PC-ABS
13 products from 11 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
13 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- shared data sheet
- not published
How the numbers are worked out
Polymaker PC ABSStrength XY, MPa39.9Strength Z, MPa22.9Modulus XY, GPa1.83Charpy notched, kJ/m²25.8HDT 0.45, °C112HDT 1.8, °C106Price, CAD/kg64Nozzle, °C250–270Bed, °C90–105Chamber, °C90–100Drying, °C, h756 h
Polymaker PC ABSPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, Polymaker PC ABS17 valuesThe same values also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet.Unless a row says otherwise: printed specimenprint settingsPrinting temperature 260 °C Bed temperature 105 °C Shell 2 Top & bottom layer 4 Infill 100% Environmental temperature 90˚C Cooling fan OFF The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purpose | |||
| Tensile modulus XY | 1835 ± 65 MPap. 4: Young’s modulus (X-Y)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Tensile modulus Z | 1677 ± 94 MPap. 4: Young’s modulus (Z)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Tensile strength (yield or break not stated) XY | 39.9 ± 1.0 MPap. 4: Tensile strength (X-Y)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Tensile strength (yield or break not stated) Z | 22.9 ± 1.2 MPap. 4: Tensile strength (Z)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Elongation at break XY | 4.2 ± 0.3 %p. 4: Elongation at break (X-Y)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Elongation at break Z | 1.5 ± 0.1 %p. 4: Elongation at break (Z)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Flexural modulus XY | 2081 ± 106 MPap. 4: Bending modulus (X-Y)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Flexural strength XY | 66.3 ± 0.9 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Charpy impact strength XY | 25.8 ± 1.3 kJ/m2p. 4: Charpy impact strength (X-Y)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 179, GB/T 1043moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Charpy impact strength XY | 13 ± 2 kJ/m2p. 4: Low temperature impact strength (X-Y) -30°Calso in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 179As the sheet prints it: ISO 179-1/1eA:2010moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: tested below room temperature |
| Charpy impact strength Z | 1.5 ± 0.2 kJ/m2p. 4: Low temperature impact strength (Z) -30°Calso in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | ISO 179As the sheet prints it: ISO 179-1/1eA:2010moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: tested below room temperature |
| HDT at 0.45 MPa | 111.7 °Cp. 3: Heat deflection temperature | ISO 75As the sheet prints it: ISO 75 0.45MPa | in the median |
| HDT at 1.8 MPa | 106.4 °Cp. 3: Heat deflection temperature | ISO 75As the sheet prints it: ISO 75 1.8MPa | in the median |
| Glass transition temperature | 109 °Cp. 3: Glass transition temperaturealso in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | DSCAs the sheet prints it: DSC, 10°C/min | in the median |
| Vicat softening temperature | 135 °Cp. 3: Vicat softening temperature | ISO 306, GB/T 1633 | |
| Density | 1.1 g/cm3p. 2: Densityalso in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | specimen not stated, ISO 1183, GB/T 1033 | |
| Water absorption | 0.352 %p. 2: Equilibrium water absorption (%)also in Polymaker, Polymaker™ PC-ABS Technical Data Sheet | specimen not stated, no standard namedAs the sheet prints it: Equilibrium water absorption | |
| Also named without a value: flexural modulus, flexural strength, charpy impact strength, melting temperature, crystallization temperature, thermal conductivity. | |||
| Polymaker, Polymaker™ PC-ABS Technical Data Sheet1 value | |||
| Melt mass-flow rate | 11-17 g/10minp. 1: Melt index 260°C, 5 kg | no standard namedAs the sheet prints it: 260°C 5 kg | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 90–105 °Cown data sheet
- Heated chamber
- 90–100 °Cown data sheet
- Drying
- 75 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 250 - 270 (℃); Bed 90 - 105 (˚C); Chamber 90-100 (˚C)Polymaker, Polymaker PC ABSRecommended printing settings
- Nozzle 250-270°C; Bed 90-105°C; Chamber Needed (90-100°C); Drying 75°C/6HPolymaker, Polymaker™ PC-ABS Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber
Price
64 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 64 CAD/kgPolymaker PC-ABS Black 1.75 1KG (SKU PMK-PAB-BLK-175-1KG)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (6)
- Surface finish
Polymaker™ PC-ABS is a PC/ABS polymer blend which offers excellent toughness and heat resistance while displaying good surface finish and good compatibility with metal plating.
Polymaker, Polymaker PC ABSp. 2 - Supports and removal
Recommended support material PolyDissolve™ S2
Polymaker, Polymaker PC ABSp. 4 - Printing advice
For large part it is recommended to use a heated chamber.
Polymaker, Polymaker PC ABSp. 4 - Printing advice
It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Polymaker, Polymaker PC ABSp. 4 - Printing advice
When printing with Polymaker™ PC-ABS it is recommended to use an enclosure.
Polymaker, Polymaker PC ABSp. 4 - Moisture sensitivity
It is highly recommended to use the PolyBox™ or PolyDryer™ Box when printing or storing Polymaker™ PC-ABS.
