ASA

40 products from 33 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
measured after annealing
from the Bambu Lab Filament Guide
Izod where no Charpy is published
added filler or additive
shared data sheet
not published

How the numbers are worked out

Bambu Lab ASAStrength XY, MPa37Strength Z, MPa31Modulus XY, GPa2.45Charpy notched, kJ/m²19.6HDT 0.45, °C100HDT 1.8, °C92Price, CAD/kg39Nozzle, °C240–270Bed, °C80–100Chamber, °C45–60Drying, °C, h808 h

Bambu Lab ASABambu Lab

Published values

Property	As published	Conditions	On the Overview
Bambu Lab, Bambu Filament Technical Data Sheet - ASA20 valuesUnless a row says otherwise: printed specimen dry Dried before testing (see preparation) annealed at 80 °C for 12 h All the specimens were annealed and dried at 80 °C for 12 h before testing print settings Specimen Printing Conditions Subjects Data Nozzle Temperature 260 °C Bed Temperature 80 °C Printing Speed 200 mm/s Infill Density 100% *All the specimens were annealed and dried at 80 °C for 12 h before testing. And the suggested annealing temperature of models printed with Bambu ASA is 80 to 90 °C, and the time is 6 to 12 hours. The annealing effect depends on the annealing
Tensile modulus XY	2450 ± 270 MPap. 2: Young's Modulus (X-Y)	ISO 527, GB/T 1040	in the median
Tensile modulus Z	2120 ± 260 MPAp. 2: Young's Modulus (Z)	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	37 ± 3 MPap. 2: Tensile Strength (X-Y)	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	31 ± 4 MPap. 2: Tensile Strength (Z)	ISO 527, GB/T 1040	in the median
Elongation at break XY	9.2 ± 1.4 %p. 2: Breaking Elongation Rate (X-Y)	ISO 527, GB/T 1040	in the median
Elongation at break Z	4.6 ± 0.8 %p. 2: Breaking Elongation Rate (Z)	ISO 527, GB/T 1040	in the median
Flexural modulus XY	1920 ± 130 MPap. 2: Bending Modulus (X-Y)	ISO 178, GB/T 9341	in the median
Flexural modulus Z	1650 ± 120 MPap. 2: Bending Modulus (Z)	ISO 178, GB/T 9341	in the median
Flexural strength XY	65 ± 5 MPap. 2: Bending Strength (X-Y)	ISO 178, GB/T 9341	in the median
Flexural strength Z	40 ± 3 MPap. 2: Bending Strength (Z)	ISO 178, GB/T 9341	in the median
Charpy impact strength XY	41.0 ± 2.3 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched	ISO 179, GB/T 1043	not in the median: unnotched
Charpy impact strength XY	19.6 ± 1.8 kJ/m²p. 2: Impact Strength (X-Y) — notched	ISO 179, GB/T 1043	in the median
Charpy impact strength Z	4.9 ± 0.6 kJ/m²p. 2: Impact Strength (Z)	ISO 179, GB/T 1043	not in the median: notch not stated
HDT at 0.45 MPa	100 °Cp. 2: Heat Deflection Temperature	ISO 75 As the sheet prints it: ISO 75 0.45 MPa	in the median
HDT at 1.8 MPa	92 °Cp. 2: Heat Deflection Temperature	ISO 75 As the sheet prints it: ISO 75 1.8 MPa	in the median
Vicat softening temperature	106 °Cp. 2: Vicar Softening Temperature	ISO 306, GB/T 1633
Melting temperature	210 °Cp. 2: Melting Temperature	DSC As the sheet prints it: DSC, 10 °C/min
Density	1.05 g/cm³p. 2: Density	specimen not stated, ISO 1183
Water absorption	0.45 %p. 2: Saturated Water Absorption Rate	no standard named As the sheet prints it: te 25 °C, 55% RH tested at 25°C
Melt mass-flow rate	7.0 ± 0.8 g/10 minp. 2: Melt Index	specimen not stated, no standard named As the sheet prints it: 260 °C, 2.16 kg tested at 260°Cmoisture state not statedtreatment not stated
Also named without a value: glass transition temperature, crystallization temperature.

Print settings

Nozzle: 240–270 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: 45–60 °Cown data sheet
Drying: 80 °C for 8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide
Annealing: 80 °C for 12 hown data sheet

Its 2 print profiles, in the documents' words

Nozzle 240 - 270 °C; Bed 80 - 100 °C; Chamber 45 - 60 °C; Drying Blast Drying Oven: 80 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - ASARecommended printing settings
No temperature statedBambu Lab, ASA official maker product pagep. 1: Cautions for Use

Price

39 CAD/kgthe median of its 3 regular prices in the sample

4 listings: 3 in its price, 1 with no regular price per kilogram recorded

Bambu Lab Canada: 39 CAD/kgASA - Red (45200) / Filament with spool / 1kgin its price; seen 10 Sep 2026
Bambu Lab Canada: 39 per kg, sale priceASA - Green (45500) / Filament with spool / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
3D Printing Canada: 39 CAD/kgWhite - Bambu Lab ASA Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
Shop3D.ca: 39 CAD/kgBambu Lab - ASA Filament (1.75mm) 1kg / Blackin its price; seen 10 Sep 2026

Its 3 documents

What the maker says (4)

Good forIts unique combination of properties makes it an ideal material for printing outdoor models (plant signs, mailboxes, wind vanes, etc.) and structural parts that require long-term exposure to challenging outdoor conditions.Bambu Lab, Bambu Filament Technical Data Sheet - ASAp. 1
Odour and emissionsOdor OdorlessBambu Lab, Bambu Filament Technical Data Sheet - ASAp. 3
Good forASA is ideal for outdoor applications, such as automotive exterior parts, signage, and outdoor equipment, thanks to its enhanced weather resistance and color stability. ABS is a versatile material with excellent mechanical properties that is commonly used for indoor applications.Bambu Lab, ASA official maker product pagep. 1: exact product features/description/application tips, source text line 137
Pitfalls and limitationsBambu ASA offers extraordinary UV, oxidation, and aging resistance, providing effective protection against breakage and color degradation when used outdoors for long-term purposes.Bambu Lab, ASA official maker product pagep. 1: exact product features/description/application tips, source text line 110

Specimen preparation (1)

All the specimens were annealed and dried at 80 °C for 12 h before testingBambu Lab, Bambu Filament Technical Data Sheet - ASATest specimen preparation

Chemicals and environment (8)

Water solubility: insolubleInsoluble in waterBambu Lab, Bambu Filament Technical Data Sheet - ASASolubility
Acid resistance: resistantResistantBambu Lab, Bambu Filament Technical Data Sheet - ASAResistance to Acid
Alkali resistance: resistantResistantBambu Lab, Bambu Filament Technical Data Sheet - ASAResistance to Alkali
Organic solvent resistance: limitedNot resistant to some organic solventsBambu Lab, Bambu Filament Technical Data Sheet - ASAResistance to Organic Solvent
Oil and grease resistance: limitedNot resistant to some kinds of oil and greaseBambu Lab, Bambu Filament Technical Data Sheet - ASAResistance to Oil and Grease
Flammability: flammableFlammableBambu Lab, Bambu Filament Technical Data Sheet - ASAFlammability
Post-processing: described in wordsthe suggested annealing temperature of models printed with Bambu ASA is 80 to 90 °C, and the time is 6 to 12 hours.Bambu Lab, Bambu Filament Technical Data Sheet - ASAp. 3: Annealing note
UV and outdoor: described in wordsBambu ASA is a highly durable material that offers exceptional UV, weather, mechanical, and thermal resistance.UV / weatherBambu Lab, Bambu Filament Technical Data Sheet - ASAp. 1

Polymaker ASAStrength XY, MPa38.6Strength Z, MPa30Modulus XY, GPa2.17Charpy notched, kJ/m²10.5HDT 0.45, °C103HDT 1.8, °C100Price, CAD/kg39Nozzle, °C230–260Bed, °C75–95Chamber, °CnoneDrying, °C, h707 h

