pads, protective covers, and more.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Moisture sensitivity
Using a dry box with desiccant, maintaining humidity below 15%, is ideal for prolonged storage.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Moisture sensitivity
(Filament dryer is not recommended because heating cannot maintain a uniform temperature throughout the dryer)
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Moisture sensitivity
TPU filaments, including Flex TPU 85A, are prone to moisture absorption, which can adversely affect print quality.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Printing advice
Start with short and slow retraction first.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Printing advice
Adjust retraction settings and print speed to tackle stringing.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Printing advice
Improve bed adhesion using a glue stick or hairspray, or by slightly increasing the bed temperature.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1 - Printing advice
For best results, mount the filament directly above the extruder to facilitate the shortest and most efficient path from the spool to the extruder, thus significantly enhancing the print quality and success rate.
Siraya Tech, Flex 85A TPU Filament - Flexible, Durable, and High-Speed Printingp. 1
FormFutura ReForm rTPU 85AStrength XY, MPa28Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–250Bed, °C60–80Chamber, °CnoneDrying, °C, h50–7024 h
FormFutura ReForm rTPU 85AFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85A5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 28 MPap. 1: Tensile strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 355%p. 1: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 85A Shore Ap. 1: Shore A hardness | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Melting temperature | 165 °Cp. 1: Melting Point | no standard stated | |
| Density | 1,21 g/cm³p. 1: Specific Gravity (23°C) | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–70 °C for 24 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle ± 220 - 250°C; Bed ± 60 - 80°C; Drying 24 hours @ ~50-70 °CFormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1: Nozzle temp, Heat bed, Enclosure, Drying; p. 1: Buildplate adhesion
Price
Not in the price sample.
Its 2 documents
What the maker says (11)
- Good for
ReForm rTPU 85A is ideal for producing shock-absorbing, abrasion-resistant, and highly elastic 3D printed parts.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Good for
Footwear components – midsoles, insoles, and cushioning parts.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Good for
Orthopedic models & braces – soft but sturdy for patient comfort.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Good for
Protective covers & grips – safe, flexible, and skin-friendly.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Good for
Seals, gaskets, and O-rings – flexible, abrasion-resistant, and resilient under stress.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Good for
Shock absorbers & vibration dampers – for machinery, robotics, or automotive parts.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Good for
Protective bumpers – cushioning and impact resistance.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Benefits
Made with nearly 100% recycled TPU from certified and traceable European sources.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Benefits
Superior shock absorption and vibration damping.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Benefits
This recycled TPU filament is engineered for maximum elasticity and resilience and delivers an outstanding balance between durability, flexibility, and printability.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1 - Benefits
Exceptional abrasion resistance and resilience.
FormFutura, TECHNICAL DATA SHEET ReForm rTPU 85Ap. 1
Spectrum S-Flex 85AStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–70Chamber, °CnoneDrying, °C, h903 h
Spectrum S-Flex 85ASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET S-Flex 85A10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 40 MPap. 1: Tensile strength | DIN 53504 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 650,00%p. 1: Ultimate elongation | DIN 53504 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 85 Shore Ap. 1: Shore hardness A | ISO 7619 | in the median |
| Abrasion loss | 35 mm3p. 1: Abrasion Resistance | ISO 4649 | |
| Compression set | 24,00%p. 1: Compression set / 70 h @ 23°C | ISO 815As the sheet prints it: ISO 815; time=70 h | |
| Compression set | 42,00%p. 1: Compression set / 24 h @ 70°C | ISO 815As the sheet prints it: ISO 815; time=24 h | |
| Tensile stress at 100 % elongation orientation not stated | 7,3 MPap. 1: 100% Tensile Modulus | DIN 53504 | |
| Tensile stress at 300 % elongation orientation not stated | 11 MPap. 1: 300% Tensile Modulus | DIN 53504 | |
| Density | 1,11 g/cm3p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Mould shrinkage orientation not stated | 0,80%p. 1: Shrinkage | ASTM D955As the sheet prints it: D 955 | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| HDT at 0.45 MPa | 72°Cphysically implausiblep. 4: HDT B | no standard namedAs the sheet prints it: method=B | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 90 °C for 3 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 200-230°C; Bed 50-70°CSpectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Bed 50-70 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Drying 90°C, 3h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
Not in the price sample.
Its 5 documents
What the maker says (7)
- Benefits
reduced stringing while the printer is running idle
Spectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1 - Benefits
An additional advantage that allows obtaining a perfect printout is very good adhesion of the first layer of the printed part to the working space, regardless of whether it is made of glass, steel, plastic or other material.
Spectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1 - Warping and shrinkage
low shrinkage
Spectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1 - Warping and shrinkage
Shrinkage 0,80% D 955
Spectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1 - Moisture sensitivity
Dry box recommended
Spectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1 - Benefits
Up to 650% elongation at break, Shore 85A, high tensile & tear resistance
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Chemicals and environment (1)
- Hydrolytic stability: described in words
high resistance to hydrolysis
Hydrolysis / dimensional stabilitySpectrum, TECHNICAL DATA SHEET S-Flex 85Ap. 1
Spectrum THE FILAMENT TPU 82AStrength XY, MPa28Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–80Chamber, °CnoneDrying, °C, h—
Spectrum THE FILAMENT TPU 82ASpectrum
Data sheet shared with The Filament TPU 82A: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 82A5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 28 N/mm2p. 1: Tensile Strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 350 %p. 1: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 82A Shore Ap. 1: Shore hardness A | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Abrasion loss | 30 mm3p. 1: Abrasion Resistance | ISO 4649 | |
| Density | 1.21 g/cm3p. 1: Specific Gravity | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 210-240°C; Bed 40-80°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 82Ap. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: settings footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
up to 350% elongation at break, Shore 82A, high tensile & tear resistance
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 82Ap. 1 - Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 82Ap. 1 - Moisture sensitivity
Dry box recommended
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 82Ap. 1
Spectrum THE FILAMENT TPU 87AStrength XY, MPa29.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–80Chamber, °CnoneDrying, °C, h—
Spectrum THE FILAMENT TPU 87ASpectrum
Data sheet shared with The Filament TPU 87A: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 87A5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 29,5 N/mm2p. 1: Tensile Strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 350 %p. 1: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 87A Shore Ap. 1: Shore hardness A | ISO 7619As the sheet prints it: ISO 7619-1 | in the median |
| Abrasion loss | 30 mm3p. 1: Abrasion Resistance | ISO 4649 | |
| Density | 1.21 g/cm3p. 1: Specific Gravity | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 210-240°C; Bed 40-80°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 87Ap. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: settings footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
up to 350% elongation at break, Shore 87A, high tensile & tear resistance
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 87Ap. 1 - Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 87Ap. 1 - Moisture sensitivity
Dry box recommended
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 87Ap. 1
The Filament TPU 82AStrength XY, MPa28Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–80Chamber, °CnoneDrying, °C, h—
The Filament TPU 82AThe Filament
Data sheet shared with Spectrum THE FILAMENT TPU 82A: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 210-240°C; Bed 40-80°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 82Ap. 1: Recommended printing settings; p. 1: Adhesive; p. 1: settings are based on a 0.4 mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 82Ap. 1
The Filament TPU 87AStrength XY, MPa29.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–80Chamber, °CnoneDrying, °C, h—
The Filament TPU 87AThe Filament
Data sheet shared with Spectrum THE FILAMENT TPU 87A: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 210-240°C; Bed 40-80°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 87Ap. 1: Recommended printing settings; p. 1: Adhesive; p. 1: settings are based on a 0.4 mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT TPU 87Ap. 1
Smart Materials 3D Smartfil FLEX 77AStrength XY, MPa22Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C220–240Bed, °C0–50Chamber, °C—Drying, °C, h—
Smart Materials 3D Smartfil FLEX 77ASmart Materials 3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Smart Materials 3D, FICHA TÉCNICA FLEX 77A (Smartfil)5 values | |||
| Tensile strength (yield or break not stated) XY | 22 MPap. 1: Resistencia a la tracción, PLANO XY | ISO 527print settingsPLANO XY column; Footnote (1): values obtained on printed test pieces, nozzle 0,4 mm, rectilinear infill 100 %, layer height 0,2 mm. | in the median |
| Tensile strain at strength XY | 775 %p. 1: Alargamiento al esfuerzo máximo, PLANO XY | ISO 527print settingsPLANO XY column; Footnote (1): values obtained on printed test pieces, nozzle 0,4 mm, rectilinear infill 100 %, layer height 0,2 mm. | listed under other properties |
| Hardness | 77 Shore Ap. 1: Dureza | ISO 7619As the sheet prints it: ISO 7619-1print settingsPLANO XY column; Footnote (1): values obtained on printed test pieces, nozzle 0,4 mm, rectilinear infill 100 %, layer height 0,2 mm. | in the median |
| Vicat softening temperature | 66 °Cp. 1: VICAT A50 | ISO 306As the sheet prints it: ISO 306 VICAT A50 | |
| Density | 1,07 g/cm3p. 1: Densidad | ASTM D792 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 0–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220 – 240 ˚C; Bed 0 – 50 ˚CSmart Materials 3D, FICHA TÉCNICA FLEX 77A (Smartfil)p. 1: PROPIEDADES DE IMPRESIÓN
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
SMARTFIL FLEX 77A es un termoplástico elastómero diseñado para obtener un filamento extremadamente suave y altamente elástico.
