PEI
also called ULTEM
Beyond H2C capability. Kept for reference, never a candidate: it needs more heat than the H2C gives.
13 products from 9 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
13 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- shared data sheet
- hardened nozzle
- not published
How the numbers are worked out
3D4Makers PEI Filament Ultem 9085Strength XY, MPa84Strength Z, MPa—Modulus XY, GPa3.44Charpy notched, kJ/m²11HDT 0.45, °C153HDT 1.8, °C153Nozzle, °C350–380Bed, °C120–160Chamber, °C—Drying, °C, h120≥ 4 h
3D4Makers PEI Filament Ultem 90853D4Makers
Data sheet shared with FormFutura PEI ULTEM 9085: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, Technical data sheet 3D printing filament PEI Filament Ultem 908515 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3440 MPap. 1: Tensile modulus 5mm/min ASTM D738 | ASTM D738As the sheet prints it: 5mm/min ASTM D738 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 84 MPap. 1: Tensile Stress Yield 5mm/min ASTM D738 | printed specimen (implied by the document), ASTM D738As the sheet prints it: 5mm/min ASTM D738 | in the median |
| Tensile break strength orientation not stated | 74 MPap. 1: Tensile Stress Break 5mm/min ASTM D738 Tensile Strain | printed specimen (implied by the document), ASTM D738As the sheet prints it: 5mm/min Tensile Strain ASTM D738 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 2920 MPap. 1: Flexural Modulus ASTM D790 | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 138 MPap. 1: Flexural Stress, yield ASTM D790 | printed specimen (implied by the document), ASTM D790 | in the median |
| Charpy impact strength | 11 kJ/m2p. 1: Notched Charpy Impact 23 °C ISO 179/2C | printed specimen (implied by the document), ISO 179As the sheet prints it: 23 °C ISO 179/2C | in the median |
| Izod impact strength | 115 J/mp. 1: Notched Izod Impact Strength 23°C ASTM D256 | printed specimen (implied by the document), ASTM D256As the sheet prints it: 23°C ASTM D256 | not in the median: in J/m |
| HDT at 1.8 MPa | 153 °Cp. 1: Heat Deflection Temperature 1.8 MPa, Unannealed, 3.2 ASTM D648 | ASTM D648As the sheet prints it: 1.8 MPa Unannealed 3.2 ASTM D648as printedUnannealed | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 173 °Cp. 2: Vicat Softening Temp Rate B/120 ISO 306 | ISO 306As the sheet prints it: 120 ISO 306 | |
| Density | 1.34 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
| Water absorption | 0.39 %p. 1: Water Absorption Saturation, 23 °C ISO 62 | ISO 62As the sheet prints it: 23 °C ISO 62 | |
| Water absorption | 0.17 %p. 1: Moisture Absorption 23 °C/ 50% RH ISO 62 | ISO 62As the sheet prints it: 23 °C/ 50% RH ISO 62 | |
| Melt mass-flow rate | 8.9 g/10 minp. 1: Melt Flow Rate (MVR) 295 °C ASTM D1238 | ASTM D1238As the sheet prints it: MVR 295 °C ASTM D1238 | |
| Melt volume-flow rate | 65 cm3/10 minp. 1: Melt Volume Rate 360 °C/5.0 kg ISO 1182 | ISO 1182As the sheet prints it: 360 °C/5.0 kg ISO 1182 | |
| Oxygen index | 49 %p. 2: Oxygen Index (LOI) ASTM D2863 | ASTM D2863 | |
| FormFutura, Technical Data Sheet PEI ULTEM 90857 valuesThe same values also in 3D4Makers, PEI Ultem 9085 Filament.Unless a row says otherwise: specimen not stated | |||
| Elongation at break orientation not stated | 72%p. 1: Tensile strain @ break (5mm/min) | ASTM D738As the sheet prints it: ASTM D738; endpoint=break; rate=5 mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 7%p. 1: Tensile strain @ yield (5mm/min) | ASTM D738As the sheet prints it: ASTM D738; endpoint=yield; rate=5 mm/min | listed under other properties |
| Charpy impact strength orientation not stated | 11 kJ/m²p. 1: Charpy notched impact strength, 23°C | ISO 179As the sheet prints it: ISO 179/2C | not in the median: another value of this product is in it |
| Izod impact strength orientation not stated | 115 J/mp. 1: Izod notched impact strength, 23°Calso in 3D4Makers, PEI Ultem 9085 Filament | ASTM D256tested at 23 °C | not in the median: in J/m |
| Izod impact strength orientation not stated | 13 kJ/m²p. 1: Izod notched impact strength, 80*10*4, 23 ºC | ISO 180As the sheet prints it: ISO 180-1A; specimen size=80*10*4 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 153°Cp. 1: Heat Deflection Temperature | ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 186°Cp. 1: Glass transition temperature | no standard stated | in the median |
Print settings
- Nozzle
- 350–380 °Cown data sheet
- Bed
- 120–160 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 120 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 350 – 380 °C; Bed 120 - 160 °C3D4Makers, Technical data sheet 3D printing filament PEI Filament Ultem 9085p. 2: Recommended printing settings
- Nozzle 350 - 380°C; Bed 120 - 160°C; Drying 120°C, minimal 4 hours3D4Makers, PEI Ultem 9085 Filamentp. 1: Printer settings: nozzle temperature; heated bed temperature; Adhesion; Drying recommendations
Price
Not in the price sample.
Its 4 documents
What the maker says (9)
- Printing advice
The 2000 gram spools are compatible with Stratasys printers.
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Benefits
This material features superior mechanical performance, flame retardancy (UL 94-VO rated) and strength-to-weight ratio.
