CPE

6 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
not published

How the numbers are worked out

Fiberlogy CPE HTStrength XY, MPa52Modulus XY, GPa1.5Charpy notched, kJ/m²—HDT 0.45, °C100HDT 1.8, °C85Price, CAD/kg—Nozzle, °C260–280Bed, °C110–120Chamber, °CnoneDrying, °C, h804 h

Fiberlogy CPE HTFiberlogy

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy CPE HT14 values
Tensile modulus orientation not stated	1500 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	44 MPap. 1: Tensile Strength @ Yield	ISO 527	not in the median: another value of this product is in it
Tensile break strength orientation not stated	52 MPap. 1: Tensile Strength @ Break ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	200 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	7 %p. 1: Elongation @ Yield ISO 527 %	ISO 527	listed under other properties
Flexural modulus orientation not stated	1550 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	62 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	92 kJ/m²physically implausiblep. 1: Izod Impact Strength (Notched) @ 23°C	ISO 180tested at 23 °C	not in the median: physically implausible as published
HDT at 0.45 MPa	100 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	85 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	110 °Cp. 1: Glass Transition Temperature Tg DSC °C	no standard stated	in the median
Vicat softening temperature	110 °Cp. 1: Vicat Softening Temperature ISO 306 °C	ISO 306
Melting temperature	250 °Cp. 1: Melting Temperature Tm DSC °C	DSC As the sheet prints it: Tm DSC
Continuous service temperature	95 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C	no standard named As the sheet prints it: UL 746

Fiberlogy, CPE HT – S2 Filament9 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1548 MPap. 1: Tensile modulus of elasticity	ISO 527	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	43 MPap. 1: Tensile strength at yield	ISO 527	not in the median: another value of this product is in it
Tensile break strength orientation not stated	58 MPap. 1: Tensile strength at break	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	185%p. 1: Elongation at break	ISO 527	not in the median: another value of this product is in it
Flexural modulus orientation not stated	1,495 MPap. 1: Flexural modulus	ISO 178	not in the median: another value of this product is in it
Flexural strength orientation not stated	59 MPap. 1: Flexural strength	ISO 178	not in the median: another value of this product is in it
Izod impact strength orientation not stated	93 kJ/m²physically implausiblep. 1: Izod impact strength (notched) @ 23°C	ISO 180tested at 23°C	not in the median: physically implausible as published
HDT at 0.45 MPa	99°Cp. 1: Heat deflection temperature @ 0.45 MPa	printed specimen (implied by the document); set apart, as the same figure on a better document of the product is, ASTM D648 As the sheet prints it: ASTM D648; 0.45 MPa	not in the median: another value of this product is in it
Density	1.18 g/cm³p. 1: Density	no standard stated

Print settings

Nozzle: 260–280 °Cown data sheet
Bed: 110–120 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 80 °C for 4 hown data sheet
Hardened nozzle: not stated

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, CPE HT – S2 Filament.

Its 2 print profiles, in the documents' words

Nozzle 260°C - 280°C; Bed 110°C - 120°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy CPE HTp. 1: Recommended printing settings
Nozzle 260–280°C; Bed 120°C; Drying 80°C / 4 hoursFiberlogy, CPE HT – S2 Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Good forIt is a cost-effective, durable, and versatile solution, ideal for industrial and laboratory applicationsFiberlogy, CPE HT – S2 Filamentp. 1

colorFabb XTStrength XY, MPa55Modulus XY, GPa1.85Charpy notched, kJ/m²5HDT 0.45, °C70HDT 1.8, °C62Price, CAD/kg63Nozzle, °C240–260Bed, °C60–70Chamber, °C—Drying, °C, h656 h

