PP
12 products from 9 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
12 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- sold as toughened
- added filler or additive
- converted price
- not published
How the numbers are worked out
Fiberlogy R PPStrength XY, MPa21Modulus XY, GPa1.1Charpy notched, kJ/m²30HDT 0.45, °C80HDT 1.8, °C65Price, CAD/kg—Nozzle, °C220–250Bed, °CnoneChamber, °CnoneDrying, °C, h504 h
Fiberlogy R PPFiberlogy
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PP12 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 1100 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: added filler or additive |
| Tensile break strength orientation not stated | 21 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: added filler or additive |
| Elongation at break orientation not stated | 250 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: added filler or additive |
| Elongation at yield orientation not stated | 30 %p. 1: Elongation @ Yield ISO 527 % | specimen not stated, ISO 527 | listed under other properties |
| Flexural modulus orientation not stated | 1200 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: added filler or additive |
| Flexural strength orientation not stated | 18 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | not in the median: added filler or additive |
| Izod impact strength orientation not stated | 20 kJ/m²p. 1: Izod Impact Strength (Notched) @ 23°C | ISO 180tested at 23 °C | not in the median: added filler or additive |
| HDT at 0.45 MPa | 80 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: added filler or additive |
| HDT at 1.8 MPa | 65 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: added filler or additive |
| Vicat softening temperature | 135 °Cp. 1: Vicat Softening Temperature ISO 306 °C | specimen not stated, ISO 306 | |
| Melting temperature | 163 °Cp. 1: Melting Temperature Tm DSC °C | specimen not stated, DSCAs the sheet prints it: Tm DSC | |
| Continuous service temperature | 65 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C | specimen not stated, no standard namedAs the sheet prints it: UL 746 | |
| Fiberlogy, rPP Filament6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 700 MPa (ISO 527)p. 1: Tensile modulus | ISO 527 | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) orientation not stated | 14 MPa (ISO 527)p. 1: Tensile strength | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | >100% (ISO 527)p. 1: Elongation at break | ISO 527 | not in the median: another value of this product is in it |
| Charpy impact strength orientation not stated | 30 kJ/m² (ISO 179)p. 1: Charpy impact strength (notched) @ 23°C | ISO 179As the sheet prints it: ISO 179; notched | not in the median: added filler or additive |
| HDT at 0.45 MPa | 40°C (ISO 75)p. 1: Deflection temperature under load @ 0.45 MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: another value of this product is in it |
| Density | 1.05 g/cm³p. 1: Density | no standard stated | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PP (2025)1 value | |||
| HDT at 1.8 MPa | 40°Cp. 1: Heat Distortion Temperature @ 1.8 MPa | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- not requiredown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 220°C - 250°C; Bed Not required when using a packingFiberlogy, TECHNICAL DATA SHEET Fiberlogy R PPp. 1: Print Temperature
- Nozzle 220–250°C; Bed Not required when using packing tape; Drying 50°C / 4 hoursFiberlogy, rPP Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Build surface; p. 1: Drying conditions; p. 1: Enclosed chamber
- Nozzle 220°C - 250°C; Bed Not required when using a packing tapeFiberlogy, TECHNICAL DATA SHEET Fiberlogy R PP (2025)p. 1: Print Temperature; p. 1: Bed Temperature
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Benefits
R PP filament offers excellent tensile strength
Fiberlogy, rPP Filamentp. 1
SUNLU PP2.0Strength XY, MPa15Modulus XY, GPa—Charpy notched, kJ/m²23IzodHDT 0.45, °C65HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C40Chamber, °CnoneDrying, °C, h50
SUNLU PP2.0SUNLU
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, 三绿物性表 ISO PP2.012 valuesThe same values also in SUNLU, SUNLU PP2.0 - New Filaments. | |||
| Tensile strength (yield or break not stated) XY | 15 ± 3 MPap. 1: 拉伸强度(X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速 150 mm/s，打印温度 250 ℃。填充 100%，走线方式为 90 度。 | not in the median: added filler or additive |
| Elongation at break XY | 900 ± 300 %p. 1: 断裂伸长率(X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速 150 mm/s，打印温度 250 ℃。填充 100%，走线方式为 90 度。 | not in the median: added filler or additive |
| Flexural modulus XY | 500 ± 100 MPap. 1: 弯曲模量(X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速 150 mm/s，打印温度 250 ℃。填充 100%，走线方式为 90 度。 | not in the median: added filler or additive |
| Flexural strength XY | 18 ± 3 MPap. 1: 弯曲强度(X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速 150 mm/s，打印温度 250 ℃。填充 100%，走线方式为 90 度。 | not in the median: added filler or additive |
