ASA-GF
6 products from 6 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
6 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- hardened nozzle
- not published
How the numbers are worked out
IPCON ASA GFStrength XY, MPa39Strength Z, MPa28Modulus XY, GPa2.76Charpy notched, kJ/m²—HDT 0.45, °C98HDT 1.8, °C—Price, CAD/kg—Nozzle, °C265–290Bed, °C90–110Chamber, °CnoneDrying, °C, h70–904–8 h
IPCON ASA GFIPCON
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| IPCON, IPCON ASA GF Technical Data Sheet19 values | |||
| Tensile modulus XY | 2758 MPaMechanical properties: Young's Modulus XY | ISO 527, GB/T 1040print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Tensile modulus Z | 2156 MPaMechanical properties: Young's Modulus Z | ISO 527, GB/T 1040print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Tensile strength (yield or break not stated) XY | 39 MPaMechanical properties: Tensile Strength XY | ISO 527, GB/T 1040print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Tensile strength (yield or break not stated) Z | 28 MPaMechanical properties: Tensile Strength Z | ISO 527, GB/T 1040print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Elongation at break XY | 5.8 %Mechanical properties: Breaking Elongation Rate XY | ISO 527, GB/T 1040print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Elongation at break Z | 2.1 %Mechanical properties: Breaking Elongation Rate Z | ISO 527, GB/T 1040print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Flexural modulus XY | 2758 MPaMechanical properties: Flexural Modulus XY | ISO 178, GB/T 9341print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Flexural modulus Z | 2156 MPaMechanical properties: Flexural Modulus Z | ISO 178, GB/T 9341print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Flexural strength XY | 76 MPaMechanical properties: Flexural Strength XY | ISO 178, GB/T 9341print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Flexural strength Z | 49 MPaMechanical properties: Flexural Strength Z | ISO 178, GB/T 9341print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | in the median |
| Charpy impact strength XY | 23.5 kJ/m²Mechanical properties: Impact Strength XY | ISO 179, GB/T 1043print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | not in the median: notch not stated |
| Charpy impact strength Z | 8.2 kJ/m²Mechanical properties: Impact Strength Z | ISO 179, GB/T 1043print settingsPrinted by IPCON on a Bambu P1S: 275 °C nozzle, 100 °C bed, 155 mm/s XY and 147 mm/s Z, 100% concentric infill, Matte Blue | not in the median: notch not stated |
| Hardness orientation not stated | Shore hardness 80D Shore DFilament's properties: Surface Hardness | no standard namedAs the sheet prints it: Shore hardness | in the median |
| HDT at 0.45 MPa | 98 °CFilament's properties: Heat deflection temperature | ISO 75As the sheet prints it: ISO 75, 0.45 MPa | in the median |
| Vicat softening temperature | 107 °CFilament's properties: Vicat softening temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 221 °CFilament's properties: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.11 g/cm³Filament's properties: Density | ISO 1183As the sheet prints it: ISO 1183-3 | |
| Water absorption | 0.31 %Filament's properties: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: Saturated water absorption rate, 25 °C, 55% RH, room air | |
| Melt mass-flow rate | 19.5 g/10 minFilament's properties: Melt Index | no standard namedAs the sheet prints it: 270 °C, 2.16 kg | |
Print settings
- Nozzle
- 265–290 °Cown data sheet
- Bed
- 90–110 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 70–90 °C for 4–8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 265-290 °C; Bed 90-110 °C; Chamber Not required (TDS: no need for positive chamber heating); Drying 70-90 °C, 4-8 h (blast drying oven)IPCON, IPCON ASA GF Technical Data SheetRecommended Printing Settings
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Warping and shrinkage
Shrinkage Rate* Specially-defined 0.13% - 0.37%
IPCON, IPCON ASA GF Technical Data Sheetp. 1 - Good for
Garden plant pots, camping tool boxes, corridor lamps, bird cages, surfboard parts, swimming pool pipe fittings, weather monitor covers, ship parts, aircraft models, ship models and other items that are used in outdoor and water environments or require lightweight and high rigidity.