colorFabb XTcolorFabb

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet colorFabb_XT11 valuesThe same values also in colorFabb, Technical datasheet colorFabb_XT.Unless a row says otherwise: printed specimen
Tensile modulus orientation not stated	1900 MPap. 1: Tensile Modulus MPa	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	50 MPap. 1: Tensile Stress @ Yield MPa	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Tensile break strength orientation not stated	28 MPap. 1: Tensile Stress @ Break MPa	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Elongation at break orientation not stated	110 %p. 1: Elongation @ Break %	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Elongation at yield orientation not stated	5 %p. 1: Elongation @ Yield %	ASTM D638 As the sheet prints it: D 638	listed under other properties
Flexural modulus orientation not stated	2100 MPap. 1: Flexural Modulus MPaalso in colorFabb, Technical datasheet colorFabb_XT	ASTM D790 As the sheet prints it: D 790	in the median
Izod impact strength	95 J/mp. 1: Izod Impact strength, notched @ 23 °C J/malso in colorFabb, Technical datasheet colorFabb_XT	ASTM D256 As the sheet prints it: 23 °C D 256 tested at 23°C	not in the median: in J/m
Hardness	108 Rockwell Rp. 1: Rockwell Hardness, R Scale -	ASTM D785 As the sheet prints it: D 785
HDT at 0.45 MPa	70 °Cp. 1: Deflection Temperature @ 0.455 MPa °C	ASTM D648 As the sheet prints it: 0.455 MPa D 648	in the median
HDT at 1.8 MPa	62 °Cp. 1: Deflection Temperature @ 1.82 MPa °C	ASTM D648 As the sheet prints it: 1.82 MPa D 648	in the median
Density	1,27 g/cm3p. 1: Density g/cm3also in colorFabb, Technical datasheet colorFabb_XT	ASTM D792 As the sheet prints it: D 792
colorFabb, Technical datasheet colorFabb_XT5 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	1850 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250˚C nozzle temperature and 70˚C bed temperature.	in the median
Tensile strength (yield or break not stated) XY	55 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250˚C nozzle temperature and 70˚C bed temperature.	in the median
Elongation at break XY	6.2 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 250˚C nozzle temperature and 70˚C bed temperature.	in the median
Charpy impact strength XY	5 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179	ISO 179notched	in the median
HDT at 0.45 MPa	65 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75	moulded bar (resin supplier's value), ISO 75 As the sheet prints it: HDT B ISO 75	not in the median: measured on a moulded bar

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 60–70 °Cown data sheet
Heated chamber: not stated
Drying: 65 °C for 6 hown data sheet
Hardened nozzle: not stated

Its 4 print profiles, in the documents' words

Nozzle 240-260 °C; Bed 60-70 °CcolorFabb, Technical datasheet colorFabb_XTp. 2: Recommended printing settings
Nozzle 240 – 260 °C; Bed 60 – 70 °CcolorFabb, Technical datasheet colorFabb_XTp. 1: Recommended printing settings; p. 1: Bed surface / modification
Nozzle 240-260C; Bed 60-70CcolorFabb, XT CLEARp. 1: Advised 3D printing temperature; p. 1: Advised Heated bed; p. 1: Build platform
Drying 65 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)

Price

62.7 CAD/kgthe median of its 2 regular prices in the sample

2 listings

DigitMakers: 32 CAD/kgcolorFabb XT Co-Polyester - 1.75mm 750g (Various Colors) / Black (SKU CFABB-COPOLY-175-750G-BLK)in its price; seen 30 Sep 2026
MakerWiz: 93.3 CAD/kgColorFabb XT (750 g) - 13 Colours / Black / 1.75 mm (SKU 22000071-80)in its price; seen 30 Sep 2026

Its 5 documents

What the maker says (8)

Odour and emissionsLow odorcolorFabb, XT CLEARp. 1
BenefitsThe styrene free formulation is EU and FDA Food Contact Compliant (for the raw materials), BPA free and will allow a user to produce 3D functional product safely.colorFabb, Technical datasheet colorFabb_XTp. 1
Printing adviceFor the best part strength, it is recommended to print with the least amount of fan cooling.colorFabb, Technical datasheet colorFabb_XTp. 2
Printing adviceFor better details in the prints, increase the fan speed.colorFabb, Technical datasheet colorFabb_XTp. 2
BenefitsHigh strength and very high toughnesscolorFabb, Technical datasheet colorFabb_XTp. 1
BenefitsHigh Tg / improved temp. resistance, Styrene free formulation, FDA food contact compliance, BPA (Bisphenol A ) free formulation.colorFabb, Technical datasheet colorFabb_XTp. 1
Odour and emissionsOdor Neutral processingcolorFabb, Technical datasheet colorFabb_XTp. 1
Printing adviceAfter printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.colorFabb, Technical datasheet colorFabb_XTp. 1

Fiberlogy CPE ANTIBACStrength XY, MPa58Modulus XY, GPa1.55Charpy notched, kJ/m²—HDT 0.45, °C99HDT 1.8, °C85Price, CAD/kg—Nozzle, °C260–280Bed, °C110–120Chamber, °CnoneDrying, °C, h804 h

