PET

7 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
Izod where no Charpy is published
sold as toughened
added filler or additive
not published

How the numbers are worked out

FormFutura High Precision PETStrength XY, MPa59.4Modulus XY, GPa2.56Charpy notched, kJ/m²1.7HDT 0.45, °C—HDT 1.8, °C66Price, CAD/kg—Nozzle, °C235–260Bed, °C80–90Chamber, °CnoneDrying, °C, h45–606 h

FormFutura High Precision PETFormFutura

Published values

Property	As published	Conditions	On the Overview
FormFutura, High Precision PET — technical data sheet14 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2564 MPap. 1: Tensile modulus	ISO 527 As the sheet prints it: ISO 527-2	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	59.4 MPap. 1: Tensile yield strength	ISO 527 As the sheet prints it: ISO 527-2	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	54.3 MPap. 1: Tensile break strength	ISO 527 As the sheet prints it: ISO 527-2	not in the median: another value of this product is in it
Elongation at break orientation not stated	5.2 %p. 1: Elongation at break	ISO 527 As the sheet prints it: ISO 527-2	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	2.9 %p. 1: Elongation at yield	ISO 527 As the sheet prints it: ISO 527-2	listed under other properties
Flexural modulus orientation not stated	2621 MPap. 1: Flexural modulus	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	87.5 MPap. 1: Flexural strength	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength orientation not stated	1.7 kJ/m²p. 1: Charpy strength notched	ISO 179 As the sheet prints it: ISO 179-1, Charpy notched, 23°C tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Hardness orientation not stated	75.3 Shore Dtranscription correctedp. 1: "Rockwell hardness" row (mislabeled in source - value carries a Shore D unit)	no standard stated	in the median
HDT orientation not stated, at 1.8 MPa	65.7 °Cp. 1: HDT	ISO 75 As the sheet prints it: ISO 75-2, HDT A	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature orientation not stated	70 °Cp. 1: Glass transition temperature	DSC As the sheet prints it: DSC 10°C/min	in the median
Vicat softening temperature orientation not stated	65.9 °Cp. 1: Vicat softening temperature	ISO 306
Density orientation not stated	1.34 g/cm³p. 1: Density	no standard stated
Melt mass-flow rate	47 g/10minp. 1: Melt flow rate	ISO 1133 As the sheet prints it: ISO 1133; 2,16 kg tested at 285 °C

Print settings

Nozzle: 235–260 °Cown data sheet
Bed: 80–90 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 45–60 °C for 6 hown data sheet
Hardened nozzle: not stated

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): enclosure in FormFutura, High Precision PET.

Its 2 print profiles, in the documents' words

Nozzle 235-260°C; Bed 80-90°C; Drying 45-60°C for 6 h; requiredFormFutura, High Precision PET — technical data sheetRecommended printing settings
Nozzle ± 235 – 260° C; Bed ± 80 – 90° CFormFutura, High Precision PETp. 1: Nozzle size; p. 1: Enclosure needed; p. 1: Print temp; p. 1: Heat bed

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Precision and toleranceThe filament has guaranteed precision on diameter, ovality, shrinkage, and color tolerances.FormFutura, High Precision PETp. 1

Chemicals and environment (2)

Application notes: described in words3D Prints details with a high resolution and high surface qualityFormFutura, High Precision PET — technical data sheetp. 1: Suitable applications; scanned original visually reread
Print quality: described in wordsSpool-specific filament certificate does not certify the printed part tolerance.FormFutura, High Precision PET — technical data sheetPrint quality

3D4Makers Facilan HTStrength XY, MPa62Modulus XY, GPa2.1Charpy notched, kJ/m²3IzodHDT 0.45, °C89HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–250Bed, °C75–85Chamber, °C—Drying, °C, h—