IPCON, IPCON ASA GF Technical Data Sheetp. 2 - Warping and shrinkage
ultra-low warpage (no need for positive chamber heating), excellent dimensional stability and surface quality
IPCON, IPCON ASA GF Technical Data Sheetp. 2 - Nozzle wear
Compatible Nozzle Material Hardened steel, diamond, tungsten carbide, etc
IPCON, IPCON ASA GF Technical Data Sheetp. 2 - Supports and removal
Compatible Support Material Itself or support filament for ASA
IPCON, IPCON ASA GF Technical Data Sheetp. 2 - Printing advice
Compatible Printer Type Enclosed-frame (recommended), open-frame
IPCON, IPCON ASA GF Technical Data Sheetp. 2
Chemicals and environment (1)
- UV and outdoor: described in words
Top UV resistance, and weather resistance, outstanding wate rand heat resistance, low density, high rigidity
UV / weatherIPCON, IPCON ASA GF Technical Data Sheetp. 2
Eryone ASA - GFStrength XY, MPa34.2Strength Z, MPa21.2Modulus XY, GPa1.86Charpy notched, kJ/m²—HDT 0.45, °C86HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C90–100Chamber, °CnoneDrying, °C, h75–856 h
Eryone ASA - GFEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) ASA - GF13 values | |||
| Tensile modulus XY | 1857.9 MPap. 2: Tensile modulus X-Y 50mm/min MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 1593.1 MPap. 2: Tensile modulus X-Z 50mm/min MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 34.2 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 21.2 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z | 2.1 %p. 2: Elongation at breakX-Z 50mm/min GB/T 1040.2 % | GB/T 1040.2As the sheet prints it: 50mm/min GB/T 1040.2print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 2623.5 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 54.3 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Charpy impact strength | 9.6 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1043.1-2008 kJ/m2 | GB/T 1043.1As the sheet prints it: 2.75J GB/T 1043.1-2008print settingsprinting temperature=270 ° C, printing speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm | not in the median: notch not stated |
| HDT at 0.45 MPa | 86 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 104 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | DSCAs the sheet prints it: ° C DSC | in the median |
| Density | 1.17 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 10 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
| Fibre content | 10% fiberglassp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 260–280 °Cown data sheet
- Bed
- 90–100 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 75–85 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 260℃-280℃; Bed 90-100℃; Drying 75-85℃, 6hEryone, Technical Data Sheet (TDS) ASA - GFp. 1: Recommended printing settings; p. 1: Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
This material is ideal for applications requiring specific strength or weather resistance in end-use products, such as automotive interior components, garden furniture, and outdoor leisure structures.
Eryone, Technical Data Sheet (TDS) ASA - GFp. 1 - Benefits
Eryone ASA-GF is an easy-to-print 3D printing material characterized by high strength, high rigidity, weather resistance, anti-yellowing, aging resistance, and corrosion resistance.
Eryone, Technical Data Sheet (TDS) ASA - GFp. 1 - Warping and shrinkage
It is designed for easy shaping, with a low tendency to crack or warp, and supports open printing environments.
Eryone, Technical Data Sheet (TDS) ASA - GFp. 1 - Surface finish
The printed parts are robust and feature a matte, frosted surface texture.
Eryone, Technical Data Sheet (TDS) ASA - GFp. 1 - Printing advice
Sealed printing supports open printing, and the sealing effect is better if it is sealed
Eryone, Technical Data Sheet (TDS) ASA - GFp. 1
Extrudr DURAPRO ASA GFStrength XY, MPa54Strength Z, MPa—Modulus XY, GPa3.1Charpy notched, kJ/m²8HDT 0.45, °C95HDT 1.8, °C85Price, CAD/kg—Nozzle, °C230–270Bed, °C110Chamber, °C—Drying, °C, h6512 h
Extrudr DURAPRO ASA GFExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, DURAPRO ASA GF official maker product page19 values | |||
| Tensile modulus orientation not stated | 3100 MPap. 1: Tensile modulus (Young's modulus) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 54 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 51 MPap. 1: Tensile stress at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 3 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 3000 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 80 MPap. 1: Flexural strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 5 kJ/m²p. 1: Charpy notched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eA; notched | not in the median: tested below room temperature |
| Charpy impact strength orientation not stated | 30 kJ/m²p. 1: Charpy unnotched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eU; unnotched | not in the median: unnotched |
| Charpy impact strength orientation not stated | 22 kJ/m²p. 1: Charpy unnotched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eU; unnotched | not in the median: unnotched |
