PAHT-CF
5 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
5 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- from the Bambu Lab Filament Guide
- hardened nozzle
- not published
How the numbers are worked out
Bambu Lab PAHT-CFStrength XY, MPa92Strength Z, MPa47Modulus XY, GPa3.86Charpy notched, kJ/m²22.8HDT 0.45, °C194HDT 1.8, °C170Price, CAD/kg124Nozzle, °C260–290Bed, °C80–100Chamber, °C45–60Drying, °C, h808–12 h
Bambu Lab PAHT-CFBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CF22 valuesUnless a row says otherwise: printed specimendryDryannealed at 80 °C for 12 hAll the specimens were annealed and dried at 80 °C for 12 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 290 °C Bed Temperature 100 °C Printing Speed 100 mm/s Infill Density 100% * All the specimens were printed at the following settings: Nozzle Temperature = 290 °C, Printing Speed = 100 mm/s, Bed Temperature = 100 °C, Infill Density = 100%. All the specimens were annealed and dried at 80 °C for 12 h before testing. A | |||
| Tensile modulus XY | 3860 ± 230 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2180 ± 130 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 92 ± 7 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 47 ± 5 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 8.4 ± 1.8 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 4.1 ± 1.2 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 4230 ± 210 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1820 ± 170 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 125 ± 7 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 61 ± 5 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 57.5 ± 3.4 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 22.8 ± 1.8 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 13.3 ± 0.8 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 194 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 170 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 70 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 220 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 225 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Crystallization temperature | 140 °Cp. 2: Crystallization Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.06 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.88 %p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: te 25 °C, 55% RH | |
| Melt mass-flow rate | 14.4 ± 2.0 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 280 °C, 2.16 kg | |
| Bambu Lab, PA6-GF official maker product page1 value | |||
| Impact strength, test unclear XY | 62.3 kJ/m²p. 1: Toughness (Impact Strength - XY, wet state) | no standard statedafter moisture conditioningwet state | listed under other properties |
| Bambu Lab, Bambu Lab PAHT-CF safety data sheet1 value | |||
| Fibre content | 12-20 %p. 4: Carbon fiber | no standard stated | |
Print settings
- Nozzle
- 260–290 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- 45–60 °Cown data sheet
- Drying
- 80 °C for 8–12 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
- Annealing
- 80 °C for 12 hown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 260 - 290 °C; Bed 80 - 100 °C; Chamber 45 - 60 °C; Drying Blast Drying Oven: 80 °C, 8 - 12 hBambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFRecommended printing settings
- Drying Dry before Use for the Highest Print Quality; need to be dried at 80 °C for 12 hours before printingBambu Lab, PAHT-CF official maker product pagep. 1: Cautions for Use; p. 1: the note under the specifications (drying)
Price
124 CAD/kgthe median of its 2 regular prices in the sample
4 listings: 2 in its price, 1 with no regular price per kilogram recorded, 1 where a Canadian listing is used instead
- Bambu Lab Canada: 128 CAD/kgPAHT-CF - Black (70100) / Filament with spool / 0.5 kgin its price; seen 10 Sep 2026
- Bambu Lab Canada: 121 per kg, sale pricePAHT-CF - Black (70100) / Filament with spool / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- 3D Printing Canada: 128 CAD/kgBlack - Bambu Lab PAHT-CF Filament - 1.75mm / 0.5 KGnot used: a Canadian listing is used instead; seen 10 Sep 2026
- 3D Printing Canada: 121 CAD/kgBlack - Bambu Lab PAHT-CF Filament - 1.75mm / 1 KGin its price; seen 10 Sep 2026
Its 5 documents
What the maker says (7)
- Good for
Suggested uses are: functional prototypes, machining fixtures, injection molds, jigs, and low-volume production parts.
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFp. 1 - Benefits
Bambu PAHT-CF is a high-temperature engineering-grade carbon-fiber reinforced nylon that is designed for applications where high strength, stiffness, and temperature resistance are required.
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFp. 1 - Adhesion between layers
It is easy to print, has enhanced Z-bonding, a high-degree of dimensional stability, and has been optimized to retain excellent mechanical properties when wet.