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Moisture sensitivity
The 3D 4 MAKERS PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging.
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Good for
These properties make the 3D 4 MAKERS PEI Filament particularly suitable for usage in FDM and FFF 3D printers.
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Printing advice
Magigoo HT on glass or a PEI Sheet
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Moisture sensitivity
120°C, minimal 4 hours
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Printing advice
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations.
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Printing advice
We recommend to use a closed system.
3D4Makers, PEI Ultem 9085 Filamentp. 1 - Moisture sensitivity
When the 3D printer is not being used it is important to keep the 3D4MAKERS PEI Filament in a bag and stored in a cool, dry and dark place until it is used again.
3D4Makers, PEI Ultem 9085 Filamentp. 1
FormFutura PEI ULTEM 9085Strength XY, MPa84Strength Z, MPa—Modulus XY, GPa3.44Charpy notched, kJ/m²11HDT 0.45, °C153HDT 1.8, °C153Nozzle, °C350–380Bed, °C120–160Chamber, °C—Drying, °C, h120≥ 4 h
FormFutura PEI ULTEM 9085FormFutura
Data sheet shared with 3D4Makers PEI Filament Ultem 9085: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 350–380 °C3D4Makers PEI Filament Ultem 9085's data sheet, shared
- Bed
- 120–160 °C3D4Makers PEI Filament Ultem 9085's data sheet, shared
- Heated chamber
- not stated
- Drying
- 120 °C for ≥ 4 h3D4Makers PEI Filament Ultem 9085's data sheet, shared
- Hardened nozzle
- not stated
What the maker says (7)
- Good for
Aerospace applications
FormFutura, Technical Data Sheet PEI ULTEM 9085p. 1 - Good for
Electrical applications
FormFutura, Technical Data Sheet PEI ULTEM 9085p. 1 - Benefits
PEI ULTEM 9085 is a flame retardant 3D printing filament with low smoke evolution.
FormFutura, Technical Data Sheet PEI ULTEM 9085p. 1 - Benefits
Flame retardant with UL 94 V-0 and 5VA ratings
FormFutura, Technical Data Sheet PEI ULTEM 9085p. 1 - Benefits
Low smoke evolution and low smoke toxicity
FormFutura, Technical Data Sheet PEI ULTEM 9085p. 1 - Warping and shrinkage
It combines exceptional dimensional stability with good chemical resistance.
FormFutura, Technical Data Sheet PEI ULTEM 9085p. 1 - Adhesion between layers
The material combine excellent layer bonding, dimensional accuracy, a high impact resistance, durablitity and a high tensile strength into one filament.
FormFutura, Technical Data Sheet PEI ULTEM 9085p. 1
Fiberlogy PEI 9085Strength XY, MPa88Strength Z, MPa—Modulus XY, GPa3.05Charpy notched, kJ/m²10HDT 0.45, °C169HDT 1.8, °C152Nozzle, °C350–380Bed, °C160Chamber, °C≥ 80Drying, °C, h1206 h
Fiberlogy PEI 9085Fiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 908512 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085.Unless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3050 MPap. 1: Tensile Modulus ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 88 MPap. 1: Tensile Strength @ Yield ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 71 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 50 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 6.7 %p. 1: Elongation @ Yield ISO 527 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085 | specimen not stated, ISO 527 | listed under other properties |
| Flexural modulus orientation not stated | 2750 MPap. 1: Flexural Modulus ISO 178 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085 | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 90 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 13 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23°C ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| Impact strength, test unclear | 11 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 180 kJ/m2 | specimen not stated, ISO 180As the sheet prints it: 23°C ISO 180 | listed under other properties |
| HDT at 1.8 MPa | 152 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085 | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 173 °Cp. 1: Vicat Softening Temperature ISO 306 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085 | specimen not stated, ISO 306 | |
| Density | 1.34 g/cm³p. 1: Specific Density | specimen not stated, ISO 1183 | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 90855 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Elongation at break orientation not stated | 70 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 129 MPap. 1: Flexular Strength ISO 178 MPa | ISO 178 | not in the median: another value of this product is in it |
| Charpy impact strength | 10 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 10 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23°C ISO 180 | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 169 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Fiberlogy, PEI 9085 Filament2 valuesUnless a row says otherwise: specimen not statedtested at 23 °Cnotched | |||
| Charpy impact strength orientation not stated | 10 kJ/m²p. 1: Charpy impact strength (notched) @ 23°C | ISO 179 | not in the median: another value of this product is in it |
| Izod impact strength orientation not stated | 10 kJ/m²p. 1: Izod impact strength (notched) @ 23°C | ISO 180 | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 350–380 °Cown data sheet
- Bed
- 160 °Cown data sheet
- Heated chamber
- at least 80 °Cown data sheet
- Drying
- 120 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 350°C - 380°C; Bed 160°C; Chamber >80°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085p. 1: Recommended printing settings
- Nozzle 350°C - 380°C; Bed 160°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy PEI 9085p. 1: Recommended printing settings
- Nozzle 350–380°C; Bed 160°C; Chamber >80°C; Drying 120°C / 6 hoursFiberlogy, PEI 9085 Filamentp. 1: Printing Parameters
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Good for
This material has been used for years in the most demanding industries, such as aerospace, automotive, rail transportation, and space exploration.