3D4Makers Facilan HT3D4Makers

Published values

Property	As published	Conditions	On the Overview
3D4Makers, Facilan™ HT Filament6 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2100 MPap. 1: Tensile Modulus	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	62 MPap. 1: Tensile Strength	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	7 %p. 1: Elongation at Yield	no standard stated	listed under other properties
Izod impact strength orientation not stated	3 kJ/m2p. 1: IZOD Impact Strength (notched)	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Hardness	76 Shore Dp. 1: Shore D Hardness	no standard stated	in the median
Glass transition temperature	100°Cp. 1: High Tg Copolyester	no standard stated	in the median
3D4Makers, Technical Data Sheet 3D Printing Filament Facilan™ HT4 valuesThe same values also in 3D4Makers, Facilan™ HT Filament.Unless a row says otherwise: printed specimen (implied by the document)
Flexural modulus orientation not stated	2300 MPap. 1: Flexural Modulus	ISO 178	in the median
Flexural strength orientation not stated	85 MPap. 1: Flexural Strength	ISO 178	in the median
HDT at 0.45 MPa	89°Cp. 1: Heat Deflection Temperaturealso in 3D4Makers, Facilan™ HT Filament	ISO 75 As the sheet prints it: ISO 75 B**; heating rate=120 K/h	in the median
Density	1.3 g/cm³p. 1: Density	specimen not stated, ISO 1183 As the sheet prints it: ISO1183-1

Print settings

Nozzle: 240–250 °Cown data sheet
Bed: 75–85 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Its 2 print profiles, in the documents' words

Nozzle 240-250°C; Bed 75-85°C3D4Makers, Technical Data Sheet 3D Printing Filament Facilan™ HTp. 1: Recommended printing settings: NozzleTemperature; p. 1: Bed Adhesion
Nozzle 240 - 250 °C; Bed 75 - 85 °C3D4Makers, Facilan™ HT Filamentp. 1: Bed Temperature; p. 1: Adhesion; p. 1: Print Temperature

Price

Not in the price sample.

Its 3 documents

What the maker says (5)

Surface finishHigh gloss and shiny surface.3D4Makers, Facilan™ HT Filamentp. 1
BenefitsHigh Tg Copolyester (100°C), superior to PETG and PLA3D4Makers, Facilan™ HT Filamentp. 1
BenefitsHigh tensile strength, superior to PETG and ABS3D4Makers, Facilan™ HT Filamentp. 1
BenefitsThanks to Facilan ™ HT superior heat resistance, it enables more durable applications for heat sensitive applications.3D4Makers, Facilan™ HT Filamentp. 1
BenefitsIts high strength can optimize 3D designs with low infill for faster print job and thin wall with high rigidity of the parts.3D4Makers, Facilan™ HT Filamentp. 1

colorFabb PET HIGH SPEED PROStrength XY, MPa52.6Modulus XY, GPa2.08Charpy notched, kJ/m²1.2HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–260Bed, °C60Chamber, °C—Drying, °C, h—

colorFabb PET HIGH SPEED PROcolorFabb

Sold as toughened or impact-modified: "PET HIGH SPEED PRO offers increased flexibility and impact resistance , allowing printed parts to withstand bending, deformation and sudden mechanical loads more effectively." (colorFabb, PET HIGH SPEED PRO CLEAR, p. 1). The maker's statement, not a test result.

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet PET HIGH SPEED PRO7 valuesUnless a row says otherwise: printed specimen print settings The specimens have been printed in XY plane, using 0,2 mm layer height, 100% infill, 0,4 mm nozzle, 240˚C nozzle temperature and 60˚C bed temperature.
Tensile modulus XY	2080 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A	in the median
Tensile strength (yield or break not stated) XY	52,6 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A	in the median
Elongation at break XY	8,6 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A	in the median
Flexural modulus XY	2192 MPap. 1: Flexural Modulus Flexural, ISO 178	ISO 178	in the median
Flexural strength XY	91,1 MPap. 1: Flexural Strength Flexural, ISO 178	ISO 178	in the median
Charpy impact strength XY	1,2 kJ/m2p. 1: Impact Strength Charpy Notched, ISO 179	ISO 179print settings not stated	in the median
Glass transition temperature	67,6 °Cp. 1: Glass Transition Temp. DSC, ISO 11357	moulded bar (resin supplier's value), ISO 11357print settings not stated	not in the median: the resin supplier's value, not a printed part

