PC

21 products from 15 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
measured after annealing
from the Bambu Lab Filament Guide
Izod where no Charpy is published
shared data sheet
not published

How the numbers are worked out

Bambu Lab PCStrength XY, MPa55Strength Z, MPa34Modulus XY, GPa2.11Charpy notched, kJ/m²7.5HDT 0.45, °C—HDT 1.8, °C117Price, CAD/kg51Nozzle, °C260–280Bed, °C90–110Chamber, °C45–60Drying, °C, h808 h

Bambu Lab PCBambu Lab

Published values

Property	As published	Conditions	On the Overview
Bambu Lab, Technical Data Sheet V3.0 PC13 valuesThe same values also in Bambu Lab, Bambu Filament Technical Data Sheet - PC.Unless a row says otherwise: printed specimen dry Dried before testing (see preparation) annealed at 80 °C for 12 h All the specimens were annealed and dried at 80 °C for 12 h before testing
Tensile modulus XY	2110 ± 40 MPap. 2: Young's Modulus (X-Y) ISO 527, GB/T 1040also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 527, GB/T 1040	in the median
Tensile modulus Z	1450 ± 60 MPap. 2: Young's Modulus (Z) ISO 527, GB/T 1040also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	55 ± 4 MPap. 2: Tensile Strength (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	34 ± 3 MPap. 2: Tensile Strength (Z) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Elongation at break XY	3.8 ± 0.3 %p. 2: Breaking Elongation Rate (X-Y) ISO 527, GB/T 1040also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 527, GB/T 1040	in the median
Elongation at break Z	2.1 ± 0.4 %p. 2: Breaking Elongation Rate (Z) ISO 527, GB/T 1040also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 527, GB/T 1040	in the median
Flexural modulus XY	2310 ± 70 MPap. 2: Bending Modulus (X-Y) ISO 178, GB/T 9341also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 178, GB/T 9341	in the median
Flexural modulus Z	1620 ± 80 MPap. 2: Bending Modulus (Z) ISO 178, GB/T 9341also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 178, GB/T 9341	in the median
Flexural strength XY	108 ± 4 MPap. 2: Bending Strength (X-Y) ISO 178, GB/T 9341also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 178, GB/T 9341	in the median
Flexural strength Z	55 ± 2 MPap. 2: Bending Strength (Z) ISO 178, GB/T 9341also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 178, GB/T 9341	in the median
Charpy impact strength XY	7.5 ± 1.3 kJ/m²p. 2: Impact Strength (X-Y) ISO 179, GB/T 1043also in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 179, GB/T 1043notched	in the median
HDT at 1.8 MPa	117 °Cp. 2: Heat Deflection Temperature ISO 75 1.8 MPaalso in Bambu Lab, Bambu Filament Technical Data Sheet - PC	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	in the median
Glass transition temperature	145 °Cp. 2: Glass Transition Temperature DSC, 10 °C/minalso in Bambu Lab, Bambu Filament Technical Data Sheet - PC	DSC	in the median

Bambu Lab, Bambu Filament Technical Data Sheet - PC10 valuesThe same values also in Bambu Lab, Technical Data Sheet V3.0 PC.Unless a row says otherwise: printed specimen dry Dry annealed at 80 °C for 12 h All the specimens were annealed and dried at 80 °C for 12 hours before testing print settings Specimen Printing Conditions Subjects Data Nozzle Temperature 270 °C Bed Temperature 100 °C Printing Speed 200 mm/s Infill Density 100% *All the specimens were annealed and dried at 80 °C for 12 hours before testing. 1. Tensile Testing 2. Bending Testing 3. Impact Testing • Disclaimer The performance values are tested by standard samples at Bambu Lab, and the values are for d
Tensile strength (yield or break not stated) XY	62 ± 2 MPap. 2: Tensile Strength (X-Y)	ISO 527, GB/T 1040	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Tensile strength (yield or break not stated) Z	56 ± 2 MPap. 2: Tensile Strength (Z)	ISO 527, GB/T 1040	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Charpy impact strength XY	34.8 ± 2.1 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched	ISO 179, GB/T 1043	not in the median: unnotched
Charpy impact strength Z	9.0 ± 0.4 kJ/m²p. 2: Impact Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PC	ISO 179, GB/T 1043	not in the median: notch not stated
HDT at 0.45 MPa	112 °Cphysically implausiblep. 2: Heat Deflection Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PC	ISO 75 As the sheet prints it: ISO 75 0.45 MPa	not in the median: physically implausible as published
Vicat softening temperature	119 °Cp. 2: Vicar Softening Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PC	ISO 306, GB/T 1633
Melting temperature	228 °Cp. 2: Melting Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PC	DSC As the sheet prints it: DSC, 10 °C/min
Density	1.20 g/cm³p. 2: Densityalso in Bambu Lab, Technical Data Sheet V3.0 PC	specimen not stated, ISO 1183
Water absorption	0.25 %p. 2: Saturated Water Absorption Ratealso in Bambu Lab, Technical Data Sheet V3.0 PC	no standard named As the sheet prints it: te 25 °C, 55% RH tested at 25°C
Melt mass-flow rate	32.2 ± 2.9 g/10 minp. 2: Melt Indexalso in Bambu Lab, Technical Data Sheet V3.0 PC	specimen not stated, no standard named As the sheet prints it: 260 °C, 2.16 kg tested at 260°Cmoisture state not statedtreatment not stated

Also named without a value: crystallization temperature.

Print settings

Nozzle: 260–280 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: 45–60 °Cown data sheet
Drying: 80 °C for 8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: 80 °C for 12 hown data sheet

Its 3 print profiles, in the documents' words

Nozzle 260 - 280 °C; Bed 90 - 110 °C; Chamber 45 - 60 °C; Drying 80 °C, 8 hoursBambu Lab, Bambu Filament Technical Data Sheet - PCRecommended printing settings
Nozzle 260 - 280 °C; Bed 90 - 110 °C; Chamber 45 - 60 °C; Drying 80 °C, 8 hBambu Lab, Technical Data Sheet V3.0 PCp. 1: Recommended printing settings: Nozzle Temperature
Drying Dry out before useBambu Lab, PC official maker product pagep. 1: Cautions for Use; p. 1: Cautions for Use

Price

51 CAD/kgits one regular price in the sample

2 listings: 1 in its price, 1 with no regular price per kilogram recorded

Bambu Lab Canada: 51 CAD/kgPC - Black (60101) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
Bambu Lab Canada: 51 per kg, sale pricePC - Clear Black (60102) / Filament with spool / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026

Its 4 documents

What the maker says (6)

Good forIt is highly recommended for high strength 3D printing applications.Bambu Lab, Technical Data Sheet V3.0 PCp. 1
BenefitsPC (Polycarbonate) is an extremely tough and durable material for 3D printing, with good temperature and impact resistance.Bambu Lab, Technical Data Sheet V3.0 PCp. 1
BenefitsIt's also a naturally transparent thermoplastic.Bambu Lab, Technical Data Sheet V3.0 PCp. 1
Warping and shrinkageBambu PC Basic is designed for less shrinkage and better dimensional stability.Bambu Lab, Technical Data Sheet V3.0 PCp. 1
Odour and emissionsOdor OdorlessBambu Lab, Technical Data Sheet V3.0 PCp. 3
Moisture sensitivityAs this filament is highly moisture-absorbent, please place any unused filament in a sealed container with desiccant immediately, and dry thoroughly before printing. For more details, please refer to: Filament drying instructions on WIKI.Bambu Lab, PC official maker product pagep. 1: exact product features/description/application tips, source text line 121

Specimen preparation (1)

All the specimens were annealed and dried at 80 °C for 12 hours before testingBambu Lab, Bambu Filament Technical Data Sheet - PCTest specimen preparation

Chemicals and environment (7)

Water solubility: insolubleInsoluble in waterBambu Lab, Bambu Filament Technical Data Sheet - PCSolubility
Acid resistance: not resistantNot resistantBambu Lab, Bambu Filament Technical Data Sheet - PCResistance to Acid
Alkali resistance: not resistantNot resistantBambu Lab, Bambu Filament Technical Data Sheet - PCResistance to Alkali
Organic solvent resistance: limitedNot resistant to some organic solventsBambu Lab, Bambu Filament Technical Data Sheet - PCResistance to Organic Solvent
Oil and grease resistance: limitedResistant to most kinds of oil and greaseBambu Lab, Bambu Filament Technical Data Sheet - PCResistance to Oil and Grease
Flammability: described in wordsFlammable and self-extinguishing in the airBambu Lab, Bambu Filament Technical Data Sheet - PCFlammability
Post-processing: described in wordsthe suggested annealing temperature of models printed with Bambu PC is 85 to 100 °C, and the time is 6 to 12 hours.Bambu Lab, Technical Data Sheet V3.0 PCp. 3: Annealing note

Polymaker PolyLite PC TransparentStrength XY, MPa69.1Strength Z, MPa52.8Modulus XY, GPa2.5Charpy notched, kJ/m²4.1HDT 0.45, °C111HDT 1.8, °C107Price, CAD/kg39Nozzle, °C250–270Bed, °C90–105Chamber, °C70–80Drying, °C, h808 h

Polymaker PolyLite PC TransparentPolymaker

Published values

Property	As published	Conditions	On the Overview
Polymaker, PolyLite PC15 valuesThe same values also in Polymaker, PolyLite™ PC, Polymaker, PolyLite PC Technical Data Sheet and Polymaker, PolyLite™ PC Transparent Technical Data Sheet.Unless a row says otherwise: printed specimen print settings Printing temperature 255 °C; Bed temperature 100 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 80°C; Cooling fan OFF
Tensile modulus XY	2307 ± 60 MPap. 4: Young’s modulus (X-Y)also in Polymaker, PolyLite™ PC	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Tensile modulus Z	2260 ± 137 MPap. 4: Young’s modulus (Z)	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Tensile strength (yield or break not stated) XY	62.7 ± 1.3 MPap. 4: Tensile strength (X-Y)also in Polymaker, PolyLite™ PC	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Tensile strength (yield or break not stated) Z	41.9 ± 2.1 MPap. 4: Tensile strength (Z)	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Elongation at break XY	3.15 ± 0.35 %p. 4: Elongation at break (X-Y)	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Elongation at break Z	2.2 ± 0.2 %p. 4: Elongation at break (Z)	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Flexural modulus XY	2247 ± 159 MPap. 4: Bending modulus (X-Y)	ISO 178, GB/T 9341	not in the median: another value of this product is in it
Flexural strength XY	100.4 ± 2.1 MPap. 4: Bending strength (X-Y)	ISO 178, GB/T 9341	not in the median: another value of this product is in it
Charpy impact strength XY	3.41 ± 0.03 kJ/m2p. 4: Charpy impact strength (X-Y)	ISO 179, GB/T 1043notched	not in the median: another value of this product is in it
Charpy impact strength XY	9.8 ± 0.5 kJ/m2p. 4: Low temperature impact ISO 179-1/1eA:2010	ISO 179 As the sheet prints it: 179-1/1eA:2010 ISO 179-1/1eA:2010 tested at -30°Cnotched	not in the median: tested below room temperature
Glass transition temperature	113.4 °Cp. 3: Glass transition temperature DSC, 10°C/minalso in Polymaker, PolyLite PC Technical Data Sheet	specimen not stated, DSCprint settings not stated	not in the median: another value of this product is in it
Vicat softening temperature	119.5 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633also in Polymaker, PolyLite PC Technical Data Sheet	specimen not stated, ISO 306, GB/T 1633 As the sheet prints it: 306 ISO 306 GB/T 1633 print settings not stated
Density	1.19 g/cm3p. 2: Density ISO1183, GB/T1033also in Polymaker, PolyLite PC Technical Data Sheetalso in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	specimen not stated, ISO 1183, GB/T 1033 As the sheet prints it: 1183 ISO1183 GB/T1033 print settings not stated
Water absorption	0.253 %p. 2: Equilibrium water absorption (%)=also in Polymaker, PolyLite PC Technical Data Sheetalso in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	specimen not stated, no standard statedprint settings not stated
Melt mass-flow rate	8-11 g/10minp. 2: Melt index 260°C, 2.16kgalso in Polymaker, PolyLite PC Technical Data Sheetalso in Polymaker, PolyLite™ PCalso in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	specimen not stated, no standard named As the sheet prints it: 260°C 2.16kg tested at 260°Cprint settings not stated

