TPU-LW
4 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
4 products
Key
- not published
How the numbers are worked out
Siraya Tech Flex TPU AirStrength XY, MPa10.3Price, CAD/kg70Nozzle, °C230–270Bed, °C30–45Drying, °C, h70–804–6 h
Siraya Tech Flex TPU AirSiraya Tech
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDS30 valuesUnless a row says otherwise: printed specimen | |||
| Tensile yield strength XY | 6.3 MPap. 1: Tensile Yield Strength (MPa) (Mechanical Properties Print @ 240C Print @ 250C Method; 6.3) | ISO 527As the sheet prints it: ISO 527; print temperature=240C | not in the median: another value of this product is in it |
| Tensile yield strength XY | 4.4 MPap. 1: Tensile Yield Strength (MPa) (Mechanical Properties Print @ 240C Print @ 250C Method; 4.4) | ISO 527As the sheet prints it: ISO 527; print temperature=250C | not in the median: another value of this product is in it |
| Tensile yield strength XY | 3.4 MPap. 1: Tensile Yield Strength (MPa) (Mechanical Properties Print @ 260C Print @ 270C Method; 3.4) | ISO 527As the sheet prints it: ISO 527; print temperature=260C | not in the median: another value of this product is in it |
| Tensile yield strength XY | 2.8 MPap. 1: Tensile Yield Strength (MPa) (Mechanical Properties Print @ 260C Print @ 270C Method; 2.8) | ISO 527As the sheet prints it: ISO 527; print temperature=270C | not in the median: another value of this product is in it |
| Tensile break strength XY | 10.3 MPap. 1: Tensile Breaking Strength (MPa) (Mechanical Properties Print @ 240C Print @ 250C Method; 10.3) | ISO 527As the sheet prints it: ISO 527; print temperature=240C | not in the median: the only value of its test, shown as published |
| Tensile break strength XY | 7.2 MPap. 1: Tensile Breaking Strength (MPa) (Mechanical Properties Print @ 240C Print @ 250C Method; 7.2) | ISO 527As the sheet prints it: ISO 527; print temperature=250C | not in the median: another value of this product is in it |
| Tensile break strength XY | 5.0 MPap. 1: Tensile Breaking Strength (MPa) (Mechanical Properties Print @ 260C Print @ 270C Method; 5.0) | ISO 527As the sheet prints it: ISO 527; print temperature=260C | not in the median: another value of this product is in it |
| Tensile break strength XY | 3.8 MPap. 1: Tensile Breaking Strength (MPa) (Mechanical Properties Print @ 260C Print @ 270C Method; 3.8) | ISO 527As the sheet prints it: ISO 527; print temperature=270C | not in the median: another value of this product is in it |
| Elongation at break XY | 629 %p. 1: Elongation at Break (%) (Mechanical Properties Print @ 240C Print @ 250C Method; 629) | ISO 527As the sheet prints it: ISO 527; print temperature=240C | not in the median: the only value of its test, shown as published |
| Elongation at break XY | 605 %p. 1: Elongation at Break (%) (Mechanical Properties Print @ 240C Print @ 250C Method; 605) | ISO 527As the sheet prints it: ISO 527; print temperature=250C | not in the median: another value of this product is in it |
| Elongation at break XY | 547 %p. 1: Elongation at Break (%) (Mechanical Properties Print @ 260C Print @ 270C Method; 547) | ISO 527As the sheet prints it: ISO 527; print temperature=260C | not in the median: another value of this product is in it |
| Elongation at break XY | 475 %p. 1: Elongation at Break (%) (Mechanical Properties Print @ 260C Print @ 270C Method; 475) | ISO 527As the sheet prints it: ISO 527; print temperature=270C | not in the median: another value of this product is in it |
| Hardness | 78 Shore Ap. 1: Hardness (Shore A) (Mechanical Properties Print @ 240C Print @ 250C Method; 78) | ISO 7619As the sheet prints it: ISO 7619; print temperature=240C | in the median |
| Hardness | 71 Shore Ap. 1: Hardness (Shore A) (Mechanical Properties Print @ 240C Print @ 250C Method; 71) | ISO 7619As the sheet prints it: ISO 7619; print temperature=250C | not in the median: another value of this product is in it |
| Hardness | 68 Shore Ap. 1: Hardness (Shore A) (Mechanical Properties Print @ 260C Print @ 270C Method; 68) | ISO 7619As the sheet prints it: ISO 7619; print temperature=260C | not in the median: another value of this product is in it |
| Hardness | 63 Shore Ap. 1: Hardness (Shore A) (Mechanical Properties Print @ 260C Print @ 270C Method; 63) | ISO 7619As the sheet prints it: ISO 7619; print temperature=270C | not in the median: another value of this product is in it |
| Hardness | ~85A Shore Ap. 1: Approx. Shore Hardness (~85A) | specimen not stated, no standard namedAs the sheet prints it: print temperature=230°C - 240°C | not in the median: another value of this product is in it |
| Hardness | ~75A Shore Ap. 1: Approx. Shore Hardness (~75A) | specimen not stated, no standard namedAs the sheet prints it: print temperature=250°C | not in the median: another value of this product is in it |