Polymaker ASAPolymaker

Published values

Property	As published	Conditions	On the Overview
Polymaker, PolyLite ASA Technical Data Sheet16 valuesThe same values also in Polymaker, Polymaker™ ASA Technical Data Sheet and Polymaker, Technical Data Sheet PolyLite ™️ ASA.Unless a row says otherwise: printed specimen as printed All specimens were conditioned at room temperature for 24 h prior to testing print settings Printed at 260 °C nozzle, 80 °C bed, 2 shells, 4 top and bottom layers, 100% infill, 70 °C environmental temperature, cooling fan off (p. 5: how to make specimens)
Tensile modulus XY	2174.6 ± 41.1 MPap. 4: Young's modulus (X-Y)	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Tensile modulus Z	1971.6 ± 78.8 MPap. 4: Young's modulus (Z)	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Tensile strength (yield or break not stated) XY	38.6 ± 0.3 MPap. 4: Tensile strength (X-Y)	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Tensile strength (yield or break not stated) Z	30.0 ± 0.5 MPap. 4: Tensile strength (Z)	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Elongation at break XY	4.4 ± 1.0 %p. 4: Elongation at break (X-Y)	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Elongation at break Z	2.4 ± 0.1 %p. 4: Elongation at break (Z)	ISO 527, GB/T 1040 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Flexural modulus XY	1939.7 ± 50.4 M P ap. 4: Bending modulus (X-Y)	ISO 178, GB/T 9341 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Flexural strength XY	60.9 ± 0.9 M P ap. 4: Bending strength (X-Y)	ISO 178, GB/T 9341 moisture All specimens were conditioned at room temperature for 24h prior to testing	in the median
Charpy impact strength XY	10.5 ± 0.6 kJ /m2p. 4: Charpy impact strength (X-Y)	ISO 179, GB/T 1043 moisture All specimens were conditioned at room temperature for 24h prior to testing notched	in the median
HDT at 0.45 MPa	102.6 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa	ISO 75 As the sheet prints it: ISO 75 0.45MPa	in the median
HDT at 1.8 MPa	100.2 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa	ISO 75 As the sheet prints it: ISO 75 1.8MPa	in the median
Glass transition temperature	97.8 °Cp. 3: Glass transition temperature	specimen not stated, DSC As the sheet prints it: DSC, 10°C/min treatment not statedprint settings not stated	not in the median: another value of this product is in it
Vicat softening temperature	105.3 °Cp. 3: Vicat softening temperature	ISO 306, GB/T 1633
Density	1.13 g/cm3p. 2: Densityalso in Polymaker, Polymaker™ ASA Technical Data Sheetalso in Polymaker, Technical Data Sheet PolyLite ™️ ASA	specimen not stated, ISO 1183, GB/T 1033tested at 23 °Ctreatment not statedprint settings not stated
Water absorption	0.40 %p. 2: Equilibrium water absorptionalso in Polymaker, Technical Data Sheet PolyLite ™️ ASAalso in Polymaker, Polymaker™ ASA Technical Data Sheet	specimen not stated, no standard statedtreatment not statedprint settings not stated
Melt mass-flow rate	25 g/10minp. 2: Melt indexalso in Polymaker, Technical Data Sheet PolyLite ™️ ASA	specimen not stated, no standard named As the sheet prints it: 220°C, 10 kg treatment not statedprint settings not stated

Polymaker, Technical Data Sheet PolyLite ™️ ASA12 valuesThe same values also in Polymaker, Polymaker™ ASA Technical Data Sheet.Unless a row says otherwise: printed specimen print settings Printing temperature 260 °C; Bed temperature 90 °C; Shell 2; Top & bottom layer 3; Infill 100 %; Environmental temperature 90 °C; Cooling fan OFF
Tensile modulus XY	2379 ± 157 MPap. 4: Young’s modulus (X-Y)also in Polymaker, Polymaker™ ASA Technical Data Sheet	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Tensile modulus Z	1965 ± 136 MPap. 4: Young’s modulus (Z)also in Polymaker, Polymaker™ ASA Technical Data Sheet	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Tensile strength (yield or break not stated) XY	43.8 ± 0.8 MPap. 4: Tensile strength (X-Y)also in Polymaker, Polymaker™ ASA Technical Data Sheet	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Tensile strength (yield or break not stated) Z	32 ± 1.8 MPap. 4: Tensile strength (Z)also in Polymaker, Polymaker™ ASA Technical Data Sheet	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Elongation at break XY	6.7 ± 0.6 %p. 4: Elongation at break (X-Y)	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Elongation at break Z	1.65 ± 0.2 %p. 4: Elongation at break (Z)	ISO 527, GB/T 1040	not in the median: another value of this product is in it
Flexural modulus XY	3206 ± 108 MPap. 4: Bending modulus (X-Y)	ISO 178, GB/T 9341	not in the median: another value of this product is in it
Flexural strength XY	73.4 ± 2.1 MPap. 4: Bending strength (X-Y)	ISO 178, GB/T 9341	not in the median: another value of this product is in it
Charpy impact strength	10.3 ± 0.4 kJ/m2p. 4: Notched Charpy impact	no standard stated	not in the median: another value of this product is in it
HDT at 0.45 MPa	103 °Cp. 3: Heat deflection temperature ISO 75 0.45MPaalso in Polymaker, Polymaker™ ASA Technical Data Sheet	ISO 75 As the sheet prints it: 0.45MPa 75 ISO 75 print settings not stated	not in the median: another value of this product is in it
HDT at 1.8 MPa	100 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa	ISO 75 As the sheet prints it: 1.8MPa 75 ISO 75 print settings not stated	not in the median: another value of this product is in it
Vicat softening temperature	105 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633also in Polymaker, Polymaker™ ASA Technical Data Sheet	ISO 306, GB/T 1633 As the sheet prints it: 306 ISO 306 GB/T 1633 print settings not stated

Polymaker, Polymaker™ ASA Technical Data Sheet3 valuesThe same values also in Polymaker, Technical Data Sheet PolyLite ™️ ASA.Unless a row says otherwise: printed specimennotched print settings Printing temperature 260°C; Infill 100%; Bed temperature 90°C; Shell 2; Top & bottom layer 3; Cooling fan OFF; Environmental Temperature 90°C
Charpy impact strength XY	10.3 ± 0.4 kJ/m2p. 1: Notched Charpy impact strength (X-Y)	ISO 179, GB/T 1043	not in the median: another value of this product is in it
Charpy impact strength Z	6.7 ± 1.4 kJ/m2p. 1: Notched Charpy impact strength (Z)	no standard stated	not in the median: measured on a bar in another orientation
Glass transition temperature	98 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in Polymaker, Technical Data Sheet PolyLite ™️ ASA	DSCprint settings not stated	in the median

Print settings

Nozzle: 230–260 °Cown data sheet
Bed: 75–95 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 70 °C for 7 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Polymaker, Polymaker ASA official product page; drying in Polymaker, Polymaker ASA official product page.

Its 4 print profiles, in the documents' words

Nozzle 230-260°C; Bed 75-95°C; Drying 70°C/7HPolymaker, Polymaker™ ASA Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: *Based on 0.4mm nozzle
Nozzle 230 – 260 (℃); Bed 75 – 95 (˚C); Chamber Needed (ambient temperature); Drying 70˚C for 7hPolymaker, Technical Data Sheet PolyLite ™️ ASAp. 4: Recommended printing settings: Nozzle temperature; p. 4: Closure Chamber; p. 4: Drying setting
Nozzle 240 – 260 (℃); Bed 75 - 95 (˚C); Chamber Room temperature - 90 (˚C)Polymaker, PolyLite ASA Technical Data Sheetp. 4: Recommended printing settings: Nozzle temperature; Build plate temperature; Environmental temperature; Build surface material
Nozzle 240˚C - 260˚C; Bed 75˚C - 95˚C; Drying 70˚C for 6h (Only if the material has absorbed moisture)Polymaker, Polymaker ASA official product pagep. 1: Print Settings; p. 1: Technical Specifications: Enclosure

Price

39.5 CAD/kgthe median of its 2 regular prices in the sample

2 listings

Voxel Factory: 39 CAD/kgPolymaker PolyLite ASA 1.75mm 1kg / Black (SKU PMK-ASA-BLK-175-1KG)in its price; seen 30 Sep 2026
DigitMakers: 40 CAD/kgPolyLite™ ASA - Various Colors (1.75mm 1000g) / White (SKU PLMK-FL-PLITE-ASA-1.75mm-1kg-WHT)in its price; seen 30 Sep 2026

Its 5 documents

What the maker says (7)

BenefitsIts UV resistance and excellent mechanical properties make it the perfect choice for real life applications.Polymaker, PolyLite ASA Technical Data Sheetp. 2
BenefitsPolyLite™ ASA is an alternative to ABS with an improved weather resistance.Polymaker, PolyLite ASA Technical Data Sheetp. 2
Supports and removalRecommended support material PolyDissolve™ S2Polymaker, PolyLite ASA Technical Data Sheetp. 4
BenefitsIts UV resistance and excellent mechanical properties make it the perfect choice for real life applications.Polymaker, Polymaker™ ASA Technical Data Sheetp. 1
BenefitsPolymaker™ ASA is an alternative to ABS with an improved weather resistance.Polymaker, Polymaker™ ASA Technical Data Sheetp. 1
Good forPerfect for Outdoor and Functional Parts: Choose Polymaker™ ASA filament for any project that demands UV resistance, weather durability, and strong mechanical properties, perfect for outdoor 3D printing and long-lasting results.Polymaker, Polymaker ASA official product pagep. 1: Description, intended uses
Pitfalls and limitationsPrinting Temperature: 240˚C - 260˚C Bed Temperature: 75˚C - 95˚C Printing Speed: Up to 200mm/s Fan: OFF Direct Drive: Retraction Distance: 1mm Retraction Speed: 20mm/s Indirect Drive: Retraction Distance: 3mm Retraction Speed: 40mm/s Drying Settings: 70˚C for 6h (Only if the material has absorbed moisture) Suggested Drying Hardware:Polymaker, Polymaker ASA official product pagep. 1: Print Settings, revision differences

Chemicals and environment (5)