Polymaker, Polymaker™ PC-ABS Technical Data Sheetp. 1
Chemicals and environment (7)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, Polymaker PC ABSEffect of weak acids - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, Polymaker PC ABSEffect of strong acids - Alkali resistance: limited
Slight resistant
Effect of weak alkalis · weakPolymaker, Polymaker PC ABSEffect of weak alkalis - Alkali resistance: not resistant
Not resistant
Effect of strong alkalis · strongPolymaker, Polymaker PC ABSEffect of strong alkalis - Organic solvent resistance: not resistant
Not resistant
Effect of organic solventPolymaker, Polymaker PC ABSEffect of organic solvent - Oil and grease resistance: no data
No data available
Effect of oils and greasePolymaker, Polymaker PC ABSEffect of oils and grease - Post-processing: described in words
Annealing settings: 90˚C for 2h
Polymaker, Polymaker PC ABSp. 4: Annealing note
SUNLU PC/ABSStrength XY, MPa38Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²15IzodHDT 0.45, °C102HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C100–110Chamber, °C90–100Drying, °C, h70–80
SUNLU PC/ABSSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO PC/ABS10 valuesThe same values also in SUNLU, PC-ABS.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 38 ± 3 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 200-250 mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 8 ± 2 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 200-250 mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 2300 ± 200 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 200-250 mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 70 ± 3 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 200-250 mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 15 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 200-250 mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation | in the median |
| Hardness | 80 Shore Dp. 1: Shore Hardness ISO 868 23℃ HA/HDalso in SUNLU, PC-ABS | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | in the median |
| HDT XY, at 0.45 MPa | 102 ± 2 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 106 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, PC-ABS | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Density | 1.081 g/cm3p. 1: Density ISO 1183 23℃ g/cm3also in SUNLU, PC-ABS | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 22 ± 5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 260℃/5 kg g/10 min | ISO 1133As the sheet prints it: 260℃/5 kg ISO 1133 | |
| SUNLU, PC-ABS7 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 40 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Elongation at break XY | 8 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min % | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Flexural modulus XY | 2300 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: another value of this product is in it |
| Flexural strength XY | 70 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: another value of this product is in it |
| Izod impact strength XY | 70 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2 | ISO 180As the sheet prints it: 23℃ ISO180 | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 102 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃ | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO75 | not in the median: another value of this product is in it |
| Melt mass-flow rate | 22 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min | specimen not stated, ISO 1133As the sheet prints it: 190℃/2.16kg ISO1133 | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- 90–100 °Cown data sheet
- Drying
- 70–80 °Cown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 260-280; Bed 100-110℃; Chamber Enclosed-chamber printing with a chamber temperature of 90–100 °C; Drying 70-80℃SUNLU, TECHNICAL DATA SHEET ISO PC/ABSp. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 260-280; Bed 100-110℃; Chamber 90-100℃; Drying 70-80℃SUNLU, PC-ABSp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Material
Price
Not in the price sample.
Its 3 documents
What the maker says (7)
- Good for
Automotive trim, electronic 3C, toy decoration
SUNLU, PC-ABSp. 1 - Benefits
High heat resistance, high toughness
SUNLU, PC-ABSp. 1 - Surface finish
Good combination with metal coating, plastic plating
SUNLU, PC-ABSp. 1 - Supports and removal
Support Material PVA
SUNLU, PC-ABSp. 2 - Good for
Automotive trim parts, consumer electronics (3C), toys, and decorative items.
SUNLU, TECHNICAL DATA SHEET ISO PC/ABSp. 1 - Benefits
High heat resistance and high toughness.
SUNLU, TECHNICAL DATA SHEET ISO PC/ABSp. 1 - Surface finish
Good adhesion with metal coatings, suitable for plastic electroplating.
SUNLU, TECHNICAL DATA SHEET ISO PC/ABSp. 1
Fiberlogy PC/ABSStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²53HDT 0.45, °C110HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C80–100Chamber, °C—Drying, °C, h704 h
Fiberlogy PC/ABSFiberlogy
Data sheet shared with Fillamentum PC/ABS: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PC/ABS7 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 2000 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 42 MPap. 1: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 7 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2000 MPap. 1: Flexular Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 68 MPap. 1: Flexular Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 53 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 55 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23°C ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| Fiberlogy, PC/ABS Filament4 valuesUnless a row says otherwise: specimen not stated | |||
| Charpy impact strength orientation not stated | 53 kJ/m²p. 1: Charpy impact strength (notched) @ 23°C | ISO 179tested at 23 °C | not in the median: another value of this product is in it |
| Izod impact strength orientation not stated | 55 kJ/m²p. 1: Izod impact strength (notched) @ 23°C | ISO 180tested at 23 °C | not in the median: another value of this product is in it |
| HDT | 110°Cp. 1: HDT (description) | printed specimen (implied by the document), no standard stated | not in the median: set apart (never used to pass), no stated test load |
| Vicat softening temperature | 114°Cp. 1: Vicat softening temperature | ISO 306 | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PC/ABS2 values | |||
| Izod impact strength | 41 kJ/m2p. 1: Izod Impact Strength (Notched) @ -30°C ISO 180 kJ/m2 | ISO 180As the sheet prints it: -30°C ISO 180 | not in the median: tested below room temperature |
| Vicat softening temperature | 115 °Cp. 1: Vicat Softening Temperature, B120, 120°C/h | ISO 306As the sheet prints it: ISO 306; method=B120; rate=120 °C/h | |
| Fillamentum, PC/ABS1 value | |||
| Melt volume-flow rate | 15 cm³/10 minp. 1: Melt flow index | ISO 1133As the sheet prints it: ISO 1133; 10 kg | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PC/ABS; bed in Fiberlogy, PC/ABS Filament.