Polymaker, PolyLite PC Technical Data Sheet11 valuesThe same values also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet and Polymaker, PolyLite PC.Unless a row says otherwise: printed specimen moisture All specimens were conditioned at room temperature for 24h prior to testing as printed All specimens were conditioned at room temperature for 24 h prior to testing print settings Printed at 255 °C nozzle, 100 °C bed, 2 shells, 4 top and bottom layers, 100% infill, 80 °C environmental temperature, cooling fan off (p. 5: how to make specimens); the mechanical table adds "Specimens printed on Raise 3D E2 with 0.4mm nozzle" (p. 4)
Tensile modulus XY	2497 ± 154 MPap. 4: Young's modulus (X-Y)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 527, GB/T 1040	in the median
Tensile modulus Z	2371 ± 55 MPap. 4: Young's modulus (Z)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	69.1 ± 3.0 MPap. 4: Tensile strength (X-Y)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	52.8 ± 1.7 MPap. 4: Tensile strength (Z)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 527, GB/T 1040	in the median
Elongation at break XY	4.8 ± 0.9 %p. 4: Elongation at break (X-Y)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 527, GB/T 1040	in the median
Elongation at break Z	2.7 ± 0.1 %p. 4: Elongation at break (Z)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 527, GB/T 1040	in the median
Flexural modulus XY	2640 ± 47 M P ap. 4: Bending modulus (X-Y)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 178, GB/T 9341	in the median
Flexural strength XY	106.1 ± 1.6 M P ap. 4: Bending strength (X-Y)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 178, GB/T 9341	in the median
Charpy impact strength XY	4.1 ± 0.9 kJ /m2p. 4: Charpy impact strength (X-Y)also in Polymaker, PolyLite™ PC Transparent Technical Data Sheet	ISO 179, GB/T 1043notched	in the median
HDT at 0.45 MPa	111.2 °Cp. 3: Heat deflection temperature ISO 75 0.45MPaalso in Polymaker, PolyLite PC	ISO 75 As the sheet prints it: ISO 75 0.45MPa moisture state not stated	in the median
HDT at 1.8 MPa	106.6 °Cp. 3: Heat deflection temperature ISO 75 1.8MPaalso in Polymaker, PolyLite PC	ISO 75 As the sheet prints it: ISO 75 1.8MPa moisture state not stated	in the median

Polymaker, PolyLite™ PC6 values
Elongation at break XY	3.2 ± 0.4 %p. 6: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040)	ASTM D638, ISO 527, GB/T 1040	not in the median: another value of this product is in it
Flexural modulus orientation not stated	2477 ± 159 MPap. 6: Bending modulus ASTM D790 (ISO 178, GB/T 9341)	ASTM D790, ISO 178, GB/T 9341 As the sheet prints it: 790 ASTM D790 ISO 178 GB/T 9341	not in the median: another value of this product is in it
Flexural strength orientation not stated	100.4 ± 2.7 MPap. 6: Bending strength ASTM D790 (ISO 178, GB/T 9341)	ASTM D790, ISO 178, GB/T 9341 As the sheet prints it: 790 ASTM D790 ISO 178 GB/T 9341	not in the median: another value of this product is in it
Impact strength, test unclear	3.4 ± 0.1 kJ/m2p. 6: Charpy impact strength ASTM D256 (ISO 527, GB/T 1040)	ASTM D256, ISO 527, GB/T 1040 As the sheet prints it: 256 ASTM D256 ISO 527 GB/T 1040 notchedWhich test: probably Charpy	listed under other properties
Vicat softening temperature	119 °Cp. 6: Vicat softening temperature ASTM D1525 (ISO 306, GB/T 1633)	ASTM D1525, ISO 306, GB/T 1633 As the sheet prints it: 1525 ASTM D1525 ISO 306 GB/T 1633
Density	1.19-1.20 g/cm3p. 6: Density ASTM D792 (ISO 1183, GB/T 1033)	ASTM D792, ISO 1183, GB/T 1033 As the sheet prints it: 792 ASTM D792 ISO 1183 GB/T 1033
Polymaker, PolyLite™ PC Transparent Technical Data Sheet2 valuesThe same values also in Polymaker, PolyLite™ PC.Unless a row says otherwise: specimen not stated
Glass transition temperature	113 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in Polymaker, PolyLite™ PC	DSC	in the median
Vicat softening temperature	120 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633	ISO 306, GB/T 1633 As the sheet prints it: 306 ISO 306 GB/T 1633

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 90–105 °Cown data sheet
Heated chamber: 70–80 °Cown data sheet
Drying: 80 °C for 8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): drying in Polymaker, Polymaker PolyLite PC Transparent official maker product page.

Its 5 print profiles, in the documents' words

Nozzle 250°C - 270°C; Bed 90°C - 105°C; Drying 80˚C for 8hPolymaker, PolyLite™ PCp. 6: Recommended printing settings; p. 6: Drying settings
Nozzle 250 – 270 (℃); Bed 90 - 105 (˚C); Chamber 70-80 (˚C)(Recommended)Polymaker, PolyLite PCp. 4: Recommended printing settings: Nozzle temperature; p. 4: Environmental temperature; p. 4: Enclosure note
Nozzle 245-270°C; Bed 90-105°C; Chamber Needed (70°C-100°C); Drying 75°C/6HPolymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Closure chamber; p. 1: Drying temp. and time
Nozzle 250 – 270 (℃); Bed 90 - 105 (˚C); Chamber 70-80 (˚C)(Recommended)Polymaker, PolyLite PC Technical Data Sheetp. 4: Recommended printing settings: Nozzle temperature; Build plate temperature; Environmental temperature; Note
Nozzle 250-270 °C; Bed 90-105 °C; Drying 75˚C for 12h (Only if the material has absorbed moisture)Polymaker, Polymaker PolyLite PC Transparent official maker product pagep. 1: Technical Specifications

Price

39 CAD/kgits one regular price in the sample

1 listing

Voxel Factory: 39 CAD/kgPolymaker PolyLite Transparent PC 1.75mm 1kg (SKU PMK-PCB-TRS-175-1KG)in its price; seen 30 Sep 2026

Its 6 documents

What the maker says (20)

Warping and shrinkageIt is recommended to use an enclosure to print PolyLite™ PC to prevent warping issue.Polymaker, PolyLite™ PCp. 4
Odour and emissionsIt is recommended to place the printer in a well ventilated area.Polymaker, PolyLite™ PCp. 4
Printing adviceIt is recommended to print the first layer thick and a little further from the build plate (0.15mm-0.2mm).Polymaker, PolyLite™ PCp. 4
Printing adviceSurface adhesion Brim or RaftPolymaker, PolyLite™ PCp. 4
Surface finishPolyLite™ PC can be sanded to obtain a smoother surface.Polymaker, PolyLite™ PCp. 5
Moisture sensitivityIt is recommended to store PolyLite™ PC in the PolyBox™ to prevent moisture absorption which will lower the quality and the mechanical properties of the print.Polymaker, PolyLite™ PCp. 5
Printing advicePolyLite™ PC can be annealed right after the printing process at 100˚C for 2 hours to release residual internal stress and therefore preserve its mechanical properties.Polymaker, PolyLite™ PCp. 5
BenefitsIt delivers good stiffness and heat resistance with light diffusing properties.Polymaker, PolyLite™ PCp. 6
Supports and removalRecommended support material PolyDissolve™ S2Polymaker, PolyLite PCp. 4
Printing adviceFor large part, it is recommended to use a heated chamber.Polymaker, PolyLite PCp. 4
Printing adviceIt is recommended to anneal the printed part right after the printing process to release the residual internal stress.Polymaker, PolyLite PCp. 4
Printing adviceWhen printing with PolyLite™ PC, it is recommended to use an enclosure.Polymaker, PolyLite PCp. 4
BenefitsIt delivers good stiffness and heat resistance with light diffusing properties.Polymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1
Moisture sensitivityIt is highly recommended to use the PolyBox™ or PolyDryer™ Box when printing or storing.Polymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1
Printing adviceFor large part, it is recommended to use a heated chamber.Polymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1
Printing adviceIt is recommended to anneal the printed part right after the printing process to release the residual internal stress.Polymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1
Printing adviceWhen printing with PolyLite™ PC, it is recommended to use an enclosure.Polymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1
Good forLight Diffusing and Translucent Properties With its impressive translucency, PolyLite™ PC allows light to pass through, making it an excellent choice for projects that require light diffusion or aesthetic illumination effects.Polymaker, Polymaker PolyLite PC Transparent official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 168
Printing adviceActively heated chamber highly recommended. Minimum 60˚C chamber temp highly recommended.Polymaker, Polymaker PolyLite PC Transparent official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 173
Printing adviceDrying Settings: 75˚C for 12h (Only if the material has absorbed moisture)Polymaker, Polymaker PolyLite PC Transparent official maker product pagep. 1: own product Printing Requirements/Recommendations, source text line 182

Chemicals and environment (10)

Post-processing: described in wordsAnnealing settings: 90˚C for 2hPolymaker, PolyLite PC Technical Data Sheetp. 4: Annealing note
Post-processing: described in wordsAnnealing settings: 90°C for 2hPolymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1: Annealing note
Acid resistance: limitedSlight resistantEffect of weak acids · weakPolymaker, PolyLite PC Technical Data Sheetp. 2: Effect of weak acids Slight resistant
Acid resistance: not resistantNot resistantEffect of strong acids · strongPolymaker, PolyLite PC Technical Data Sheetp. 2: Effect of strong acids Not resistant
Acid resistance: resistantGoodEffect of weak acids · weakPolymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1: Effect of weak acids Good
Acid resistance: not resistantPoorEffect of strong acids · strongPolymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1: Effect of strong acids Poor
Alkali resistance: limitedFairEffect of weak alkalis · weakPolymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis and its own generic-rating legend
Alkali resistance: not resistantPoorEffect of strong alkalis · strongPolymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis and its own generic-rating legend
Oil and grease resistance: resistantGoodEffect of oils and greasePolymaker, PolyLite™ PC Transparent Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease and its own generic-rating legend
Organic solvent resistance: not resistantNot resistantEffect of organic solventPolymaker, PolyLite PC Technical Data Sheetp. 2: Effect of organic solvent

Polymaker PolyMax PCStrength XY, MPa53.4Strength Z, MPa41.4Modulus XY, GPa2.44Charpy notched, kJ/m²21.3HDT 0.45, °C114HDT 1.8, °C99Price, CAD/kg67Nozzle, °C250–270Bed, °C90–105Chamber, °C70–80Drying, °C, h756 h

Polymaker PolyMax PCPolymaker

Published values

Property	As published	Conditions	On the Overview
Polymaker, PolyMax™ PC Technical Data Sheet17 valuesThe same values also in Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PC.
Tensile modulus XY	2435 ± 63 MPap. 1: Young’s modulus (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Tensile modulus Z	2149 ± 119 MPap. 1: Young’s modulus (Z)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Tensile strength (yield or break not stated) XY	53.44 ± 0.60 MPap. 1: Tensile strength (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Tensile strength (yield or break not stated) Z	41.43 ± 1.50 MPap. 1: Tensile strength (Z)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Elongation at break XY	4.53 ± 0.45 %p. 1: Elongation at break (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Elongation at break Z	2.79 ± 0.21 %p. 1: Elongation at break (Z)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Flexural modulus XY	2050 ± 79 MPap. 1: Bending modulus (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Flexural strength XY	81.29 ± 1.53 MPap. 1: Bending strength (X-Y)	ISO 527, GB/T 1040 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
Charpy impact strength XY	21.28 ± 1.69 kJ/m2p. 1: Notched charpy impact strength (X-Y) ISO 179, GB/T 1043	ISO 179, GB/T 1043 print settings Printing temperature 260°C; Infill 100%; Bed temperature 100°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C	in the median
HDT at 0.45 MPa	114°Cp. 1: Heat deflection temp. 0.45MPa	ISO 75 As the sheet prints it: ISO 75; 0.45 MPa	in the median
HDT at 1.8 MPa	99°Cp. 1: Heat deflection temp. 1.8MPa	ISO 75 As the sheet prints it: ISO 75; 1.8 MPa	in the median
Glass transition temperature	113 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PC	DSC	in the median
Vicat softening temperature	117 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633	ISO 306, GB/T 1633 As the sheet prints it: 306 ISO 306 GB/T 1633
Decomposition temperature	>360°Cp. 1: Decomposition temp.	TGA As the sheet prints it: TGA, 20°C/min; rate=20 °C/min
Density	1.19 g/cm3p. 1: Density ISO1183, GB/T 1033	ISO 1183, GB/T 1033 As the sheet prints it: 1183 ISO1183 GB/T 1033
Water absorption	0.253%p. 1: MOISTURE ABSORPTION CURVE,70%RH23°C, equilibrium footnote	no standard named As the sheet prints it: Equilibrium water absorption rate;70% RH,23°C after moisture conditioning Equilibrium; moisture absorption curve at70% RH,23°C tested at 23°C
Melt mass-flow rate	6-8 g/10minp. 1: Melt index 260°C, 1.2kgalso in Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PC	no standard named As the sheet prints it: 260°C 1.2kg tested at 260°C

Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PC8 valuesUnless a row says otherwise: printed specimen moisture All specimens were conditioned at room temperature for 24h prior to testing print settings nozzle temperature = 255 °C, printing speed = 60 mm/s, build plate temperature = 100 °C, infill = 100%
Tensile modulus XY	2048 ± 66 MPap. 1: Young’s modulus (X-Y) ASTM D638 (ISO 527, GB/T 1040)	ASTM D638, ISO 527, GB/T 1040	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Tensile strength (yield or break not stated) XY	59.7 ± 1.8 MPap. 1: Tensile strength (X-Y) ASTM D638 (ISO 527, GB/T 1040)	ASTM D638, ISO 527, GB/T 1040	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Tensile strength (yield or break not stated) Z	29.1 ± 4.1 MPap. 1: Tensile strength (Z) ASTM D638 (ISO 527, GB/T 1040)	ASTM D638, ISO 527, GB/T 1040	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Elongation at break XY	12.2 ± 1.4 %p. 1: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040)	ASTM D638, ISO 527, GB/T 1040	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural modulus orientation not stated	2044 ± 55 MPap. 1: Bending modulus ASTMD790 (ISO 178, GB/T 9341)	ASTM D790, ISO 178, GB/T 9341 As the sheet prints it: 790 ASTMD790 ISO 178 GB/T 9341	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural strength orientation not stated	94.1 ± 0.9 MPap. 1: Bending strength ASTMD790 (ISO 178, GB/T 9341)	ASTM D790, ISO 178, GB/T 9341 As the sheet prints it: 790 ASTMD790 ISO 178 GB/T 9341	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Impact strength, test unclear	25.1 ± 1.9 kJ/m2p. 1: Charpy impact strength ASTM D256 (ISO 179, GB/T 1043)	ASTM D256, ISO 179, GB/T 1043 As the sheet prints it: 256 ASTM D256 ISO 179 GB/T 1043 notchedWhich test: probably Charpy	listed under other properties
Density	1.18-1.20 g/cm3p. 1: Density ASTM D792 (ISO 1183, GB/T 1033)	ASTM D792, ISO 1183, GB/T 1033 As the sheet prints it: 792 ASTM D792 ISO 1183 GB/T 1033 moisture state not statedprint settings not stated

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 90–105 °Cown data sheet
Heated chamber: 70–80 °Cown data sheet
Drying: 75 °C for 6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): heated chamber in Polymaker, PolyMax PC official maker product page; drying in Polymaker, PolyMax PC official maker product page.

Its 3 print profiles, in the documents' words

Nozzle 250-270°C; Bed 90-105°C; Chamber Not needed (70°C-100°C); Drying 75°C/6HPolymaker, PolyMax™ PC Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
Nozzle 250 - 270 (˚C); Bed 90 - 105 (˚C); Chamber 70 – 80 (recommended) (˚C)Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PCp. 1: Recommended printing settings: Nozzle temperature; p. 1: Recommended environmental temperature; p. 1: Enclosure note; p. 1: Build Surface material; p. 1: Footnote to printing conditions
Nozzle 250˚C - 270˚C; Bed 90˚C - 105˚C; Chamber Minimum 70˚C chamber temp highly recommended.; Drying 75˚C for 6h (Only if the material has absorbed moisture)Polymaker, PolyMax PC official maker product pagep. 1: Printing Requirements; p. 1: Printing Requirements; p. 1: Printing Requirements; p. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings

Price

66.7 CAD/kgits one regular price in the sample

1 listing

Voxel Factory: 66.7 CAD/kgPolymaker PolyMax PC 1.75mm 0.75kg / Black (SKU PMK-MXC-BLK-175-750)in its price; seen 30 Sep 2026

Its 4 documents

What the maker says (12)

BenefitsPolyMax™ PC is an engineered PC filament combining excellent strength, toughness, heat resistance and printing quality.Polymaker, PolyMax™ PC Technical Data Sheetp. 1
Printing adviceFor large part it is recommended to use a heated chamber.Polymaker, PolyMax™ PC Technical Data Sheetp. 1
Printing adviceIt is recommended to anneal the printed part right after the printing process to release the residual internal stress.Polymaker, PolyMax™ PC Technical Data Sheetp. 1
Printing adviceWhen printing with PolyMax™ PC it is recommended to use an enclosure.Polymaker, PolyMax™ PC Technical Data Sheetp. 1
BenefitsPolyMax™ PC is an engineered PC filament combining excellent strength, toughness, heat resistance and printing quality.Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PCp. 1
Supports and removalRecommended support material PolySupport™Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PCp. 1
Printing adviceFor large part it is recommended to use a heated chamber.Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PCp. 1
Printing adviceIt is recommended to anneal the printed part right after the printing process to release the residual internal stress.Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PCp. 1
Printing adviceWhen printing with PolyMax™ PC it is recommended to use an enclosure.Polymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PCp. 1
Good forExceptional Strength and Heat Resistance This filament is ideal for projects where both mechanical strength and high thermal stability are essential. PolyMax™ PC withstands challenging environments, making it perfect for functional prototypes, tooling, and end-use parts.Polymaker, PolyMax PC official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 191
Pitfalls and limitationsThe short answer is yes, PolyLite™ PC will absorb moisture slightly faster than regular PLA. We recommend using a dry box to achieve high quality and strong prints.Polymaker, PolyMax PC official maker product pagep. 1: exact product Description/Printing Requirements/FAQ; source text line 281
Printing adviceActively heated chamber highly recommended. Minimum 70˚C chamber temp highly recommended.Polymaker, PolyMax PC official maker product pagep. 1: own product Printing Requirements/Recommendations, source text line 197

Chemicals and environment (7)

Post-processing: described in wordsAnnealing setting 90°C/2HPolymaker, PolyMax™ PC Technical Data Sheetp. 1: Annealing setting
Post-processing: described in wordsAnnealing settings: 100˚C for 2hPolymaker, Nov. 2018 Technical Data Sheet Version 4.1 PolyMax™ PCp. 1: Annealing note
Acid resistance: resistantGoodEffect of weak acids · weakPolymaker, PolyMax™ PC Technical Data Sheetp. 1: Effect of weak acids Good
Acid resistance: not resistantPoorEffect of strong acids · strongPolymaker, PolyMax™ PC Technical Data Sheetp. 1: Effect of strong acids Poor
Alkali resistance: limitedFairEffect of weak alkalis · weakPolymaker, PolyMax™ PC Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis and its own generic-rating legend
Alkali resistance: not resistantPoorEffect of strong alkalis · strongPolymaker, PolyMax™ PC Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis and its own generic-rating legend
Oil and grease resistance: resistantGoodEffect of oils and greasePolymaker, PolyMax™ PC Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease and its own generic-rating legend

eSUN PC-HTStrength XY, MPa67.6Strength Z, MPa50.6Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C114HDT 1.8, °C—Price, CAD/kg45Nozzle, °C280–310Bed, °C100–110Chamber, °CenclosedDrying, °C, h95–1055–7 h

eSUN PC-HTeSUN

Published values

Property	As published	Conditions	On the Overview
eSUN, Technical Data Sheet PC-HT13 valuesUnless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	67.6 MPap. 2: Tensile Strength (X-Y) GB/T 1040	GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	50.6 MPap. 2: Tensile Strength (Z) GB/T 1040	GB/T 1040	in the median
Elongation at break XY	7.3 %p. 2: Elongation at Break (X-Y) GB/T 1040	GB/T 1040	in the median
Elongation at break Z	4.9 %p. 2: Elongation at Break (Z) GB/T 1040	GB/T 1040	in the median
Flexural modulus XY	2353.5 MPap. 2: Flexural Modulus (X-Y) GB/T 9341	GB/T 9341	in the median
Flexural modulus Z	2340.6 MPap. 2: Flexural Modulus (Z) GB/T 9341	GB/T 9341	in the median
Flexural strength XY	97.2 MPap. 2: Flexural Strength (X-Y) GB/T 9341	GB/T 9341	in the median
Flexural strength Z	76.3 MPap. 2: Flexural Strength (Z) GB/T 9341	GB/T 9341	in the median
Izod impact strength XY	13.6 kJ/m2p. 2: IZOD Impact Strength (X-Y) GB/T 1843	GB/T 1843	not in the median: notch not stated
Izod impact strength Z	2.4 kJ/m2p. 2: IZOD Impact Strength (Z) GB/T 1843	GB/T 1843	not in the median: notch not stated
HDT at 0.45 MPa	113.6 ℃p. 1: Heat Distortion Temperature GB/T 1634	GB/T 1634 As the sheet prints it: GB/T 1634 0.45Mpa	in the median
Density	1.23 g/cm3p. 1: Density GB/T 1033	specimen not stated, GB/T 1033
Melt mass-flow rate	39.6 g/10minp. 1: Melt Flow Index GB/T 3682	specimen not stated, GB/T 3682

Print settings

Nozzle: 280–310 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 95–105 °C for 5–7 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 280-310℃ (Recommended temperature 290-300℃); Bed 100-110℃; Drying 95-105℃,5-7 hourseSUN, Technical Data Sheet PC-HTp. 2: Recommended printing settings: Extruder Temperature; p. 2: Drying Preparation; p. 3: Printing note

Price

45 CAD/kgthe median of its 2 regular prices in the sample

2 listings

Shop3D.ca: 45 CAD/kgeSun 3D Printing PC-HT Filament - 1.75mm (1kg) / White (SKU PC-HT175W1TZ1)in its price; seen 30 Sep 2026
DigitMakers: 45 CAD/kgeSUN PC-HT Filament 1.75mm 1kg / Grey (SKU ESUN-PC-HT-1.75-1KG-GRY)in its price; seen 30 Sep 2026

Its 2 documents

What the maker says (5)

Good forPC-HT filaments have the advantages of high interlayer strength, good temperature resistance, and small warping, and can be widely used in electronic appliances, household appliances, instrumentation, engineering accessories, etc.eSUN, Technical Data Sheet PC-HTp. 1
BenefitsHigh speed printingeSUN, Technical Data Sheet PC-HTp. 1
Warping and shrinkageThe addition of PET to PC can improve the warping defects of line printing and improve the strength of printing between layers, and the addition of PCTG can reduce the impact of PET on PC temperature resistance and improve printing drawing.eSUN, Technical Data Sheet PC-HTp. 1
Warping and shrinkageDue to its high shrinkage rate, we highly recommend printing PC-HT material within a closed chamber printer.eSUN, Technical Data Sheet PC-HTp. 3
Printing adviceminimize overhang angles in model structures, or print with a warm cavity for thermal insulation.eSUN, Technical Data Sheet PC-HTp. 3

Chemicals and environment (2)

UV and outdoor: described in wordsNot resistant to ultraviolet lightUVeSUN, Technical Data Sheet PC-HTp. 2: Main features, ultraviolet-light line
Hydrolytic stability: described in wordsPoor stability of resistance to hydrolysisHydrolysis / dimensional stabilityeSUN, Technical Data Sheet PC-HTp. 2: Main features, hydrolysis line