Acid resistance: resistantGoodEffect of weak acids · weakPolymaker, Polymaker™ ASA Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak acids
Acid resistance: not resistantPoorEffect of strong acids · strongPolymaker, Polymaker™ ASA Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong acids
Alkali resistance: resistantGoodEffect of weak alkalis · weakPolymaker, Polymaker™ ASA Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of weak alkalis
Alkali resistance: limitedFairEffect of strong alkalis · strongPolymaker, Polymaker™ ASA Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of strong alkalis
Oil and grease resistance: resistantGoodEffect of oils and greasePolymaker, Polymaker™ ASA Technical Data Sheetp. 1: CHEMICAL RESISTANCE DATA, Effect of oils and grease

QIDI ASAStrength XY, MPa38.5Strength Z, MPa27.9Modulus XY, GPa2.32Charpy notched, kJ/m²12.9HDT 0.45, °C93HDT 1.8, °C83Price, CAD/kg—Nozzle, °C240–260Bed, °C100–110Chamber, °C60–80Drying, °C, h70–804–6 h

QIDI ASAQIDI

Published values

Property	As published	Conditions	On the Overview
QIDI, Technical Data Sheet QIDI ASA17 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	2317 ± 246.0 MPap. 3: 杨氏模量(X-Y) ISO 527 Young's Modulus	ISO 527	in the median
Tensile modulus Z	2037 ± 64 MPap. 3: 杨氏模量(Z) ISO 527 Young's Modulus	ISO 527	in the median
Tensile yield strength XY	38.5 ± 1.60 MPap. 3: 拉伸屈服强度(X-Y) Tensile yield strength	no standard stated	in the median
Tensile break strength XY	32.23 ± 1.13 MPap. 3: 拉伸断裂强度(X-Y) Tensile breaking strength	no standard stated	not in the median: another value of this product is in it
Tensile break strength Z	27.87 ± 0.42 MPap. 3: 拉伸断裂强度(Z) Tensile breaking strength	no standard stated	in the median
Elongation at break XY	5.2 ± 1.40 %p. 3: 断裂伸长率(X-Y) Elongation at break	no standard stated	in the median
Elongation at break Z	2.43 ± 0.27 %p. 3: 断裂伸长率(Z) Elongation at break	no standard stated	in the median
Elongation at yield XY	2.38 ± 0.23 %p. 3: 屈服伸长率(X-Y) Yield elongation	no standard stated	listed under other properties
Flexural modulus XY	2399 ± 147 MPap. 3: 弯曲模量(X-Y) Bending Modulus	no standard stated	in the median
Flexural strength XY	64.49 ± 1.3 MPap. 3: 弯曲强度(X-Y) Bending strength	no standard stated	in the median
Charpy impact strength XY	12.9 ± 0.9 KJ/㎡p. 3: 缺口冲击强度(X-Y) ISO 179 Charpy impact strength	ISO 179notched	in the median
HDT at 0.45 MPa	93 °Cp. 2: Determination of temperature	no standard named As the sheet prints it: 0.45MPa	in the median
HDT at 1.8 MPa	83 °Cp. 2: 热变形温度 ISO 75:Method A	ISO 75 As the sheet prints it: 1.8MPa ISO 75	in the median
Glass transition temperature	98 °Cp. 2: Density 玻璃化转变温度 ISO 11357 Glass transition temperature	specimen not stated, ISO 11357	in the median
Vicat softening temperature	101 °Cp. 2: 维卡软温度 ISO 306 Vicat softening temperature	ISO 306
Density	1.07 g/cm³p. 2: 密度 ISO 1183 Density	specimen not stated, ISO 1183
Melt mass-flow rate	5.6 g/10minp. 2: Melt index	specimen not stated, no standard stated
QIDI, QIDI Filament Guide \| Choose the Right Filament2 values
Tensile strength (yield or break not stated) Z	27.87MPap. 1: Tensile Strength - Z	no standard stated	not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding
Water absorption	0.3%p. 1: Saturated Water Absorption Rate	no standard stated after moisture conditioning saturation

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: 60–80 °Cown data sheet
Drying: optional: 70–80 °C for 4–6 hown data sheet
Hardened nozzle: not neededown data sheet

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in QIDI, QIDI Filament Guide | Choose the Right Filament.

Its 2 print profiles, in the documents' words

Nozzle 240-260°C; Bed 100-110°C; Chamber please keep the chamber temperature between 60-80°C; Drying If you find the printing quality decreases after ASA has been exposed in the air for a long time, please dry the filament at 70-80°C for 4-6h.QIDI, Technical Data Sheet QIDI ASAp. 4: Nozzle temperature, Build plate temperature, Additional Suggestions
Nozzle 240-260°C; Bed Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C); Drying Optional; Blast Drying Oven: 70-80°C / 4-6 hQIDI, QIDI Filament Guide | Choose the Right Filamentp. 1: Is drying highly recommended?; p. 1: Recommended hardware settings; p. 1: Bed Temperature & Type; p. 1: Extruder heat range

Price

Not in the price sample.

Its 3 documents

What the maker says (6)

Good forIt is a good choice for outdoor application with its excellent aging resistance and weather resistance.QIDI, Technical Data Sheet QIDI ASAp. 1
BenefitsIts aging resistance can be 10 times higher than that of traditional ABS filaments.QIDI, Technical Data Sheet QIDI ASAp. 1
Odour and emissionsQIDI ASA gives out minimal odor compared with other traditional ABS filaments during printing.QIDI, Technical Data Sheet QIDI ASAp. 1
Supports and removalQIDI S-White Quick-Remove Support Material is a good support material for QIDI ASA, and it solves the question of poor support surface quality when QIDI ASA works as a self-support material.QIDI, Technical Data Sheet QIDI ASAp. 2
Warping and shrinkagePlease keep the chamber closed to avoid warping and layer separation issues during the process.QIDI, Technical Data Sheet QIDI ASAp. 4
Printing adviceCompared with PLA and PETG filaments, ASA needs a higher environment temperature to release the residual stress during printing.QIDI, Technical Data Sheet QIDI ASAp. 4

Chemicals and environment (1)

UV and outdoor: described in wordsQIDI ASA can resist material degradation, aging and color fading which are caused by UV.UVQIDI, Technical Data Sheet QIDI ASAp. 1

Fiberlogy ASAStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa2.2Charpy notched, kJ/m²18IzodHDT 0.45, °C92HDT 1.8, °C86Price, CAD/kg—Nozzle, °C255–270Bed, °C90–110Chamber, °CenclosedDrying, °C, h804 h

Fiberlogy ASAFiberlogy

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ASA13 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	2200 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	45 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	45 MPap. 1: Tensile Strength @ Break ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	30 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	5 %p. 1: Elongation @ Yield ISO 527 %	specimen not stated, ISO 527	listed under other properties
Flexural modulus orientation not stated	1900 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	80 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	18 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 0.45 MPa	92 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	86 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ISO 75 °C	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature Tg DSC °C	specimen not stated, no standard stated	in the median
Vicat softening temperature	100 °Cp. 1: Vicat Softening Temperature ISO 306 °C	specimen not stated, ISO 306
Continuous service temperature	50 °Cp. 1: Continuous Use Temperature (UL Yellow Card) UL 746 °C	specimen not stated, no standard named As the sheet prints it: UL 746

Fiberlogy, TECHNICAL DATA SHEET Fiberlogy ASA8 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	2500 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	43 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: another value of this product is in it
Elongation at break orientation not stated	25 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: another value of this product is in it
Elongation at yield orientation not stated	3 %p. 1: Elongation @ Yield ISO 527 %	specimen not stated, ISO 527	listed under other properties
Izod impact strength	10 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°C	not in the median: another value of this product is in it
HDT at 0.45 MPa	96 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ASTM D648 °C	ASTM D648 As the sheet prints it: 0.45 MPa ASTM D648	not in the median: another value of this product is in it
HDT at 1.8 MPa	87 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ASTM D648 °C	ASTM D648 As the sheet prints it: 1.8 MPa ASTM D648	not in the median: another value of this product is in it
Vicat softening temperature	96 °Cp. 1: Vicat Softening Temperature ASTM D1525 °C	specimen not stated, ASTM D1525
Fiberlogy, ASA Filament2 valuesUnless a row says otherwise: specimen not stated
Izod impact strength orientation not stated	10 kJ/m²p. 1: Izod impact strength (notched) @ 23°C	ISO 180tested at 23°C	not in the median: another value of this product is in it
Density	1.07 g/cm³p. 1: Density	no standard stated

Print settings

Nozzle: 255–270 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 80 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, ASA Filament.

Its 3 print profiles, in the documents' words

Nozzle 255°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ASAp. 1: Recommended printing settings
Nozzle 255°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy ASAp. 1: Recommended printing settings
Nozzle 255–270°C; Bed 110°C; Drying 80°C / 4 hoursFiberlogy, ASA Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber

Price

Not in the price sample.

