PC FR
3 products from 3 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
3 products
Key
- measured after annealing
- from the Bambu Lab Filament Guide
- not published
How the numbers are worked out
Bambu Lab PC FRStrength XY, MPa60Strength Z, MPa21Modulus XY, GPa1.67Charpy notched, kJ/m²8.4HDT 0.45, °C113HDT 1.8, °C108Price, CAD/kg70Nozzle, °C260–280Bed, °C90–110Chamber, °C45–60Drying, °C, h808 h
Bambu Lab PC FRBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PC FR21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)annealed at 80 °C for 12 hAll the specimens were annealed and dried at 80 °C for 12 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 270 °C Bed Temperature 100 °C Printing Speed 100 mm/s InfillDensity 100% *All the specimens were printed at the following settings: Nozzle Temperature = 270 °C, Printing Speed = 100 mm/s, Bed Temperature = 100 °C,InfillDensity =100%. Allthe specimens were annealed and dried at 80 °C for 12 h before testing.And the | |||
| Tensile modulus XY | 1670 ± 40 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1450 ± 60 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 60 ± 4 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 21 ± 3 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 2.4 ± 0.3 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 1.5 ± 0.4 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 1890 ± 70 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1660 ± 80 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 90 ± 4 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 47 ± 2 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 55 ± 2.1 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 8.4 ± 1.3 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 8.0 ± 0.4 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 113 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 108 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 145 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 114 °Cp. 2: Vicat Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 225 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.18 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.12 %p. 2: Saturated Water | no standard namedAs the sheet prints it: ter Absorption Rate 25 °C, 55% RH | |
| Melt mass-flow rate | 26.4 ± 2.7 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 260 °C, 2.16 kg | |
| Also named without a value: crystallization temperature. | |||
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- 45–60 °Cown data sheet
- Drying
- 80 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- 80 °C for 12 hown data sheet
Its print profile, in the documents' words
- Nozzle 260 - 280 °C; Bed 90 -110°C; Chamber 45 - 60 °C; Drying 80°C, 8hBambu Lab, Bambu Filament Technical Data Sheet - PC FRRecommended printing settings
Price
70 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 70 CAD/kgPC FR - Black (63100) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
- 3D Printing Canada: 70 per kg, sale priceBlack - Bambu Lab PC-FR Filament - 1.75mm, 1kg / Filament with spoolnot used: no regular price per kilogram recorded; seen 10 Sep 2026
Its 4 documents
What the maker says (5)
- Good for
With outstanding durability, Bambu PC FR excels across a wide range of professional applications, including industrial components, protective casings, and high-temperature environments in sectors like automotive, electronics, and manufacturing.
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRp. 1 - Benefits
Bambu PC FR is a high-performance polycarbonate engineered for demanding applications requiring superior flame retardancy, impact resistance, and heat stability.
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRp. 1 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRp. 3 - Good for
Bambu PC FR is an engineering-grade material with toughness comparable to PAHT-CF. Its exceptional stiffness and strength make it a top choice for structural components and protective casings.
Bambu Lab, PC FR official maker product pagep. 1: exact product features/description/application tips, source text line 101 - Pitfalls and limitations
Tested to meet the UL 94-2023 V-0 standard, the top level of flame resistance for 3D printing filament, Bambu PC FR is engineered to prevent or slow flame propagation with exceptional self-extinguishing properties. Ideal for critical applications in electronics, automotive, and mechanical engineering. * UL 94 is a plastics flammability standard established by Underwriters Laboratories (USA). V-0—the highest UL 94 V rating—indicates that burning stops within 10 seconds on a vertically positioned specimen, with dripping particles allowed as long as they are not ignited.
Bambu Lab, PC FR official maker product pagep. 1: exact product features/description/application tips, source text line 99
Chemicals and environment (8)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRResistance to Oil and Grease - Flammability: described in words
Flame retardant
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRFlammability - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PC FR is 85 to 100 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PC FRp. 3: Annealing note - Flammability: described in words
Conclusion: This sample test results comply with the requirements of UL 94-2023 V-0.
