HIPS
11 products from 10 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
11 products
Key
- set apart: test bar not described as printed, or no stated load
- sold as toughened
- shared data sheet
- not published
How the numbers are worked out
BASF Forward AM Ultrafuse HiPSStrength XY, MPa18.4Strength Z, MPa13.7Modulus XY, GPa1.59Charpy notched, kJ/m²6.5HDT 0.45, °C91HDT 1.8, °C86Price, CAD/kg—Nozzle, °C240–260Bed, °C100–120Chamber, °C—Drying, °C, h604–16 h
BASF Forward AM Ultrafuse HiPSBASF Forward AM
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BASF Forward AM, Ultrafuse HiPS29 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 1588 MPap. 3: Young’s Modulus ISO 527 | ISO 527print settingsPrint direction Standard | in the median |
| Tensile modulus Z | 1603 MPa / 232 ksip. 3: Young’s Modulus | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 18.4 MPap. 3: Tensile strength ISO 527 | ISO 527print settingsPrint direction Standard | in the median |
| Tensile strength (yield or break not stated) Z | 13.7 MPa / 2.0 ksip. 3: Tensile strength | ISO 527 | in the median |
| Elongation at break XY | 1.4 %p. 3: Elongation at Break ISO 527 | ISO 527print settingsPrint direction Standard | in the median |
| Elongation at break Z | 1.3 %p. 3: Elongation at Break | ISO 527 | in the median |
| Flexural modulus XY | 1635 MPap. 3: Flexural Modulus ISO 178 | ISO 178print settingsPrint direction Standard | in the median |
| Flexural modulus ZX | 1227 MPa / 178 ksip. 3: Flexural Modulus | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 31.8 MPap. 3: Flexural Strength ISO 178 | ISO 178print settingsPrint direction Standard | in the median |
| Flexural strength ZX | 26.8 MPa / 3.9 ksip. 3: Flexural Strength | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural elongation at break XY | 5.4 %p. 3: Flexural Strain at Break ISO 178 | ISO 178print settingsPrint direction Standard | listed under other properties |
| Flexural elongation at break ZX | 4.6 %p. 3: Flexural Strain at Break | ISO 178 | listed under other properties |
| Charpy impact strength XY | 6.5 kJ/m²p. 3: Impact Strength Charpy (notched) ISO 179-2 | ISO 179As the sheet prints it: ISO 179-2print settingsPrint direction Standard · XY column | in the median |
| Charpy impact strength XY | 36.0 kJ/m²p. 3: Impact Strength Charpy (unnotched) ISO 179-2 | ISO 179As the sheet prints it: ISO 179-2print settingsPrint direction Standard · XY column | not in the median: unnotched |
| Charpy impact strength XZ | 6.6 kJ/m²p. 3: Impact Strength Charpy (notched) (XZ) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength ZX | 4.1 kJ/m²p. 3: Impact Strength Charpy (notched) (ZX) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XZ | 57.6 kJ/m²p. 3: Impact Strength Charpy (unnotched) (XZ) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Charpy impact strength ZX | 8.6 kJ/m²p. 3: Impact Strength Charpy (unnotched) (ZX) | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Izod impact strength XY | 6.9 kJ/m²p. 3: Impact Strength Izod (notched) ISO 180 | ISO 180print settingsPrint direction Standard · XY column | in the median |
| Izod impact strength XY | 35.0 kJ/m²p. 3: Impact Strength Izod (unnotched) ISO 180 | ISO 180print settingsPrint direction Standard · XY column | not in the median: unnotched |
| Izod impact strength XZ | 7.1 kJ/m²p. 3: Impact Strength Izod (notched) (XZ) | ISO 180 | not in the median: measured on a bar in another orientation |
| Izod impact strength ZX | 4.8 kJ/m²p. 3: Impact Strength Izod (notched) (ZX) | ISO 180 | not in the median: measured on a bar in another orientation |
| Izod impact strength XZ | 57.1 kJ/m²p. 3: Impact Strength Izod (unnotched) (XZ) | ISO 180 | not in the median: unnotched |
| Izod impact strength ZX | 9.1 kJ/m²p. 3: Impact Strength Izod (unnotched) (ZX) | ISO 180 | not in the median: unnotched |
| HDT at 0.45 MPa | 91 °Cp. 2: HDT at 0.45 MPa | printed specimen, ISO 75As the sheet prints it: 0.45 MPa ISO 75-2 | in the median |
| HDT at 1.8 MPa | 86 °Cp. 2: HDT at 1.8 MPa | printed specimen, ISO 75As the sheet prints it: 1.8 MPa ISO 75-2 | in the median |
| Glass transition temperature | 99 °Cp. 2: Glass Transition Temperature | specimen not stated, ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Density | 1023 kg/m3p. 2: Printed Part Density | printed specimen, ISO 1183As the sheet prints it: ISO 1183-1 | |
| Melt volume-flow rate | 29.3 cm3/10 minp. 2: Melt Volume Rate | specimen not stated, ISO 1133 | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- no setpointown data sheet
- Drying
- 60 °C for 4–16 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240 – 260 °C; Bed 100 – 120 °C; Chamber -; Drying 60 °C in a hot air dryer or vacuum oven for 4 to 16 hoursBASF Forward AM, Ultrafuse HiPSp. 2: Recommended printing settings; p. 2: Drying recommendations; p. 2: Build Chamber Temperature; p. 2: Bed Material
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing.