| Charpy impact strength orientation not stated | 8 kJ/m²p. 1: Charpy notched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 95 °Cp. 1: Heat deflection temp. (HDT/B) — 0.45 MPa | ISO 75As the sheet prints it: ISO 75-1; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 85 °Cp. 1: Heat deflection temp. (HDT/A) — 1.8 MPa | ISO 75As the sheet prints it: ISO 75-1; 1.8 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 103 °Cp. 1: Glass transition temp. (Tg) | ISO 11357As the sheet prints it: ISO 11357-1 (DSC) | in the median |
| Vicat softening temperature | 97 °Cp. 1: Vicat softening temp. (VST/B50) | ISO 306 | |
| Decomposition temperature | 350 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Density | 1.14 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Water absorption | 0.8 %p. 1: Water absorption (saturation, 23°C) | no standard namedAs the sheet prints it: saturation | |
| Melt mass-flow rate | 3 g/10 minp. 1: Melt flow rate (MFR) — 210°C/2.16 kg | ISO 1133As the sheet prints it: ISO 1133-1 (210°C/2.16 kg) | |
| Melt volume-flow rate | 15 cm³/10 minp. 1: Melt volume rate (MVR) — 235°C/5.0 kg | no standard namedAs the sheet prints it: 5.0 kg | |
| Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GF11 valuesThe same values also in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile yield strength | 60-66 MPap. 1: Tensile Strength at Yield ISO 527 MPaalso in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 5–8 %, (Min)p. 1: Tensile Elongation at Break | specimen not stated; its document points to a moulded or resin bar, ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus | 2900-3300 MPap. 1: Flexural Modulus ISO 178 MPaalso in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength | 95-105 MPap. 1: Flexural Strength ISO 178 MPaalso in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF | ISO 178 | not in the median: measured on a moulded bar |
| Charpy impact strength | 8-10 kJ/m2p. 1: Charpy Impact Strength (23 °C) ISO 179/1eA kJ/m2also in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF | ISO 179As the sheet prints it: 23 °C kJ/m2 ISO 179/1eA | not in the median: measured on a moulded bar |
| Izod impact strength | 9-11 kJ/m2p. 1: Izod Impact Strength (23 °C) ISO 180/1A kJ/m2also in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF | ISO 180As the sheet prints it: 23 °C kJ/m2 ISO 180/1A | not in the median: measured on a moulded bar |
| HDT | 92-100 °Cp. 1: HDT (4mm, Unannealed) ISO 75 °Calso in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF | ISO 75As the sheet prints it: 4mm Unannealed °C ISO 75as printedUnannealed | not in the median: measured on a moulded bar |
| Vicat softening temperature | 100-104 °Cp. 1: Vicat (50 N) ISO 306 °Calso in Extrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GF | ISO 306As the sheet prints it: 50 N °C ISO 306 | |
| Density | 1,18 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Melt mass-flow rate | 13-16 g/10minp. 1: Melt Flow Rate (220 °C/10 kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 220 °C/10 kg g/10min ISO 1133 | |
| Mould shrinkage orientation not stated | 0,25–0,4 %p. 1: Mold Shrinkage (3.2 mm) | specimen not stated, ISO 294As the sheet prints it: ISO 294-4; thickness=3.2 mm | |
| Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GF9 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 59,8 ±3 MPap. 1: Resistenza alla trazione | ASTM D638 | not in the median: measured on a moulded bar |
| Elongation at break | 8% -0,02p. 1: Allungamento nominale alla rottura | ASTM D638 | not in the median: measured on a moulded bar |
| Elongation at yield | 3%p. 1: Allungamento a rendimento | ASTM D638 | listed under other properties |
| Flexural modulus | 3500 ±200 MPap. 1: Modulo di flessione | ASTM D790 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 99 °Cp. 1: HDT/B ASTM D648 °C | ASTM D648As the sheet prints it: HDT B ASTM D648 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 101 °Cp. 1: VICAT A (VST) ASTM D1525 °C | ASTM D1525 | |
| Melting temperature | 190-210 °Cp. 1: Temperatura di fusione | specimen not stated, ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1,1 g/cm³p. 1: Densità | specimen not stated, ASTM D792 | |
| Mould shrinkage orientation not stated | 0,30%p. 1: Ritiro | specimen not stated, ASTM D955 | |
Print settings
- Nozzle
- 230–270 °Cown data sheet
- Bed
- 110 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 65 °C for 12 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 230-270°C; Bed 110°CExtrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1: Recommended printing settings
- Nozzle 230-270°C; Bed 110°CExtrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1: Recommended printing settings
- Nozzle 230–270 °C; Bed 110 °C; Drying Drying temperature 65 °C; Drying time 8–12 hExtrudr, DURAPRO ASA GF official maker product pagep. 1: Exact product drying table and own nozzle recommendation; other recipe fields not transcribed in this scoped profile; generic0.4mm table heading and specific FAQ diameter advice retained as different contexts; p. 1: Nozzle temperature; p. 1: Build plate temperature; p. 1: Surface preparation; p. 1: Enclosed chamber required
- Nozzle 230-270°C; Bed 110°CExtrudr, FICHE DE DONNÉES TECHNIQUES DURAPRO ASA GFp. 1: Buse; p. 1: Plateau chauffant; p. 1: Paramètres recommandés
Price
Not in the price sample.