Its 3 print profiles, in the documents' words
- Nozzle 260°C - 280°C; Bed 80°C - 100°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy PC/ABSp. 1: Recommended printing settings
- Nozzle 230°C - 250°C; Bed 80°C - 100°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy PC/ABSp. 1: Recommended printing settings
- Nozzle 260–280°C; Bed 100°C; Drying 70°C / 4 hoursFiberlogy, PC/ABS Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 5 documents
What the maker says (1)
- Benefits
PC/ABS is characterized by very high impact strength, especially at low temperatures.
Fiberlogy, PC/ABS Filamentp. 1
Fillamentum PC/ABSStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²53HDT 0.45, °C110HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–105Chamber, °C—Drying, °C, h80≥ 4 h
Fillamentum PC/ABSFillamentum
Data sheet shared with Fiberlogy PC/ABS: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, PC/ABS9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2000 MPap. 1: Tensile modulus | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 42 MPap. 1: Tensile strength | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 7 %p. 1: Elongation | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2000 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 68 MPap. 1: Flexural strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 53 kJ/m2p. 1: Charpy impact resistance | ISO 179tested at 23°Cnotched | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 55 kJ/m2p. 1: Izod impact resistance | ISO 180As the sheet prints it: ISO 180-1A | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 113 °Cp. 1: Vicat softening temperature | ISO 306As the sheet prints it: ISO 306 B50 | |
| Density | 1,07 g/cm3p. 1: Material density | ISO 1183As the sheet prints it: ISO 1183-1 | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 90–105 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 260–280 °C; Bed 90–105 °CFillamentum, PC/ABSp. 1: Recommended printing settings
- Drying 80 °C; minimum drying time 4 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row PC/ABS; own minimum-time/temperature/need columns, with p1 restrictions
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
It offers high impact resistance.
Fillamentum, PC/ABSp. 1 - Benefits
This favorite compound is made from polymers improving temperature resistance given by polycarbonate part and ease of processing thanks to ABS.
Fillamentum, PC/ABSp. 1 - Printing advice
Other recommendation 10mm brim / raft
Fillamentum, PC/ABSp. 1 - Moisture sensitivity
PC/ABS 4 h 80 °C 5 stringing, MP, surface quality
Fillamentum, Drying of filaments before processing on 3D printerp. 2
3DXTECH 3DXMAX PCABSStrength XY, MPa59Strength Z, MPa—Modulus XY, GPa2.2Charpy notched, kJ/m²—HDT 0.45, °C126HDT 1.8, °C—Price, CAD/kg—Nozzle, °C280–310Bed, °C110–120Chamber, °CnoneDrying, °C, h120≥ 4 h
3DXTECH 3DXMAX PCABS3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, 3DXMAX PCABS8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 275°C Bed Temp: 110°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 2200 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 59 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 75 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 2370 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 86 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 126 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Glass transition temperature | 137 °Cp. 1: Glass Transition Temperature (Tg) | DSC | in the median |
| Density | 1.14 g/ccp. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 280–310 °Cown data sheet
- Bed
- 110–120 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 120 °C for ≥ 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, 3DXMAX PCABSRecommended printing settings
- Nozzle 280-310C; Bed 110-120C; Chamber Not required; Drying 120C for 4+ hours3DXTECH, 3DXMAX PC-ABS FilamentPrint Recommendations
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Benefits
Excellent ductility and impact resistance
3DXTECH, 3DXMAX® PC/ABSp. 1
3DXTECH Triton PC/ABS Model MaterialStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa1.85Charpy notched, kJ/m²—HDT 0.45, °C110HDT 1.8, °C—Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h806 h
3DXTECH Triton PC/ABS Model Material3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DXTECH, Technical Data Sheet: Triton™ PC/ABS Model Material8 values | |||
| Tensile modulus XY | 1850 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 40 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 6 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 1910 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 67 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 110 °Cp. 1: Deflection Temperature at 0.45 MPa (66psi) | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| Glass transition temperature | 123 °Cp. 1: Glass Transition Temperature DSC °C | no standard stated | in the median |
| Density | 1.14 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183 | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- recommendedown data sheet
- Drying
- 80 °C for 6 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Chamber Recommended; Drying 80°C for 6 Hours3DXTECH, TRITON3D™ PC/ABS - Stratasys® Compatiblep. 1: Print Recommendations
Price
Not in the price sample.