Raise3D Premium PC Black WhiteStrength XY, MPa60Strength Z, MPa29Modulus XY, GPa2.05Charpy notched, kJ/m²—HDT 0.45, °C114HDT 1.8, °C99Price, CAD/kg—Nozzle, °C250–270Bed, °C90–105Chamber, °C70–80Drying, °C, h808 h

Raise3D Premium PC Black WhiteRaise3D

Published values

Property	As published	Conditions	On the Overview
Raise3D, Raise3D Premium PC Technical Data Sheet14 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	2048 ± 66 MPap. 1: Young’s modulus (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	60 ± 1.8 MPap. 1: Tensile strength (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	29 ± 4 MPap. 1: Tensile strength (Z) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Elongation at break XY	12.2 ± 1.4 %p. 1: Elongation at break (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Flexural modulus orientation not stated	2044 ± 55 MPap. 1: Bending modulus ISO 178, GB/T 9341	ISO 178, GB/T 9341	in the median
Flexural strength orientation not stated	94 ± 1 MPap. 1: Bending strength ISO 178, GB/T 9341	ISO 178, GB/T 9341	in the median
Charpy impact strength	25 ± 2 kJ/m2p. 1: Charpy impact strength ISO 179, GB/T 1043	ISO 179, GB/T 1043	not in the median: notch not stated
HDT at 0.45 MPa	114 °Cp. 1: Heat distortion temperature ISO 75@0.45 MPa	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
HDT at 1.8 MPa	99 °Cp. 1: Heat distortion temperature ISO 75@1.8 MPa	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	in the median
Glass transition temperature	113 °Cp. 1: Glass transition temperature DSC, 10°C /min	DSC	in the median
Vicat softening temperature	117 °Cp. 1: Vicat Softening temperature ISO 306 GB/T 1633	ISO 306, GB/T 1633
Decomposition temperature	360 °Cp. 1: Decomposition temperature TGA, 20 °C/min	TGA
Density	1.18-1.20 g/cm³p. 1: Density ISO 1183, GB/T 1033	specimen not stated, ISO 1183, GB/T 1033
Melt mass-flow rate	6-8 g/10 minp. 1: Melt index 260 °C, 1.2 kg	specimen not stated, no standard named As the sheet prints it: 260 °C 1.2 kg tested at 260°C

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 90–105 °Cown data sheet
Heated chamber: 70–80 °Cown data sheet
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 250 - 270 (°C); Bed 90 - 105 (°C); Chamber 70 – 80 (recommended) (°C)Raise3D, Raise3D Premium PC Technical Data Sheetp. 2: Recommended printing settings: Nozzle temperature; p. 2: Build Surface material; p. 2: Based on 0.4 mm nozzle

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

BenefitsRaise3D Premium PC is an advanced polycarbonate (PC) filament with superior printability and mechanical properties, particularly fracture toughness.Raise3D, Raise3D Premium PC Technical Data Sheetp. 1

Chemicals and environment (1)

Post-processing: described in wordsNote: After the printing, it is recommended to anneal the model in the oven at 100°C for 2 hours.Raise3D, Raise3D Premium PC Technical Data Sheetp. 2: Annealing note

Raise3D Premium PCStrength XY, MPa63Strength Z, MPa—Modulus XY, GPa2.31Charpy notched, kJ/m²—HDT 0.45, °C111HDT 1.8, °C107Price, CAD/kg72Nozzle, °C250–270Bed, °C90–105Chamber, °C70–80Drying, °C, h808 h

Raise3D Premium PCRaise3D

Published values

Property	As published	Conditions	On the Overview
Raise3D, Raise3D Premium PC Technical Data Sheet13 valuesThe same values also in Raise3D, Raise3D Premium PC Technical Data Sheet.Unless a row says otherwise: printed specimen print settings nozzle temperature = 255 °C; printing speed = 60 mm/s; build plate temperature = 100 °C; infill = 100%
Tensile modulus XY	2307 ± 60 MPap. 1: Young’s modulus (X-Y) ISO 527, GB/T 1040also in Raise3D, Raise3D Premium PC Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Tensile strength (yield or break not stated) XY	63 ± 1 MPap. 1: Tensile strength (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Elongation at break XY	3.2 ± 0.4 %p. 1: Elongation at break (X-Y) ISO 527, GB/T 1040also in Raise3D, Raise3D Premium PC Technical Data Sheet	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Flexural modulus orientation not stated	2477 ± 159 MPap. 1: Bending modulus ISO 178, GB/T 9341also in Raise3D, Raise3D Premium PC Technical Data Sheet	ISO 178, GB/T 9341 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Flexural strength orientation not stated	100 ± 3 MPap. 1: Bending strength ISO 178, GB/T 9341	ISO 178, GB/T 9341 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Charpy impact strength	3.4 ± 0.1 kJ/m²p. 1: Charpy impact strength ISO 179, GB/T 1043	ISO 179, GB/T 1043 moisture All specimens were conditioned at room temperature for 24h prior to testing	not in the median: notch not stated
HDT at 0.45 MPa	111 °Cp. 1: Heat distortion temperature ISO 75@0.45 MPa	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
HDT at 1.8 MPa	107 °Cp. 1: Heat distortion temperature ISO 75@1.8 MPa	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	in the median
Glass transition temperature	113 °Cp. 1: Glass transition temperature DSC, 10 °C /min	ASTM D1525	in the median
Vicat softening temperature	119 °Cp. 1: Vicat Softening temperature	ASTM D1525
Decomposition temperature	129-132 °Cphysically implausiblep. 1: Decomposition temperature TGA, 20 °C/min	TGAprint settings not stated
Density	1.19-1.20 g/cm³p. 1: Density ISO 1183, GB/T 1033also in Raise3D, Raise3D Premium PC Technical Data Sheet	specimen not stated, ISO 1183, GB/T 1033print settings not stated
Melt mass-flow rate	8-11 g/10 minp. 1: Melt index 260 °C, 1.2 kg	specimen not stated, no standard named As the sheet prints it: 260 °C 1.2 kg tested at 260°Cprint settings not stated
Raise3D, Raise3D Premium PC Technical Data Sheet2 valuesUnless a row says otherwise: printed specimen moisture conditioned at room temperature for 24h prior to testing
Tensile strength (yield or break not stated) XY	62.7 ± 1.3 (MPa)p. 1: Tensile strength (X-Y)	ASTM D638, ISO 527, GB/T 1040 As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040)	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Flexural strength orientation not stated	100.4 ± 2.7 (MPa)p. 1: Bending strength	ASTM D790, ISO 178, GB/T 9341 As the sheet prints it: ASTM D790 (ISO 178, GB/T 9341)	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 90–105 °Cown data sheet
Heated chamber: 70–80 °Cown data sheet
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Raise3D, Raise3D Premium PC Technical Data Sheet.

Its 2 print profiles, in the documents' words

Nozzle 250 - 270 (°C); Bed 90 - 105 (°C); Chamber 70 – 80 (recommended) (°C)Raise3D, Raise3D Premium PC Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 2: Based on 0.4 mm nozzle
Nozzle 250 - 270; Bed 80 - 105; Chamber 70 – 80 (recommended) (˚C)Raise3D, Raise3D Premium PC Technical Data Sheetp. 1: Nozzle temperature; p. 2: Build plate temperature; p. 2: Recommended environmental temperature; p. 1: Build Surface material; p. 2: Based on 0.4 mm nozzle

Price

72 CAD/kgits one regular price in the sample

1 listing

Shop3D.ca: 72 CAD/kgRaise3D Premium PC Filament - 1.75mm (1kg) / Black (SKU [S]5.11.19136A01)in its price; seen 30 Sep 2026

Its 3 documents

What the maker says (2)

BenefitsRaise3D Premium PC is a polycarbonate based filament with good printability.Raise3D, Raise3D Premium PC Technical Data Sheetp. 1
BenefitsRaise3D Premium PC is a polycarbonate based filament with good printability.Raise3D, Raise3D Premium PC Technical Data Sheetp. 1

Chemicals and environment (1)

Post-processing: described in wordsNote: After the printing, it is recommended to anneal the model in the oven at 100°C for 2 hours.Raise3D, Raise3D Premium PC Technical Data Sheetp. 2: Annealing note

3DXTECH 3DXMAX PolycarbonateStrength XY, MPa62Strength Z, MPa—Modulus XY, GPa2.41Charpy notched, kJ/m²—HDT 0.45, °C135HDT 1.8, °C—Price, CAD/kg—Nozzle, °C280–310Bed, °C110–120Chamber, °C—Drying, °C, h120≥ 4 h

3DXTECH 3DXMAX Polycarbonate3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: 3DXMAX® Polycarbonate 3D Printing Filament8 valuesUnless a row says otherwise: printed specimen print settings Printed Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 275-295°C Bed Temp: 110-120°C Specimen Orientation: XY Flat
Tensile modulus XY	2410 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	in the median
Tensile break strength XY	62 MPap. 1: Tensile Strength, Break ISO 527 MPa	ISO 527	in the median
Elongation at break XY	7 %p. 1: Tensile Elongation, Break ISO 527 %	ISO 527	in the median
Flexural modulus XY	2200 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	in the median
Flexural strength XY	78 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	in the median
HDT at 0.45 MPa	135 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C	ISO 75 As the sheet prints it: ISO 75, 0.45 MPa (66psi)	in the median
Glass transition temperature	147 °Cp. 1: Glass Transition Temperature (Tg) DSC °C	DSC As the sheet prints it: Tg DSC °C	in the median
Density	1.2 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183 As the sheet prints it: 1183 g/cc ISO 1183

Print settings

Nozzle: 280–310 °Cown data sheet
Bed: 110–120 °Cown data sheet
Heated chamber: not stated
Drying: 120 °C for ≥ 4 hown data sheet
Hardened nozzle: not neededown data sheet

Its 2 print profiles, in the documents' words

No temperature stated3DXTECH, Technical Data Sheet: 3DXMAX® Polycarbonate 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
Nozzle 280-310C; Bed 110-120C; Chamber Recommended; Drying 120C for 4+ hours3DXTECH, 3DXMAX® PCp. 1: Wide processing range; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs

Price

Not in the price sample.

Its 3 documents

What the maker says (10)

Warping and shrinkageAmorphous structure gives it low, near isotropic shrinkage3DXTECH, 3DXMAX® PCp. 1
BenefitsHigh thermal properties, with a Tg of 147C3DXTECH, 3DXMAX® PCp. 1
BenefitsExcellent ductility and impact resistance3DXTECH, 3DXMAX® PCp. 1
Odour and emissionsVery low odor while printing3DXTECH, 3DXMAX® PCp. 1
BenefitsWide processing range of 280-310C3DXTECH, 3DXMAX® PCp. 1
BenefitsPC has some of the best mechanical properties & high-heat resistance in the 3D Printing world (Tg of 147C).3DXTECH, 3DXMAX® PCp. 1
Good forOur PC allows for the printing of functional prototypes and production parts with very fine detail and excellent surface quality.3DXTECH, 3DXMAX® PCp. 1
Printing advice3DXMAX PC is suitable for use in both consumer-grade and industrial FDM/FFF printers that have a heated print bed and extruders which can reach upwards of 300C.3DXTECH, 3DXMAX® PCp. 1
Printing adviceHeated Chamber Recommended3DXTECH, 3DXMAX® PCp. 1
Nozzle wearNozzle Specs No special concerns3DXTECH, 3DXMAX® PCp. 1

3DXTECH ezPC PolycarbonateStrength XY, MPa58Strength Z, MPa—Modulus XY, GPa2.18Charpy notched, kJ/m²—HDT 0.45, °C112HDT 1.8, °C—Price, CAD/kg—Nozzle, °C255–275Bed, °C90–110Chamber, °C—Drying, °C, h80≥ 4 h

3DXTECH ezPC Polycarbonate3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: ezPC™ Polycarbonate 3D Printing Filament8 valuesUnless a row says otherwise: printed specimen print settings Printed Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 265°C Bed Temp: 100°C Specimen Orientation: XY Flat
Tensile modulus XY	2180 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	in the median
Tensile break strength XY	58 MPap. 1: Tensile Strength, Break ISO 527 MPa	ISO 527	in the median
Elongation at break XY	14 %p. 1: Tensile Elongation, Break ISO 527 %	ISO 527	in the median
Flexural modulus XY	2150 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	in the median
Flexural strength XY	91 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	in the median
HDT at 0.45 MPa	112 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C	ISO 75 As the sheet prints it: ISO 75, 0.45 MPa (66psi)	in the median
Glass transition temperature	118 °Cp. 1: Glass Transition Temperature DSC °C	DSC As the sheet prints it: DSC Tg	in the median
Density	1.2 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183 As the sheet prints it: 1183 g/cc ISO 1183

Print settings

Nozzle: 255–275 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: not stated
Drying: 80 °C for ≥ 4 hown data sheet
Hardened nozzle: not neededown data sheet

Its 2 print profiles, in the documents' words

No temperature stated3DXTECH, Technical Data Sheet: ezPC™ Polycarbonate 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
Nozzle 255-275C; Bed 90-110C; Chamber Recommended; Drying 80C for 4+ hours, 4 h3DXTECH, ezPC™ POLYCARBONATEp. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs

Price

Not in the price sample.