Centre Testing International Group Co., Ltd., CTI A2240623890101 Bambu PC FR vertical burning reportpp. 1–5: sample identity p.1/2; protocol p.3; room/aged results p.4/5; conclusion and scope p.5
Polymaker PolyMax PC FRStrength XY, MPa67Strength Z, MPa46Modulus XY, GPa2.63Charpy notched, kJ/m²11.7HDT 0.45, °C110HDT 1.8, °C107Price, CAD/kg—Nozzle, °C250–270Bed, °C90–105Chamber, °C70–100Drying, °C, h756 h
Polymaker PolyMax PC FRPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, PolyMax PC-FR Technical Data Sheet16 valuesThe same values also in Polymaker, PolyMax™ PC-FR Technical Data Sheet.Unless a row says otherwise: printed specimenas printedAll specimens were conditioned at room temperature for 24 h prior to testingprint settingsPrinted at 270 °C nozzle, 105 °C bed, 2 shells, 4 top and bottom layers, 100% infill, 90 ˚C environmental temperature, cooling fan off (p. 6: how to make specimens) | |||
| Tensile modulus XY | 2634 ± 182 MPap. 4: Young's modulus (X-Y)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Tensile modulus Z | 2743 ± 72 MPap. 4: Young's modulus (Z)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Tensile strength (yield or break not stated) XY | 67 ± 4.5 MPap. 4: Tensile strength (X-Y)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Tensile strength (yield or break not stated) Z | 46 ± 4.8 MPap. 4: Tensile strength (Z)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Elongation at break XY | 3.49 ± 0.7 %p. 4: Elongation at break (X-Y)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Elongation at break Z | 2.2 ± 0.3 %p. 4: Elongation at break (Z)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Flexural modulus XY | 2518 ± 53 M P ap. 4: Bending modulus (X-Y)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Flexural strength XY | 96.6 ± 1.3 M P ap. 4: Bending strength (X-Y)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Charpy impact strength XY | 11.7 ± 1.6 kJ /m2p. 4: Charpy impact strength (X-Y)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 179, GB/T 1043moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Charpy impact strength XY | 7.5 ± 1.6 kJ /m2p. 4: Low temperature impact strength (X-Y)also in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 179As the sheet prints it: ISO 179-1/1eA:2010, -30°CmoistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: tested below room temperature |
| HDT at 0.45 MPa | 110 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: ISO 75 0.45MPa | in the median |
| HDT at 1.8 MPa | 107 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: ISO 75 1.8MPa | in the median |
| Vicat softening temperature | 116 °Cp. 3: Vicat softening temperaturealso in Polymaker, PolyMax™ PC-FR Technical Data Sheet | ISO 306, GB/T 1633 | |
| Density | 1.2 g/cm3p. 2: Densityalso in Polymaker, PolyMax™ PC-FR Technical Data Sheet | specimen not stated, ISO 1183, GB/T 1033tested at 23 °Ctreatment not statedprint settings not stated | |
| Water absorption | 0.22 %p. 2: Equilibrium water absorptionalso in Polymaker, PolyMax™ PC-FR Technical Data Sheet | specimen not stated, no standard statedtreatment not statedprint settings not stated | |
| Melt mass-flow rate | 12 - 17 g/10minp. 2: Melt indexalso in Polymaker, PolyMax™ PC-FR Technical Data Sheet | specimen not stated, no standard namedAs the sheet prints it: 260°C, 5 kg | |
| Polymaker, PolyMax™ PC-FR Technical Data Sheet1 valueThe same values also in Polymaker, PolyMax PC-FR Technical Data Sheet. | |||
| Glass transition temperature | 115 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in Polymaker, PolyMax PC-FR Technical Data Sheet | DSC | in the median |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 90–105 °Cown data sheet
- Heated chamber
- 70–100 °Cown data sheet
- Drying
- 75 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 250-270°C; Bed 90-105°C; Chamber Needed (70°C-100°C); Drying 75°C/6HPolymaker, PolyMax™ PC-FR Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Closure chamber; p. 1: Drying temp. and time; p. 1: Enclosure note
- Nozzle 250 – 270 (℃); Bed 90 - 105 (˚C); Chamber 90-100 (˚C)Polymaker, PolyMax PC-FR Technical Data Sheetp. 4: Build plate temperature, Environmental temperature, Enclosure note, Nozzle temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (12)
- Good for
This filament opens new applications in the automotive, railway and aerospace industries.
