PA6
9 products from 6 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
9 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- added filler or additive
- shared data sheet
- not published
How the numbers are worked out
Nanovia PA-6Strength XY, MPa51Modulus XY, GPa2.1Charpy notched, kJ/m²6HDT 0.45, °C140HDT 1.8, °C50Price, CAD/kg—Nozzle, °C240–260Bed, °C80–100Chamber, °C60Drying, °C, h1006 h
Nanovia PA-6Nanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PA-6 : High resistance : Nanovia13 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2100 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 51 MPap. 1: Tensile strength at yield | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | >50 %p. 1: Elong. at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 1650 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 85 MPap. 1: Flexural strength at yield | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 6 kJ/m2p. 1: Charpy (notched) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 5 kJ/m2p. 1: IZOD impact notched | ISO 180As the sheet prints it: ISO 180-1A | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 140 °Cp. 1: HDT – B | ISO 75As the sheet prints it: ISO 75 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 50 °Cp. 1: HDT – A | ISO 75As the sheet prints it: ISO 75 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 190 °Cp. 1: VICAT | ISO 306 | |
| Melting temperature | 205 °Cp. 1: Fusion temperature | ISO 11357As the sheet prints it: DSC – ISO 11357-1 | |
| Density | 1,14 g/cm3p. 1: Density | ISO 1183 | |
| Water absorption | 0.5 %p. 1: Humidity absorption | ISO 62 | |
| Nanovia, PA-6 official material safety data sheet1 value | |||
| Density | ~1,20 g/cm3p. 2: Density | no standard stated | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- 60 °Cown data sheet
- Drying
- 100 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 240 – 260 °C; Bed 80 – 100 °C; Chamber 60 °C; Drying Dehydrate for 6h at 100°C prior to printing.Nanovia, Nanovia PA-6 : High resistance : Nanoviap. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 3 documents
What the maker says (7)
- Good for
Nanovia PA-6 allows for mechanical pieces that need to be shock, impact, as well as heat resistant.
Nanovia, Nanovia PA-6 : High resistance : Nanoviap. 1 - Good for
It’s also used for functional prototypes, hinges, and even cogs.
Nanovia, Nanovia PA-6 : High resistance : Nanoviap. 1 - Benefits
Nanovia PA-6 blends mechanical, heat, and chemical resistance.
Nanovia, Nanovia PA-6 : High resistance : Nanoviap. 1 - Benefits
Widely used for industrial application, this filament does not snap but tears apart progressively.
Nanovia, Nanovia PA-6 : High resistance : Nanoviap. 1 - Warping and shrinkage
Warping 0.5 %
Nanovia, Nanovia PA-6 : High resistance : Nanoviap. 1 - Pitfalls and limitations
The product is not approved for medical applications.
Nanovia, PA-6 official material safety data sheetp. 2: Section7.2 safe storage/use exclusion - Benefits
Thermoplastic resin EU food contact 2002/72/EC
Nanovia, PA-6 official material safety data sheetp. 1: Section2.1 substance classification, English column
Chemicals and environment (3)
- Flammability: described in words
Flammability HB UL 94 @ 0.8 mm
Nanovia, Nanovia PA-6 : High resistance : Nanoviap. 1: Thermal properties, Flammability - Organic solvent resistance: described in words
Organic solvents degrade the material.
Nanovia, PA-6 official material safety data sheetp. 2: Section10.3 possible side reactions - UV and outdoor: described in words
Biodegradation and elimination (H2O): the product is inert and can lead some surface degradation under the UV action.