1 listing: 1 with no regular price per kilogram recorded

3D Printing Canada: 104 per kg, sale priceDark Grey - 1.75mm 3DXTech ezPC™ (Polycarbonate) Filament - 0.75 kg (SKU PC005UN100750GY02)not used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 3 documents

What the maker says (1)

Printing adviceEase of use on a wide array of printers, no heated chamber needed!3DXTECH, ezPC™ POLYCARBONATEp. 1

3DXTECH Trilan PC Model MaterialStrength XY, MPa49.5Strength Z, MPa—Modulus XY, GPa1.95Charpy notched, kJ/m²—HDT 0.45, °C138HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h808 h

3DXTECH Trilan PC Model Material3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: Trilan™ PC Model Material8 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	1950 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	in the median
Tensile break strength XY	49.5 MPap. 1: Tensile Strength, Break ISO 527 MPa	ISO 527	in the median
Elongation at break XY	3.7 %p. 1: Tensile Elongation, Break	ISO 527	in the median
Flexural modulus XY	1910 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	in the median
Flexural strength XY	78 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	in the median
HDT at 0.45 MPa	138 °Cp. 1: Deflection Temperature at 0.45 MPa (66psi)	ISO 75 As the sheet prints it: ISO 75; 0.45 MPa	in the median
Glass transition temperature	160 °Cp. 1: Glass Transition Temperature DSC °C	no standard stated	in the median
Density	1.2 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183

Print settings

Nozzle: 260–280 °CBambu Lab Filament Guide
Bed: 90–110 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

3DXTECH, Technical Data Sheet: Trilan™ PC Model Material

SUNLU PCStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²35IzodHDT 0.45, °C101HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C100–110Chamber, °CnoneDrying, °C, h70–80

SUNLU PCSUNLU

Published values

Property	As published	Conditions	On the Overview
SUNLU, TECHNICAL DATA SHEET ISO PC10 valuesThe same values also in SUNLU, PC.Unless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	50 ± 3 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 150mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation	in the median
Elongation at break XY	25 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min %	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 150mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation	in the median
Flexural modulus XY	2050 ± 200 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 150mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation	in the median
Flexural strength XY	75 ± 3 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 150mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength XY	35 ± 5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 150mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength ZX	70 ± 5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 150mm/s; Printing temperature 260 °C; Infill: 100%; 90° raster orientation	not in the median: unnotched
Hardness	80 Shore Dp. 1: Shore Hardness ISO 868 23℃ HA/HDalso in SUNLU, PC	ISO 868 As the sheet prints it: 23℃ HA/HD ISO 868 tested at 23°C	in the median
HDT XY, at 0.45 MPa	101 ± 2 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
Density	1.15 g/cm3p. 1: Density ISO 1183 23℃ g/cm3also in SUNLU, PC	specimen not stated, ISO 1183 As the sheet prints it: 23℃ ISO 1183 tested at 23°C
Melt mass-flow rate	15 ± 5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 260℃/2.16 kg g/10 min	ISO 1133 As the sheet prints it: 260℃/2.16 kg ISO 1133 tested at 260°C
SUNLU, PC8 valuesUnless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	50 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa	ISO 527 As the sheet prints it: 50mm/min ISO527/2	not in the median: another value of this product is in it
Elongation at break XY	25 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min %	ISO 527 As the sheet prints it: 50mm/min ISO527/2	not in the median: another value of this product is in it
Flexural modulus XY	2050 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178	not in the median: another value of this product is in it
Flexural strength XY	77 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178	not in the median: another value of this product is in it
Izod impact strength XY	35 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2	ISO 180 As the sheet prints it: 23℃ ISO180 tested at 23°C	not in the median: another value of this product is in it
Izod impact strength ZX	75 KJ/m2p. 1: IZOD Impact Notched (Z-X) ISO180 23℃ KJ/m2	ISO 180 As the sheet prints it: Z-X 23℃ ISO180 tested at 23°C	not in the median: measured on a bar in another orientation
HDT at 0.45 MPa	101 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃	printed specimen (implied by the document), ISO 75 As the sheet prints it: 0.45MPa ISO75	not in the median: another value of this product is in it
Melt mass-flow rate	15 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min	specimen not stated, ISO 1133 As the sheet prints it: 190℃/2.16kg ISO1133 tested at 190°C

Print settings

Nozzle: 260–280 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 70–80 °Cown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle 260-280; Bed 100-110℃; Chamber Room Temperature; Drying 70-80℃SUNLU, TECHNICAL DATA SHEET ISO PCp. 2: Recommended printing settings; p. 2: Nozzle Temp.
Nozzle 260-280; Bed 100-110℃; Chamber 50-100℃; Drying 70-80℃SUNLU, PCp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Material

Price

Not in the price sample.

Its 3 documents

What the maker says (5)

Good for3C electronics, toys and decorative items, and functional parts.SUNLU, TECHNICAL DATA SHEET ISO PCp. 1
BenefitsHigh heat resistance and high toughness.SUNLU, TECHNICAL DATA SHEET ISO PCp. 1
Printing adviceEnclosed-chamber printing using LAC spray adhesive.SUNLU, TECHNICAL DATA SHEET ISO PCp. 1
Good for3C electronics, toy figurines, functional partsSUNLU, PCp. 1
BenefitsHigh heat resistance, high toughnessSUNLU, PCp. 1

Yousu PCStrength XY, MPa71Strength Z, MPa—Modulus XY, GPa2.41Charpy notched, kJ/m²—HDT 0.45, °C144HDT 1.8, °C121Price, CAD/kg—Nozzle, °C220–270Bed, °C100–110Chamber, °CenclosedDrying, °C, h808 h

Yousu PCYousu

Published values

Property	As published	Conditions	On the Overview
Yousu, Yousu PC 3D FILMAENT Technical Data Sheet19 values
Tensile modulus orientation not stated	2410 MPap. 1: Tensile Modulus	ASTM D638	in the median
Tensile yield strength orientation not stated	60 MPatranscription correctedp. 1: Tensile Strength MPa	no standard statedtested at 23 ℃	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	60 MPap. 1: Tensile Strength (60)	ASTM D638 As the sheet prints it: ASTM D638; yield tested at 23 ℃	not in the median: another value of this product is in it
Tensile break strength orientation not stated	71 MPap. 1: Tensile Strength (71)	ASTM D638 As the sheet prints it: ASTM D638; break tested at 23 ℃	in the median
Elongation at break orientation not stated	150 %p. 1: Tensile Elongation (150)	ASTM D638 As the sheet prints it: ASTM D638; break	in the median
Elongation at yield orientation not stated	6.0 %p. 1: Tensile Elongation (6.0)	ASTM D638 As the sheet prints it: ASTM D638; yield	listed under other properties
Flexural modulus orientation not stated	2.4 GPap. 1: Flexural Modulus GPa	no standard stated	in the median
Flexural strength orientation not stated	96 MPap. 1: Flexural Strength MPa	no standard stated	in the median
Izod impact strength orientation not stated	900 J/mp. 1: Impact Strength, IZOD notched	ASTM D256 As the sheet prints it: ASTM D256; thickness=3.20mm tested at 23℃	not in the median: in J/m
Hardness	73 Rockwell Rp. 1: Rockwell Hardness (R scale)	ASTM D785	listed under other properties
Hardness	118 Rockwell Mp. 1: Rockwell Hardness (M scale)	ASTM D785	listed under other properties
HDT at 0.45 MPa	144 ℃p. 1: Heat Deflection Temperature (Unannealed; 144)	ASTM D648 As the sheet prints it: ASTM D648; 0.45 MPa as printed Unannealed	in the median
HDT at 1.8 MPa	121 ℃p. 1: Heat Deflection Temperature (Unannealed; 121)	ASTM D648 As the sheet prints it: ASTM D648; 1.8 MPa as printed Unannealed	in the median
HDT at 1.8 MPa	141 ℃p. 1: Heat Deflection Temperature (Annealed; 141)	ASTM D648 As the sheet prints it: ASTM D648; 1.8 MPa annealed at a temperature its sheet does not state for a time its sheet does not state Annealed	not in the median: annealed; the as-printed value is in it
Vicat softening temperature	104 ℃p. 1: Vicat Softening Temperature	ASTM D1525
Density	1.20 g/cm3p. 1: Density ASTM D792 g/cm3 23 ℃	ASTM D792 As the sheet prints it: 23 ℃ ASTM D792 tested at 23°C
Water absorption	0.15 %p. 1: Water Absorption ASTM D570 % 23 ℃,24hr	ASTM D570 As the sheet prints it: 23 ℃ 24hr ASTM D570 tested at 23°C
Melt mass-flow rate	10 g/10minp. 1: Melt Flow Rate ASTM D1238 g/10min 300 ℃, 1.2Kg	ASTM D1238 As the sheet prints it: 300 ℃ 1.2Kg ASTM D1238 tested at 300°C
Dielectric strength	17 KV/mmp. 2: Dielectric Strength ASTM D149 KV/mm	ASTM D149

Print settings

Nozzle: 220–270 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: temperature not statedown data sheet

Its print profile, in the documents' words

Nozzle 220-270℃; Bed 100-110℃Yousu, Yousu PC 3D FILMAENT Technical Data Sheetp. 2: Recommended printing settings; p. 2: Bed Temp

Price

Not in the price sample.

Its 3 documents

What the maker says (12)

Moisture sensitivityPC 3D Printer filament is hygroscopic, therefore, be stored in a cool, dry place so as not to affect the quality.Yousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
BenefitsStrongest, longest-lasting, and most durable in commercial areasYousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
Good forPC is used for bullet-proof glass, dive masks, and screens.Yousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
BenefitsGood technical properties a high-temperature resistanceYousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
BenefitsImpact-resistantYousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
BenefitsHigh heat resistanceYousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
Surface finishNaturally transparentYousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
BenefitsBendable without breaking.Yousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
BenefitsTangle free winding to assure you a high success rate of 3d printing.Yousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
BenefitsUnique recipe – Make the filament less brittle and assure less stringing and better overhang performance.Yousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
Precision and tolerancePrecision diameter control.Yousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1
Surface finishAs a return, our consumers can get a smooth printing surface and fewer clogging issues.Yousu, YOUSU PC 3D Filament natural 1.75mm 2.85mm 1kgp. 1

Prusa Research Prusament PC Blend by Prusa PolymersStrength XY, MPa63Strength Z, MPa—Modulus XY, GPa1.9Charpy notched, kJ/m²12HDT 0.45, °C113HDT 1.8, °C93Price, CAD/kg—Nozzle, °C265–285Bed, °C100–120Chamber, °CenclosedDrying, °C, h808 h