Print settings

Nozzle: 230–260 °Cown data sheet
Bed: 60 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Its 2 print profiles, in the documents' words

Nozzle 230 - 260 °C; Bed 60 °CcolorFabb, Technical datasheet PET HIGH SPEED PROp. 2: Recommended printing settings; p. 2: Bed / surface modification
Nozzle 230-260°C; Bed 60°CcolorFabb, PET HIGH SPEED PRO CLEARp. 1: Advised 3D printing temperature; p. 1: Advised Heated bed

Price

Not in the price sample.

Its 3 documents

What the maker says (23)

Warping and shrinkageMinimal warping and easy printabilitycolorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsPET HIGH SPEED PRO offers increased flexibility and impact resistance , allowing printed parts to withstand bending, deformation and sudden mechanical loads more effectively.colorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsHigh-speed filament with increased toughnesscolorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsPET HIGH SPEED PRO Clear is an advanced technical filament that combines high-speed printability, excellent impact resistance, minimal warping and a premium high-gloss finish .colorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsIts balanced mechanical properties provide additional flexibility and toughness, making printed parts more resistant to bending, deformation and sudden impacts.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forDeveloped for high-speed 3D printingcolorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forPET HIGH SPEED PRO is designed for fast and reliable material extrusion .colorFabb, PET HIGH SPEED PRO CLEARp. 1
Precision and toleranceIts excellent processing behaviour enables high printing speeds while maintaining consistent extrusion, dimensional accuracy and a high-quality surface finish.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forThanks to its wide processing window , the material is suitable for both modern high-speed 3D printers and conventional printing systems.colorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsThis enables increased productivity without compromising print quality or reliability.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Pitfalls and limitationsThe material is not intended to behave like a very soft or highly flexible filament.colorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsInstead, it retains a strong structural character while providing additional toughness.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forThis makes it an excellent choice for semi-rigid applications and hard-shell components where both stability and impact resistance are important.colorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsPET HIGH SPEED PRO is designed to be exceptionally easy to print .colorFabb, PET HIGH SPEED PRO CLEARp. 1
Warping and shrinkageIts very low tendency to warp helps maintain dimensional accuracy, including when printing larger components and geometries where deformation can otherwise become problematic.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forThe combination of easy processing, minimal warping and a wide processing window makes PET HIGH SPEED PRO suitable for a broad range of printers and applications.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Surface finishIn addition to its mechanical and processing benefits, PET HIGH SPEED PRO produces an attractive high-gloss finish .colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forThis makes it particularly suitable for applications where both performance and appearance are important.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forPotential applications include hard-shell parts, protective covers, enclosures, lampshades, vases, decorative objects and functional components that require toughness, dimensional stability and a premium surface finish.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forParticularly suitable for: Hard-shell parts, protective components, lampshades, vases, enclosures and high-speed functional printing.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forPET HIGH SPEED PRO Clear is a high-performance filament developed for fast and reliable 3D printing of tough functional parts.colorFabb, PET HIGH SPEED PRO CLEARp. 1
BenefitsIt combines excellent printability with increased flexibility, high impact resistance, minimal warping and a premium high-gloss finish.colorFabb, PET HIGH SPEED PRO CLEARp. 1
Good forIts wide processing window and suitability for high printing speeds make it an excellent choice for hard-shell parts, lampshades, vases and demanding functional components.colorFabb, PET HIGH SPEED PRO CLEARp. 1

colorFabb PET ULTRA HIGH SPEEDStrength XY, MPa64.2Modulus XY, GPa2.41Charpy notched, kJ/m²—HDT 0.45, °C68HDT 1.8, °C—Price, CAD/kg—Nozzle, °C280–320Bed, °C60Chamber, °C—Drying, °C, h—