BASF Forward AM, Ultrafuse HiPSp. 1 - Surface finish
Our HiPS is easy to post process with glue or with sanding paper.
BASF Forward AM, Ultrafuse HiPSp. 1 - Supports and removal
HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HiPS is an easy breakaway support.
BASF Forward AM, Ultrafuse HiPSp. 1
Fiberlogy HIPSStrength XY, MPa25Strength Z, MPa—Modulus XY, GPa1.85Charpy notched, kJ/m²12HDT 0.45, °C83HDT 1.8, °C75Price, CAD/kg—Nozzle, °C230–245Bed, °C80–100Chamber, °CnoneDrying, °C, h604 h
Fiberlogy HIPSFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS11 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS. | |||
| Tensile modulus orientation not stated | 1850 MPap. 1: Tensile Modulus ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 25 MPap. 1: Tensile Strength @ Yield ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 22 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 31 %p. 1: Elongation @ Break ISO 527 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 1,5 %p. 1: Elongation @ Yield ISO 527 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS | ISO 527 | listed under other properties |
| Izod impact strength | 10 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23°C ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 83 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 75 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 100 °Cp. 1: Glass Transition Temperature Tg DSC °C | no standard stated | in the median |
| Vicat softening temperature | 90 °Cp. 1: Vicat Softening Temperature ISO 306 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS | ISO 306 | |
| Continuous service temperature | 50 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C | no standard namedAs the sheet prints it: UL 746 | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPS3 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Charpy impact strength | 12 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 74 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: another value of this product is in it |
| Melting temperature | 180-260 °Cp. 1: Melting Temperature Tm ISO 294 °C | specimen not stated, ISO 294 | |
| Fiberlogy, HIPS Filament3 valuesUnless a row says otherwise: specimen not stated | |||
| Charpy impact strength orientation not stated | 12 kJ/m²p. 1: Charpy impact strength (notched) @ 23°C | ISO 179tested at 23 °C | not in the median: another value of this product is in it |
| Vicat softening temperature | 74°Cp. 1: Vicat softening temperature | ISO 306 | |
| Density | 1.04 g/cm³p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 230–245 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, HIPS Filament.
Its 3 print profiles, in the documents' words
- Nozzle 230°C - 245°C; Bed 80°C - 100°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPSp. 1: Recommended printing settings
- Nozzle 230°C - 245°C; Bed 80°C - 100°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy HIPSp. 1: Recommended printing settings
- Nozzle 230–245°C; Bed 100°C; Drying 60°C / 4 hoursFiberlogy, HIPS Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Supports and removal
After printing, the support material can be easily removed by immersing the model in a D-limonene solution
Fiberlogy, HIPS Filamentp. 1
3DXTECH 3DXMAX HIPSStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa1.35Charpy notched, kJ/m²—HDT 0.45, °C80HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–235Bed, °C100–110Chamber, °CnoneDrying, °C, hnone
3DXTECH 3DXMAX HIPS3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, 3DXMAX HIPS8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 225°C Bed Temp: 100°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 1350 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 40 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 18 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 1600 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 70 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 80 °Cp. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | in the median |
| Glass transition temperature | 100 °Cp. 1: Glass Transition Temperature (Tg) | DSC | in the median |
| Density | 1.04 g/ccp. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 220–235 °Cown data sheet
- Bed
- 100–110 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, 3DXMAX HIPSRecommended printing settings
- Nozzle 220-235C; Bed 100-110C; Chamber Not required; Drying Not needed3DXTECH, 3DXMAX® HIPSPrint Recommendations
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Supports and removal
Can be removed from models by hand and be dissolved away with d-limonene
3DXTECH, 3DXMAX® HIPSp. 1
Spectrum hipsxStrength XY, MPa16Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²7HDT 0.45, °C88HDT 1.8, °C73Price, CAD/kg43Nozzle, °C230–245Bed, °C80–100Chamber, °C—Drying, °C, h802 h
Spectrum hipsxSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, hipsx13 valuesThe same values also in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.Unless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 16 MPap. 1: Tensile Stress at Yield | ISO 527As the sheet prints it: ISO 527-2/5 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 16 MPap. 1: Tensile Stress at Break | ISO 527As the sheet prints it: ISO 527-2/5 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 50,00%p. 1: Tensile Strain at Break | ISO 527As the sheet prints it: ISO 527-2/5 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 1.5%p. 1: Tensile Strain at Yield | ISO 527As the sheet prints it: ISO 527-2/5 | listed under other properties |