Its 4 documents

What the maker says (1)

Good forit is ideal for producing parts intended for outdoor use, retaining its properties and color for a long timeFiberlogy, ASA Filamentp. 1

Anycubic ASAStrength XY, MPa41Strength Z, MPa24Modulus XY, GPa2.22Charpy notched, kJ/m²—HDT 0.45, °C90HDT 1.8, °C—Price, CAD/kg—Nozzle, °C255–275Bed, °C80–100Chamber, °CenclosedDrying, °C, h70–808–12 h

Anycubic ASAAnycubic

Published values

Property	As published	Conditions	On the Overview
Anycubic, Anycubic ASA13 values
Tensile modulus XY	2220 MPap. 1: Young's Modulus / MPa (X-Y)	ISO 527	in the median
Tensile strength (yield or break not stated) XY	41 MPap. 1: Tensile Strength / MPa (X-Y)	ISO 527	in the median
Tensile strength (yield or break not stated) Z	24 MPap. 1: Tensile Strength / MPa (Z)	ISO 527	in the median
Elongation at break XY	15 %p. 1: Elongation at Break / % (X-Y)	ISO 527	in the median
Flexural modulus XY	1845 MPap. 1: Bending Modulus / MPa (X-Y)	ISO 178	in the median
Flexural strength XY	62 MPap. 1: Bending Strength / MPa (X-Y)	ISO 178	in the median
Izod impact strength XY	36 kJ/m²p. 1: Izod Impact Strength (kJ/m²) (X-Y)	ISO 179	not in the median: notch not stated
HDT at 0.45 MPa	90 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃	ISO 75 As the sheet prints it: 0.45MPa ISO 75-2	in the median
Glass transition temperature	103 ℃p. 2: Glass Transition Temperature ISO 11357-1, 10℃/min ℃	ISO 11357 As the sheet prints it: ISO 11357-1	in the median
Vicat softening temperature	95 ℃p. 2: Vicat Softening Temperature (VST) ISO 306, 10N ℃	ISO 306 As the sheet prints it: VST 10N ISO 306
Density	1.07 g/cm3p. 1: Density/(g/cm³) ISO 1183,at 23°C g/cm3	ISO 1183 As the sheet prints it: at 23°C ISO 1183 tested at 23°C
Moisture content	0.27 %p. 1: Moisture Content ISO 787-2 %	ISO 787 As the sheet prints it: ISO 787-2
Melt mass-flow rate	18.6 ± 1.57 g/10minp. 1: Melt Index/ ( g/10min) ISO 1133 g/10min	ISO 1133 As the sheet prints it: g/10min ISO 1133

Print settings

Nozzle: 255–275 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 70–80 °C for 8–12 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 255-275; Bed 80-100; Drying 70-80℃, 8-12hAnycubic, Anycubic ASAp. 2: Recommended printing settings; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Recommended Printing Parameters

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Good forAnycubic ASA is a weather- and temperature-resistant filament, featuring high-impact resistance as well as rain and UV resistance, making it suitable for outdoor environments.Anycubic, Anycubic ASAp. 1

Eryone ASAStrength XY, MPa30.2Strength Z, MPa15Modulus XY, GPa0.943Charpy notched, kJ/m²—HDT 0.45, °C95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–260Bed, °C75–90Chamber, °CenclosedDrying, °C, h75–856 h

Eryone ASAEryone

Published values

Property	As published	Conditions	On the Overview
Eryone, Technical Data Sheet (TDS) ASA12 valuesUnless a row says otherwise: printed specimen print settings printing temperature=260 ° C, printing speed=80mm/s, base plate 100 ° C, filling=100%, nozzle diameter=0.4mm
Tensile modulus XY	942.5 MPap. 2: Tensile modulus X-Y 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006	in the median
Tensile modulus Z (X-Z)	912.7 MPap. 2: Tensile modulus X-Z 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006	in the median
Tensile strength (yield or break not stated) XY	30.2 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4	in the median
Tensile strength (yield or break not stated) Z (X-Z)	15 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa	GB/T 1843 As the sheet prints it: 50mm/min GB/T 1843	in the median
Elongation at break Z	2.1 %p. 2: Elongation at breakX-Z 50mm/min GB/T 1040.2 %	GB/T 1040.2 As the sheet prints it: 50mm/min GB/T 1040.2	in the median
Flexural modulus orientation not stated	1702.2 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa	GB/T 9341 As the sheet prints it: 2mm/min GB/T 9341	in the median
Flexural strength orientation not stated	45.1 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa	GB/T 9341 As the sheet prints it: 2mm/min GB/T 9341	in the median
Charpy impact strength	31.5 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1043.1-2008 kJ/m2	GB/T 1043.1 As the sheet prints it: 2.75J GB/T 1043.1-2008	not in the median: notch not stated
HDT at 0.45 MPa	95 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃	specimen not stated; its document points to a moulded or resin bar, ASTM D648 As the sheet prints it: 0.45MPa ASTM D648 print settings not stated	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	106 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃	specimen not stated, ASTM D1525, ISO 306, GB/T 1633print settings not stated
Density	1.05 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³	specimen not stated, ASTM D792, ISO 1183, GB/T 1033 As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 tested at 21.5°Cprint settings not stated
Melt mass-flow rate	7 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min	specimen not stated, no standard named As the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg tested at 220°Cprint settings not stated

Print settings

Nozzle: 230–260 °Cown data sheet
Bed: 75–90 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 75–85 °C for 6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230-260 ℃; Bed 75-90℃; Drying 75℃-85, 6hEryone, Technical Data Sheet (TDS) ASAp. 1: Recommended printing settings; p. 1: Sealed printing; p. 1: Bed material

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

BenefitsAdditionally, ASA has excellent weather resistance, outstanding UV (ultraviolet) resistance, water resistance, thermal stability, and mechanical performance, making it the preferred material for outdoor applications and more everyday uses.Eryone, Technical Data Sheet (TDS) ASAp. 1

Eryone Hyper-Speed ASAStrength XY, MPa34.8Strength Z, MPa19Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C82HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–260Bed, °C75–90Chamber, °CenclosedDrying, °C, h75–856–8 h

Eryone Hyper-Speed ASAEryone

Published values

Property	As published	Conditions	On the Overview
Eryone, Technical Data Sheet (TDS) Hyper-Speed ASA14 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	1345.3 MPaphysically implausiblep. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006	not in the median: physically implausible as published
Tensile modulus Z (X-Z)	1233.5 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006 print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Tensile strength (yield or break not stated) XY	34.8 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4 print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Tensile strength (yield or break not stated) Z (X-Z)	19 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa	GB/T 1843 As the sheet prints it: 50mm/min GB/T 1843 print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Elongation at break XY	1.9 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 %	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4 print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Elongation at break Z (X-Z)	1.7 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 %	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4 print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Flexural modulus orientation not stated	1884.5 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa	GB/T 9341 As the sheet prints it: 2mm/min GB/T 9341 print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Flexural strength orientation not stated	52.7 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa	GB/T 9341 As the sheet prints it: 2mm/min GB/T 9341 print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	in the median
Charpy impact strength orientation not stated	30.5 kJ/m2p. 2: Charpy Impact strenght	GB/T 1843 As the sheet prints it: GB/T 1843; energy=2.75J	not in the median: notch not stated
Impact strength, test unclear	30.5 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2	GB/T 1843 As the sheet prints it: 2.75J GB/T 1843 Which test: probably Izod print settings printing temperature=265℃, printing speed=100mm/s, base plate 90 ° C, filling=100%, nozzle diameter=0.4mm	listed under other properties
HDT at 0.45 MPa	82 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃	specimen not stated; its document points to a moulded or resin bar, ASTM D648 As the sheet prints it: 0.45MPa ASTM D648	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	106 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃	specimen not stated, ASTM D1525, ISO 306, GB/T 1633
Density	1.05 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³	specimen not stated, ASTM D792, ISO 1183, GB/T 1033 As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 tested at 21.5°C
Melt mass-flow rate	7 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min	specimen not stated, no standard named As the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg tested at 220°C

Print settings

Nozzle: 230–260 °Cown data sheet
Bed: 75–90 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 75–85 °C for 6–8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230℃-260℃; Bed 75-90℃; Drying 75~85℃,6~8HEryone, Technical Data Sheet (TDS) Hyper-Speed ASAp. 1: Recommended printing settings; p. 1: Drying conditions; p. 1: Sealed printing; p. 1: Bed material

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

Good forHowever, ASA excels in weather resistance, making it more suitable for outdoor applications.Eryone, Technical Data Sheet (TDS) Hyper-Speed ASAp. 1
BenefitsBy enhancing the material's flow properties, it significantly increases printing speed, allowing for the production of more products.Eryone, Technical Data Sheet (TDS) Hyper-Speed ASAp. 1
Warping and shrinkageAdditionally, this material effectively relieves stress and reduces shrinkage, ensuring stability during the printing process.Eryone, Technical Data Sheet (TDS) Hyper-Speed ASAp. 1

SUNLU ASAStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa2.22Charpy notched, kJ/m²7IzodHDT 0.45, °C101HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C80–100Chamber, °CnoneDrying, °C, h80