| Hardness | ~70A Shore Ap. 1: Approx. Shore Hardness (~70A) | specimen not stated, no standard namedAs the sheet prints it: print temperature=260°C | not in the median: another value of this product is in it |
| Hardness | ~65A Shore Ap. 1: Approx. Shore Hardness (~65A) | specimen not stated, no standard namedAs the sheet prints it: print temperature=270°C | not in the median: another value of this product is in it |
| Vicat softening temperature | 83 °Cp. 1: Vicat Softening Temp (°C) (Mechanical Properties Print @ 240C Print @ 250C Method; 83) | ISO 306As the sheet prints it: ISO 306; print temperature=240C | |
| Vicat softening temperature | 74 °Cp. 1: Vicat Softening Temp (°C) (Mechanical Properties Print @ 240C Print @ 250C Method; 74) | ISO 306As the sheet prints it: ISO 306; print temperature=250C | |
| Vicat softening temperature | 65 °Cp. 1: Vicat Softening Temp (°C) (Mechanical Properties Print @ 260C Print @ 270C Method; 65) | ISO 306As the sheet prints it: ISO 306; print temperature=260C | |
| Vicat softening temperature | 53 °Cp. 1: Vicat Softening Temp (°C) (Mechanical Properties Print @ 260C Print @ 270C Method; 53) | ISO 306As the sheet prints it: ISO 306; print temperature=270C | |
| Density | 1.15 g/cm3p. 1: Filament Density (g/cm3) | Filament, ISO 1183 | |
| Density | 0.88 g/cm³p. 1: Printed Part Density (g/cm³) (Mechanical Properties Print @ 240C Print @ 250C Method; 0.88) | ISO 845As the sheet prints it: ISO 845; print temperature=240C | |
| Density | 0.7 g/cm³p. 1: Printed Part Density (g/cm³) (Mechanical Properties Print @ 240C Print @ 250C Method; 0.7) | ISO 845As the sheet prints it: ISO 845; print temperature=250C | |
| Density | 0.59 g/cm³p. 1: Printed Part Density (g/cm³) (Mechanical Properties Print @ 260C Print @ 270C Method; 0.59) | ISO 845As the sheet prints it: ISO 845; print temperature=260C | |
| Density | 0.51 g/cm³p. 1: Printed Part Density (g/cm³) (Mechanical Properties Print @ 260C Print @ 270C Method; 0.51) | ISO 845As the sheet prints it: ISO 845; print temperature=270C | |
| Melt mass-flow rate | 8 g/10minp. 1: Melt Index (MFI) | specimen not stated, no standard stated | |
| Siraya Tech, Siraya Tech TPU Air User Manual1 value | |||
| Density | 0.54 g/cm³ (at max foaming temp)p. 1: Printed Part Density (Foamed) | no standard stated | |
Print settings
- Nozzle
- 230–270 °Cown data sheet
- Bed
- 30–45 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70–80 °C for 4–6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 230−270°C; Bed 30−45°C; Drying Dry 4-6 hours at 70°C - 80°C before printingSiraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle Temperature; p. 1: Build Plate Temperature; source-scope review2026-10-01: complete ownTDS product body and Recommended Printing Conditions, no nozzle-material/hardening or fibre-abrasion requirement stated; p. 1: Recommended Nozzle Diameter; p. 1: Recommended Build Surface
- Nozzle 230°C - 270°C; Bed 30°C - 45°C; Drying dry the filament thoroughly in a convection oven at 70°C - 80°C for 4-6 hours before printingSiraya Tech, Siraya Tech TPU Air User Manualp. 1: Wet Filament?; p. 1: Nozzle Temperature; p. 1: Nozzle Diameter; p. 1: Bed Temperature; p. 1: Build Surface
Price
70 CAD/kgits one regular price in the sample
1 listing
- Amazon.ca: 70 CAD/kgSiraya Tech Flex TPU Air - Active Foaming 3D Printer Filament, Black, 1kg (SKU B0DZCD4Z9M)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (52)
- Good for
Lightweighting: Significantly reducing weight for drone parts, robotics, and more.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Good for
Customization: Printing unique matte-textured wearables and accessories.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Good for
Functional Prototyping: Rapidly validating prototypes requiring variable flexibility.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Benefits
Tunable Results: Controlled foaming via nozzle temperature.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Benefits
Half the Weight: Up to 50% lighter than standard TPUs.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Benefits
Easier Printing: Stiffer pre-extrusion filament improves compatibility.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Pitfalls and limitations
Active foaming materials naturally expand in the hotend, causing oozing during travel moves.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Pitfalls and limitations
Standard retraction settings are often ineffective.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Pitfalls and limitations
Material expansion causes oozing; retraction is generally ineffective.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Surface finish