| Flexural modulus orientation not stated | 2000 MPap. 1: Flexural Modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 50 MPap. 1: Flexural Strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 7kJ/m2p. 1: Charpy Notched Impact Strength | ISO 179As the sheet prints it: ISO 179/2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 90J/mp. 1: Notched Izod Impact | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| Hardness | 55 Rockwell Rtranscription correctedp. 1: Rockwell Hardness (R-Scale) | ISO 2039As the sheet prints it: ISO 2039-2 | |
| HDT at 0.45 MPa | 88°Cp. 1: Heat Deflection Temperaturealso in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO | ISO 75As the sheet prints it: ISO 75-2 method B (0.45 MPa) | in the median |
| Vicat softening temperature | 87°Cp. 1: Vicat Softening Temperature | ISO 306As the sheet prints it: ISO 306/B50 | |
| Density | 1.05 g/cm3p. 1: Density | ISO 1183 | |
| Melt mass-flow rate | 12 g/10min g/10 minp. 1: Melt Flow Rate, (200°C/5.0kg) | ISO 1133As the sheet prints it: ISO 1133; 200 °C, 5.0 kg | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO2 valuesUnless a row says otherwise: specimen not stated | |||
| HDT at 1.8 MPa | 73°Cp. 4: HDT A | no standard namedAs the sheet prints it: method=A | in the median |
| Vicat softening temperature | 96°Cp. 4: VICAT | no standard stated | |
Print settings
- Nozzle
- 230–245 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 2 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 230-245°C; Bed 80-100°CSpectrum, hipsxRecommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
- Drying 80°C, 2h; RecommendedSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
43 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- 3D Printing Canada: 25 per kg, sale priceDeep Black - Spectrum HIPS-X Filament - 1.75mm, 1kg / Default Titlenot used: no regular price per kilogram recorded; seen 10 Sep 2026
- 3D Printing Canada: 43 CAD/kgGypsum White - Spectrum HIPS-X Filament - 1.75mm, 1kg / Default Titlein its price; seen 10 Sep 2026
Its 4 documents
What the maker says (9)
- Warping and shrinkage
Further, you can use Spectrum HIPS–X as a base material for manufacturing of components which require a reduced processing shrinkage as compared to ABS.
Spectrum, hipsxp. 1 - Warping and shrinkage
lower shrinkage rate than classic ABS
Spectrum, hipsxp. 1 - Surface finish
matt surface
Spectrum, hipsxp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, hipsxp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, hipsxp. 1 - Supports and removal
It is usually used as support for components manufactured with ABS, where HIPS-X supports are dissolved in the citric acid solution (D–Limonene) upon completion of the manufacturing process.
Spectrum, hipsxp. 1 - Supports and removal
fully soluble in D-Limonene
Spectrum, hipsxp. 1 - Printing advice
Closed chamber recommended for larger prints
Spectrum, hipsxp. 1 - Benefits
Light, fully soluble in D-Limonene, HDT B 88°C
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3
Fillamentum HIPS ExtrafillStrength XY, MPa26Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²17HDT 0.45, °C—HDT 1.8, °C85Price, CAD/kg—Nozzle, °C230–250Bed, °C90–105Chamber, °C—Drying, °C, h70≥ 3 h
Fillamentum HIPS ExtrafillFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, HIPS Extrafill14 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2000 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 26 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 40 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2100 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 40 MPap. 1: Flexural strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 130 kJ/m2p. 1: Charpy impact strength | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: unnotched |
| Charpy impact strength orientation not stated | 17 kJ/m² | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 180 J/mp. 1: Izod impact strength | ASTM D256As the sheet prints it: ASTM D256-A | not in the median: in J/m |
| HDT at 1.8 MPa | 85 °Cp. 1: Heat distortion temperature | ISO 75As the sheet prints it: 1,8 MPa ISO 75 | in the median |
| Vicat softening temperature | 88,5 °Cp. 1: Vicat softening temperature | ISO 306 | |
| Density | 1,05 g/cm3p. 1: Material density | ISO 1183 | |
| Water absorption | < 0,1 %p. 1: Water adsorption | ISO 62As the sheet prints it: ISO 62; method A | |
| Melt volume-flow rate | 9,5 cm³/10 minp. 1: Melt volume index | ISO 1133As the sheet prints it: ISO 1133; 5 kg | |
| Dielectric strength | 155 kV/mmp. 1: Dielectric strength | IEC 243As the sheet prints it: IEC 243/1 | |
Print settings
- Nozzle
- 230–250 °Cown data sheet
- Bed
- 90–105 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 70 °C for ≥ 3 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 230–250 °C; Bed 90–105 °CFillamentum, HIPS Extrafillp. 1: Recommended printing settings; p. 1: Bed adhesive
- Drying 70 °C; minimum drying time 3 h; the need to dry 1 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row HIPS EXTRAFILL; own minimum-time/temperature/need columns, with p1 restrictions
Price
Not in the price sample.
