ASA Aero

4 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
not published

How the numbers are worked out

QIDI ASA-AeroStrength XY, MPa8.25Strength Z, MPa7.86Modulus XY, GPa0.594Charpy notched, kJ/m²2.29HDT 0.45, °C70HDT 1.8, °C55Price, CAD/kg—Nozzle, °C240–280Bed, °C80–110Chamber, °C40–70Drying, °C, h70–806–8 h

QIDI ASA-AeroQIDI

Published values

Property	As published	Conditions	On the Overview
QIDI, Technical Data Sheet QIDI ASA-Aero11 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	593.99 ± 24.34 MPap. 2: 杨氏模量(X-Y) Young's Modulus	no standard stated	in the median
Tensile break strength XY	8.25 ± 0.15 MPap. 2: 断裂拉伸强度(X-Y) Tensile strength at Break (X-Y)	no standard stated	in the median
Tensile break strength Z	7.86 ± 0.14 MPap. 2: 断裂拉伸强度(Z) Tensile strength at Break (Z)	no standard stated	in the median
Elongation at break XY	11.52 ± 0.58 %p. 2: 断裂伸长率(X-Y) ISO 527 Elongation at break (X-Y)	ISO 527	in the median
Elongation at break Z	5.54 ± 0.28 %p. 2: 断裂伸长率(Z) ISO 527 Elongation at break (Z)	ISO 527	in the median
Flexural modulus XY	544.92 ± 74.44 MPap. 3: 弯曲模量(X-Y) Bending Modulus	no standard stated	in the median
Flexural strength XY	14.31 ± 1.66 MPap. 2: 弯曲强度(X-Y) ISO 178	ISO 178	in the median
Charpy impact strength XY	2.29 ± 0.13 KJ/㎡p. 3: 缺口冲击强度(X-Y) ISO 179 Charpy impact strength	ISO 179notched	in the median
HDT at 0.45 MPa	70 °Cp. 2: Determination of temperature	no standard named As the sheet prints it: 0.45 MPa	in the median
HDT at 1.8 MPa	55 °Cp. 2: 热变形温度 ISO 75:Method A	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	in the median
Density	1.03 g/cm³p. 2: 密度 ISO 845 Density	specimen not stated, ISO 845
QIDI, QIDI Filament Guide \| Choose the Right Filament2 values
Tensile strength (yield or break not stated) Z	7.86MPap. 1: Tensile Strength - Z	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Water absorption	0.65%p. 1: Saturated Water Absorption Rate	no standard stated after moisture conditioning saturation

Print settings

Nozzle: 240–280 °Cown data sheet
Bed: 80–110 °Cown data sheet
Heated chamber: 40–70 °Cown data sheet
Drying: optional: 70–80 °C for 6–8 hown data sheet
Hardened nozzle: not neededown data sheet

Its 2 print profiles, in the documents' words

Nozzle 240-280°C; Bed 80-110℃; Chamber a certain ambient temperature (40-70°C) is required during printingQIDI, Technical Data Sheet QIDI ASA-Aerop. 3: Nozzle temperature, Build plate temperature; p. 3: Recommended nozzle diameter; p. 3: Recommended build surface
Nozzle 240-280°C; Bed Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C); Drying Optional; Blast Drying Oven: 70-80°C / 6-8 hQIDI, QIDI Filament Guide | Choose the Right Filamentp. 1: Is drying highly recommended?; p. 1: Recommended hardware settings; p. 1: Bed Temperature & Type; p. 1: Extruder heat range

Price

Not in the price sample.

Its 3 documents

What the maker says (11)