UVNanovia, PA-6 official material safety data sheetp. 3: Section12.2 persistence/degradability, own English column
FormFutura STYX PA6Strength XY, MPa50Modulus XY, GPa2.9Charpy notched, kJ/m²6.8HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C85–100Chamber, °C—Drying, °C, hdry first
FormFutura STYX PA6FormFutura
Data sheet shared with Spectrum PA6 Low Warp: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet STYX PA613 valuesUnless a row says otherwise: specimen not statedtested at 23 °C | |||
| Tensile modulus orientation not stated | 2900 MPap. 1: Tensile modulus (23°C, 1mm/min) | ISO 527As the sheet prints it: ISO 527-1/-2; 23 °C, 1 mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 50 MPap. 1: Tensile strength (23°C, 50mm/min) | printed specimen (implied by the document), ISO 527As the sheet prints it: ISO 527-1/-2; 23 °C, 50 mm/min | in the median |
| Elongation at break orientation not stated | 1,9%p. 1: Elongation at break (23°C, 50mm/min) | ISO 527As the sheet prints it: ISO 527-1/-2; 23 °C, 50 mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2800 MPap. 1: Flexural modulus (23°C, 2mm/min) | ISO 178As the sheet prints it: ISO 178; 23 °C, 2 mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 112 MPap. 1: Flexural strength (23°C, 2mm/min) | printed specimen (implied by the document), ISO 178As the sheet prints it: ISO 178; 23 °C, 2 mm/min | in the median |
| Charpy impact strength orientation not stated | 139 NB kJ/m²p. 1: Charpy unnotched impact strength, 23°C | ISO 179As the sheet prints it: ISO 179/1eU | not in the median: unnotched |
| Charpy impact strength | 6,8 kJ/m²p. 1: Charpy notched impact strength, 23°C | ISO 179As the sheet prints it: ISO 179/1eU | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 60°Cp. 1: Heat Deflection Temperature (HDT) | ISO 75As the sheet prints it: ISO 75-1/-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 185°Cp. 1: Melting temperature (DSC), 10°C/min | ISO 3146As the sheet prints it: ISO 3146; DSC, 10 °C/min | |
| Density | 1.15 g/cm3p. 1: Density | ISO 1183test temperature not stated | |
| Water absorption | 3,00%p. 1: Moisture absorption, 23°C/ 50% r.h. | ISO 62As the sheet prints it: ISO 62; 23 °C / 50% r.h. | |
| Water absorption | 9.5%p. 1: Water absorption, 23°C/ saturation in water | ISO 62As the sheet prints it: ISO 62; 23 °C / saturation in water | |
| Melt volume-flow rate | 120 cm3/10 minp. 1: Melt Volume Rate, 275°C/5kg | ISO 1133As the sheet prints it: ISO 1133; 275 °C, 5 kg | |
Print settings
- Nozzle
- 250–280 °CSpectrum PA6 Low Warp's data sheet, shared
- Bed
- 85–100 °CSpectrum PA6 Low Warp's data sheet, shared
- Heated chamber
- not stated
- Drying
- required, schedule not statedown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Drying dry the material prior to usage and print directly from a dry boxFormFutura, Technical Data Sheet STYX PA6p. 1: Storage and handling
Price
Not in the price sample.
Its 2 documents
What the maker says (13)
- Good for
This makes STYX PA6 a versatile nylon filament for 3D printing end-use parts.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Good for
This makes STYX PA6 a great filament for 3D printing functional engineering parts.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Good for
End-use parts that require a high wear resistance .
FormFutura, Technical Data Sheet STYX PA6p. 1 - Good for
Parts that are resistant to oils, lubricants and fuels.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Good for
Making jigs and fixtures.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Good for
Making electrical insulating parts.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Benefits
High strength and resistance to abrasion.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Benefits
STYX PA6 is an easier to 3D print nylon filament compared to other PA6 filaments.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Benefits
FormFutura's STYX PA6 exhibits a good resistance to oils, fuels, and lubricants.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Benefits
It has a high impact strength and good mechanical properties. 3D printed parts are strong, durable and show good resistance to wear and abrasion.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Warping and shrinkage
It has much lower warping and improved layer adhesion.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Warping and shrinkage
Low warping PA6 filament.
FormFutura, Technical Data Sheet STYX PA6p. 1 - Adhesion between layers
Easy to print with a very good layer adhesion.
FormFutura, Technical Data Sheet STYX PA6p. 1
3DXTECH WearX Wear Resistant PA6 CopolymerStrength XY, MPa62Modulus XY, GPa2.46Charpy notched, kJ/m²—HDT 0.45, °C143HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–275Bed, °C80–95Chamber, °C—Drying, °C, h90
3DXTECH WearX Wear Resistant PA6 Copolymer3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DXTECH, Technical Data Sheet: WearX™ Wear Resistant PA6 Copolymer 3D Filament9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2458 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 62 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 18 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2215 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 70 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 143 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: 0.45 ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 76 °Cp. 1: Glass Transition Temperature (Tg) DSC °C | DSCAs the sheet prints it: Tg DSC | in the median |
| Melting temperature | 198 °Cp. 1: Melt Temperature (Tm) DSC °C | DSCAs the sheet prints it: Tm DSC | |
| Density | 1.18 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183 | |
Print settings
- Nozzle
- 260–275 °Cown data sheet
- Bed
- 80–95 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 90 °Cown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 260-275°C; Bed 80-95°C; Drying 90°C3DXTECH, Technical Data Sheet: WearX™ Wear Resistant PA6 Copolymer 3D Filamentp. 1: Recommended printing settings; p. 1: Bed Temp; p. 1: Print Bed Enclosure; p. 1: Nozzle
- Nozzle 260-275C; Bed 80-95C; Chamber Recommended; Drying 90C for 4-6 hours3DXTECH, WEARX™ NYLON 6p. 1: Print Recommendations
Price
Not in the price sample.