Its 3 documents
What the maker says (8)
- Good for
The material complies with the requirements for materials intended to come into contact with food.
Fillamentum, HIPS Extrafillp. 1 - Good for
HIPS may be used for the food and packaging industry.
Fillamentum, HIPS Extrafillp. 1 - Benefits
HIPS may also offer good mechanical properties, such as strength, impact resistance, toughness or heat resistance.
Fillamentum, HIPS Extrafillp. 1 - Benefits
It has great dielectric strength and resistivity.
Fillamentum, HIPS Extrafillp. 1 - Odour and emissions
During printing of HIPS filament small quantities of styrene is released into the atmosphere.
Fillamentum, HIPS Extrafillp. 1 - Supports and removal
The filament made of HIPS can be used for printing of support parts, but also for functional objects.
Fillamentum, HIPS Extrafillp. 1 - Supports and removal
Support parts are easily dissolvable in Lemonesol, which doesn’t influence your printed object.
Fillamentum, HIPS Extrafillp. 1 - Supports and removal
HIPS has good adhesion to other materials and nice surface on the interface.
Fillamentum, HIPS Extrafillp. 1
FormFutura EasyFil HIPSStrength XY, MPa22Strength Z, MPa—Modulus XY, GPa1.55Charpy notched, kJ/m²15HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–260Bed, °C80–100Chamber, °C—Drying, °C, h—
FormFutura EasyFil HIPSFormFutura
Data sheet shared with FormFutura LimoSolve: their values are one table, recorded once.
Sold as toughened or impact-modified: "It also has a higher impact resistance than regular HIPS filaments." (FormFutura, EasyFil HIPS, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet EasyFil™ HIPS12 valuesThe same values also in FormFutura, Technical Data Sheet LimoSolve™.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1550 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 22 Mpap. 1: Tensile strengthalso in FormFutura, Technical Data Sheet LimoSolve™ | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 50 %p. 1: Elongation at break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2126 Mpap. 1: Flexural modulus ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 51.2 Mpap. 1: Flexural strength ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 15 KJ/m²p. 1: Impact strength | ISO 179tested at 23° C (73° F)notched | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 89° C °Cp. 1: Viscat softening temp. | ASTM D1525As the sheet prints it: ASTM D1525; B/2 (120° C/h, 50N) | |
| Melting temperature | 180 - 260° C °Cp. 1: Melting termperature | ISO 294 | |
| Density | 1.04 g/ccp. 1: Specific gravity | ISO 1183 | |
| Water absorption | 0,1 %p. 1: Water absorptionalso in FormFutura, Technical Data Sheet LimoSolve™ | ISO 62As the sheet prints it: ISO 62 Saturated at 23° C | |
| Water absorption | 0.1 %p. 1: Moisture absorption | ISO 62As the sheet prints it: ISO62 Equilibrium 23° C/50% RH | |
| Melt volume-flow rate | 3.4 cm³/10minp. 1: Melt flow rate | ISO 1133As the sheet prints it: ISO 1133; 5Kg | |
| FormFutura, Technical Data Sheet LimoSolve™1 value | |||
| Charpy impact strength orientation not stated | 15 KJ/m²p. 1: Impact strength | ISO 179As the sheet prints it: ISO 179; Charpy Notched @23° C (73° F) | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 220–260 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, EasyFil HIPS.
Its 2 print profiles, in the documents' words
- Nozzle ± 220 - 260° CFormFutura, Technical Data Sheet EasyFil™ HIPSp. 1: Recommended printing settings
- Nozzle ± 230 – 245° C; Bed ± 80 – 100° CFormFutura, EasyFil HIPSp. 1: General printing guidelines
Price
Not in the price sample.
Its 4 documents
What the maker says (19)
- Benefits
Being slightly softer and more flexible than “normal” HIPS filaments - in combination with very limited warping, an excellent thermal stability and flowing behaviour - make EasyFil™ HIPS a truly “easy-to-print” 3D printer filament.