Prusa Research Prusament PC Blend by Prusa PolymersPrusa Research

Published values

Property	As published	Conditions	On the Overview
Prusa Research, Technical datasheet Prusament PC Blend by Prusa Polymers18 values
Tensile modulus XY	1.9 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label))	ISO 527 As the sheet prints it: ISO 527-1	in the median
Tensile modulus XZ	2.0 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label))	ISO 527 As the sheet prints it: ISO 527-1	not in the median: measured on a bar in another orientation
Tensile yield strength XY	63 ± 1 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label))	ISO 527 As the sheet prints it: ISO 527-1	in the median
Tensile yield strength orientation not stated	58 ± 1 MPap. 2: Tensile Yield Strength for Filament [MPa]	ISO 527	not in the median: measured on a filament strand
Tensile yield strength XZ	63 ± 1 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label))	ISO 527 As the sheet prints it: ISO 527-1	not in the median: measured on a bar in another orientation
Elongation at yield XZ	5.8 ± 0.2 %p. 2: Elongation at Yield Point [%]	ISO 527 As the sheet prints it: ISO 527-1	listed under other properties
Flexural modulus XY	2.1 ± 0.1 GPap. 2: Flexural Modulus [GPa]	ISO 178	in the median
Flexural strength XZ	94 ± 2 MPap. 2: Flexural Strength [MPa]	ISO 178	not in the median: measured on a bar in another orientation
Charpy impact strength XY	12 ± 1 kJ/m²p. 2: Impact Strength Charpy Notched [kJ/m ](5) (Horizontal (source label))	ISO 179 As the sheet prints it: ISO 179-1	in the median
Charpy impact strength XZ	12 ± 1 kJ/m²p. 2: Impact Strength Charpy Notched [kJ/m ](5) (Vertical XZ (source label))	ISO 179 As the sheet prints it: ISO 179-1	not in the median: measured on a bar in another orientation
Hardness	79 Shore Dp. 2: Hardness – Shore D	no standard stated	in the median
Interlayer adhesion strength orientation not stated	21 ± 2 MPap. 2: Interlayer Adhesion [MPa]	no standard named As the sheet prints it: Prusa Polymers
HDT at 0.45 MPa	113 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C]	ISO 75 As the sheet prints it: ISO 75; 0.45 MPa	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	93 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C]	ISO 75 As the sheet prints it: ISO 75; 1.80 MPa	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.22 g/cm³p. 2: Density	no standard named As the sheet prints it: Prusa Polymers
Water absorption	0.13 %p. 2: Moisture Absorption in 24 hours [%](2)	no standard named As the sheet prints it: Prusa Polymers; time=24 hours; humidity=22 % tested at 24 °C
Water absorption	0.15 %p. 2: Moisture Absorption in 7 days [%](2)	no standard named As the sheet prints it: Prusa Polymers; time=7 days; humidity=22 % tested at 24 °C
Melt mass-flow rate	20–24 g/10 minp. 2: MFR [g/10 min](1)	ISO 1133 As the sheet prints it: ISO 1133; 5 kg tested at 265 °C

Print settings

Nozzle: 265–285 °Cown data sheet
Bed: 100–120 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle [°C] 275 ± 10; Bed [°C] 110 ± 10Prusa Research, Technical datasheet Prusament PC Blend by Prusa Polymersp. 1: Recommended printing settings: Nozzle Temperature; p. 1: Bed Type

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

Printing adviceUse a 4 mm brim for parts bigger than 5 cm.Prusa Research, Technical datasheet Prusament PC Blend by Prusa Polymersp. 1
Printing adviceDepends on the geometry of a printed object, to improve overhangs and bridges set 20 % or higher cooling in PrusaSlicer, for larger prints without bridges cooling off can work better.Prusa Research, Technical datasheet Prusament PC Blend by Prusa Polymersp. 1

Flashforge PCStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa1.8Charpy notched, kJ/m²4IzodHDT 0.45, °C123HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C100–120Chamber, °C40–70Drying, °C, h80≥ 12 h

Flashforge PCFlashforge

Published values

Property	As published	Conditions	On the Overview
Flashforge, Technical Data Sheet PC Filament10 values
Tensile modulus XY	1800-1950 Mpap. 1: Modulus of Elasticity(X-Y) ISO 527 Mpa	ISO 527 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Tensile strength (yield or break not stated) XY	40-45 Mpap. 1: Tensile Strength(X-Y) ISO 527 Mpa	ISO 527 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Elongation at break XY	7-9 %p. 1: Elongation at Break(X-Y) ISO 527 %	ISO 527 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Flexural strength XY	83-87 Mpap. 1: Bending Strength(X-Y) ISO 178 Mpa	ISO 178 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Izod impact strength XY	4-5.5 KJ/m2p. 1: Izod Impact Strength(X-Y) ISO 180 KJ/m2	ISO 180notched print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
HDT at 0.45 MPa	123 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃	ISO 75 As the sheet prints it: 0.455 MPa 66 psi ISO 75	in the median
Continuous service temperature	130 ℃p. 1: Continuous Service Temperature IEC 60216 ℃	IEC 60216
Density	1.2-1.21 g/cm3p. 1: Density ISO 1183 g/cm3	ISO 1183
Water absorption	0.8 %p. 1: Water Absorption (23℃/24h) ISO 62 %	ISO 62 As the sheet prints it: 23℃/24h ISO 62 tested at 23°C
Melt mass-flow rate	3-5 g/10minp. 1: Melt Index MFR (240℃/2.16Kg) ISO 1133 g/10min	ISO 1133 As the sheet prints it: 240℃/2.16Kg ISO 1133 tested at 240°C

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 100–120 °Cown data sheet
Heated chamber: 40–70 °Cown data sheet
Drying: 80 °C for ≥ 12 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240~260℃ (250℃ recommended); Bed 100~120℃ (110℃ recommended); Chamber 40~70℃; Drying Using a hot dry air oven at 80℃ for at least 12 hours is recommendedFlashforge, Technical Data Sheet PC Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Nozzle Diameter (recommended printing settings)

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

BenefitsPC has high tenacity, high strength and high heat resistance, with the ability to be printable on non-heated chamber FFF 3D printers.Flashforge, Technical Data Sheet PC Filamentp. 1
BenefitsHigh tenacity/High strength/High heat resistance.Flashforge, Technical Data Sheet PC Filamentp. 1
Supports and removalRecommended Support Material Self-supportingFlashforge, Technical Data Sheet PC Filamentp. 2
Printing adviceAfter the printing process, it is recommended to dry the model in the oven at 100°C for 1-3 hours to increase the strength of the model.Flashforge, Technical Data Sheet PC Filamentp. 3

Chemicals and environment (1)

Post-processing: described in wordsAfter the printing process, it is recommended to dry the model in the oven at 100°C for 1-3 hours to increase the strength of the model.Flashforge, Technical Data Sheet PC Filamentp. 3: Post-processing note

Polymaker PC MaxStrength XY, MPa59.7Strength Z, MPa—Modulus XY, GPa2.05Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h808 h

Polymaker PC MaxPolymaker

Published values

Property	As published	Conditions	On the Overview
Polymaker, Polymaker PC-Max™ Technical Data Sheet9 values
Tensile modulus XY	2048 ± 66 MPap. 1: Mechanical Properties, Young’s modulus; p. 2: Fig. 1 tensile / Fig. 2 flexural flat specimen, Z axis through thickness	ASTM D638, ISO 527, GB/T 1040 As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040) print settings All testing specimens were printed using a FlashForge Creator Pro under the following conditions: Printing temperature = 255 °C, printing speed = 60 mm/s, number of shells = 2, and 100% infill.	in the median
Tensile strength (yield or break not stated) XY	59.7 ± 1.8 MPap. 1: Mechanical Properties, Tensile strength; p. 2: Fig. 1 tensile / Fig. 2 flexural flat specimen, Z axis through thickness	ASTM D638, ISO 527, GB/T 1040 As the sheet prints it: ASTM D638 (ISO527, GB/T1040) print settings All testing specimens were printed using a FlashForge Creator Pro under the following conditions: Printing temperature = 255 °C, printing speed = 60 mm/s, number of shells = 2, and 100% infill.	in the median
Elongation at break XY	12.24 ± 1.44 %p. 1: Mechanical Properties, Elongation at break; p. 2: Fig. 1 tensile / Fig. 2 flexural flat specimen, Z axis through thickness	ASTM D638, ISO 527, GB/T 1040 As the sheet prints it: ASTM D638 (ISO527, GB/T1040) print settings All testing specimens were printed using a FlashForge Creator Pro under the following conditions: Printing temperature = 255 °C, printing speed = 60 mm/s, number of shells = 2, and 100% infill.	in the median
Flexural modulus XY	2044 ± 55 MPap. 1: Mechanical Properties, Bending modulus; p. 2: Fig. 1 tensile / Fig. 2 flexural flat specimen, Z axis through thickness	ASTM D790, ISO 178, GB/T 9341 As the sheet prints it: ASTM D790 (ISO 178, GB/T 9341) print settings All testing specimens were printed using a FlashForge Creator Pro under the following conditions: Printing temperature = 255 °C, printing speed = 60 mm/s, number of shells = 2, and 100% infill.	in the median
Flexural strength XY	94.1 ± 0.9 MPap. 1: Mechanical Properties, Bending strength; p. 2: Fig. 1 tensile / Fig. 2 flexural flat specimen, Z axis through thickness	ASTM D790, ISO 178, GB/T 9341 As the sheet prints it: ASTM D790 (ISO 178, GB/T 9341) print settings All testing specimens were printed using a FlashForge Creator Pro under the following conditions: Printing temperature = 255 °C, printing speed = 60 mm/s, number of shells = 2, and 100% infill.	in the median
Glass transition temperature	113 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min	DSC As the sheet prints it: DSC, 10 °C/min	in the median
Density	1.18 - 1.20 g/cm³p. 1: Physical Properties, Density (g/cm³ at 21.5 °C)	ASTM D792, ISO 1183, GB/T 1033 As the sheet prints it: ASTM D792 (ISO 1183, GB/T 1033) tested at 21.5 °C
Moisture content	≤ 0.1%p. 1: Moisture content (%) Thermogravimetric	no standard named As the sheet prints it: Thermogravimetric
Melt mass-flow rate	23 - 26 g/10 minp. 1: Physical Properties, Melt index, 300 °C / 1.2 kg	no standard named As the sheet prints it: 300 °C, 1.2 kg tested at 300 °C

Print settings

Nozzle: 260–280 °CBambu Lab Filament Guide
Bed: 90–110 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

No temperature statedPolymaker, Polymaker PC-Max™ Technical Data Sheetp. 1: the conditions the test specimens were printed under, which are not printing guidance

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

BenefitsIn addition to high printing quality, great mechanical strength and heat resistance, Polymaker PC-Max™ offers excellent impact strength and fracture toughness, making it the ideal choice for engineering applications.Polymaker, Polymaker PC-Max™ Technical Data Sheetp. 1
Odour and emissionsOdor / Almost odorlessPolymaker, Polymaker PC-Max™ Technical Data Sheetp. 1
Moisture sensitivityFor newly opened filaments; filaments may absorb higher levels of moisture during use.Polymaker, Polymaker PC-Max™ Technical Data Sheetp. 1: Physical Properties, note 1
Pitfalls and limitationsSolubility / Insoluble in waterPolymaker, Polymaker PC-Max™ Technical Data Sheetp. 1: Physical Properties, Solubility

FormFutura Kratos PCStrength XY, MPa61.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C139HDT 1.8, °C128Price, CAD/kg—Nozzle, °C250–290Bed, °C90–130Chamber, °CnoneDrying, °C, h7524 h

FormFutura Kratos PCFormFutura

Data sheet shared with Spectrum PC 275: their values are one table, recorded once.

Published values

No value is on file for this product.

Print settings

Nozzle: 250–290 °CSpectrum PC 275's data sheet, shared
Bed: 90–130 °CSpectrum PC 275's data sheet, shared
Heated chamber: not requiredown data sheet
Drying: 75 °C for 24 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Drying pre-dry the filament at 75°C for approximately 24 hours before usageFormFutura, TECHNICAL DATA SHEET Kratos PCp. 1: Pre-drying Kratos PC; p. 1: Enclosure recommended for large(r) prints

Price

Not in the price sample.