Fiberlogy CPE ANTIBACFiberlogy

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy CPE ANTIBAC11 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	1548 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	43 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Tensile break strength orientation not stated	58 MPap. 1: Tensile Strength @ Break ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	185 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	7 %p. 1: Elongation @ Yield ISO 527 %	specimen not stated, ISO 527	listed under other properties
Flexural modulus orientation not stated	1495 MPap. 1: Flexular Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	59 MPap. 1: Flexular Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	93 kJ/m2physically implausiblep. 1: Izod Impact Strength (Notched) @ 23℃ ISO 180 kJ/m2	specimen not stated, ISO 180 As the sheet prints it: 23℃ ISO 180 tested at 23°C	not in the median: physically implausible as published
HDT at 0.45 MPa	99 °Cp. 1: Heat Distortion Temperature @ 0.455 MPa ASTM D648 °C	ASTM D648 As the sheet prints it: 0.455 MPa ASTM D648	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	85 °Cp. 1: Heat Distortion Temperature @ 1.82 MPa ASTM D648 °C	ASTM D648 As the sheet prints it: 1.82 MPa ASTM D648	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.18 g/cm3p. 1: Specific Density ASTM D792 g/cm3	specimen not stated, ASTM D792
Fiberlogy, CPE HT+Ag Antibac Filament1 value
Izod impact strength orientation not stated	93 kJ/m²physically implausiblep. 1: Izod impact strength (notched) @ 23°C	ISO 180tested at 23 °C	not in the median: physically implausible as published

Print settings

Nozzle: 260–280 °Cown data sheet
Bed: 110–120 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 80 °C for 4 hown data sheet
Hardened nozzle: not stated

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, CPE HT+Ag Antibac Filament.

Its 2 print profiles, in the documents' words

Nozzle 260°C - 280°C; Bed 110°C - 120°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy CPE ANTIBACp. 1: Recommended printing settings
Nozzle 260–280°C; Bed 120°C; Drying 80°C / 4 hoursFiberlogy, CPE HT+Ag Antibac Filamentp. 1: Exact product printing block; nozzle, bed, plate, enclosure and drying source-specific guidance

Price

Not in the price sample.

Its 3 documents

What the maker says (2)

Benefitsthe material effectively inhibits the growth of microorganisms on the surface of printed objects, as confirmed by microbiological testsFiberlogy, CPE HT+Ag Antibac Filamentp. 1
BenefitsFiberlogy CPE ANTIBAC is a modern 3D printing filament that combines high mechanical and thermal strength with unique antibacterial properties. Thanks to the use of silver nanoparticles, the material effectively inhibits the growth of microorganisms on the surface of printed objects, as confirmed by microbiological tests. Fiberlogy CPE ANTIBAC demonstrated a complete (100%) reduction of E. coli and over a 92% reduction of Staphylococcus aureus in the initial test, and in repeat tests, its effectiveness remained at 100% and 97%, respectively.Fiberlogy, CPE HT+Ag Antibac Filamentp. 1: exact product paragraph, source text line 40

Fillamentum CPE HG100Strength XY, MPa48Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C80HDT 1.8, °C—Price, CAD/kg—Nozzle, °C255–275Bed, °C70–85Chamber, °CnoneDrying, °C, h603–4 h

Fillamentum CPE HG100Fillamentum

Published values

Property	As published	Conditions	On the Overview
Fillamentum, CPE HG100 Datasheet12 valuesUnless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	47 MPaMechanical properties: Tensile strength (at yield)	ASTM D638 As the sheet prints it: ASTM D638, at yield, 50 mm/min	not in the median: another value of this product is in it
Tensile break strength orientation not stated	48 MPaMechanical properties: Tensile strength (at break)	ASTM D638 As the sheet prints it: ASTM D638, at break, 50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	150 %Mechanical properties: Elongation at break	ASTM D638 As the sheet prints it: ASTM D638, 50 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1860 MPaMechanical properties: Flexural modulus	ASTM D790 As the sheet prints it: ASTM D790, 1.27 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	71 MPaMechanical properties: Flexural strength	ASTM D790 As the sheet prints it: ASTM D790, 1.27 mm/min	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	no break J/mMechanical properties: Izod impact strength	ASTM D256tested at 23 °Cnotched	not in the median: no number given
Hardness orientation not stated	115 R-Scale Rockwell RPhysical properties: Rockwell hardness	ASTM D785
HDT at 0.45 MPa	80 °CThermal properties: Heat distortion temperature	ASTM D648 As the sheet prints it: ASTM D648, 0.455 MPa	in the median
Glass transition temperature	90 °CThermal properties: Glass transition temperature	ASTM D1525	in the median
Density	1,25 g/cm3 g/cm³Physical properties: Material density	ASTM D792
Melt mass-flow rate	1,6 g/10 minPhysical properties: Melt flow index (230 °C, 1,2 kg)	ASTM D1238 As the sheet prints it: ASTM D1238; 230 °C, 1.2 kg
Melt mass-flow rate	5,9 g/10 minPhysical properties: Melt flow index (230 °C, 3,8 kg)	ASTM D1238 As the sheet prints it: ASTM D1238; 230 °C, 3.8 kg