| Izod impact strength XY | 23 ± 5 KJ/m2p. 1: 悬 臂 梁 缺 口 冲 击 强 度 (X-Y) Izod Impact ISO 180 23℃ KJ/m2 Strength of Notched Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180print settings测试样条打印速 150 mm/s，打印温度 250 ℃。填充 100%，走线方式为 90 度。 | not in the median: added filler or additive |
| Hardness | 60 Shore (scale not specified by source)p. 1: 邵氏硬度 Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 65 ± 10 ℃p. 1: 热变形温度(X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: added filler or additive |
| Melting temperature | 156 ℃p. 1: 熔点温度 Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Decomposition temperature | ≥395 ℃p. 1: 分解温度@5%Decomposition Temp. | ISO 11358As the sheet prints it: ISO 11358; mass loss=5%; rate=20 ℃/min | |
| Density | 1.01 g/cm3p. 1: 密度 Density ISO 1183 23℃ g/cm3also in SUNLU, SUNLU PP2.0 - New Filaments | ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 4.4 ± 1 g/10 minp. 1: 熔体指数 Melt Mass-flow Rate ISO 1133 230℃/2.16 kg g/10 minalso in SUNLU, SUNLU PP2.0 - New Filaments | ISO 1133As the sheet prints it: 230℃/2.16 kg ISO 1133 | |
| Mould shrinkage orientation not stated | 1.36 %p. 1: 收缩率 Moulding Shrinkagealso in SUNLU, SUNLU PP2.0 - New Filaments | ISO 294tested at 23 ℃ | |
| SUNLU, SUNLU PP2.0 - New Filaments5 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 15±3 MPap. 1: Tensile Strength(MPa) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 900±300 %p. 1: Elongation at Break(%) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength orientation not stated | 18±3 MPap. 1: Flexural Strength(MPa) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength orientation not stated | 23±5 kJ/m²p. 1: Notched Izod Impact Strength(kJ/m²) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| HDT | 65±10 ℃p. 1: Heat Deflection Temperature(℃) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 40 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 240-260; Bed 40℃; Chamber 常温; Drying 50℃SUNLU, 三绿物性表 ISO PP2.0p. 2: Drying Temp.; p. 2: 喷嘴温度 Nozzle Temp.; p. 2: 平台温度 Plate Temp.; p. 2: 平台材料 Plate Material
- Nozzle 240-260℃; Bed 40℃SUNLU, SUNLU PP2.0 - New Filamentsp. 1: Bed Temperature; p. 1: Nozzle Temperature & Print Speed
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Supports and removal
Supported Material PVA
SUNLU, 三绿物性表 ISO PP2.0p. 2
Fiberlogy PPStrength XY, MPa14Modulus XY, GPa0.7Charpy notched, kJ/m²30HDT 0.45, °C51HDT 1.8, °C—Price, CAD/kg68Nozzle, °C220–250Bed, °CnoneChamber, °CnoneDrying, °C, h504 h
Fiberlogy PPFiberlogy
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy PP8 values | |||
| Tensile modulus orientation not stated | 700 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 14 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: added filler or additive |
| Elongation at break orientation not stated | 100 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: added filler or additive |
| Charpy impact strength | 30 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23℃ ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23℃ ISO 179 | not in the median: added filler or additive |
| HDT at 1.8 MPa | held back: the sheet's unit or table layout is unclearheld backp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: held back |
| Glass transition temperature | -31 °Cp. 1: Glass Transition Temperature Tg ISO 11357 °C | ISO 11357 | not in the median: added filler or additive |
| Vicat softening temperature | 110 °Cp. 1: Vicat Softening Temperature °C | ISO 306 | |
| Density | 1.05 g/cm3p. 1: Specific Density ISO 1183 g/cm3 | ISO 1183 | |
| Fiberlogy, PP Filament2 valuesUnless a row says otherwise: specimen not stated | |||
| Charpy impact strength orientation not stated | 30 kJ/m² (ISO 179)p. 1: Charpy impact strength (notched) @ 23°C | ISO 179As the sheet prints it: ISO 179; notched | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 51°C (ISO 75)p. 1: Deflection temperature under load @ 0.45 MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: added filler or additive |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- not requiredown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 220°C - 250°C; Bed Not required when using a packing tapeFiberlogy, TECHNICAL DATA SHEET Fiberlogy PPp. 1: Recommended printing settings; p. 1: Bed Temperature
- Nozzle 220–250°C; Bed Not required when using packing tape; Drying 50°C / 4 hoursFiberlogy, PP Filamentp. 1: Exact product printing block; nozzle, bed, plate, enclosure and drying source-specific guidance
Price
67.9 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 67.9 CAD/kgFiberlogy PP Black, 1.75mm / 750g (SKU FL-PP-BLACK-175-075)in its price; 3DJake International (European storefront) lists 31.7 EUR for 0.75 kg: 42.2 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 3 documents
What the maker says (1)
- Good for
PP filament is ideal for manufacturing parts that require both strength and flexibility, such as resealable containers, handles, and engineering components.