Its 5 documents
What the maker says (10)
- Good for
The material is reinforced with glass fibers, making it ideal for mechanically stressed components.
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Benefits
DuraPro ASA GF is a weather-resistant and UV-resistant copolymer for industrial applications
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Benefits
Good heat resistance
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Warping and shrinkage
Low distortion
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Warping and shrinkage
Mold Shrinkage (3.2 mm) ISO 294-4 % 0,25–0,4
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Surface finish
Matte surface
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Adhesion between layers
DuraPro ASA GF is optimized for good adhesion layer, thermal stability, improved flow properties, and low warping.
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Nozzle wear
Hardened nozzle yes
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1 - Benefits
DuraPro ASA GF offers greater stiffness, improved heat resistance, and lower shrinkage than standard ASA, thanks to glass fiber reinforcement. As with all fiber-reinforced materials, this added rigidity comes with a trade-off in impact resistance and elongation compared to standard ASA, making it best suited to applications where stiffness and dimensional accuracy matter more than flexibility.
Extrudr, DURAPRO ASA GF official maker product pagep.1: Exact product FAQ/highlight, source text line97 - Pitfalls and limitations
No. Glass fiber reinforced filaments, including DuraPro ASA GF, are not certified for food contact.
Extrudr, DURAPRO ASA GF official maker product pagep.1: Exact product FAQ/highlight, source text line102
Chemicals and environment (1)
- UV and outdoor: described in words
UV and weather resistant
UV / weatherExtrudr, TECHNICAL DATA SHEET DURAPRO ASA GFp. 1
Flashforge ASAGF10Strength XY, MPa40.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C100–120Chamber, °C25–60Drying, °C, h80≥ 5 h
Flashforge ASAGF10Flashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet ASAGF10 Filament14 values | |||
| Tensile strength (yield or break not stated) XY | 40.8~41.3 MPaMechanical Properties: Tensile Strength (X-Y) | ISO 527print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | in the median |
| Elongation at break XY | 5.3~5.8 %Mechanical Properties: Elongation at Break (X-Y) | ISO 527print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | in the median |
| Flexural modulus XY | 3359~3368 Mpa MPaMechanical Properties: Bending Strength (X-Y) [sheet label; the value is the modulus] | ISO 178print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | in the median |
| Flexural modulus orientation not stated | 1359~1590 Mpa MPaMechanical Properties: Bending Strength (X-Z) [sheet label; the value is the modulus] | ISO 178print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | not in the median: another value of this product is in it |
| Flexural strength XY | 72.5~74.1 Mpa MPaMechanical Properties: Bending Modulus (X-Y) [sheet label; the value is the strength] | ISO 178print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | in the median |
| Flexural strength orientation not stated | 27.2~31.7 Mpa MPaMechanical Properties: Bending Modulus (X-Z) [sheet label; the value is the strength] | ISO 178print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | not in the median: another value of this product is in it |
| Izod impact strength XY | 6.3~6.9 KJ/m2 kJ/m²Mechanical Properties: Izod Impact Strength (X-Y) | ISO 180print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | not in the median: notch not stated |
| Izod impact strength orientation not stated | 2.5~3.2 KJ/m2 kJ/m²Mechanical Properties: Izod Impact Strength (X-Z) | ISO 180print settingsPrinted on a Flashforge Guider 3 Ultra: 0.4 mm nozzle, 250 °C, 200 mm/s, 100% concentric infill | not in the median: notch not stated |
| HDT at 0.45 MPa | 88 °CThermal Properties: HDT @ 0.455 MPa (66 psi) | ISO 75As the sheet prints it: ISO 75, 0.455 MPa (66 psi) | in the median |
| Continuous service temperature | 85 ℃ °CThermal Properties: Continuous Service Temperature | IEC 60216 | |
| Density | 1.17~1.18 g/cm³Physical Properties: Density | ISO 1183 | |
| Water absorption | < 0.5 %Physical Properties: Water Absorption | ISO 62As the sheet prints it: ISO 62, 23 °C / 24 h | |
| Melt mass-flow rate | 9~15 g/10min g/10 minPhysical Properties: Melt Index (MFR) | ISO 1133As the sheet prints it: ISO 1133; 220 °C, 5 kg | |
| Fibre content | 10% glass fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 240–260 °Cown data sheet
- Bed
- 100–120 °Cown data sheet
- Heated chamber
- 25–60 °Cown data sheet
- Drying
- 80 °C for ≥ 5 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 240-260 °C; Bed 100-120 °C; Chamber Room temperature-60 °C (ambient temperature for printing); Drying 80 °C, at least 5 hFlashforge, Technical Data Sheet ASAGF10 FilamentRecommended Printing Conditions; p. 2: Nozzle & Gear Material
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
Dimensional stability/High rigidity/Weather resistance.