Matte Finish: Unique, fabric-like texture.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Adhesion between layers
Strong Bonds: Excellent layer adhesion for durable & flexible parts.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Moisture sensitivity
Upon Opening Immediately place the spool in a filament dryer or a sealed container with plenty of active desiccant.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Moisture sensitivity
Print directly from the dry box if possible.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Moisture sensitivity
TPU Air is hygroscopic (absorbs moisture), which severely impacts foaming and print quality, causing bubbles, stringing, and poor layer adhesion.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
It is important to dial in flow rate as it is related to the temperature and how much the tpu air expanded as well as the flow rate of the extruder.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
Minimize Travel Print one model at a time whenever possible.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
Models designed with continuous extrusion paths (minimal jumping between features) will yield the cleanest results due to reduced oozing.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
If prints bond too strongly (especially on PEI), use a release agent like PVP glue stick, Magigoo, or even a light mist of Windex before printing.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
Higher temps = more foaming (lighter/softer).
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
Build Plate Temperature 30−45°C Avoid excessive heat to prevent over-adhesion.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
Use release agent (PVP glue, Magigoo) on PEI or highly adhesive surfaces.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
Cooling Fan Speed 100 Helps solidify the foamed structure quickly.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
A slightly slower, wider first layer (e.g., 20mm/s speed, 120% line width) can improve adhesion.
Siraya Tech, Siraya Tech Flex TPU Air FDM 3d printer Filament TDSp. 1 - Printing advice
Wet Filament? If you suspect moisture exposure, dry the filament thoroughly in a convection oven at 70°C - 80°C for 4-6 hours before printing. (A filament dryer is not recommended because heating cannot maintain a uniform temperature throughout the entire environment.)
Siraya Tech, Siraya Tech TPU Air User Manualp. 1: §3 Before Printing, Drying and Storage, Wet Filament - Benefits
Siraya Tech TPU Air isn't just another flexible filament; it's an active foaming TPU that puts you in control of the final weight and softness of your prints.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Surface finish
Imagine creating parts up to 50% lighter than standard TPU, with a unique, soft, fabric-like texture straight off the print bed!
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Good for
TPU Air unlocks exciting new possibilities for lightweight functional parts, custom padding, vibration dampeners, unique wearables, and so much more.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Surface finish
Higher print temperatures create lighter, softer parts with that amazing textured finish.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Benefits
Adjust print temperature to achieve hardness ranging from a firm ~85A down to a very flexible ~65A Shore.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Benefits
Engineered for better pre-print stiffness, TPU Air is compatible with a wide range of FDM/FFF printers, including many Bowden setups.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Surface finish
TPU Air prints boast a distinctive, appealing matte texture.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Good for
Perfect for applications where weight reduction and tunable softness are key design elements.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Moisture sensitivity
Immediately place the spool in a filament dryer or a sealed container with plenty of active desiccant (aim for <15% humidity).
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Moisture sensitivity
Always store the spool back in the provided resealable bag with the desiccant pack, ensuring it's tightly sealed.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Moisture sensitivity
If you suspect moisture exposure, dry the filament thoroughly in a convection oven at 70°C - 80°C for 4-6 hours before printing.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Moisture sensitivity
(A filament dryer is not recommended because heating cannot maintain a uniform temperature throughout the entire environment.)
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Turn Retraction OFF in your slicer (set Retraction Distance and Speed to 0).