Its 3 documents
Flashforge PC/ABSStrength XY, MPa43.5Strength Z, MPa—Modulus XY, GPa0.8Charpy notched, kJ/m²43.5IzodHDT 0.45, °C123HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C90–110Chamber, °C40–70Drying, °C, h80≥ 12 h
Flashforge PC/ABSFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PC/ABS Filament10 values | |||
| Tensile modulus XY | 800-950 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 265 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Tensile strength (yield or break not stated) XY | 43.5-45.5 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 265 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Elongation at break XY | 24-26 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 265 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Flexural strength XY | 71.5-74.5 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 265 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Izod impact strength XY | 43.5-44.5 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2 | ISO 180as printednotchedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 265 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| HDT at 0.45 MPa | 123 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 130 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.14-1.15 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.8 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 19-22 g/10minp. 1: Melt Index MFR (260℃/5Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 260℃/5Kg ISO 1133 | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- 40–70 °Cown data sheet
- Drying
- optional: 80 °C for ≥ 12 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 250~280℃ (265℃ recommended); Bed 90~110℃ (100℃ recommended); Chamber 40~70℃; Drying In case the filament has become wet, it should be dried before being used; Using a hot dry air oven at 80℃ for at least 12 hours is recommendedFlashforge, Technical Data Sheet PC/ABS Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
PC/ABS has the features of high toughness, high strength, high heat resistance and electroplating ability.
Flashforge, Technical Data Sheet PC/ABS Filamentp. 1 - Benefits
It not only has excellent impact resistance and high temperature resistance of PC, but also has excellent electrochemical characteristics of ABS.
Flashforge, Technical Data Sheet PC/ABS Filamentp. 1 - Benefits
High toughness/High strength/High temperature resistance/Electroplating ability.
Flashforge, Technical Data Sheet PC/ABS Filamentp. 1 - Supports and removal
Recommended Support Material Self-supporting, HIPS
Flashforge, Technical Data Sheet PC/ABS Filamentp. 2 - Printing advice
After the printing process, it is recommended to dry the model in an oven at 100°C for 1-3 hours in order to increase the strength of the model.
Flashforge, Technical Data Sheet PC/ABS Filamentp. 3
Chemicals and environment (1)
- Post-processing: described in words
After the printing process, it is recommended to dry the model in an oven at 100°C for 1-3 hours in order to increase the strength of the model.
Flashforge, Technical Data Sheet PC/ABS Filamentp. 3: Post-processing note
Spectrum pc abs fr v0Strength XY, MPa60Strength Z, MPa—Modulus XY, GPa2.85Charpy notched, kJ/m²35IzodHDT 0.45, °C—HDT 1.8, °C90Price, CAD/kg50Nozzle, °C240–265Bed, °C90–110Chamber, °C—Drying, °C, h904 h
Spectrum pc abs fr v0Spectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, pc abs fr v011 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2850 MPap. 1: Tensile Modulus | ISO 527As the sheet prints it: ISO 527-2/1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Stress (Yield) | ISO 527As the sheet prints it: ISO 527-2/50 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | >50%p. 1: Tensile Strain (Break) | ISO 527As the sheet prints it: ISO 527-2/50 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 4%p. 1: Tensile Strain (Yield) | ISO 527As the sheet prints it: ISO 527-2/50 | listed under other properties |
| Flexural strength orientation not stated | 110 MPap. 1: Flexural Stress | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | NB Qualitative (no fracture)p. 1: Charpy impact strength, unnotched, -30°C | ISO 179tested at -30°C | not in the median: no number given |
| Charpy impact strength orientation not stated | NB Qualitative (no fracture)p. 1: Charpy impact strength, unnotched, 23°C | ISO 179tested at 23°C | not in the median: no number given |
| Izod impact strength | 35 kJ/m2p. 1: Notched Izod Impact Strength (23°C) | ISO 180As the sheet prints it: ISO 180/4A | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 90°Cp. 1: Heat Deflection Temperature 1.8 MPa | ISO 75As the sheet prints it: ISO 75-2/A, 1.8 MPa | in the median |
| Vicat softening temperature | 104°Cp. 1: VICAT Softening point | ISO 306 | |
| Density | 1.17 g/cm3p. 1: Specific Gravity | ISO 1183 | |
Print settings
- Nozzle
- 240–265 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 90 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 240 - 265°C; Bed 90 - 110°CSpectrum, pc abs fr v0Recommended printing settings; p. 2: Nozzle note; p. 2: Dry box; p. 2: * settings are based on a 0.5mm nozzle
- No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 5: Ruby or hardened nozzle recommended; p. 5: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended
- Drying 90°C, 4h; In justified casesSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
50 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 50 CAD/kgWhite - Spectrum PC/ABS FR V0 - 1.75mm, 1kg (SKU 5905991400721)in its price; seen 30 Sep 2026
Its 5 documents
What the maker says (8)
- Benefits
It is designed to meet UL-94 V0 flammability standards, which means it is self-extinguishing and meets the highest fire safety standards.