Fiberlogy, PP Filamentp. 1
SUNLU PPStrength XY, MPa19Modulus XY, GPa—Charpy notched, kJ/m²5.3IzodHDT 0.45, °C59HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PPSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, PP10 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO PP and SUNLU, SUNLU PP - Engineering Filaments. | |||
| Tensile strength (yield or break not stated) XY | 22.7 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Elongation at break XY | 900 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min % | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Flexural strength XY | 24 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: another value of this product is in it |
| Izod impact strength XY | 40 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2 | ISO 180As the sheet prints it: 23℃ ISO180 | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 61 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO75 | not in the median: another value of this product is in it |
| Melting temperature | 156 ℃p. 1: Melting Point ISO11357-3 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO PP | ISO 11357As the sheet prints it: ISO11357-3 | |
| Decomposition temperature | 395 ℃p. 1: @5%Decomposition Temp. ISO11358 20℃/min ℃ | ISO 11358 | |
| Density | 0.9 g/cm3p. 1: Density ISO1183 23℃ g/cm3 | ISO 1183As the sheet prints it: 23℃ ISO1183 | |
| Melt mass-flow rate | 9 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min | ISO 1133As the sheet prints it: 190℃/2.16kg ISO1133 | |
| Mould shrinkage orientation not stated | 1.5 %p. 1: Mold Shrinkage ISO294 23℃ %also in SUNLU, SUNLU PP - Engineering Filaments | ISO 294As the sheet prints it: 23℃ ISO294 | |
| SUNLU, TECHNICAL DATA SHEET ISO PP8 valuesThe same values also in SUNLU, SUNLU PP - Engineering Filaments.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 19 ± 3 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 850 ± 150 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 19 ± 3 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 5.3 ± 1.5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 16.1 ± 2.5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 54.5 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 58.5 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Melt mass-flow rate | 9.75 ± 2 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 230℃/2.16 kg g/10 minalso in SUNLU, SUNLU PP - Engineering Filaments | ISO 1133As the sheet prints it: 230℃/2.16 kg ISO 1133 | |
| SUNLU, SUNLU PP - Engineering Filaments5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 19±3 MPap. 1: Tensile Strength(MPa) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 850±150 %p. 1: Elongation at Break(%) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength orientation not stated | 19±3 MPap. 1: Flexural Strength(MPa) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength orientation not stated | 5.3±1.5 kJ/㎡p. 1: Notched Izod Impact Strength(kJ/㎡) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| HDT | 58.5±3 ℃p. 1: Heat Deflection Temperature(℃) | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 210-230; Bed 50-60℃(When using 3M adhesive to bond PP sheets); Chamber Room Temperture; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PPp. 2: Recommended printing settings; p. 2: Nozzle Temp.; p. 2: Plate Temp.
- Nozzle 210-230; Bed 50-60℃; Chamber Normal temperature; Drying 50℃SUNLU, PPp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 1: Points for attention
- Nozzle 210-230℃ / ≤30mm/s; Bed 50-60℃SUNLU, SUNLU PP - Engineering Filamentsp. 1: Nozzle Temperature & Print Speed; p. 1: Bed Temperature
Price
Not in the price sample.
Its 4 documents
What the maker says (4)
- Good for
Parts, medical instruments, containers
SUNLU, PPp. 1 - Supports and removal
Support Material PVA
SUNLU, PPp. 2 - Good for
Model aircraft ,Decorative items, toys, accessories, figurines, and lighting fixtures.
SUNLU, TECHNICAL DATA SHEET ISO PPp. 1 - Printing advice
Requires a PP build plate for optimal enclosed-chamber printing results.
SUNLU, TECHNICAL DATA SHEET ISO PPp. 1
iSANMATE PPStrength XY, MPa13.9Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C92HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C40–60Chamber, °C—Drying, °C, h—
iSANMATE PPiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PP Filament Technical Data Sheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 13.9 MPap. 1: Tensile Strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 460 %p. 1: ElongationAtBreak | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 390 MPap. 1: Flexural Modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 13.9 MPap. 1: Flexural | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | NB Qualitative (no fracture)p. 1: Notched Izod Impact Strength | ISO 179 | not in the median: no number given |
| HDT | 92 ℃p. 1: HeatDeflectionTemperature | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 169.4 ℃p. 1: MeltingTemperature | no standard stated | |
| Density | O.89 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240-260 °C; Bed ℃ 40-60iSANMATE, PP Filament Technical Data SheetRecommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
Cultural and creative, Toys, Gifts and Industrial.
