CPE-CF

3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
hardened nozzle
not published

How the numbers are worked out

colorFabb XT-CF20Strength XY, MPa56Modulus XY, GPa5.15Charpy notched, kJ/m²2.5HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg81Nozzle, °C240–260Bed, °C60–70Chamber, °C—Drying, °C, h806 h

colorFabb XT-CF20colorFabb

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet XT-CF209 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	5150 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250 ˚C nozzle temperature and 70˚C bed temperature.	in the median
Tensile strength (yield or break not stated) XY	56 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250 ˚C nozzle temperature and 70˚C bed temperature.	in the median
Elongation at break XY	2 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250 ˚C nozzle temperature and 70˚C bed temperature.	in the median
Flexural modulus XY	2700 MPap. 1: Flexural Modulus Flexural, ISO 178	ISO 178 print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250 ˚C nozzle temperature and 70˚C bed temperature.	not in the median: the only value of its test, shown as published
Flexural strength XY	70 MPap. 1: Flexural Strength Flexural, ISO 178	ISO 178 print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250 ˚C nozzle temperature and 70˚C bed temperature.	not in the median: the only value of its test, shown as published
Charpy impact strength XY	2.5 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179	ISO 179notched	not in the median: the only value of its test, shown as published
Izod impact strength	6 kJ/m2p. 1: Izod Impact Strength Izod Notch, ISO 180	moulded bar (resin supplier's value), ISO 180notched	not in the median: measured on a moulded bar
Density	1.4 g/cm3p. 1: Density ISO 1183	moulded bar (resin supplier's value), ISO 1183
Fibre content	20% carbon fibersp. 1: Fibre content	specimen not stated, no standard stated

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 60–70 °Cown data sheet
Heated chamber: not stated
Drying: 80 °C for 6 hown data sheet
Hardened nozzle: not stated

Its 3 print profiles, in the documents' words

Nozzle 240-260 °C; Bed 60-70 °CcolorFabb, Technical datasheet XT-CF20p. 2: Recommended printing settings
Nozzle 240-260C; Bed 60-70CcolorFabb, XT-CF20 – Carbon Fiber Reinforced PETG Filament | colorFabbp. 1: Advised 3D printing temperature; p. 1: Advised Heated bed
Drying 80 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)

Price

81.3 CAD/kgthe median of its 2 regular prices in the sample

2 listings

DigitMakers: 56 CAD/kgcolorFabb XT CF20 1.75mm 750G - Black (SKU CFABB-COPOLY-CF-175-750G-BLK)in its price; seen 30 Sep 2026
MakerWiz: 107 CAD/kgColorFabb XT-CF20 (750 g) / 1.75 mm (SKU 22000091)in its price; seen 30 Sep 2026

Its 4 documents

What the maker says (4)

Good forThis is the perfect filament for parts which need high stiffness.colorFabb, Technical datasheet XT-CF20p. 1
Surface finish3D prints with colorFabb XT-Cf20 have a beautiful matte surface finish when printed.colorFabb, Technical datasheet XT-CF20p. 1
Printing adviceFor best part strength, try to print with the least amount of fan cooling possible.colorFabb, Technical datasheet XT-CF20p. 2
Printing adviceFor better details and overhangs, increase fan speed.colorFabb, Technical datasheet XT-CF20p. 2

Spectrum pctg cf10Strength XY, MPa70Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C78HDT 1.8, °C68Price, CAD/kg—Nozzle, °C250–270Bed, °C≥ 50Chamber, °CnoneDrying, °C, h654 h

Spectrum pctg cf10Spectrum

Published values

Property	As published	Conditions	On the Overview
Spectrum, pctg cf1010 valuesThe same values also in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.Unless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	70 MPap. 1: Tensile Strength at Yield	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	65 MPap. 1: Tensile Strength at Break	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	5,00%p. 1: Elongation at Break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Impact strength, test unclear	45kJ/m2p. 1: Izod Impact Strenght, Unnotched @ 23°C	ISO 179 As the sheet prints it: ISO 179-1eU tested at 23°CWhich test: probably Izod	listed under other properties
Impact strength, test unclear	4kJ/m2p. 1: Izod Impact Strenght, Notched @ 23°C	ISO 179 As the sheet prints it: ISO 179-1eU (as printed) tested at 23°CWhich test: probably Izod	listed under other properties
HDT at 0.45 MPa	78°Cp. 1: Heat Distortion Temperature @ 0.455MPaalso in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO	no standard named As the sheet prints it: 0.455 MPa (standard not stated)	in the median
HDT at 1.8 MPa	68°Cp. 1: Heat Distortion Temperature @ 1.820 MPa	no standard named As the sheet prints it: 1.820 MPa (standard not stated)	in the median
Vicat softening temperature	77°Cp. 1: VICAT Softening Temperature	no standard stated
Density	1.28 g/cm3p. 1: Density	ASTM D792
Fibre content	10% carbon fiberp. 1: Fibre content	no standard stated
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value
Vicat softening temperature	89°Cp. 4: VICAT	no standard stated

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: at least 50 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 65 °C for 4 hown data sheet
Hardened nozzle: neededown data sheet

Its 4 print profiles, in the documents' words

Nozzle 250-270°C; Bed > 50°CSpectrum, pctg cf10Recommended printing settings
No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Drying 65°C, 4h; RecommendedSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying

Price

Not in the price sample.