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFp. 1 - Supports and removal
Support Material Bambu Support for PA/PET
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFp. 3 - Supports and removal
When printing a model with support, we recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.
Bambu Lab, PAHT-CF official maker product pagep. 1: exact product features/description/application tips, source text line 166 - Pitfalls and limitations
As this filament contains highly hygroscopic wood fibers, please place any unused filament in a sealed container with desiccant immediately, and dry thoroughly before printing.
Bambu Lab, PAHT-CF official maker product pagep. 1: exact product features/description/application tips, source text line 176
Specimen preparation (1)
All the specimens were annealed and dried at 80 °C for 12 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFTest specimen preparation
Chemicals and environment (7)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFFlammability - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PAHT-CF is 80 to 130 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PAHT-CFp. 3: Annealing note
BASF Forward AM Ultrafuse PAHT CF15Strength XY, MPa103Strength Z, MPa18.2Modulus XY, GPa8.39Charpy notched, kJ/m²4.8HDT 0.45, °C145HDT 1.8, °C92Price, CAD/kg—Nozzle, °C260–280Bed, °C100–120Chamber, °CenclosedDrying, °C, h804–16 h
BASF Forward AM Ultrafuse PAHT CF15BASF Forward AM
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary64 valuesThe same values also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15.Unless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 5052 MPap. 5: Young’s Modulus9) ISO 527also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Tensile modulus XY | 4102 MPap. 5: Young’s Modulus conditioned annealed, XY-Direction | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RHannealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: measured after moisture conditioning |
| Tensile modulus XY | 6588 MPap. 5: Young’s Modulus dry annealed, XY-Direction | ISO 527annealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: another value of this product is in it |
| Tensile modulus Z (ZX) | 2455 MPap. 5: Young’s Modulus conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Tensile modulus Z (ZX) | 795 MPap. 5: Young’s Modulus conditioned annealed, ZX-Direction | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RHannealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: measured after moisture conditioning |
| Tensile modulus Z (ZX) | 1320 MPap. 5: Young’s Modulus dry annealed, ZX-Direction | ISO 527annealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 62.9 MPap. 5: Tensile strength conditioned, XY-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 54 MPap. 5: Tensile strength conditioned annealed, XY-Direction | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RHannealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 80,5 MPap. 5: Tensile strength dry annealed, XY-Direction | ISO 527annealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) Z (ZX) | 19.1 MPap. 5: Tensile strength conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) Z (ZX) | 7.9 MPap. 5: Tensile strength conditioned annealed, ZX-Direction | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RHannealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) Z (ZX) | 8,14 MPap. 5: Tensile strength dry annealed, ZX-Direction | ISO 527annealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: another value of this product is in it |
| Elongation at break XY | 2.9 %p. 5: Elongation at Break11) ISO 527also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Elongation at break XY | 2,9 %p. 5: Elongation at Break conditioned annealed, XY-Direction | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RHannealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: measured after moisture conditioning |
| Elongation at break XY | 1,7 %p. 5: Elongation at Break dry annealed, XY-Direction | ISO 527annealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: another value of this product is in it |
| Elongation at break Z (ZX) | 0.8 %p. 5: Elongation at Break conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Elongation at break Z (ZX) | 1.8 %p. 5: Elongation at Break conditioned annealed, ZX-Direction | ISO 527after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RHannealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: measured after moisture conditioning |
| Elongation at break Z (ZX) | 0,8 %p. 5: Elongation at Break dry annealed, ZX-Direction | ISO 527annealed at 90 °C for 2 hannealed at 90 °C for 120 min (heated from room temperature over ~60 min, cooled over ~180 min) | not in the median: another value of this product is in it |