Polymaker, PolyMax™ PC-FR Technical Data Sheetp. 1 - Benefits
PolyMax™ PC-FR, creation from Covestro’s Makrolon® family, could achieve V0 performance in the UL94 flame retardancy test and displays excellent toughness, strength and heat resistance.
Polymaker, PolyMax™ PC-FR Technical Data Sheetp. 1 - Moisture sensitivity
It is highly recommended to use the PolyBox™ or PolyDryer™ Box when printing or storing.
Polymaker, PolyMax™ PC-FR Technical Data Sheetp. 1 - Printing advice
For large part, it is recommended to use a heated chamber.
Polymaker, PolyMax™ PC-FR Technical Data Sheetp. 1 - Printing advice
It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Polymaker, PolyMax™ PC-FR Technical Data Sheetp. 1 - Printing advice
When printing with PolyMax™ PC-FR, it is recommended to use an enclosure.
Polymaker, PolyMax™ PC-FR Technical Data Sheetp. 1 - Good for
This filament opens new applications in the automotive, railway and aerospace industries.
Polymaker, PolyMax PC-FR Technical Data Sheetp. 2 - Benefits
PolyMax™ PC-FR, creation from Covestro’s Makrolon® family, could achieve V0 performance in the UL94 flame retardancy test and displays excellent toughness, strength and heat resistance.
Polymaker, PolyMax PC-FR Technical Data Sheetp. 2 - Supports and removal
Recommended support material PolyDissolve™ S2
Polymaker, PolyMax PC-FR Technical Data Sheetp. 4 - Printing advice
For large part, it is recommended to use a heated chamber.
Polymaker, PolyMax PC-FR Technical Data Sheetp. 4 - Printing advice
It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Polymaker, PolyMax PC-FR Technical Data Sheetp. 4 - Printing advice
When printing with PolyMax™ PC-FR, it is recommended to use an enclosure.
Polymaker, PolyMax PC-FR Technical Data Sheetp. 4
Chemicals and environment (6)
- Post-processing: described in words
Annealing setting 90°C/2H
Polymaker, PolyMax™ PC-FR Technical Data Sheetp. 1: Annealing setting - Post-processing: described in words
Annealing settings: 90˚C for 2h
Polymaker, PolyMax PC-FR Technical Data Sheetp. 4: Annealing note - Acid resistance: limited
Slight resistant
Effect of weak acids · weakPolymaker, PolyMax PC-FR Technical Data Sheetp. 2: Effect of weak acids Slight resistant - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, PolyMax PC-FR Technical Data Sheetp. 2: Effect of strong acids Not resistant - Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, PolyMax™ PC-FR Technical Data Sheetp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, PolyMax™ PC-FR Technical Data Sheetp. 1: Effect of strong acids Poor
Extrudr DURAPRO PC FR V0Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–290Bed, °C110Chamber, °CenclosedDrying, °C, h808 h
Extrudr DURAPRO PC FR V0Extrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET DURAPRO PC FR V017 valuesThe same values also in Extrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V0.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 2650 MPap. 1: Tensile modulus ISO 527-1,-2 MPaalso in Extrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V0 | ISO 527As the sheet prints it: ISO 527-1,-2 | not in the median: measured on a moulded bar |
| Tensile yield strength | 69 MPap. 1: Yield stress ISO 527-1,-2 MPa | ISO 527As the sheet prints it: ISO 527-1,-2 | not in the median: measured on a moulded bar |
| Tensile break strength | 53 MPap. 1: Stress at break ISO 527-1,-2 MPaalso in Extrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V0 | ISO 527As the sheet prints it: ISO 527-1,-2 | not in the median: measured on a moulded bar |
| Elongation at break | 50 %p. 1: Strain at break ISO 527-1,-2 %also in Extrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V0 | ISO 527As the sheet prints it: ISO 527-1,-2 | not in the median: measured on a moulded bar |
