Filament Atlas
Open in the selectorSelector

PA12-CF

15 products from 14 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

How the numbers are worked out

Polymaker FIBERON PA12 CF10Strength XY, MPa77.4Strength Z, MPa52.2Modulus XY, GPa3.31Charpy notched, kJ/m²9.9HDT 0.45, °C131HDT 1.8, °C105Price, CAD/kg—Nozzle, °C280–300Hardened nozzle neededBed, °C40–50Chamber, °CnoneDrying, °C, h10010 h

Polymaker FIBERON PA12 CF10Polymaker

Published values

PropertyAs publishedConditionsOn the Overview
Polymaker, FIBERON PA12 CF1023 values
Tensile modulus XY3311.2 ± 134.9 MPap. 1: Young’s modulus (X-Y)ISO 527, GB/T 1040
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Tensile modulus Z1806.6 ± 145.7 MPap. 1: Young’s modulus (Z)ISO 527, GB/T 1040
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Tensile strength (yield or break not stated) XY77.4 ± 1.1 MPap. 1: Tensile strength (X-Y)ISO 527, GB/T 1040
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Tensile strength (yield or break not stated) Z52.2 ± 0.8 MPap. 1: Tensile strength (Z)ISO 527, GB/T 1040
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Elongation at break XY4.2 ± 0.4 %p. 1: Elongation at break (X-Y)ISO 527, GB/T 1040
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Elongation at break Z5.0 ± 1.0 %p. 1: Elongation at break (Z)ISO 527, GB/T 1040dryannealed at 100 °C for 16 h (stated once on its page)
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Flexural modulus XY2886.5 ± 144.8 MPap. 1: Bending modulus (X-Y)ISO 178, GB/T 9341
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Flexural modulus Z1452.8 ± 96.5 MPap. 1: Bending modulus (Z)ISO 178, GB/T 9341
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Flexural strength XY112.4 ± 1.0 MPap. 1: Bending strength (X-Y)ISO 178, GB/T 9341
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Flexural strength Z69.8 ± 2.2 MPap. 1: Bending strength (Z)ISO 178, GB/T 9341
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Charpy impact strength XY9.9 ± 0.7 kJ/m2p. 1: Charpy impact strength (X-Y) notchedno standard stated
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
in the median
Charpy impact strength XY33.7 ± 1.4 kJ/m2p. 1: Charpy impact strength (X-Y)un-notched ISO 179, GB/T 1043ISO 179, GB/T 1043
dryDry
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
unnotched
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
not in the median: unnotched
Charpy impact strength Z27.6 ± 3.7 kJ/m2p. 1: Charpy impact strength (Z) un-notchedno standard stateddryannealed at 100 °C for 16 h (stated once on its page)unnotched
print settingsInfill 100%; Printing temperature 300 °C; Shell 2; Bed temperature 50 °C; Cooling fan OFF; Top & bottom layer 3
not in the median: unnotched
HDT at 0.45 MPa131 °Cp. 1: Heat deflection temp. ISO 75 0.45MPa
ISO 75As the sheet prints it: 0.45MPa ISO 75
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
in the median
HDT at 1.8 MPa105 °Cp. 1: Heat deflection temp. ISO 75 1.8MPa
ISO 75As the sheet prints it: 1.8MPa ISO 75
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
in the median
Glass transition temperature55 °Cp. 1: Glass transition temp. DSC, 10°C/minDSCin the median
Vicat softening temperature170.2 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633ISO 306, GB/T 1633
annealed at 100 °C for 16 hAll specimens were annealed at 100°C for 16h
Melting temperature171 °Cp. 1: Melting temperature DSC, 10°C/minDSC
Decomposition temperature445.2 °Cp. 1: Decomposition temp. TGA, 20°C/minTGA
Density1.06 g/cm3p. 1: Density ISO1183, GB/T1033ISO 1183, GB/T 1033
Melt mass-flow rate25.0 g/10minp. 1: Melt index 280°C, 2.16 kg
no standard namedAs the sheet prints it: 280°C 2.16 kg
tested at 280°C
Surface resistivity10^12 Ωtranscription correctedp. 1: Surface Resistivity (Ω) ANSI ESD S11.11 OL
no standard namedAs the sheet prints it: Ω ANSI ESD S11.11 OL
Fibre contentPA12-CF10 %p. 1: Fibre contentno standard stated

Print settings

Nozzle
280–300 °Cown data sheet
Bed
40–50 °Cown data sheet
Heated chamber
not requiredown data sheet
Drying
100 °C for 10 hown data sheet
Hardened nozzle
neededown data sheet
Annealing
100 °C for 16 hown data sheet

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Polymaker, FIBERON PA12 CF10 official maker product page; bed in Polymaker, FIBERON PA12 CF10 official maker product page.

Its 2 print profiles, in the documents' words

Price

Not in the price sample.

1 listing: 1 with no regular price per kilogram recorded
  • Voxel Factory: 198 per kg, sale pricePolymaker Fiberon PA12-CF10 1.75mm 500g (SKU PMK-FBR-PA12-CF10-500)not used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 3 documents

What the maker says (10)
  • Warping and shrinkageIn addition, the carbon fiber reinforcement and Warp-free™ technology enhance the size stability of the prints produced with this material.Polymaker, FIBERON PA12 CF10p. 1
  • Moisture sensitivityThanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials.Polymaker, FIBERON PA12 CF10p. 1
  • Moisture sensitivityFiberon™ PA12-CF10 is sensitive to moisture and should always be stored and used under dry conditions (relative humidity below 20%).Polymaker, FIBERON PA12 CF10p. 1
  • Nozzle wearNormally, the life of a brass nozzle would be approximately 9h.Polymaker, FIBERON PA12 CF10p. 1
  • Nozzle wearAbrasion of the brass nozzle happens frequently when printing Fiberon™ PA12-CF10.Polymaker, FIBERON PA12 CF10p. 1
  • Nozzle wearA wear-resistance nozzle, such as hardened steel and ruby nozzle, is highly recommended to be used with Fiberon™ PA12-CF10.Polymaker, FIBERON PA12 CF10p. 1
  • Supports and removalOtherwise, the support structure can be permanently bonded to the model.Polymaker, FIBERON PA12 CF10p. 1
  • Supports and removalIf Fiberon™ PA12-CF10 is used as the support material for itself, please remove the support structure before excessive moisture absorption.Polymaker, FIBERON PA12 CF10p. 1
  • Good forProfessional-Grade Mechanical Strength and Dimensional Stability Fiberon™ PA12-CF10 is a carbon fiber reinforced long-chain copolyamide (PA12) filament engineered for demanding industrial and engineering applications. With 10% carbon fiber content, it delivers outstanding mechanical strength, rigidity, and thermal resistance, making it ideal for parts that require durability, precision, and minimal warping.Polymaker, FIBERON PA12 CF10 official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 187
  • Moisture sensitivityMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.Polymaker, FIBERON PA12 CF10 official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 282
Chemicals and environment (1)
Polymaker PolyMide PA12 CFStrength XY, MPa43.5Strength Z, MPa—Modulus XY, GPa1.97Charpy notched, kJ/m²17.7HDT 0.45, °C131HDT 1.8, °C105Price, CAD/kg—Nozzle, °C260–300Hardened nozzle neededBed, °C25–50Chamber, °CnoneDrying, °C, h8012 h

