PA12
8 products from 7 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
8 products
Key
- set apart: test bar not described as printed, or no stated load
- shared data sheet
- converted price
- not published
How the numbers are worked out
Fiberlogy Nylon PA12Strength XY, MPa45Modulus XY, GPa1.4Charpy notched, kJ/m²12HDT 0.45, °C135HDT 1.8, °C55Price, CAD/kg123Nozzle, °C255–270Bed, °C100Chamber, °C—Drying, °C, h704 h
Fiberlogy Nylon PA12Fiberlogy
Data sheet shared with Fiberlogy R Nylon: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA128 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12. | |||
| Tensile break strength orientation not stated | 51 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 200 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: another value of this product is in it |
| Elongation at yield orientation not stated | 5 %p. 1: Elongation @ Yield ISO 527 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12 | ISO 527 | listed under other properties |
| Flexural modulus orientation not stated | 1150 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | 12 kJ/m²p. 1: Izod Impact Strength (Notched) @ 23°C | ISO 180tested at 23 °C | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 145 °Cp. 1: Vicat Softening Temperature ISO 306 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12 | ISO 306 | |
| Melting temperature | 178 °Cp. 1: Melting Temperature Tm DSC °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12 | DSCAs the sheet prints it: Tm DSC | |
| Continuous service temperature | 65 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C | no standard namedAs the sheet prints it: UL 746 | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA126 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12.Unless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 1400 MPap. 1: Tensile Modulus ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 45 MPap. 1: Tensile Strength @ Yield ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 50 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 12 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 135 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12 | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 55 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12 | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Fiberlogy, PA12 Nylon Filament1 value | |||
| Charpy impact strength orientation not stated | 12 kJ/m² (ISO 179)p. 1: Charpy impact strength (notched) @ 23°C | ISO 179As the sheet prints it: ISO 179; notched | not in the median: another value of this product is in it |
| Fiberlogy, rNylon Filament1 value | |||
| Izod impact strength orientation not stated | 12 kJ/m² (ISO 180)p. 1: Izod impact strength (uncharved) @ 23°C | ISO 180As the sheet prints it: ISO 180; unnotched | not in the median: unnotched |
Print settings
- Nozzle
- 255–270 °Cown data sheet
- Bed
- 100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, Nylon PA12 - Fiberlogy, Fiberlogy, PA12 Nylon Filament.
Its 4 print profiles, in the documents' words
- Nozzle 255°C - 270°C; Bed 100°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12p. 1: Recommended printing settings
- Nozzle 255°C - 270°C; Bed 100°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy Nylon PA12p. 1: Recommended printing settings
- Nozzle 255–270°C; Bed 110°C; Chamber it is recommended to use a 3D printer with an enclosed and heated chamber; Drying 70°C / 4 hoursFiberlogy, Nylon PA12 - Fiberlogyp. 1: Exact-product chamber guidance: it is recommended to use a 3D printer with an enclosed and heated chamber; p. 1: Bed material
- Nozzle 255–270°C; Bed 110°C; Chamber enclosed and heated chamber recommended; Drying 70°C / 4 hoursFiberlogy, PA12 Nylon Filamentp. 1: Description; p. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
123 CAD/kgits one regular price in the sample
1 listing
- Texas Filament Supply: 123 CAD/kgNylon PA12 / Natural - New 1 KG Spoolin its price; Texas Filament Supply (USD storefront) lists 87 USD for 1 kg: 87 USD/kg before VAT, × 1.4188 CAD per USD (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 6 documents
What the maker says (1)
- Pitfalls and limitations
Just keep in mind that nylon is not resistant to concentrated acids and bases.
Fiberlogy, PA12 Nylon Filamentp. 1
Chemicals and environment (1)
- Post-processing: described in words
Fiberlogy Nylon PA12 is easy to post-process—it can be painted and machined with tools used for metal. This makes the prints not only functional but also aesthetically pleasing and tailored to the user’s specific needs.