Its 3 documents
What the maker says (17)
- Printing advice
Print Bed Enclosure: Recommended
3DXTECH, Technical Data Sheet: WearX™ Wear Resistant PA6 Copolymer 3D Filamentp. 1 - Moisture sensitivity
Drying Recommendations: 90°C for 4-6 Hours
3DXTECH, Technical Data Sheet: WearX™ Wear Resistant PA6 Copolymer 3D Filamentp. 1 - Benefits
3x Improved Wear Resistance vs. Unfilled AmideX PA6 Copolymer
3DXTECH, WEARX™ NYLON 6p. 1 - Benefits
High strength 62 MPa tensile str. with lightly lower impact / elongation vs. unfilled nylon
3DXTECH, WEARX™ NYLON 6p. 1 - Benefits
Improved chemical resistance compared to many other traditional 3D printing filaments
3DXTECH, WEARX™ NYLON 6p. 1 - Surface finish
Excellent printability with a more matte surface than unfilled PA6-66 copolymers
3DXTECH, WEARX™ NYLON 6p. 1 - Benefits
Good thermal properties with a Tg of 76C, 143C HDT, and Tm of 200C
3DXTECH, WEARX™ NYLON 6p. 1 - Good for
Ideal for 3D printing net shape or near-net shape tribological applications that were previously machined from stock shapes such as Nylatron GS MoS2 filled nylons
3DXTECH, WEARX™ NYLON 6p. 1 - Pitfalls and limitations
Wear resistance gradually diminishes as in-use temperatures rise and are limited in this formulation to 120C
3DXTECH, WEARX™ NYLON 6p. 1 - Pitfalls and limitations
Formulated for enhanced wear resistance under dry conditions, but the addition of external lubricants will extend wear-life
3DXTECH, WEARX™ NYLON 6p. 1 - Benefits
WearX PA6 has been modified for enhanced wear resistance for greatly improved wear resistance vs. standard PA6 (3X improvement!).
3DXTECH, WEARX™ NYLON 6p. 1 - Benefits
WearX PA6 offers a harder surface, improved dimensional stability, and a matte surface appearance.
3DXTECH, WEARX™ NYLON 6p. 1 - Good for
This material was inspired by the need for an enhanced material specifically formulated to resist sliding and rotational wear.
3DXTECH, WEARX™ NYLON 6p. 1 - Pitfalls and limitations
WearX PA6 was formulated for enhanced wear resistance under dry conditions, but the addition of external lubricants will extend wear-life, especially at elevated temperatures and under increased loading and/or speeds (high PV’s).
3DXTECH, WEARX™ NYLON 6p. 1 - Printing advice
Heated Chamber Recommended
3DXTECH, WEARX™ NYLON 6p. 1 - Nozzle wear
Nozzle Specs 0.2mm or Larger
3DXTECH, WEARX™ NYLON 6p. 1 - Moisture sensitivity
Drying Specs 90C for 4-6 hours
3DXTECH, WEARX™ NYLON 6p. 1
Fillamentum Fishy Filaments’ PorthcurnoStrength XY, MPa59Modulus XY, GPa2.2Charpy notched, kJ/m²5HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C80–110Chamber, °C—Drying, °C, h80≥ 5 h
Fillamentum Fishy Filaments’ PorthcurnoFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, Fishy Filaments’ Porthcurno by Fillamentum12 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2200 MPap. 1: Tensile modulus | ISO 527As the sheet prints it: ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 59 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 48 MPap. 1: Tensile strength at break | ISO 527As the sheet prints it: ISO 527-2 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 51 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2100 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 70 MPap. 1: Flexural strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 5 kJ/m² | ISO 180As the sheet prints it: ISO 180; notched | not in the median: set apart (never used to pass), test bar not described as printed |
| Impact strength, test unclear | 5 kJ/m2p. 1: Charpy impact strength | ISO 180notchedWhich test: cannot tell | listed under other properties |
| Glass transition temperature | 55 °Cp. 1: Glass transition temperature | ISO 11357 | in the median |
| Vicat softening temperature | 195 °Cp. 1: Vicat softening temperature | ISO 306 | |
| Melting temperature | 220 °Cp. 1: Melting temperature | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.13 g/cm3p. 1: Material density | ISO 1183 | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 80–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for ≥ 5 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Drying 80 °C; minimum drying time >5 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row PORTHCURNO; own minimum-time/temperature/need columns, with p1 restrictions
- Nozzle 250–280 °C; Bed 80–110 °CFillamentum, Porthcurnop. 1: Product page header
Price
Not in the price sample.