Polymaker PolyMide PA12 CFPolymaker

Published values

PropertyAs publishedConditionsOn the Overview
Polymaker, PolyMide PA12 CF25 valuesUnless a row says otherwise: printed specimen
annealed at 80 °C for 24 hAll specimens were annealed at 80˚C for 24h and dried for 48h prior to testing
print settingsPrinting temperature 300 °C Bed temperature 50 °C Shell 2 Top & bottom layer 4 Infill 100% Environmental temperature 50 ˚C Cooling fan OFF The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purpose
Tensile modulus XY3304.39 ± 145 MPap. 4: Young’s modulus (X-Y)ISO 527, GB/T 1040
dryDry
not in the median: annealed; the as-printed value is in it
Tensile modulus XY3054 ± 149 MPap. 4: Young’s modulus (X-Y)ISO 527, GB/T 1040
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Tensile modulus Z1801.09 ± 80 MPap. 4: Young’s modulus (Z)ISO 527, GB/T 1040
dryDry
not in the median: annealed; the as-printed value is in it
Tensile modulus Z1520 ± 84 MPap. 4: Young’s modulus (Z)ISO 527, GB/T 1040
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Tensile strength (yield or break not stated) XY71.6 ± 1.7 MPap. 4: Tensile strength (X-Y)ISO 527, GB/T 1040
dryDry
not in the median: annealed; the as-printed value is in it
Tensile strength (yield or break not stated) XY73.4 ± 0.6 MPap. 4: Tensile strength (X-Y)ISO 527, GB/T 1040
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Tensile strength (yield or break not stated) Z43.3 ± 3.3 MPap. 4: Tensile strength (Z)ISO 527, GB/T 1040
dryDry
not in the median: annealed; the as-printed value is in it
Tensile strength (yield or break not stated) Z42.0 ± 1.5 MPap. 4: Tensile strength (Z)ISO 527, GB/T 1040
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Elongation at break XY3.57 ± 0.3 %p. 4: Elongation at break (X-Y)ISO 527, GB/T 1040
dryDry
in the median
Elongation at break XY6.06 ± 0.6 %p. 4: Elongation at break (X-Y)ISO 527, GB/T 1040
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Elongation at break Z3.29 ± 0.5 %p. 4: Elongation at break (Z)ISO 527, GB/T 1040
dryDry
in the median
Elongation at break Z3.51 ± 0.3 %p. 4: Elongation at break (Z)ISO 527, GB/T 1040
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Flexural modulus XY3535 ± 239 MPap. 4: Bending modulus (X-Y)ISO 178, GB/T 9341
dryDry
in the median
Flexural modulus XY3336 ± 292 MPap. 4: Bending modulus (X-Y)ISO 178, GB/T 9341
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Flexural strength XY109.9 ± 1.4 MPap. 4: Bending strength (X-Y)ISO 178, GB/T 9341
dryDry
not in the median: annealed; the as-printed value is in it
Flexural strength XY100.9 ± 3.5 MPap. 4: Bending strength (X-Y)ISO 178, GB/T 9341
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
Charpy impact strength XY12.5 ± 0.7 kJ/m2p. 4: Charpy impact strength (X-Y)ISO 179, GB/T 1043
dryDry
not in the median: annealed; the as-printed value is in it
Charpy impact strength XY9.2 ± 0.6 kJ/m2p. 4: Charpy impact strength (X-Y)ISO 179, GB/T 1043
after moisture conditioningConditioned: water immersion
not in the median: measured after moisture conditioning
HDT at 0.45 MPa131 °Cp. 3: Heat deflection temperature
ISO 75As the sheet prints it: ISO 75 0.45MPa
annealed at a temperature its sheet does not state for a time its sheet does not state		in the median
Glass transition temperature54 °Cp. 3: Glass transition temperature
DSCAs the sheet prints it: DSC, 10°C/min
treatment not stated		in the median
Melting temperature165 °Cp. 3: Melting temperature
DSCAs the sheet prints it: DSC, 10°C/min
treatment not stated
Crystallization temperature130 °Cp. 3: Crystallization temperature
DSCAs the sheet prints it: DSC, 10°C/min
treatment not stated
Density1.06 g/cm3p. 2: Densityspecimen not stated, ISO 1183, GB/T 1033treatment not stated
Water absorption~1.5 %p. 2: Estimated equilibrium water absorption (%)specimen not stated,
no standard namedAs the sheet prints it: Estimated equilibrium water absorption
treatment not stated
Melt mass-flow rate25 g/10minp. 2: Melt indexspecimen not stated,
no standard namedAs the sheet prints it: 2.16 kg
tested at 280°Ctreatment not statedprint settings not stated
Also named without a value: flexural modulus, flexural strength, charpy impact strength, vicat softening temperature, thermal conductivity.
Polymaker, PolyMide PA12-CF Product Information Sheet5 valuesUnless a row says otherwise: printed specimen (implied by the document)
as printedAs Printed
Tensile modulus orientation not stated1971.77 ± 135.0 MPap. 6: Young’s Modulus (MPa)no standard statedin the median
Tensile strength (yield or break not stated) orientation not stated43.55 ± 0.27 MPap. 6: Tensile Strength (MPa)no standard statedin the median
Flexural strength orientation not stated48.19 ± 3.69 MPap. 6: Bending Strength (MPa)no standard statedin the median
Charpy impact strength orientation not stated17.69 ± 1.14 kJ/m²p. 6: Notched Charpy Impact Strength (kJ/m²) (As Printed)no standard statedin the median
HDT at 1.8 MPa105 °Cp. 6: HDT @ 1.8 MPa (80 °C Annealed)
no standard namedAs the sheet prints it: HDT @ 1.8 MPa
annealed at 80 °C for a time its sheet does not state80 °C Annealed
in the median
Polymaker, PolyMide PA12-CF safety data sheet (EU)1 value
Fibre content10-30%p. 2: Chopped Carbon Fiberno standard stated

Print settings

Nozzle
260–300 °Cown data sheet
Bed
25–50 °Cown data sheet
Heated chamber
not requiredown data sheet
Drying
optional: 80 °C for 12 hown data sheet
Hardened nozzle
neededown data sheet
Annealing
80 °C for 24 h; temperature not stated; 80 °Cown data sheet

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): heated chamber in Polymaker, PolyMide PA12-CF Product Information Sheet.

Its 2 print profiles, in the documents' words
  • Nozzle 260 - 300 (℃); Bed 25 - 50 (˚C); Chamber Room temperaturePolymaker, PolyMide PA12 CFRecommended printing settings; p. 5: Based on 0.4 mm nozzle
  • Nozzle 260-300 ˚C; Bed 25-50 ˚C (Do NOT exceed 50˚C); Chamber 25-50 ˚C (Do NOT exceed 50˚C); Drying If the filament has absorbed moisture it can be dried at 80˚C for 12 hours in a convection oven.Polymaker, PolyMide PA12-CF Product Information Sheetp. 4: Nozzle Temperature:; p. 4: Bed Temperature:; p. 4: Chamber Temperature:; p. 4: Note: Settings are based on 0.4 mm nozzle; p. 4: Bed surface; p. 7: Dry box system; p. 7: Dry box system

Price

Not in the price sample.