Fiberlogy, PA12 Nylon Filamentp. 1: exact product paragraph, source text line 49
Fiberlogy R NylonStrength XY, MPa45Modulus XY, GPa1.4Charpy notched, kJ/m²12HDT 0.45, °C135HDT 1.8, °C55Price, CAD/kg—Nozzle, °C255–270Bed, °C100Chamber, °C—Drying, °C, h704 h
Fiberlogy R NylonFiberlogy
Data sheet shared with Fiberlogy Nylon PA12: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R Nylon10 values | |||
| Tensile modulus orientation not stated | 1400 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 45 MPap. 1: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 50 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 5 %p. 1: Elongation @ Yield ISO 527 % | ISO 527 | listed under other properties |
| Izod impact strength | 12 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23°C ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 135 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 55 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 145 °Cp. 1: Vicat Softening Temperature ISO 306 °C | ISO 306 | |
| Melting temperature | 178 °Cp. 1: Melting Temperature Tm ISO 11357-3 °C | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.01 g/cm3p. 1: Specific Density ISO 1183 g/cm3 | ISO 1183 | |
Print settings
- Nozzle
- 255–270 °Cown data sheet
- Bed
- 100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, rNylon Filament, Fiberlogy, rNylon Filament - Fiberlogy.
Its 3 print profiles, in the documents' words
- Nozzle 255°C - 270°C; Bed 100°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy R Nylonp. 1: Recommended printing settings
- Nozzle 255–270°C; Bed 110°C; Drying 70°C / 4 hoursFiberlogy, rNylon Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
- Nozzle 255–270°C; Bed 110°C; Drying 70°C / 4 hoursFiberlogy, rNylon Filament - Fiberlogyp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Benefits
Fiberlogy rNylon stands out for its excellent resistance to heat, oils, greases, fuels, solvents, and many chemicals
Fiberlogy, rNylon Filamentp. 1
Extrudr DURAPRO PA12Strength XY, MPa50Modulus XY, GPa1.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C55Price, CAD/kg—Nozzle, °C260–290Bed, °C110Chamber, °C—Drying, °C, h6512 h
Extrudr DURAPRO PA12Extrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, DURAPRO PA12 official maker product page15 valuesThe same values also in Extrudr, TECHNICAL DATA SHEET DURAPRO PA12. | |||
| Tensile modulus orientation not stated | 1500 MPap. 1: Tensile modulus (Young's modulus) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 50 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | > 50 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 1300 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 45 MPap. 1: Flexural strength | ISO 178 | not in the median: the only value of its test, shown as published |
| HDT at 1.8 MPa | 55 °Cp. 1: Heat deflection temp. (HDT/A) — 1.8 MPaalso in Extrudr, TECHNICAL DATA SHEET DURAPRO PA12 | ISO 75As the sheet prints it: ISO 75-1; 1.8 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 45 °Cp. 1: Glass transition temp. (Tg) | ISO 11357As the sheet prints it: ISO 11357-1 (DSC) | in the median |
| Melting temperature | 180 °Cp. 1: Melting point (Tm) | ISO 3146As the sheet prints it: ISO 3146-C | |
| Decomposition temperature | 300 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Water absorption | 1.6%p. 1: Low moisture absorptionalso in Extrudr, TECHNICAL DATA SHEET DURAPRO PA12 | no standard statedafter moisture conditioningsaturation | |
| Melt volume-flow rate | 8 cm³/10 minp. 1: Melt volume rate (MVR) — 235°C/5.0 kgalso in Extrudr, TECHNICAL DATA SHEET DURAPRO PA12 | no standard namedAs the sheet prints it: temp/load=235°C/5.0 kg | |
| Mould shrinkage orientation not stated | 1 %p. 1: Mould shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
| Volume resistivity | 100000000000000 Ω·cmp. 1: Specific volume resistivity | no standard stated | |
| Surface resistivity | 100000000000000 Ωp. 1: Specific surface resistance | no standard stated | |
| Comparative tracking index | 600 Vp. 1: Comparative tracking index (CTI) | no standard stated | |
| Extrudr, TECHNICAL DATA SHEET DURAPRO PA129 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 1440 MPap. 1: Tensile Modulus ISO 527-1 MPa | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 43.0 MPap. 1: Tensile Strength (Indentation Depth) ISO 527-2 MPa | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a moulded bar |
| Elongation at break | 50 %p. 1: Nominal Elongation at Break ISO 527-2 % | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a moulded bar |
| Charpy impact strength | 11 kJ/m²p. 1: Charpy Notched Impact Strength (+23°C) ISO 179/1eA kJ/m² | ISO 179As the sheet prints it: +23°C kJ/m² ISO 179/1eA | not in the median: measured on a moulded bar |