iSANMATE, PP Filament Technical Data Sheetp. 1 - Benefits
iSANMATE optimized its material formula, changing the situation that it was difficult to print on ordinary desktop machines in the past
iSANMATE, PP Filament Technical Data Sheetp. 1 - Benefits
1.High transparency 2.High strength 3.Low warpage 4.Low water uptake
iSANMATE, PP Filament Technical Data Sheetp. 1
Spectrum PPStrength XY, MPa17Modulus XY, GPa—Charpy notched, kJ/m²65HDT 0.45, °C80HDT 1.8, °C—Price, CAD/kg63Nozzle, °C245–280Bed, °C80–100Chamber, °CnoneDrying, °C, h853 h
Spectrum PPSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PP11 valuesThe same values also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29.Unless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 17 MPap. 1: Tensile strength (dry, at 50 mm/min) | ISO 527As the sheet prints it: dry at 50 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 500,00 %p. 1: Elongation at break (dry, at 50 mm/min)also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29 | ISO 527As the sheet prints it: dry at 50 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strain at strength orientation not stated | 6,00 %p. 1: Elongation at max. force (dry, at 50 mm/min) | ISO 527As the sheet prints it: dry at 50 mm/min ISO 527 | listed under other properties |
| Flexural modulus orientation not stated | 0.95 GPap. 1: Flexural modulus (dry, at 2 mm/min) | ISO 178As the sheet prints it: dry at 2 mm/min ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 65 kJ/m2p. 1: Charpy impact strength, notched (dry) | ISO 179As the sheet prints it: dry ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 10 kJ/m2p. 1: Charpy impact strength, notched (-30°C) | ISO 179As the sheet prints it: -30°C ISO 179 | not in the median: tested below room temperature |
| HDT at 0.45 MPa | 80 °Cp. 1: Heat Distortion Temperature (HDT B)also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29 | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 135 °Cp. 1: VICAT Softening temperature (VST A) | ISO 306 | |
| Density | 0.89 g/cm3p. 1: Specific gravity | ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0.3 %p. 1: Water absorption, 23°C/24h | ISO 62As the sheet prints it: 23°C/24h ISO 62 | |
| Melt mass-flow rate | 7.5 g/10 minp. 1: Melt flow rate (MFR), 230°C / 2,16kg | ISO 1133As the sheet prints it: MFR 230°C / 2 16kg ISO 1133 | |
| Spectrum, TECHNICAL DATA SHEET PP10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 12 Mpaphysically implausiblep. 1: Tensile Stress | no standard stated | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 16 Mpap. 1: Tensile Strength at Yield | no standard stated | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 26 Mpap. 1: Tensile Strength at Break | no standard stated | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 637 %p. 1: Elongation at Break | no standard stated | not in the median: another value of this product is in it |
| Elongation at yield orientation not stated | 20 %p. 1: Elongation at Yield | no standard stated | listed under other properties |
| Flexural modulus orientation not stated | 400 Mpap. 1: Flexural Modulus | no standard stated | not in the median: another value of this product is in it |
| Tear strength orientation not stated | 127 kN/mp. 1: Tear Strength (Die C) | no standard namedAs the sheet prints it: method=Die C | |
| Tensile stress at 100 % elongation orientation not stated | 11 MPap. 1: Tensile Stress at 100% | no standard namedAs the sheet prints it: 100% | |
| Vicat softening temperature | 103 °Cp. 1: VICAT - Softening point | no standard stated | |
| Density | 0.9 g/cm3p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 245–280 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 85 °C for 3 hown data sheet
- Hardened nozzle
- not neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Spectrum, TECHNICAL DATA SHEET PP; bed in Spectrum, TECHNICAL DATA SHEET PP.
Its 5 print profiles, in the documents' words
- Nozzle 265-295°C; Bed 95-120°C; Chamber material does not require a heated building chamberSpectrum, TECHNICAL DATA SHEET PPp. 1: Recommended printing settings; p. 1: Ruby or hardened nozzle; p. 1: chamber statement; p. 1: Adhesive required; p. 1: settings footnote
- Nozzle 245-280°C; Bed 80-100°CSpectrum, TECHNICAL DATA SHEET PPp. 1: Ruby or hardened nozzle; p. 1: Adhesive
- No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 5: Ruby or hardened nozzle recommended; p. 5: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended; p. 25: Adhesive
- Drying 85°C, 3h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
62.5 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 62.5 CAD/kgSpectrum PP Black, 1.75 mm / 750 g (SKU SPC-81677)in its price; 3DJake International (European storefront) lists 29.2 EUR for 0.75 kg: 38.9 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 6 documents
What the maker says (17)
- Benefits
chemical resistance to lubricants and oils
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Benefits
easy separation of the object from the bed
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Warping and shrinkage
low processing (linear) shrinkage up to 0.3%
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Adhesion between layers
Our material does not require a heated building chamber to be printed and it exhibits enhanced layer bonding, thus reducing the anisotropy of the final part.