Its 5 documents

What the maker says (9)
  • Good forCombined with its ease of print with Warp-Free™ technology, this product is ideal to create manufacturing tools.Polymaker, PolyMide PA12 CFp. 2
  • Moisture sensitivityThanks to the low moisture sensitivity of PA12, this product features outstanding mechanical and thermal properties even after the moisture conditioning process.Polymaker, PolyMide PA12 CFp. 2
  • Moisture sensitivityPolyMide™ PA12-CF absorbs moisture slowly over the time.Polymaker, PolyMide PA12 CFp. 2
  • Nozzle wearNormally, the life of a brass nozzle would be approximately 9h.Polymaker, PolyMide PA12 CFp. 5
  • Nozzle wearAbrasion of the brass nozzle happens frequently when printing PolyMide™ PA12-CF.Polymaker, PolyMide PA12 CFp. 5
  • Nozzle wearA wear-resistance nozzle, such as hardened steel and ruby nozzle, is highly recommended to be used with PolyMide™ PA12-CF.Polymaker, PolyMide PA12 CFp. 5
  • Supports and removalOtherwise the support structure can be permanently bonded to the model.Polymaker, PolyMide PA12 CFp. 5
  • Supports and removalIf PolyMide™ PA12-CF is used as the support material for itself, please remove the support structure before excessive moisture absorption.Polymaker, PolyMide PA12 CFp. 5
  • Pitfalls and limitationsThis Product Is Being Discontinued. Sale is Final And Not Eligible For Returns.Polymaker, PolyMide PA12 CF official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 85
Specimen preparation (1)
Chemicals and environment (7)
BigRep PA12 CFStrength XY, MPa52Strength Z, MPa—Modulus XY, GPa2.4Charpy notched, kJ/m²11HDT 0.45, °C48HDT 1.8, °C45Price, CAD/kg—Nozzle, °C260–300Bed, °C40–60Chamber, °C—Drying, °C, h806–8 h

BigRep PA12 CFBigRep

Only 2.85 mm filament was found; the H2C takes 1.75 mm.

Published values

PropertyAs publishedConditionsOn the Overview
BigRep, FILAMENT PA12 CF10 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated2400 MPap. 1: Tensile Modulus (ISO 527)ISO 527not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated52 MPap. 1: Tensile Strength (ISO 527)ISO 527not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated1950 MPap. 1: Flexural Modulus (ISO 178)ISO 178not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated70 MPap. 1: Flexural Strength (ISO 178)ISO 178not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength11 kJ/m²p. 1: Impact Strength, Notched (ISO 179)ISO 179not in the median: set apart (never used to pass), test bar not described as printed
HDT at 0.45 MPa48 °Cp. 1: HDT B - 0.45 MPa (ISO 75)
ISO 75As the sheet prints it: 0.45 MPa ISO 75
not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa45 °Cp. 1: HDT A - 1.8 MPa (ISO 75)
ISO 75As the sheet prints it: 1.8 MPa ISO 75
not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature55 °Cp. 1: Glass Transition Temperature (Tg) (DSC)
DSCAs the sheet prints it: Tg DSC
in the median
Melting temperature170 °Cp. 1: Melting Temperature (Tm) (DSC)
DSCAs the sheet prints it: Tm DSC
Density1.07 g/cm³p. 1: Density (ISO 1183)ISO 1183

Print settings

Nozzle
260–300 °Cown data sheet
Bed
40–60 °Cown data sheet
Heated chamber
not stated
Drying
80 °C for 6–8 hown data sheet
Hardened nozzle
not stated
Its print profile, in the documents' words
  • Nozzle 260 - 300 °C; Bed 40 - 60 °C; Drying 80 °C for 6 - 8 hoursBigRep, FILAMENT PA12 CFp. 1: Recommended printing settings; p. 1: Bed Temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (1)
  • Good forStrong, durable, and with a high strength-to-weight ratio, PA12 CF is a perfect choice for parts with daily production usage under long-term stress.BigRep, FILAMENT PA12 CFp. 1
Fiberlogy Nylon PA12+CF15Strength XY, MPa120Strength Z, MPa—Modulus XY, GPa7.3Charpy notched, kJ/m²15HDT 0.45, °C170HDT 1.8, °C150Price, CAD/kg—Nozzle, °C255–270Bed, °C90–110Chamber, °C—Drying, °C, h804 h

Fiberlogy Nylon PA12+CF15Fiberlogy

Published values

PropertyAs publishedConditionsOn the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF157 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15.Unless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated7300 MPap. 1: Tensile Modulus ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15ISO 527not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated120 MPap. 1: Tensile Strength @ Break ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15ISO 527not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated5 %p. 1: Elongation @ Break ISO 527 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15ISO 527not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength15 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2
ISO 179As the sheet prints it: 23°C ISO 179
tested at 23°C		not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength75 kJ/m2p. 1: Charpy Impact Strength (Unnotched) @ 23°C ISO 179 kJ/m2
ISO 179As the sheet prints it: 23°C ISO 179
tested at 23°C		not in the median: unnotched
HDT at 0.45 MPa170 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15
ISO 75As the sheet prints it: 0.45 MPa ISO 75
not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa150 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15
ISO 75As the sheet prints it: 1.8 MPa ISO 75
not in the median: set apart (never used to pass), test bar not described as printed
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF155 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15.
Flexural modulus orientation not stated7000 MPap. 1: Flexural Modulus ISO 178 MPaISO 178not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated15 kJ/m²p. 1: Izod Impact Strength (Notched) @ 23°CISO 180tested at 23 °Cnot in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature170 °Cp. 1: Vicat Softening Temperature ISO 306 °CISO 306
Melting temperature178 °Cp. 1: Melting Temperature Tm DSC °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15
DSCAs the sheet prints it: Tm DSC
Continuous service temperature100 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C
no standard namedAs the sheet prints it: UL 746
Fiberlogy, PA12+CF Nylon Filament4 valuesUnless a row says otherwise: specimen not stated
Charpy impact strength orientation not stated15 kJ/m²p. 1: Charpy impact strength (notched) @ 23°CISO 179tested at 23 °Cnot in the median: another value of this product is in it
Charpy impact strength orientation not stated75 kJ/m²p. 1: Charpy impact strength (uncharved) @ 23°CISO 179tested at 23 °Cunnotchednot in the median: unnotched
Density1.07 g/cm³p. 1: Densityno standard stated
Fibre content15% carbon fiber additivep. 1: Fibre contentno standard stated

Print settings

Nozzle
255–270 °Cown data sheet
Bed
90–110 °Cown data sheet
Heated chamber
not stated
Drying
80 °C for 4 hown data sheet
Hardened nozzle
not stated

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12+CF15, Fiberlogy, PA12+CF Nylon Filament.

Its 3 print profiles, in the documents' words

Price

Not in the price sample.

Its 4 documents

What the maker says (1)
  • Warping and shrinkageCompared to classic PA12 nylon, the carbon fiber version offers better resistance to high temperatures and less shrinkage during printing.Fiberlogy, PA12+CF Nylon Filamentp. 1
Raise3D Industrial PA12 CFStrength XY, MPa44Strength Z, MPa—Modulus XY, GPa1.92Charpy notched, kJ/m²18HDT 0.45, °C90HDT 1.8, °C—Price, CAD/kg—Nozzle, °CHardened nozzle neededBed, °C—Chamber, °CnoneDrying, °C, h8012 h