SUNLU ASASUNLU

Published values

Property	As published	Conditions	On the Overview
SUNLU, TECHNICAL DATA SHEET ISO ASA15 valuesThe same values also in SUNLU, Product Information Self-restraint ASA (ASA).Unless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	39 ± 4 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 45 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Elongation at break XY	11 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min %	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 45 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Flexural modulus XY	2300 ± 300 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 45 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Flexural strength XY	68 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 45 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength XY	7 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 45 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength ZX	3.3 ± 1.5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 45 mm/s; Printing temperature 270 °C; Infill: 100%; 90° raster orientation	not in the median: unnotched
Hardness	81.5 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD	ISO 868 As the sheet prints it: 23℃ HA/HD ISO 868 tested at 23°C	listed under other properties
HDT XY, at 0.45 MPa	101 ± 2 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
Glass transition temperature	108 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, Product Information Self-restraint ASA (ASA)	ISO 11357 As the sheet prints it: ISO 11357-2	in the median
Vicat softening temperature	105 ℃p. 1: Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃also in SUNLU, Product Information Self-restraint ASA (ASA)	ISO 306 As the sheet prints it: 5kg ISO 306
Melting temperature	120 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃also in SUNLU, Product Information Self-restraint ASA (ASA)	ISO 11357 As the sheet prints it: ISO 11357-3
Decomposition temperature	≥392 ℃p. 1: @5%Decomposition Temp.also in SUNLU, Product Information Self-restraint ASA (ASA)	ISO 11358 As the sheet prints it: ISO 11358; rate=20 ℃/min; loss=5%
Density	1.04 g/cm3p. 1: Density ISO 1183 23℃ g/cm3	specimen not stated, ISO 1183 As the sheet prints it: 23℃ ISO 1183 tested at 23°C
Melt mass-flow rate	30.5 ± 3 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 220℃/10 kg g/10 min	ISO 1133 As the sheet prints it: 220℃/10 kg ISO 1133 tested at 220°C
Mould shrinkage orientation not stated	0.4-0.9 %p. 1: Moulding Shrinkagealso in SUNLU, Product Information Self-restraint ASA (ASA)	ISO 294tested at 23℃

SUNLU, Product Information Self-restraint ASA (ASA)9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	2220 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa	ASTM D638 As the sheet prints it: 1mm/min ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	50 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa	ASTM D638 As the sheet prints it: 50mm/min ASTM D638	not in the median: another value of this product is in it
Elongation at break orientation not stated	15 %p. 1: Elongation at break ASTM D638 50mm/min %	ASTM D638 As the sheet prints it: 50mm/min ASTM D638	not in the median: another value of this product is in it
Flexural modulus orientation not stated	2114 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa	ASTM D790 As the sheet prints it: 2mm/min ASTM D790	not in the median: another value of this product is in it
Flexural strength orientation not stated	73 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa	ASTM D790 As the sheet prints it: 2mm/min ASTM D790	not in the median: another value of this product is in it
Izod impact strength	18 KJ/㎡p. 1: IZOD Impact Notched ISO180 4mm, 23℃ KJ/㎡	ISO 180 As the sheet prints it: 4mm 23℃ ISO180 tested at 23°C	not in the median: another value of this product is in it
HDT at 0.45 MPa	96 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃	ASTM D648 As the sheet prints it: 0.45MPa ASTM D648	not in the median: another value of this product is in it
Density	1.06 g/cm3p. 1: Density ASTM D792 23℃ g/cm3	specimen not stated, ASTM D792 As the sheet prints it: 23℃ ASTM D792 tested at 23°C
Melt mass-flow rate	18 g/10minp. 1: Melt Flow Rate ASTM D1238 220℃/10kg g/10min	specimen not stated, ASTM D1238 As the sheet prints it: 220℃/10kg ASTM D1238 tested at 220°C

Print settings

Nozzle: 250–280 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 80 °Cown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 3 print profiles, in the documents' words

Nozzle 250-260; 260-280; Bed 80-100℃; Chamber Room Temperature; Drying 80℃SUNLU, TECHNICAL DATA SHEET ISO ASAp. 2: Recommended printing settings; p. 2: Nozzle Temp.
Nozzle Print Temp. 255-265℃; Bed 90-110℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information Self-restraint ASA (ASA)p. 2: Recommended printing settings; p. 2: Print Platform Temp.; p. 2: Room Temp.
Nozzle 265-275℃; Bed 90-110℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information Self-restraint ASA (ASA)p. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s

Price

Not in the price sample.

Its 3 documents

What the maker says (2)

Good forDecorative items, toys, accessories, and figurinesSUNLU, TECHNICAL DATA SHEET ISO ASAp. 1
Printing advicePrinting in an enclosed printerSUNLU, TECHNICAL DATA SHEET ISO ASAp. 1

Chemicals and environment (2)

UV and outdoor: described in wordsUV-, rain-, and heat-resistant, suitable for outdoor useUVSUNLU, TECHNICAL DATA SHEET ISO ASAp. 1
UV and outdoor: described in wordsUV/rain/heat resistant, suitable for outdoor useUVSUNLU, Product Information Self-restraint ASA (ASA)p. 1

Prusa Research Prusament ASA by Prusa PolymersStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa1.6Charpy notched, kJ/m²12HDT 0.45, °C93HDT 1.8, °C86Price, CAD/kg—Nozzle, °C250–270Bed, °C105–115Chamber, °CenclosedDrying, °C, h808 h

Prusa Research Prusament ASA by Prusa PolymersPrusa Research

Published values

Property	As published	Conditions	On the Overview
Prusa Research, Technical datasheet Prusament ASA by Prusa Polymers24 values
Tensile modulus XY	1.6 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label))	ISO 527 As the sheet prints it: ISO 527-1	in the median
Tensile modulus XZ	1.7 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label))	ISO 527 As the sheet prints it: ISO 527-1	not in the median: measured on a bar in another orientation
Tensile yield strength XY	42 ± 1 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label))	ISO 527 As the sheet prints it: ISO 527-1	in the median
Tensile yield strength orientation not stated	40 ± 1 MPap. 2: Tensile Yield Strength for Filament [MPa]	ISO 527	not in the median: measured on a filament strand
Tensile yield strength XZ	45 ± 2 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label))	ISO 527 As the sheet prints it: ISO 527-1	not in the median: measured on a bar in another orientation
Elongation at yield XY	3.4 ± 0.2 %p. 2: Elongation at Yield Point (Horizontal (source label))	ISO 527 As the sheet prints it: ISO 527-1	listed under other properties
Elongation at yield XZ	3.8 ± 0.2 %p. 2: Elongation at Yield Point (Vertical XZ (source label))	ISO 527 As the sheet prints it: ISO 527-1	listed under other properties
Flexural modulus XY	2.0 ± 0.1 GPap. 2: Flexural Modulus (Horizontal (source label))	ISO 178	in the median
Flexural modulus XZ	1.9 ± 0.1 GPap. 2: Flexural Modulus (Vertical XZ (source label))	ISO 178	not in the median: measured on a bar in another orientation
Flexural strength XY	64 ± 1 MPap. 2: Flexural Strength (Horizontal (source label))	ISO 178	in the median
Flexural strength XZ	69 ± 1 MPap. 2: Flexural Strength (Vertical XZ (source label))	ISO 178	not in the median: measured on a bar in another orientation
Charpy impact strength XY	25 ± 3 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Horizontal (source label))	ISO 179 As the sheet prints it: ISO 179-1; edgewise unnotched	not in the median: unnotched
Charpy impact strength XY	12 ± 1 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Horizontal (source label))	ISO 179 As the sheet prints it: ISO 179-1; edgewise	in the median
Charpy impact strength XZ	38 ± 11 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Vertical XZ (source label))	ISO 179 As the sheet prints it: ISO 179-1; edgewise unnotched	not in the median: unnotched
Charpy impact strength XZ	15 ± 3 kJ/m2p. 2: Impact Strength Charpy Notched [kJ/m2](5) (Vertical XZ (source label))	ISO 179 As the sheet prints it: ISO 179-1; edgewise	not in the median: measured on a bar in another orientation
Hardness	78 Shore Dp. 2: Hardness – Shore D	no standard stated	in the median
Interlayer adhesion strength orientation not stated	11 ± 1 MPap. 2: Interlayer Adhesion [MPa]	no standard named As the sheet prints it: Prusa Polymers
HDT at 0.45 MPa	93 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C]	ISO 75 As the sheet prints it: ISO 75; 0.45 MPa	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	86 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C]	ISO 75 As the sheet prints it: ISO 75; 1.80 MPa	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.07 g/cm3p. 2: Density [g/cm3]	ISO 1183
Water absorption	0.16 %p. 2: Moisture Absorption in 24 hours [%](2)	no standard named As the sheet prints it: Prusa Polymers; time=24 hours; humidity=22 % tested at 24 °C
Water absorption	0.17 %p. 2: Moisture Absorption in 7 days [%](2)	no standard named As the sheet prints it: Prusa Polymers; time=7 days; humidity=22 % tested at 24 °C
Melt mass-flow rate	20–24 g/10 minp. 2: MFR [g/10 min](1)	ISO 1133 As the sheet prints it: ISO 1133; 10 kg tested at 220 °C
Melt volume-flow rate	19–23 cm3/10 minp. 2: MVR [cm3/10 min](1)	ISO 1133 As the sheet prints it: ISO 1133; 10 kg tested at 220 °C

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 105–115 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle [°C] 260 ± 10; Bed [°C] 110 ± 5Prusa Research, Technical datasheet Prusament ASA by Prusa Polymersp. 1: Recommended printing settings: Nozzle Temperature; p. 1: Bed Type
No temperature statedPrusa Research, ASA Prusament is here: learn everything about the successor to ABS (Prusa blog)Printing inside an enclosure

Price

Not in the price sample.

