PCTG-GF
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- sold as toughened
- shared data sheet
- hardened nozzle
- converted price
- not published
How the numbers are worked out
Fiberlogy PCTG+GF10Strength XY, MPa55Modulus XY, GPa3.4HDT 0.45, °C76HDT 1.8, °C64Price, CAD/kg165Nozzle, °C250–270Bed, °C90–110Chamber, °CnoneDrying, °C, h604 h
Fiberlogy PCTG+GF10Fiberlogy
Sold as toughened or impact-modified: "The result is a material with increased strength, stiffness, and impact resistance" (Fiberlogy, PCTG+GF Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PCTG+GF107 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3400 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: the only value of its test, shown as published |
| Tensile yield strength orientation not stated | 55 MPap. 1: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 25 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 8 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 60 kJ/m2p. 1: Izod Impact Strength (Unnotched) @ 23°C ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23°C ISO 180 | not in the median: unnotched |
| HDT at 0.45 MPa | 76 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 64 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Fiberlogy, PCTG+GF Filament3 valuesUnless a row says otherwise: specimen not stated | |||
| Izod impact strength orientation not stated | 60 kJ/m² (ISO 180)p. 1: Izod impact strength (uncharved) @ 23°C | ISO 180As the sheet prints it: ISO 180; unnotched | not in the median: unnotched |
| Density | 1.31 g/cm³p. 1: Density | no standard stated | |
| Fibre content | 10% glass fiberp. 1: Fibre content | no standard stated | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PCTG+GF101 value | |||
| Glass transition temperature | 88 °Cp. 1: Glass Transition Temperature Tg DCS °C | no standard stated | in the median |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, PCTG+GF Filament.
Its 3 print profiles, in the documents' words
- Nozzle 250°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy PCTG+GF10p. 1: Recommended printing settings
- Nozzle 250°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy PCTG+GF10p. 1: Recommended printing settings
- Nozzle 250–270°C; Bed 100°C; Drying 60°C / 4 hoursFiberlogy, PCTG+GF Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
165 CAD/kgits one regular price in the sample
1 listing
- Texas Filament Supply: 165 CAD/kgPCTG + GF10 / Blackin its price; Texas Filament Supply (USD storefront) lists 87 USD for 0.75 kg: 116 USD/kg before VAT, × 1.4188 CAD per USD (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 4 documents
What the maker says (2)
- Benefits
it retains its key advantages: chemical resistance, low shrinkage, and ease of printing
Fiberlogy, PCTG+GF Filamentp. 1 - Benefits
The result is a material with increased strength, stiffness, and impact resistance
Fiberlogy, PCTG+GF Filamentp. 1
FormFutura AthenaX GF10Strength XY, MPa55Modulus XY, GPa—HDT 0.45, °C78HDT 1.8, °C68Price, CAD/kg—Nozzle, °C250–270Bed, °C≥ 50Chamber, °CnoneDrying, °C, h7524 h
FormFutura AthenaX GF10FormFutura
Data sheet shared with Spectrum PCTG GF10: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 250–270 °CSpectrum PCTG GF10's data sheet, shared
- Bed
- at least 50 °CSpectrum PCTG GF10's data sheet, shared
- Heated chamber
- not requiredown data sheet
- Drying
- 75 °C for 24 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Drying pre-dry the filament at 75°C for approximately 24 hours before usageFormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1: Nozzle note; p. 2: Drying
Price
Not in the price sample.