Its 2 documents

What the maker says (13)

Good for3D printing end-use parts.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Good forKratos PC is ideal for printing durable parts with a high impact strength.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Good for3D printing automotive parts.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
BenefitsIts improved flow rate enables this PC filament to 3D print at high speeds.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
BenefitsHigh resistance to dynamic loads.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Warping and shrinkageThe brim is advised to hold down the edges of your part, which can prevent warping and help improve bed adhesion.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Precision and toleranceIt 3D prints detailed parts with a high dimensional accuracy.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Adhesion between layersThis means low shrinkage plus increased bed- and layer adhesion.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Moisture sensitivityKratos PC is a hygroscopic filament and therefore it is necessary to pre-dry the filament at 75°C for approximately 24 hours before usage.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Moisture sensitivityFor optimal print results we recommend to print Kratos PC filament from a drying box to avoid that the material can accumulate humidity from the environment.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Printing adviceFor optimal buildplate adhesion we recommend to use a dedicated PC buildplate adhesive and to print a brim around your model.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Printing adviceKratos PC can be 3D printed on open printers without a closed chamber for small(er) parts.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1
Printing adviceFor large(r) parts we de recommend to use a 3D printer with closed chamber.FormFutura, TECHNICAL DATA SHEET Kratos PCp. 1

Spectrum PC 275Strength XY, MPa61.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C139HDT 1.8, °C128Price, CAD/kg—Nozzle, °C250–290Bed, °C90–130Chamber, °CenclosedDrying, °C, h120≥ 5 h

Spectrum PC 275Spectrum

Data sheet shared with FormFutura Kratos PC: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET PC 2759 valuesThe same values also in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO.Unless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	630 kg/cm2p. 1: Tensile Strength at Yield*	ASTM D638 As the sheet prints it: D 638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	100 %p. 1: Tensile Elongation at Break*	ASTM D638 As the sheet prints it: D 638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	24 000 kg/cm2 (TDS prints "24.000" with European decimal separator)p. 1: Flexural Modulus**	ASTM D790 As the sheet prints it: D 790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	920 kg/cm2p. 1: Flexural Strength**	ASTM D790 As the sheet prints it: D 790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	70 kg∙cm/cmp. 1: Izod Impact Strength, Notched @ 23°C	ASTM D256 As the sheet prints it: 23°C D 256 tested at 23°C	not in the median: in J/m
HDT at 0.45 MPa	139 °Cp. 1: Heat Deflection Temperature 0.45mn/m2also in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO	ASTM D648 As the sheet prints it: 0.45mn/m2 D 648	in the median
HDT at 1.8 MPa	128 °Cp. 1: Heat Deflection Temperature 1.81mn/m2	ASTM D648 As the sheet prints it: 1.81mn/m2 D 648	in the median
Vicat softening temperature	150 °Cp. 1: Vicat Softening Temperature	ASTM D1525 As the sheet prints it: D 1525
Density	1.20 g/cm3p. 1: Specific Gravity	ASTM D792 As the sheet prints it: D 792
FormFutura, TECHNICAL DATA SHEET Kratos PC1 value
Izod impact strength orientation not stated	70 kg·cm/cmp. 1: Izod Notched Impact Strength (23°C)	ASTM D256tested at 23°C	not in the median: in J/m

Print settings

Nozzle: 250–290 °Cown data sheet
Bed: 90–130 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 120 °C for ≥ 5 hown data sheet
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 250 - 290°C; Bed 90 - 130°C; Drying Drying (if wet) recommended; at least 5h at 120°C using a hot dry air ovenSpectrum, TECHNICAL DATA SHEET PC 275p. 1: Recommended printing settings; p. 1: Drying (if wet) ***; p. 1: Nozzle note; p. 1: * settings are based on a 0.5mm nozzle
Nozzle 250-290 °C; Bed 90-130 °CSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Dry box recommended; p. 4: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 24: Dry box recommended; p. 24: Ruby or hardened nozzle recommended; p. 25: Adhesive

Price

Not in the price sample.

1 listing: 1 with no regular price per kilogram recorded

3D Printing Canada: 45 per kg, sale priceTraffic White - Spectrum PC 275 Filament - 1.75mm, 1kg (SKU 5905991400066)not used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 5 documents

What the maker says (7)

BenefitsAbility to print at high speedsSpectrum, TECHNICAL DATA SHEET PC 275p. 1
Warping and shrinkageDimensional stabilitySpectrum, TECHNICAL DATA SHEET PC 275p. 1
Warping and shrinkageReduced shrinkage effectSpectrum, TECHNICAL DATA SHEET PC 275p. 1
Precision and tolerancePC 275 is a professional, high-class filament offering exceptional stability and precision during printing, even at high speeds, thanks to its improved composition.Spectrum, TECHNICAL DATA SHEET PC 275p. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET PC 275p. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET PC 275p. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET PC 275p. 1

SIDDAMENT PCStrength XY, MPa55Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²35IzodHDT 0.45, °C117HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h802–4 h

SIDDAMENT PCSIDDAMENT

Published values

Property	As published	Conditions	On the Overview
SIDDAMENT, PC - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated
Tensile strength (yield or break not stated) orientation not stated	55 MPap. 1: Tensile Strength ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	3.8 %p. 1: Elongation at Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2310 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	108 MPap. 1: Bending Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	35 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2	ISO 180	not in the median: set apart (never used to pass), test bar not described as printed
HDT	117 °Cp. 1: Heat Deflection ISO 75 °C	ISO 75	not in the median: set apart (never used to pass), no stated test load
Density	1.2 g/cm3p. 1: Density ISO 1183 g/cm3	ISO 1183
Water absorption	0.4 %p. 1: Water Absorption ISO 62 %	ISO 62

Print settings

Nozzle: 260–280 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 2–4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 260-280°C; Bed 90-110°C; Drying If damp, dry at 80°C for 2-4 hours.SIDDAMENT, PC - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Supports and removalSupporting Material: Self-supporting, PVASIDDAMENT, PC - Technical Datasheetp. 2

Nanovia PC V0Strength XY, MPa90Strength Z, MPa—Modulus XY, GPa2.17Charpy notched, kJ/m²—HDT 0.45, °C144HDT 1.8, °C133Price, CAD/kg—Nozzle, °C270–290Bed, °C100–140Chamber, °C≥ 100Drying, °C, h1006 h

Nanovia PC V0Nanovia

Published values

Property	As published	Conditions	On the Overview
Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanovia9 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2165 MPap. 1: Young’s modulus	printed specimen, ISO 527 As the sheet prints it: ISO 527-2/1A print settings Test performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress.	not in the median: set apart (never used to pass), no stated orientation
Tensile yield strength orientation not stated	90 MPap. 1: Strength at yield	printed specimen (implied by the document), ASTM D638	in the median
Flexural modulus orientation not stated	2160 MPap. 1: Module de Young	printed specimen (implied by the document), ASTM D790	in the median
HDT at 0.45 MPa	144 °Cp. 1: HDT	ASTM D648 As the sheet prints it: D648 @ 4.6 kg/cm 2	in the median
HDT at 1.8 MPa	133 °Cp. 1: HDT, its second line	ASTM D648 As the sheet prints it: D648 @ 18.6 kg/cm 2	in the median
Density	1.20 g/cm3p. 1: Density	ASTM D792
Water absorption	0.15 %p. 1: Water absorption	ASTM D570
Melt mass-flow rate	10 g/10minp. 1: MFI	ASTM D1238 As the sheet prints it: ASTM D1238; 1.2 kg tested at 300°C
Dielectric strength	30 kV/mmp. 1: Dielectric strength	ASTM D149

Print settings

Nozzle: 270–290 °Cown data sheet
Bed: 100–140 °Cown data sheet
Heated chamber: at least 100 °Cown data sheet
Drying: optional: 100 °C for 6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 270 – 290 °C; Bed 100 – 140 °C; Chamber > 100 °C; Drying Dehydrate for 6 h at 100 °C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanoviap. 1: Recommended printing settings; p. 1: Drying note

Price

Not in the price sample.

Its 2 documents

What the maker says (6)

Good forThis natively translucent polymer allows for the creation of component useable up to 140 °C subjected to high mechanical wear and prone to harsh impacts.Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanoviap. 1
Good forIdeal for the creation of molds for composite infusion, pre impregnated or even AFP draping.Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanoviap. 1
BenefitsGreat fire resistance V0Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanoviap. 1
BenefitsNanovia PC V0 is a fire resistant FFF polycarbonate filament certified V-O at 3mm by the UL94 rating.Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanoviap. 1
Pitfalls and limitationsFor an outdoor usage, it’s recommended either paint or apply a protective UV coating, to prevent the polycarbonate from hydrolyzing and yellowing.Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanoviap. 1
Warping and shrinkageWarping 0.5 – 0.7 %Nanovia, Nanovia PC V0 : Non-flammable UL94 VO : Nanoviap. 1

Stratasys PCStrength XY, MPa—Strength Z, MPa53.1Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C144HDT 1.8, °C141Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h808 h