Its 3 documents

What the maker says (3)

Printing adviceA 3 mm brim (or taller) can improve the adhesion of edges and corners of larger objects to the print sheet.Prusa Research, Technical datasheet Prusament ASA by Prusa Polymersp. 1
Printing adviceTo improve overhangs and bridges, set 30 % or higher cooling in PrusaSlicer.Prusa Research, Technical datasheet Prusament ASA by Prusa Polymersp. 1
Printing adviceFor larger prints without bridges, cooling turned off may bring better results.Prusa Research, Technical datasheet Prusament ASA by Prusa Polymersp. 1

BigRep ASAStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa1.8Charpy notched, kJ/m²30HDT 0.45, °C94HDT 1.8, °C86Price, CAD/kg—Nozzle, °C230–270Bed, °C60–100Chamber, °CenclosedDrying, °C, h804–6 h

BigRep ASABigRep

Only 2.85 mm filament was found; the H2C takes 1.75 mm.

Published values

Property	As published	Conditions	On the Overview
BigRep, FILAMENT ASA9 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1800 MPap. 1: Tensile Modulus (ISO 527)	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	40 MPap. 1: Tensile Strength (ISO 527)	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1900 MPap. 1: Flexural Modulus (ISO 178)	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	60 MPap. 1: Flexural Strength (ISO 178)	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	30 kJ/m²p. 1: Impact Strength, Notched (ISO 179)	ISO 179	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 0.45 MPa	94 °Cp. 1: HDT B - 0.45 MPa (ISO 75)	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
HDT at 1.8 MPa	86 °Cp. 1: HDT A - 1.8 MPa (ISO 75)	ISO 75 As the sheet prints it: 1.8 MPa ISO 75	in the median
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature (Tg) (DSC)	DSC As the sheet prints it: Tg DSC	in the median
Density	1.09 g/cm³p. 1: Density (ISO 1183)	ISO 1183

Print settings

Nozzle: 230–270 °Cown data sheet
Bed: 60–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 4–6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230 - 270 °C; Bed 60 - 100 °C; Drying 80 °C for 4 - 6 hoursBigRep, FILAMENT ASAp. 1: Recommended printing settings; p. 1: Bed Temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

BenefitsBigRep ASA is a strong, engineering-grade 3D printing filament that can withstand exposure to the elements thanks to excellent weather and UV resistance.BigRep, FILAMENT ASAp. 1

3DXTECH 3DXMAX ASAStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa2.01Charpy notched, kJ/m²—HDT 0.45, °C95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C235–255Bed, °C90–110Chamber, °C—Drying, °C, h804 h

3DXTECH 3DXMAX ASA3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament8 valuesUnless a row says otherwise: printed specimen print settings Printed Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 245°C Bed Temp: 110°C Specimen Orientation: XY Flat
Tensile modulus XY	2010 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	in the median
Tensile break strength XY	45 MPap. 1: Tensile Strength, Break ISO 527 MPa	ISO 527	in the median
Elongation at break XY	10 %p. 1: Tensile Elongation, Break ISO 527 %	ISO 527	in the median
Flexural modulus XY	2000 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	in the median
Flexural strength XY	78 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	in the median
HDT at 0.45 MPa	95 °Cp. 1: Deflection Temperature at 0.45 ISO 75 °C	ISO 75 As the sheet prints it: ISO 75, 0.45 MPa (66psi)	in the median
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature (Tg) DSC °C	DSC As the sheet prints it: Tg DSC °C	in the median
Density	1.07 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183 As the sheet prints it: 1183 g/cc ISO 1183

Print settings

Nozzle: 235–255 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: not stated
Drying: 80 °C for 4 hown data sheet
Hardened nozzle: not neededown data sheet

Its 2 print profiles, in the documents' words

No temperature stated3DXTECH, Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
Nozzle 235-255C; Bed 90-110C; Chamber Recommended; Drying 80C for 4 hours3DXTECH, 3DXMAX® ASAp. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs

Price

Not in the price sample.

1 listing: 1 with no regular price per kilogram recorded

3D Printing Canada: 64 per kg, sale priceDark Grey - 1.75mm 3DXTech 3DXMAX® ASA Filament - 1kg (SKU ASA1011000GY2)not used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 3 documents

What the maker says (10)

BenefitsHighly resistant to ultra-violet radiation and sunlight3DXTECH, 3DXMAX® ASAp. 1
BenefitsExcellent mechanical and thermal properties (Tg of 105C)3DXTECH, 3DXMAX® ASAp. 1
Good forSturdy and rugged against the weather, ideal for an outdoor part3DXTECH, 3DXMAX® ASAp. 1
BenefitsEasier to print than most industrial-grade materials3DXTECH, 3DXMAX® ASAp. 1
Surface finishVariety of colors and beautiful, low-gloss finish to make your models pop!3DXTECH, 3DXMAX® ASAp. 1
Benefits3DXMAX® ASA (Acrylonitirle Styrene Acrylate) is a UV-resistant, famously weatherable polymer.3DXTECH, 3DXMAX® ASAp. 1
Surface finishOur ASA has a low-gloss matte finish which makes it the perfect filament for technical-looking prints, especially when you don’t want the high-gloss surface finish often associated with 3D printing materials like ABS, PETG, or PLA.3DXTECH, 3DXMAX® ASAp. 1
Printing adviceHeated Chamber Recommended3DXTECH, 3DXMAX® ASAp. 1
Nozzle wearNozzle Specs No special concerns3DXTECH, 3DXMAX® ASAp. 1
Moisture sensitivityDrying Specs 80C for 4 hours3DXTECH, 3DXMAX® ASAp. 1

3DXTECH Triton ASA Model MaterialStrength XY, MPa31Strength Z, MPa—Modulus XY, GPa2.05Charpy notched, kJ/m²—HDT 0.45, °C98HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

3DXTECH Triton ASA Model Material3DXTECH

Published values

Property	As published	Conditions	On the Overview
3DXTECH, Technical Data Sheet: Triton™ ASA Model Material8 values
Tensile modulus XY	2050 MPap. 1: Tensile Modulus	ISO 527	in the median
Tensile break strength XY	31 MPap. 1: Tensile Strength, Break	ISO 527	in the median
Elongation at break XY	6 %p. 1: Tensile Elongation, Break ISO 527 %	ISO 527	in the median
Flexural modulus XY	1800 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	in the median
Flexural strength XY	54 MPap. 1: Flexural Strength ISO 178 MPa	ISO 178	in the median
HDT at 0.45 MPa	98 °Cp. 1: Deflection Temperature at 0.45 MPa (66psi)	ISO 75 As the sheet prints it: ISO 75; 0.45 MPa	in the median
Glass transition temperature	105 °Cp. 1: Glass Transition Temperature DSC °C	no standard stated	in the median
Density	1.07 g/ccp. 1: Density ISO 1183 g/cc	ISO 1183

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its 2 documents

What the maker says (5)

Surface finishVariety of colors and beautiful, low-gloss finish to make your models pop!3DXTECH, TRITON3D™ ASA - Stratasys® Compatiblep. 1
BenefitsEasier to print than most industrial-grade materials3DXTECH, TRITON3D™ ASA - Stratasys® Compatiblep. 1
BenefitsExcellent mechanical and thermal properties3DXTECH, TRITON3D™ ASA - Stratasys® Compatiblep. 1
Good forFormulated to be compatible with your Stratasys® printers3DXTECH, TRITON3D™ ASA - Stratasys® Compatiblep. 1
Printing adviceBefore you get started, please take a moment to review our Material Handling Instructions to help achieve consistent, high-quality prints.3DXTECH, TRITON3D™ ASA - Stratasys® Compatiblep. 1

colorFabb ASAStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa2.1Charpy notched, kJ/m²10.5HDT 0.45, °C96HDT 1.8, °C87Price, CAD/kg31Nozzle, °C240–260Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