Raise3D Industrial PA12 CFRaise3D

Published values

PropertyAs publishedConditionsOn the Overview
Raise3D, Raise3D Industrial PA12 CF Technical Data Sheet18 valuesUnless a row says otherwise: printed bar (its stated orientation says so)
annealed at 80 °C for 24 hAll specimens were annealed at 80˚C for 24h and dried for 48h prior to testing
Tensile modulus XY3320 ± 145 MPap. 1: Young’s modulus (X-Y) ISO 527, GB/T 1040ISO 527, GB/T 1040
dryDried before testing (see preparation)
not in the median: annealed; the as-printed value is in it
Tensile modulus XY3040 ± 130 MPap. 2: Young’s modulus (X-Y) ISO 527, GB/T 1040ISO 527, GB/T 1040
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Tensile modulus Z1830 ± 80 MPap. 1: Young’s modulus (Z) /no standard stated
dryDried before testing (see preparation)
not in the median: annealed; the as-printed value is in it
Tensile modulus Z1530 ± 70 MPap. 2: Young’s modulus (Z) /no standard stated
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Tensile strength (yield or break not stated) XY72 ± 2 MPap. 1: Tensile strength (X-Y) ISO 527, GB/T 1040ISO 527, GB/T 1040
dryDried before testing (see preparation)
not in the median: annealed; the as-printed value is in it
Tensile strength (yield or break not stated) XY73 ± 1 MPap. 2: Tensile strength (X-Y) ISO 527, GB/T 1040ISO 527, GB/T 1040
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Tensile strength (yield or break not stated) Z43 ± 3 MPap. 1: Tensile strength (Z) /no standard stated
dryDried before testing (see preparation)
not in the median: annealed; the as-printed value is in it
Tensile strength (yield or break not stated) Z42 ± 2 MPap. 2: Tensile strength (Z) /no standard stated
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Elongation at break XY3.6 ± 0.3 %p. 1: Elongation at break (X-Y) ISO 527, GB/T 1040ISO 527, GB/T 1040
dryDried before testing (see preparation)
not in the median: annealed; the as-printed value is in it
Elongation at break XY6.1 ± 0.6 %p. 2: Elongation at break (X-Y) ISO 527, GB/T 1040ISO 527, GB/T 1040
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Elongation at break Z3.3 ± 0.5 %p. 1: Elongation at break (Z) /no standard stated
dryDried before testing (see preparation)
not in the median: annealed; the as-printed value is in it
Elongation at break Z3.5 ± 0.5 %p. 2: Elongation at break (Z) /no standard stated
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Flexural modulus XY3336 ± 292 MPap. 2: Bending modulus (X-Y) ISO 178, GB/T 9341ISO 178, GB/T 9341
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Flexural strength XY100 ± 4 MPap. 2: Bending strength (X-Y) ISO 178, GB/T 9341ISO 178, GB/T 9341
after moisture conditioningConditioned: immerged at ambient temperature for 3 days (medium not stated)
not in the median: measured after moisture conditioning
Charpy impact strength XY9.2 ± 0.6 kJ/m2p. 2: Charpy impact strength (X-Y) ISO 179, GB/T 1043ISO 179, GB/T 1043after moisture conditioningannealed at 80 °C for 24 h (stated once on its page)not in the median: measured after moisture conditioning
Density1.06 g/cm³p. 1: Density (g/cm³ at 21.5 °C)specimen not stated,
ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: ASTM D792 (ISO 1183, GB/T 1033)
tested at 21.5 °Ctreatment not stated
Moisture content0.6 %p. 1: Moisture content (%) Thermogravimetricspecimen not stated, no standard statedtreatment not stated
Melt mass-flow rate25 g/10 minp. 1: Melt index (g/10 min)specimen not stated,
no standard namedAs the sheet prints it: 2.16 kg
tested at 280 °Ctreatment not stated
Raise3D, Raise3D Fiber Reinforced Technology white paper v2.015 valuesUnless a row says otherwise: printed specimen (implied by the document)
Tensile modulus orientation not stated1918 MPap. 11: Young’s Modulus (MPa) (As Printed)no standard statedin the median
Tensile modulus orientation not stated3304 MPap. 11: Young’s Modulus (MPa) (100℃ Annealed)no standard stated
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it
Tensile strength (yield or break not stated) orientation not stated44 MPap. 11: Tensile Strength (MPa) (As Printed)no standard statedin the median
Tensile strength (yield or break not stated) orientation not stated72 MPap. 11: Tensile Strength (MPa) (100℃ Annealed)no standard stated
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it
Elongation at break orientation not stated34 %p. 11: Elongation at Break (%) (As Printed)no standard statedin the median
Elongation at break orientation not stated4 %p. 11: Elongation at Break (%) (100℃ Annealed)no standard stated
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it
Flexural modulus orientation not stated2012 MPap. 11: Bending Modulus (MPa) (As Printed)no standard statedin the median
Flexural modulus orientation not stated3535 MPap. 11: Bending Modulus (MPa) (100℃ Annealed)no standard stated
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it
Flexural strength orientation not stated48 MPap. 11: Bending Strength (MPa) (As Printed)no standard statedin the median
Flexural strength orientation not stated110 MPap. 11: Bending Strength (MPa) (100℃ Annealed)no standard stated
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it
Charpy impact strength orientation not stated18 KJ/m²p. 11: Notched Charpy Impact (KJ/m²) (As Printed)no standard statedin the median
Charpy impact strength orientation not stated13 KJ/m²p. 11: Notched Charpy Impact (KJ/m²) (100℃ Annealed)no standard stated
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it
HDT at 0.45 MPa131℃p. 11: HDT @ 0.45 MPa
no standard namedAs the sheet prints it: 0.45 MPa
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it
HDT at 0.45 MPa90℃p. 11: HDT @ 0.45 MPa (As Printed)
no standard namedAs the sheet prints it: 0.45 MPa
in the median
HDT at 1.8 MPa105℃p. 11: HDT @ 1.8 MPa (100℃ Annealed)
no standard namedAs the sheet prints it: 1.8 MPa
annealed at 100 °C for a time its sheet does not state100℃ Annealed
not in the median: annealed; the as-printed value is in it

Print settings

Nozzle
not stated
Bed
not stated
Heated chamber
not requiredown data sheet
Drying
80 °C for 12 hown data sheet
Hardened nozzle
neededown data sheet
Annealing
80 °C for 24 h; 100 °Cown data sheet
Its 2 print profiles, in the documents' words

Price

Not in the price sample.

Its 3 documents

What the maker says (11)
Chemicals and environment (1)
SUNLU PA12-CFStrength XY, MPa86Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²11.3IzodHDT 0.45, °C175HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C60–70Chamber, °CnoneDrying, °C, h80–110

SUNLU PA12-CFSUNLU

Published values

PropertyAs publishedConditionsOn the Overview
SUNLU, PA12-CF12 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO PA12-CF.
Tensile strength (yield or break not stated) XY100 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa
ISO 527As the sheet prints it: 50mm/min ISO527/2
not in the median: another value of this product is in it
Elongation at break XY12 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min %
ISO 527As the sheet prints it: 50mm/min ISO527/2
not in the median: another value of this product is in it
Flexural modulus XY5996 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa
ISO 178As the sheet prints it: 2mm/min ISO178
not in the median: another value of this product is in it
Flexural strength XY163 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa
ISO 178As the sheet prints it: 2mm/min ISO178
not in the median: another value of this product is in it
Izod impact strength XY13 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2
ISO 180As the sheet prints it: 23℃ ISO180
tested at 23°C		not in the median: another value of this product is in it
Izod impact strength ZX10 KJ/m2p. 1: IZOD Impact Notched (Z-X) ISO180 23℃ KJ/m2
ISO 180As the sheet prints it: Z-X 23℃ ISO180
tested at 23°C		not in the median: measured on a bar in another orientation
HDT at 0.45 MPa176 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃
ISO 75As the sheet prints it: 0.45MPa ISO75
not in the median: another value of this product is in it
Melting temperature190 ℃p. 1: Melting Point ISO11357-3 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO PA12-CF
ISO 11357As the sheet prints it: ISO11357-3
Decomposition temperature330 ℃p. 1: @5%Decomposition Temp. ISO11358 20℃/min ℃ISO 11358
Density1.2 g/cm3p. 1: Density ISO1183 23℃ g/cm3
ISO 1183As the sheet prints it: 23℃ ISO1183
tested at 23°C
Melt mass-flow rate15 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min
ISO 1133As the sheet prints it: 190℃/2.16kg ISO1133
tested at 190°C
Fibre content20% carbon fiberp. 1: Fibre contentno standard stated
SUNLU, TECHNICAL DATA SHEET ISO PA12-CF11 valuesThe same values also in SUNLU, PA12-CF.Unless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY86 ± 6 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa
ISO 527As the sheet prints it: 50 mm/min ISO 527/2
print settingsPrinting speed 45 mm/s; Printing temperature 290 °C; Infill: 100%; 90° raster orientation
in the median
Elongation at break XY13.7 ± 2.5 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min %
ISO 527As the sheet prints it: 50 mm/min ISO 527/2
print settingsPrinting speed 45 mm/s; Printing temperature 290 °C; Infill: 100%; 90° raster orientation
in the median
Flexural modulus XY5800 ± 300 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa
ISO 178As the sheet prints it: 2 mm/min ISO 178
print settingsPrinting speed 45 mm/s; Printing temperature 290 °C; Infill: 100%; 90° raster orientation
in the median
Flexural strength XY160 ± 30 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa
ISO 178As the sheet prints it: 2 mm/min ISO 178
print settingsPrinting speed 45 mm/s; Printing temperature 290 °C; Infill: 100%; 90° raster orientation
in the median
Izod impact strength XY11.3 ± 2.5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen
ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180
tested at 23°C
print settingsPrinting speed 45 mm/s; Printing temperature 290 °C; Infill: 100%; 90° raster orientation
in the median
Izod impact strength ZX4.8 ± 1.5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen
ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180
tested at 23°C
print settingsPrinting speed 45 mm/s; Printing temperature 290 °C; Infill: 100%; 90° raster orientation
not in the median: unnotched
Hardness82 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD
ISO 868As the sheet prints it: 23℃ HA/HD ISO 868
tested at 23°C		listed under other properties
HDT XY, at 0.45 MPa175 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃
ISO 75As the sheet prints it: 0.45 MPa ISO 75
in the median
Glass transition temperature99 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, PA12-CF
ISO 11357As the sheet prints it: ISO 11357-2
in the median
Density1.08 g/cm3p. 1: Density ISO 1183 23℃ g/cm3specimen not stated,
ISO 1183As the sheet prints it: 23℃ ISO 1183
tested at 23°C
Melt mass-flow rate14.4 ± 3 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 250℃/2.16 kg g/10 min
ISO 1133As the sheet prints it: 250℃/2.16 kg ISO 1133
tested at 250°C