Its 4 documents
What the maker says (15)
- Surface finish
Smooth and shiny finish
Fillamentum, Fishy Filaments’ Porthcurno by Fillamentump. 1 - Surface finish
Sustainable 3D printing filament made from recycled fishing nets with a translucent appearance resembling the sea.
Fillamentum, Porthcurnop. 1 - Benefits
Porthcurno is a sustainable and eco-friendly option for 3D printing, as it reduces waste.
Fillamentum, Porthcurnop. 1 - Surface finish
It has a unique slightly translucent appearance that resembles the sea.
Fillamentum, Porthcurnop. 1 - Good for
Porthcurno is best suited for artistic and decorative 3D printing projects, as its unique appearance makes it a great choice for creating intricate and visually interesting designs.
Fillamentum, Porthcurnop. 1 - Good for
It can also be used for functional models that have excellent mechanical and chemical resistance.
Fillamentum, Porthcurnop. 1 - Benefits
100% recycled material from fishing nets
Fillamentum, Porthcurnop. 1 - Surface finish
Unique slightly translucent look reminiscent of the sea
Fillamentum, Porthcurnop. 1 - Benefits
Excellent mechanical resistance
Fillamentum, Porthcurnop. 1 - Benefits
Exceptional temperature resistance up to 180 °C
Fillamentum, Porthcurnop. 1 - Benefits
High tensile strength also at high temperatures
Fillamentum, Porthcurnop. 1 - Benefits
High impact resistance is preserved also under low temperatures (at -20 °C)
Fillamentum, Porthcurnop. 1 - Good for
Safe to use in electrical and electronic equipment
Fillamentum, Porthcurnop. 1 - Good for
Possibility of sterilization in the autoclave
Fillamentum, Porthcurnop. 1 - Moisture sensitivity
PORTHCURNO >5 h 80 °C 5
Fillamentum, Drying of filaments before processing on 3D printerp. 2
Chemicals and environment (5)
- Organic solvent resistance: described in words
Good chemical resistance
Acetone · Acetone · specificFillamentum, Fishy Filaments’ Porthcurno by Fillamentump.1: Chemical properties, own named group row and source rating - Oil and grease resistance: described in words
Good chemical resistance
Effect of oils and greaseFillamentum, Fishy Filaments’ Porthcurno by Fillamentump.1: Chemical properties, own named group row and source rating - Acid resistance: described in words
Low chemical resistance
Fillamentum, Fishy Filaments’ Porthcurno by Fillamentump.1: Chemical properties, own named group row and source rating - Alkali resistance: described in words
Low chemical resistance
Fillamentum, Fishy Filaments’ Porthcurno by Fillamentump.1: Chemical properties, own named group row and source rating - Organic solvent resistance: described in words
Low chemical resistance
Effect of organic solventFillamentum, Fishy Filaments’ Porthcurno by Fillamentump.1: Chemical properties, own named group row and source rating
Spectrum PA6 Low WarpStrength XY, MPa50Modulus XY, GPa2.9Charpy notched, kJ/m²6.8HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C85–100Chamber, °C—Drying, °C, h60≥ 12 h
Spectrum PA6 Low WarpSpectrum
Data sheet shared with FormFutura STYX PA6: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PA6 Low Warp11 valuesUnless a row says otherwise: specimen not statedtested at 23°C | |||
| Tensile modulus orientation not stated | 2900 MPap. 1: Tensile modulus (23°C, 1mm/min) | ISO 527As the sheet prints it: 23°C 1mm/min ISO 527-1/-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 50 MPap. 1: Tensile strength (23°C, 50mm/min) | ISO 527As the sheet prints it: 23°C 50mm/min ISO 527-1/-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 1,9 %p. 1: Elongation at break (23°C, 50mm/min) | ISO 527As the sheet prints it: 23°C 50mm/min ISO 527-1/-3 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2800 MPap. 1: Flexural modulus (23°C, 2mm/min) | ISO 178As the sheet prints it: 23°C 2mm/min ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 112 MPap. 1: Flexural strength (23°C, 2mm/min) | ISO 178As the sheet prints it: 23°C 2mm/min ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 6,8 kJ/m2p. 1: Charpy notched impact strength, 23°C | ISO 179As the sheet prints it: 23°C ISO 179/1eU | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 60 °Cp. 1: Heat Deflection Temperature (HDT) | ISO 75As the sheet prints it: ISO 75-1/-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 185 °Ctranscription correctedp. 1: Melting temperature (DSC), 10°C/min | ISO 3146As the sheet prints it: DSC 10°C/min ISO 3146 | |
| Density | 1.15 g/cm3p. 1: Density | ISO 1183test temperature not stated | |
| Water absorption | 3,00 %p. 1: Moisture absorption, 23°C/ 50% r.h. | ISO 62As the sheet prints it: 23°C/ 50% r.h. ISO 62 | |
