PEKK

Beyond H2C capability. Kept for reference, never a candidate: it needs more heat than the H2C gives.

6 products from 5 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
hardened nozzle
not published

How the numbers are worked out

3DXTECH Thermax PEKK AStrength XY, MPa105Strength Z, MPa—Modulus XY, GPa2.75HDT 0.45, °C150HDT 1.8, °C—Nozzle, °C345–375Bed, °C120–140Chamber, °C70–150Drying, °C, h1204 h

3DXTECH Thermax PEKK A3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: ThermaX™ PEKK-A 3D Printing Filament9 valuesUnless a row says otherwise: printed specimen print settings Printed Specimen Conditions Printer: Gearbox™ HT2 Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45°, 3 Perimeter Walls Extrusion Temp: 350°C Chamber Temp: 140°C Specimen Orientation: XY Flat
Tensile modulus XY	2750 MPap. 1: Tensile Modulus	ISO 527	in the median
Tensile strength (yield or break not stated) XY	105 MPap. 1: Tensile Strength	ISO 527	in the median
Elongation at break XY	5 %p. 1: Tensile Elongation	ISO 527	in the median
Flexural modulus XY	2680 MPap. 1: Flexural Modulus	ISO 178	in the median
Flexural strength XY	95 MPap. 1: Flexural Strength	ISO 178	in the median
HDT at 0.45 MPa	150 °Cp. 1: Deflection Temperature at 0.45	ISO 75 As the sheet prints it: 0.45 ISO 75	in the median
Glass transition temperature	162 °Cp. 1: Glass Transition Temperature	DSC	in the median
Melting temperature	305 °Cp. 1: Melt Temperature (Tm)	DSC
Density	1.27 g/ccp. 1: Density	ISO 1183

Print settings

Nozzle: 345–375 °Cown data sheet
Bed: 120–140 °Cown data sheet
Heated chamber: 70–150 °Cown data sheet
Drying: 120 °C for 4 hown data sheet
Hardened nozzle: not neededown data sheet

Its 2 print profiles, in the documents' words

No temperature stated3DXTECH, Technical Data Sheet: ThermaX™ PEKK-A 3D Printing FilamentRecommended printing settings
Nozzle 345-375C; Bed 120-140C; Chamber Recommended 70-150C if possible; Drying 120C for 4 hours3DXTECH, THERMAX™ PEKK-APrint Recommendations

Price

Not in the price sample.

Its 4 documents

What the maker says (1)

Adhesion between layersslower crystallization rate and lower internal stress result in better layer adhesion3DXTECH, THERMAX™ PEKK-Ap. 1

3DXTECH Thermax PEKK CStrength XY, MPa105Strength Z, MPa—Modulus XY, GPa3.2HDT 0.45, °C182HDT 1.8, °C—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—

3DXTECH Thermax PEKK C3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: ThermaX™ PEKK-C 3D Printing Filament9 valuesUnless a row says otherwise: printed specimen print settings Printed Specimen Conditions Printer: Gearbox™ HT2 Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45°, 3 Perimeter Walls Extrusion Temp: 370°C Chamber Temp: 160°C Specimen Orientation: XY Flat
Tensile modulus XY	3200 MPap. 1: Tensile Modulus	ISO 527	in the median
Tensile strength (yield or break not stated) XY	105 MPap. 1: Tensile Strength	ISO 527	in the median
Elongation at break XY	10 %p. 1: Tensile Elongation	ISO 527	in the median
Flexural modulus XY	2900 MPap. 1: Flexural Modulus	ISO 178	in the median
Flexural strength XY	134 MPap. 1: Flexural Strength	ISO 178	in the median
HDT at 0.45 MPa	182 °Cp. 1: Deflection Temperature at 0.45	ISO 75 As the sheet prints it: 0.45 ISO 75	in the median
Glass transition temperature	165 °Cp. 1: Glass Transition Temperature	DSC	in the median
Melting temperature	335 °Cp. 1: Melt Temperature (Tm)	DSC
Density	1.29 g/ccp. 1: Density	ISO 1183

Print settings

Nozzle: not stated
Bed: not stated
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Its print profile, in the documents' words

No temperature stated3DXTECH, Technical Data Sheet: ThermaX™ PEKK-C 3D Printing FilamentRecommended printing settings

Price

Not in the price sample.