FormFutura, Technical Data Sheet EasyFil™ HIPSp. 1 - Benefits
EasyFil™ HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly.
FormFutura, Technical Data Sheet EasyFil™ HIPSp. 1 - Surface finish
EasyFil™ HIPS printed object will have a really beautiful matt coloured finish.
FormFutura, Technical Data Sheet EasyFil™ HIPSp. 1 - Good for
EasyFil HIPS is a versatile high-performance Polystyrene type of 3D printer filament that can be used for 3D printing light and durable parts with a matt surface finish.
FormFutura, EasyFil HIPSp. 1 - Benefits
EasyFil HIPS is a high-performance and easy to print filament.
FormFutura, EasyFil HIPSp. 1 - Benefits
It is slightly softer and more flexible than a regular HIPS (High Impact PolyStyrene) filament.
FormFutura, EasyFil HIPSp. 1 - Benefits
It also has a higher impact resistance than regular HIPS filaments.
FormFutura, EasyFil HIPSp. 1 - Benefits
EasyFil HIPS is chemically inert and has outstanding characteristics with respect to hygiene.
FormFutura, EasyFil HIPSp. 1 - Benefits
It has a high strength and heat resistance and it prints really smoothly.
FormFutura, EasyFil HIPSp. 1 - Surface finish
Fine details and an extremely matte surface finish can be achieved with the material.
FormFutura, EasyFil HIPSp. 1 - Benefits
Parts printed with the material are light-weight and can easily be glued together with a variety of adhesives.
FormFutura, EasyFil HIPSp. 1 - Warping and shrinkage
Very limited warping
FormFutura, EasyFil HIPSp. 1 - Benefits
High impact resistance
FormFutura, EasyFil HIPSp. 1 - Surface finish
Extremely smooth matte surface finish
FormFutura, EasyFil HIPSp. 1 - Benefits
Light-weight and durable
FormFutura, EasyFil HIPSp. 1 - Benefits
High ESCR resistance
FormFutura, EasyFil HIPSp. 1 - Benefits
Engineered to meet UL 94HB flame retardancy standards
FormFutura, EasyFil HIPSp. 1 - Benefits
Easily to glue with various adhesives
FormFutura, EasyFil HIPSp. 1 - Printing advice
HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives
FormFutura, EasyFil HIPSp. 1
FormFutura LimoSolveStrength XY, MPa22Strength Z, MPa—Modulus XY, GPa1.55Charpy notched, kJ/m²15HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–260Bed, °C90–110Chamber, °C—Drying, °C, h—
FormFutura LimoSolveFormFutura
Data sheet shared with FormFutura EasyFil HIPS: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 220–260 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle ± 220 - 260° CFormFutura, Technical Data Sheet LimoSolve™p. 1: Print temperature
- Nozzle ± 220 - 260° C; Bed ± 90 - 110° CFormFutura, LimoSolvep. 1: General printing guidelines
Price
Not in the price sample.
Its 3 documents
What the maker says (12)
- Supports and removal
LimoSolve™ doesn’t contain any added colorants and dissolves completely in Limonene.
FormFutura, Technical Data Sheet LimoSolve™p. 1 - Supports and removal
This feature in combination with its similar thermal properties to ABS makes LimoSolve™ an outstanding supporting material for complex dual extrusion ABS prints.
FormFutura, Technical Data Sheet LimoSolve™p. 1 - Benefits
LimoSolve HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament which doesn’t contain any added colorants and dissolves completely in Limonene.
FormFutura, LimoSolvep. 1 - Supports and removal
Being soluble in Limonene in combination with similar thermal properties to ABS make LimoSolve an outstanding supporting material for complex dual extrusion ABS prints.
FormFutura, LimoSolvep. 1 - Surface finish
When not being used as support material LimoSolve HIPS prints in an extremely bright white colour and has exactly the same characteristics as our EasyFil HIPS filament range.