BenefitsWith this technique, it is easy to reduce the weight of the model.QIDI, Technical Data Sheet QIDI ASA-Aerop. 1
BenefitsIn the best-case scenario, the model weight can be reduced to 50% of a model printed with ordinary ASA.QIDI, Technical Data Sheet QIDI ASA-Aerop. 1
BenefitsQIDI ASA-Aero is a type of ASA filament that will start foaming with the aid of a blowing agent during the printing process.QIDI, Technical Data Sheet QIDI ASA-Aerop. 1
Surface finishIn addition to that, the matte texture of the printed surface can reduce the visibility of printed layers and thus give a smooth surface finish.QIDI, Technical Data Sheet QIDI ASA-Aerop. 1
Pitfalls and limitationsSince ASA-Aero adops the ‘on-demand foaming’ technology, the filament will continue to expand in the nozzle after being heated during the printing process.QIDI, Technical Data Sheet QIDI ASA-Aerop. 4
Pitfalls and limitationsTherefore, it will cause unavoidable stringing during the nozzle movement.QIDI, Technical Data Sheet QIDI ASA-Aerop. 4
Pitfalls and limitationsEven adjusting the retraction setting in the slicing software cannot solve this problem.QIDI, Technical Data Sheet QIDI ASA-Aerop. 4
Warping and shrinkageBecause ASA materials have a high glass transition temperature, a certain ambient temperature ( 40-70°C ) is required during printing to release the internal stress of the printed parts and reduce warping.QIDI, Technical Data Sheet QIDI ASA-Aerop. 4
Odour and emissionsWhen printing with ASA-Aero filaments, please place the enclosed printer in a ventilated environment.QIDI, Technical Data Sheet QIDI ASA-Aerop. 4
Printing adviceBased on the above, it is recommended to turn off the retraction setting.QIDI, Technical Data Sheet QIDI ASA-Aerop. 4
Printing adviceWhen printing thin-walled models without any form of insulation, it is recommended to use nozzles with a diameter of 0.6mm or more to ensure the strength of printed parts and reduce shrinkage.QIDI, Technical Data Sheet QIDI ASA-Aerop. 4

Chemicals and environment (1)

UV and outdoor: described in wordsMeanwhile, ASA-Aero retains the original UV aging resistance and high heat resistance of ASA material, which is suitable for long-term use in high-temperature outdoor environments.UVQIDI, Technical Data Sheet QIDI ASA-Aerop. 2

colorFabb Light Weight ASA (LW-ASA)Strength XY, MPa11.5Strength Z, MPa—Modulus XY, GPa0.824Charpy notched, kJ/m²1.31HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C90–100Chamber, °C—Drying, °C, h606 h

colorFabb Light Weight ASA (LW-ASA)colorFabb

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet Light Weight ASA (LW-ASA)11 values
Tensile modulus XY	824 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Tensile modulus orientation not stated	2200 MPap. 1: Youngs Modulus Tensile, ISO 527-1A, Injection Molded	ISO 527 As the sheet prints it: Tensile, ISO 527-1A	not in the median: measured on a moulded bar
Tensile strength (yield or break not stated) XY	11.5 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Tensile strength (yield or break not stated) orientation not stated	50 MPap. 1: Tensile Strength Tensile, ISO 527-1A, Injection Molded	ISO 527 As the sheet prints it: Tensile, ISO 527-1A	not in the median: measured on a moulded bar
Elongation at break XY	3.9 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Elongation at break orientation not stated	20 %p. 1: Elongation at break Tensile, ISO 527-1A, Injection Molded	ISO 527 As the sheet prints it: Tensile, ISO 527-1A	not in the median: measured on a moulded bar
Flexural modulus XY	769 MPap. 1: Flexural Modulus Flexural, ISO 178	ISO 178 print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Flexural modulus orientation not stated	2300 MPap. 1: Flexural Modulus Flexural, ISO 178, Injection Molded	ISO 178 As the sheet prints it: Flexural, ISO 178	not in the median: measured on a moulded bar
Flexural strength XY	20.7 MPap. 1: Flexural Strength Flexural, ISO 178	ISO 178 print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Charpy impact strength XY	1.31 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179	ISO 179notched	in the median
HDT at 0.45 MPa	93 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75	ISO 75 As the sheet prints it: HDT B ISO 75	not in the median: measured on a moulded bar
colorFabb, Technical datasheet colorFabb LW-ASA1 value
Density	0.40-1,07 g/cm3p. 1: Density g/cm3	no standard stated

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 90–100 °Cown data sheet
Heated chamber: not stated
Drying: 60 °C for 6 hown data sheet
Hardened nozzle: not stated

Its 3 print profiles, in the documents' words

Nozzle 240-260 °C; Bed 90-100 °CcolorFabb, Technical datasheet Light Weight ASA (LW-ASA)p. 2: Recommended printing settings
Nozzle 240 – 260 °C; Bed 90 – 100 °CcolorFabb, Technical datasheet colorFabb LW-ASAp. 1: Recommended printing settings
Drying 60 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)

Price

Not in the price sample.