| Flexural modulus XY | 6063 MPap. 6: Flexural Modulus ISO 178also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Flexural modulus XZ | 6260 MPap. 6: Flexural Modulus conditioned, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Flexural modulus ZX | 2190 MPap. 6: Flexural Modulus conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Flexural modulus XZ | 7669 MPap. 6: Flexural Modulus dry, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 2715 MPap. 6: Flexural Modulus dry, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 125.1 MPap. 6: Flexural Strength conditioned, XY-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Flexural strength ZX | 50.8 MPap. 6: Flexural Strength dry7) ISO 178also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XZ | 121.9 MPap. 6: Flexural Strength conditioned, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Flexural strength ZX | 56.0 MPap. 6: Flexural Strength conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Flexural strength XZ | 171.8 MPap. 6: Flexural Strength dry, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural elongation at break XY | 2.4 %p. 6: Flexural Elongation at Break ISO 178also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178drySamples were dried at 80°C vacuum until weight constancy | listed under other properties |
| Flexural elongation at break XZ | 3.6 %p. 6: Flexural Elongation at Break ISO 178 No breakalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | listed under other properties |
| Flexural elongation at break ZX | 4.0 %p. 6: Flexural Elongation at Break conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | listed under other properties |
| Flexural elongation at break XZ | 2.8 %p. 6: Flexural Elongation at Break dry, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178 | listed under other properties |
| Flexural elongation at break ZX | 1.8 %p. 6: Flexural Elongation at Break dry, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 178 | listed under other properties |
| Charpy impact strength XY | 5.1 kJ/m2p. 6: Impact Strength Charpy ISO 179-2also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2after moisture conditioningConditioned (the row's own label, "(notched) conditioned", footnote 6) | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 21.9 kJ/m2p. 6: Impact Strength Charpy (unnotched) conditioned, XY-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 20.6 kJ/m2p. 6: Impact Strength Charpy (unnotched) dry, XY-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Charpy impact strength XZ | 5.3 kJ/m2p. 6: Impact Strength Charpy (notched) conditioned, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Charpy impact strength ZX | 1.6 kJ/m2p. 6: Impact Strength Charpy (notched) conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Charpy impact strength XZ | 3.9 kJ/m2p. 6: Impact Strength Charpy (notched) dry, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength ZX | 1.3 kJ/m2p. 6: Impact Strength Charpy (notched) dry, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XZ | 20.4 kJ/m2p. 6: Impact Strength Charpy (unnotched) conditioned, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Charpy impact strength ZX | 2.8 kJ/m2p. 6: Impact Strength Charpy (unnotched) conditioned, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: measured after moisture conditioning |
| Charpy impact strength XZ | 19.3 kJ/m2p. 6: Impact Strength Charpy (unnotched) dry, XZ-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Charpy impact strength ZX | 2.9 kJ/m2p. 6: Impact Strength Charpy (unnotched) dry, ZX-Directionalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 179As the sheet prints it: ISO 179-2 | not in the median: unnotched |
| Izod impact strength XY | 6.5 J/mphysically implausiblep. 6: Impact Strength Izod (notched) conditioned, XY-Direction | ISO 180after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: in J/m |
| Izod impact strength XY | 4.9 J/mphysically implausiblep. 6: Impact Strength Izod (notched) dry, XY-Direction | ISO 180 | not in the median: in J/m |
| Izod impact strength XY | 16.3 J/mphysically implausiblep. 6: Impact Strength Izod (unnotched) conditioned, XY-Direction | ISO 180after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: in J/m |
| Izod impact strength XY | 16.4 J/mphysically implausiblep. 6: Impact Strength Izod (unnotched) dry, XY-Direction | ISO 180 | not in the median: in J/m |
| Izod impact strength XZ | 5.8 J/mphysically implausiblep. 6: Impact Strength Izod (notched) conditioned, XZ-Direction | ISO 180after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: in J/m |