| Elongation at yield | 5 %p. 1: Yield strain ISO 527-1,-2 % | ISO 527As the sheet prints it: ISO 527-1,-2 | listed under other properties |
| Izod impact strength | 40 kJ/m²p. 1: Izod notched impact strength (23 °C) ISO 180/A kJ/m² | ISO 180As the sheet prints it: 23 °C kJ/m² ISO 180/A | not in the median: measured on a moulded bar |
| Izod impact strength | 10 kJ/m²p. 1: Izod notched impact strength (-30 °C) ISO 180/A kJ/m² | ISO 180As the sheet prints it: -30 °C kJ/m² ISO 180/A | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 98 °Cp. 1: Temperature of deflection under load 1.8 Mpa ISO 75-1,-2 °C | ISO 75As the sheet prints it: 1.8 Mpa ISO 75-1,-2 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 115 °Cp. 1: VICAT softening temperature B ISO 306 °C | ISO 306 | |
| Thermal conductivity | 0.2 W/(m·K)p. 1: Thermal conductivity, normal ISO 8302 W/(m·K) | ISO 8302 | |
| Density | 1190 kg/m³p. 2: Density ISO 1183-1 kg/m³ | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Water absorption | 0.5 %p. 2: Water absorption (saturation value) ISO 62 %also in Extrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V0 | ISO 62As the sheet prints it: saturation value % ISO 62 | |
| Water absorption | 0.2 %p. 2: Water absorption (equilibrium value) ISO 62 %also in Extrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V0 | ISO 62As the sheet prints it: equilibrium value % ISO 62 | |
| Melt volume-flow rate | 11 cm³/10 minp. 1: Melt volume-flow rate (MVR) 260 °C / 5,0 kg ISO 1133 cm³/10 min | ISO 1133As the sheet prints it: MVR 260 °C / 5 0 kg cm³/10 min ISO 1133 | |
| Mould shrinkage along the melt flow | 0.5–0.7 %p. 1: Molding shrinkage, parallel | specimen not stated, ISO 2577 | |
| Mould shrinkage orientation not stated | 0.5–0.7 %p. 1: Molding shrinkage, normal | specimen not stated, ISO 2577 | |
| Dielectric strength | 35 kV/mmp. 2: Electrical strength | specimen not stated, IEC 60243As the sheet prints it: IEC 60243-1 | |
| Extrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V01 value | |||
| HDT at 0.45 MPa | 106 °Cp. 1: Formbeständigkeitstemperatur 0.45 Mpa | ISO 75As the sheet prints it: ISO 75-1,-2; 0.45 Mpa | not in the median: measured on a moulded bar |
Print settings
- Nozzle
- 260–290 °Cown data sheet
- Bed
- 110 °Cown data sheet
- Heated chamber
- enclosure needed, no temperatureown data sheet
- Drying
- 80 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 260-290 °C; Bed 110 °CExtrudr, TECHNICAL DATA SHEET DURAPRO PC FR V0p. 2: Recommended printing settings; p. 2: Hardened Nozzle; p. 2: Recommended settings
- Nozzle 260-290 °C; Bed 110 °CExtrudr, TECHNISCHES DATENBLATT DURAPRO PC FR V0p. 2: Düse; p. 2: Heizbett; p. 2: Vorgeschlagene Einstellungen
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Good for
Suitable for electrical and electronic applications
Extrudr, TECHNICAL DATA SHEET DURAPRO PC FR V0p. 1 - Good for
DuraPro PC-FR V0 is a UL 94 classified, flame-retardant polycarbonate compound engineered for demanding industrial applications requiring enhanced fire protection performance.
Extrudr, TECHNICAL DATA SHEET DURAPRO PC FR V0p. 1 - Good for
Certified according to EN 45545-2 for railway applications (R22, R23, R24, Hazard Level HL3), this material is particularly suitable for interior components in rail vehicles, as well as other safety-critical electrical and electronic applications where electrical insulation properties, high tensile strength, and elevated temperature resistance are required.
Extrudr, TECHNICAL DATA SHEET DURAPRO PC FR V0p. 1 - Nozzle wear
Hardened nozzle No
Extrudr, TECHNICAL DATA SHEET DURAPRO PC FR V0p. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.