PEEK

Beyond H2C capability. Kept for reference, never a candidate: it needs more heat than the H2C gives.

7 products from 6 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
not published

How the numbers are worked out

iSANMATE PEEKStrength XY, MPa100Modulus XY, GPa—Charpy notched, kJ/m²6HDT 0.45, °C—HDT 1.8, °C152Nozzle, °C390–430Bed, °C110–150Chamber, °C90–150Drying, °C, h—

iSANMATE PEEKiSANMATE

Published values

Property	As published	Conditions	On the Overview
iSANMATE, PEEK14 valuesUnless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	100 MPap. 1: Tensile yield strength	printed specimen (implied by the document), ISO 527tested at 23°C	in the median
Elongation at break orientation not stated	40 %p. 1: Elongation at break	ISO 527tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	4.2 GPap. 1: Flexural modulus	ISO 178tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	170 MPap. 1: Flexural strength	printed specimen (implied by the document), ISO 178 As the sheet prints it: ISO 178; yield tested at 23°C	in the median
Charpy impact strength orientation not stated	6 kJ/m²p. 1: Charpy strength notched	printed specimen (implied by the document), ISO 179 As the sheet prints it: ISO 179/1eA tested at 23°C	in the median
Izod impact strength orientation not stated	6 kJ/m²p. 1: Izod strength notched	printed specimen (implied by the document), ISO 180 As the sheet prints it: ISO 180/A tested at 23°C	in the median
Hardness orientation not stated	85 Shore Dp. 2: Hardness	ISO 868 As the sheet prints it: ISO 868; saturation tested at 23°C	in the median
Compression strength orientation not stated	125 MPap. 1: Compression strength	ISO 604tested at 23°C
HDT at 1.8 MPa	152 °Cp. 1: HDT	ISO 75 As the sheet prints it: ISO 75-f; 1.8 MPa	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	143 °Cp. 1: Glass transition temperature	ISO 11357 As the sheet prints it: ISO 11357; onset	in the median
Melting temperature	343 °Cp. 1: Melting temperature	ISO 11357
Coefficient of thermal expansion along the melt flow	45 ppm/Kp. 1: Coefficient of thermal expansion	ISO 11359
Density	1.30 g/cm³p. 1: Density	ISO 1183 As the sheet prints it: ISO 1183; crystalline
Water absorption	0.40 %p. 2: Water absorption	ISO 62 As the sheet prints it: ISO 62-1; immersion tested at 23°C

Print settings

Nozzle: 390–430 °Cown data sheet
Bed: 110–150 °Cown data sheet
Heated chamber: 90–150 °Cown data sheet
Drying: not stated
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 390 -430 ºC; Bed 110 - 150 ºC; Chamber 90- 150 °CiSANMATE, PEEKRecommended printing settings

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

Good forIt is often used in demanding applications such as aerospace, automotive, chemical, and medical industries.iSANMATE, PEEKp. 1
BenefitsIt has excellent biocompatibility, chemical resistance, mechanical properties, and thermal properties.iSANMATE, PEEKp. 1

3DXTECH ThermaX PEEKStrength XY, MPa100Modulus XY, GPa3.72Charpy notched, kJ/m²—HDT 0.45, °C140HDT 1.8, °C—Nozzle, °C400–480Bed, °C140–180Chamber, °C70–140Drying, °C, h1204 h

3DXTECH ThermaX PEEK3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, ThermaX PEEK8 valuesUnless a row says otherwise: printed specimen print settings Printed Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 380-400°C Bed Temp: 130-140°C Specimen Orientation: XY Flat
Tensile modulus XY	3720 MPap. 1: Tensile Modulus	ISO 527	in the median
Tensile strength (yield or break not stated) XY	100 MPap. 1: Tensile Strength	ISO 527	in the median
Elongation at break XY	28 %p. 1: Tensile Elongation	ISO 527	in the median
Flexural modulus XY	2700 MPap. 1: Flexural Modulus	ISO 178	in the median
Flexural strength XY	130 MPap. 1: Flexural Strength	ISO 178	in the median
HDT at 0.45 MPa	140 °Cp. 1: Deflection Temperature at 0.45	ISO 75 As the sheet prints it: 0.45 ISO 75	in the median
Glass transition temperature	143 °Cp. 1: Glass Transition Temperature	DSC	in the median
Density	1.30 g/ccp. 1: Density	ISO 1183