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Benefits
Fully recyclable
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Benefits
Outstanding resistance to wear and abrasion
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Benefits
Food contact compliant
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Surface finish
Surface finish semi-matte
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Adhesion between layers
Thanks to its optimized formulation, Spectrum PP ensures superb interlayer adhesion, minimal shrinkage, and a stable, predict-able printing process, even on standard desktop 3D printers.
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Moisture sensitivity
Very low moisture absorption
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET PPp. 1 - Benefits
PP-copolymer unreinforced, outstanding chemical resistance, ultimate elongation - 500%
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21 - Benefits
good temperature & electrical resistance
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 21 - Benefits
PP-copolymer unreinforced, outstanding chemical resistance, ultimate elongation - 500%;
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3
FormFutura Centaur PPStrength XY, MPa12Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg92Nozzle, °C220–240Bed, °C80–85Chamber, °C—Drying, °C, h—
FormFutura Centaur PPFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Centaur PP8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 12 Mpap. 1: Impact strength - - - Tensile strength Tensile modulus - - - | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 600 %p. 1: Tensile modulus - - - Elongation at break Flexural strength - - - | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 402 Mpap. 1: Flexural modulus | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 50 Shore Dp. 1: Hardness | ASTM D2240 | in the median |
| Vicat softening temperature | 103° Cp. 1: Viscat softening temp. | no standard stated | |
| Melting temperature | 205 ± 15° Cp. 1: Melting termperature | no standard stated | |
| Density | 0.9 g/ccp. 1: Specific gravity | ASTM D1505 | |
| Melt mass-flow rate | 8 g/10minp. 1: Melt flow rate | ISO 1133 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 80–85 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, Centaur PP.
Its 2 print profiles, in the documents' words
- Nozzle ± 220 - 240° CFormFutura, Technical Data Sheet Centaur PPp. 1: Recommended printing settings
- Nozzle ± 245 – 270° C; Bed ± 80 – 85° CFormFutura, Centaur PPp. 1: General printing guidelines
Price
92.5 CAD/kgits one regular price in the sample
1 listing
- 3DJake International: 92.5 CAD/kgFormFutura Centaur PP Black, 1.75 mm (SKU FF-CTPP-175BLCK-00500)in its price; 3DJake International (European storefront) lists 28.7 EUR for 0.5 kg: 57.5 EUR/kg before VAT, × 1.6084 CAD per EUR (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 3 documents
What the maker says (18)
- Good for
Centaur PP combines a unique set of material properties into a 3D printer filament, which makes Centaur PP an extremely diverse and multi-functional material suitable for numerous applications ranging from 3D printing dishwasher proof and microwave safe household articles to functional engineering objects with great endurance properties.
FormFutura, Technical Data Sheet Centaur PPp. 1 - Adhesion between layers
Centaur PP is a lightweight and high-performance Polypropylene (PP) filament, which is engineered to have outstanding mechanical properties and a superb interlayer adhesion.
FormFutura, Technical Data Sheet Centaur PPp. 1 - Adhesion between layers
Centaur PP 3D prints with a superb interlayer adhesion and features outstanding mechanical properties.
FormFutura, Centaur PPp. 1 - Benefits
Centaur PP is a lightweight and high-performance Polypropylene (PP) filament.
FormFutura, Centaur PPp. 1 - Benefits
It is an extremely diverse and multifunctional material.
FormFutura, Centaur PPp. 1 - Good for
It can, amongst others, be used for functional engineering parts and household items.
FormFutura, Centaur PPp. 1 - Benefits
It is both dishwasher and microwave proof.
FormFutura, Centaur PPp. 1 - Benefits
Centaur PP has outstanding mechanical properties and a superb interlayer adhesion.
FormFutura, Centaur PPp. 1 - Benefits
Food contact compliant natural variant
FormFutura, Centaur PPp. 1 - Benefits
Dishwasher proof and microwave safe
FormFutura, Centaur PPp. 1 - Benefits
Watertight printing possible with only single wall prints
FormFutura, Centaur PPp. 1 - Benefits
Great elastic properties
FormFutura, Centaur PPp. 1 - Benefits
Can stretch up to >600% before breaking
FormFutura, Centaur PPp. 1 - Benefits
Improved wear-, abrasion- and fatigue resistance
FormFutura, Centaur PPp. 1 - Benefits
High chemical resistance
FormFutura, Centaur PPp. 1 - Adhesion between layers
Excellent interlayer adhesion
FormFutura, Centaur PPp. 1 - Printing advice
Large Centaur PP prints can be printed on an unheated 2mm or 3mm PP plate, which can be attached to the print bed.