| Izod impact strength XZ | 5.1 J/mphysically implausiblep. 6: Impact Strength Izod (notched) dry, XZ-Direction | ISO 180 | not in the median: in J/m |
| Izod impact strength XZ | 15.1 J/mphysically implausiblep. 6: Impact Strength Izod (unnotched) conditioned, XZ-Direction | ISO 180after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: in J/m |
| Izod impact strength ZX | 4.1 J/mphysically implausiblep. 6: Impact Strength Izod (unnotched) conditioned, ZX-Direction | ISO 180after moisture conditioningSamples were conditioned in 336h at 70°C / 62% RH | not in the median: in J/m |
| Izod impact strength XZ | 18.1 J/mphysically implausiblep. 6: Impact Strength Izod (unnotched) dry, XZ-Direction | ISO 180 | not in the median: in J/m |
| Izod impact strength ZX | 2.9 J/mphysically implausiblep. 6: Impact Strength Izod (unnotched) dry, ZX-Direction | ISO 180 | not in the median: in J/m |
| Hardness | 72 Shore Dp. 7: Shore Hardness D (15s) DIN ISO 7619-1 | ISO 7619As the sheet prints it: 15s DIN ISO 7619-1 | in the median |
| HDT at 0.45 MPa | 128 °Cp. 7: HDT B at 0.45 MPa ISO 75-2 | ISO 75As the sheet prints it: 0.45 MPa ISO 75-2after moisture conditioningConditioned | not in the median: measured after moisture conditioning |
| HDT at 1.8 MPa | 91 °Cp. 7: HDT A at 1.8 MPa ISO 75-2 | ISO 75As the sheet prints it: 1.8 MPa ISO 75-2after moisture conditioningConditioned | not in the median: measured after moisture conditioning |
| Glass transition temperature | 70 °Cp. 7: Glass Transition ISO 11357-2also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 192 °Cp. 7: Vicat softening point at 50 N ISO 306 | ISO 306As the sheet prints it: 50 N ISO 306after moisture conditioningConditioned | |
| Vicat softening temperature | 217 °Cp. 7: Vicat softening point at 10 N ISO 306 | ISO 306As the sheet prints it: 10 N ISO 306after moisture conditioningConditioned | |
| Melting temperature | 234 °Cp. 7: Melting Temperature ISO 11357-3also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Crystallization temperature | 180 °Cp. 7: Crystallization Temperature ISO 11357-3also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1203 kg/m³p. 4: Filament Densityalso in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | Filament, ISO 1183As the sheet prints it: ISO 1183-1 | |
| Melt volume-flow rate | 42.2 cm3/10 minp. 7: Melt Volume-Flow Rate ISO 1133also in BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15 | specimen not stated, ISO 1133 | |
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF1527 valuesThe same values also in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary.Unless a row says otherwise: printed specimendryDryprint settingsPrinted on a DDdrop FFF printer at 285 °C nozzle, 110 °C bed on glass, nozzle diameter >= 0.6 mm, 45 mm/s (p. 2: Recommended 3D-Print processing parameters, the "Used for test specimens" column) | |||
| Tensile modulus XY | 8386 MPap. 4: Young's Modulus, print direction XY Flatalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 527As the sheet prints it: ISO 527 (testing speed 1 mm/min) | in the median |
| Tensile modulus Z (ZX) | 3532 MPap. 4: Young's Modulus, print direction ZX Uprightalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 527As the sheet prints it: ISO 527 (testing speed 1 mm/min) | in the median |
| Tensile strength (yield or break not stated) XY | 103.2 MPap. 4: Tensile strength, print direction XY Flatalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 527As the sheet prints it: ISO 527 (testing speed 5 mm/min) | in the median |
| Tensile strength (yield or break not stated) Z (ZX) | 18.2 MPap. 4: Tensile strength, print direction ZX Uprightalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 527As the sheet prints it: ISO 527 (testing speed 5 mm/min) | in the median |
| Elongation at break XY | 1.8 %p. 4: Elongation at Break, print direction XY Flatalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 527As the sheet prints it: ISO 527 (testing speed 5 mm/min) | in the median |
| Elongation at break Z (ZX) | 0.5 %p. 4: Elongation at Break, print direction ZX Uprightalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 527As the sheet prints it: ISO 527 (testing speed 5 mm/min) | in the median |
| Flexural modulus XY | 8258 MPap. 4: Flexural Modulus, print direction XY Flatalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 178As the sheet prints it: ISO 178 (testing speed 2 mm/min) | in the median |
| Flexural strength XY | 160.7 MPap. 4: Flexural Strength, print direction XY Flatalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 178As the sheet prints it: ISO 178 (testing speed 2 mm/min) | in the median |