Print settings

Nozzle: 400–480 °Cown data sheet
Bed: 140–180 °Cown data sheet
Heated chamber: 70–140 °Cown data sheet
Drying: 120 °C for 4 hown data sheet
Hardened nozzle: not neededown data sheet

Its 2 print profiles, in the documents' words

No temperature stated3DXTECH, ThermaX PEEKp. 1: Printed Specimen Conditions, which are not printing guidance
Nozzle 400-480C; Bed 140-180C; Chamber Recommended 70-140C if possible; Drying 120C for 4 hours3DXTECH, THERMAX™ PEEKPrint Recommendations

Price

Not in the price sample.

Its 4 documents

What the maker says (1)

BenefitsInherently flame resistant and self-extinguishing3DXTECH, THERMAX™ PEEKp. 1

SUNLU PEEKStrength XY, MPa77Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C147HDT 1.8, °C—Nozzle, °C390–420Bed, °C110–120Chamber, °CnoneDrying, °C, h110–1404–6 h

SUNLU PEEKSUNLU

Published values

Property	As published	Conditions	On the Overview
SUNLU, TECHNICAL DATA SHEET ISO PEEK11 valuesUnless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	77 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 30 mm/s; Printing temperature 390 °C; Infill: 100%; 90° raster orientation	in the median
Elongation at break XY	21 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min %	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 30 mm/s; Printing temperature 390 °C; Infill: 100%; 90° raster orientation	in the median
Flexural modulus XY	3163 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 30 mm/s; Printing temperature 390 °C; Infill: 100%; 90° raster orientation	in the median
Flexural strength XY	122 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 30 mm/s; Printing temperature 390 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength XY	138 KJ/m2physically implausiblep. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C	not in the median: physically implausible as published
Hardness	83 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD	ISO 868 As the sheet prints it: 23℃ HA/HD ISO 868 tested at 23°C	listed under other properties
HDT XY, at 0.45 MPa	147 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
Glass transition temperature	143 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃	ISO 11357 As the sheet prints it: ISO 11357-2	in the median
Melting temperature	343 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃	ISO 11357 As the sheet prints it: ISO 11357-3
Density	1.1965 g/cm3p. 1: Density ISO 1183 23℃ g/cm3	specimen not stated, ISO 1183 As the sheet prints it: 23℃ ISO 1183 tested at 23°C
Melt mass-flow rate	17 g/10 minphysically implausiblep. 1: Melt Mass-flow Rate ISO 1133 210℃/2.16 kg g/10 min	ISO 1133 As the sheet prints it: 210℃/2.16 kg ISO 1133 tested at 210°C

Print settings

Nozzle: 390–420 °Cown data sheet
Bed: 110–120 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 110–140 °C for 4–6 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 390; 420; Bed 110-120℃; Chamber Room Temperature; Drying 110-140℃, 4-6HSUNLU, TECHNICAL DATA SHEET ISO PEEKp. 2: Recommended printing settings; p. 2: Nozzle Temp.

Price

Not in the price sample.

Its 2 documents

What the maker says (9)

Good forAerospace, automotive components, medical devices, electronic components, etc.SUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
BenefitsHydrolysis-resistant, chemical-resistant, and wear-resistant, with UL94 V-0 flame retardancy.SUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
BenefitsExceptional toughness and high mechanical strength.SUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
Benefitsoutstanding fatigue resistance.SUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
BenefitsHigh temperature resistance and good electrical properties.SUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
Warping and shrinkageExcellent dimensional stabilitySUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
Nozzle wearFor long-term printing, the nozzle needs to be replacedSUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
Printing adviceprint at a low speed.SUNLU, TECHNICAL DATA SHEET ISO PEEKp. 1
Supports and removalSupported Material PVASUNLU, TECHNICAL DATA SHEET ISO PEEKp. 2

3D4Makers PEEKStrength XY, MPa105Modulus XY, GPa4.1Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Nozzle, °C360–400Bed, °C120Chamber, °C100Drying, °C, h120≥ 4 h