| Water absorption | 9.5 %p. 1: Water absorption, 23°C/ saturation in water | ISO 62As the sheet prints it: 23°C/ saturation in water ISO 62 | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 85–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 60 °C for ≥ 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 250-280°C; Bed 85-100°C; Drying Drying (if wet) necessary; at least 12h at 60 using a hot dry air ovenSpectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1: Recommended printing settings; p. 1: Drying (if wet) ***; p. 1: Nozzle note; p. 1: settings footnote
- No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
Not in the price sample.
Its 4 documents
What the maker says (7)
- Benefits
chemical resistance to lubricants and oils
Spectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1 - Benefits
The most important characteristics of the Spectrum PA6 Low Warp filament are, among others: resistance to fuel and oils, high impact strength and very good mechanical properties.
Spectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1 - Warping and shrinkage
Spectrum PA6 Low Warp is an extremely durable construction material based on polycaprolactam improved with admixtures to reduce the high shrink-age inherent to the processing of such materials.
Spectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1 - Warping and shrinkage
low processing shrinkage
Spectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1 - Adhesion between layers
a very high adhesion between layers, which minimises the risk of delamination
Spectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1 - Moisture sensitivity
Dry box recommended
Spectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PA6 Low Warpp. 1
SIDDAMENT PAStrength XY, MPa—Modulus XY, GPa—Charpy notched, kJ/m²95IzodHDT 0.45, °C186HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °C—Drying, °C, h802–4 h
SIDDAMENT PASIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PA - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 170 MPaphysically implausiblep. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: physically implausible as published |
| Elongation at break orientation not stated | 10 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3560 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 245 MPaphysically implausiblep. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: physically implausible as published |
| Izod impact strength | 95 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 186 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.2 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.5 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80 °C for 2–4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260-280°C; Bed 90-110°C; Drying If damp, dry at 80°C for 2-4 hours.SIDDAMENT, PA - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PA - Technical Datasheetp. 2
Nanovia PA RailStrength XY, MPa27Modulus XY, GPa3.59Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C90Price, CAD/kg—Nozzle, °C260–280Bed, °C70–80Chamber, °C20Drying, °C, h1006 h
Nanovia PA RailNanovia
Modified: flame-retardant ceramic filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PA Rail : EN 45545-2 : Nanovia9 values | |||
| Tensile modulus XY | 3590 MPap. 1: Young’s modulus (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | not in the median: added filler or additive |
| Tensile modulus orientation not stated | 3280 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 27 MPap. 1: Ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | not in the median: added filler or additive |
| Tensile strain at strength XY | 1.5 %p. 1: Elongation ultimate strength/td | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | listed under other properties |
| Tensile strain at strength orientation not stated | 1.6 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | listed under other properties |
| HDT at 1.8 MPa | 90 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: added filler or additive |
| Continuous service temperature | 120 °Cp. 1: Continuous operational temperature | ISO 3167As the sheet prints it: ISO 3167 A; method=A | |
| Density | 1.49 g/cm3p. 1: Density | ISO 1183 | |
| Surface resistivity | 10^9 Ωp. 1: Surface resistance | IEC 60093 | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 70–80 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- 100 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260 – 280 °C; Bed 70 – 80 °C; Chamber 20 °C; Drying Dehydrate for 6 h at 100 °C prior to printing.Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal); p. 1: Printing
Price
Not in the price sample.