Its 4 documents

What the maker says (10)

BenefitsLike regular ASA the LW-ASA features inherent UV stability and high temperature resistance of 96ºC.colorFabb, Technical datasheet Light Weight ASA (LW-ASA)p. 1
Printing adviceAt around 230ºC this material will start foaming, increasing its volume by nearly 2,5 times.colorFabb, Technical datasheet Light Weight ASA (LW-ASA)p. 1
Printing adviceUsers can decrease material flow by 60% to achieve light weight parts, or use the expanding properties to effectively reduce print time by using big layer heights or single extra thick perimeters.colorFabb, Technical datasheet Light Weight ASA (LW-ASA)p. 1
Warping and shrinkageTo reduce warping, we would advise to use the least amount of cooling possible.colorFabb, Technical datasheet Light Weight ASA (LW-ASA)p. 2
Adhesion between layersAlso, for the best mechanical performance and layer adhesion, try printing with the least amount of cooling.colorFabb, Technical datasheet Light Weight ASA (LW-ASA)p. 2
BenefitsLike regular ASA the LW-ASA features inherent UV stability and high temperature resistance of 96ºC.colorFabb, Technical datasheet colorFabb LW-ASAp. 1
Warping and shrinkageTo reduce warping we would advice to use the least amount of cooling possible.colorFabb, Technical datasheet colorFabb LW-ASAp. 1
Adhesion between layersAlso for best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.colorFabb, Technical datasheet colorFabb LW-ASAp. 1
Printing adviceAt around 230ºC this material will start foaming, increasing its volume by nearly 2,5 times.colorFabb, Technical datasheet colorFabb LW-ASAp. 1
Printing adviceUsers can decrease material flow by 60% to achieve light weight parts, or use the expanding properties to effectively reduce print time by using big layer heights or single extra thick perimeters.colorFabb, Technical datasheet colorFabb LW-ASAp. 1

Spectrum LW-ASA UltraFoamStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa1.6Charpy notched, kJ/m²—HDT 0.45, °C< 80HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–285Bed, °C60–90Chamber, °C—Drying, °C, h75≥ 6 h

Spectrum LW-ASA UltraFoamSpectrum

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET LW-ASA UltraFoam10 valuesUnless a row says otherwise: specimen not statedtested at 23°C
Tensile modulus orientation not stated	1600 MPap. 1: Tensile Modulus, 23°C, 50mm/min, 3.2mm	no standard named As the sheet prints it: 23°C 50mm/min 3.2mm	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	39 MPap. 1: Tensile Strength, at Yield, 23°C, 50mm/min, 3.2mm	no standard named As the sheet prints it: at Yield 23°C 50mm/min 3.2mm	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	32 %p. 1: Tensile Elongation at Break, 23°C, 50mm/min, 3.2mm	no standard named As the sheet prints it: 23°C 50mm/min 3.2mm	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1750 MPap. 1: Flexural Modulus, 23°C, 15mm/min, 3.2mm	no standard named As the sheet prints it: 23°C 15mm/min 3.2mm	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	59 MPap. 1: Flexural Strength, 23°C, 15mm/min, 3.2mm	no standard named As the sheet prints it: 23°C 15mm/min 3.2mm	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	405 J/mp. 1: Izod Impact Strength, Notched, 3.2mm, 23°C	no standard named As the sheet prints it: 3.2mm 23°C	not in the median: in J/m
Izod impact strength	320 J/mp. 1: Izod Impact Strength, Notched, 6.4mm, 23°C	no standard named As the sheet prints it: 6.4mm 23°C	not in the median: in J/m
HDT	80 °Ctranscription correctedp. 1: Heat deflection temperature of printed parts up to	printed specimen, no standard named As the sheet prints it: of printed parts up to test temperature not stated	not in the median: set apart (never used to pass), no stated test load
Melting temperature	200 °Ctranscription correctedp. 1: Melting temperature from	no standard statedtest temperature not stated
Density	1,08 g/cm3p. 1: Density	no standard statedtest temperature not stated

Print settings

Nozzle: 220–285 °Cown data sheet
Bed: 60–90 °Cown data sheet
Heated chamber: not stated
Drying: optional: 75 °C for ≥ 6 hown data sheet
Hardened nozzle: not neededown data sheet

Its print profile, in the documents' words

Nozzle 220-285°C; Bed 60-90°C; Drying Drying (if wet) recommended; at least 6h at 75°C using a hot dry air ovenSpectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1: Recommended printing settings; p. 1: Drying (if wet) ***; p. 1: Ruby or hardened nozzle; p. 1: * settings are based on a 0.4mm nozzle

Price

Not in the price sample.