3D4Makers PEEK3D4Makers

Published values

Property	As published	Conditions	On the Overview
3D4Makers, PEEK Filament11 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	4.1 GPap. 1: Tensile Modulus 23 °C ISO 527	ISO 527 As the sheet prints it: 23 °C ISO 527 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	105 MPap. 1: Tensile Strength Yield, 23 °C ISO 527	printed specimen (implied by the document), ISO 527 As the sheet prints it: 23 °C ISO 527 tested at 23°C	in the median
Elongation at break orientation not stated	30 %p. 1: Tensile Elongation Break, 23 °C ISO 527	ISO 527 As the sheet prints it: 23 °C ISO 527 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	3.9 GPap. 1: Flexural Modulus 23 °C ISO 178	ISO 178 As the sheet prints it: 23 °C ISO 178 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural stress at conventional deflection orientation not stated	130 MPap. 1: Flexural Strength At 3,5% strain, 23 ° ISO 178	ISO 178 As the sheet prints it: 3 5% strain 23 ° ISO 178	listed under other properties
Hardness	85 Shore Dp. 1: Shore D Hardness 23 °C ISO 868	ISO 868 As the sheet prints it: 23 °C ISO 868 tested at 23°C	in the median
Compression strength orientation not stated	130 MPap. 1: Compressive Strength 23 °C ISO 604	ISO 604 As the sheet prints it: 23 °C ISO 604 tested at 23°C
HDT at 1.8 MPa	156 °Cp. 1: Heat deflection Temperature As mouled, 1,8 MPa ISO 75A-f	moulded bar (resin supplier's value), ISO 75 As the sheet prints it: 1,8 MPa ISO 75A-f	not in the median: measured on a moulded bar
Glass transition temperature	143 °Cp. 1: Glass Transition Onset ISO 11357	ISO 11357	in the median
Melting temperature	343 °Cp. 1: Melting Point ISO 11357	ISO 11357
Water absorption	0.45 %p. 1: Water Absorption by Immersion Saturation, 23 °C ISO 62-1	ISO 62 As the sheet prints it: 23 °C ISO 62-1 tested at 23°C

Print settings

Nozzle: 360–400 °Cown data sheet
Bed: 120 °Cown data sheet
Heated chamber: 100 °Cown data sheet
Drying: 120 °C for ≥ 4 hown data sheet
Hardened nozzle: not stated

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in 3D4Makers, Best practices in 3D printing PEEK (3D4Makers blog).

Its 2 print profiles, in the documents' words

Nozzle 360-400 °C; Bed 120 °C; Chamber around 100 ºC3D4Makers, PEEK Filamentp. 1: Recommended printing settings
Bed 120 - 150°C at minimum; Drying 120°C for minimum 4 hours3D4Makers, Best practices in 3D printing PEEK (3D4Makers blog)p. 1: drying; p. 1: Bed Temperature; p. 1: Fumes and gasses

Price

Not in the price sample.

Its 3 documents

What the maker says (9)

Good forPEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.3D4Makers, PEEK Filamentp. 1
BenefitsPEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures.3D4Makers, PEEK Filamentp. 1
Pitfalls and limitationsPEEK is a very difficult material to 3D print.3D4Makers, PEEK Filamentp. 2
Printing adviceYour printer should have adequate thermal control in the build chamber throughout the printing process.3D4Makers, PEEK Filamentp. 2
Printing adviceLack of process control can also lead to speccing on the part with black specs forming during printing on your part.3D4Makers, PEEK Filamentp. 2
Printing adviceLack of process control and inadequate temperatures can also lead to brown discoloration in the part, which is an indication that the parts has not been properly crystalized.3D4Makers, PEEK Filamentp. 2
Printing adviceDo not let the PEEK material remain in your printer's nozzle for extended periods of time when not extruding.3D4Makers, PEEK Filamentp. 2
Printing adviceThis will lead to speccing and nozzle blockages.3D4Makers, PEEK Filamentp. 2
Printing adviceYou could post 3D printing anneal your PEEK part in an oven.3D4Makers, PEEK Filamentp. 2

LEHVOSS LUVOCOM 3F PEEK 9581Strength XY, MPa97Modulus XY, GPa3.8Charpy notched, kJ/m²—HDT 0.45, °C145HDT 1.8, °C—Nozzle, °C390–440Bed, °C120Chamber, °C—Drying, °C, h1104 h