Smart Materials 3D, FICHA TÉCNICA FLEX 77A (Smartfil)p. 1 - Good for
Con una dureza de 77A, permite crear objetos muy blandos y flexibles, ideales para aplicaciones que requieren gran amortiguación y un tacto agradable.
Smart Materials 3D, FICHA TÉCNICA FLEX 77A (Smartfil)p. 1 - Surface finish
Compatible con una amplia variedad de impresoras, ofrece un acabado suave y preciso, perfecto para proyectos que demandan máxima flexibilidad y confort.
Smart Materials 3D, FICHA TÉCNICA FLEX 77A (Smartfil)p. 1
colorFabb varioShore 85AStrength XY, MPa6.2Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg—Nozzle, °C250Bed, °C60Chamber, °C—Drying, °C, h606 h
colorFabb varioShore 85AcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet varioShore 85A6 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus orientation not stated | 53,7 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) XY | 6,2 MPap. 1: Tensile Strength Tensile, ISO 37-1A | printed specimen, ISO 37As the sheet prints it: ISO 37-1Aprint settingsThe specimens have been printed in XY plane, using 0.2 mm layer height, 100% infill, 0.4 mm nozzle, 250 ˚C nozzle temperature and 60 ˚C bed temperature. | in the median |
| Elongation at break XY | 585 %p. 1: Elongation at break Tensile, ISO 37-1A | printed specimen, ISO 37As the sheet prints it: ISO 37-1Aprint settingsThe specimens have been printed in XY plane, using 0.2 mm layer height, 100% infill, 0.4 mm nozzle, 250 ˚C nozzle temperature and 60 ˚C bed temperature. | in the median |
| Flexural modulus orientation not stated | 45,0 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | not in the median: measured on a moulded bar |
| Hardness | 33 Shore Dp. 1: Shore hardness ISO 7619-1 | ISO 7619As the sheet prints it: ISO 7619-1 | listed under other properties |
| Density | 1,14 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
Print settings
- Nozzle
- 250 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 250 °C; Bed 60 °CcolorFabb, Technical datasheet varioShore 85Ap. 2: Recommended printing settings
- Drying 60 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Good for
Softer and more compressible than standard TPU, it is ideal for comfort-focused applications such as insoles, grips, padding, wearables and ergonomic components.
colorFabb, Technical datasheet varioShore 85Ap. 1 - Benefits
varioShore TPU 85A is a lightweight foaming TPU filament designed for soft, flexible and cushioned 3D printed parts.
colorFabb, Technical datasheet varioShore 85Ap. 1
eSUN eFlexStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—Price, CAD/kg50Nozzle, °C220–250Bed, °C45–60Chamber, °C—Drying, °C, h55≥ 4 h
eSUN eFlexeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, eFlex Technical Data Sheet3 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 52 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 500 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Density | 1.12 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 220 - 250℃; Bed 45-60°C; Drying 55℃/>4HeSUN, eFlex Technical Data Sheetp. 2: Recommended printing settings
Price
50 CAD/kgits one regular price in the sample
1 listing
- Shop3D.ca: 50 CAD/kgeSun eFlex TPU-87A (Flexible) Filament - Clear - 1.75mm - 1kg (SKU TPU-87A175T1Y1)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (6)
- Good for
Shoe material • Conveying pipeline
eSUN, eFlex Technical Data Sheetp. 1 - Benefits
Flexible and soft • High toughness
eSUN, eFlex Technical Data Sheetp. 1 - Pitfalls and limitations
The nozzle may have impurities after printing for a long time.
eSUN, eFlex Technical Data Sheetp. 2 - Moisture sensitivity
It is recommended to use it with eBOX cartridges when printing.
eSUN, eFlex Technical Data Sheetp. 2 - Printing advice
It is recommended to use it with the cleaning filament.
eSUN, eFlex Technical Data Sheetp. 2 - Printing advice
It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, and eFlex materials cannot be printed with a remote extruder.
eSUN, eFlex Technical Data Sheetp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.