Spectrum, pc abs fr v0p. 1 - Surface finish
High gloss surface
Spectrum, pc abs fr v0p. 1 - Adhesion between layers
Excellent interlayer adhesion
Spectrum, pc abs fr v0p. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, pc abs fr v0p. 2 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, pc abs fr v0p. 2 - Printing advice
Closed chamber recommended for larger prints
Spectrum, pc abs fr v0p. 2 - Benefits
Flame-retardant UL-94 V0, halogen-free, excellent interlayer adhesion
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21 - Adhesion between layers
excellent interlayer adhesion
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21
Stratasys PC-ABSStrength XY, MPa—Strength Z, MPa29.9Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C118HDT 1.8, °C108Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
Stratasys PC-ABSStratasys
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Stratasys, PC-ABS Data Sheet46 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus Z (ZX) | 1.87 (0.19) GPap. 7: Modulus (Elastic) (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | in the median |
| Tensile modulus Z (ZX) | 1.75 (0.015) GPap. 8: Modulus (Elastic) (ZX; Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red | not in the median: another value of this product is in it |
| Tensile modulus Z (ZX) | 1.63 (0.035) GPap. 8: Modulus (Elastic) (ZX; Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red | not in the median: another value of this product is in it |
| Tensile modulus XZ | 1.99 (0.038) GPap. 7: Modulus (Elastic) (XZ) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile modulus XZ | 1.73 (0.017) GPap. 8: Modulus (Elastic) (XZ; Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red | not in the median: measured on a bar in another orientation |
| Tensile modulus XZ | 1.65 (0.020) GPap. 8: Modulus (Elastic) (XZ; Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red | not in the median: measured on a bar in another orientation |
| Tensile yield strength Z (ZX) | 29.9 (1.6) MPap. 8: Yield Strength (ZX; Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red | in the median |
| Tensile yield strength Z (ZX) | 26.9 (0.60) MPap. 8: Yield Strength (ZX; Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red | not in the median: another value of this product is in it |
| Tensile yield strength XZ | 36.5 (0.73) MPap. 7: Yield Strength (XZ; ASTM D638) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XZ | 37.5 (0.43) MPap. 8: Yield Strength (XZ; Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red | not in the median: measured on a bar in another orientation |
| Tensile yield strength XZ | 32.7 (0.46) MPap. 8: Yield Strength (XZ; Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red | not in the median: measured on a bar in another orientation |
| Tensile break strength Z (ZX) | 25.9 (1.6) MPap. 7: Strength @ Break (ZX; ASTM D638) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: another value of this product is in it |
| Tensile break strength Z (ZX) | 30.2 (1.3) MPap. 8: Strength @ Break (ZX; Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red | not in the median: another value of this product is in it |
| Tensile break strength Z (ZX) | 26.3 (0.59) MPap. 8: Strength @ Break (ZX; Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red | not in the median: another value of this product is in it |
| Tensile break strength XZ | 34.7 (0.83) MPap. 7: Strength @ Break (XZ; ASTM D638) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile break strength XZ | 35.3 (0.64) MPap. 8: Strength @ Break (XZ; Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red | not in the median: measured on a bar in another orientation |
| Tensile break strength XZ | 31.0 (0.50) MPap. 8: Strength @ Break (XZ; Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red | not in the median: measured on a bar in another orientation |
| Elongation at break Z | 1.8 (0.22) % | ASTM D638As the sheet prints it: ASTM D638; std dev=0.22print settings0.010 in. (0.254 mm) layer heights on the F900 | in the median |
| Elongation at break Z | 2.0 (0.14) %p. 8: Elongation @ Break % (Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; std dev=0.14 | not in the median: another value of this product is in it |
| Elongation at break Z | 2.4 (0.17) %p. 8: Elongation @ Break % (Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; std dev=0.17print settings0.010 in. (0.254 mm) layer heights on the F900 | not in the median: another value of this product is in it |
| Elongation at break XZ | 4.7 %p. 7: Elongation @ Break % | ASTM D638print settings0.010 in. (0.254 mm) layer heights on the F900 | not in the median: measured on a bar in another orientation |
| Elongation at break XZ | 6.0 %p. 8: Elongation @ Break % (Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16, XZ Orientation) | ASTM D638print settingsTable 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16 | not in the median: measured on a bar in another orientation |
| Elongation at break XZ | 9.8 (1.0) %p. 8: Elongation @ Break % (Table 7. Mechanical Properties of PC-ABS Red, F900, T16, XZ Orientation) | ASTM D638As the sheet prints it: ASTM D638; std dev=1.0print settings0.010 in. (0.254 mm) layer heights on the F900 | not in the median: measured on a bar in another orientation |
| Elongation at yield Z | 2.0 (0.17) %p. 8: Elongation @ Yield % (Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16) | ASTM D638As the sheet prints it: ASTM D638; std dev=0.17 | listed under other properties |