FormFutura, LimoSolvep. 1 - Supports and removal
Good support material for dual extrusion ABS prints
FormFutura, LimoSolvep. 1 - Benefits
Similar thermal and printing properties to ABS
FormFutura, LimoSolvep. 1 - Supports and removal
Soluble in Limonene
FormFutura, LimoSolvep. 1 - Warping and shrinkage
Very limited warping
FormFutura, LimoSolvep. 1 - Benefits
High impact resistance
FormFutura, LimoSolvep. 1 - Surface finish
Extremely smooth, bright white and matte surface finish
FormFutura, LimoSolvep. 1 - Benefits
Light-weight and durable
FormFutura, LimoSolvep. 1
Nanovia HIPSStrength XY, MPa16Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²11HDT 0.45, °C—HDT 1.8, °C74Price, CAD/kg—Nozzle, °C230–250Bed, °C90–110Chamber, °C90Drying, °C, h604 h
Nanovia HIPSNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia HIPS : Soluble support : Nanovia9 values | |||
| Tensile modulus XY | 2000 MPap. 1: Young’s modulus (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile modulus orientation not stated | 1990 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 16 MPap. 1: Ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile strain at strength XY | 1 %p. 1: Elongation ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | listed under other properties |
| Tensile strain at strength orientation not stated | 1 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | listed under other properties |
| Charpy impact strength | 11 kJ/m2p. 1: Impact Charpy (notched) Thermal properties | ISO 179As the sheet prints it: ISO 179/1eA | in the median |
| HDT at 1.8 MPa | 74 °Cp. 1: HDT 1,8 MPa | ISO 75As the sheet prints it: 1,8 MPa ISO 75-2A | in the median |
| Glass transition temperature | 100 °Cp. 1: Tg | no standard stated | in the median |
| Density | 1.04 g/cm3p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 230–250 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- 90 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 230 – 250 °C; Bed 90 – 110 °C; Chamber 90 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 3 documents
What the maker says (11)
- Benefits
Easy to print
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1 - Benefits
HIPS also has a very good impact resistance.
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1 - Precision and tolerance
Its viscosity allows for smooth and precise 3D prints.
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1 - Supports and removal
Nanovia HIPS is a soluble support filament that uses a natural citrus based hydrocarbon called Limonene.
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1 - Supports and removal
It’ close to ABS 3D printing settings makes it ideal for support structures for the latter as well as PA.
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1 - Supports and removal
Nanovia HIPS can also be used as both a support, and raft material.
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1 - Supports and removal
Competible with most materials it allows for the easy removal from the 3D printer bed and is soluble in limonene, an extract of essential citrus oils.
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1 - Supports and removal
Nanovia HIPS used as a support material can be removed manually or dissolved using limonene.
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1: Application recommendations, Post treatment support removal - Supports and removal
Supports in 3D printing need to be removed manually a posteriori, which may leave marks and can take time for more complex structures.
Nanovia, Nanovia HIPS as a soluble support material for 3D printingp. 1: Opening manual-removal limitation - Good for
High Impact Polystyrene (HIPS), as its name indicates, has a very high shock resistance. This resistance also makes it suited as a base 3D printing material, especially for press tools.
Nanovia, Nanovia HIPS as a soluble support material for 3D printingp. 1: General HIPS use paragraph - Supports and removal
When submerged in limonene, HIPS completely dissolves in about 24 hours, and doesn’t leave any residue.
Nanovia, Nanovia HIPS as a soluble support material for 3D printingp. 1: Limonene dissolution paragraph
Chemicals and environment (2)
- Post-processing: described in words
HIPS after 24h submersion in limonene
Nanovia, Nanovia HIPS : Soluble support : Nanoviap. 1: Application recommendations, figure caption - Application notes: described in words
Nanovia PP CF, despite the added cabron fibres, still has a tendency to unstick from the printing surface. By adding a soluble HIPS raft and supports the polypropylene is held in place.
Nanovia, Nanovia HIPS as a soluble support material for 3D printingp. 1: Opening pictured raft caption
Stratasys FDM HIPSStrength XY, MPa—Strength Z, MPa23.5Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C103HDT 1.8, °C102Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
Stratasys FDM HIPSStratasys
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Stratasys, FDM HIPS Data Sheet38 valuesUnless a row says otherwise: printed specimenprint settings0.010 in. (0.254 mm) layer height on the Fortus 450mc and F900 | |||
| Tensile modulus Z (ZX) | 1.93 (0.035) GPap. 4: Modulus (Elastic) GPa (ZX) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | in the median |
| Tensile modulus Z (ZX) | 1.93 (0.019) GPap. 5: Modulus (Elastic) GPa (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: another value of this product is in it |
| Tensile modulus XZ | 1.98 (0.013) GPap. 4: Modulus (Elastic) GPa (XZ) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile modulus XZ | 1.99 (0.015) GPap. 5: Modulus (Elastic) GPa (XZ) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile yield strength Z (ZX) | 23.5 (0.36) MPap. 4: Yield Strength MPa (ZX) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | in the median |