Print settings

Nozzle: 255–275 °Cown data sheet
Bed: 70–85 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 60 °C for 3–4 hown data sheet
Hardened nozzle: not stated

Its 4 print profiles, in the documents' words

No temperature statedFillamentum, CPE HG100 | FillamentumRecommended printing settings
Nozzle 255-275 °C; Bed 70-85 °C; Chamber Not required (heated chamber / enclosure not needed); Drying 75 °C for 4 hFillamentum, 3D Printing Guide: Fillamentum CPE HG100Printing parameters
Drying 75 °C; minimum drying time 5 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row CPE HG100; own minimum-time/temperature/need columns, with p1 restrictions
Nozzle 255–275 °C; Bed 70–85 °C; Drying 60 °C, 3–4 hoursFillamentum, CPE HG100 Datasheetp. 1: Print temperature; p. 1: Hot pad; p. 1: Conditions to re-dry

Price

Not in the price sample.

Its 5 documents

What the maker says (10)

Good forFor all the colours we guarantee the certificate for food contact.Fillamentum, CPE HG100 Datasheetp. 1
BenefitsThe material is durable and tough.Fillamentum, CPE HG100 Datasheetp. 1
BenefitsThis co-polyester contains bio-based monomer and can be recycled.Fillamentum, CPE HG100 Datasheetp. 1
Warping and shrinkageless shrinkage as compared with ABS.Fillamentum, CPE HG100 Datasheetp. 1
Surface finishFilament has great optical properties, very high gloss and clarity.Fillamentum, CPE HG100 Datasheetp. 1
Surface finishThe transparency and strength are also preserved in thin-wall prints from transparent colours.Fillamentum, CPE HG100 Datasheetp. 1
Moisture sensitivityIf stringing occurs, the filament is too moist.Fillamentum, CPE HG100 Datasheetp. 1
Moisture sensitivityMoisture sensitive! Keep in protective bag.Fillamentum, CPE HG100 Datasheetp. 1
Odour and emissionsAnother advantage of the material is less odor produced during the printingFillamentum, CPE HG100 Datasheetp. 1
Printing adviceUse of adhesive is necessary to prevent damage of the pad!Fillamentum, CPE HG100 Datasheetp. 1

Spectrum PET-G HT100Strength XY, MPa52Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C100HDT 1.8, °C—Price, CAD/kg66Nozzle, °C250–280Bed, °C100–110Chamber, °C—Drying, °C, h—

Spectrum PET-G HT100Spectrum

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET PET-G HT10010 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile yield strength orientation not stated	43 MPap. 1: Tensile Stress at Yield	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Tensile break strength orientation not stated	52 MPap. 1: Tensile Stress at Break	ASTM D638 As the sheet prints it: D 638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	210,00 %p. 1: Elongation at Break	ASTM D638 As the sheet prints it: D 638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	7,00 %p. 1: Elongation at Yield	ASTM D638 As the sheet prints it: D 638	listed under other properties
Flexural modulus orientation not stated	1575 MPap. 1: Flexural Modulus	ASTM D790 As the sheet prints it: D 790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	64 MPap. 1: Flexural Strength	ASTM D790 As the sheet prints it: D 790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	860 J/mp. 1: Izod Impact Strength, Notched @ 23°C	ASTM D256 As the sheet prints it: 23°C D 256 tested at 23°C	not in the median: in J/m
Hardness	111 Rockwell Rp. 1: Rockwell Hardness, R Scale	specimen not stated, ASTM D785 As the sheet prints it: D 785
HDT	100 °Cp. 1: Heat Deflection Temperature	ASTM D648 As the sheet prints it: D 648	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.18 g/cm3p. 1: Specific Gravity	specimen not stated, ASTM D792 As the sheet prints it: D 792
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value
HDT at 0.45 MPa	94°Cp. 5: HDT B	no standard named As the sheet prints it: method=B	not in the median: another value of this product is in it

Print settings

Nozzle: 250–280 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 250-280°C; Bed 100-110°CSpectrum, TECHNICAL DATA SHEET PET-G HT100p. 1: Recommended printing settings; p. 1: Nozzle note
Nozzle 250-280 °C; Bed 100-110 °C; Chamber recommended for larger printsSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 5: Nozzle temp. [°C]; p. 5: Bed temp. [°C]; p. 5: Closed chamber for printing; p. 5: Dry box recommended; p. 5: Ruby or hardened nozzle recommended; p. 5: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended

Price

66 CAD/kgits one regular price in the sample

1 listing

3D Printing Canada: 66 CAD/kgTransparent Blue - Spectrum PET-G HT100 Filament - 1.75mm, 1kg (SKU 67bbb9e8ea1da)in its price; seen 30 Sep 2026

Its 4 documents

What the maker says (10)

Warping and shrinkagehigh dimensional stabilitySpectrum, TECHNICAL DATA SHEET PET-G HT100p. 1
Precision and toleranceExcellent dimension stability allows printing with accurate dimensions, which is particularly important for projects consist-ing of many different elements.Spectrum, TECHNICAL DATA SHEET PET-G HT100p. 1
Surface finishclarity and glossSpectrum, TECHNICAL DATA SHEET PET-G HT100p. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET PET-G HT100p. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET PET-G HT100p. 1
Odour and emissionslow odourSpectrum, TECHNICAL DATA SHEET PET-G HT100p. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET PET-G HT100p. 1
BenefitsImproved temperature resistance, excellent dimension stability & toughness, high mechanical strength, chemical resistance, low odourSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21
Warping and shrinkageexcellent dimension stabilitySpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21
BenefitsImproved temperature resistance, excellent dimension stability & toughness, high mechanicalSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3

colorFabb HTStrength XY, MPa50Modulus XY, GPa1.5Charpy notched, kJ/m²6.4HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C100–120Chamber, °C—Drying, °C, h656 h

colorFabb HTcolorFabb

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet colorFabb_HT11 values
Tensile modulus XY	1500 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 270 ˚C nozzle temperature and 110˚C bed temperature.	in the median
Tensile strength (yield or break not stated) XY	50 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 270 ˚C nozzle temperature and 110˚C bed temperature.	in the median
Tensile strength (yield or break not stated) orientation not stated	43 MPap. 1: Tensile Strength Tensile, ASTM D638	ASTM D638	not in the median: measured on a moulded bar
Elongation at break XY	26 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 270 ˚C nozzle temperature and 110˚C bed temperature.	in the median
Elongation at break orientation not stated	210 %p. 1: Elongation at break Tensile, ASTM D638	ASTM D638	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	1575 MPap. 1: Flexural Modulus Flexural, ASTM D790	ASTM D790	not in the median: measured on a moulded bar
Charpy impact strength XY	6.4 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179	ISO 179notched	in the median
Izod impact strength	860 J/mp. 1: Izod Impact Strength	ASTM D256notched	not in the median: in J/m
HDT at 0.45 MPa	94 °Cp. 1: Thermal Properties: Heat Deflection Temp. HDT @0.455 MPA	ASTM D648 As the sheet prints it: ASTM D648, 0.455 MPa	not in the median: measured on a moulded bar
HDT at 1.8 MPa	81 °Cp. 1: Thermal Properties: Heat Deflection Temp. HDT @1.82 MPA	ASTM D648 As the sheet prints it: ASTM D648, 1.82 MPa	not in the median: measured on a moulded bar
Density	1.2 g/cm3p. 1: Density ISO 1183	ISO 1183

Print settings

Nozzle: 250–280 °Cown data sheet
Bed: 100–120 °Cown data sheet
Heated chamber: not stated
Drying: 65 °C for 6 hown data sheet
Hardened nozzle: not stated

Its 2 print profiles, in the documents' words

Nozzle 250-280 °C; Bed 100-120 °CcolorFabb, Technical datasheet colorFabb_HTp. 2: Recommended printing settings
Drying 65 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)

Price

Not in the price sample.

1 listing: 1 with no regular price per kilogram recorded

MakerWiz: 85.3 per kg, sale priceColorFabb HT (750 g) - 5 Colours / Black / 1.75 mmnot used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 3 documents

What the maker says (4)

BenefitsWith properties of excellent durability, toughness, and high temperature resistance, colorFabb_HT empowers professional users to create more useful items, making prototyping truly functional.colorFabb, Technical datasheet colorFabb_HTp. 1
Odour and emissionscolorFabb_HT is producted using Eastman Amphora HT5300, and is known as a low-oder, styrene free material, uniquely suitable for advanced 3D printing.colorFabb, Technical datasheet colorFabb_HTp. 1
Printing adviceFor best part strength, try to print with the least amount of fan cooling possible.colorFabb, Technical datasheet colorFabb_HTp. 2
Printing adviceFor better details and overhangs, increase fan speed.colorFabb, Technical datasheet colorFabb_HTp. 2

Not published by any product: tensile strength (Z).

Values are for the colour each sheet tested; pigment can change them.