Fiberlogy, PEI 9085 Filamentp. 1
3DXTECH ThermaX PEIStrength XY, MPa54Strength Z, MPa—Modulus XY, GPa2.05Charpy notched, kJ/m²—HDT 0.45, °C158HDT 1.8, °C—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h1304–6 h
3DXTECH ThermaX PEI3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: ThermaX™ PEI [Made using ULTEM™ 9085]8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 365-385°C Bed Temp: 130-140°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 2050 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 54 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 3 %p. 1: Tensile Elongation ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 2170 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 90 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 158 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66psi) | in the median |
| Glass transition temperature | 186 °Cp. 1: Glass Transition Temperature DSC °C | DSCAs the sheet prints it: DSC Tg | in the median |
| Density | 1.34 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- 130 °C for 4–6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: ThermaX™ PEI [Made using ULTEM™ 9085]p. 1: Printed Specimen Conditions, which are not printing guidance
- Drying 130°C for 4-6 hours3DXTECH, Filament Drying Instructions | 3DXTECHp. 1: drying
Price
Not in the price sample.
Its 3 documents
3DXTECH THERMAX PEI 1010Strength XY, MPa56Strength Z, MPa—Modulus XY, GPa2.5Charpy notched, kJ/m²—HDT 0.45, °C208HDT 1.8, °C—Nozzle, °C370–390Bed, °C120–160Chamber, °C—Drying, °C, h1504 h
3DXTECH THERMAX PEI 10103DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, THERMAX PEI 10108 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 380-400°C Bed Temp: 130-140°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 2500 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 56 MPap. 1: Tensile Strength | ISO 527 | in the median |
| Elongation at break XY | 3 %p. 1: Tensile Elongation | ISO 527 | in the median |
| Flexural modulus XY | 2510 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 110 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 208 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: 0.45 ISO 75 | in the median |
| Glass transition temperature | 217 °Cp. 1: Glass Transition Temperature | DSC | in the median |
| Density | 1.27 g/ccp. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 370–390 °Cown data sheet
- Bed
- 120–160 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 150 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, THERMAX PEI 1010p. 1: Printed Specimen Conditions, which are not printing guidance
- Nozzle 370-390C; Bed 120-160C; Chamber Recommended; Drying 150C for 4 hours3DXTECH, THERMAX™ PEI 1010Print Recommendations
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 308 per kg, sale priceNatural - 1.75mm 3DXTech ThermaX™ PEI Using Ultem 1010 Filament - 0.5 kg / Default Titlenot used: no regular price per kilogram recorded; seen 10 Sep 2026
Its 4 documents
What the maker says (13)
- Benefits
Long-term hydrolytic stability
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
High thermal properties, with a Tg of 217C
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
Inherently flame-resistant
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
Excellent dimensional stability, low heat creep sensitivity, and a very low, uniform coefficient of thermal expansion create highly reproducible part-to-part dimensions
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
Exceptional strength and modulus, even at elevated temperatures
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
Good resistance to a broad range of chemicals, include automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
PEI is an amorphous, high-performance polymer that combines excellent mechanical, thermal, and chemical resistance properties.
3DXTECH, THERMAX™ PEI 1010p. 1 - Benefits
Our PEI based filaments offer the ability to create parts with excellent properties at elevated temperatures due to a very high glass transition temperature (Tg).
3DXTECH, THERMAX™ PEI 1010p. 1 - Good for
Ideal for use in critical applications which require electrostatic discharge (ESD) protection, a high level of cleanliness, and the outstanding thermal and chemical properties you’ve come to expect with PEI based compounds.
3DXTECH, THERMAX™ PEI 1010p. 1 - Printing advice
Heated Chamber Recommended
3DXTECH, THERMAX™ PEI 1010p. 1 - Nozzle wear
Nozzle Specs No special concerns
3DXTECH, THERMAX™ PEI 1010p. 1 - Moisture sensitivity
Drying Specs 150C for 4 hours
3DXTECH, THERMAX™ PEI 1010p. 1
3DXTECH Ultem 1010 Model MaterialStrength XY, MPa56Strength Z, MPa—Modulus XY, GPa2.5Charpy notched, kJ/m²—HDT 0.45, °C208HDT 1.8, °C—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
3DXTECH Ultem 1010 Model Material3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DXTECH, Technical Data Sheet: Ultem® 1010 Model Material8 values | |||
| Tensile modulus XY | 2500 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 56 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 3 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 2500 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 111 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 208 °Cp. 1: Deflection Temperature at 0.45 MPa (66psi) | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| Glass transition temperature | 217 °Cp. 1: Glass Transition Temperature (Tg) | DSC | in the median |
| Density | 1.27 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183 | |
Print settings
No print settings on file for this product.
3DXTECH Ultem 9085 Model MaterialStrength XY, MPa55Strength Z, MPa—Modulus XY, GPa2.2Charpy notched, kJ/m²—HDT 0.45, °C158HDT 1.8, °C—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
3DXTECH Ultem 9085 Model Material3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DXTECH, Technical Data Sheet: Ultem® 9085 Model Material8 values | |||
| Tensile modulus XY | 2200 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 55 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 3 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 2170 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 91 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 158 °Cp. 1: Deflection Temperature at 0.45 MPa (66psi) | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| Glass transition temperature | 186 °Cp. 1: Glass Transition Temperature DSC °C | no standard stated | in the median |
| Density | 1.34 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183 | |
Print settings
No print settings on file for this product.