Its 2 documents

Stratasys Antero 800NAStrength XY, MPa—Strength Z, MPa59.4Modulus XY, GPa—HDT 0.45, °C158HDT 1.8, °C157Nozzle, °CBed, °C—Chamber, °C—Drying, °C, h—

Stratasys Antero 800NAStratasys

Published values

Property	As published	Conditions	On the Overview
Stratasys, MATERIAL DATA SHEET Antero 800NA94 valuesUnless a row says otherwise: printed specimen print settings Table 4: Antero 800NA Mechanical Properties - F900 - T20F Tip · 0.254 mm (0.010 in.) Layer Height · ZX Orientation
Tensile modulus Z (ZX)	2.77 (0.04) GPap. 6: Tensile Properties: Modulus (Elastic) GPa (ZX), Table 4	ASTM D638	in the median
Tensile modulus Z (ZX)	2.89 (0.05) GPap. 7: Tensile Properties: Modulus (Elastic) GPa (ZX), Table 5	ASTM D638	not in the median: another value of this product is in it
Tensile modulus Z	2.7 GPap. 8: Table 6 No UV Exposure: Modulus (GPa)	ASTM D638	not in the median: another value of this product is in it
Tensile modulus Z (ZX)	4.03 (1.4) GPap. 12: Tensile Properties: Modulus (Elastic) GPa (ZX), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: another value of this product is in it
Tensile modulus XZ	2.64 (0.05) GPap. 6: Tensile Properties: Modulus (Elastic) GPa (XZ), Table 4	ASTM D638	not in the median: measured on a bar in another orientation
Tensile modulus XZ	2.71 (0.05) GPap. 7: Tensile Properties: Modulus (Elastic) GPa (XZ), Table 5	ASTM D638	not in the median: measured on a bar in another orientation
Tensile modulus XZ	3.87 (0.34) GPap. 12: Tensile Properties: Modulus (Elastic) GPa (XZ), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: measured on a bar in another orientation
Tensile yield strength Z (ZX)	59.4 (5.8) MPap. 6: Tensile Properties: Yield Strength MPa (ZX), Table 4	ASTM D638	in the median
Tensile yield strength Z (ZX)	50.1 (3.6) MPap. 7: Tensile Properties: Yield Strength MPa (ZX), Table 5	ASTM D638	not in the median: another value of this product is in it
Tensile yield strength Z	57.4 MPap. 8: Table 6 No UV Exposure: Yield Strength (MPa)	ASTM D638	not in the median: another value of this product is in it
Tensile yield strength XZ	86.7 (5.0) MPap. 6: Tensile Properties: Yield Strength MPa (XZ), Table 4	ASTM D638	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	90.0 (5.2) MPap. 7: Tensile Properties: Yield Strength MPa (XZ), Table 5	ASTM D638	not in the median: measured on a bar in another orientation
Tensile break strength Z (ZX)	59.7 (5.5) MPap. 6: Tensile Properties: Strength @ Break MPa (ZX), Table 4	ASTM D638	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	49.4 (3.8) MPap. 7: Tensile Properties: Strength @ Break MPa (ZX), Table 5	ASTM D638	not in the median: another value of this product is in it
Tensile break strength Z	57.6 MPap. 8: Table 6 No UV Exposure: Stress at Break (MPa)	ASTM D638	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	36.7 (4.4) MPap. 12: Tensile Properties: Strength @ Break MPa (ZX), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: another value of this product is in it
Tensile break strength XZ	73.0 (4.7) MPap. 6: Tensile Properties: Strength @ Break MPa (XZ), Table 4	ASTM D638	not in the median: measured on a bar in another orientation
Tensile break strength XZ	73.0 (13) MPap. 7: Tensile Properties: Strength @ Break MPa (XZ), Table 5	ASTM D638	not in the median: measured on a bar in another orientation
Tensile break strength XZ	88.8 (12) MPap. 12: Tensile Properties: Strength @ Break MPa (XZ), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: measured on a bar in another orientation
Elongation at break Z (ZX)	2.3 %p. 6: Tensile Properties: Elongation @ Break % (ZX), Table 4	ASTM D638	in the median
Elongation at break Z (ZX)	1.8 %p. 7: Tensile Properties: Elongation @ Break % (ZX), Table 5	ASTM D638	not in the median: another value of this product is in it
Elongation at break Z	2.4 %p. 8: Table 6 No UV Exposure: Elongation at Break (%)	ASTM D638	not in the median: another value of this product is in it
Elongation at break Z (ZX)	0.83 (0.28) %p. 12: Tensile Properties: Elongation @ Break % (ZX), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: another value of this product is in it