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Print one model at a time whenever possible.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Avoid printing multiple separate objects simultaneously across the build plate.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Using your slicer's "sequential printing" feature (if available and suitable for the model) can also help.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Let the bed cool completely before attempting removal.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Ensure your bed is clean (wash with soap and water, then wipe with IPA) and perfectly leveled.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Higher temperatures activate more foaming, resulting in lighter, softer prints.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
A little heat helps adhesion, but too much can make removal tricky.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Recommendation: Start with PVP glue stick on glass or smooth steel for reliable adhesion and easier removal, especially as TPU can bond very strongly to surfaces like PEI.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Helps set the foamed structure quickly as it prints
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Slower speeds often yield better results with flexible.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Capable machines might handle up to 150 mm/s, but tune carefully.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Because the filament expands as it heats, you must reduce your flow rate significantly, especially at higher temperatures.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Over-extrusion will lead to poor results.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Printing advice
Calibration is essential: Print small test cubes (like a 20x20x10mm cube) at your target temperature, starting with the flow rates below and adjusting until you get clean surfaces without gaps or excessive bulging.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1 - Odour and emissions
Always print in a well-ventilated area.
Siraya Tech, Siraya Tech TPU Air User Manualp. 1
Recreus FILAFLEX 95 FOAMYStrength XY, MPa—Price, CAD/kg—Nozzle, °C248Bed, °C50–55Drying, °C, h55≥ 1 h
Recreus FILAFLEX 95 FOAMYRecreus
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMY7 valuesThe same values also in Recreus, Flexible Filaflex 95 Foamy filament.Unless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 33 MPap. 1: Tensile strength | Filament, DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a filament strand |
| Elongation at break orientation not stated | 400 %p. 1: Elongation at break | Filament, DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a filament strand |
| Hardness | 90 shore Ap. 1: Printing density 250ºC 90% Flow (hardness row) | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); flow=90%; time=3 s | not in the median: another value of this product is in it |
| Hardness | held back: the sheet's unit or table layout is unclearheld backp. 1: Printing density 250ºC 80% Flow (hardness row) (61 shore A) | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); flow=80%; time=3 s | not in the median: held back |
| Hardness | held back: the sheet's unit or table layout is unclearheld backp. 1: Printing density 250ºC 80% Flow (hardness row) (65 shore A) | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); flow=80%; time=3 s | not in the median: held back |
| Hardness | 70 shore Ap. 1: Printing density 250ºC 70% Flow (hardness row)also in Recreus, Flexible Filaflex 95 Foamy filament | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); flow=70%; time=3 s | not in the median: another value of this product is in it |
| Density | 1.2 g/cm3 (TDS prints "1,200" with European decimal separator)p. 1: Filament density | ISO 1183 | |
| Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMY3 valuesUnless a row says otherwise: Filament | |||
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 3: Tensile strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a filament strand |
| Elongation at break orientation not stated | 650 %p. 3: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a filament strand |
| Density | 1120 kg/m³p. 3: Material density | ISO 1183 | |
| Recreus, Flexible Filaflex 95 Foamy filament1 value | |||
| Hardness | 95A Shore Ap. 1: Initial Shore hardness | no standard namedAs the sheet prints it: initial; adjustable down to 70A by printing parameters | in the median |
Print settings
- Nozzle
- 248 °Cown data sheet
- Bed
- 50–55 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 1 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMY; bed in Recreus, Flexible Filaflex 95 Foamy filament.
Its 5 print profiles, in the documents' words
- Nozzle 245-255°CRecreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1: Recommended printing settings
- Nozzle 248 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 3: Recommended printing settings; p. 3: Nozzle 0.4 mm
- Nozzle 250 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 4: Recommended printing settings: Nozzle 0.8 mm
- Nozzle 252 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 4: Recommended printing settings: Nozzle 1.0 mm
- Nozzle 245-250°C; Bed No heating (room temperature); Drying 55°C, 1 hRecreus, Flexible Filaflex 95 Foamy filamentp. 1: Filament Drying Temperature; p. 1: Description foaming temperature; p. 1: Nozzle; p. 1: Bed Temperature (small parts)
Price
Not in the price sample.