| Flexural elongation at break XY | No break %p. 5: Flexural Elongation at Break, print direction XY Flat | ISO 178As the sheet prints it: ISO 178 (testing speed 2 mm/min)after moisture conditioningConditioned: standard climate (23 °C, 50% RH, 72 h) | not in the median: no number given |
| Charpy impact strength XY | 4.8 kJ/m2 kJ/m²p. 4: Impact Strength Charpy (notched), print direction XY Flatalso in BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summary | ISO 179As the sheet prints it: ISO 179-2 | in the median |
| Izod impact strength XY | 4.9 kJ/m2 kJ/m²p. 4: Impact Strength Izod (notched), print direction XY Flat | ISO 180 | in the median |
| Izod impact strength XY | 16.4 kJ/m2 kJ/m²p. 4: Impact Strength Izod (unnotched), print direction XY Flat | ISO 180 | not in the median: unnotched |
| Izod impact strength XY | 6.5 kJ/m2 kJ/m²p. 5: Impact Strength Izod (notched), print direction XY Flat | ISO 180after moisture conditioningConditioned: standard climate (23 °C, 50% RH, 72 h) | not in the median: measured after moisture conditioning |
| Izod impact strength XY | 16.3 kJ/m2 kJ/m²p. 5: Impact Strength Izod (unnotched), print direction XY Flat | ISO 180after moisture conditioningConditioned: standard climate (23 °C, 50% RH, 72 h) | not in the median: measured after moisture conditioning |
| Izod impact strength XZ | 5.1 kJ/m2 kJ/m²p. 4: Impact Strength Izod (notched), print direction XZ On its edge | ISO 180 | not in the median: measured on a bar in another orientation |
| Izod impact strength XZ | 18.1 kJ/m2 kJ/m²p. 4: Impact Strength Izod (unnotched), print direction XZ On its edge | ISO 180 | not in the median: unnotched |
| Izod impact strength ZX | 2.9 kJ/m2 kJ/m²p. 4: Impact Strength Izod (unnotched), print direction ZX Upright | ISO 180 | not in the median: unnotched |
| Izod impact strength XZ | 5.8 kJ/m2 kJ/m²p. 5: Impact Strength Izod (notched), print direction XZ On its edge | ISO 180after moisture conditioningConditioned: standard climate (23 °C, 50% RH, 72 h) | not in the median: measured after moisture conditioning |
| Izod impact strength XZ | 15.1 kJ/m2 kJ/m²p. 5: Impact Strength Izod (unnotched), print direction XZ On its edge | ISO 180after moisture conditioningConditioned: standard climate (23 °C, 50% RH, 72 h) | not in the median: measured after moisture conditioning |
| Izod impact strength ZX | 4.1 kJ/m2 kJ/m²p. 5: Impact Strength Izod (unnotched), print direction ZX Upright | ISO 180after moisture conditioningConditioned: standard climate (23 °C, 50% RH, 72 h) | not in the median: measured after moisture conditioning |
| Hardness | 72p. 3: Shore Hardness D, 15s / A, 30s | specimen not stated, ISO 7619As the sheet prints it: ISO 7619-1 | listed under other properties |
| Poisson's ratio | 0,44p. 3: Poisson-Number (dry) | specimen not stated, ISO 527print settings not stated | |
| HDT at 0.45 MPa | 145 °Cp. 3: HDT at 0.45 MPa (dry) | ISO 75As the sheet prints it: ISO 75-2, 0.45 MPa | in the median |
| HDT at 1.8 MPa | 92 °Cp. 3: HDT at 1.8 MPa (dry) | ISO 75As the sheet prints it: ISO 75-2, 1.8 MPa | in the median |
| Vicat softening temperature | 205 °Cp. 3: Vicat softening point @ 50 N (dry) | ISO 306As the sheet prints it: ISO 306 (50 N) | |
| Vicat softening temperature | 221 °Cp. 3: Vicat softening point @ 10 N (dry) | ISO 306As the sheet prints it: ISO 306 (10 N) | |
| Fibre content | 15% carbon fibersp. 1: Fibre content | specimen not stated, no standard statedmoisture state not statedprint settings not stated | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- 80 °C for 4–16 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- 90 °C for 2 hown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 260 – 280 °C; Bed 100 – 120 °C; Drying 80 °C in a hot air dryer or vacuum oven for at least 4 to 16 hoursBASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summaryp. 3: Recommended printing settings; p. 4: Drying recommendations; p. 3: Bed Material
- Nozzle 260 – 280 °C / 500 – 536 °F; Bed 100 – 120 °C / 212 – 248 °F; Drying 80 °C in a hot air dryer or vacuum oven for at least 4 to 16 hours.BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1: Product Description; p. 2: Bed Material; p. 2: Nozzle Diameter; p. 2: Drying recommendations; p. 2: Recommended 3D-Print processing parameters: Nozzle Temperature; Bed Temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (19)
- Benefits
strong | chemical resistant | ESD safe
BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summaryp. 1 - Benefits
Advanced heat resistant material with very good processability and ESD properties.
BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summaryp. 3 - Nozzle wear
Nozzle Diameter ≥ 0,6 mm, hardened
BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summaryp. 3 - Precision and tolerance
The annealing process can lead to a minor deviation in the dimensional accuracy.
BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summaryp. 4 - Supports and removal
Support material Single material breakaway, Ultrafuse BVOH
BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summaryp. 4 - Printing advice
Fix larger parts to avoid potential deformation during the annealing process.
BASF Forward AM, Ultrafuse PAHT CF15 Extended TDS: Complete Technical Documentation and Testing Summaryp. 4 - Good for
Ultrafuse® PAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Benefits
In parallel to its advanced mechanical properties, dimensional stability, and chemical resistance, it has very good processability.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Nozzle wear
It works in any FFF printer with a hardened nozzle.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Supports and removal
In addition to that, it is compatible with water-soluble support material and HiPS, which allow printing complex geometries that work in challenging environments.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Benefits
Ultrafuse® PAHT CF15 offers high temperature resistance, low moisture absorption
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Moisture sensitivity
Ultrafuse® PAHT CF15 filament should be stored at 15 - 25°C in its originally sealed package in a clean and dry environment.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Moisture sensitivity
If the recommended storage conditions are observed the products will have a minimum shelf life of 12 months.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Odour and emissions
Recommended: Process materials in a well ventilated room, or use professional extraction systems.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 1 - Moisture sensitivity
80 °C in a hot air dryer or vacuum oven for at least 4 to 16 hours.
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 2 - Printing advice
Bed Material PEI or Glass
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 2 - Nozzle wear
Nozzle Diameter ≥ 0,6 mm, Ruby or hardened
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 2 - Supports and removal
Support material compatibility Single material breakaway, Ultrafuse® BVOH, Ultrafuse® HIPS
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 2 - Printing advice
Print Speed 30 - 80 mm/s
BASF Forward AM, Technical Data Sheet for Ultrafuse PAHT CF15p. 2
iSANMATE PAHT CFStrength XY, MPa123Strength Z, MPa37.9Modulus XY, GPa8.62Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C280–310Bed, °C100–120Chamber, °CenclosedDrying, °C, h808–12 h
iSANMATE PAHT CFiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PAHT CF Filament Technical Data Sheet10 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 8620 MPap. 1: Elastic modulus (XY) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2750 MPap. 1: Elastic modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 123.17 MPap. 1: Tensile Strength (XY) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 37.9 MPap. 1: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 1.98 %p. 1: Elongation At Break (XY) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 1.6 %p. 1: Elongation At Break (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 8790 MPap. 1: Flexural modulus (XY) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2820 MPap. 1: Flexural modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural strength XY | 193.24 MPap. 1: Flexural strength (XY) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 72.66 MPap. 1: Flexural strength (Z) | ISO 527, GB/T 1040 | in the median |
Print settings
- Nozzle
- 280–310 °Cown data sheet
- Bed
- 100–120 °CBambu Lab Filament Guide
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- 80 °C for 8–12 hBambu Lab Filament Guide
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 280°C to 310°CiSANMATE, PAHT CF Filament Technical Data Sheetp. 1: Wide compatibility; p. 1: Wide compatibility
Price
Not in the price sample.