Print settings

Nozzle
260–280 °Cown data sheet
Bed
60–70 °Cown data sheet
Heated chamber
not requiredown data sheet
Drying
80–110 °Cown data sheet
Hardened nozzle
not stated
Its 2 print profiles, in the documents' words
  • Nozzle 260-280; Bed 60-70℃; Chamber Room Temperature; Drying 80-110℃SUNLU, TECHNICAL DATA SHEET ISO PA12-CFp. 2: Recommended printing settings; p. 2: Nozzle Temp.
  • Nozzle 260-280; Bed 60-70℃; Chamber 常温; Drying 80-110℃SUNLU, PA12-CFp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Material

Price

Not in the price sample.

Its 3 documents

What the maker says (8)
3DXTECH CarbonX CF PA12Strength XY, MPa72Strength Z, MPa—Modulus XY, GPa8Charpy notched, kJ/m²—HDT 0.45, °C150HDT 1.8, °C—Price, CAD/kg300Nozzle, °C265–285Bed, °C90–110Chamber, °C—Drying, °C, h904 h

3DXTECH CarbonX CF PA123DXTECH

Published values

PropertyAs publishedConditionsOn the Overview
3DXTECH, CarbonX™ Carbon Fiber Nylon 12 (PA12) 3D Filament8 valuesUnless a row says otherwise: printed specimen
print settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 285°C Bed Temp: 110°C Specimen Orientation: XY Flat
Tensile modulus XY8000 MPap. 1: Tensile ModulusISO 527in the median
Tensile break strength XY72 MPap. 1: Tensile Strength, BreakISO 527in the median
Elongation at break XY2.1 %p. 1: Tensile Elongation, BreakISO 527in the median
Flexural modulus XY7900 MPap. 1: Flexural ModulusISO 178in the median
Flexural strength XY90 MPap. 1: Flexural StrengthISO 178in the median
HDT at 0.45 MPa150 °Cp. 1: Deflection Temperature at 0.45
ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi)
in the median
Glass transition temperature158 °Cphysically implausiblep. 1: Glass Transition TemperatureDSCnot in the median: physically implausible as published
Density1.16 g/ccp. 1: DensityISO 1183
3DXTECH, CarbonX CF PA12 safety data sheet1 value
Fibre content<20 %p. 1: Carbon Fiberno standard stated

Print settings

Nozzle
265–285 °Cown data sheet
Bed
90–110 °Cown data sheet
Heated chamber
not stated
Drying
90 °C for 4 hown data sheet
Hardened nozzle
not stated
Its 4 print profiles, in the documents' words

Price

300 CAD/kgits one regular price in the sample

1 listing
  • DigitMakers: 300 CAD/kgCARBONX™ Carbon Nylon PA 12+CF 1.75mm 500g Black (SKU 3DXTECH-FL-NYL-12-CF-1.75-500G-BLK)in its price; seen 30 Sep 2026

Its 6 documents

What the maker says (11)
Spectrum pa12 cf15Strength XY, MPa125Strength Z, MPa—Modulus XY, GPa8Charpy notched, kJ/m²15HDT 0.45, °C170HDT 1.8, °C150Price, CAD/kg—Nozzle, °C255–290Hardened nozzle neededBed, °C≥ 80Chamber, °C—Drying, °C, h80≥ 6 h

Spectrum pa12 cf15Spectrum

Published values

PropertyAs publishedConditionsOn the Overview
Spectrum, TECHNICAL DATA SHEET PA12 CF156 valuesThe same values also in Spectrum, pa12 cf15 and Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29.Unless a row says otherwise: printed specimen (implied by the document)
Tensile modulus orientation not stated8000 MPap. 1: Tensile Modulusalso in Spectrum, pa12 cf15
ISO 527As the sheet prints it: ISO 527-1/2
in the median
Tensile break strength orientation not stated125 MPap. 1: Tensile Stress at Breakalso in Spectrum, pa12 cf15
ISO 527As the sheet prints it: ISO 527-1/2
in the median
Elongation at break orientation not stated5 %p. 1: Tensile Strain at Breakalso in Spectrum, pa12 cf15
ISO 527As the sheet prints it: ISO 527-1/2
in the median
Charpy impact strength15 kJ/m2p. 1: Charpy Notched Impact Strengthalso in Spectrum, pa12 cf15
ISO 179As the sheet prints it: ISO 179/1eU
in the median
HDT at 0.45 MPa170 °Cp. 1: Temperature of deflection under load 0.45 MPaalso in Spectrum, pa12 cf15also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29
ISO 75As the sheet prints it: 0.45 MPa ISO 75-1/2
in the median
HDT at 1.8 MPa150 °Cp. 1: Temperature of deflection under load 1.8 MPaalso in Spectrum, pa12 cf15
ISO 75As the sheet prints it: 1.8 MPa ISO 75-1/2
in the median
Spectrum, pa12 cf154 valuesThe same values also in Spectrum, TECHNICAL DATA SHEET PA12 CF15.Unless a row says otherwise: specimen not stated
Charpy impact strength75 kJ/m2p. 1: Charpy Impact Strengthalso in Spectrum, TECHNICAL DATA SHEET PA12 CF15
ISO 179As the sheet prints it: ISO 179/1eU
unnotched		not in the median: unnotched
Density1.07 g/cm3p. 1: Specific Gravityalso in Spectrum, TECHNICAL DATA SHEET PA12 CF15ISO 1183
Melt mass-flow rate3 g/10min g/10 minp. 1: MFR (210°C, 2.16kg)also in Spectrum, TECHNICAL DATA SHEET PA12 CF15
ISO 1183As the sheet prints it: 210 °C, 2.16 kg (the sheet cites ISO 1183)
tested at 210°C
Fibre content15% carbon fibersp. 1: Fibre contentno standard stated

Print settings

Nozzle
255–290 °Cown data sheet
Bed
at least 80 °Cown data sheet
Heated chamber
not stated
Drying
optional: 80 °C for ≥ 6 hown data sheet
Hardened nozzle
neededown data sheet
Its 3 print profiles, in the documents' words

Price

Not in the price sample.