Elongation at break XZ	6.1 %p. 6: Tensile Properties: Elongation @ Break % (XZ), Table 4	ASTM D638	not in the median: measured on a bar in another orientation
Elongation at break XZ	6.4 %p. 7: Tensile Properties: Elongation @ Break % (XZ), Table 5	ASTM D638	not in the median: measured on a bar in another orientation
Elongation at break XZ	2.6 (0.65) %p. 12: Tensile Properties: Elongation @ Break % (XZ), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: measured on a bar in another orientation
Elongation at yield Z (ZX)	2.3 %p. 6: Tensile Properties: Elongation @ Yield % (ZX), Table 4	ASTM D638	listed under other properties
Elongation at yield Z (ZX)	1.8 %p. 7: Tensile Properties: Elongation @ Yield % (ZX), Table 5	ASTM D638	listed under other properties
Elongation at yield Z (ZX)	0.75 (0.27) %p. 12: Tensile Properties: Elongation @ Yield % (ZX), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	listed under other properties
Elongation at yield XZ	4.7 %p. 6: Tensile Properties: Elongation @ Yield % (XZ), Table 4	ASTM D638	listed under other properties
Elongation at yield XZ	4.8 %p. 7: Tensile Properties: Elongation @ Yield % (XZ), Table 5	ASTM D638	listed under other properties
Elongation at yield XZ	2.7 (0.64) %p. 12: Tensile Properties: Elongation @ Yield % (XZ), Table 12	ASTM D638 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	listed under other properties
Flexural modulus XZ	3.20 (0.04) GPap. 6: Flexural Properties: Modulus GPa (XZ), Table 4	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	not in the median: measured on a bar in another orientation
Flexural modulus ZX	2.65 (0.03) GPap. 6: Flexural Properties: Modulus GPa (ZX), Table 4	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	not in the median: measured on a bar in another orientation
Flexural modulus XZ	3.20 (0.02) GPap. 7: Flexural Properties: Modulus GPa (XZ), Table 5	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	not in the median: measured on a bar in another orientation
Flexural modulus ZX	3.84 (0.07) GPap. 7: Flexural Properties: Modulus GPa (ZX), Table 5	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	not in the median: measured on a bar in another orientation
Flexural modulus ZX	2.96 (0.12) GPap. 12: Flexural Properties: Modulus GPa (ZX), Table 12	ASTM D790 As the sheet prints it: ASTM D790, Procedure A annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: measured on a bar in another orientation
Flexural modulus XZ	40.3 (0.11) GPaphysically implausiblep. 12: Flexural Properties: Modulus GPa (XZ), Table 12	ASTM D790 As the sheet prints it: ASTM D790, Procedure A annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: physically implausible as published
Flexural strength ZX	106 (13) MPap. 6: Flexural Properties: Strength @ Break MPa (ZX), Table 4	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	not in the median: measured on a bar in another orientation
Flexural strength ZX	96.6 (11) MPap. 7: Flexural Properties: Strength @ Break MPa (ZX), Table 5	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	not in the median: measured on a bar in another orientation
Flexural strength XZ	173 (4.9) MPap. 12: Flexural Properties: Flex Strength MPa (XZ), Table 12	ASTM D790 As the sheet prints it: ASTM D790, Procedure A annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: measured on a bar in another orientation
Flexural strength ZX	53.6 (8.2) MPap. 12: Flexural Properties: Flex Strength MPa (ZX), Table 12	ASTM D790 As the sheet prints it: ASTM D790, Procedure A annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: measured on a bar in another orientation
Flexural elongation at break ZX	4.1 %p. 6: Flexural Properties: Strain @ Break % (ZX), Table 4	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	listed under other properties
Flexural elongation at break ZX	3.6 %p. 7: Flexural Properties: Strain @ Break % (ZX), Table 5	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	listed under other properties