Its 2 documents
What the maker says (7)
- Good for
ideal for high-performance engineering and replacing automotive parts.
iSANMATE, PAHT CF Filament Technical Data Sheetp. 1 - Benefits
Quasi-metallic strength: Surpasses ordinary PA6-CF
iSANMATE, PAHT CF Filament Technical Data Sheetp. 1 - Benefits
Ultra-high temperature resistance: Withstands 227°C without losing structural integrity, suitable for extreme environments.
iSANMATE, PAHT CF Filament Technical Data Sheetp. 1 - Warping and shrinkage
excellent anti-warping for large-size printing.
iSANMATE, PAHT CF Filament Technical Data Sheetp. 1 - Precision and tolerance
Industrial-grade accuracy: Ensures prototypes match drawings
iSANMATE, PAHT CF Filament Technical Data Sheetp. 1 - Moisture sensitivity
Humidity stability: Performs well in humid conditions, maintaining stiffness and thermal properties.
iSANMATE, PAHT CF Filament Technical Data Sheetp. 1 - Nozzle wear
Wide compatibility: Compatible with printers like P1S, X1C, and X1E, requiring a sealed box and hardened steel nozzle at 280°C to 310°C.
iSANMATE, PAHT CF Filament Technical Data Sheetp. 1
LEHVOSS LUVOCOM 3F PA CF 9742 BKStrength XY, MPa170Strength Z, MPa—Modulus XY, GPa15Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C200Price, CAD/kg—Nozzle, °C265–290Bed, °C≥ 50Chamber, °CenclosedDrying, °C, h1306–8 h
LEHVOSS LUVOCOM 3F PA CF 9742 BKLEHVOSS
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, LUVOCOM 3F PAHT® CF 9742 BK11 values | |||
| Tensile modulus orientation not stated | 15 GPap. 1: Tensile modulus GPa | ISO 527, ISO 3167dry | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 170 MPap. 1: Tensile strength MPa | ISO 527, ISO 3167dry | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 1 %p. 1: Elongation @Fmax. | ISO 527, ISO 3167As the sheet prints it: ISO 527; rate=50 mm/min; specimen=ISO 3167 A; humidity=50% rh | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strain at strength orientation not stated | 1 %p. 1: Elongation @Fmax. % | ISO 527, ISO 3167dry | listed under other properties |
| Charpy impact strength | 47 kJ/m²p. 1: Impact strength kJ/m² | ISO 179dry | not in the median: notch not stated |
| HDT at 1.8 MPa | 200 °Cp. 1: Heat distortion temp. HDT A ISO 75 80x10x4mm °C | ISO 75As the sheet prints it: HDT A 80x10x4mm ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Continuous service temperature | 150 °Cp. 1: Continuous service temp. | IEC 60216, ISO 3167As the sheet prints it: IEC 60216; time=20.000 h; specimen=ISO 3167 A | |
| Density | 1,25 g/cm³p. 1: Specific gravity ISO 1183-3 g/cm³ | ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0,3 %p. 1: Water absorption 23°C / 24h ISO 62 ISO 3167 A % | ISO 62, ISO 3167As the sheet prints it: 23°C / 24h A ISO 62 ISO 3167 | |
| Mould shrinkage orientation not stated | 0,00-0,1 %p. 1: Linear mould shrinkage | ISO 3167As the sheet prints it: DIN 16742; specimen=ISO 3167 A | |
| Surface resistivity | 10² Ωp. 1: Surface resistance Ω | no standard stated | |
| LEHVOSS, LUVOCOM-3F | LEHVOSS Compounds1 value | |||
| Fibre content | 15 %p. 1: carbon fibers | no standard stated | |
Print settings
- Nozzle
- 265–290 °Cown data sheet
- Bed
- at least 50 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- 130 °C for 6–8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 265 - 290 °C; Bed > 50 °C; Drying 130 °C, 6 - 8 h3D4Makers, LUVOCOM 3F PAHT® CF 9742 BKp. 2: Recommended printing settings; p. 2: General: nozzle material; p. 2: Dehumidifying dryer
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
Easy to print.
3D4Makers, LUVOCOM 3F PAHT® CF 9742 BKp. 1 - Warping and shrinkage
No warping.