| Charpy impact strength | 6.0 kJ/m²p. 1: Charpy Notched Impact Strength (-30°C) ISO 179/1eA kJ/m² | ISO 179As the sheet prints it: -30°C kJ/m² ISO 179/1eA | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 135 °Cp. 1: Heat Deflection Temperature (DTUL) 0.45 MPa, unannealed ISO 75-2/B °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75-2/Bas printedunannealed | not in the median: measured on a moulded bar |
| Vicat softening temperature | 142 °Cp. 1: Vicat Softening Temperature ISO 306/B50 °C | ISO 306As the sheet prints it: ISO 306/B50 | |
| Density | 1.01 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Dielectric strength | 30 kV/mmp. 1: Dielectric Strength | specimen not stated, IEC 60243As the sheet prints it: IEC 60243-1 | |
Print settings
- Nozzle
- 260–290 °Cown data sheet
- Bed
- 110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 65 °C for 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 260-290 °C; Bed 110 °CExtrudr, TECHNICAL DATA SHEET DURAPRO PA12p. 2: Recommended printing settings; p. 2: Hardened Nozzle; p. 2: Adhesive; p. 2: nozzle_diameter
- Nozzle 260–290 °C; Bed 110 °C; Drying Drying temperature 65 °C; Drying time 8–12 hExtrudr, DURAPRO PA12 official maker product pagep. 1: Exact product drying table and own nozzle recommendation; other recipe fields not transcribed in this scoped profile; p. 1: Nozzle temperature; p. 1: Build plate temperature; p. 1: Surface preparation; p. 1: Enclosed chamber required; p. 1: Hardened nozzle required; p. 1: Recommended settings for printers with a 0.4 mm nozzle
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
With its excellent chemical resistance, low moisture absorption and easy handling, it is the ideal choice for demanding 3D printing projects.
Extrudr, TECHNICAL DATA SHEET DURAPRO PA12p. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET DURAPRO PA12p. 2 - Benefits
DuraPro PA12 offers significantly lower moisture absorption than PA6-based nylons (1.6% vs. typically around 9-10% at saturation), giving it better long-term dimensional stability. This makes it easier to store and print reliably, with less risk of warping from humidity.
Extrudr, DURAPRO PA12 official maker product pagep.1: Exact product FAQ/highlight, source text line101 - Pitfalls and limitations
No. DuraPro PA12 is not suitable for food contact.
Extrudr, DURAPRO PA12 official maker product pagep.1: Exact product FAQ/highlight, source text line106
Fillamentum Nylon FX256Strength XY, MPa45Modulus XY, GPa1.4Charpy notched, kJ/m²7HDT 0.45, °C110HDT 1.8, °C50Price, CAD/kg—Nozzle, °C235–260Bed, °C80–105Chamber, °C—Drying, °C, h80≥ 3 h
Fillamentum Nylon FX256Fillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, Nylon FX25613 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1400 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 45,0 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 50 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 7 kJ/m2p. 1: Charpy impact strength The material has great chemical resistance | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 110 °Cp. 1: Heat distortion temperature 110 °C ISO 75 0,45 MPa | ISO 75As the sheet prints it: 0,45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 50 °Cp. 1: Heat distortion temperature | ISO 75As the sheet prints it: 1,8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 140 °Cp. 1: Vicat softening temperature | ISO 306 | |
| Density | 1,01 g/cm3p. 1: Material density | ISO 1183 | |
| Melt mass-flow rate | 95 g/10 minp. 1: Melt flow index | no standard stated | |
| Surface resistivity | 1 × 10^15 Ωp. 1: Surface resistivity | no standard stated | |
| Dielectric strength | 27,0 kV/mmp. 1: Dielectric strength | no standard stated | |
| Relative permittivity | 2,0p. 1: Dielectric constant (2,0) | no standard namedAs the sheet prints it: frequency=10^6 Hz | |
| Relative permittivity | 3,0p. 1: Dielectric constant (3,0) | no standard namedAs the sheet prints it: frequency=100 Hz | |
| Fillamentum, Nylon CF15 Carbon | Fillamentum3 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 1: Tensile strength (45 MPa) | no standard stated | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 50%p. 1: Elongation on break (50%) | no standard stated | not in the median: another value of this product is in it |
| Impact strength, test unclear orientation not stated | 7 kJ/m2 ***p. 1: Impact resistance (7 kJ/m2 ***) | no standard statedWhich test: probably Charpy | listed under other properties |
| Fillamentum, Safety Data Sheet: Fillamentum Nylon FX2562 valuesUnless a row says otherwise: specimen not stated | |||
| Melting temperature | > 172 °Cp. 3: Melting/freezing point | no standard stated | |
| Decomposition temperature | > 300 °Cp. 4: Decomposition temperature | no standard stated | |
Print settings
- Nozzle
- 235–260 °Cown data sheet
- Bed
- 80–105 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for ≥ 3 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fillamentum, 3D PRINTING GUIDE Fillamentum Nylon FX256 (Polyamide 12).