Its 4 documents
What the maker says (23)
- Printing advice
Preferably use direct drive extruder
Recreus, Flexible Filaflex 95 Foamy filamentp. 1 - Printing advice
Excessive stringing 1. Increase travel speed 2. Optimize retraction 3. Reduce temperature if possible
Recreus, Flexible Filaflex 95 Foamy filamentp. 1 - Good for
Footwear: Lightweight insoles and shoe components
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 1 - Good for
Medical Devices: Custom prosthetics and orthopedic supports
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 1 - Good for
Automotive: Flexible bumpers and impact-resistant elements
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 1 - Good for
Protective Systems: Shock-absorbing and sound-damping components
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 1 - Benefits
Its optimized flow allows up to 30% faster printing and 30–40% more prints per spool.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 1 - Benefits
The foaming degree and color tone can be fine-tuned through printing parameters, delivering soft-touch, matte, and highly efficient results ideal for high-speed, lightweight applications, specially developed for 3D printing applications.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 1 - Surface finish
Superior Finish: Soft-touch, matte surface
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 1 - Benefits
Filaflex 95 Foamy contains a foaming agent that activates when heated, causing the material to expand during extrusion.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Pitfalls and limitations
Due to the foaming nature of this material, stringing will be more pronounced than with standard TPU.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
Set travel speed to maximum (200- 500mm/s) and ensure proper retraction settings to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
At 100 % flow, the line width expands by approximately 37.5 % relative to the nozzle diameter.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
As foaming increases, the material becomes lighter in color.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
Higher printing temperatures and lower flow rates enhance foaming and result in a lighter shade.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
This color variation is normal and confirms proper activation of the foaming agent.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
Flow rate can be reduced to 60% to achieve maximum weight reduction
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
Lower volumetric speed allows more time for the foaming agent to activate during extrusion
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
Reduce flow rate in 5% increments (down to 60%) · Decrease volumetric speed by 10-15% to allow more foaming time · Monitor line width consistency and material color change
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Printing advice
Aim for consistent color throughout your print to ensure uniform material properties.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 2 - Moisture sensitivity
Drying is crucial for optimal results
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 3 - Printing advice
Print multiple small parts simultaneously for better results.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 5 - Printing advice
Use maximum travel speed to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX 95 FOAMYp. 5
eSUN TPU LWStrength XY, MPa—Price, CAD/kg—Nozzle, °C210–270Bed, °C40–60Drying, °C, h55≥ 4 h
eSUN TPU LWeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, TPU-LW Technical Data Sheet5 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 24.5 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 113 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 5.4 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 48 kJ/m2p. 1: IZOD Impact Strength GB/T 1843 | GB/T 1843 | not in the median: measured on a moulded bar |
| Density | 1.12 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
| eSUN, TPU-LW Lightweight TPU Filament | Flexible Foaming TPU for 3D Printing2 valuesUnless a row says otherwise: specimen not stated | |||
| Density | 1.15 g/cm3p. 1: Density(g/cm3) (unit to be confirmed) | no standard stated | |
| Melt mass-flow rate | 5(190℃/10kg) g/10minp. 1: Melt Flow Index(g/10min) | no standard namedAs the sheet prints it: 10kg | |
Print settings
- Nozzle
- 210–270 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 210 - 270℃; Bed 40-60°CeSUN, TPU-LW Technical Data Sheetp. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: nozzle_diameter
- Nozzle 210-270℃/410-518℉; Bed 40-60℃; Drying The recommended drying conditions are 55°C for more than 4 hourseSUN, TPU-LW Lightweight TPU Filament | Flexible Foaming TPU for 3D Printingp. 1: Printing Recommendation notes: drying conditions; AMS (drying and AMS only
Price
Not in the price sample.
Its 3 documents
What the maker says (9)
- Good for
As a flexible foaming material, the printed model is soft and skin-friendly, suitable for printing as flexible wearables and COSPLAY models.
eSUN, TPU-LW Technical Data Sheetp. 1 - Good for
Model plane or ship • COSPLAY • Wear • Sporting Goods
eSUN, TPU-LW Technical Data Sheetp. 1 - Benefits
Excellent printability
eSUN, TPU-LW Technical Data Sheetp. 1 - Benefits
Free adjustment of strength and foaming rate
eSUN, TPU-LW Technical Data Sheetp. 1 - Benefits
It has good flexibility and is not easy to tear, with good resilience.
eSUN, TPU-LW Technical Data Sheetp. 1 - Benefits
The maximum foam volume ratio is 172%
eSUN, TPU-LW Technical Data Sheetp. 1 - Surface finish
Matte surface effect
eSUN, TPU-LW Technical Data Sheetp. 1 - Surface finish
The foaming during printing makes the surface of the model have a fine sandy texture, making layer lines less noticeable.
