PP-GF
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- converted price
- not published
How the numbers are worked out
Prusa Research Prusament PP Glass Fiber by Prusa PolymersStrength XY, MPa40.3Modulus XY, GPa2.1Charpy notched, kJ/m²7.9HDT 0.45, °C138HDT 1.8, °C113Price, CAD/kg118Nozzle, °C235–255Bed, °C85–105Chamber, °CnoneDrying, °C, hnone
Prusa Research Prusament PP Glass Fiber by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PP Glass Fiber by Prusa Polymers20 values | |||
| Tensile modulus XY | 2.1 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 2.5 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 40.3 ± 2.9 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength orientation not stated | 46.6 ± 1.3 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 48.8 ± 2.8 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 4.5 ± 0.1 %p. 2: Elongation at Yield Point [%] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 4.1 ± 0.2 %p. 2: Elongation at Yield Point [%] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 2.1 ± 0.1 GPap. 2: Flexural Modulus [GPa] | ISO 178 | in the median |
| Flexural strength XZ | 70.4 ± 5.3 MPap. 2: Flexural Strength [MPa] | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 17.6 ± 2.6 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Charpy impact strength XY | 7.9 ± 0.4 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | in the median |
| Charpy impact strength XZ | 26.9 ± 2.1 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Charpy impact strength XZ | 9.9 ± 0.8 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: measured on a bar in another orientation |
| Hardness | 68.5 ± 0.6 Shore Dp. 2: Hardness – Shore D | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 18 ± 1 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 138.3 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 112.6 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.12 g/cm3p. 2: Density [g/cm3] | ISO 1183 | |
| Water absorption | 0.11 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=30 % | |
| Melt mass-flow rate | 14.7 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
Print settings
- Nozzle
- 235–255 °Cown data sheet
- Bed
- 85–105 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle [°C] 245 ± 10; Bed [°C] 95 ± 10Prusa Research, Technical datasheet Prusament PP Glass Fiber by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type; p. 1: Additional Info
- Nozzle 245 ± 10 °C; Bed 95 ± 10 °C; Drying not necessaryPrusa Research, Prusament PP Glass Fiber | Prusamentp. 1: Exact-product chamber guidance: Enclosure not required
Price
118 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 118 CAD/kgPrusament PP Glass Fiber Natural (NFC), 1.75 mm / 850 g (SKU PR-8594173676299)in its price; 3DJake International (European storefront) lists 62.5 EUR for 0.85 kg: 73.5 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 3 documents
What the maker says (3)
- Nozzle wear
A hardened nozzle is necessary.
Prusa Research, Technical datasheet Prusament PP Glass Fiber by Prusa Polymersp. 1 - Printing advice
The brim is recommended to improve the adhesion of the edges and corners of the object.
Prusa Research, Technical datasheet Prusament PP Glass Fiber by Prusa Polymersp. 1 - Surface finish
PP can be postprocessed with sandpaper, razor blades, and a variety of other instruments. Wet sanding is recommended (due to airborne particles) but not necessary as the material doesn’t deform under the heat caused by friction.