colorFabb PET ULTRA HIGH SPEEDcolorFabb

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet PET ULTRA HIGH SPEED8 values
Tensile modulus XY	2410 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0,2 mm layer height, 100% infill, 0,4 mm nozzle, 300˚C nozzle temperature and 60˚C bed temperature.	in the median
Tensile strength (yield or break not stated) XY	64,2 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0,2 mm layer height, 100% infill, 0,4 mm nozzle, 300˚C nozzle temperature and 60˚C bed temperature.	in the median
Elongation at break XY	7,0 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0,2 mm layer height, 100% infill, 0,4 mm nozzle, 300˚C nozzle temperature and 60˚C bed temperature.	in the median
Flexural modulus XY	2829 MPap. 1: Flexural Modulus Flexural, ISO 178	ISO 178 print settings The specimens have been printed in XY plane, using 0,2 mm layer height, 100% infill, 0,4 mm nozzle, 300˚C nozzle temperature and 60˚C bed temperature.	in the median
Flexural strength XY	107,6 MPap. 1: Flexural Strength Flexural, ISO 178	ISO 178 print settings The specimens have been printed in XY plane, using 0,2 mm layer height, 100% infill, 0,4 mm nozzle, 300˚C nozzle temperature and 60˚C bed temperature.	in the median
HDT at 0.45 MPa	68* °Cp. 1: Heat Deflection Temp.	ISO 75 As the sheet prints it: HDT-B, ISO 75; method=B	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	67,6 °Cp. 1: Glass Transition Temp. DSC, ISO 11357	ISO 11357	not in the median: the resin supplier's value, not a printed part
Melt mass-flow rate	178* g/10minp. 1: Melt Flow Index	ISO 1133 As the sheet prints it: MFI, ISO 1133-A; 2.16 kg tested at 285 °C

Print settings

Nozzle: 280–320 °Cown data sheet
Bed: 60 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 280-320 °C; Bed 60 °CcolorFabb, Technical datasheet PET ULTRA HIGH SPEEDp. 2: Recommended printing settings; p. 2: Bed / surface modification

Price

Not in the price sample.

Its 2 documents

FormFutura EasyFil PETStrength XY, MPa74Modulus XY, GPa2.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–245Bed, °C80–90Chamber, °CnoneDrying, °C, hdry first

FormFutura EasyFil PETFormFutura

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet EasyFil PET9 valuesUnless a row says otherwise: specimen not statedtested at 23°C
Tensile modulus orientation not stated	2500 MPap. 1: Tensile modulus (23°C, 1mm/min)	ISO 527 As the sheet prints it: 23°C 1mm/min ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	74 MPap. 1: Tensile strength at yield (23°C, 50mm/min)	ISO 527 As the sheet prints it: 23°C 50mm/min ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	74 Mpap. 1: Tensile strength at break (23°C, 50mm/min)	ISO 527 As the sheet prints it: 23°C 50mm/min ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	4 %p. 1: Elongation at tensile break (23°C, 50mm/min)	ISO 178 As the sheet prints it: 23°C 50mm/min ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	4 %p. 1: Elongation at tensile yield (23°C, 50mm/min)	ISO 527 As the sheet prints it: 23°C 50mm/min ISO 527	listed under other properties
Charpy impact strength	22,4 kJ/m2p. 1: Charpy unnotched impact strength, 23°C	ISO 179 As the sheet prints it: 23°C ISO 179/1eU	not in the median: unnotched
Glass transition temperature	70 °Cp. 1: Glass Transition Temperature	no standard statedtest temperature not stated	in the median
Density	1.33 g/cm3p. 1: Density	ISO 1183 As the sheet prints it: ISO 1183/A test temperature not stated
Melt mass-flow rate	47 ± 8 g/10 minp. 1: Melt Volume Rate, 285°C/2,16kg	ISO 1133 As the sheet prints it: ISO 1133; 2,16kg tested at 285 °C