Flexural elongation at break ZX	1.8 (1.4) %p. 12: Flexural Properties: Strain @ Break % (ZX), Table 12	ASTM D790 As the sheet prints it: ASTM D790, Procedure A annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	listed under other properties
Flexural stress at conventional deflection XZ	136 (2.3) MPap. 6: Flexural Properties: Strength @ 5% Strain MPa (XZ), Table 4	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	listed under other properties
Flexural stress at conventional deflection XZ	137 (1.85) MPap. 7: Flexural Properties: Strength @ 5% Strain MPa (XZ), Table 5	ASTM D790 As the sheet prints it: ASTM D790, Procedure A	listed under other properties
Izod impact strength XZ	41.1 (6.9) J/mp. 6: Impact Properties: Notched J/m (XZ), Table 4	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength ZX	33.3 (4.2) J/mp. 6: Impact Properties: Notched J/m (ZX), Table 4	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength XZ	1,730 (680) J/mp. 6: Impact Properties: Unnotched J/m (XZ), Table 4	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength ZX	203 (35) J/mp. 6: Impact Properties: Unnotched J/m (ZX), Table 4	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength XZ	40.0 (6.3) J/mp. 7: Impact Properties: Notched J/m (XZ), Table 5	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength ZX	30.1 (6.0) J/mp. 7: Impact Properties: Notched J/m (ZX), Table 5	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength XZ	2,730 (1,400) J/mp. 7: Impact Properties: Unnotched J/m (XZ), Table 5	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength ZX	119 (44) J/mp. 7: Impact Properties: Unnotched J/m (ZX), Table 5	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength XZ	27.2 (5.3) J/mp. 12: Impact Properties: Notched J/m (XZ), Table 12	ASTM D256, ASTM D4812 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: in J/m
Izod impact strength ZX	16.6 (6.4) J/mp. 12: Impact Properties: Notched J/m (ZX), Table 12	ASTM D256, ASTM D4812 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: in J/m
Izod impact strength XZ	625 (120) J/mp. 12: Impact Properties: Unnotched J/m (XZ), Table 12	ASTM D256, ASTM D4812 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: in J/m
Izod impact strength ZX	48.1 (10) J/mp. 12: Impact Properties: Unnotched J/m (ZX), Table 12	ASTM D256, ASTM D4812 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: in J/m
Compression strength XZ	95.8 (5.9) MPap. 6: Compression Properties: Yield Strength MPa (XZ), Table 4	ASTM D695
Compression strength ZX	95.4 (4.0) MPap. 6: Compression Properties: Yield Strength MPa (ZX), Table 4	ASTM D695
Compression strength XZ	98.4 (4.8) MPap. 7: Compression Properties: Yield Strength MPa (XZ), Table 5	ASTM D695
Compression strength ZX	102 (1.4) MPap. 7: Compression Properties: Yield Strength MPa (ZX), Table 5	ASTM D695
Compression strength XZ	108 (13) MPap. 12: Compression Properties: Yield Strength MPa (XZ), Table 12	ASTM D695 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium
Compression strength ZX	106 (4.6) MPap. 12: Compression Properties: Yield Strength MPa (ZX), Table 12	ASTM D695 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium
HDT XY, at 0.45 MPa	158 °C (316 °F)p. 4: HDT @ 66 psi, XY	ASTM D648 As the sheet prints it: HDT @ 66 psi ASTM D648 Method B as printed As printed	in the median
HDT XY, at 0.45 MPa	177 °C (350.6 °F)p. 11: HDT @ 66 psi (printed), XY	ASTM D648 As the sheet prints it: HDT @ 66 psi (printed) ASTM D648 Method B annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: annealed; the as-printed value is in it
HDT XY, at 1.8 MPa	157 °C (315 °F)p. 4: HDT @ 264 psi, XY	ASTM D648 As the sheet prints it: HDT @ 264 psi ASTM D648 Method B as printed As printed	in the median
HDT XY, at 1.8 MPa	159 °C (318.2 °F)p. 11: HDT @ 266 psi (printed), XY	ASTM D648 As the sheet prints it: HDT @ 266 psi (printed) ASTM D648 Method B annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: annealed; the as-printed value is in it
HDT ZX, at 0.45 MPa	158 °C (316 °F)p. 4: HDT @ 66 psi, ZX	ASTM D648 As the sheet prints it: HDT @ 66 psi ASTM D648 Method B as printed As printed	not in the median: measured on a bar in another orientation