Prusa Research Prusament PEI 1010 by Prusa PolymersStrength XY, MPa95Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²—HDT 0.45, °C207HDT 1.8, °C194Nozzle, °C400–420Bed, °C140–160Chamber, °C90Drying, °C, h1506–8 h
Prusa Research Prusament PEI 1010 by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PEI 1010 by Prusa Polymers22 values | |||
| Tensile modulus XY | 2.3 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 2.1 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 95 ± 3.5 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength orientation not stated | 111.5 ± 1.4 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 72 ± 5 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 6.6 ± 0.7 %p. 2: Elongation at Yield Point [%] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 4.8 ± 0.6 %p. 2: Elongation at Yield Point [%] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 2.3 ± 0.1 GPap. 2: Flexural Modulus [GPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural modulus XZ | 2.7 ± 0.3 GPap. 2: Flexural Modulus [GPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 98 ± 6.5 MPap. 2: Flexural Strength [MPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 138 ± 5.3 MPap. 2: Flexural Strength [MPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 19.7 ± 4.3 kJ/m²p. 2: Impact Strength Charpy [kJ/m2](4) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1 | not in the median: unnotched |
| Charpy impact strength XZ | 39 ± 10 kJ/m²p. 2: Impact Strength Charpy [kJ/m2](4) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1 | not in the median: unnotched |
| Hardness | 83.5 Shore Dp. 2: Hardness – Shore D | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 13.97 ± 1.47 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 207 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 194 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.27 g/cm3p. 2: Density [g/cm] | ISO 1183 | |
| Water absorption | 0.4 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=22 % | |
| Water absorption | 0.7 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=7 days; humidity=22 % | |
| Melt mass-flow rate | 17 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 5 kg | |
| Melt volume-flow rate | 13 cm3/10 minp. 2: MVR [cm3/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 5 kg | |
Print settings
- Nozzle
- 400–420 °Cown data sheet
- Bed
- 140–160 °Cown data sheet
- Heated chamber
- 90 °Cown data sheet
- Drying
- 150 °C for 6–8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle [°C] 410 ± 10; Bed [°C] 140–160; Chamber [°C] 90; Drying Drying at 150°C for 6-8 hoursPrusa Research, Technical datasheet Prusament PEI 1010 by Prusa Polymersp. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Moisture sensitivity
It is recommended that the filament be kept dry for the best results.
Prusa Research, Technical datasheet Prusament PEI 1010 by Prusa Polymersp. 1
Nanovia PEI Ultem 1010Strength XY, MPa105Strength Z, MPa—Modulus XY, GPa3.2Charpy notched, kJ/m²5IzodHDT 0.45, °C200HDT 1.8, °C—Nozzle, °C370–390Bed, °C120–160Chamber, °C≥ 120Drying, °C, h1006 h
Nanovia PEI Ultem 1010Nanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PEI Ultem 1010 : High thermal resistance : Nanovia10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3200 MPap. 1: Young modulus (Mechanical properties / Tensile) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 105 MPap. 1: Ultimate strength (Mechanical properties / Tensile) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 60 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3300 MPap. 1: Young modulus (Mechanical properties / Flexural) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 160 MPap. 1: Ultimate strength (Mechanical properties / Flexural) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | 5 kJ/m 2 kJ/m²p. 1: Izod (notched) | ISO 180As the sheet prints it: ISO 180/1A | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 200 °Cp. 1: HDT B (0,45 MPa) | ISO 75As the sheet prints it: ISO 75/Be; 0,45 MPa; method=B | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.27 g/cm3p. 1: Density | ISO 1183 | |
| Water absorption | 1.25 %p. 1: Water absorption (24h) | ISO 62As the sheet prints it: ISO 62; time=24 h | |
| Dielectric strength | 33 kV/mm (oil, 0.8 mm)p. 1: Dielectric strength | IEC 60243As the sheet prints it: IEC 60243-1; medium=oil; thickness=0.8 mm | |
Print settings
- Nozzle
- 370–390 °Cown data sheet
- Bed
- 120–160 °Cown data sheet
- Heated chamber
- at least 120 °Cown data sheet
- Drying
- optional: 100 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 370 – 390 °C; Bed 120 – 160 °C; Chamber > 120 °C; Drying Dehydrate for 6 h at 100 °C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PEI Ultem 1010 : High thermal resistance : Nanoviap. 1: Extrusion temperature, Plate temperature; p. 1: Enclosure temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
Nanovia PEI is resistant to autoclave operation, sterilisation cycles, and adapted for tooling able to resist high temperatures.
Nanovia, Nanovia PEI Ultem 1010 : High thermal resistance : Nanoviap. 1 - Good for
Ideal for the creations of tools that need to undergo and withstand the high temperatures of autoclave, as well as gamma ray sterilisation, for medical use.
Nanovia, Nanovia PEI Ultem 1010 : High thermal resistance : Nanoviap. 1 - Good for
Perfectly suited for industrial applications in high temperature environments and composite tooling.
Nanovia, Nanovia PEI Ultem 1010 : High thermal resistance : Nanoviap. 1 - Benefits
The Nanovia PEI filament, based on Ultem 1010 plastics, allows for high heat resistance and thermal stability.
Nanovia, Nanovia PEI Ultem 1010 : High thermal resistance : Nanoviap. 1 - Benefits
Nanovia PEI 3D printer filament, Ultem1010 based, is solvent, chemical and shock resistant.