| Tensile yield strength Z (ZX) | 22.7 (0.41) MPap. 5: Yield Strength MPa (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: another value of this product is in it |
| Tensile yield strength XZ | 26.0 (0.36) MPap. 4: Yield Strength MPa (XZ) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XZ | 25.7 (0.20) MPap. 5: Yield Strength MPa (XZ) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile break strength Z (ZX) | 20.3 (0.69) MPap. 4: Strength @ Break MPa (ZX) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: another value of this product is in it |
| Tensile break strength Z (ZX) | 21.2 (1.3) MPap. 5: Strength @ Break MPa (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: another value of this product is in it |
| Tensile break strength XZ | 19.6 (0.46) MPap. 4: Strength @ Break MPa (XZ) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: measured on a bar in another orientation |
| Tensile break strength XZ | 19.1 (0.44) MPap. 5: Strength @ Break MPa (XZ) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Elongation at break Z (ZX) | 2.8 (0.44) %p. 4: Elongation @ Break % (ZX) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | in the median |
| Elongation at break Z (ZX) | 2.2 (0.95) %p. 5: Elongation @ Break % (ZX) | ASTM D638As the sheet prints it: ASTM D638; printer=F900; tip=T16 | not in the median: another value of this product is in it |
| Elongation at break XZ | 8.7 %p. 4: Elongation @ Break % (Table 3, Fortus 450mc - T16 Tip, XZ Orientation) | ASTM D638 | not in the median: measured on a bar in another orientation |
| Elongation at break XZ | 10.0 %p. 5: Elongation @ Break % (Table 4, F900 - T16, XZ Orientation) | ASTM D638 | not in the median: measured on a bar in another orientation |
| Elongation at yield Z (ZX) | 1.5 (0.030) %p. 4: Elongation @ Yield % (ZX) | ASTM D638As the sheet prints it: ASTM D638; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | listed under other properties |
| Elongation at yield XZ | 1.6 %p. 4: Elongation @ Yield % (Table 3, Fortus 450mc - T16 Tip, XZ Orientation) | ASTM D638 | listed under other properties |
| Elongation at yield XZ | 1.5 %p. 5: Elongation @ Yield % (Table 4, F900 - T16, XZ Orientation) | ASTM D638 | listed under other properties |
| Flexural modulus XZ | 2.24 (0.028) GPap. 4: Modulus GPa (XZ) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 1.85 (0.043) GPap. 4: Modulus GPa (ZX) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural modulus XZ | 2.17 (0.030) GPap. 5: Modulus GPa (XZ) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 1.83 (0.042) GPap. 5: Modulus GPa (ZX) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural strength XZ | 50.8 (0.54) MPap. 4: Peak Stress MPa (XZ) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 44.0 (1.2) MPap. 4: Peak Stress MPa (ZX) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; layer height=0.254 mm; printer=Fortus 450mc; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural strength XZ | 52.2 (0.58) MPap. 5: Peak Stress MPa (XZ) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 42.0 (1.0) MPap. 5: Peak Stress MPa (ZX) | ASTM D790As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16 | not in the median: measured on a bar in another orientation |
| Izod impact strength XZ | 74.7 (3.7) J/mp. 4: Notched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=XZ Orientation; printer=Fortus 450mc; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| Izod impact strength ZX | 44.6 (5.3) J/mp. 4: Notched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=ZX Orientation; printer=Fortus 450mc; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| Izod impact strength XZ | 827 (190) J/mp. 4: Unnotched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=XZ Orientation; printer=Fortus 450mc; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| Izod impact strength ZX | 132 (11) J/mp. 4: Unnotched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=ZX Orientation; printer=Fortus 450mc; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| Izod impact strength XZ | 67.6 (3.2) J/mp. 5: Notched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=XZ Orientation; printer=F900; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| Izod impact strength ZX | 39.1 (5.2) J/mp. 5: Notched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=ZX Orientation; printer=F900; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| Izod impact strength XZ | 374 (97) J/mp. 5: Unnotched (XZ) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=XZ Orientation; printer=F900; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| Izod impact strength ZX | 102 (11) J/mp. 5: Unnotched (ZX) | ASTM D256, ASTM D4812As the sheet prints it: ASTM D256, ASTM D4812; column=ZX Orientation; printer=F900; tip=T16; layer_height=0.010 in. (0.254 mm) | not in the median: in J/m |
| HDT XY, at 0.45 MPa | 102.8 °Cp. 3: HDT @ 66 psi | ASTM D648As the sheet prints it: 66 psi ASTM D648 | in the median |
| HDT XY, at 1.8 MPa | 102.1 °Cp. 3: HDT @ 264 psi | ASTM D648As the sheet prints it: 264 psi ASTM D648 | in the median |
| Glass transition temperature | 101 °C (214 °F)p. 3: Tg | specimen not stated, ASTM D7426As the sheet prints it: ASTM D7426 Inflection Point | in the median |
Print settings
No print settings on file for this product.
What the maker says (2)
- Good for
It offers similarities to ABS but has high impact resistance making it suitable for printing lower-requirement jigs, fixtures and prototypes at a reduced cost.