2 listings: 2 with no regular price per kilogram recorded

3D Printing Canada: 104 per kg, sale priceCarbon Fiber CF10 - Spectrum Premium PCTG Filament - 1.75mm, 0.5kg / Default Titlenot used: no regular price per kilogram recorded; seen 10 Sep 2026
3D Printing Canada: 75 per kg, sale priceCarbon Fiber CF10 - Spectrum Premium PCTG Filament - 1.75mm, 1kg (SKU 67bbc4b9be125)not used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 5 documents

What the maker says (7)

BenefitsThe carbon fibres used give the filament an extremely high stiffness, while reducing the brittle fracture typical for other PETG-based carbon composites.Spectrum, pctg cf10p. 1
Warping and shrinkageThe use of carbon fibres increases the thermal resistance of the filament, further reduces shrinkage and gives the characteristic “carbon” matt appearance to the printed models.Spectrum, pctg cf10p. 1
Precision and tolerancehigh dimensional accuracy of the printed elementsSpectrum, pctg cf10p. 1
Surface finishcarbon, matt printed surfaceSpectrum, pctg cf10p. 1
Moisture sensitivityDry box not necessarySpectrum, pctg cf10p. 1
Nozzle wearRuby or hardened nozzle recommendedSpectrum, pctg cf10p. 1
Benefits10% Carbon fiber reinforced, high stiffness and tensile strength, good impact and chemical resistanceSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20

Fillamentum CPE CF112 CarbonStrength XY, MPa52.4Modulus XY, GPa2.2Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C70–85Chamber, °CnoneDrying, °C, h753 h

Fillamentum CPE CF112 CarbonFillamentum

Published values

Property	As published	Conditions	On the Overview
Fillamentum, CPE CF112 Carbon7 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2200 MPap. 1: Tensile modulus	ISO 527 As the sheet prints it: ISO 527; 0.15 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	52.4 MPap. 1: Tensile yield strength	ISO 527 As the sheet prints it: ISO 527; 50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	37.7 MPap. 1: Tensile break strength	ISO 527 As the sheet prints it: ISO 527; 50 mm/min	not in the median: another value of this product is in it
Elongation at break orientation not stated	8.0 %p. 1: Elongation at break	ISO 527 As the sheet prints it: ISO 527; 50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength orientation not stated	105.9 kJ/m²p. 1: Charpy strength unnotched	ISO 179 As the sheet prints it: ISO 179; unnotched tested at 25°C	not in the median: unnotched
Hardness	77 Shore Dp. 1: Hardness	ISO 7619	in the median
Density orientation not stated	1.16 g/cm³p. 1: Density	no standard stated
Fillamentum, 3D Printing Guide: Fillamentum CPE CF112 Carbon1 value
Fibre content	12.5 % of milled carbon fibersp. 1: Fibre content	no standard stated

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 70–85 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 75 °C for 3 hown data sheet
Hardened nozzle: neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 250-270°C; Bed 70-85°CFillamentum, CPE CF112 CarbonRecommended printing settings
Nozzle 250-270 °C; Bed 70-85 °C; Chamber Not required (heated chamber / enclosure not needed); Drying 75 °C for 3 hFillamentum, 3D Printing Guide: Fillamentum CPE CF112 CarbonPrinting parameters; Nozzle
Drying 75 °C; minimum drying time 5 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row CPE CF112 CARBON; own minimum-time/temperature/need columns, with p1 restrictions

Price

Not in the price sample.

Its 4 documents

What the maker says (9)

Good forThis material is optimal for applications with long-term load.Fillamentum, CPE CF112 Carbonp. 1
BenefitsIt has higher wear resistance, heat distortion temperature, hardness and chemical resistance in comparison with CPE HG100.Fillamentum, CPE CF112 Carbonp. 1
Surface finishThe objects have nice smooth surface.Fillamentum, CPE CF112 Carbonp. 1
Adhesion between layersThe contained fibres ensure functionality, great printability, dimensional stability and layer adhesion.Fillamentum, CPE CF112 Carbonp. 1
Nozzle wearIt means that it will accelerate the nozzle-wear of brass nozzles faster than unfilled filaments.Fillamentum, CPE CF112 Carbonp. 1
Nozzle wearThe hardened steel nozzles are recommended.Fillamentum, CPE CF112 Carbonp. 1
Nozzle wearThe CPE CF112 Carbon filament has abrasive properties.Fillamentum, CPE CF112 Carbonp. 1
Printing adviceUse of adhesive is necessary to prevent damage of the pad!Fillamentum, CPE CF112 Carbonp. 1
Printing adviceHigher part cooling fan speed is recommended only for supports, bridges and overhangs.Fillamentum, CPE CF112 Carbonp. 1

Chemicals and environment (3)

Application notes: described in wordsIt may be used for production of electrical and electronic equipment.Fillamentum, CPE CF112 Carbonp. 1: Description, electrical/electronic use sentence
Food contact claims: described in wordsManufacturer does not recommend food-contact use.Fillamentum, CPE CF112 CarbonFood contact
Organic solvent resistance: described in wordsAcids, alkalis and alcohols: good resistance at25°C. Water, acetone, oils, greases, car fluids and ozone: medium to low at25°C. Concentrations and durations not specified.Chemical exposureFillamentum, CPE CF112 CarbonChemical exposure

Not published by any product: tensile strength (Z).

Values are for the colour each sheet tested; pigment can change them.