| Elongation at yield Z | 2.1 (0.030) %p. 8: Elongation @ Yield % (Table 7. Mechanical Properties of PC-ABS Red, F900, T16) | ASTM D638As the sheet prints it: ASTM D638; std dev=0.030print settings0.010 in. (0.254 mm) layer heights on the F900 | listed under other properties |
| Elongation at yield XZ | 3.0 %p. 7: Elongation @ Yield % (Table 4. PC-ABS Mechanical Properties (F900 - T16 Tip), XZ Orientation) | ASTM D638print settingsprinter=F900; tip=T16 | listed under other properties |
| Elongation at yield XZ | 3.2 %p. 8: Elongation @ Yield % (Table 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16, XZ Orientation) | ASTM D638print settingsTable 6. Mechanical Properties of PC-ABS Red, Fortus 450mc, T16 | listed under other properties |
| Elongation at yield XZ | 3.3 (0.070) %p. 8: Elongation @ Yield % (Table 7. Mechanical Properties of PC-ABS Red, F900, T16, XZ Orientation) | ASTM D638As the sheet prints it: ASTM D638; std dev=0.070print settings0.010 in. (0.254 mm) layer heights on the F900 | listed under other properties |
| Flexural modulus XZ | 1.86 (0.14) GPap. 7: Modulus (XZ) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 1.68 (0.069) GPap. 7: Modulus (ZX) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 46.2 (2.0) MPap. 7: Strength @ Break (ZX; ASTM D790, Procedure A) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; endpoint=break | not in the median: measured on a bar in another orientation |
| Flexural elongation at break ZX | 3.51 (0.30) %p. 7: Strain @ Break | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 | listed under other properties |
| Flexural stress at conventional deflection XZ | 61.9 (1.2) MPap. 7: Strength @ 5% Strain | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; strain=5% | listed under other properties |
| Izod impact strength XZ | 241 (40) J/mp. 7: Notched (XZ) | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength ZX | 34.0 (6.0) J/mp. 7: Notched (ZX) | ASTM D256, ASTM D4812 | not in the median: in J/m |
| Izod impact strength XZ | 655 (127) J/mp. 7: Unnotched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16 | not in the median: in J/m |
| Izod impact strength ZX | 101 (23) J/mp. 7: Unnotched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16 | not in the median: in J/m |
| Compression strength XZ | 96.5 (3.6) MPap. 7: Yield Strength (XZ; ASTM D695) | ASTM D695As the sheet prints it: ASTM D695; printer=F900; tip=T16; endpoint=yield | |
| Compression strength ZX | 172 (13) MPap. 7: Yield Strength (ZX; ASTM D695) | ASTM D695As the sheet prints it: ASTM D695; printer=F900; tip=T16; endpoint=yield | |
| HDT XY, at 0.45 MPa | 117.9 °Cp. 5: HDT @ 66 psi | ASTM D648As the sheet prints it: 66 psi ASTM D648print settingsTable 3. PC-ABS Physical Properties · XY column | in the median |
| HDT XY, at 1.8 MPa | 107.5 °Cp. 5: HDT @ 264 psi | ASTM D648As the sheet prints it: 264 psi ASTM D648print settingsTable 3. PC-ABS Physical Properties · XY column | in the median |
| HDT XZ, at 0.45 MPa | 126.1 °C (259.0 °F) | ASTM D648As the sheet prints it: ASTM D648 Method B; 66 psi | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 125.0 °C (257.1 °F)p. 5: Molded HDT @ 66 psi | moulded bar (resin supplier's value), ASTM D648As the sheet prints it: ASTM D648 Method B; 66 psi | not in the median: measured on a moulded bar |
| HDT XZ, at 1.8 MPa | 112.0 °C (233.6 °F) | ASTM D648As the sheet prints it: ASTM D648 Method B; 264 psi | not in the median: measured on a bar in another orientation |
| HDT at 1.8 MPa | 102.9 °C (217.2 °F)p. 5: Molded HDT @ 264 psi | moulded bar (resin supplier's value), ASTM D648As the sheet prints it: ASTM D648 Method B; 264 psi | not in the median: measured on a moulded bar |
| Glass transition temperature | 105.3 °C (221.6 °F)p. 5: Tg | specimen not stated, ASTM D7426As the sheet prints it: ASTM D7426 Inflection Point | in the median |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- No temperature statedStratasys, PC-ABS Data Sheetp. 3: Build Sheet
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
PC-ABS is suitable for a variety of applications that include prototyping, tooling and low-volume production.
Stratasys, PC-ABS Data Sheetp. 2 - Benefits
Choose PC-ABS when you need the strength of PC but the impact resistance of ABS.
Stratasys, PC-ABS Data Sheetp. 2
Nanovia PC-ABS RailStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa2.62Charpy notched, kJ/m²45HDT 0.45, °C111HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–290Bed, °C120Chamber, °C90Drying, °C, h604 h
Nanovia PC-ABS RailNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PC-ABS Rail : EN 45545-2 : Nanovia6 values | |||
| Tensile modulus orientation not stated | 2620 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: set apart (never used to pass), no stated orientation |
| Flexural modulus orientation not stated | 2610 MPap. 1: Young’s modulus (Flexural) | ISO 178 | in the median |
| Charpy impact strength | 45 kJ/m²p. 1: Charpy (Notched) | ISO 179As the sheet prints it: ISO 179/1eA | in the median |
| Izod impact strength | 20 kJ/m²p. 1: IZOD (Notched) | ISO 180As the sheet prints it: ISO 180/1A | in the median |
| HDT at 0.45 MPa | 111 °Cp. 1: HDT | ASTM D648As the sheet prints it: D648 0.45 MPa | in the median |
| Density | 1.21 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 260–290 °Cown data sheet
- Bed
- 120 °Cown data sheet
- Heated chamber
- 90 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260 – 290 °C; Bed 120 °C; Chamber 90 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PC-ABS Rail : EN 45545-2 : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal)
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
can be used to create secure componants for enclosed spaces.