eSUN, TPU-LW Technical Data Sheetp. 1 - Adhesion between layers
Good interlayer adhesion
eSUN, TPU-LW Technical Data Sheetp. 1
Recreus FILAFLEX FOAMYStrength XY, MPa—Price, CAD/kg—Nozzle, °C248Bed, °C50–55Drying, °C, h55≥ 1 h
Recreus FILAFLEX FOAMYRecreus
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMY5 valuesUnless a row says otherwise: Filament | |||
| Hardness | 78 shore Ap. 1: Filament density (hardness row) | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); time=3 s | not in the median: measured on a filament strand |
| Hardness | 51 shore Ap. 1: Printing density 250ºC 70% Flow (hardness row) | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); flow=70%; time=3 s | not in the median: measured on a filament strand |
| Hardness | 65 shore Ap. 1: Printing density 250ºC 90% Flow (hardness row) | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); flow=90 %; time=3 s | not in the median: measured on a filament strand |
| Hardness | 61 shore Ap. 1: Printing density 250ºC 80% Flow (hardness row 1) | ISO 7619As the sheet prints it: DIN ISO 7619-1 (3s); flow=80 %; time=3 s | not in the median: measured on a filament strand |
| Density | 1.05 g/cm3 (TDS prints "1,050" with European decimal separator)p. 1: Filament density | ISO 1183 | |
| Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMY3 valuesUnless a row says otherwise: Filament | |||
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 3: Tensile strength | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a filament strand |
| Elongation at break orientation not stated | 650 %p. 3: Elongation at break | DIN 53504As the sheet prints it: DIN 53504-S2 | not in the median: measured on a filament strand |
| Density | 1120 kg/m³p. 3: Material density | ISO 1183 | |
Print settings
- Nozzle
- 248 °Cown data sheet
- Bed
- 50–55 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for ≥ 1 hown data sheet
- Hardened nozzle
- not stated
Its 4 print profiles, in the documents' words
- Nozzle 248 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 3: Recommended printing settings; p. 3: Nozzle 0.4 mm
- Nozzle 245-255°CRecreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1: Recommended printing settings
- Nozzle 250 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 4: Recommended printing settings: Nozzle 0.8 mm
- Nozzle 252 °C; Bed Small parts Room temperature (no heating); Large parts 50–55 °C; Drying 55 °C; Minimum Time 1 hourRecreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 4: Recommended printing settings: Nozzle 1.0 mm
Price
Not in the price sample.
Its 3 documents
What the maker says (23)
- Good for
Footwear Innovation: Complete shoes, insoles, and soles
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Good for
Cycling Components: Lightweight grips and seats
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Good for
Automotive Parts: Cushioning elements and gaskets
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Good for
Protection Equipment: Impact-absorbing pads and gear
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Benefits
It allows adjustable hardness (82A down to 60A), customizable density, texture, and even color tone, all through printing parameters.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Benefits
Lightweight, versatile, and durable, ideal for efficient high-volume production, specially developed for 3D printing applications.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Surface finish
Soft, Skin-Friendly Texture: Smooth, comfortable finish
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Printing advice
Dynamic Foaming: Low temps give tough parts, high temps activate foaming
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Printing advice
Color Control: Fine-tune tones through temperature settings
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 1 - Benefits
Filaflex Foamy contains a foaming agent that activates when heated, causing the material to expand during extrusion.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Pitfalls and limitations
Due to the foaming nature of this material, stringing will be more pronounced than with standard TPU.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
Set travel speed to maximum (200- 500mm/s) and ensure proper retraction settings to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
At 100 % flow, the line width expands by approximately 37.5 % relative to the nozzle diameter.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
As foaming increases, the material becomes lighter in color.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
Higher printing temperatures and lower flow rates enhance foaming and result in a lighter shade.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
This color variation is normal and confirms proper activation of the foaming agent.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
Flow rate can be reduced to 60% to achieve maximum weight reduction
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
Lower volumetric speed allows more time for the foaming agent to activate during extrusion
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
Reduce flow rate in 5% increments (down to 60%) · Decrease volumetric speed by 10-15% to allow more foaming time · Monitor line width consistency and material color change
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Printing advice
Aim for consistent color throughout your print to ensure uniform material properties.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 2 - Moisture sensitivity
Drying is crucial for optimal results
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 3 - Printing advice
Print multiple small parts simultaneously for better results.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 5 - Printing advice
Use maximum travel speed to minimize stringing.
Recreus, TECHNICAL DATA SHEET FILAFLEX FOAMYp. 5
No product matches "".
Not published by any product: tensile strength (Z), tensile modulus (XY), notched impact and heated chamber.
Values are for the colour each sheet tested; pigment can change them.