Flashforge, Technical Data Sheet ASAGF10 Filamentp. 1 - Nozzle wear
Nozzle & Gear Material Hardened steel
Flashforge, Technical Data Sheet ASAGF10 Filamentp. 2 - Printing advice
Higher speeds require higher temperatures.
Flashforge, Technical Data Sheet ASAGF10 Filamentp. 2 - Moisture sensitivity
As the ASAGF10 filament absorbs moisture easily due to the added glass fiber, it should be dried before being used.
Flashforge, Technical Data Sheet ASAGF10 Filamentp. 3 - Printing advice
After the printing process, it is recommended to dry the model in the oven at 80°C for 1-3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet ASAGF10 Filamentp. 3
Chemicals and environment (1)
- Post-processing: described in words
After the printing process, it is recommended to dry the model in the oven at 80°C for 1-3 hours to increase the strength of the model.
Flashforge, Technical Data Sheet ASAGF10 Filamentp. 3: Post-processing note
iSANMATE ASA Glass FiberStrength XY, MPa55Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²9IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–270Bed, °C80–100Chamber, °C—Drying, °C, h—
iSANMATE ASA Glass FiberiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, ASA Glass Fiber9 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 55 MPap. 1: Tensile Strength | ISO 527As the sheet prints it: ISO 527-2/50 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 10 %p. 1: Tensile Strain (Break) | ISO 527As the sheet prints it: ISO 527-2/50 (printed "SO 527-2/50") | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2765 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 82 MPap. 1: Bending stress | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | 9 Kj/m2p. 1: Notched | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 220 ℃p. 1: Melting point | DSC | |
| Density | 1.15-1.20 g/cm³p. 1: Density | ISO 1183 | |
| Melt mass-flow rate | 15 g/10 minp. 1: Melt Flow Index (220 ℃, 10Kg) | ISO 1133As the sheet prints it: ISO 1133; 220 °C, 10 kg | |
| Mould shrinkage orientation not stated | 0.2-0.4 %p. 1: Shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
Print settings
- Nozzle
- 240–270 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- No temperature statediSANMATE, ASA Glass FiberRecommended printing settings
- Nozzle 240-270 degrees; Bed 80-100°CiSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1: Product parameters
Price
Not in the price sample.
Its 3 documents
What the maker says (17)
- Good for
It is used in outdoor and outdoor plastic products in direct contact with sunlight.
iSANMATE, ASA Glass Fiberp. 1 - Good for
Typical Application: 3D printing products, mainly used in outdoor plastic case products, car modification parts, etc.
iSANMATE, ASA Glass Fiberp. 1 - Benefits
It can not only resist degradation caused by ultraviolet radiation Aging, fading, and at the same time, it has a strong guarantee against decomposition or discoloration caused by high temperature in the oxidation process in the atmosphere, thus greatly improving the anti-aging and weather resistance of the material.