Stratasys PCStratasys

Published values

Property	As published	Conditions	On the Overview
Stratasys, MATERIAL DATA SHEET PC55 valuesUnless a row says otherwise: printed specimen
Tensile modulus Z (ZX)	2.88 (0.07) GPap. 8: Modulus (Elastic) (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	in the median
Tensile modulus Z (ZX)	2.01 (0.034) GPap. 11: Modulus (Elastic) (ZX; Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile modulus Z (ZX)	2.07 (0.024) GPap. 11: Modulus (Elastic) (ZX; Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile modulus Z (ZX)	1.91 (0.036) GPap. 12: Modulus (Elastic) (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile modulus XZ	2.94 (0.05) GPap. 8: Modulus (Elastic) (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile modulus XZ	1.93 (0.018) GPap. 11: Modulus (Elastic) (XZ; Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile modulus XZ	1.95 (0.021) GPap. 11: Modulus (Elastic) (XZ; Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile modulus XZ	1.92 (0.026) GPap. 12: Modulus (Elastic) (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile yield strength Z (ZX)	53.1 (4.1) MPap. 8: Yield Strength (ZX; ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	in the median
Tensile yield strength Z (ZX)	43 (5.1) MPap. 11: Yield Strength (ZX; Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile yield strength Z (ZX)	37.1 (2.3) MPap. 11: Yield Strength (ZX; Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile yield strength Z (ZX)	45.3 (4.9) MPap. 12: Yield Strength (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile yield strength XZ	93.9 (2.15) MPaphysically implausiblep. 8: Yield Strength (XZ; ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: physically implausible as published
Tensile yield strength XZ	64.6 (0.44) MPap. 11: Yield Strength (XZ; Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	62.5 (0.67) MPap. 11: Yield Strength (XZ; Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	62.3 (0.46) MPap. 12: Yield Strength (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile break strength Z (ZX)	52.6 (4.0) MPap. 8: Strength @ Break (ZX; ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	44.5 (5.8) MPap. 11: Strength @ Break (ZX; Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	36.9 (2.4) MPap. 11: Strength @ Break (ZX; Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	45.3 (4.9) MPap. 12: Strength @ Break (ZX)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: another value of this product is in it
Tensile break strength XZ	54.1 (11) MPap. 8: Strength @ Break (XZ; ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile break strength XZ	61.0 (2.3) MPap. 11: Strength @ Break (XZ; Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Black; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile break strength XZ	61.7 (0.97) MPap. 11: Strength @ Break (XZ; Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; printer=Fortus 450mc; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Tensile break strength XZ	54.4 (2.4) MPap. 12: Strength @ Break (XZ)	ASTM D638 As the sheet prints it: ASTM D638; printer=F900; tip=T16; colour=Red; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Elongation at break Z	1.9 %	ASTM D638 print settings 0.25 mm (0.010 in.) layer height on the F900	in the median
Elongation at break Z	2.5 (0.39) %p. 11: Elongation @ Break % (Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.39	not in the median: another value of this product is in it
Elongation at break Z	1.9 (0.13) %p. 11: Elongation @ Break % (Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.13	not in the median: another value of this product is in it
Elongation at break Z	2.8 (0.41) %	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.41	not in the median: another value of this product is in it
Elongation at break XZ	12 %p. 8: Elongation @ Break %	ASTM D638 print settings Table 4: PC White Mechanical Properties - F900 - T16 Tip · 0.25 mm (0.010 in.) Layer Height	not in the median: measured on a bar in another orientation
Elongation at break XZ	6.4 %p. 11: Elongation @ Break % (Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16, XZ Orientation)	ASTM D638 print settings Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16 · 0.25 mm (0.010 in.) Layer Height	not in the median: measured on a bar in another orientation
Elongation at break XZ	7.6 %p. 12: Elongation @ Break %	ASTM D638 print settings Table 10: Mechanical Properties of PC Red, F900, T16 · 0.25 mm (0.010 in.) Layer Height	not in the median: measured on a bar in another orientation
Elongation at break XZ	4.9 (0.24) %p. 11: Elongation @ Break % (Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16, XZ Orientation)	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.24 print settings Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16 · 0.25 mm (0.010 in.) Layer Height	not in the median: measured on a bar in another orientation
Elongation at yield Z	1.9 %	ASTM D638 print settings 0.25 mm (0.010 in.) layer height on the F900	listed under other properties
Elongation at yield Z	2.4 (0.36) %p. 11: Elongation @ Yield % (Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.36	listed under other properties
Elongation at yield Z	1.9 (0.13) %p. 11: Elongation @ Yield % (Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16)	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.13	listed under other properties
Elongation at yield Z	2.8 (0.41) %	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.41	listed under other properties
Elongation at yield XZ	4.8 %p. 8: Elongation @ Yield %	ASTM D638 print settings Table 4: PC White Mechanical Properties - F900 - T16 Tip · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Elongation at yield XZ	5.3 %p. 11: Elongation @ Yield % (Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16, XZ Orientation)	ASTM D638 print settings Table 8: Mechanical Properties of PC Black, Fortus 450mc, T16 · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Elongation at yield XZ	5.5 %p. 12: Elongation @ Yield %	ASTM D638 print settings Table 10: Mechanical Properties of PC Red, F900, T16 · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Elongation at yield XZ	4.8 (0.2) %p. 11: Elongation @ Yield % (Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16, XZ Orientation)	ASTM D638 As the sheet prints it: ASTM D638; std dev=0.2 print settings Table 9: Mechanical Properties of PC Red, Fortus 450mc, T16 · 0.25 mm (0.010 in.) Layer Height	listed under other properties
Flexural modulus XZ	3.43 (0.09) GPap. 8: Modulus (XZ)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Flexural modulus ZX	2.80 (0.06) GPap. 8: Modulus (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: measured on a bar in another orientation
Flexural strength ZX	85.3 (14) MPap. 8: Strength @ Break (ZX; ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; colour=White; layer_height=0.25 mm; endpoint=break	not in the median: measured on a bar in another orientation
Flexural elongation at break ZX	3.1 %p. 8: Strain @ Break	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	listed under other properties
Flexural stress at conventional deflection XZ	144 (4.6) MPap. 8: Strength @ 5% Strain	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; printer=F900; tip=T16; colour=White; layer_height=0.25 mm; strain=5%	listed under other properties
Izod impact strength XZ	45.8 (5.9) J/mp. 8: Notched (XZ)	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength ZX	30.7 (4.4) J/mp. 8: Notched (ZX)	ASTM D256, ASTM D4812	not in the median: in J/m
Izod impact strength XZ	1,930 (950) J/mp. 8: Unnotched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: in J/m
Izod impact strength ZX	143.2 (32) J/mp. 8: Unnotched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; colour=White; layer_height=0.25 mm	not in the median: in J/m
Compression strength XZ	106 (3.3) MPap. 8: Yield Strength (XZ; ASTM D695)	ASTM D695 As the sheet prints it: ASTM D695; printer=F900; tip=T16; colour=White; layer_height=0.25 mm; endpoint=yield
Compression strength ZX	106 (3.1) MPap. 8: Yield Strength (ZX; ASTM D695)	ASTM D695 As the sheet prints it: ASTM D695; printer=F900; tip=T16; colour=White; layer_height=0.25 mm; endpoint=yield
HDT XY, at 0.45 MPa	144.0 °Cp. 6: HDT @ 66 psi	ASTM D648 As the sheet prints it: 66 psi ASTM D648 print settings Table 3: PC Physical Properties · Property Test Method · XY column	in the median
HDT XY, at 1.8 MPa	140.7 °Cp. 6: HDT @ 264 psi	ASTM D648 As the sheet prints it: 264 psi ASTM D648 print settings Table 3: PC Physical Properties · Property Test Method · XY column	in the median
HDT XZ, at 1.8 MPa	141.1 °C (286.0 °F)	ASTM D648 As the sheet prints it: ASTM D648 Method B; 264 psi	not in the median: measured on a bar in another orientation
Glass transition temperature	142.5 °C (288.6 °F)p. 6: Tg	moulded bar (resin supplier's value), ASTM D7426 As the sheet prints it: ASTM D7426 Inflection Point	not in the median: the resin supplier's value, not a printed part

Print settings

Nozzle: 260–280 °CBambu Lab Filament Guide
Bed: 90–110 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

Stratasys, MATERIAL DATA SHEET PC

What the maker says (2)

Good forThese attributes make it a good choice for 3D printed prototypes, parts and tools that demand higher material properties than ABS or ASA.Stratasys, MATERIAL DATA SHEET PCp. 2
BenefitsPC is characterized by its high strength and impact resistance, coupled with dimensional stability and heat resistance.Stratasys, MATERIAL DATA SHEET PCp. 2

Fabru Polycarbonat (PC)Strength XY, MPa60Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C141Price, CAD/kg—Nozzle, °C290–320Bed, °C120–150Chamber, °CenclosedDrying, °C, h1203–5 h

Fabru Polycarbonat (PC)Fabru

Published values

Property	As published	Conditions	On the Overview
Fabru, Polycarbonat (PC)9 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2300 MPap. 1: Tensile modulus (ISO 527-2/50)	ISO 527 As the sheet prints it: ISO 527-2/50	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	60 MPap. 1: Yield stress (ISO 527-2/50)	ISO 527 As the sheet prints it: ISO 527-2/50	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	150 %p. 1: Elongation at break (ISO 527-2/50)	ISO 527 As the sheet prints it: ISO 527-2/50	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	6 %p. 1: Elongation at yield (ISO 527-2/50)	ISO 527 As the sheet prints it: ISO 527-2/50	listed under other properties
HDT at 1.8 MPa	141 °Cp. 1: Heat deflection temperature	ISO 75 As the sheet prints it: 1.8 MPa (ISO 75-2/A)	in the median
Vicat softening temperature	149 °Cp. 1: Vicat softening temperature A	no standard stated
Density	1.20 g/cm3p. 1: Density (ISO 1183)	ISO 1183
Melt mass-flow rate	10 g/10minp. 1: MFR (ISO 1133)	ISO 1133
Mould shrinkage orientation not stated	0.5-0.7 %p. 1: Shrinkage (ISO 1183/A)	ISO 1183 As the sheet prints it: ISO 1183/A

Print settings

Nozzle: 290–320 °Cown data sheet
Bed: 120–150 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 120 °C for 3–5 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 290-320 °C; Bed 120-150 °C; Drying 120 °C | 3-5 hFabru, Polycarbonat (PC)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time

Price

Not in the price sample.

Its 2 documents

What the maker says (6)

BenefitsIn addition to the high print quality, the high mechanical strength and the heat resistance, the PC offers excellent impact strength and fracture toughness and is therefore the ideal choice for technical applications.Fabru, Polycarbonat (PC)p. 1
Pitfalls and limitationsCaution is required with regard to stress cracks, the effects of hot water and acids / alkalis such as acetone.Fabru, Polycarbonat (PC)p. 1
Pitfalls and limitationsThe component can then become very brittle and break or shatter without warning.Fabru, Polycarbonat (PC)p. 1
Pitfalls and limitationsPC is prone to stress crackingFabru, Polycarbonat (PC)p. 1
Pitfalls and limitationsPC is notch sensitiveFabru, Polycarbonat (PC)p. 1
Pitfalls and limitationsPC is not resistant to strong acids and alkalis, aromatic and chlorinated hydrocarbons and long-term exposure to hot waterFabru, Polycarbonat (PC)p. 1

Stratasys PC-ISOStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C133HDT 1.8, °C127Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h808 h

Stratasys PC-ISOStratasys

Published values

Property	As published	Conditions	On the Overview
Stratasys, PC-ISO Data Sheet10 values
Tensile modulus XZ	2,000 MPap. 1: Tensile Modulus (Type 1,0.125”, 0.2”/min) ASTM D638	ASTM D638 As the sheet prints it: Type 1 0.125” 0.2”/min ASTM D638	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) XZ	57 MPap. 1: Tensile Strength (Type 1,0.125”, 0.2”/min) ASTM D638	ASTM D638 As the sheet prints it: Type 1 0.125” 0.2”/min ASTM D638	not in the median: measured on a bar in another orientation
Flexural modulus XZ	2,100 MPap. 1: Flexural Modulus (Method 1,0.05”/min) ASTM D790	ASTM D790 As the sheet prints it: Method 1 0.05”/min ASTM D790	not in the median: measured on a bar in another orientation
Flexural strength XZ	90 MPap. 1: Flexural Strength (Method 1,0.05”/min) ASTM D790	ASTM D790 As the sheet prints it: Method 1 0.05”/min ASTM D790	not in the median: measured on a bar in another orientation
Izod impact strength orientation not stated	86 J/mp. 1: IZOD Impact, notched (Method A, 23 °C)	ASTM D256tested at 23 °C	not in the median: in J/m
HDT at 0.45 MPa	133 °Cp. 1: Heat Deflection (HDT) @ 66 psi	ASTM D648 As the sheet prints it: ASTM D648; 66 psi	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	127 °Cp. 1: Heat Deflection (HDT) @ 264 psi	ASTM D648 As the sheet prints it: ASTM D648; 264 psi	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	161 °Cp. 1: Glass Transition (Tg) DMA (SSYS)	no standard stated	in the median
Vicat softening temperature	139 °Cp. 1: Vicat Softening	ISO 306
Relative permittivity	3.0 - 2.8p. 1: Dielectric Constant	ASTM D150 As the sheet prints it: ASTM D150-98; orientation=flat vs vertical plaques (range)

Print settings

Nozzle: 260–280 °CBambu Lab Filament Guide
Bed: 90–110 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

Stratasys, PC-ISO Data Sheet

What the maker says (3)

Good forPC-ISO is commonly used in food and drug packaging and medical device manufacturing because of the material’s strength and medical compatibility.Stratasys, PC-ISO Data Sheetp. 1
Good forWhen combined with a Fortus® 3D Printer, PC-ISO gives you parts that can be used for conceptual modeling, functional prototyping, and production parts.Stratasys, PC-ISO Data Sheetp. 1
BenefitsPC-ISO (polycarbonate-ISO), an industrial thermoplastic, which in its raw state, is biocompatible (ISO 10993 USP Class VI)* and can be gamma or EtO sterilized.Stratasys, PC-ISO Data Sheetp. 1

Values are for the colour each sheet tested; pigment can change them.

Reference specimens and studies

A resin or study specimen, not a product you can buy.

Stratasys 355-02210 (PC)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h808 h

Stratasys 355-02210 (PC)Stratasys

A resin or study reference, not a product you can buy.

Published values

Property	As published	Conditions
Rodrigues et al., Polymers 18(2), 302, Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)10 valuesUnless a row says otherwise: printed specimentested at Room temperature print settings Stratasys Fortus 450; XY; 0.254 mm layer; 100% infill; ±45° raster; nozzle 275°C, bed 110°C; ASTM D638-03 specimen ~5.2 mm thick; sinusoidal tension, 10 Hz, R=0.05; sigma_max=21.35 MPa, sigma_min=1.07 MPa, amplitude=10.14 MPa.
Fatigue life XY	3368 cyclesp. 6: Fatigue table specimen 1	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	11,269 cyclesp. 6: Fatigue table specimen 2	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	182,224 cyclesp. 6: Fatigue table specimen 3	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	1,000,000 cyclesp. 6: Fatigue table specimen 4	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	1,000,000 cyclesp. 6: Fatigue table specimen 5	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	220,112 cyclesp. 6: Fatigue table specimen 6	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	834,070 cyclesp. 6: Fatigue table specimen 7	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	520,942 cyclesp. 6: Fatigue table specimen 8	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	299,132 cyclesp. 6: Fatigue table specimen 9	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	600,516 cyclesp. 6: Fatigue table specimen 10	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles

Print settings

Nozzle: 260–280 °CBambu Lab Filament Guide
Bed: 90–110 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

Rodrigues et al., Polymers 18(2), 302, Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)