FormFutura, Centaur PPp. 1 - Printing advice
Smaller prints can be printed on standard PP packaging tape.
FormFutura, Centaur PPp. 1
Fabru Polypropylene (PP)Strength XY, MPa28Modulus XY, GPa1.2Charpy notched, kJ/m²—HDT 0.45, °C85HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C70–90Chamber, °C—Drying, °C, hnone
Fabru Polypropylene (PP)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Polypropylene (PP)8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1200 MPap. 1: Tensile modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 28 MPap. 1: Yield stress (ISO 527-2) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 12 %p. 1: Elongation at break (ISO 527-2) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 12 %p. 1: Elongation at yield (ISO 527-2) | ISO 527As the sheet prints it: ISO 527-2 | listed under other properties |
| HDT at 0.45 MPa | 85 °Cp. 1: Heat deflection temperature | ISO 75As the sheet prints it: 0.45 MPa (ISO 75-2/B) | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 134 °Cp. 1: Vicat softening temperature A | no standard stated | |
| Density | 0.90 g/cm3p. 1: Density (ASTM D792) | ASTM D792 | |
| Melt mass-flow rate | 10 g/10minp. 1: MFR (ISO 1133) | ISO 1133 | |
Print settings
- Nozzle
- 210–260 °Cown data sheet
- Bed
- 70–90 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not neededown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-260 °C; Bed 70-90 °C; Drying Pre-drying not necessaryFabru, Polypropylene (PP)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Trocknungstemperatur
Price
Not in the price sample.
Its 2 documents
What the maker says (9)
- Good for
Polypropylene has a special long-term bending strength and is therefore very suitable for plastic hinges/film hinges and snaps.
Fabru, Polypropylene (PP)p. 1 - Benefits
The purefil filament is made from a special polypropylene, which has lower crystallinity and therefore achieves greater transparency.
Fabru, Polypropylene (PP)p. 1 - Benefits
This means that parts with a significantly lower weight can be produced and with a 1kg filament you can produce significantly more parts than with other materials.
Fabru, Polypropylene (PP)p. 1 - Benefits
PP has very good chemical resistance and is resistant to most acids and alkalis.
Fabru, Polypropylene (PP)p. 1 - Benefits
Food safe
Fabru, Polypropylene (PP)p. 1 - Pitfalls and limitations
Please note the poor cold properties, which make PP brittle at sub-zero temperatures.
Fabru, Polypropylene (PP)p. 1 - Warping and shrinkage
Tends to warp (warp effect)
Fabru, Polypropylene (PP)p. 1 - Warping and shrinkage
This also leads to better processability with less warping.
Fabru, Polypropylene (PP)p. 1 - Moisture sensitivity
Pre-drying not necessary
Fabru, Polypropylene (PP)p. 1
FormFutura Pegasus PPStrength XY, MPa12Modulus XY, GPa0.605Charpy notched, kJ/m²3.56HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–245Bed, °C0–100Chamber, °C—Drying, °C, h—
FormFutura Pegasus PPFormFutura
Modified: lightweight additive. Its values are kept out of the material's medians.
Sold as toughened or impact-modified: "based on our Centaur PP plus other PP grades and various impact modifiers and binding" (FormFutura, Technical Data Sheet Pegasus PP, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Pegasus PP7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 605 Mpap. 1: Tensile modulus | ISO 527 | not in the median: added filler or additive |
| Tensile yield strength orientation not stated | 12 Mpap. 1: Tensile strength | ISO 527 | not in the median: added filler or additive |
| Elongation at break orientation not stated | 25 %p. 1: Elongation at break | ISO 527 | not in the median: added filler or additive |
| Charpy impact strength | 3.56 KJ/m²p. 1: Impact strength | ISO 179tested at 23° C (73° F)notched | not in the median: added filler or additive |
| Melting temperature | 154° Cp. 1: Melting termperature | no standard stated | |
| Density | 0.75 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 6,2 g/10minp. 1: Melt flow rate 230°C / 2,16kg ISO 1133 | ISO 1133As the sheet prints it: 230°C / 2 16kg ISO 1133 | |
Print settings
- Nozzle
- 215–245 °Cown data sheet
- Bed
- 0–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle ± 215 - 245° CFormFutura, Technical Data Sheet Pegasus PPp. 1: Recommended printing settings
- Nozzle ± 215 – 245° C; Bed ± 0 – 100° CFormFutura, Pegasus PP-HGS25 Ultralightp. 1: General printing guidelines
Price
Not in the price sample.