Nanovia, Nanovia PC-ABS Rail : EN 45545-2 : Nanoviap. 1 - Good for
Examples: arm rests, hooks, storage racks, hinges, electrical enclosures etc…
Nanovia, Nanovia PC-ABS Rail : EN 45545-2 : Nanoviap. 1 - Benefits
Easier to print than a native polycarbonate
Nanovia, Nanovia PC-ABS Rail : EN 45545-2 : Nanoviap. 1 - Benefits
Very good fire resistance
Nanovia, Nanovia PC-ABS Rail : EN 45545-2 : Nanoviap. 1 - Pitfalls and limitations
For an outdoor usage, it’s recommended either paint or apply a protective UV coating, both polycabonate and ABS are sensitive to UV radiation, and might “yellow” or crack otherwise in the long term.
Nanovia, Nanovia PC-ABS Rail : EN 45545-2 : Nanoviap. 1
FormFutura ABSpro - Flame RetardantStrength XY, MPa65.1Strength Z, MPa—Modulus XY, GPa2.44Charpy notched, kJ/m²12.5IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg112Nozzle, °C240–260Bed, °C100–110Chamber, °C—Drying, °C, h—
FormFutura ABSpro - Flame RetardantFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet ABSpro™ - Flame Retardant6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2440 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 65,1 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6,6 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 12,5 KJ/m²p. 1: Impact strength | ISO 180As the sheet prints it: ISO 180/A | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 110° C °Cp. 1: Viscat softening temp. | ISO 306As the sheet prints it: ISO 306; VST/A/50 (50° C/h, 10N) | |
| Density | 1.18 g/ccp. 1: Specific gravity | ISO 1183 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle ± 240 - 260° CFormFutura, Technical Data Sheet ABSpro™ - Flame Retardantp. 1: Recommended printing settings
- Nozzle ± 240 – 265° C; Bed ± 100 – 110° CFormFutura, ABSpro Flame Retardantp. 1: General printing guidelines
Price
112 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 112 CAD/kgFormFutura ABSpro Flame Retardant - 500g 1.75mm / Black (SKU FFTURA-APFR-175BLCK-00500)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (17)
- Good for
Flame Retardant is extremely suitable for printing mechanical parts with exceptional endurance properties.
FormFutura, Technical Data Sheet ABSpro™ - Flame Retardantp. 1 - Benefits
Flame Retardant is a professional high-performance and halogen free self-extinguishing filament which is engineered to meet the UL 94 V-0 flammability standards.
FormFutura, Technical Data Sheet ABSpro™ - Flame Retardantp. 1 - Precision and tolerance
Flame Retardant you can 3D print extremely strong and high gloss, self-extinguishing objects with a remarkable fine detail.
FormFutura, Technical Data Sheet ABSpro™ - Flame Retardantp. 1 - Benefits
ABSpro Flame Retardant is a PC-ABS 3D printer filament that meets the UL 94 V-0 standard.
FormFutura, ABSpro Flame Retardantp. 1 - Adhesion between layers
It 3D prints strong and self-extinguishing parts with superb interlayer bonding and high dimensional accuracy.
FormFutura, ABSpro Flame Retardantp. 1 - Benefits
High Speed Compatible 150mm/s
FormFutura, ABSpro Flame Retardantp. 1 - Benefits
These materials, while still suitable for traditional printers, have also been fully optimized for the new high speed 3D printing technology.
FormFutura, ABSpro Flame Retardantp. 1 - Benefits
ABSpro Flame Retardant is a professional, halogen free, self-extinguishing filament.
FormFutura, ABSpro Flame Retardantp. 1 - Benefits
It has been engineered to meet the UL 94 V-0 flammability standards.
FormFutura, ABSpro Flame Retardantp. 1 - Printing advice
Due to the flame retardant modifiers the filament can be printed at relatively low temperatures.
FormFutura, ABSpro Flame Retardantp. 1 - Benefits
Self-extinguishing flammability properties
FormFutura, ABSpro Flame Retardantp. 1 - Benefits
Engineered to meet UL 94 V-0 standards
FormFutura, ABSpro Flame Retardantp. 1 - Warping and shrinkage
Excellent dimensional stability
FormFutura, ABSpro Flame Retardantp. 1 - Adhesion between layers
Superb interlayer adhesion
FormFutura, ABSpro Flame Retardantp. 1 - Benefits
Halogen free
FormFutura, ABSpro Flame Retardantp. 1 - Warping and shrinkage
Because of the relative high percentage of added PolyCarbonate, ABSpro – Flame Retardant has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro – Flame Retardant.
FormFutura, ABSpro Flame Retardantp. 1 - Printing advice
When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.