Print settings

Nozzle: 230–245 °Cown data sheet
Bed: 80–90 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: required, schedule not statedown data sheet
Hardened nozzle: not stated

Its 2 print profiles, in the documents' words

Drying it is recommended to dry the material prior to usage and to 3D print it directly from a dry boxFormFutura, Technical Data Sheet EasyFil PETp. 1: Storage and handling
Nozzle ± 230 – 245° C; Bed ± 80 – 90° CFormFutura, EasyFil PETp. 1: General printing guidelines

Price

Not in the price sample.

Its 3 documents

What the maker says (8)

Good forThis makes EasyFil PET ideal for 3D printing big objects with fine detail.FormFutura, Technical Data Sheet EasyFil PETp. 1
Good for3D printing manufacturing aids.FormFutura, Technical Data Sheet EasyFil PETp. 1
BenefitsHigh transparency.FormFutura, Technical Data Sheet EasyFil PETp. 1
BenefitsEasyFil PET is as easy to 3D print as regular PLA.FormFutura, Technical Data Sheet EasyFil PETp. 1
BenefitsStronger and more accurate than traditional PETG.FormFutura, Technical Data Sheet EasyFil PETp. 1
Warping and shrinkageIt 3D prints with almost no warping.FormFutura, Technical Data Sheet EasyFil PETp. 1
Precision and toleranceThis unique set of properties translates to a PET filament that enables you to 3D print accurate parts with improved strength and mechanical properties.FormFutura, Technical Data Sheet EasyFil PETp. 1
Moisture sensitivityNext to this, EasyFil PET has a higher melting point and lower moisture intake.FormFutura, Technical Data Sheet EasyFil PETp. 1

Chemicals and environment (1)

UV and outdoor: described in wordsGood UV resistance.UVFormFutura, Technical Data Sheet EasyFil PETp. 1

Spectrum ecoPET 9021Strength XY, MPa55Modulus XY, GPa3Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg115Nozzle, °C240–270Bed, °C≥ 50Chamber, °CnoneDrying, °C, h808 h

Spectrum ecoPET 9021Spectrum

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET ecoPET 90219 valuesUnless a row says otherwise: specimen not stateddry
Tensile modulus orientation not stated	3 GPap. 1: Tenisle modulus (dry, @1 mm/min)	ISO 527 As the sheet prints it: ISO 527; rate=1 mm/min tested at 23 °C	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	55 Mpap. 1: Tensile Strength*	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strain at strength orientation not stated	2,20%p. 1: Elongation @Fmax.*	ISO 527 As the sheet prints it: ISO 527; rate=50 mm/min tested at 23 °C	listed under other properties
Flexural modulus orientation not stated	3 Gpap. 1: Flexural modulus (dry, @2 mm/min)	ISO 178 As the sheet prints it: dry 2 mm/min ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	75 MPap. 1: Flexural Strength**	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural elongation at break orientation not stated	2,40%p. 1: Flexural elongation @Fmax.**	ISO 178 As the sheet prints it: ISO 178; rate=10 mm/min tested at 23 °C	listed under other properties
Charpy impact strength	28 kJ/m2p. 1: Impact strength, dry	ISO 179 As the sheet prints it: dry ISO 179 unnotched	not in the median: unnotched
Density	1.36 g/cm3p. 1: Density	ISO 1183moisture state not stated
Water absorption	0,3 %p. 1: Water absorption (23°C / 24h)	ISO 62 As the sheet prints it: 23°C / 24h ISO 62 tested at 23°Cmoisture state not stated

Print settings

Nozzle: 240–270 °Cown data sheet
Bed: at least 50 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 80 °C for 8 hown data sheet
Hardened nozzle: not neededown data sheet

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.