LEHVOSS LUVOCOM 3F PEEK 9581LEHVOSS

Published values

Property	As published	Conditions	On the Overview
3D4Makers, LUVOCOM 3F PEEK 9581 Filament9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bartested at 23°C
Tensile modulus orientation not stated	3,8 GPap. 1: Tensile Modulus 23 °C/50% rh ISO 527	ISO 527 As the sheet prints it: 23 °C/50% rh ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	97 MPap. 1: Tensile Strength 23 °C/50% rh ISO 527	ISO 527 As the sheet prints it: 23 °C/50% rh ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	5 %p. 1: Tensile Elongation 23 °C/50% rh ISO 527	ISO 527 As the sheet prints it: 23 °C/50% rh ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	3.4 GPap. 1: Flexural Modulus 23 °C/50% rh ISO 178	ISO 178 As the sheet prints it: 23 °C/50% rh ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	145 MPap. 1: Flexural Strength 23 °C/50% rh ISO 178	ISO 178 As the sheet prints it: 23 °C/50% rh ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural elongation at break orientation not stated	7%p. 1: Flexural Elongation	specimen not stated, ISO 178 As the sheet prints it: ISO 178; humidity=50 % rh after moisture conditioning 23 ºC/50% rh tested at 23 °C	listed under other properties
HDT	145 °Cp. 1: Heat Distortion Temp. ISO 75	ISO 75test temperature not stated	not in the median: set apart (never used to pass), test bar not described as printed
Water absorption	0.1 %p. 1: Water Absorption 23 °C/24h	specimen not stated, no standard named As the sheet prints it: 23 °C/24h
Melt volume-flow rate	22 cm3/10 minp. 1: Melt Volume Rate MVR 380 °C/10 kg ISO1183	specimen not stated, ISO 1183 As the sheet prints it: 380 °C/10 kg ISO1183 tested at 380°C

Print settings

Nozzle: 390–440 °Cown data sheet
Bed: 120 °Cown data sheet
Heated chamber: not stated
Drying: 110 °C for 4 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 390-440 °C; Bed + 120 °C; Drying 4 hours, 110°C3D4Makers, LUVOCOM 3F PEEK 9581 Filamentp. 1: Recommended printing settings; p. 1: Drying Instruction

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

Good forPEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.3D4Makers, LUVOCOM 3F PEEK 9581 Filamentp. 1
BenefitsPEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures.3D4Makers, LUVOCOM 3F PEEK 9581 Filamentp. 1
Adhesion between layersThe material has an excellent adhesion between layers, which results in great improvement of the impact resistance, strength, durability, and the printing process.3D4Makers, LUVOCOM 3F PEEK 9581 Filamentp. 1

Ensinger TECAFIL PEEK EV natural - 1.75 mmStrength XY, MPa89.3Modulus XY, GPa3.54Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Nozzle, °C420–440Bed, °C160–250Chamber, °C160–230Drying, °C, h1208 h