iSANMATE, ASA Glass Fiberp. 1 - Benefits
Good heat resistance
iSANMATE, ASA Glass Fiberp. 1 - Benefits
Good chemical corrosion resistance
iSANMATE, ASA Glass Fiberp. 1 - Warping and shrinkage
Shrinkage % ISO 294-4 0.2-0.4
iSANMATE, ASA Glass Fiberp. 1 - Good for
Boasting exceptional strength, weather resistance, and durability, it’s ideal for automotive parts, outdoor enclosures, and industrial components.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Benefits
High Strength & Rigidity : Glass fiber-reinforced; meets industrial structural strength needs.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Benefits
Superior Weather Resistance : UV, temperature & aging resistant; stable for outdoor use.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Good for
Wide Applicability : Suits auto parts, electronics, outdoors; flexible processing.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Warping and shrinkage
Easy Processability : Low shrinkage/warpage; precise molding, simpler production.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Surface finish
Diverse Colors : Black, white, grey; blends function with aesthetics.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Benefits
ASA exhibits exceptional durability againstsunlight oxidation, aging, and water, ensuringthat objects printed with ASA will maintaintheir integrity and vibrancy even with extendedexposure to outdoor elements.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Good for
ASA is an incredibly resilient and longlastingmaterial that is well-suited for 3D printingmodels that will be used outdoors or forengineering parts.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Moisture sensitivity
ASA filament is resistant to moisture. Moisture doesnot affect the mechanical properties and dimensiona!stability of ASA.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Benefits
Compared to PETG and ABS, ASA offers ahigher levelof temperature resistance thanboth PETG and ABSIt has a heat distortiontemperature of up to 100’C
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1 - Moisture sensitivity
We use vacuum packing and desiccant packing together to seal. This will make it easy to keep your 3D printer filament in an optimal storage condition.
iSANMATE, iSANMATE UV Resistant ASA Glass Fiber 3D Filament for Outdoor Equipmentp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
It is resistant to ultraviolet rays and does not fade or yellow.
UViSANMATE, ASA Glass Fiberp. 1
Spectrum asax x gf10Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg96Nozzle, °C240–270Bed, °C80–100Chamber, °CnoneDrying, °C, h803 h
Spectrum asax x gf10Spectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, asax x gf1010 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus orientation not stated | 2550 MPaMechanical properties: Elastic modulus tensile* | ISO 527As the sheet prints it: ISO 527, 1 mm/min | not in the median: measured on a moulded bar |
| Tensile break strength orientation not stated | 55 MPaMechanical properties: Tensile Strength* at break | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at yield orientation not stated | 2.80 %Mechanical properties: Tensile Elongation* at yield | ISO 527 | listed under other properties |
| Charpy impact strength orientation not stated | 25 kJ/m2Mechanical properties: Charpy impact strength* unnotched (at 23°C) | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: measured on a moulded bar |
| Charpy impact strength orientation not stated | 8.3 kJ/m2Mechanical properties: Charpy impact strength* notched (at 23°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 100 °CThermal properties: Heat Deflection Temperature 0.45mn/m2* | ISO 75As the sheet prints it: ISO 75, 0.45 MPa | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 90 °CThermal properties: Heat Deflection Temperature 1.81mn/m2* | ISO 75As the sheet prints it: ISO 75, 1.81 MPa | not in the median: measured on a moulded bar |
| Vicat softening temperature | 98°Cp. 1: VICAT Softening point | specimen not stated, ISO 306 | |
| Density | 1.11 g/cm3p. 1: Density | specimen not stated, ISO 1183 | |
| Fibre content | 10% glass fiberp. 1: Fibre content | specimen not stated, no standard stated | |
Print settings
- Nozzle
- 240–270 °Cown data sheet
- Bed
- 80–100 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 80 °C for 3 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 240 - 270°C; Bed 80 - 100°CSpectrum, asax x gf10Recommended printing settings; p. 1: Dry box; p. 1: * settings are based on a 0.5mm nozzle
- Drying 80°C, 3h; In justified casesSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
96 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 96 CAD/kgTraffic Black - Spectrum ASA-X GF10 - 1.75mm, 1kg (SKU 5905991400189)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (6)
- Benefits
printable on desktop printers without a heated chamber
Spectrum, asax x gf10p. 1 - Benefits
Based on a glass fiber reinforced ASA polymer provides excellent mechanical strength and hard-ness, making printed parts resistant to loads and prolonged exposure to UV radiation and moisture.
Spectrum, asax x gf10p. 1 - Surface finish
matt printed surface
Spectrum, asax x gf10p. 1 - Adhesion between layers
perfect bonding of the layers
Spectrum, asax x gf10p. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, asax x gf10p. 1 - Nozzle wear
Ruby or hardened nozzle recommended
Spectrum, asax x gf10p. 1
Chemicals and environment (2)
- UV and outdoor: described in words
excellent resistance to outdoor exposure
UVSpectrum, asax x gf10p. 1 - UV and outdoor: described in words
UV resistance
UVSpectrum, asax x gf10p. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.