Its 3 print profiles, in the documents' words
- Nozzle 235–260 °C; Bed 80–105 °CFillamentum, Nylon FX256p. 1: Recommended printing settings; p. 1: Bed adhesive
- Drying 80 °C; minimum drying time 3 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row NYLON FX256; own minimum-time/temperature/need columns, with p1 restrictions
- Nozzle 235 – 255 °C; Bed 90 – 110 °C; Drying In case of moist material, re-dry it in appropriate device; 80 °C for 3 hoursFillamentum, 3D PRINTING GUIDE Fillamentum Nylon FX256 (Polyamide 12)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Heated bed surface; p. 1: Heated chamber / enclosure; p. 1: Storing (re-dry)
Price
Not in the price sample.
Its 6 documents
- Fillamentum, Nylon FX256
- Fillamentum, Safety Data Sheet: Fillamentum Nylon FX256
- Fillamentum, Nylon CF15 Carbon | Fillamentum
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
- Fillamentum, Drying of filaments before processing on 3D printer
- Fillamentum, 3D PRINTING GUIDE Fillamentum Nylon FX256 (Polyamide 12)
Chemicals and environment (2)
- Hydrolytic stability: described in words
It is resistant to hydrolysis, it means to hot water up to 80 °C.
Hydrolysis / dimensional stabilityFillamentum, Nylon FX256p. 1: Description, hydrolysis sentence - UV and outdoor: described in words
It keeps its properties after ionizing and UV radiation.
UVFillamentum, Nylon FX256p. 1: Description, radiation sentence
FormFutura STYX-12Strength XY, MPa60Modulus XY, GPa1.4Charpy notched, kJ/m²14HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–270Bed, °C80–120Chamber, °C—Drying, °C, h—
FormFutura STYX-12FormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet STYX-128 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1400 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 60.0 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 150 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 14 KJ/m²p. 1: Impact strength | ISO 179tested at 23° C (73° F)notched | not in the median: set apart (never used to pass), test bar not described as printed |
| Hardness | 81 Shore Dp. 1: Flexural modulus - - - Hardness Thermal | ISO 868 | in the median |
| Vicat softening temperature | 105° Cp. 1: Viscat softening temp. | ISO 868As the sheet prints it: ISO 868; 264psiannealed at a temperature its sheet does not state for a time its sheet does not stateannealed | |
| Melting temperature | 250 ± 10° Cp. 1: Melting termperature | ISO 11357 | |
| Density | 1.02 g/ccp. 1: Specific gravity | ISO 1183 | |
Print settings
- Nozzle
- 240–270 °Cown data sheet
- Bed
- 80–120 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
- Annealing
- temperature not statedown data sheet
Its 2 print profiles, in the documents' words
- Nozzle ± 240 - 270° CFormFutura, Technical Data Sheet STYX-12p. 1: Recommended printing settings
- Nozzle ± 240 – 270° C; Bed ± 80 – 120° CFormFutura, STYX-12p. 1: General printing guidelines
Price
Not in the price sample.
Its 3 documents
What the maker says (11)
- Benefits
STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
FormFutura, Technical Data Sheet STYX-12p. 1 - Benefits
This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.
FormFutura, Technical Data Sheet STYX-12p. 1 - Moisture sensitivity
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures.