Ensinger TECAFIL PEEK EV natural - 1.75 mmEnsinger

Published values

Property	As published	Conditions	On the Overview
Filament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filament16 values
Tensile modulus XY	3543,0 MPap. 1: Modulus of elasticity	ISO 527	in the median
Tensile modulus ZX	3668,3 MPap. 1: Modulus of elasticity 5mm/min, Orientation ZX	ISO 527 As the sheet prints it: 5mm/min Orientation ZX ISO 527-2	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) XY	89,3 MPap. 1: Tensile strength	ISO 527	in the median
Tensile strength (yield or break not stated) ZX	92,3 MPap. 1: Tensile strength 5mm/min, Orientation ZX	ISO 527 As the sheet prints it: 5mm/min Orientation ZX ISO 527-2	not in the median: measured on a bar in another orientation
Elongation at break XY	119,5 %p. 1: Elongation at break (tensile test)	ISO 527 As the sheet prints it: 5mm/min, Orientation XY DIN EN ISO 527-2	in the median
Elongation at break XZ	30,7 %p. 1: Elongation at break (tensile test) 5mm/min, Orientation XZ	ISO 527 As the sheet prints it: tensile test 5mm/min Orientation XZ ISO 527-2	not in the median: measured on a bar in another orientation
Elongation at break ZX	8,1 %	ISO 527 As the sheet prints it: DIN EN ISO 527-2; rate=5 mm/min	not in the median: measured on a bar in another orientation
Elongation at yield XY	22,3 %p. 1: Elongation at yield (tensile test)	ISO 527	listed under other properties
Elongation at yield XZ	5,9 %p. 1: Elongation at yield (tensile test) 5mm/min, Orientation XZ	ISO 527 As the sheet prints it: tensile test 5mm/min Orientation XZ ISO 527-2	listed under other properties
Elongation at yield ZX	5,5 %	ISO 527 As the sheet prints it: DIN EN ISO 527-2; rate=5 mm/min	listed under other properties
Charpy impact strength	7,0 kJ/m2p. 1: Notched impact strength max. 7,5J - 23°C	ISO 179 As the sheet prints it: 7 5J - 23°C ISO 179-1eA tested at 23°C	not in the median: measured on a moulded bar
HDT at 1.8 MPa	162 °Cp. 1: Deflection temperature HDT-A	ISO 75 As the sheet prints it: HDT-A ISO-R 75 Method A	not in the median: measured on a moulded bar
Glass transition temperature	143 °Cp. 1: Glass transition temperature	no standard stated	not in the median: the resin supplier's value, not a printed part
Melting temperature	343 °Cp. 1: Melting temperature	no standard stated
Water absorption	0,03 %p. 1: Moisture absorption	no standard stated
Melt volume-flow rate	12 cm³/10 minp. 1: MVR	no standard stated

Print settings

Nozzle: 420–440 °Cown data sheet
Bed: 160–250 °Cown data sheet
Heated chamber: 160–230 °Cown data sheet
Drying: 120 °C for 8 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 420 - 440 °C; Bed 160 - 250 °C; Chamber 160 - 230 °C; Drying 120 °C; Drying time 8 hFilament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filamentp. 1: Recommended printing settings; p. 1: bed temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (6)

Good forelectronics food technology automotive industry chemical technology mechanical engineering aircraft and aerospace technologyFilament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filamentp. 1
Benefitsinherent flame retardantFilament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filamentp. 1
Benefitsgood slide and wear propertiesFilament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filamentp. 1
Benefitsresistance against high energy radiationFilament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filamentp. 1
Benefitshydrolysis and superheated steam resistantFilament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filamentp. 1
Moisture sensitivityTo achieve optimum mechanical properties, it is recommended to pre-dry the material with the above mentioned parameters.Filament2Print, TECAFIL PEEK EV natural - 1.75 mm - Filamentp. 1

3D4Makers R-PEEKStrength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Nozzle, °C400–450Bed, °C120–160Chamber, °C90Drying, °C, h1206–8 h

3D4Makers R-PEEK3D4Makers

Published values

Property	As published	Conditions	On the Overview
3D4Makers, Technical Data Sheet 3D Printing Filament R-PEEK Filament5 valuesUnless a row says otherwise: moulded bar (resin supplier's value)
Tensile modulus orientation not stated	3400 MPap. 1: Tensile Modulus	ASTM D638	not in the median: measured on a moulded bar
Tensile break strength orientation not stated	90 MPap. 1: Breaking Strength	ASTM D638	not in the median: measured on a moulded bar
Elongation at break orientation not stated	30 %p. 1: Elongation	ASTM D638	not in the median: measured on a moulded bar
Continuous service temperature	260 °Cp. 1: Service Temp. (constantly)	ASTM D648
Density	1.3 g/cm³p. 1: Density(at23°C)	ASTM D792 As the sheet prints it: at23°C ASTM D792 tested at 23°C

Print settings

Nozzle: 400–450 °Cown data sheet
Bed: 120–160 °Cown data sheet
Heated chamber: 90 °Cown data sheet
Drying: 120 °C for 6–8 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 400-450°C; Bed 120-160°C; Chamber +90°C; Drying 6-8hours,120°C3D4Makers, Technical Data Sheet 3D Printing Filament R-PEEK Filamentp. 1: Recommended printing settings; p. 1: Dryingrecommendations

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Good forR-PEEK is widely used in a variety of industries, including aerospace, automotive, electrical/electronics, engineering, marine and chemical.3D4Makers, R PEEK Filamentp. 1

Not published by any product: tensile strength (Z) and price.

Values are for the colour each sheet tested; pigment can change them.