Its 3 print profiles, in the documents' words

Nozzle 240-270°C; Bed ≥ 50°CSpectrum, TECHNICAL DATA SHEET ecoPET 9021p. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: settings footnote
Nozzle 250-275 °C; Chamber recommended for larger printsSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 5: Nozzle temp. [°C]; p. 5: Closed chamber for printing; p. 5: Dry box recommended; p. 5: Ruby or hardened nozzle recommended; p. 5: Adhesive
Drying 80°C, 8h; NecessarySpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying

Price

115 CAD/kgits one regular price in the sample

1 listing

3D Printing Canada: 115 CAD/kgBlack - Spectrum ecoPET 9021 Filament - 1.75mm, 0.75kg (SKU 67bbc4c70b99c)in its price; seen 30 Sep 2026

Its 4 documents

What the maker says (7)

BenefitsUnlike the more widely used PETG in 3D printing, it is based on a non-glycol-modified variant of PET retaining more than 90% recycled content in its composition.Spectrum, TECHNICAL DATA SHEET ecoPET 9021p. 1
BenefitsecoPET 9021 is an eco-friendly and east to print filament.Spectrum, TECHNICAL DATA SHEET ecoPET 9021p. 1
Surface finishhigh surface quality after printingSpectrum, TECHNICAL DATA SHEET ecoPET 9021p. 1
Adhesion between layersperfect bonding of the layersSpectrum, TECHNICAL DATA SHEET ecoPET 9021p. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET ecoPET 9021p. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET ecoPET 9021p. 1
Benefits90% Recycled content, very good impact strength, rigidity increased by 50%, tensile strengthSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3

colorFabb PET Flex MaxStrength XY, MPa19.5Modulus XY, GPa0.442Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C60Chamber, °C—Drying, °C, h—

colorFabb PET Flex MaxcolorFabb

Modified: declared softer grade. Its values are kept out of the material's medians.

Sold as toughened or impact-modified: "While conventional rigid materials may crack or break under excessive deformation or sudden impact, PET FLEX MAX is designed to bend and absorb the applied energy." (colorFabb, PET FLEX MAX CLEAR, p. 1). The maker's statement, not a test result.

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet PET Flex Max5 valuesUnless a row says otherwise: printed specimen print settings The specimens have been printed in XY plane, using 0,2 mm layer height, 100% infill, 0,4 mm nozzle, 240 ˚C nozzle temperature and 60˚C bed temperature.
Tensile modulus XY	442 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A	not in the median: added filler or additive
Tensile strength (yield or break not stated) XY	19,5 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A	not in the median: added filler or additive
Elongation at break XY	418 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A	not in the median: added filler or additive
Flexural modulus XY	423 MPap. 1: Flexural Modulus Flexural, ISO 178	ISO 178	not in the median: added filler or additive
Glass transition temperature	67,6 °Cp. 1: Glass Transition Temp. DSC, ISO 11357	moulded bar (resin supplier's value), ISO 11357print settings not stated	not in the median: the resin supplier's value, not a printed part

Print settings

Nozzle: 210–260 °Cown data sheet
Bed: 60 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Its 3 print profiles, in the documents' words

Nozzle 210-260 °C; Bed 60 °CcolorFabb, Technical datasheet PET Flex Maxp. 2: Recommended printing settings; p. 2: Bed / surface modification
Nozzle 210-260°C; Bed 60°CcolorFabb, PET FLEX MAX CLEARp. 1: Advised 3D printing temperature; p. 1: Advised Heated bed
Nozzle 210-260°C; Bed 60°CcolorFabb, PET FLEX MAX NATURAL | Flexible Impact Resistant Filamentp. 1: Advised 3D printing temperature; p. 1: Advised Heated bed

Price

Not in the price sample.