colorFabb ASAcolorFabb

Published values

Property	As published	Conditions	On the Overview
colorFabb, Technical datasheet colorFabb ASA11 valuesThe same values also in colorFabb, Technical datasheet ASA.Unless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2170 MPap. 1: Tensile Modulus MPa	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Tensile yield strength orientation not stated	49 MPap. 1: Tensile Strength (Yield) MPa	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Elongation at break orientation not stated	20 %p. 1: Elongation @ Break %	ASTM D638 As the sheet prints it: D 638	not in the median: another value of this product is in it
Elongation at yield orientation not stated	6 %p. 1: Elongation @ Yield %	ASTM D638 As the sheet prints it: D 638	listed under other properties
Flexural modulus orientation not stated	2300 MPap. 1: Flexural Modulus MPaalso in colorFabb, Technical datasheet ASA	ASTM D790 As the sheet prints it: D 790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	78.5 MPap. 1: Flexural Strength MPa	ASTM D790 As the sheet prints it: D 790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	29 J/mp. 1: Izod Impact strength, notched @ -30 °C J/m	ASTM D256 As the sheet prints it: -30 °C D 256 tested at -30°C	not in the median: in J/m
Hardness	107 Rockwell Rp. 1: Rockwell Hardness, R Scale -	ASTM D785 As the sheet prints it: D 785	listed under other properties
HDT at 0.45 MPa	96 °Cp. 1: Deflection Temperature @ 0.45 MPa °C	ASTM D648 As the sheet prints it: 0.45 MPa D 648	in the median
HDT at 1.8 MPa	87 °Cp. 1: Deflection Temperature @ 1.8 MPa °C	ASTM D648 As the sheet prints it: 1.8 MPa D 648	in the median
Vicat softening temperature	96 °Cp. 1: Vicat Softening Temperature °C	ASTM D1525 As the sheet prints it: D 1525
colorFabb, Technical datasheet ASA8 values
Tensile modulus XY	2100 MPap. 1: Youngs Modulus Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Tensile strength (yield or break not stated) XY	45 MPap. 1: Tensile Strength Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Elongation at break XY	6.5 %p. 1: Elongation at break Tensile, ISO 527-1A	ISO 527 As the sheet prints it: ISO 527-1A print settings The specimens have been printed in XY plane, using 0.15 mm layer height, 100% infill, 0,4 mm nozzle, 260 ˚C nozzle temperature and 100˚C bed temperature.	in the median
Flexural strength orientation not stated	80 MPap. 1: Flexural Strength Flexural, ISO 178	ISO 178	not in the median: measured on a moulded bar
Charpy impact strength XY	10.5 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179	ISO 179notched	in the median
Izod impact strength	140 J/mp. 1: Izod Impact Strength Izod Notch, ISO 180	ISO 180notched	not in the median: in J/m
HDT at 0.45 MPa	87 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75	ISO 75 As the sheet prints it: HDT B ISO 75	not in the median: measured on a moulded bar
Density	1.07 g/cm3p. 1: Density ISO 1183	ISO 1183

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 90–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle 240 – 260 °C; Bed 90 – 100 °CcolorFabb, Technical datasheet colorFabb ASAp. 1: Recommended printing settings
Nozzle 240-260 °C; Bed 90-100 °CcolorFabb, Technical datasheet ASAp. 2: Recommended printing settings

Price

30.8 CAD/kgits one regular price in the sample

1 listing

DigitMakers: 30.8 CAD/kgcolorFabb ASA Natural 1.75mm - 650g (SKU CFABB-ASA-NTRL-1.75-650G)in its price; seen 30 Sep 2026

Its 3 documents

What the maker says (7)

Good forThis material, therefore, is well suited for long-lasting outdoor applications.colorFabb, Technical datasheet ASAp. 1
BenefitsThe most important features of ASA are its inherent UV stability, and high temperature resistance up to 100˚C.colorFabb, Technical datasheet ASAp. 1
Warping and shrinkageTo reduce warping, we would advice to use the least amount of cooling possible.colorFabb, Technical datasheet ASAp. 2
Adhesion between layersAlso, for the best mechanical performance and layer adhesion, try printing with the least amount of cooling.colorFabb, Technical datasheet ASAp. 2
Good forThis material is well suited to be used for long lasting outdoor applications.colorFabb, Technical datasheet colorFabb ASAp. 1
BenefitsThe two most important features of ASA are its inherent UV stability and high temperature resistance of 96C.colorFabb, Technical datasheet colorFabb ASAp. 1
Adhesion between layersAlso for best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.colorFabb, Technical datasheet colorFabb ASAp. 1

MatterHackers ASAStrength XY, MPa49Strength Z, MPa—Modulus XY, GPa2.16Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C86Price, CAD/kg—Nozzle, °C240–260Bed, °C90–110Chamber, °CenclosedDrying, °C, h80–90

MatterHackers ASAMatterHackers

Published values

Property	As published	Conditions	On the Overview
MatterHackers, TECHNICAL DATA SHEET - PRO Series ASA10 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2160 MPap. 1: Tensile Modulus	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	49 Mpap. 1: Tensile Strength	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	25 %p. 1: Tensile Elongation	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2300 MPap. 2: Flexural Modulus	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	79 Mpap. 1: Flexural Strength	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	175 J/mp. 2: Izod Impact Strength, Notched	no standard named As the sheet prints it: ASTM256	not in the median: in J/m
HDT at 1.8 MPa	86 °cp. 2: Heat Deflection Temperature	ASTM D648 As the sheet prints it: ASTM D648 1.82 MPa	in the median
Glass transition temperature	95 °Cp. 2: Glass Transition Temperature	ASTM D1525	in the median
Density	1.07 g/cm3p. 2: Density	no standard stated
Melt mass-flow rate	12 g/10 minp. 2: Melt Flow Index	ASTM D1238

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80–90 °Cown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 250±10°C; Bed 100±10°C; Drying 80°C-90°C (not necessary but recommended)MatterHackers, TECHNICAL DATA SHEET - PRO Series ASAp. 2: Recommended printing settings; p. 2: Material Drying Temperature; p. 2: Build Surface Material

Price

Not in the price sample.

Its 2 documents

What the maker says (3)

Good forASA is an advanced 3D printing material that combines exceptional thermal and UV resistance, making it an ideal choice for parts that need to function in high-temperature environments or in outdoor conditions.MatterHackers, TECHNICAL DATA SHEET - PRO Series ASAp. 1
BenefitsHigh strength and durabilityMatterHackers, TECHNICAL DATA SHEET - PRO Series ASAp. 1
Moisture sensitivityMaterial Drying Temperature 80°C-90°C (not necessary but recommended)MatterHackers, TECHNICAL DATA SHEET - PRO Series ASAp. 2

Chemicals and environment (2)

UV and outdoor: described in wordsIts UV inhibitor prevents color change and mechanical property degradation, allowing for parts with long-lasting strength and visual properties.UVMatterHackers, TECHNICAL DATA SHEET - PRO Series ASAp. 1
UV and outdoor: described in wordsUnmatched UV resistanceUVMatterHackers, TECHNICAL DATA SHEET - PRO Series ASAp. 1

FormFutura ApolloXStrength XY, MPa47.5Strength Z, MPa—Modulus XY, GPa2.02Charpy notched, kJ/m²18HDT 0.45, °C—HDT 1.8, °C86Price, CAD/kg71Nozzle, °C230–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h45–6012 h

FormFutura ApolloXFormFutura

Data sheet shared with Spectrum ASA 275, Spectrum FlameGuard ASA 275 and FormFutura ReForm - rApollo: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet ApolloX™8 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	2020 Mpap. 1: Tensile modulus	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	47,5 Mpap. 1: Tensile strength	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	15 %p. 1: Elongation at break	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	18 KJ/m²p. 1: Impact strength	ISO 179tested at 23° C (73° F)notched	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	98° C °Cp. 1: Viscat softening temp.	ISO 306 As the sheet prints it: ISO 306; VST/A/50 (50° C/h, 10N)
Melting temperature	230 ± 10° C °Cp. 1: Melting termperature	ISO 294
Density	1.11 g/ccp. 1: Specific gravity	ISO 1183
Melt mass-flow rate	45 g/10minp. 1: Melt flow rate	ISO 1133
FormFutura, TECHNICAL DATA SHEET ApolloX6 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1800 MPap. 1: Tensile modulus	ASTM D638	not in the median: another value of this product is in it
Elongation at break orientation not stated	35 %p. 1: Elongation at break	ASTM D638	not in the median: another value of this product is in it
Flexural modulus orientation not stated	1900 MPap. 1: Flexural modulus	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	64 MPap. 1: Flexural strenght	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	94 °Cp. 1: Vicat softening temperature	ASTM D1525
Density	1,07 g/cm3p. 1: Specific gravity	no standard stated

Print settings

Nozzle: 230–280 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 45–60 °C for 12 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, Technical Data Sheet ApolloX™.

Its 2 print profiles, in the documents' words

Nozzle ± 235 - 255° CFormFutura, Technical Data Sheet ApolloX™p. 1: Recommended printing settings
Nozzle 230 - 280 °C; Bed 90-110°C; Drying Recommended 45-60°C 12 hFormFutura, TECHNICAL DATA SHEET ApolloXp. 1: Drying, Enclosure; p. 1: Bed temperature

Price

70.7 CAD/kgits one regular price in the sample

1 listing

DigitMakers: 70.7 CAD/kgFormFutura ApolloX - 750g 1.75mm / Black (SKU FFTURA-APOX-175BLCK-00750)in its price; seen 30 Sep 2026

Its 3 documents

What the maker says (4)

BenefitsApolloX™ is UV & weather resistant ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications.FormFutura, Technical Data Sheet ApolloX™p. 1
Warping and shrinkageApolloX™ has been modified to have great thermal stability & improved filament flow behavior and has zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection molding precision.FormFutura, Technical Data Sheet ApolloX™p. 1
Good forOutdoor equipmentFormFutura, TECHNICAL DATA SHEET ApolloXp. 1
Moisture sensitivityDry box NoFormFutura, TECHNICAL DATA SHEET ApolloXp. 1

FormFutura ReForm - rApolloStrength XY, MPa47.5Strength Z, MPa—Modulus XY, GPa1.8Charpy notched, kJ/m²18HDT 0.45, °C—HDT 1.8, °C86Price, CAD/kg—Nozzle, °C230–270Bed, °C60–80Chamber, °CenclosedDrying, °C, h45–6012 h