Its 4 documents

What the maker says (8)
Eryone PA12-CFStrength XY, MPa58Strength Z, MPa14Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–290Bed, °C80–100Chamber, °C—Drying, °C, h80–8512 h

Eryone PA12-CFEryone

Published values

PropertyAs publishedConditionsOn the Overview
Eryone, Technical Data Sheet (TDS) PA12-CF12 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY495-592 MPaphysically implausiblep. 2: Tensile Modulus X-Y 5mm/min D3638 MPa
ASTM D3638As the sheet prints it: 5mm/min D3638
not in the median: physically implausible as published
Tensile strength (yield or break not stated) XY58-63 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.2 MPa
GB/T 1040.2As the sheet prints it: 50mm/min GB/T 1040.2
print settingsprinting temperature=280 ° C, printing speed=60mm/s, base plate 100 ° C, filling=100%, nozzle diameter=0.4mm
in the median
Tensile strength (yield or break not stated) Z (X-Z)14-16 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1040.2 MPa
GB/T 1040.2As the sheet prints it: 50mm/min GB/T 1040.2
print settingsprinting temperature=280 ° C, printing speed=60mm/s, base plate 100 ° C, filling=100%, nozzle diameter=0.4mm
in the median
Elongation at break XY14.8-17.1 %p. 2: Elongation X-Y 5mm/min D3638 %
ASTM D3638As the sheet prints it: 5mm/min D3638
print settingsprinting temperature=280 ° C, printing speed=60mm/s, base plate 100 ° C, filling=100%, nozzle diameter=0.4mm
in the median
Flexural modulus XY3193-3484 MPa
ASTM D790As the sheet prints it: 2mm/min D790
print settingsprinting temperature=280 ° C, printing speed=60mm/s, base plate 100 ° C, filling=100%, nozzle diameter=0.4mm
in the median
Flexural strength XY96-102 MPa
ASTM D790As the sheet prints it: 2mm/min D790
print settingsprinting temperature=280 ° C, printing speed=60mm/s, base plate 100 ° C, filling=100%, nozzle diameter=0.4mm
in the median
Charpy impact strength orientation not stated16.4-19.2 kJ/m2p. 2: Charpy Impact strenght
GB/T 1843As the sheet prints it: GB/T 1843; energy=2.75J
not in the median: notch not stated
Impact strength, test unclear16.4-19.2 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2
GB/T 1843As the sheet prints it: 2.75J GB/T 1843
Which test: probably Izod
print settingsprinting temperature=280 ° C, printing speed=60mm/s, base plate 100 ° C, filling=100%, nozzle diameter=0.4mm
listed under other properties
HDT at 0.45 MPa185 ℃physically implausiblep. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃specimen not stated,
ASTM D648As the sheet prints it: 0.45MPa ASTM D648
not in the median: physically implausible as published
Density1.06 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³specimen not stated,
ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033
tested at 21.5°C
Melt mass-flow rate13.5-16.4 g/10minp. 1: Melt Index(g/10 min) 210 ° C, 2.16kg. D1238 g/10minspecimen not stated,
ASTM D1238As the sheet prints it: g/10 min 210 ° C 2.16kg. D1238
tested at 210°C
Fibre content20%p. 1: Fibre contentspecimen not stated, no standard stated

Print settings

Nozzle
260–290 °Cown data sheet
Bed
80–100 °Cown data sheet
Heated chamber
not stated
Drying
80–85 °C for 12 hown data sheet
Hardened nozzle
not stated
Its print profile, in the documents' words

Price

Not in the price sample.

Its 2 documents

What the maker says (3)
SIDDAMENT PA12-CFStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C90HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C60–90Chamber, °C25–50Drying, °C, h80≥ 12 h

SIDDAMENT PA12-CFSIDDAMENT

Published values

PropertyAs publishedConditionsOn the Overview
SIDDAMENT, Technical Data Sheet PA12-CF Filament13 values
Tensile strength (yield or break not stated) XY50-55 Mpap. 1: Tensile strength ISO 527 MpaISO 527
print settingsTest Sample Printing Conditions: 3D Printer Guider IIS (Flashforge) Nozzle Diameter 0.6mm Nozzle Temperature 275 °C Printing Speed 50mm/s Layer 1.8mm Infill 100% Standard Printed Sample See blew attachment
in the median
Elongation at break XY3.5-4.5 %p. 1: Elongation at break ISO 527 %ISO 527
print settingsTest Sample Printing Conditions: 3D Printer Guider IIS (Flashforge) Nozzle Diameter 0.6mm Nozzle Temperature 275 °C Printing Speed 50mm/s Layer 1.8mm Infill 100% Standard Printed Sample See blew attachment
in the median
Flexural modulus XY1300-1500 Mpap. 1: Flexural Modulus ISO 527 MpaISO 527
print settingsTest Sample Printing Conditions: 3D Printer Guider IIS (Flashforge) Nozzle Diameter 0.6mm Nozzle Temperature 275 °C Printing Speed 50mm/s Layer 1.8mm Infill 100% Standard Printed Sample See blew attachment
in the median
Flexural strength XY90-96 Mpap. 1: Flexural Strength ISO178 MpaISO 178
print settingsTest Sample Printing Conditions: 3D Printer Guider IIS (Flashforge) Nozzle Diameter 0.6mm Nozzle Temperature 275 °C Printing Speed 50mm/s Layer 1.8mm Infill 100% Standard Printed Sample See blew attachment
in the median
Izod impact strength3.5-5 KJ/m2p. 1: Impact Strength ISO180 KJ/m2ISO 180
print settingsTest Sample Printing Conditions: 3D Printer Guider IIS (Flashforge) Nozzle Diameter 0.6mm Nozzle Temperature 275 °C Printing Speed 50mm/s Layer 1.8mm Infill 100% Standard Printed Sample See blew attachment
not in the median: notch not stated
Izod impact strength orientation not stated3.5~5 KJ/m²p. 1: Impact StrengthISO 180
print settings3D Printer Guider IIS (Flashforge); Nozzle Diameter 0.6mm; Nozzle Temperature 275 °C; Printing Speed 50mm/s; Layer 1.8mm; Infill 100%
not in the median: notch not stated
HDT at 0.45 MPa90 ℃p. 1: HDT@ 0.455 MPa(66 psi) ISO75 ℃
ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO75
print settingsTest Sample Printing Conditions: 3D Printer Guider IIS (Flashforge) Nozzle Diameter 0.6mm Nozzle Temperature 275 °C Printing Speed 50mm/s Layer 1.8mm Infill 100% Standard Printed Sample See blew attachment
in the median
Continuous service temperature120 ℃p. 1: Continuous Use Temperature IEC 60216 ℃IEC 60216
Density1.23-1.26 g/cm3p. 1: Density ISO 1183 g/cm3ISO 1183
Water absorption0.3 %p. 1: Moisture Absorption(23℃/24h) ISO 62 %
ISO 62As the sheet prints it: 23℃/24h ISO 62
tested at 23°C
Melt mass-flow rate3-6 g/10minp. 1: MFR(250℃/2.16Kg) ISO 1133 g/10min
ISO 1133As the sheet prints it: 250℃/2.16Kg ISO 1133
tested at 250°C
Surface resistivity10² Ωp. 2: Surface Resistance IEC 60093 ΩIEC 60093
Fibre content15% carbon fiberp. 1: Fibre contentno standard stated

Print settings

Nozzle
260–280 °Cown data sheet
Bed
60–90 °Cown data sheet
Heated chamber
25–50 °Cown data sheet
Drying
80 °C for ≥ 12 hown data sheet
Hardened nozzle
not stated
Its print profile, in the documents' words
  • Nozzle 260~280℃(270℃ recommended); Bed 60~90℃(80℃ recommended); Chamber Room temperature to 50℃; Drying It is recommended to dry the filament in a dryer at 80°C for at least 12 hoursSIDDAMENT, Technical Data Sheet PA12-CF Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Printing Environmental Temperature; p. 3: Drying note

Price

Not in the price sample.