HDT at 0.45 MPa	151 °C (304 °F)p. 4: Molded HDT @ 66 psi	moulded bar (resin supplier's value), ASTM D648 As the sheet prints it: Molded HDT @ 66 psi ASTM D648 Method B	not in the median: measured on a moulded bar
HDT XZ, at 0.45 MPa	170 °C (354.2 °F)p. 11: HDT @ 66 psi (printed), XZ	ASTM D648 As the sheet prints it: HDT @ 66 psi (printed) ASTM D648 Method B annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: annealed; the as-printed value is in it
HDT ZX, at 0.45 MPa	176 °C (348.8 °F)p. 11: HDT @ 66 psi (printed), ZX	ASTM D648 As the sheet prints it: HDT @ 66 psi (printed) ASTM D648 Method B annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: annealed; the as-printed value is in it
HDT ZX, at 1.8 MPa	156 °C (313 °F)p. 4: HDT @ 264 psi, ZX	ASTM D648 As the sheet prints it: HDT @ 264 psi ASTM D648 Method B as printed As printed	not in the median: measured on a bar in another orientation
HDT at 1.8 MPa	147 °C (297 °F)p. 4: Molded HDT @ 264 psi	moulded bar (resin supplier's value), ASTM D648 As the sheet prints it: Molded HDT @ 264 psi ASTM D648 Method B	not in the median: measured on a moulded bar
HDT XZ, at 1.8 MPa	159 °C (318.2 °F)p. 11: HDT @ 266 psi (printed), XZ	ASTM D648 As the sheet prints it: HDT @ 266 psi (printed) ASTM D648 Method B annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: annealed; the as-printed value is in it
HDT ZX, at 1.8 MPa	155 °C (311 °F)p. 11: HDT @ 266 psi (printed), ZX	ASTM D648 As the sheet prints it: HDT @ 266 psi (printed) ASTM D648 Method B annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: annealed; the as-printed value is in it
Glass transition temperature	156 °C (313 °F)p. 4: Tg	ASTM D7426 As the sheet prints it: ASTM D7426 Inflection Point as printed As printed	in the median
Glass transition temperature	151 °C (303.8 °F)p. 11: Tg	ASTM D7426 As the sheet prints it: ASTM D7426-08 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium	not in the median: annealed; the as-printed value is in it
Melting temperature	300 °C (572 °F)p. 4: Melt Point	ASTM D7426 As the sheet prints it: ASTM D7426 Peak Heat as printed As printed
Thermal conductivity	0.2988 W/m*K W/(m·K)p. 4: Thermal Conductivity @0 °C	ASTM E1952 as printed As printed tested at 0 °C
Thermal conductivity	0.3011 W/m*K W/(m·K)p. 4: Thermal Conductivity @30 °C	ASTM E1952 as printed As printed tested at 30 °C
Thermal conductivity	0.3054 W/m*K W/(m·K)p. 4: Thermal Conductivity @60 °C	ASTM E1952 as printed As printed tested at 60 °C
Thermal conductivity	0.3088 W/m*K W/(m·K)p. 4: Thermal Conductivity @90 °C	ASTM E1952 as printed As printed tested at 90 °C
Coefficient of thermal expansion	36.11 μm/[m*°C] µm/m/Kp. 4: Mean CTE, XY	ASTM E831 As the sheet prints it: ASTM E831 (40 °C to 140 °C) as printed As printed tested at 40 °C to 140 °C
Coefficient of thermal expansion	50.20 μm/[m*°C] µm/m/Kp. 4: Mean CTE, ZX	ASTM E831 As the sheet prints it: ASTM E831 (40 °C to 140 °C) as printed As printed tested at 40 °C to 140 °C
Coefficient of thermal expansion	48.89 μm/[m*°C] µm/m/Kp. 11: Mean CTE (X)	ASTM E831 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium
Coefficient of thermal expansion	46.61 μm/[m*°C] µm/m/Kp. 11: Mean CTE (Y)	ASTM E831 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium
Coefficient of thermal expansion	52.54 μm/[m*°C] µm/m/Kp. 11: Mean CTE (Z)	ASTM E831 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium
Density	1.28 g/cm3p. 4: Specific Gravity	ASTM D792 as printed As printed tested at 23 °C
Density	1.31 g/cm3p. 11: Specific Gravity	ASTM D792 annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium
Relative permittivity	3.32p. 4: Dielectric Constant	ASTM D150 As the sheet prints it: ASTM D150 1 kHz test condition
Relative permittivity	3.23p. 11: Dielectric Constant, XY	ASTM D150 As the sheet prints it: ASTM D150-98 1 kHz test condition annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium
Relative permittivity	3.32p. 11: Dielectric Constant, ZX	ASTM D150 As the sheet prints it: ASTM D150-98 1 kHz test condition annealed at 200 °C for 3 h annealed at 200 °C (392 °F) for three hours in a sand medium