Its 3 documents
What the maker says (19)
- Good for
Pegasus PP combines all the mechanical properties of PP with an extremely lightweight and by that makes it a very suitable material for applications such as automotive, drones, floating applications, wear resistant & durable applications, etc…
FormFutura, Technical Data Sheet Pegasus PPp. 1 - Benefits
based on our Centaur PP plus other PP grades and various impact modifiers and binding
FormFutura, Technical Data Sheet Pegasus PPp. 1 - Benefits
Pegasus PP-HGS25 Ultralight is most likely the lightest PP filament in the world!
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
Pegasus PP-HGS25 is a PP filament that is enhanced with hollow glass nanotechnology, which makes this 3D printer filament 20% lighter than virgin PP filaments.
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
The modification with 25% hollow glass microspheres made from soda-lime borosilicate glass not only make Pegasus PP-HGS25 an extremely lightweight filament, but also significantly stiffer than normal PP filament.
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
The inherent properties of the added hollow glass microspheres provide a number of unique performance advantages, such as weight reduction, dimensional stability, thermal insulation and a lower dielectric constant.
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Good for
This makes Pegasus PP-HGS25 an extremely versatile 3D printer filament for various applications such as automotive, drones, floating applications, and applications that require lightweight, wear resistant and durable parts.
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
Extremely lightweight
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
20% lighter than average PP
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
40% lighter than average PLA
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
Good wear-, abrasion-, and fatigue resistance
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
Significantly stiffer than normal PP filament
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
High chemical resistance
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Moisture sensitivity
Does not absorb moisture
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Adhesion between layers
Excellent interlayer adhesion
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Printing advice
Excellent buildplate adhesion with EasyFix Adhesive – Nr. V (for PP-GF)
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Printing advice
Large Pegasus PP Ultralight prints can be printed on an unheated 2mm or 3mm PP plate, which can be attached to the print bed.
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Printing advice
Smaller prints can be printed on standard PP packaging tape.
FormFutura, Pegasus PP-HGS25 Ultralightp. 1 - Benefits
Pegasus PP-HGS25 is a PP filament that is enhanced with hollow glass nanotechnology, which makes this 3D printer filament 20% lighter and significantly stiffer than virgin PP filaments.
FormFutura, Pegasus PP-HGS25 Ultralightp. 1
Fillamentum PP 2320Strength XY, MPa23Modulus XY, GPa1.4Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C225–245Bed, °C90–105Chamber, °C—Drying, °C, h802 h
Fillamentum PP 2320Fillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, PP 23206 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1400 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 23,0 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 20 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 184 kJ/m2p. 1: Charpy impact strength | ISO 179As the sheet prints it: ISO 179-1/1eU | not in the median: unnotched |
| Density | 0,96 g/cm3p. 1: Material density | ISO 1183 | |
| Melt mass-flow rate | 7,4 g/10 minp. 1: Melt flow index | ISO 1133 | |
Print settings
- Nozzle
- 225–245 °Cown data sheet
- Bed
- 90–105 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80 °C for 2 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 225–245 °C; Bed 90–105 °CFillamentum, PP 2320p. 1: Recommended printing settings; p. 1: Type of bed
- Drying 2 h, 80 °C; the need to dry 1 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: PP 2320
Price
Not in the price sample.
Its 3 documents
What the maker says (12)
- Good for
Material is ideal for prototyping thanks to wide application range.
Fillamentum, PP 2320p. 1 - Good for
The material complies with requirements for food contact applications.
Fillamentum, PP 2320p. 1 - Benefits
PP 2320 has high mechanical and impact resistance.
Fillamentum, PP 2320p. 1 - Benefits
The material can be recycled easily.
Fillamentum, PP 2320p. 1 - Warping and shrinkage
The material offers high dimensional stability
Fillamentum, PP 2320p. 1 - Surface finish
smooth and matte surface.
Fillamentum, PP 2320p. 1 - Adhesion between layers
The printed object has great inter-layer adhesion
Fillamentum, PP 2320p. 1 - Moisture sensitivity
low moisture adsorption.
Fillamentum, PP 2320p. 1 - Printing advice
Use of adhesive is necessary due to nonpolar polymer structure.
Fillamentum, PP 2320p. 1 - Printing advice
Always use brim for better bed adhesion.