Its 4 documents

What the maker says (24)

Printing adviceThis wide processing window makes the filament suitable for various printers, hotends and printing conditions.colorFabb, PET FLEX MAX CLEARp. 1
Good forHighly flexible filament for tough and impact-resistant partscolorFabb, PET FLEX MAX CLEARp. 1
BenefitsPET FLEX MAX Clear is an advanced technical filament that bridges the gap between conventional rigid materials and very soft flexible filaments.colorFabb, PET FLEX MAX CLEARp. 1
BenefitsThe result is a material with high flexibility, excellent impact absorption and exceptional resistance to breaking under bending .colorFabb, PET FLEX MAX CLEARp. 1
BenefitsWhile conventional rigid materials may crack or break under excessive deformation or sudden impact, PET FLEX MAX is designed to bend and absorb the applied energy.colorFabb, PET FLEX MAX CLEARp. 1
Good forThis makes it particularly suitable for demanding functional parts that must withstand bending, deformation and sudden impacts while retaining greater structural stability than very soft materials.colorFabb, PET FLEX MAX CLEARp. 1
BenefitsPET FLEX MAX can withstand significant deformation without brittle failure.colorFabb, PET FLEX MAX CLEARp. 1
BenefitsThe result is a tough and flexible technical material for applications where conventional rigid filaments may be too brittle and very soft filaments may provide insufficient stability.colorFabb, PET FLEX MAX CLEARp. 1
Good forThis balance makes PET FLEX MAX particularly suitable for protective parts, impact-absorbing components, flexible enclosures, bumpers, protective covers and functional components exposed to sudden loads or repeated deformation during use.colorFabb, PET FLEX MAX CLEARp. 1
BenefitsDespite its high flexibility, PET FLEX MAX is designed for easy and reliable 3D printing .colorFabb, PET FLEX MAX CLEARp. 1
Printing adviceThe material can be processed within an exceptionally wide temperature range of 200–300°C , including at relatively low printing temperatures.colorFabb, PET FLEX MAX CLEARp. 1
Warping and shrinkageCombined with its low tendency to warp , PET FLEX MAX makes demanding flexible and impact-resistant parts easier to produce.colorFabb, PET FLEX MAX CLEARp. 1
Good forPET FLEX MAX NATURAL is particularly suitable for functional applications where parts must bend under load, absorb sudden impacts and resist breakage .colorFabb, PET FLEX MAX CLEARp. 1
BenefitsRather than focusing solely on softness, PET FLEX MAX provides a balanced combination of flexibility and structural stability.colorFabb, PET FLEX MAX CLEARp. 1
Good forThis makes it suitable for protective enclosures and similar applications, as well as industrial components that are regularly bent, struck or deformed.colorFabb, PET FLEX MAX CLEARp. 1
Pitfalls and limitationsFor applications requiring greater rigidity, a more structurally rigid filament may be preferable.colorFabb, PET FLEX MAX CLEARp. 1
Good forParticularly suitable for: Impact-absorbing parts, protective components, flexible enclosures, bumpers, protective covers and functional parts exposed to bending or deformation.colorFabb, PET FLEX MAX CLEARp. 1
BenefitsPET FLEX MAX CLEAR is a highly flexible and impact-resistant technical filament.colorFabb, PET FLEX MAX CLEARp. 1
BenefitsIt combines structural strength with excellent flexibility and impact absorption, producing tough parts that can withstand significant deformation without breaking.colorFabb, PET FLEX MAX CLEARp. 1
Good forThanks to minimal warping, easy printability and a wide processing window of 200–300°C , PET FLEX MAX is ideal for demanding functional parts exposed to bending, impact and repeated deformation.colorFabb, PET FLEX MAX CLEARp. 1
BenefitsMaximum flexibilitycolorFabb, PET FLEX MAX CLEARp. 1
BenefitsHigh impact resistancecolorFabb, PET FLEX MAX CLEARp. 1
Printing adviceAdvised 3d print speed 150mm/s (12mm³/s)colorFabb, PET FLEX MAX CLEARp. 1
Printing adviceCooling fan 100%colorFabb, PET FLEX MAX CLEARp. 1

Not published by any product: tensile strength (Z).

Values are for the colour each sheet tested; pigment can change them.