Print settings

Nozzle: not stated
Bed: not stated
Heated chamber: not stated
Drying: not stated
Hardened nozzle: neededown data sheet
Annealing: 200 °C for 3 hown data sheet

Its print profile, in the documents' words

No temperature statedStratasys, MATERIAL DATA SHEET Antero 800NAp. 3: Product Information: Table 1 and System Requirements

Price

Not in the price sample.

Its 2 documents

What the maker says (12)

BenefitsAntero 800NA is a PEKK-based FDM thermoplastic with excellent mechanical properties that include high strength, high heat resistance, toughness and wear-resistance.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 2
BenefitsThese superior qualities make it a lighter alternative to aluminum and steel in certain use cases.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 2
Good forChemical resistance and minimal outgassing provide suitability for aerospace applications where prototypes and parts are exposed to jet fuel, oil, and hydraulic fluid.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 2
Good forOther uses include industrial applications where high strength and chemical resistance are needed.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 2
Benefits3D printing with Antero 800NA FDM filament avoids the waste associated with subtractive manufacturing of high-cost bulk PEKK material.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 2
Nozzle wearHardened Fortus 450mc headStratasys, MATERIAL DATA SHEET Antero 800NAp. 3
Nozzle wearHardened F900 headStratasys, MATERIAL DATA SHEET Antero 800NAp. 3
Nozzle wearThe T20F improves mechanical performance and is the recommended tip.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 3
Printing adviceAnnealing is a heat treatment process used to reduce internal stresses introduced during the FDM printing process.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 11
Printing adviceBy heating the material to a controlled temperature below its melting point and holding it there for a set period, the polymer chains can relax and reorganize into a more stable, orderly structure.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 11
Printing adviceThis change can improve certain physical and mechanical properties, such as tensile and flexural modulus, heat deflection temperature, and chemical resistance.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 11
Printing adviceSamples were then annealed at 200 °C (392 °F) for three hours in a sand medium.Stratasys, MATERIAL DATA SHEET Antero 800NAp. 11

LEHVOSS LUVOCOM 3F PEKK 50082Strength XY, MPa90Strength Z, MPa—Modulus XY, GPa3HDT 0.45, °C300HDT 1.8, °C—Nozzle, °C340–380Bed, °C110–140Chamber, °CnoneDrying, °C, h1104 h

LEHVOSS LUVOCOM 3F PEKK 50082LEHVOSS

Published values

Property	As published	Conditions	On the Overview
3D4Makers, LUVOCOM 3F PEKK 50082 Filament9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bartested at 23°C
Tensile modulus orientation not stated	3 GPap. 1: Modulus of elasticity 23 °C/50% rh ISO 527	ISO 527 As the sheet prints it: 23 °C/50% rh ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	90 MPap. 1: Tensile Strength 23 °C/50% rh ISO 527	ISO 527 As the sheet prints it: 23 °C/50% rh ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strain at strength orientation not stated	5 %p. 1: Elongation at maximum force 23 °C/50% rh ISO 527	ISO 527 As the sheet prints it: 23 °C/50% rh ISO 527	listed under other properties
Flexural modulus orientation not stated	2.5 GPap. 1: Flexural Modulus 23 °C/50% rh ISO 178	ISO 178 As the sheet prints it: 23 °C/50% rh ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	150 MPap. 1: Flexural Strength 23 °C/50% rh ISO 178	ISO 178 As the sheet prints it: 23 °C/50% rh ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
HDT	300 °Cp. 1: Heat Distortion Temp. Service temperature PHYSICAL DATA	no standard statedtest temperature not stated	not in the median: set apart (never used to pass), test bar not described as printed
Water absorption	0.1 %p. 1: Water Absorption 23 °C/24h ISO 62	specimen not stated, ISO 62 As the sheet prints it: 23 °C/24h ISO 62
Melt volume-flow rate	20 cm3/10 minp. 1: Melt Volume Rate MVR 380 °C/2,16 kg ISO1133	specimen not stated, ISO 1133 As the sheet prints it: 380 °C/2 16 kg ISO1133 tested at 380°C
Mould shrinkage orientation not stated	1,0-1.6%p. 1: Linear Mould Shrinkage	specimen not stated, no standard named As the sheet prints it: DIN 16742 test temperature not stated