Fillamentum, PP 2320p. 1 - Printing advice
PP 2320: 2 h; 80 °C; 1
Fillamentum, Drying of filaments before processing on 3D printerp.2 Table1 own product row PP 2320 - Moisture sensitivity
PP 2320 2 h 80 °C 1 /
Fillamentum, Drying of filaments before processing on 3D printerp. 2
Chemicals and environment (5)
- Organic solvent resistance: resistant
good
Acetone · Acetone · specificFillamentum, PP 2320p.1: Chemical properties, own named group row and source rating - Acid resistance: resistant
good
Fillamentum, PP 2320p.1: Chemical properties, own named group row and source rating - Alkali resistance: resistant
good
Fillamentum, PP 2320p.1: Chemical properties, own named group row and source rating - Organic solvent resistance: resistant
good
Effect of organic solventFillamentum, PP 2320p.1: Chemical properties, own named group row and source rating - Oil and grease resistance: described in words
medium
Effect of oils and greaseFillamentum, PP 2320p.1: Chemical properties, own named group row and source rating
Yousu PPStrength XY, MPa23Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C80–100Chamber, °C—Drying, °C, h—
Yousu PPYousu
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Yousu, Yousu PP 3D FILMAENT Technical Data Sheet5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 23-29 MPap. 1: Tensile Strength MPa | GB/T 1040.2As the sheet prints it: GB/T 1040.2-2006 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 80 %p. 1: Tensile Elongation % | GB/T 1040.2As the sheet prints it: GB/T 1040.2-2006 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 35-45 MPap. 1: Flexural Strength MPa | GB/T 9341As the sheet prints it: GB/T 9341-2008 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 0.91-0.95 g/cm3p. 1: Density GB/T 1033.1-2008 g/cm3 | GB/T 1033.1As the sheet prints it: GB/T 1033.1-2008 | |
| Melt mass-flow rate | 12-15 g/10minp. 1: Melt Flow Rate GB/T 3682-2000 g/10min 230℃, 2.16Kg | GB/T 3682As the sheet prints it: 230℃ 2.16Kg GB/T 3682-2000 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printer.
Its 2 print profiles, in the documents' words
- Nozzle 220-240℃; Bed 80℃~100℃Yousu, Yousu PP 3D FILMAENT Technical Data Sheetp. 1: Recommended printing settings; p. 1: Bed Temp
- Nozzle 225℃-235℃; Bed 85℃Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1: Hot End Temperature; p. 1: Bed Temperature; p. 1: Nozzle; p. 1: Bed surface
Price
Not in the price sample.
Its 3 documents
What the maker says (14)
- Adhesion between layers
Excellent layer adhesion Parts printed in PP tend to have very good layer adhesion and are rarely prone to layer splitting.
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Benefits
Polypropylene,short as PP filament is a tough, semi-rigid thermoplastic that is highly resistant to heat, electricity, chemicals, fatigue, and impact
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Good for
Due to its high resistance to damage and remarkable flexibility as well as resistance to chemical substances (acids, bases, water), it has found many applications in various fields of industry and everyday use.
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Benefits
Good chemical and fatigue resistance
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Surface finish
Smooth surface finish
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Moisture sensitivity
Low moisture absorption
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Moisture sensitivity
The relative inertness of PP makes it practically impermeable to water
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Adhesion between layers
Excellent layer adhesion
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Adhesion between layers
Parts printed in PP tend to have very good layer adhesion and are rarely prone to layer splitting.
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Benefits
Excellent flexibility and light lightweight
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Good for
PP can be used to make easily deform-able lightweight parts when printed with thin walls and light infill.
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Benefits
On the other hand tough parts with exceptional impact resistance can be produced when printing solid parts with thick walls.
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Printing advice
PP is really difficult to stick to any material printer bed surface besides itself.
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1 - Printing advice
Polypropylene sheet building film:YOUSU iStick film integrated Nano technology enables no warping printing and it is better than PEI film and other heating bed stick film.
Yousu, YOUSU PP(polypropylene) 3d printer Filament, 1.75 mm For FDM 3D Printerp. 1
Raise3D PStrength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C20–80Chamber, °CnoneDrying, °C, h—
Raise3D PRaise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Raise3D, Technical data sheet: P-filament4 valuesUnless a row says otherwise: specimen not stated | |||
| Melting temperature | 137 °Cp. 2: Melt temperature | ASTM D3418 | |
| Density | 0.9 g/cm3p. 2: Density | ISO 1183 | |
| Melt mass-flow rate | 19.3 g/10 minp. 2: Melt Flow Rate1 | ISO 1133tested at 210 °C | |
| Melt volume-flow rate | 25.7 cm3/10 minp. 2: Melt Volume Rate1 | ISO 1133tested at 210 °C | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 20–80 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 - 220 °C; Bed 20 °C (50 - 80 °C recommended for the first layer, 100 – 110 °C for non-destructive removal after completion); Chamber not requiredRaise3D, Technical data sheet: P-filamentp. 1: Recommended printing settings: Nozzle temperature; p. 1: Heading; p. 1: Bed modification; p. 2: Specimen chamber temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
PP is one of the lightest materials and has excellent mechanical and chemical properties.
Raise3D, Technical data sheet: P-filamentp. 1 - Odour and emissions
Odor odorless
Raise3D, Technical data sheet: P-filamentp. 2
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.