FormFutura, Technical Data Sheet STYX-12p. 1 - Benefits
Superb mechanical properties
FormFutura, STYX-12p. 1 - Benefits
Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
FormFutura, STYX-12p. 1 - Benefits
Excellent chemical resistance
FormFutura, STYX-12p. 1 - Benefits
Excellent weather and UV resistance
FormFutura, STYX-12p. 1 - Warping and shrinkage
Outstanding dimensional stability
FormFutura, STYX-12p. 1 - Printing advice
Good first layer adhesion to EasyPad + DimaFix prepared print bed
FormFutura, STYX-12p. 1 - Surface finish
Very clear in its natural form (without added colorants)
FormFutura, STYX-12p. 1 - Printing advice
Above displayed settings are meant as guidance to find your optimal print settings.
FormFutura, STYX-12p. 1
Fabru Polyamide 12 (PA12)Strength XY, MPa60Modulus XY, GPa1.5Charpy notched, kJ/m²—HDT 0.45, °C100HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C100–120Chamber, °C—Drying, °C, h804–12 h
Fabru Polyamide 12 (PA12)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Polyamide 12 (PA12)7 values | |||
| Tensile modulus orientation not stated | 1500 MPap. 1: Tensile modulus (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 60 MPap. 1: Yield stress (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 50 %p. 1: Elongation at break (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 6 %p. 1: Elongation at yield (ISO 527) | ISO 527 | listed under other properties |
| HDT at 0.45 MPa | 100 °Cp. 1: Heat deflection temperature | ISO 75As the sheet prints it: 0.45 MPa (ISO 75) | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.00 g/cm3p. 1: Density (ISO 1183) | ISO 1183 | |
| Mould shrinkage orientation not stated | 0.45-0.6 %p. 1: Shrinkage (ISO 294-4) | ISO 294As the sheet prints it: ISO 294-4 | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 4–12 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 250-270 °C; Bed 100-120 °C; Drying 80°C, 4-12hFabru, Polyamide 12 (PA12)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
This makes PA12 the ideal material in humid environments where high impact strength, good sliding friction properties and good wear resistance are required.
Fabru, Polyamide 12 (PA12)p. 1 - Benefits
PA12 has very good resistance to stress cracking and high flexural strength.
Fabru, Polyamide 12 (PA12)p. 1 - Benefits
Outstanding transparency
Fabru, Polyamide 12 (PA12)p. 1 - Pitfalls and limitations
Lower heat resistance than PA6
Fabru, Polyamide 12 (PA12)p. 1
eSUN ePA12Strength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–290Bed, °C70–90Chamber, °C—Drying, °C, h70≥ 12 h
eSUN ePA12eSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePA12 Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 50.81 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 165.41 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 659.49 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 47.27 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 10.14 kJ/㎡p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 100 ℃p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: 0.45MPa GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.012 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 260–290 °Cown data sheet
- Bed
- 70–90 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70 °C for ≥ 12 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260 - 290℃; Bed 70-90°C; Drying needs to be dried (70℃/>12H) before printingeSUN, ePA12 Technical Data Sheetp. 2: Recommended printing settings; p. 2: Drying note; p. 2: Footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (12)
- Good for
Machinery
eSUN, ePA12 Technical Data Sheetp. 1 - Good for
self-lubricating wear resistance, can print mechanical gears
eSUN, ePA12 Technical Data Sheetp. 1 - Benefits
Excellent printability
eSUN, ePA12 Technical Data Sheetp. 1 - Benefits
Abrasive resistance
eSUN, ePA12 Technical Data Sheetp. 1 - Benefits
Heat resistance • High toughness
eSUN, ePA12 Technical Data Sheetp. 1 - Benefits
High rigidity
eSUN, ePA12 Technical Data Sheetp. 1 - Benefits
ePA12 has high toughness, high impact resistance, and can be used to print durable parts
eSUN, ePA12 Technical Data Sheetp. 1 - Warping and shrinkage
High dimensional stability
eSUN, ePA12 Technical Data Sheetp. 1 - Warping and shrinkage
low shrinkage, not easy to warp and crack during printing.
eSUN, ePA12 Technical Data Sheetp. 1 - Surface finish
Matte surface effect
eSUN, ePA12 Technical Data Sheetp. 1 - Moisture sensitivity
low water absorption, the size of printed parts is less affected by humidity and temperature.
eSUN, ePA12 Technical Data Sheetp. 1 - Moisture sensitivity
It is recommended to use it with the eBOX cartridge when printing.
eSUN, ePA12 Technical Data Sheetp. 2
3DXTECH AMIDEX Nylon 12Strength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg242Nozzle, °C275–300Bed, °C60–100Chamber, °CnoneDrying, °C, h804 h
3DXTECH AMIDEX Nylon 123DXTECH
Published values
No value is on file for this product.