Its 2 documents

What the maker says (6)
MatterHackers Carbon Fiber NylonStrength XY, MPa66.4Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C167HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C70Chamber, °C—Drying, °C, h824–6 h

MatterHackers Carbon Fiber NylonMatterHackers

Published values

PropertyAs publishedConditionsOn the Overview
MatterHackers, TECHNICAL DATA SHEET - Carbon Fiber Nylon7 valuesUnless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated9,625 psip. 1: Tensile Strength at YieldASTM D638not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated8.1 %p. 1: Tensile ElongationASTM D638not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated385,000 psip. 1: Flexural ModulusASTM D790not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated12,400 psip. 1: Flexural Peak Stress (psi)ASTM D790not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated100 J/mp. 1: Notched Izod Impact (Jm-1)ASTM D256not in the median: in J/m
HDT at 0.45 MPa167 °Cp. 1: Heat Deflection
ASTM D648As the sheet prints it: 66 psi ASTM D648
not in the median: set apart (never used to pass), test bar not described as printed
Density1.01 g/cm³p. 1: Density (gcm-3)ASTM D792
MatterHackers, PRO Series PA CF (Carbon Fiber Nylon) Filament - 1.75mm (0.5kg) | MatterHackers1 value
Fibre content20%p. 1: Carbon Fillno standard stated

Print settings

Nozzle
240–260 °Cown data sheet
Bed
70 °Cown data sheet
Heated chamber
not stated
Drying
82 °C for 4–6 hown data sheet
Hardened nozzle
not stated

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in MatterHackers, PRO Series PA CF (Carbon Fiber Nylon) Filament - 1.75mm (0.5kg) | MatterHackers; bed in MatterHackers, PRO Series PA CF (Carbon Fiber Nylon) Filament - 1.75mm (0.5kg) | MatterHackers.

Its 2 print profiles, in the documents' words

Price

Not in the price sample.

Its 3 documents

Fillamentum Nylon CF15 CarbonStrength XY, MPa54.5Strength Z, MPa—Modulus XY, GPa0.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C235–260Hardened nozzle neededBed, °C80–105Chamber, °C—Drying, °C, h80≥ 4 h

Fillamentum Nylon CF15 CarbonFillamentum

Published values

PropertyAs publishedConditionsOn the Overview
Fillamentum, Nylon CF15 Carbon8 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated500 MPap. 1: Tensile modulusISO 527not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated54,5 MPap. 1: Tensile strengthISO 527not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated103 %p. 1: Elongation at breakISO 527not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength86,2 kJ/m2p. 1: Charpy impact resistanceISO 179unnotchednot in the median: unnotched
Hardness75 Shore Dp. 1: HardnessISO 7619in the median
Melting temperature160 °Cp. 1: Melting temperatureno standard stated
Density1,08 g/cm3p. 1: Material densityISO 1183
Melt mass-flow rate9,92 g/10 minp. 1: Melt flow indexISO 1133
Fillamentum, Nylon CF15 Carbon | Fillamentum2 valuesUnless a row says otherwise: specimen not stated
Impact strength, test unclear orientation not stated86.2 kJ/m2 (unnotched) *p. 1: Impact resistance (unnotched; 86.2 kJ/m2 (unnotched) *)no standard statedWhich test: probably Charpylisted under other properties
Fibre content15 % of milled carbon fibersp. 1: Fibre contentno standard stated

Print settings

Nozzle
235–260 °Cown data sheet
Bed
80–105 °Cown data sheet
Heated chamber
not stated
Drying
80 °C for ≥ 4 hown data sheet
Hardened nozzle
neededown data sheet
Its 3 print profiles, in the documents' words

Price

Not in the price sample.

Its 4 documents

What the maker says (12)
Fabru Polyamid 12 carbon fiber 15% (PA12 CF15)Strength XY, MPa110Strength Z, MPa—Modulus XY, GPa9.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C160Price, CAD/kg—Nozzle, °C255–275Bed, °C100–120Chamber, °C—Drying, °C, h8016 h

Fabru Polyamid 12 carbon fiber 15% (PA12 CF15)Fabru

Published values

PropertyAs publishedConditionsOn the Overview
Fabru, Polyamid 12 Carbonfaser 15% (PA12 CF15)6 values
Tensile modulus orientation not stated9500 MPap. 1: Zug-E-Modul (ISO 527-1,2)
ISO 527As the sheet prints it: ISO 527-1,2
not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated110 MPap. 1: Streckspannung (ISO 527-1,2)
ISO 527As the sheet prints it: ISO 527-1,2
not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated4.5 %p. 1: Reissdehnung (ISO 527-1,2)
ISO 527As the sheet prints it: ISO 527-1,2
not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated4.5 %p. 1: Streckdehnung (ISO 527-1,2)
ISO 527As the sheet prints it: ISO 527-1,2
listed under other properties
Density1.07 g/cm3p. 1: Dichte (ISO 1183)ISO 1183
Mould shrinkage orientation not stated0.2-0.5 %p. 1: Schwindung (ISO 294-4)
ISO 294As the sheet prints it: ISO 294-4
Fabru, Polyamid 12 carbon fiber 15% (PA12 CF15)2 values
HDT at 1.8 MPa160 °Cp. 1: Heat deflection temperature 1.8 MPa (ISO 75-1,2)
ISO 75As the sheet prints it: ISO 75-1,2; 1.8 MPa
not in the median: set apart (never used to pass), test bar not described as printed
Fibre content15% carbon fiber contentp. 1: Fibre contentno standard stated

Print settings

Nozzle
255–275 °Cown data sheet
Bed
100–120 °Cown data sheet
Heated chamber
not stated
Drying
80 °C for 16 hown data sheet
Hardened nozzle
not stated
Its 3 print profiles, in the documents' words

Price

Not in the price sample.

Its 4 documents

What the maker says (18)
iSANMATE PA12CFStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—