Prusa Research, Prusament PP Glass Fiber | Prusamentp. 1: Beginners tips & tricks, Postprocessing
Chemicals and environment (5)
- Application notes: described in words
Vial rack — Example of a custom laboratory equipment
Prusa Research, Prusament PP Glass Fiber | Prusamentp. 1: Application, Vial rack example title and caption - Application notes: described in words
Pipette holder — Example of a custom laboratory equipment
Prusa Research, Prusament PP Glass Fiber | Prusamentp. 1: Application, Pipette holder example title and caption - Application notes: described in words
Pill packer bottle — Chemically resistant part made by Squinn
Prusa Research, Prusament PP Glass Fiber | Prusamentp. 1: Application, Pill packer bottle example title and caption - Application notes: described in words
Mechanical component — Part of a Prusa printer
Prusa Research, Prusament PP Glass Fiber | Prusamentp. 1: Application, Mechanical component example title and caption - Application notes: described in words
Exhaust pipes — Example of a large, yet dimensionally stable print by rekmajml
Prusa Research, Prusament PP Glass Fiber | Prusamentp. 1: Application, Exhaust pipes example title and caption
3DXTECH FIBREX GF PPStrength XY, MPa65Modulus XY, GPa6.75Charpy notched, kJ/m²—HDT 0.45, °C139HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–270Bed, °C80–110Chamber, °CnoneDrying, °C, hnone
3DXTECH FIBREX GF PP3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: FibreX™ PP+GF30 3D Printing Filament7 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 265°C Bed Temp: 85°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 6750 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 65 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 1.7 %p. 1: Tensile Elongation, Break | ISO 527 | not in the median: the only value of its test, shown as published |
| Flexural modulus XY | 5320 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 85 MPap. 1: Flexural Strength | ISO 178 | not in the median: the only value of its test, shown as published |
| HDT at 0.45 MPa | 139 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Density | 1.12 g/ccp. 1: Density | ISO 1183 | |
| 3DXTECH, FibreX™ PP+GF30 Polypropylene1 value | |||
| Fibre content | 30% glass fiber reinforcedp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 240–270 °Cown data sheet
- Bed
- 80–110 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: FibreX™ PP+GF30 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
- Nozzle 240-270°C; Bed 80-110°C; Chamber Not required; Drying Typically does not absorb moisture, no drying required!; 4 Hours at 65°C3DXTECH, FibreX™ PP+GF30 Polypropylenep. 1: Print Recommendations
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 134 per kg, sale priceBlack - 1.75mm 3DXTech FibreX™ PP+GF30 Polypropylene - 0.5 kg (SKU PP002GF100500BK00)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 3 documents
BASF Forward AM Ultrafuse PP GF30Strength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5.3HDT 0.45, °C148HDT 1.8, °C117Price, CAD/kg—Nozzle, °C240–260Bed, °C20–40Chamber, °C—Drying, °C, h604–16 h
BASF Forward AM Ultrafuse PP GF30BASF Forward AM
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BASF Forward AM, Ultrafuse PP GF30 Technical Data Sheet37 valuesUnless a row says otherwise: printed specimen (implied by the document) | |||
| Tensile modulus XY | 2628 MPap. 4: Young’s Modulus (XY) | ISO 527As the sheet prints it: ISO 527; rate=1mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Tensile modulus ZX | 2242 MPap. 4: Young’s Modulus (ZX) | ISO 527As the sheet prints it: ISO 527; rate=1mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 41.7 MPap. 4: Tensile strength (XY) | ISO 527As the sheet prints it: ISO 527; rate=5mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) ZX | 15.9 MPap. 4: Tensile strength (ZX) | ISO 527As the sheet prints it: ISO 527; rate=5mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Elongation at break XY | 4.4 %p. 4: Elongation at Break (XY-Direction) | ISO 527As the sheet prints it: ISO 527; rate=5mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Elongation at break ZX | 0.8 %p. 4: Elongation at Break | ISO 527As the sheet prints it: ISO 527; rate=5mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 3507 MPap. 4: Flexural Modulus (XY) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Flexural modulus XZ | 4026 MPap. 4: Flexural Modulus (XZ) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Flexural modulus ZX | 1671 MPap. 4: Flexural Modulus (ZX) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Flexural strength XY | 76.8 MPap. 4: Flexural Strength (XY) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Flexural strength XZ | 95.3 MPap. 4: Flexural Strength (XZ) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Flexural strength ZX | 19.3 MPap. 4: Flexural Strength (ZX) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | not in the median: measured after moisture conditioning |