Nanovia, Nanovia PEI Ultem 1010 : High thermal resistance : Nanoviap. 1
iSANMATE PEI 9085Strength XY, MPa62Strength Z, MPa—Modulus XY, GPa2.18Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C175Nozzle, °C360–390Bed, °C130–150Chamber, °C90–150Drying, °C, h—
iSANMATE PEI 9085iSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PEI 908522 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 2176 MPap. 1: Tensile modulus | ASTM D638 | in the median |
| Tensile modulus XZ | 2555 MPap. 1: Tensile modulus | ASTM D638 | not in the median: measured on a bar in another orientation |
| Tensile modulus ZX | 2439 MPap. 1: Tensile modulus | ASTM D638 | not in the median: measured on a bar in another orientation |
| Tensile break strength XY | 62 MPap. 1: Tensile break strength | ASTM D638As the sheet prints it: ASTM D638; Type I; 5 mm/min | in the median |
| Tensile break strength XZ | 80 MPap. 1: Tensile break strength | ASTM D638As the sheet prints it: ASTM D638; Type I; 5 mm/min | not in the median: measured on a bar in another orientation |
| Tensile break strength ZX | 45 MPap. 1: Tensile break strength | ASTM D638As the sheet prints it: ASTM D638; Type I; 5 mm/min | not in the median: measured on a bar in another orientation |
| Elongation at break XY | 5.1 %p. 1: Elongation at break | ASTM D638As the sheet prints it: ASTM D638; Type I; 5 mm/min | in the median |
| Elongation at break XZ | 5.8 %p. 1: Elongation at break | ASTM D638As the sheet prints it: ASTM D638; Type I; 5 mm/min | not in the median: measured on a bar in another orientation |
| Elongation at break ZX | 2.3 %p. 1: Elongation at break | ASTM D638As the sheet prints it: ASTM D638; Type I; 5 mm/min | not in the median: measured on a bar in another orientation |
| Flexural modulus XY | 2126 MPap. 1: Flexural modulus | ASTM D790As the sheet prints it: ASTM D790; 1.3 mm/min | in the median |
| Flexural modulus XZ | 2550 MPap. 1: Flexural modulus | ASTM D790As the sheet prints it: ASTM D790; 1.3 mm/min | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 2070 MPap. 1: Flexural modulus | ASTM D790As the sheet prints it: ASTM D790; 1.3 mm/min | not in the median: measured on a bar in another orientation |
| Izod impact strength XY | 104 J/mp. 1: Izod strength notched | ASTM D256tested at 23°C | not in the median: in J/m |
| Izod impact strength XY | 763 J/mp. 2: Izod strength unnotched | ASTM D256tested at 23°C | not in the median: in J/m |
| Izod impact strength XZ | 100 J/mp. 1: Izod strength notched | ASTM D256tested at 23°C | not in the median: in J/m |
| Izod impact strength ZX | 33 J/mp. 1: Izod strength notched | ASTM D256tested at 23°C | not in the median: in J/m |
| Izod impact strength XZ | 1003 J/mp. 2: Izod strength unnotched | ASTM D256tested at 23°C | not in the median: in J/m |
| Izod impact strength ZX | 131 J/mp. 2: Izod strength unnotched | ASTM D256tested at 23°C | not in the median: in J/m |
| HDT XY, at 1.8 MPa | 175 °Cp. 2: HDT | printed specimen (implied by the document), ASTM D648As the sheet prints it: ASTM D648; 1.82 MPa; 3.2 mm; unannealedas printedUnannealed | in the median |
| HDT XZ, at 1.8 MPa | 175 °Cp. 2: HDT | printed specimen (implied by the document), ASTM D648As the sheet prints it: ASTM D648; 1.82 MPa; 3.2 mm; unannealedas printedUnannealed | not in the median: measured on a bar in another orientation |
| HDT ZX, at 1.8 MPa | 165 °Cp. 2: HDT | printed specimen (implied by the document), ASTM D648As the sheet prints it: ASTM D648; 1.82 MPa; 3.2 mm; unannealedas printedUnannealed | not in the median: measured on a bar in another orientation |
| Density | 1.275 g/cm³p. 2: Density | specimen not stated, ASTM D792 | |
Print settings
- Nozzle
- 360–390 °Cown data sheet
- Bed
- 130–150 °Cown data sheet
- Heated chamber
- 90–150 °Cown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 360 -390 ºC; Bed 130 -150 ºC; Chamber 90- 150 °CiSANMATE, PEI 9085Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
PEI 9085 has a translucent colour of amber and it is widely used in application such as medical, electrical/electronic, automotive, and aerospace industries.
iSANMATE, PEI 9085p. 1 - Benefits
PEI 9085 is a high-performance material that have excellent thermal properties, exceptional dimensional stability, good chemical resistance, and inherent flame retardancy.
iSANMATE, PEI 9085p. 1
3D4Makers PEI Filament Ultem 1010Strength XY, MPa105Strength Z, MPa—Modulus XY, GPa3.2Charpy notched, kJ/m²5IzodHDT 0.45, °C—HDT 1.8, °C—Nozzle, °C340–360Bed, °C120Chamber, °C—Drying, °C, h120≥ 4 h
3D4Makers PEI Filament Ultem 10103D4Makers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, Technical data sheet 3D printing filament PEI Filament Ultem 101019 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3200 MPap. 1: Tensile modulus ISO 572-2/1 | specimen not stated; its document points to a moulded or resin bar, ISO 572As the sheet prints it: ISO 572-2/1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 105 MPap. 1: Tensile Stress ISO 527-2/50 Yield | specimen not stated; its document points to a moulded or resin bar, no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 85.0 MPap. 1: Tensile Stress ISO 527-2/50 Break | specimen not stated; its document points to a moulded or resin bar, no standard stated | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 3300 MPap. 1: Flexural Modulus ISO 178 | specimen not stated; its document points to a moulded or resin bar, ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 160 MPap. 1: Flexural Stress ISO 178 | specimen not stated; its document points to a moulded or resin bar, ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 5.0 kJ/m2p. 1: Notched Izod Impact Strength 23°C ISO 180/1A | specimen not stated; its document points to a moulded or resin bar, ISO 180As the sheet prints it: 23°C ISO 180/1A | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 215 °Cp. 2: Vicat Softening Temperature ISO 306/A50 | ISO 306As the sheet prints it: ISO 306/A50 | |