Its 4 documents
What the maker says (13)
- Good for
Certified NF EN 45545-2 for its non-flammable, low smoke and toxic free properties, Nanovia PA Rail is usable in the railway sector.
Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1 - Good for
With an operational temperature of around 120 °C. Nanovia PA Rail is suited for the creation of objects meant of high hazard risk environments.
Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1 - Good for
Protection carter and electronics containers
Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1 - Benefits
This composite polyamide (nylon) filament allows for the creation of components for sensitive environments, resilient up to 100°C, printable without enclosure.
Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1 - Benefits
Easy to print. it does not require an enclosure.
Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1 - Warping and shrinkage
No warping during the printing process
Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1 - Printing advice
Nanovia PA Rail shows better adhesion results on smooth build plates (PEI/glass).
Nanovia, Nanovia PA Rail : EN 45545-2 : Nanoviap. 1 - Pitfalls and limitations
Nanovia PA Rail raw material EN45545-2 Test results
Nanovia, Nanovia PA Rail raw material EN45545-2 Test resultsp. 1: Document title, scope - Pitfalls and limitations
Requirement set : R22, R33
Nanovia, Nanovia PA Rail raw material EN45545-2 Test resultsp. 1: Requirement set declaration - Pitfalls and limitations
R 23
Nanovia, Nanovia PA Rail raw material EN45545-2 Test resultsp. 2: Two requirement-set tables - Pitfalls and limitations
The product is not approved for medical applications.
Nanovia, PA Rail official material safety data sheetp. 2: Section7.2 safe storage/use exclusion - Benefits
Thermoplastic resin EU food contact 2002/72/EC
Nanovia, PA Rail official material safety data sheetp. 1: Section2.1 substance classification, English column - Pitfalls and limitations
Flammable material; Stable. NON-FLAMMABLE.
Nanovia, PA Rail official material safety data sheetp. 2: Section9.2 Other information and Section10.2 Chemical stability, English column
Chemicals and environment (2)
- Organic solvent resistance: described in words
Organic solvents degrade the material.
Nanovia, PA Rail official material safety data sheetp. 2: Section10.3 possible side reactions - UV and outdoor: described in words
Biodegradation and elimination (H2O): the product is inert and can lead some surface degradation under the UV action.
UVNanovia, PA Rail official material safety data sheetp. 3: Section12.2 persistence/degradability, own English column
Spectrum pa6 neat bkStrength XY, MPa78Modulus XY, GPa3.4Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C90Price, CAD/kg163Nozzle, °C250–280Bed, °C60–80Chamber, °C—Drying, °C, h80≥ 12 h
Spectrum pa6 neat bkSpectrum
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, pa6 neat bk10 valuesThe same values also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29. | |||
| Tensile modulus | 3.4 GPap. 1: Modulus of elasticity (dry, at 1 mm/min) | ISO 527As the sheet prints it: ISO 527, dry, 1 mm/min | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 78 MPap. 1: Tensile strength (dry, at 50 mm/min) | ISO 527 | not in the median: added filler or additive |
| Tensile strain at strength orientation not stated | 4,40%transcription correctedp. 1: Elongation at max. force (dry, at 50 mm/min) | ISO 527tested at 23°C | listed under other properties |
| Charpy impact strength | 90 kJ/m2p. 1: Impact strength (dry, 80x10x4mm) | ISO 179As the sheet prints it: ISO 179 1eU | not in the median: unnotched |
| HDT at 1.8 MPa | 90°Cp. 1: Heat distortion temperature (HDT A)also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29 | ISO 75As the sheet prints it: ISO 75 (HDT A) | not in the median: added filler or additive |
| Continuous service temperature | 120°Cp. 1: Continous service temperature (20.000h) | IEC 60216As the sheet prints it: IEC 60216; 20,000 h | |
| Density | 1.25 g/cm3p. 1: Specific gravity | ISO 1183 | |
| Water absorption | <0.3%p. 1: Water absorption, 23°C/24h | ISO 62tested at 23°C | |