| Flexural elongation at break XY | 4.6 %p. 4: Flexural Elongation at Break (XY) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | listed under other properties |
| Flexural elongation at break XZ | 3.3 %p. 4: Flexural Elongation at Break (XZ) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | listed under other properties |
| Flexural elongation at break ZX | 1.3 %p. 4: Flexural Elongation at Break (ZX) | ISO 178As the sheet prints it: ISO 178; rate=2mm/minafter moisture conditioningSamples were conditioned in standard climate (23°C, 50% RH 72h) | listed under other properties |
| Charpy impact strength XY | 5.3 kJ/m²p. 5: Impact Strength Charpy (notched) (XY-Direction) | ISO 179As the sheet prints it: ISO 179-2 | in the median |
| Charpy impact strength XY | 23.1 kJ/m²p. 5: Impact Strength Charpy (unnotched) (XY-Direction) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Charpy impact strength XZ | 5.2 kJ/m²p. 5: Impact Strength Charpy (notched) (XZ-Direction) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength ZX | 1.2 kJ/m²p. 5: Impact Strength Charpy (notched) (ZX-Direction) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XZ | 25.8 kJ/m²p. 5: Impact Strength Charpy (unnotched) (XZ-Direction) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Charpy impact strength ZX | 2.5 kJ/m²p. 5: Impact Strength Charpy (unnotched) (ZX-Direction) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Izod impact strength XY | 5.6 kJ/m²p. 5: Impact Strength Izod (notched) (XY-Direction) | ISO 180 | in the median |
| Izod impact strength XY | 20.5 kJ/m²p. 5: Impact Strength Izod (unnotched) (XY-Direction) | ISO 180 | not in the median: unnotched |
| Izod impact strength XZ | 6.2 kJ/m²p. 5: Impact Strength Izod (notched) (XZ-Direction) | ISO 180 | not in the median: measured on a bar in another orientation |
| Izod impact strength ZX | 1.4 kJ/m²p. 5: Impact Strength Izod (notched) (ZX-Direction) | ISO 180 | not in the median: measured on a bar in another orientation |
| Izod impact strength XZ | 2.4 kJ/m²physically implausiblep. 5: Impact Strength Izod (unnotched) (XZ-Direction) | ISO 180 | not in the median: physically implausible as published |
| Izod impact strength ZX | 2.6 kJ/m²p. 5: Impact Strength Izod (unnotched) (ZX-Direction) | ISO 180 | not in the median: unnotched |
| Hardness | 73 Shore Dp. 5: Shore Hardness D (15s) | ISO 7619As the sheet prints it: DIN ISO 7619-1; time=15s | in the median |
| HDT at 0.45 MPa | 148 °Cp. 5: HDT B at 0.45 MPa | ISO 75As the sheet prints it: ISO 75-2; 0.45MPa | in the median |
| HDT at 1.8 MPa | 117 °Cp. 5: HDT A at 1.8 MPa | ISO 75As the sheet prints it: ISO 75-2; 1.8MPa | in the median |
| Glass transition temperature | -5 °Cp. 5: Glass Transition Temperature | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 138 °Cp. 5: Vicat softening point at 50 N | ISO 306As the sheet prints it: ISO 306; 50N | |
| Vicat softening temperature | 164 °Cp. 5: Vicat softening point at 10 N | ISO 306As the sheet prints it: ISO 306; 10N | |
| Melting temperature | 158 °Cp. 5: Melting Temperature | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Crystallization temperature | 125 °Cp. 5: Crystallization Temperature | no standard stated | |
| Density | 1036 kg/m³p. 4: Filament Density | Filament, ISO 1183As the sheet prints it: ISO 1183-1 | |
| Melt volume-flow rate | 11.7 cm³/10 min (220°C, 2.16 kg)p. 5: Melt Volume-Flow Rate (MVR) | ISO 1133As the sheet prints it: ISO 1133; mass=2.16kg | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 20–40 °Cown data sheet
- Heated chamber
- no setpointown data sheet
- Drying
- 60 °C for 4–16 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240 – 260°C; Bed 20 - 40°C; Chamber -; Drying 60 °C in a hot air dryer or vacuum oven for 4 to 16 hoursBASF Forward AM, Ultrafuse PP GF30 Technical Data Sheetp. 3: Nozzle Temperature; p. 3: Bed Material; p. 3: Bed Temperature; p. 3: Nozzle Diameter; p. 4: Further Recommendations (drying); p. 3: Build Chamber Temperature (recommended column: "-")
Price
Not in the price sample.
Its 2 documents
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.