iSANMATE PA12CFiSANMATE

Published values

PropertyAs publishedConditionsOn the Overview
iSANMATE, PA12CF Filament Technical Data Sheet18 valuesUnless a row says otherwise:
dryDry
Tensile modulus orientation not stated7.5 GPap. 1: Modulus of Elasticity Dry , @1 mm/min ISO 527 MPTS ISO 3167 A GPa
ISO 527, ISO 3167As the sheet prints it: 1 mm/min MPTS A ISO 527 ISO 3167
not in the median: measured on a moulded bar
Tensile strength (yield or break not stated) orientation not stated110 MPap. 1: Tensile Strength Dry, @50 mm/min ISO 527 MPTS ISO 3167 A MPa
ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167
not in the median: measured on a moulded bar
Elongation at break orientation not stated5.5 %p. 1: Elongation Dry, @50 mm/min ISO 527 MPTS ISO 3167 A %
ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167
not in the median: measured on a moulded bar
Flexural modulus XY4.0 GPap. 1: Flexural Modulus [X-Y] Dry ISO 178 MPTS ISO 3167 A GPa
ISO 178, ISO 3167As the sheet prints it: [X-Y] Dry MPTS A ISO 178 ISO 3167
in the median
Flexural modulus Z1.7 GPap. 1: Flexural Modulus [Z] Dry ISO 178 MPTS ISO 3167 A GPa
ISO 178, ISO 3167As the sheet prints it: [Z] Dry MPTS A ISO 178 ISO 3167
in the median
Flexural modulus orientation not stated6.5 GPap. 1: Flexural Modulus Dry , @2 mm/min ISO 178 MPTS ISO 3167 A GPa
ISO 178, ISO 3167As the sheet prints it: 2 mm/min MPTS A ISO 178 ISO 3167
not in the median: measured on a moulded bar
Flexural strength XY140 MPap. 1: Flexural Strength [X-Y] Dry ISO 178 MPTS ISO 3167 A MPa
ISO 178, ISO 3167As the sheet prints it: [X-Y] Dry MPTS A ISO 178 ISO 3167
in the median
Flexural strength Z75 MPap. 1: Flexural Strength [Z] Dry ISO 178 MPTS ISO 3167 A MPa
ISO 178, ISO 3167As the sheet prints it: [Z] Dry MPTS A ISO 178 ISO 3167
in the median
Flexural strength orientation not stated170 MPap. 1: Flexural Strength Dry , @10 mm/min ISO 178 MPTS ISO 3167 A MPa
ISO 178, ISO 3167As the sheet prints it: 10 mm/min MPTS A ISO 178 ISO 3167
not in the median: measured on a moulded bar
Charpy impact strength XY55 kJ/m2p. 1: Charpy Impact Strength [X-Y] Dry ISO 179 1eU MPTS ISO 3167 A kJ/m2
ISO 179, ISO 3167As the sheet prints it: 1eU MPTS A ISO 179 ISO 3167
unnotched		not in the median: unnotched
Charpy impact strength Z14 kJ/m2p. 1: Charpy Impact Strength [Z] Dry ISO 179 1eU MPTS ISO 3167 A kJ/m2
ISO 179, ISO 3167As the sheet prints it: 1eU MPTS A ISO 179 ISO 3167
unnotched		not in the median: unnotched
Charpy impact strength60 kJ/m2p. 1: Charpy Impact Strength Dry ISO 179 1eU MPTS ISO 3167 A kJ/m2
ISO 179, ISO 3167As the sheet prints it: 1eU MPTS A ISO 179 ISO 3167
unnotched		not in the median: measured on a moulded bar
Charpy impact strength10 kJ/m2p. 1: Charpy Impact Strength notched Dry ISO 179 1eA MPTS ISO 3167 A kJ/m2
ISO 179, ISO 3167As the sheet prints it: 1eA MPTS A ISO 179 ISO 3167
not in the median: measured on a moulded bar
HDT at 1.8 MPa195 °Cp. 1: Heat Distortion Temp. HDT A ISO 75 MPTS ISO 3167 A °C
ISO 75, ISO 3167As the sheet prints it: HDT A ISO 75 ISO 3167
moisture state not stated		not in the median: measured on a moulded bar
Continuous service temperature110 °Cp. 1: Continuous Service Temp.
ISO 3167As the sheet prints it: UL 746B; time=20.000 h; specimen=MPTS ISO 3167 A
moisture state not stated
Density1,13 g/cm3p. 1: Specific Gravity ISO 1183 MPTS ISO 3167 A g/cm3ISO 1183, ISO 3167moisture state not stated
Water absorption0.1 %p. 1: Water Absorption 23°C / 24h MPTS ISO 3167 A %
ISO 3167As the sheet prints it: 23°C / 24h MPTS A ISO 3167
tested at 23°Cmoisture state not stated
Mould shrinkage orientation not stated0.4-0.7 %p. 1: Linear Mould Shrinkage
ISO 3167As the sheet prints it: DIN 16901; specimen=MPTS ISO 3167 A; VSR 3mm
moisture state not stated

Print settings

Nozzle
not stated
Bed
not stated
Heated chamber
not stated
Drying
not stated
Hardened nozzle
not stated
Its print profile, in the documents' words

Price

Not in the price sample.

Its 2 documents

What the maker says (5)
Extrudr DURAPRO PA12 CFStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–290Hardened nozzle neededBed, °C110Chamber, °C—Drying, °C, h658–12 h

Extrudr DURAPRO PA12 CFExtrudr

Published values

PropertyAs publishedConditionsOn the Overview
Extrudr, TECHNICAL DATA SHEET DURAPRO PA12 CF12 valuesThe same values also in Extrudr, SCHEDA TECNICA DURAPRO PA12 CF.Unless a row says otherwise: moulded bar (resin supplier's value)
Tensile modulus2820 MPap. 1: Tensile Modulus ISO 527-1 MPa
ISO 527As the sheet prints it: ISO 527-1
not in the median: measured on a moulded bar
Tensile strength (yield or break not stated)60,4 MPap. 1: Tensile Strength (Indentation Depth) ISO 527-2 MPa
ISO 527As the sheet prints it: ISO 527-2
not in the median: measured on a moulded bar
Elongation at break35 %p. 1: Nominal Elongation at Break ISO 527-2 %
ISO 527As the sheet prints it: ISO 527-2
not in the median: measured on a moulded bar
Elongation at yield4 %p. 1: Tensile Elongation (Indentation Depth)
ISO 527As the sheet prints it: ISO 527-2
listed under other properties
Charpy impact strength9 kJ/m²p. 1: Charpy Notched Impact Strength (+23°C) ISO 179/1eA kJ/m²
ISO 179As the sheet prints it: +23°C kJ/m² ISO 179/1eA
tested at 23°C		not in the median: measured on a moulded bar
Charpy impact strength5 kJ/m²p. 1: Charpy Notched Impact Strength (-30°C) ISO 179/1eA kJ/m²
ISO 179As the sheet prints it: -30°C kJ/m² ISO 179/1eA
tested at -30°C		not in the median: measured on a moulded bar
HDT at 0.45 MPa139 °Cp. 1: Heat Deflection Temperature (DTUL) 0.45 MPa, unannealed ISO 75-2/B °C
ISO 75As the sheet prints it: 0.45 MPa ISO 75-2/B
as printedunannealed
not in the median: measured on a moulded bar
HDT at 1.8 MPa58 °Cp. 1: Heat Deflection Temperature (DTUL) 1.8 MPa, unannealed ISO 75-2/A °C
ISO 75As the sheet prints it: 1.8 MPa ISO 75-2/A
as printedunannealed
not in the median: measured on a moulded bar
Vicat softening temperature145 °Cp. 1: Vicat Softening Temperature ISO 306/B50 °C
ISO 306As the sheet prints it: ISO 306/B50
Density1.03 g/cm³p. 1: Density ISO 1183 g/cm³ISO 1183
Water absorption1.6 %p. 1: Water Absorption (Saturation 23°C) ISO 62 %also in Extrudr, SCHEDA TECNICA DURAPRO PA12 CF
ISO 62As the sheet prints it: Saturation 23°C % ISO 62
tested at 23°C
Melt volume-flow rate7 cm³/10minp. 1: Melt Volume Rate (MVR) 235°C/5.0 kg ISO 1133 cm³/10min
ISO 1133As the sheet prints it: MVR 235°C/5.0 kg cm³/10min ISO 1133
tested at 235°C
Extrudr, TECHNICAL DATA SHEET DURAPRO PA12 CF1 value
Dielectric strength25 kV/mmp. 1: Dielectric Strength IEC 60243-1 kV/mm
IEC 60243As the sheet prints it: IEC 60243-1

Print settings

Nozzle
260–290 °Cown data sheet
Bed
110 °Cown data sheet
Heated chamber
not stated
Drying
65 °C for 8–12 hown data sheet
Hardened nozzle
neededown data sheet
Its 4 print profiles, in the documents' words

Price

Not in the price sample.

Its 5 documents

What the maker says (8)

Values are for the colour each sheet tested; pigment can change them.