| Melt mass-flow rate | 5,5 g/10 minp. 1: Melt flow rate (MFR), 250°C / 2,16kg | ISO 1133As the sheet prints it: ISO 1133; 250 °C, 2.16 kg | |
| Mould shrinkage orientation not stated | 0.3-0.5 %p. 1: Linear mould shrinkage | no standard namedAs the sheet prints it: DIN 16742; MATERIAL PROPERTIES | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80 °C for ≥ 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 250-280°C; Bed 60-80°C; Drying Drying (if wet) necessary; at least 12h at 80 using a hot dry air ovenSpectrum, pa6 neat bkRecommended printing settings; p. 1: Drying (if wet) ***; p. 1: Nozzle note; p. 1: settings footnote
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended
Price
163 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 163 CAD/kgBlack - Spectrum PA6 Neat Filament - 1.75mm, 0.75kg / Default Titlein its price; seen 10 Sep 2026
Its 3 documents
What the maker says (4)
- Benefits
chemical resistance to lubricants and oils
Spectrum, pa6 neat bkp. 1 - Warping and shrinkage
low linear processing shrinkage (0.3%)
Spectrum, pa6 neat bkp. 1 - Moisture sensitivity
Dry box recommended
Spectrum, pa6 neat bkp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, pa6 neat bkp. 1
Spectrum PA6 Neat NTStrength XY, MPa80Modulus XY, GPa3.3Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C90Price, CAD/kg—Nozzle, °C250–280Bed, °C60–80Chamber, °C—Drying, °C, h80≥ 12 h
Spectrum PA6 Neat NTSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PA6 Neat NT10 valuesThe same values also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29. | |||
| Tensile modulus orientation not stated | 3.3 GPap. 1: Modulus of elasticity (dry, at 1 mm/min) | ISO 527As the sheet prints it: dry at 1 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 80 MPap. 1: Tensile strength (dry, at 50 mm/min) | ISO 527As the sheet prints it: dry at 50 mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strain at strength orientation not stated | 4,00 %p. 1: Elongation at max. force (dry, at 50 mm/min) | ISO 527As the sheet prints it: dry at 50 mm/min ISO 527 | listed under other properties |
| Charpy impact strength | 135 kJ/m2p. 1: Impact strength (dry, 80x10x4mm) | ISO 179As the sheet prints it: dry 80x10x4mm ISO 179 | not in the median: unnotched |
| HDT at 1.8 MPa | 90 °Cp. 1: Heat distortion temperature (HDT A)also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29 | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Continuous service temperature | 120 °Cp. 1: Continous service temperature (20.000h) | IEC 60216As the sheet prints it: 20.000h IEC 60216 | |
| Density | 1.14 g/cm3p. 1: Specific gravity | ISO 1183 | |
| Water absorption | 0,3 %p. 1: Water absorption, 23°C/24h | ISO 62As the sheet prints it: 23°C/24h ISO 62 | |
| Melt mass-flow rate | 5.1 g / 10min g/10 minp. 1: Melt flow rate (MFR), 250°C / 2,16kg | ISO 1133As the sheet prints it: ISO 1133; MATERIAL PROPERTIES; 2,16 kg | |
| Mould shrinkage orientation not stated | 0.3-0.5 %p. 1: Linear mould shrinkage | no standard namedAs the sheet prints it: DIN 16742; MATERIAL PROPERTIES | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- optional: 80 °C for ≥ 12 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 250-280°C; Bed 60-80°C; Drying Drying (if wet) necessary; at least 12h at 80 using a hot dry air ovenSpectrum, TECHNICAL DATA SHEET PA6 Neat NTp. 1: Recommended printing settings; p. 1: Drying (if wet) ***; p. 1: Nozzle note; p. 1: settings footnote
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended; p. 25: Adhesive
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
chemical resistance to lubricants and oils
Spectrum, TECHNICAL DATA SHEET PA6 Neat NTp. 1 - Warping and shrinkage
low linear processing shrinkage (0.3%)
Spectrum, TECHNICAL DATA SHEET PA6 Neat NTp. 1 - Moisture sensitivity
Dry box recommended
Spectrum, TECHNICAL DATA SHEET PA6 Neat NTp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PA6 Neat NTp. 1
No product matches "".
Not published by any product: tensile strength (Z).
Values are for the colour each sheet tested; pigment can change them.