Print settings
- Nozzle
- 275–300 °Cown data sheet
- Bed
- 60–100 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 80 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 275-300°C; Bed 60-100°C; Chamber Not required; Drying 80°C for 4 h3DXTECH, AMIDEX™ NYLON 12Print Recommendations
- Nozzle 275-300 C; Bed 60-100 C; Chamber Not Required; Drying 80C for 4 hours3DXTECH, AMIDEX™ NYLON 12p. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Drying Specs
Price
242 CAD/kgits one regular price in the sample
1 listing
- 3DXTECH: 242 CAD/kgAMIDEX™ NYLON 12 / Black / 1.75mm / 750g (SKU 140BK00A-750G)in its price; 3DXTECH (USD storefront) lists 128 USD for 0.75 kg: 171 USD/kg before VAT, × 1.4188 CAD per USD (Bank of Canada, 29 Sep 2026). Used only where no Canadian shop in the sample sells the product. Shipping, duty and Canadian stock are not included.; seen 30 Sep 2026
Its 3 documents
What the maker says (1)
- Benefits
Excellent printability and dimensional stability without fillers
3DXTECH, AMIDEX™ NYLON 12p. 1
Chemicals and environment (2)
- Organic solvent resistance: described in words
Resistance to ethers, esters and many bases is claimed without exposure conditions.
Chemical exposure3DXTECH, AMIDEX™ NYLON 12Chemical exposure - Application notes: described in words
Unfilled, resilient nylon parts when fibre reinforcement is unnecessary.
3DXTECH, AMIDEX™ NYLON 12Application
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.
Reference specimens and studies
A resin or study specimen, not a product you can buy.
Stratasys 310-21800 (PA12)Strength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C95HDT 1.8, °C84Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
Stratasys 310-21800 (PA12)Stratasys
A resin or study reference, not a product you can buy.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Stratasys, FDM Nylon 12 Data Sheet22 valuesUnless a row says otherwise: printed specimenprint settingsPrinted on a Stratasys F900, T16 tip, 0.254 mm layer height; values as printed | |||
| Tensile modulus Z (ZX) | 1.25 (0.12) GPaTable 4: Modulus (Elastic), ZX orientation | ASTM D638as printedAs printed | not in the median: a reference specimen, not a product for sale |
| Tensile modulus XZ | 1.51 (0.087) GPaTable 4: Modulus (Elastic), XZ orientation | ASTM D638as printedAs printed | not in the median: measured on a bar in another orientation |
| Tensile yield strength Z (ZX) | 41.8 (0.67) MPaTable 4: Yield Strength, ZX orientation | ASTM D638as printedAs printed | not in the median: a reference specimen, not a product for sale |
| Tensile yield strength XZ | 49.3 (0.48) MPaTable 4: Yield Strength, XZ orientation | ASTM D638as printedAs printed | not in the median: measured on a bar in another orientation |
| Tensile break strength Z (ZX) | 41.2 (0.72) MPaTable 4: Strength @ Break, ZX orientation | ASTM D638as printedAs printed | not in the median: a reference specimen, not a product for sale |
| Tensile break strength XZ | 33.4 (1.7) MPaTable 4: Strength @ Break, XZ orientation | ASTM D638as printedAs printed | not in the median: measured on a bar in another orientation |
| Elongation at break Z (ZX) | 6.5 (0.39) %Table 4: Elongation @ Break, ZX orientation | ASTM D638as printedAs printed | not in the median: a reference specimen, not a product for sale |
| Elongation at break XZ | 30 (23) %Table 4: Elongation @ Break, XZ orientation | ASTM D638as printedAs printed | not in the median: measured on a bar in another orientation |
| Elongation at yield Z (ZX) | 5.8 (0.16) %Table 4: Elongation @ Yield, ZX orientation | ASTM D638as printedAs printed | listed under other properties |
| Elongation at yield XZ | 6.1 (0.068) %Table 4: Elongation @ Yield, XZ orientation | ASTM D638as printedAs printed | listed under other properties |
| Flexural modulus XZ | 1.26 (0.13) GPaTable 4: Flexural Modulus, XZ orientation | ASTM D790As the sheet prints it: ASTM D790, Procedure Aas printedAs printed | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 1.20 (0.12) GPaTable 4: Flexural Modulus, ZX orientation | ASTM D790As the sheet prints it: ASTM D790, Procedure Aas printedAs printed | not in the median: measured on a bar in another orientation |