| Vicat softening temperature | 211 °Cp. 2: Vicat Softening Temperature ISO 306/B50 | ISO 306As the sheet prints it: ISO 306/B50 | |
| Vicat softening temperature | 212 °Cp. 2: Vicat Softening Temperature ISO 306/B120 | ISO 306As the sheet prints it: ISO 306/B120 | |
| Vicat softening temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Vicat Softening Temperature Ball Pressure Test | IEC 60695As the sheet prints it: IEC 60695-10-2 | |
| Vicat softening temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Vicat Softening Temperature RTI Elec UL 746 | no standard namedAs the sheet prints it: UL 746 | |
| Vicat softening temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Vicat Softening Temperature RTI Imp UL 746 | no standard namedAs the sheet prints it: UL 746 | |
| Vicat softening temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Vicat Softening Temperature RTI Str UL 746 ELECTRICAL | no standard namedAs the sheet prints it: UL 746 | |
| Density | 1.27 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
| Mould shrinkage orientation not stated | 0.70 %p. 1: Molding Shrinkage-Flow Internal Method 0.50 to | no standard namedAs the sheet prints it: 0.50 to | |
| Dielectric strength | 33 kV/mmp. 2: Electric Strength, 0.800 mm, in Oil | IEC 60243As the sheet prints it: IEC 60243-1; thickness=0.800 mm; medium=Oil | |
| Dielectric strength | 25 kV/mmp. 2: Electric Strength, 1.60 mm, in Oil | IEC 60243As the sheet prints it: IEC 60243-1; thickness=1.60 mm; medium=Oil | |
| Dielectric strength | 16 kV/mmp. 2: Electric Strength, 3.20 mm, in Oil | IEC 60243As the sheet prints it: IEC 60243-1; thickness=3.20 mm; medium=Oil | |
| Oxygen index | 47 %p. 3: Oxygen Index ISO 4589-2 | ISO 4589As the sheet prints it: ISO 4589-2 | |
| 3D4Makers, PEI Ultem 1010 Filament1 value | |||
| Izod impact strength orientation not stated | 5.0 Kj/m²p. 1: Impact strength Notched Izod | ISO 180 | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 340–360 °Cown data sheet
- Bed
- 120 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 120 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in 3D4Makers, PEI Ultem 1010 Filament; bed in 3D4Makers, PEI Ultem 1010 Filament.
Its 2 print profiles, in the documents' words
- Nozzle 340 – 360 °C; Bed 120 °C3D4Makers, Technical data sheet 3D printing filament PEI Filament Ultem 1010p. 3: Recommended printing settings
- Nozzle 360 - 400°C; Bed 120 - 160°C; Drying 120°C, minimal 4 hours3D4Makers, PEI Ultem 1010 Filamentp. 1: Printer settings: nozzle temperature; heated bed temperature; Adhesion; Drying recommendations
Price
Not in the price sample.
Its 3 documents
What the maker says (11)
- Adhesion between layers
The material has an excellent adhesion between layers
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Benefits
Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Benefits
This inherently flame retardant plastic has UL94 V0 and 5VA ratings.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Moisture sensitivity
The 3D 4 MAKERS PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Good for
These properties make the 3D 4 MAKERS PEI Filament particularly suitable for usage in FDM and FFF 3D printers.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Adhesion between layers
The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Moisture sensitivity
Drying recommendations 120°C, minimal 4 hours
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Printing advice
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Printing advice
Keep the 3D printer out of the sun.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Odour and emissions
This cannot be a room where people sleep.
3D4Makers, PEI Ultem 1010 Filamentp. 1 - Moisture sensitivity
When the 3D printer is not being used it is important to keep the 3D4MAKERS PEI Filament in a bag and stored in a cool, dry and dark place until it is used again.
3D4Makers, PEI Ultem 1010 Filamentp. 1
Stratasys ULTEMStrength XY, MPa—Strength Z, MPa35.3Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C217HDT 1.8, °C215Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
Stratasys ULTEMStratasys
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Stratasys, MATERIAL DATA SHEET ULTEM™49 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus Z (ZX) | 3.00 (0.45) GPap. 7: Modulus (Elastic) (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T14; layer_height=0.25 mm | in the median |
| Tensile modulus Z (ZX) | 2.64 (0.13) GPap. 8: Modulus (Elastic) (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: another value of this product is in it |
| Tensile modulus XZ | 3.04 (0.18) GPap. 7: Modulus (Elastic) (XZ) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: measured on a bar in another orientation |
| Tensile modulus XZ | 2.92 (0.048) GPap. 8: Modulus (Elastic) (XZ) | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: measured on a bar in another orientation |
| Tensile yield strength Z (ZX) | 35.3 (6.4) MPap. 8: Yield Strength (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | in the median |
| Tensile yield strength XZ | 92.8 (4) MPap. 8: Yield Strength (XZ) | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: measured on a bar in another orientation |
| Tensile break strength Z (ZX) | 28.2 (8.8) MPap. 7: Strength @ Break (ZX; ASTM D638) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: another value of this product is in it |