FormFutura, ABSpro Flame Retardantp. 1
SIDDAMENT PC ABSStrength XY, MPa43.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C90–110Chamber, °C—Drying, °C, h80≥ 12 h
SIDDAMENT PC ABSSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PC ABS Technical Data Sheet8 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 43.5-45.5 Mpap. 1: Tensile strength ISO 527 Mpa | ISO 527 | in the median |
| Elongation at break orientation not stated | 24~26 %p. 1: Elongation at break | ISO 527 | in the median |
| Flexural modulus orientation not stated | 800-950 Mpaphysically implausiblep. 1: Flexural Modulus ISO 527 Mpa | ISO 527 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 71.5~74.5 Mpap. 1: Flexural Strength | ISO 178 | in the median |
| Izod impact strength orientation not stated | 43.5~44.5 KJ/m2p. 1: Impact Strength | ISO 180 | not in the median: notch not stated |
| Continuous service temperature | 130 ℃p. 1: Continuous Use Temperature | IEC 60216 | |
| Density | 1.14~1.15 g/cm3p. 1: Density | ISO 1183 | |
| Melt mass-flow rate | 19-22 g/10minp. 1: MFR(250°C/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 250°C/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for ≥ 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Drying It is recommended to dry the filament in a hot air oven at 80°C for at least 12 hoursSIDDAMENT, PC ABS Technical Data Sheetp. 1: Drying note
- Nozzle 240-260°C; Bed 90-110°C; Drying 55-65°C / 4-8 hoursSIDDAMENT, White PC-ABSp. 1: Print Settings
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Benefits
It has high temperature impact resistance and high temperature resistance, and has excellent electrochemical properties of ABS.
SIDDAMENT, PC ABS Technical Data Sheetp. 1 - Benefits
High toughness/high strength/high temperature resistance/plateable
SIDDAMENT, PC ABS Technical Data Sheetp. 1
Chemicals and environment (1)
- Post-processing: described in words
After the model is printed, it is recommended to dry it in an oven at 100 °C for 1~3 hours to increase the strength of the model.
SIDDAMENT, PC ABS Technical Data Sheetp. 1: Post-processing note
Nanovia PC-ABS V0Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa2.51Charpy notched, kJ/m²40HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–290Bed, °C120Chamber, °C90Drying, °C, h604 h
Nanovia PC-ABS V0Nanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanovia4 values | |||
| Tensile modulus orientation not stated | 2510 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: set apart (never used to pass), no stated orientation |
| Charpy impact strength | 40 kJ/m2p. 1: Charpy (notched) | ISO 179As the sheet prints it: ISO 179/1eA | in the median |
| Izod impact strength | 50 kJ/m2p. 1: Izod (notched) | no standard stated | in the median |
| Density | 1.18 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 260–290 °Cown data sheet
- Bed
- 120 °Cown data sheet
- Heated chamber
- 90 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260 – 290 °C; Bed 120 °C; Chamber 90 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanoviap. 1: Recommended printing settings: Extrusion temperature; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
this material is ideal for technically demanding environments that exceed regular ABS’s thermal limit.
Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanoviap. 1 - Good for
Ideal for the production of shock resistant component such as sports protections (knee / shin / elbow).
Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanoviap. 1 - Benefits
Great fire resistance V0
Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanoviap. 1 - Benefits
Non flammable V0 at 1.5 mm according to the UL94 norm
Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanoviap. 1 - Benefits
Nanovia PC-ABS V0 combines the strength of polycarbonate with the ease of printing of ABS, making polycarbonate printing accessible to a wide spectrum of 3D printers.
Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanoviap. 1 - Pitfalls and limitations
For an outdoor usage, it’s recommended either paint or apply a protective UV coating, both polycabonate and ABS are sensitive to UV radiation, and might “yellow” or crack otherwise in the long term.
Nanovia, Nanovia PC-ABS V0 : Demanding technical applications : Nanoviap. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.
Reference specimens and studies
A resin or study specimen, not a product you can buy.
Stratasys 310-20500 (PC-ABS)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
Stratasys 310-20500 (PC-ABS)Stratasys
A resin or study reference, not a product you can buy.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Rodrigues et al., Polymers 18(2), 302, Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)10 valuesUnless a row says otherwise: printed specimentested at Room temperatureprint settingsStratasys Fortus 450; XY; 0.254 mm layer; 100% infill; ±45° raster; nozzle 265°C, bed 110°C; ASTM D638-03 specimen ~5.2 mm thick; sinusoidal tension, 10 Hz, R=0.05; sigma_max=28.18 MPa, sigma_min=1.41 MPa, amplitude=13.39 MPa. | |||
| Fatigue life XY | 455 cyclesp. 8: Fatigue table specimen 1 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 13,927 cyclesp. 8: Fatigue table specimen 2 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 1,000,000 cyclesp. 8: Fatigue table specimen 3 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 256,682 cyclesp. 8: Fatigue table specimen 4 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 688,867 cyclesp. 8: Fatigue table specimen 5 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 964,381 cyclesp. 8: Fatigue table specimen 6 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 583,107 cyclesp. 8: Fatigue table specimen 7 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 441,289 cyclesp. 8: Fatigue table specimen 8 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 83,566 cyclesp. 8: Fatigue table specimen 9 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 35,769 cyclesp. 8: Fatigue table specimen 10 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
Print settings
No print settings on file for this product.