| Flexural stress at conventional deflection XZ | 56.5 (5.0) MPap. 6: Strength @ 5% Strain (XZ) | ASTM D790As the sheet prints it: ASTM D790 Procedure A | listed under other properties |
| Flexural stress at conventional deflection ZX | 54.5 (4.7) MPap. 6: Strength @ 5% Strain (ZX) | ASTM D790As the sheet prints it: ASTM D790 Procedure A | listed under other properties |
| Izod impact strength XZ | 138 (22) J/mp. 6: Notched (J/m) (XZ) | ASTM D256, ASTM D4812print settings not stated | not in the median: in J/m |
| Izod impact strength ZX | 71.0 (14) J/mp. 6: Notched (J/m) (ZX) | ASTM D256, ASTM D4812print settings not stated | not in the median: in J/m |
| Compression strength XZ | 327 (33) MPap. 6: Yield Strength (XZ) | ASTM D695print settings not stated | |
| Compression strength ZX | 557 (48) MPap. 6: Yield Strength (ZX) | ASTM D695print settings not stated | |
| HDT XY, at 0.45 MPa | 94.7 °C (XY)Table 3: HDT @ 66 psi, XY | ASTM D648As the sheet prints it: ASTM D648 Method B, 66 psi (0.455 MPa)as printedAs printed | not in the median: a reference specimen, not a product for sale |
| HDT XY, at 1.8 MPa | 84.3 °C (XY)Table 3: HDT @ 264 psi, XY | ASTM D648As the sheet prints it: ASTM D648 Method B, 264 psi (1.82 MPa)as printedAs printed | not in the median: a reference specimen, not a product for sale |
| Glass transition temperature | 34.03 °CTable 3: Tg | ASTM D7426As the sheet prints it: ASTM D7426, inflection point | not in the median: a reference specimen, not a product for sale |
| Density | Specific gravity 1.01 at 23 °C g/cm³Table 3: Specific Gravity | specimen not stated, ASTM D257tested at 23 °Cprint settings not stated | |
Rodrigues et al., Polymers 18(2), 302, Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)12 valuesUnless a row says otherwise: printed specimentested at Room temperatureprint settingsStratasys Fortus 450; XY; 0.254 mm layer; 100% infill; ±45° raster; nozzle 255°C, bed 85°C; ASTM D638-03 specimen ~5.2 mm thick; sinusoidal tension, 10 Hz, R=0.05; sigma_max=39.18 MPa, sigma_min=1.96 MPa, amplitude=18.61 MPa. | |||
| Fatigue life XY | 1121 cyclesp. 7: Fatigue table specimen 1 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 29,657 cyclesp. 7: Fatigue table specimen 2 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 429,098 cyclesp. 7: Fatigue table specimen 3 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 1,000,000 cyclesp. 7: Fatigue table specimen 4 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 1,000,000 cyclesp. 7: Fatigue table specimen 5 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 1,000,000 cyclesp. 7: Fatigue table specimen 6 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 658,938 cyclesp. 7: Fatigue table specimen 7 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 951,076 cyclesp. 7: Fatigue table specimen 8 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 647,745 cyclesp. 7: Fatigue table specimen 9 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 395,066 cyclesp. 7: Fatigue table specimen 10 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 73,546 cyclesp. 7: Fatigue table specimen 11 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
| Fatigue life XY | 2551 cyclesp. 7: Fatigue table specimen 12 | no standard namedAs the sheet prints it: Study staircase method; run-out 1,000,000 cycles | |
Print settings
No print settings on file for this product.
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
Its excellent fatigue properties make it a good option for repetitive-flex applications such as snap-fit clips and closures and press-fit inserts.
Stratasys, FDM Nylon 12 Data Sheetp. 2 - Good for
Other applications include jigs, fixtures and low-volume production parts, as well as accurate prototyping of nylon 12 high-volume injection molded parts.
Stratasys, FDM Nylon 12 Data Sheetp. 2 - Benefits
A strong engineering thermoplastic, it exhibits toughness and high impact strength, without being brittle.
Stratasys, FDM Nylon 12 Data Sheetp. 2