| Tensile break strength Z (ZX) | 36.7 (6.9) MPap. 8: Strength @ Break (ZX; ASTM D638) | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: another value of this product is in it |
| Tensile break strength XZ | 79.2 (4.9) MPap. 7: Strength @ Break (XZ; ASTM D638) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: measured on a bar in another orientation |
| Tensile break strength XZ | 91.6 (4.6) MPap. 8: Strength @ Break (XZ; ASTM D638) | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: measured on a bar in another orientation |
| Elongation at break Z | 1.1 (0.45) %p. 7: Elongation @ Break | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T14; layer_height=0.25 mm | in the median |
| Elongation at break Z | 1.5 (0.32) %p. 8: Elongation @ Break | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: another value of this product is in it |
| Elongation at break XZ | 4.0 %p. 7: Elongation @ Break % | ASTM D638print settingsTable 4: ULTEM™ 1010 Resin Mechanical Properties - F900 - T14 Tip · 0.25 mm (0.010 in.) Layer Height | not in the median: measured on a bar in another orientation |
| Elongation at break XZ | 4.1 %p. 8: Elongation @ Break % | ASTM D638print settingsTable 5: ULTEM™ 1010 Resin Mechanical Properties - F3300 - N500 Hot End · 0.25 mm (0.010 in.) Layer Height | not in the median: measured on a bar in another orientation |
| Elongation at yield Z | 1.4 (0.29) %p. 8: Elongation @ Yield | ASTM D638As the sheet prints it: ASTM D638; printer=F3300; hot_end=N500; layer_height=0.25 mm | listed under other properties |
| Elongation at yield XZ | 4.2 %p. 8: Elongation @ Yield % | ASTM D638print settingsTable 5: ULTEM™ 1010 Resin Mechanical Properties - F3300 - N500 Hot End · 0.25 mm (0.010 in.) Layer Height | listed under other properties |
| Flexural modulus XZ | 2.91 (0.049) MPaphysically implausiblep. 7: Modulus (XZ) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: physically implausible as published |
| Flexural modulus ZX | 2.64 (0.13) MPaphysically implausiblep. 7: Modulus (ZX) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: physically implausible as published |
| Flexural modulus XZ | 3.26 (0.056) GPap. 8: Modulus (XZ) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 2.33 (0.3) GPap. 8: Modulus (ZX) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F3300; hot_end=N500; layer_height=0.25 mm | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 81.6 (13) MPap. 7: Strength @ Break (ZX; ASTM D790, Procedure A) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T14; layer_height=0.25 mm; endpoint=break | not in the median: measured on a bar in another orientation |
| Flexural strength XZ | 144 (2.2) MPap. 8: Strength @ Break (XZ; ASTM D790, Procedure A) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F3300; hot_end=N500; layer_height=0.25 mm; endpoint=break | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 71.5 (12) MPap. 8: Strength @ Break (ZX; ASTM D790, Procedure A) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F3300; hot_end=N500; layer_height=0.25 mm; endpoint=break | not in the median: measured on a bar in another orientation |
| Flexural elongation at break ZX | 3.19 (0.53) %p. 7: Strain @ Break | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T14; layer_height=0.25 mm | listed under other properties |
| Flexural elongation at break ZX | 2.9 (0.71) %p. 8: Strain @ Break | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F3300; hot_end=N500; layer_height=0.25 mm | listed under other properties |
| Flexural stress at conventional deflection XZ | 128 (1.8) MPap. 7: Strength @ 5% Strain | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T14; layer_height=0.25 mm; strain=5% | listed under other properties |
| Izod impact strength XZ | 26.6 (3.5) J/mp. 7: Notched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: in J/m |
| Izod impact strength ZX | 21.7 (4.7) J/mp. 7: Notched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: in J/m |
| Izod impact strength XZ | 260 (57) J/mp. 7: Unnotched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: in J/m |
| Izod impact strength ZX | 68.0 (29.8) J/mp. 7: Unnotched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T14; layer_height=0.25 mm | not in the median: in J/m |
| Izod impact strength XZ | 36.3 (4.8) J/mp. 8: Notched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; sample thickness=0.125 in | not in the median: in J/m |
| Izod impact strength ZX | 27.2 (2.4) J/mp. 8: Notched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; sample thickness=0.125 in | not in the median: in J/m |
| Izod impact strength XZ | 406 (65) J/mp. 8: Unnotched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; sample thickness=0.125 in | not in the median: in J/m |
| Izod impact strength ZX | 116 (41) J/mp. 8: Unnotched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; sample thickness=0.125 in | not in the median: in J/m |
| Compression strength XZ | 245 (50) MPap. 7: Yield Strength (XZ) | ASTM D695As the sheet prints it: ASTM D695; printer=F900; tip=T14; layer_height=0.25 mm; endpoint=yield | |
| Compression strength ZX | 438 (31) MPap. 7: Yield Strength (ZX) | ASTM D695As the sheet prints it: ASTM D695; printer=F900; tip=T14; layer_height=0.25 mm; endpoint=yield | |
| Compression strength XZ | 77.7 (3.3) MPap. 8: 0.2% Offset Yield (XZ) | ASTM D695As the sheet prints it: ASTM D695; printer=F3300; hot_end=N500; layer_height=0.25 mm; endpoint=0.2% offset yield | |
| Compression strength ZX | 88.1 (2) MPap. 8: 0.2% Offset Yield (ZX) | ASTM D695As the sheet prints it: ASTM D695; printer=F3300; hot_end=N500; layer_height=0.25 mm; endpoint=0.2% offset yield | |