3D4Makers, LUVOCOM 3F PAHT® CF 9742 BKp. 1 - Adhesion between layers
High z-strength.
3D4Makers, LUVOCOM 3F PAHT® CF 9742 BKp. 1 - Nozzle wear
nozzle material: abbrasion resistant
3D4Makers, LUVOCOM 3F PAHT® CF 9742 BKp. 2
LEHVOSS LUVOCOM 3F PAHT CF 9891 BKStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C265–290Bed, °C≥ 50Chamber, °CenclosedDrying, °C, h1204–6 h
LEHVOSS LUVOCOM 3F PAHT CF 9891 BKLEHVOSS
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PAHT CF 9891 BK12 values | |||
| Tensile modulus orientation not stated | 10,5 GPap. 1: Modulus of elasticity dry, @1 mm/min ISO 527 MPTS ISO 3167 A GPa | ISO 527, ISO 3167As the sheet prints it: 1 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) orientation not stated | 120 MPap. 1: Tensile strength dry, @50 mm/min ISO 527 MPTS ISO 3167 A MPa | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strain at strength orientation not stated | 2 %p. 1: Elongation at maximum force dry, @50 mm/min ISO 527 MPTS ISO 3167 A % | ISO 527, ISO 3167As the sheet prints it: 50 mm/min MPTS A ISO 527 ISO 3167 | listed under other properties |
| Charpy impact strength | 35 kJ/m²p. 1: Charpy impact strength dry ISO 179 1eU 80x10x4mm kJ/m² | ISO 179As the sheet prints it: 1eU 80x10x4mm ISO 179 | not in the median: unnotched |
| HDT at 1.8 MPa | 90 °Cp. 1: Heat distortion temperature HDT A ISO 75 molded sample °C | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Melting temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Melt temperature °C | no standard stated | |
| Continuous service temperature | 120 °Cp. 1: Continuous service temperature 20.000 h IEC 60216 MPTS ISO 3167 A °C | IEC 60216, ISO 3167As the sheet prints it: 20.000 h MPTS A IEC 60216 ISO 3167 | |
| Density | 1,24 g/cm³p. 1: Specific gravity ISO 1183-3 g/cm³ | ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0,3 %p. 1: Water absorption 23°C / 24h ISO 62 MPTS ISO 3167 A % | ISO 62, ISO 3167As the sheet prints it: 23°C / 24h MPTS A ISO 62 ISO 3167 | |
| Melt mass-flow rate | 4 g/10 minp. 1: Melt flow rates (MFR) 250°C / 2,16kg ISO 1133 pellet g/10 min | ISO 1133As the sheet prints it: MFR 250°C / 2 16kg pellet ISO 1133 | |
| Melt volume-flow rate | 3 cm³/10 minp. 1: Melt volume rate (MVR) 250°C / 2,16kg ISO 1133 pellet cm³/10 min | ISO 1133As the sheet prints it: MVR 250°C / 2 16kg pellet ISO 1133 | |
| Surface resistivity | 10² Ωp. 1: Surface resistance ROB DIN IEC 60093 Ronde 60x4mm Ω | IEC 60093As the sheet prints it: 60x4mm IEC 60093 | |
| LEHVOSS, LUVOCOM-3F | LEHVOSS Compounds1 value | |||
| Fibre content | 15 %p. 1: carbon fibers | no standard stated | |
Print settings
- Nozzle
- 265–290 °Cown data sheet
- Bed
- at least 50 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureBambu Lab Filament Guide
- Drying
- 120 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 265 - 290 °C; Bed > 50 °C; Drying 120 °C, 4 - 6 hLEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PAHT CF 9891 BKp. 2: Recommended printing settings; p. 2: Vacuum Dryer; p. 2: Nozzle; p. 2: General: nozzle material
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Moisture sensitivity
Low influence from moisture and temperature on dimensional stability and electrical properties, compared with PA66
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PAHT CF 9891 BKp. 1 - Nozzle wear
nozzle material: abbrasion resistant
LEHVOSS, PRELIMINARY DATASHEET LUVOCOM 3F PAHT CF 9891 BKp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.