PEI-CF
Beyond H2C capability. Kept for reference, never a candidate: it needs more heat than the H2C gives.
3 products from 2 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- not published
How the numbers are worked out
3DXTECH CarbonX Carbon Fiber Ultem 9085Strength XY, MPa93Modulus XY, GPa8.6HDT 0.45, °C165Nozzle, °C365–390Bed, °C140–160Chamber, °C—Drying, °C, h1406–8 h
3DXTECH CarbonX Carbon Fiber Ultem 90853DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber Ultem™ 9085 3D Printing Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 390°C Bed Temp: 140°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 8600 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 93 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 2 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 8450 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 120 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 165 °Cp. 1: Deflection Temperature at 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 186 °Cp. 1: Glass Transition Temperature (Tg) DSC °C | DSCAs the sheet prints it: Tg DSC °C | in the median |
| Density | 1.39 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
| 3DXTECH, CARBONX™ PEI 9085+CF1 value | |||
| Fibre content | 15% high-modulus carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 365–390 °Cown data sheet
- Bed
- 140–160 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 140 °C for 6–8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber Ultem™ 9085 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
- Nozzle 365-390C; Bed 140-160C; Chamber Recommended; Drying 140°C for 6-8 hours3DXTECH, CARBONX™ PEI 9085+CFp. 1: Print Recommendations: Extruder Temp; Bed Temp; Heated Chamber; Nozzle Specs; Drying Specs
Price
Not in the price sample.
Its 3 documents
What the maker says (13)
- Benefits
Improved stiffness and strength for structural applications
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Benefits
High thermal properties, Tg of 186C and an HDT of 165C
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Benefits
Inherent flame resistance due to Ultem 9085 base resin
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Warping and shrinkage
Excellent dimensional stability – lower CTE, warp, and shrinkage vs unfilled grades
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Benefits
Resistance to a broad range of chemicals, include automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Nozzle wear
Strongly recommend this material to be printed through a hardened steel nozzle rather than a softer metal.
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Good for
This custom formulation is an excellent printing aerospace-grade material specifically formulated for our aerospace clients.
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Good for
Ultem™ 9085 is FAA-approved for FST applications (Flame/Smoke/Toxicity) and meets FAR 25.853 and OSU 65/65 standards.
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Benefits
The addition of 15% high-modulus carbon fiber allows for superior strength and stiffness while maintaining excellent dimensional stability and printability.
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Printing advice
Heated Chamber Recommended
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Nozzle wear
Nozzle Specs Hardened Steel with .4mm diameter minimum
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Printing advice
Layer Height 0.25mm or higher
3DXTECH, CARBONX™ PEI 9085+CFp. 1 - Moisture sensitivity
Drying Specs 140°C for 6-8 hours
3DXTECH, CARBONX™ PEI 9085+CFp. 1
3DXTECH CarbonX Carbon Fiber Ultem PEIStrength XY, MPa145Modulus XY, GPa7.7HDT 0.45, °C205Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
3DXTECH CarbonX Carbon Fiber Ultem PEI3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber Ultem™ PEI 3D Printing Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 385°C Bed Temp: 140°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 7700 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 145 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 1.5 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 7500 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 120 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 205 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66psi) | in the median |
| Glass transition temperature | 217 °Cp. 1: Glass Transition Temperature (Tg) DSC °C | DSCAs the sheet prints it: Tg DSC °C | in the median |
| Density | 1.31 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: CarbonX™ Carbon Fiber Ultem™ PEI 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
Price
Not in the price sample.
Its 2 documents
Nanovia PEI CF Ultem 1010Strength XY, MPa—Modulus XY, GPa4.68HDT 0.45, °C> 200Nozzle, °C370–400Bed, °C≥ 150Chamber, °C≥ 120Drying, °C, h1006 h
Nanovia PEI CF Ultem 1010Nanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PEI CF Ultem 1010 : Carbon fiber reinforced : Nanovia6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 4685 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3.5 %p. 1: Elongation at break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 4950 MPap. 1: Flexural modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 200 °Cp. 1: HDT 0.45 MPa | ISO 75As the sheet prints it: 0.45 MPa ISO75Be | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 215 °Cp. 1: VICAT A/50 | no standard namedAs the sheet prints it: 50 | |
| Density | 1,27 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 370–400 °Cown data sheet
- Bed
- at least 150 °Cown data sheet
- Heated chamber
- at least 120 °Cown data sheet
- Drying
- optional: 100 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 370 – 400 °C; Bed > 150 °C; Chamber > 120 °C; Drying Dehydrate for 6 h at 100 °C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PEI CF Ultem 1010 : Carbon fiber reinforced : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Printing
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
It’s useable temperature up to 200 °C and its UL-V0 certified non-flamability make it an ideal material for components that should not deform under stress and extreme heat.
Nanovia, Nanovia PEI CF Ultem 1010 : Carbon fiber reinforced : Nanoviap. 1 - Benefits
Improved rigidity over native PEI
Nanovia, Nanovia PEI CF Ultem 1010 : Carbon fiber reinforced : Nanoviap. 1 - Nozzle wear
A reinforced nozzle, suitable for abrasive materials is recommended.
Nanovia, Nanovia PEI CF Ultem 1010 : Carbon fiber reinforced : Nanoviap. 1
No product matches "".
Not published by any product: tensile strength (Z), notched impact, HDT at 1.8 MPa and price.
Values are for the colour each sheet tested; pigment can change them.