Print settings

Nozzle: 340–380 °Cown data sheet
Bed: 110–140 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 110 °C for 4 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 360°C (340-380°C); Bed 110-140°C; Chamber printable in non-heated chambers; Drying 4 hours, 110°C3D4Makers, LUVOCOM 3F PEKK 50082 Filamentp. 1: Recommended printing settings; p. 1: Nozzle temperature; p. 1: Description

Price

Not in the price sample.

Its 2 documents

What the maker says (5)

BenefitsWith high heat resistance, chemical resistance , has the ability to withstand high mechanical loads, is inherent flame retardant and has unique tribological properties.3D4Makers, LUVOCOM 3F PEKK 50082 Filamentp. 1
BenefitsPEKK Filament has a tuneable crystallization rate which allows FFF or FDM users to take advantage of both the extreme performance of PAEKs and easier processing of amorphous materials3D4Makers, LUVOCOM 3F PEKK 50082 Filamentp. 1
Warping and shrinkageThis unique modified neat PEKK provides dimensional stability and is printable in non-heated chambers, delivering semi-crystalline parts with no warp.3D4Makers, LUVOCOM 3F PEKK 50082 Filamentp. 1
Adhesion between layersPEKK Filament is easier to print than regular PEEK filament with a better layer adhesion, while offering similar strength and resistance properties; better dimensional stability.3D4Makers, LUVOCOM 3F PEKK 50082 Filamentp. 1
Adhesion between layersIt comes with enhanced flow behaviour which improves the printability and layer adhesion.3D4Makers, LUVOCOM 3F PEKK 50082 Filamentp. 1

Ensinger TECAFIL PEKK natural - 1.75 mmStrength XY, MPa86.3Strength Z, MPa—Modulus XY, GPa2.92HDT 0.45, °C—HDT 1.8, °C—Nozzle, °C340–380Bed, °C140–160Chamber, °C120–160Drying, °C, h1208 h

Ensinger TECAFIL PEKK natural - 1.75 mmEnsinger

Published values

Property	As published	Conditions	On the Overview
Filament2Print, TECAFIL PEKK natural - 1.75 mm - Filament19 values
Tensile modulus XY	2921,0 MPap. 1: Modulus of elasticity	no standard stated	in the median
Tensile modulus ZX	2997,7 MPap. 1: Modulus of elasticity 5mm/min, Orientation ZX	ISO 527 As the sheet prints it: 5mm/min Orientation ZX ISO 527-2	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) XY	86,3 MPap. 1: Tensile strength	no standard stated	in the median
Tensile strength (yield or break not stated) XZ	89,5 MPap. 1: Tensile strength 5mm/min, Orientation XZ	ISO 527 As the sheet prints it: 5mm/min Orientation XZ ISO 527-2	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) ZX	92,7 MPa	ISO 527 As the sheet prints it: DIN EN ISO 527-2; rate=5 mm/min; printer=Kumovis R1	not in the median: measured on a bar in another orientation
Elongation at break XY	95,6 %p. 1: Elongation at break (tensile test) 5mm/min, Orientation XY	ISO 527 As the sheet prints it: tensile test 5mm/min Orientation XY ISO 527-2	in the median
Elongation at break XZ	120,3 %p. 1: Elongation at break (tensile test)	no standard stated	not in the median: measured on a bar in another orientation
Elongation at break ZX	79,2 %	ISO 527 As the sheet prints it: DIN EN ISO 527-2; rate=5 mm/min; printer=Kumovis R1	not in the median: measured on a bar in another orientation
Elongation at yield XY	5,4 %p. 1: Elongation at yield (tensile test)	no standard stated	listed under other properties
Elongation at yield XZ	5,4 %p. 1: Elongation at yield (tensile test) 5mm/min, Orientation XZ	ISO 527 As the sheet prints it: tensile test 5mm/min Orientation XZ ISO 527-2	listed under other properties
Elongation at yield ZX	4,6 %	ISO 527 As the sheet prints it: DIN EN ISO 527-2; rate=5 mm/min; printer=Kumovis R1	listed under other properties
Flexural modulus	3000,0 MPap. 1: Modulus of elasticity (flexural test)	ISO 178 As the sheet prints it: DIN EN ISO 178; rate=2 mm/min; preload=10 N	not in the median: measured on a moulded bar
Flexural strength orientation not stated	128,0 MPap. 1: Flexural strength 2 mm/min, 10 N	ISO 178 As the sheet prints it: 2 mm/min 10 N ISO 178	not in the median: measured on a moulded bar
Charpy impact strength	5,0 kJ/m2p. 1: Notched impact strength max. 7,5J - 23°C	ISO 179 As the sheet prints it: 7 5J - 23°C ISO 179-1eA tested at 23°C	not in the median: measured on a moulded bar
HDT	139 °Cp. 1: Deflection temperature	no standard stated	not in the median: measured on a moulded bar
Glass transition temperature	160 °Cp. 1: Glass transition temperature	no standard stated	not in the median: the resin supplier's value, not a printed part
Melting temperature	300 °Cp. 1: Melting temperature	ISO 11357
Water absorption	0,6 %p. 1: Moisture absorption	ISO 62
Melt volume-flow rate	35 cm³/10 minp. 1: MVR	no standard stated