Its 2 documents
What the maker says (17)
- Good for
Making tooling, equipment, and manufacturing aids.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Good for
This makes glass fiber reinforced filaments perfect for 3D printing applications that require mechanical strength and stiffness.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Benefits
No enclosure, or heated chamber needed.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Benefits
This engineering filament is very easy to 3D print on open desktop machines.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Benefits
Your 3D printed parts will not only be stiff, strong and durable.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Benefits
They will also be resistant to wear and chemicals.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Benefits
Durable and good resistance to corrosion.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Benefits
It offers not only great electrical- and thermal insulation properties.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Warping and shrinkage
Reducing shrinkage / warping
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Warping and shrinkage
Increasing dimensional stability
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Warping and shrinkage
Its low shrinkage factor and perfect layer adhesion make AthenaX GF10 a breeze to print with.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Surface finish
Masking layer lines with a matt surface finish in 3D printed objects
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Nozzle wear
We recommend to use ruby nozzles or hardened steel nozzles.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Nozzle wear
Please be aware that glass fiber reinforced filaments contain a relatively high concentration of extremely hard glass fibers, which have an abrasive nature.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Nozzle wear
In general these glass fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 1 - Moisture sensitivity
PCTG is moderately hygroscopic and therefore it is recommended to pre-dry the filament at 75°C for approximately 24 hours before usage for optimal results.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 2 - Moisture sensitivity
For optimal print results we recommend to print AthenaX GF10 filament from a drying box to avoid that the material can accumulate humidity from the environment.
FormFutura, TECHNICAL DATA SHEET AthenaX GF10p. 2
Spectrum PCTG GF10Strength XY, MPa55Modulus XY, GPa—HDT 0.45, °C78HDT 1.8, °C68Price, CAD/kg—Nozzle, °C250–270Bed, °C≥ 50Chamber, °CnoneDrying, °C, h7524 h
Spectrum PCTG GF10Spectrum
Data sheet shared with FormFutura AthenaX GF10: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PCTG GF109 valuesThe same values also in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.Unless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 55 MPap. 1: Tensile Strength at Yield | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 25 MPap. 1: Tensile Strength at Break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 8,00 %p. 1: Elongation at Break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Impact strength, test unclear | 45 kJ/m2p. 1: Izod Impact Strenght Unnotched @ 23°C | ISO 179As the sheet prints it: 23°C ISO 179-1eU | listed under other properties |
| HDT at 0.45 MPa | 78 °Cp. 1: Heat Distortion Temperature @ 0.455MPaalso in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO | no standard namedAs the sheet prints it: 0.455MPa | in the median |
| HDT at 1.8 MPa | 68 °Cp. 1: Heat Distortion Temperature @ 1.820 MPa | no standard namedAs the sheet prints it: 1.820 MPa | in the median |
| Vicat softening temperature | 77 °Cp. 1: VICAT Softening Temperature | no standard stated | |
| Density | 1.31 g/cm3p. 1: Density | ASTM D792 | |
| Fibre content | 10% glass fibersp. 1: Fibre content | no standard stated | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| Vicat softening temperature | 89°Cp. 4: VICAT | no standard stated | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- at least 50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 75 °C for 24 hFormFutura AthenaX GF10's data sheet, shared
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 250-270°C; Bed > 50°CSpectrum, TECHNICAL DATA SHEET PCTG GF10p. 1: Recommended printing settings; p. 1: settings footnote
- No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended; p. 23: Adhesive
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 98.6 per kg, sale priceNatural GF10 - Spectrum Premium PCTG Filament - 1.75mm, 1kg (SKU 67bbc4bcd7ad3)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (7)
- Precision and tolerance
high dimensional accuracy of the printed elements
Spectrum, TECHNICAL DATA SHEET PCTG GF10p. 1 - Surface finish
high surface quality after printing
Spectrum, TECHNICAL DATA SHEET PCTG GF10p. 1 - Surface finish
In addition, the glass fibres give the prints a distinctive texture, which, in addition to its undoubted aesthetic qualities, also translates into increased usability.
Spectrum, TECHNICAL DATA SHEET PCTG GF10p. 1 - Adhesion between layers
Thanks to its extremely high interlayer adhesion and low shrinkage, it allows even intermediate users to execute large prints.
Spectrum, TECHNICAL DATA SHEET PCTG GF10p. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PCTG GF10p. 1 - Nozzle wear
Ruby or hardened nozzle recommended
Spectrum, TECHNICAL DATA SHEET PCTG GF10p. 1 - Benefits
10% Glass fiber reinforced, good corrosion and chemical resistance, high stiffness
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
No product matches "".
Not published by any product: tensile strength (Z) and notched impact.
Values are for the colour each sheet tested; pigment can change them.