Its 2 documents

What the maker says (7)

Good forLW-ASA UltraFoam is an ideal solution for users seeking lightweight, durable, andvisually appealing prints for outdoor and technical applications where weight and efficiency matter.Spectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1
Good forUV and weather resistant–ideal for outdoor applicationsSpectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1
BenefitsThanks to the unique propertiesof the material, it enables up to 3x weight reduction of printed parts without compromising strengthor surface quality.Spectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1
Surface finishMatte finish hides layer linesSpectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1
Moisture sensitivityDry box YesSpectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1
Nozzle wearRuby or hardened nozzle NoSpectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET LW-ASA UltraFoamp. 1

Bambu Lab ASA AeroStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C85HDT 1.8, °C—Price, CAD/kg64Nozzle, °C240–280Bed, °C80–90Chamber, °C45–60Drying, °C, h808 h

Bambu Lab ASA AeroBambu Lab

Published values

Property	As published	Conditions	On the Overview
Bambu Lab, Bambu Filament Technical Data Sheet - ASA Aero19 valuesThe same values also in Bambu Lab, ASA Aero official maker product page.Unless a row says otherwise: Printed off the product's recipe dry Dried before testing (see preparation) annealed at 80 °C for 12 h All the specimens were annealed and dried at 80 °C for 12 h before testing print settings Specimen Printing Conditions Subjects Data Nozzle Temperature 225 °C Bed Temperature 85 °C Printing Speed 100 mm/s Infill Density 100% * All the specimens were printed at the following settings: Nozzle Temperature = 225 °C, Printing Speed = 100 mm/s, Bed Temperature = 85 °C, Infill Density= 100%. All the specimens were annealed and dried at 80 °C for 12 h before testing. And
Tensile modulus XY	2010 ± 260 MPap. 2: Young's Modulus (X-Y)	ISO 527, GB/T 1040	not in the median: printed at a setting the product is not meant for
Tensile modulus Z	1180 ± 210 MPAp. 2: Young's Modulus (Z)	ISO 527, GB/T 1040	not in the median: printed at a setting the product is not meant for
Tensile strength (yield or break not stated) XY	32 ± 4 MPap. 2: Tensile Strength (X-Y)	ISO 527, GB/T 1040	not in the median: printed at a setting the product is not meant for
Tensile strength (yield or break not stated) Z	21 ± 4 MPap. 2: Tensile Strength (Z)	ISO 527, GB/T 1040	not in the median: printed at a setting the product is not meant for
Elongation at break XY	5.1% ± 1.6%transcription correctedp. 2: Breaking Elongation Rate (X-Y)	ISO 527, GB/T 1040 As the sheet prints it: ISO 527, GB/T 1040 5.1% ±	not in the median: printed at a setting the product is not meant for
Elongation at break Z	2.3% ± 0.9%transcription correctedp. 2: Breaking Elongation Rate (Z)	ISO 527, GB/T 1040 As the sheet prints it: ISO 527, GB/T 1040 2.3% ±	not in the median: printed at a setting the product is not meant for
Flexural modulus XY	1510 ± 120 MPap. 2: Bending Modulus (X-Y)	ISO 178, GB/T 9341	not in the median: printed at a setting the product is not meant for
Flexural modulus Z	1220 ± 110 MPap. 2: Bending Modulus (Z)	ISO 178, GB/T 9341	not in the median: printed at a setting the product is not meant for
Flexural strength XY	58 ± 6 MPap. 2: Bending Strength (X-Y)	ISO 178, GB/T 9341	not in the median: printed at a setting the product is not meant for
Flexural strength Z	24 ± 3 MPap. 2: Bending Strength (Z)	ISO 178, GB/T 9341	not in the median: printed at a setting the product is not meant for
Charpy impact strength XY	32.0 ± 2.5 kJ/m²p. 2: Impact Strength (X-Y)	ISO 179, GB/T 1043unnotched	not in the median: printed at a setting the product is not meant for
Charpy impact strength XY	8.2 ± 1.6 kJ/m² (notched)p. 2: Impact Strength (X-Y) (notched)	ISO 179, GB/T 1043	not in the median: printed at a setting the product is not meant for
Charpy impact strength Z	3.4 ± 0.5 kJ/m²p. 2: Impact Strength (Z)	ISO 179, GB/T 1043	not in the median: printed at a setting the product is not meant for
HDT at 1.8 MPa	78 °Cp. 2: Heat Deflection Temperature	ISO 75 As the sheet prints it: ISO 75 1.8 MPa	not in the median: printed at a setting the product is not meant for
Vicat softening temperature	80 °Cp. 2: Vicar Softening Temperature	ISO 306, GB/T 1633
Melting temperature	204 °Cp. 2: Melting Temperature	DSC As the sheet prints it: DSC, 10 °C/min
Density	0.99 g/cm³p. 2: Densityalso in Bambu Lab, ASA Aero official maker product page	specimen not stated, ISO 1183
Water absorption	0.80 %p. 2: Saturated Water Absorption Rate	no standard named As the sheet prints it: te 25 °C, 55% RH tested at 25°C
Melt mass-flow rate	1.56 ± 0.5 g/10 minp. 2: Melt Index	specimen not stated, no standard named As the sheet prints it: 210 °C, 2.16 kg tested at 210°Cmoisture state not statedtreatment not stated