Print settings

Nozzle: 340–380 °Cown data sheet
Bed: 140–160 °Cown data sheet
Heated chamber: 120–160 °Cown data sheet
Drying: 120 °C for 8 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 340 - 380 °C; Bed 140 - 160 °C; Chamber 120 - 160; Drying 120 °C; Drying time 8 hFilament2Print, TECAFIL PEKK natural - 1.75 mm - Filamentp. 1: Recommended printing settings; p. 1: Build chamber temperature; p. 1: bed temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

Good forelectronics automotive industry chemical technology mechanical engineering aircraft and aerospace technologyFilament2Print, TECAFIL PEKK natural - 1.75 mm - Filamentp. 1
Benefitsinherent flame retardantFilament2Print, TECAFIL PEKK natural - 1.75 mm - Filamentp. 1
Warping and shrinkagegood dimensional stabilityFilament2Print, TECAFIL PEKK natural - 1.75 mm - Filamentp. 1
Moisture sensitivityTo achieve optimum mechanical properties, it is recommended to pre-dry the material with the above mentioned parameters.Filament2Print, TECAFIL PEKK natural - 1.75 mm - Filamentp. 1

3D4Makers PEKK-AStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—HDT 0.45, °C—HDT 1.8, °C—Nozzle, °C350–400Bed, °C120–160Chamber, °C70–150Drying, °C, h1206–8 h

3D4Makers PEKK-A3D4Makers

Published values

Property	As published	Conditions	On the Overview
3D4Makers, Technical Data Sheet 3D Printing Filament PEKK-A Filament2 values
Charpy impact strength	5.5 kJ/m2p. 1: Charpynotchedimpactstrenght	ISO 179 As the sheet prints it: ISO179/1eA tested at +24°Cnotched	not in the median: measured on a moulded bar
Density	1.27 g/cm³p. 1: Density	ISO 1183

Print settings

Nozzle: 350–400 °Cown data sheet
Bed: 120–160 °Cown data sheet
Heated chamber: 70–150 °Cown data sheet
Drying: 120 °C for 6–8 hown data sheet
Hardened nozzle: not stated

Its 2 print profiles, in the documents' words

Nozzle 350-400°C; Bed 120-160°C; Chamber 70-150°C; Drying 6-8hours,120°C3D4Makers, Technical Data Sheet 3D Printing Filament PEKK-A Filamentp. 1: Recommended printing settings; p. 1: Dryingrecommendations
Nozzle 350 - 400°C; Bed 120 - 160°C; Chamber 70 - 150°C; Drying 120°C, 4 - 8 hours3D4Makers, PEKK-A Filamentp. 1: Print Settings: Print Temperature; Bed Temperature; Chamber Temperature; Drying Temperature; Adhesion

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Printing adviceBetter printability compared to PEEK3D4Makers, PEKK-A Filamentp. 1

Not published by any product: notched impact and price.

Values are for the colour each sheet tested; pigment can change them.