Stratasys, FDM HIPS Data Sheetp. 2 - Benefits
FDM® HIPS (high-impact polystyrene) is a low-cost, general-use 3D printing thermoplastic.
Stratasys, FDM HIPS Data Sheetp. 2
Fabru High impact Polystyrol (HIPS)Strength XY, MPa16Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²—HDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C70–100Chamber, °C—Drying, °C, h752 h
Fabru High impact Polystyrol (HIPS)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, High impact Polystyrol (HIPS)8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2000 MPap. 1: Tensile modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 16 MPap. 1: Yield stress (ISO 527-2/5) | ISO 527As the sheet prints it: ISO 527-2/5 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 50 %p. 1: Elongation at break (ISO 527-2/5) | ISO 527As the sheet prints it: ISO 527-2/5 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 1.5 %p. 1: Elongation at yield (ISO 527-2/5) | ISO 527As the sheet prints it: ISO 527-2/5 | listed under other properties |
| HDT at 0.45 MPa | 88 °Cp. 1: Heat deflection temperature | ISO 75As the sheet prints it: 0.45 MPa (ISO 75-2/B) | in the median |
| Vicat softening temperature | 96 °Cp. 1: Vicat softening temperature A | no standard stated | |
| Density | 1.05 g/cm3p. 1: Density (ISO 1183) | ISO 1183 | |
| Melt mass-flow rate | 12 g/10minp. 1: MFR (ISO 1133) | ISO 1133 | |
Print settings
- Nozzle
- 210–260 °Cown data sheet
- Bed
- 70–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 75 °C for 2 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-260 °C; Bed 70-100 °C; Drying 75 °C | 2 hFabru, High impact Polystyrol (HIPS)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
Not in the price sample.
Its 2 documents
What the maker says (11)
- Benefits
high impact strength up to temperatures of -40 ° C
Fabru, High impact Polystyrol (HIPS)p. 1 - Pitfalls and limitations
Soluble in many solvents
Fabru, High impact Polystyrol (HIPS)p. 1 - Pitfalls and limitations
Bad weather and UV resistance (not suitable for outdoor use)
Fabru, High impact Polystyrol (HIPS)p. 1 - Surface finish
Finished parts can, for example, ideally be painted with acrylic varnishes.
Fabru, High impact Polystyrol (HIPS)p. 1 - Odour and emissions
odorless and tasteless
Fabru, High impact Polystyrol (HIPS)p. 1 - Supports and removal
In the area of 3D printing, the material can be used directly as building material or as support material.
Fabru, High impact Polystyrol (HIPS)p. 1 - Supports and removal
If HIPS is used as support material for overhangs, a second nozzle package is required.
Fabru, High impact Polystyrol (HIPS)p. 1 - Supports and removal
After printing a combination of e.g. ABS and HIPS as support material or PLA and HIPS as support material, the unfinished construct can be placed in D-limonene or orange terpetene solvent.
Fabru, High impact Polystyrol (HIPS)p. 1 - Supports and removal
After a few hours, only the finished part made of ABS, PLA or whatever is left.
Fabru, High impact Polystyrol (HIPS)p. 1 - Supports and removal
The HIPS filament dissolves without residue.
Fabru, High impact Polystyrol (HIPS)p. 1 - Supports and removal
We recommend using HIPS nature, otherwise there may be paint residues on the good part.
Fabru, High impact Polystyrol (HIPS)p. 1
eSUN HIPSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–270Bed, °C100–115Chamber, °C—Drying, °C, h—
eSUN HIPSeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, HIPS Technical Data Sheet6 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 27 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 55 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2280 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 39 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 11 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| Density | 1.05 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 230–270 °Cown data sheet
- Bed
- 100–115 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 230-270℃; Bed 100 - 115°CeSUN, HIPS Technical Data Sheetp. 2: Recommended printing settings; p. 2: Printing notes
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Supports and removal
It is a printing material that is completely soluble in limonene, there will be no residue on the surface of the model after dissolution, and the contact surface is smooth and flat; its printing performance is similar to ABS, and can be used for ABS, PETG and other materials to print extremely complex shapes or a supporting material having the shape of a partially enclosed chamber; suitable for multi-nozzle printers.
eSUN, HIPS Technical Data Sheetp. 1 - Warping and shrinkage
HIPS has a large shrinkage rate, so you should pay attention to heat preservation when printing, and print in a printer with a closed chamber.
eSUN, HIPS Technical Data Sheetp. 2 - Supports and removal
It is recommended to set the distance between the support and the model to 0, the first contact layer to slow down and turn off the blowing fan to improve the bonding strength with the main material.
eSUN, HIPS Technical Data Sheetp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.