Also named without a value: glass transition temperature, crystallization temperature.
Bambu Lab, ASA Aero official maker product page5 valuesThe same values also in Bambu Lab, Bambu Filament Technical Data Sheet - ASA Aero.
Flexural strength Z	24 MPap. 1: Layer Strength (Bending Strength - Z)	no standard stated	in the median
Impact strength, test unclear XY	32.0 kJ/m²p. 1: Toughness (Impact Strength - XY)	no standard statedWhich test: probably Charpy	listed under other properties
Impact strength, test unclear Z	3.4 kJ/m²p. 1: Layer Adhesion (Impact Strength - Z - Dry State)	no standard statedWhich test: probably Charpy	listed under other properties
HDT at 0.45 MPa	85 °Cp. 1: Heat Deflection Temperature / °C (0.45 MPa)also in Bambu Lab, Bambu Filament Technical Data Sheet - ASA Aero	no standard named As the sheet prints it: 0.45 MPa	not in the median: set apart (never used to pass), test bar not described as printed
Density	0.46 ~ 0.97 g/cm³p. 1: Prints Density	no standard stated

Print settings

Nozzle: 240–280 °Cown data sheet
Bed: 80–90 °Cown data sheet
Heated chamber: 45–60 °Cown data sheet
Drying: 80 °C for 8 hown data sheet
Hardened nozzle: not stated
Annealing: 80 °C for 12 hown data sheet

Its 2 print profiles, in the documents' words

Nozzle 240 - 280 °C; Bed 80 - 90 °C; Chamber 45 - 60 °C; Drying Blast Drying Oven: 80 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroRecommended printing settings
Nozzle 240 - 280 °C; Drying Dry Out Before UseBambu Lab, ASA Aero official maker product pagep. 1: Cautions for Use; p. 1: Printing Temperature

Price

64 CAD/kgits one regular price in the sample

1 listing

Bambu Lab Canada: 64 CAD/kgASA Aero - White (46100) / Filament with spool / 1 kgin its price; seen 10 Sep 2026

Its 3 documents

What the maker says (6)

Good forWith these unique properties, it is ideal for printing long-lasting outdoor models and weight-sensitive projects, such as RC planes.Bambu Lab, Bambu Filament Technical Data Sheet - ASA Aerop. 1
BenefitsBambu ASA Aero is a self-foaming material renowned for its exceptional durability and toughness.Bambu Lab, Bambu Filament Technical Data Sheet - ASA Aerop. 1
Odour and emissionsOdor OdorlessBambu Lab, Bambu Filament Technical Data Sheet - ASA Aerop. 3
Good forOnly 50%-75% the density of regular ASA prints, ASA Aero is as light as feather, designed for weight-sensitive objects, such as RC planes and unmanned aerial vehicles (UAVs). With controllable foaming characteristic, ASA Aero achieves lower density of prints by increasing printing temperature or lowering flow rate.Bambu Lab, ASA Aero official maker product pagep. 1: exact product features/description/application tips, source text line 118
Pitfalls and limitationsThe average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.Bambu Lab, ASA Aero official maker product pagep. 1: exact product features/description/application tips, source text line 119
Pitfalls and limitationsNot compatible with Cool Plate SuperTack, Hotend with Hardened Steel Nozzle 0.6 mm / 0.8 mm, and Hotend with Stainless Steel Nozzle 0.2 mm.Bambu Lab, ASA Aero official maker product pagep. 1: exact product features/description/application tips, source text line 159

Specimen preparation (1)

All the specimens were annealed and dried at 80 °C for 12 h before testingBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroTest specimen preparation

Chemicals and environment (7)

Water solubility: insolubleInsoluble in waterBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroSolubility
Acid resistance: resistantResistantBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroResistance to Acid
Alkali resistance: resistantResistantBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroResistance to Alkali
Organic solvent resistance: limitedNot resistant to some organic solventsBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroResistance to Organic Solvent
Oil and grease resistance: limitedResistant to most kinds of oil and greaseBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroResistance to Oil and Grease
Flammability: flammableFlammableBambu Lab, Bambu Filament Technical Data Sheet - ASA AeroFlammability
UV and outdoor: described in wordsAdditionally, it boasts extraordinary resistance to temperature, water, and UV rays.UVBambu Lab, Bambu Filament Technical Data Sheet - ASA Aerop. 1

Values are for the colour each sheet tested; pigment can change them.