| Compression strength XZ | 104 (3.5) MPap. 8: 1.0% Offset Yield (XZ) | ASTM D695As the sheet prints it: ASTM D695; printer=F3300; hot_end=N500; layer_height=0.25 mm; endpoint=1.0% offset yield | |
| Compression strength ZX | 120 (2) MPap. 8: 1.0% Offset Yield (ZX) | ASTM D695As the sheet prints it: ASTM D695; printer=F3300; hot_end=N500; layer_height=0.25 mm; endpoint=1.0% offset yield | |
| HDT XY, at 0.45 MPa | 216.88 °Cp. 5: HDT @ 66 psi | ASTM D648As the sheet prints it: 66 psi ASTM D648print settingsTable 3: ULTEM™ 1010 Resin Physical Properties · Property Test Method · XY column | in the median |
| HDT XY, at 1.8 MPa | 215.12 °Cp. 5: HDT @ 264 psi | ASTM D648As the sheet prints it: 264 psi ASTM D648print settingsTable 3: ULTEM™ 1010 Resin Physical Properties · Property Test Method · XY column | in the median |
| HDT XZ, at 0.45 MPa | 217.12 °C (422.82 °F) | ASTM D648As the sheet prints it: ASTM D648 Method B; 66 psi | not in the median: measured on a bar in another orientation |
| HDT XZ, at 1.8 MPa | 214.51 °C (418.12 °F) | ASTM D648As the sheet prints it: ASTM D648 Method B; 264 psi | not in the median: measured on a bar in another orientation |
| Glass transition temperature | 209.37 °C (408.87 °F)p. 5: Tg | moulded bar (resin supplier's value), ASTM D7426As the sheet prints it: ASTM D7426 Inflection Point | not in the median: the resin supplier's value, not a printed part |
| Relative permittivity XY | 2.841p. 5: Dielectric Constant (XY; Table 3: ULTEM™ 1010 Resin Physical Properties / Physical Properties - Printed / XY; 2.841) | ASTM D150As the sheet prints it: ASTM D150; frequency=1 kHz | |
| Relative permittivity XY | 3.089p. 5: Dielectric Constant (XY; Table 3: ULTEM™ 1010 Resin Physical Properties / Physical Properties - Printed / XY; 3.089) | ASTM D150As the sheet prints it: ASTM D150; frequency=2 MHz | |
| Relative permittivity XZ | 2.888p. 5: Dielectric Constant (XZ; Table 3: ULTEM™ 1010 Resin Physical Properties / Physical Properties - Printed / XZ; 2.888) | ASTM D150As the sheet prints it: ASTM D150; frequency=1 kHz | |
| Relative permittivity XZ | 3.156p. 5: Dielectric Constant (XZ; Table 3: ULTEM™ 1010 Resin Physical Properties / Physical Properties - Printed / XZ; 3.156) | ASTM D150As the sheet prints it: ASTM D150; frequency=2 MHz | |
Print settings
No print settings on file for this product.
What the maker says (2)
- Good for
Its high heat resistance makes it autoclave-capable for applications involving sterilization and composite lay-up tooling.
Stratasys, MATERIAL DATA SHEET ULTEM™p. 2 - Supports and removal
ULTEM™ 1010 resin is used with breakaway support material
Stratasys, MATERIAL DATA SHEET ULTEM™p. 2
LEHVOSS LUVOCOM 3F PEI 50236 GYStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Nozzle, °C400–450Bed, °C≥ 120Chamber, °C—Drying, °C, h—
LEHVOSS LUVOCOM 3F PEI 50236 GYLEHVOSS
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, PRELIMINARY DATASHEET LUVOCOM 3F PEI 50236 GY10 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus orientation not stated | 3,5 GPap. 1: Modulus of elasticity dry, @1 mm/min ISO 527 MPTS ISO 3167 A GPa | ISO 527, ISO 3167As the sheet prints it: 1 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) orientation not stated | 105 MPap. 1: Tensile strength dry, @50 mm/min ISO 527 MPTS ISO 3167 A MPa | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 5 %p. 1: Elongation at break dry, @50 mm/min ISO 527 MPTS ISO 3167 A % | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strain at strength orientation not stated | 4,5 %p. 1: Elongation at maximum force dry, @50 mm/min ISO 527 MPTS ISO 3167 A % | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | listed under other properties |
| HDT at 1.8 MPa | 200 °Cp. 1: Heat distortion temperature HDT A ISO 75 molded sample °C | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Melting temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Melt temperature °C | specimen not stated, no standard stated | |
| Continuous service temperature | 170 °Cp. 1: Continuous service temperature 20.000 h IEC 60216 MPTS ISO 3167 A °C | IEC 60216, ISO 3167As the sheet prints it: 20.000 h MPTS A IEC 60216 ISO 3167 | |
| Density | 1,38 g/cm³p. 1: Specific gravity ISO 1183-3 g/cm³ | specimen not stated, ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0,3 %p. 1: Water absorption 23°C / 24h ISO 62 MPTS ISO 3167 A % | ISO 62, ISO 3167As the sheet prints it: 23°C / 24h MPTS A ISO 62 ISO 3167 | |
| Surface resistivity | 10¹² Ωp. 1: Surface resistance ROB DIN IEC 60093 Ronde 60x4mm Ω | specimen not stated, IEC 60093As the sheet prints it: 60x4mm IEC 60093 | |
Print settings
- Nozzle
- 400–450 °Cown data sheet
- Bed
- at least 120 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 400 - 450 °C; Bed > 120 °C3D4Makers, PRELIMINARY DATASHEET LUVOCOM 3F PEI 50236 GYp. 2: Recommended printing settings; p. 2: Processing: nozzle material
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Precision and tolerance
High dimensionally stable precision parts.
3D4Makers, PRELIMINARY DATASHEET LUVOCOM 3F PEI 50236 GYp. 1 - Moisture sensitivity
During processing the moisture level should not exceed 0.03%, otherwise porosity and surface defects (e.g. smearing) may occur.
3D4Makers, PRELIMINARY DATASHEET LUVOCOM 3F PEI 50236 GYp. 2 - Moisture sensitivity
Predrying is recommended even when sealed original containers are being used.
3D4Makers, PRELIMINARY DATASHEET LUVOCOM 3F PEI 50236 GYp. 2 - Nozzle wear
nozzle material: abrasion resistant
3D4Makers, PRELIMINARY DATASHEET LUVOCOM 3F PEI 50236 GYp. 2
No product matches "".
Not published by any product: price.
Values are for the colour each sheet tested; pigment can change them.