FormFutura ReForm - rApolloFormFutura

Data sheet shared with Spectrum ASA 275, Spectrum FlameGuard ASA 275 and FormFutura ApolloX: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
FormFutura, TECHNICAL DATA SHEET ReForm - rApollo6 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1800 MPap. 1: Tensile modulus	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	35 %p. 1: Elongation at break	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1900 MPap. 1: Flexural modulus	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	435 J/mp. 1: Impact strenght	ASTM D256 As the sheet prints it: ASTM D256; Izod notched 23°C notched	not in the median: in J/m
Vicat softening temperature	94 °Cp. 1: Vicat softening temperature	ASTM D1525
Density	1,07 g/cm3p. 1: Specific gravity	no standard stated

Print settings

Nozzle: 230–270 °Cown data sheet
Bed: 60–80 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 45–60 °C for 12 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 230 - 270 °C; Bed 60 - 80 °C; Drying Recommended 45 - 60 °C 12 hFormFutura, TECHNICAL DATA SHEET ReForm - rApollop. 1: Bed temperature, Drying, Enclosure, Nozzle temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

Good forOutdoor applicationsFormFutura, TECHNICAL DATA SHEET ReForm - rApollop. 1
Moisture sensitivityDry box NoFormFutura, TECHNICAL DATA SHEET ReForm - rApollop. 1

Chemicals and environment (1)

UV and outdoor: described in wordsUV- and weather resistantUV / weatherFormFutura, TECHNICAL DATA SHEET ReForm - rApollop. 1

Spectrum ASA 275Strength XY, MPa42Strength Z, MPa—Modulus XY, GPa1.8Charpy notched, kJ/m²18HDT 0.45, °C—HDT 1.8, °C86Price, CAD/kg—Nozzle, °C200–240Bed, °C40–60Chamber, °CenclosedDrying, °C, h45–6012 h

Spectrum ASA 275Spectrum

Data sheet shared with Spectrum FlameGuard ASA 275, FormFutura ApolloX and FormFutura ReForm - rApollo: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET ASA 27512 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1800 MPap. 1: Tensile Modulus, 23°C *	ASTM D638 As the sheet prints it: 23°C ASTM D638 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	42 MPap. 1: Tensile Strength, at Yield, 23°C *	ASTM D638 As the sheet prints it: at Yield 23°C ASTM D638 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	35 %p. 1: Tensile Elongation at Break, 23°C *	ASTM D638 As the sheet prints it: 23°C ASTM D638 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1900 MPap. 1: Flexural Modulus, 23°C **	ASTM D790 As the sheet prints it: 23°C ASTM D790 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	64 MPap. 1: Flexural Strength, 23°C **	ASTM D790 As the sheet prints it: 23°C ASTM D790 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	435 J/mp. 1: Izod Impact Strength, Notched, 3.2mm, 23°C	ASTM D256 As the sheet prints it: 3.2mm 23°C ASTM D256 tested at 23°C	not in the median: in J/m
Izod impact strength	60 J/mp. 1: Izod Impact Strength, Notched, 3.2mm, -30°C	ASTM D256 As the sheet prints it: 3.2mm -30°C ASTM D256 tested at -30°C	not in the median: in J/m
Hardness	92 Rockwell Rp. 1: Rockwell Hardness, R-Scale	ASTM D785	listed under other properties
HDT at 1.8 MPa	86 °Cp. 1: Heat Deflection Temperature	ASTM D648	in the median
Vicat softening temperature	94 °Ctranscription correctedp. 1: VICAT, 50N, 50°C/h	ASTM D1525 As the sheet prints it: 50N 50°C/h ASTM D1525
Density	1.07 g/cm3p. 1: Specific Gravity, 23°C	ASTM D792 As the sheet prints it: 23°C ASTM D792 tested at 23°C
Melt mass-flow rate	5 g/10minp. 1: Melt Flow Rate, 220°C, 10kg	ASTM D1238 As the sheet prints it: 220°C 10kg ASTM D1238 tested at 220°C

Print settings

Nozzle: 200–240 °Cown data sheet
Bed: 40–60 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 45–60 °C for 12 hFormFutura ApolloX's data sheet, shared
Hardened nozzle: not neededown data sheet

Its 3 print profiles, in the documents' words

Nozzle 200-240°C; Bed 40-60°CSpectrum, TECHNICAL DATA SHEET ASA 275p. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
No temperature statedSpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended

Price

Not in the price sample.

Its 4 documents

What the maker says (9)

BenefitsASA 275 is a material resistant to UV radiation and other weather conditions.Spectrum, TECHNICAL DATA SHEET ASA 275p. 1
Benefitsability to print on desktop printers without a heated chamberSpectrum, TECHNICAL DATA SHEET ASA 275p. 1
Surface finishglossy print surfaceSpectrum, TECHNICAL DATA SHEET ASA 275p. 1
Adhesion between layersThe composition of Spectrum ASA 275 has been specially modified to make the material more flexible, improve flow parameters, reduce shrinkage, and increase adhesion between layers.Spectrum, TECHNICAL DATA SHEET ASA 275p. 1
Adhesion between layersperfect interlayer adhesionSpectrum, TECHNICAL DATA SHEET ASA 275p. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET ASA 275p. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET ASA 275p. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET ASA 275p. 1
BenefitsEasy to print, excellent resistance to external exposure & weather conditions, high printing speed (up to 350mm/s)Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20

Chemicals and environment (1)

UV and outdoor: described in wordsresistance to UV radiationUVSpectrum, TECHNICAL DATA SHEET ASA 275p. 1

Spectrum FlameGuard ASA 275Strength XY, MPa42Strength Z, MPa—Modulus XY, GPa1.8Charpy notched, kJ/m²18HDT 0.45, °C—HDT 1.8, °C86Price, CAD/kg—Nozzle, °C200–240Bed, °C40–60Chamber, °CenclosedDrying, °C, h45–6012 h

Spectrum FlameGuard ASA 275Spectrum

Data sheet shared with Spectrum ASA 275, FormFutura ApolloX and FormFutura ReForm - rApollo: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET FlameGuard ASA 27514 valuesThe same values also in FormFutura, TECHNICAL DATA SHEET ApolloX and Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29.Unless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1800 MPap. 1: Tensile Modulus, 23°C, 50mm/min, 3.2mm	ASTM D638 As the sheet prints it: 23°C 50mm/min 3.2mm ASTM D638 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	42 MPap. 1: Tensile Strength, at Yield, 23°C, 50mm/min, 3.2mmalso in FormFutura, TECHNICAL DATA SHEET ApolloX	ASTM D638 As the sheet prints it: at Yield 23°C 50mm/min 3.2mm ASTM D638 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	35 %p. 1: Tensile Elongation at Break, 23°C, 50mm/min, 3.2mm	ASTM D638 As the sheet prints it: 23°C 50mm/min 3.2mm ASTM D638 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1900 MPap. 1: Flexural Modulus, 23°C, 15mm/min, 3.2mm	ASTM D790 As the sheet prints it: 23°C 15mm/min 3.2mm ASTM D790 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	64 MPap. 1: Flexural Strength, 23°C, 15mm/min, 3.2mm	ASTM D790 As the sheet prints it: 23°C 15mm/min 3.2mm ASTM D790 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	435 J/mp. 1: Izod Impact Strength, Notched, 3.2mm, 23°C	ASTM D256 As the sheet prints it: 3.2mm 23°C ASTM D256 tested at 23°C	not in the median: in J/m
Izod impact strength	60 J/mp. 1: Izod Impact Strength, Notched, 3.2mm, -30°C	ASTM D256 As the sheet prints it: 3.2mm -30°C ASTM D256 tested at -30°C	not in the median: in J/m
Izod impact strength	340 J/mp. 1: Izod Impact Strength, Notched, 6.4mm, 23°C	ASTM D256 As the sheet prints it: 6.4mm 23°C ASTM D256 tested at 23°C	not in the median: in J/m
Izod impact strength	60 J/mp. 1: Izod Impact Strength, Notched, 6.4mm, -30°C	ASTM D256 As the sheet prints it: 6.4mm -30°C ASTM D256 tested at -30°C	not in the median: in J/m
Hardness	92 Rockwell Rp. 1: Rockwell Hardness, R-Scale	ASTM D785	listed under other properties
HDT at 1.8 MPa	86 °Cp. 1: HDT, Edgewise, 1.82MPa, 6.4mm, Unannealedalso in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29	ASTM D648 As the sheet prints it: 1.82MPa Edgewise 6.4mm Unannealed ASTM D648 as printed Unannealed	in the median
Vicat softening temperature	94 °Cp. 1: VICAT, 50N, 50°C/h	ASTM D1525 As the sheet prints it: 50N ASTM D1525
Density	1.08 g/cm3p. 1: Specific Gravity, 23°C	no standard named As the sheet prints it: 23°C tested at 23°C
Melt mass-flow rate	5 g/10minp. 1: Melt Flow Rate, 220°C, 10kg	ASTM D1238 As the sheet prints it: 220°C 10kg ASTM D1238 tested at 220°C

Print settings

Nozzle: 200–240 °Cown data sheet
Bed: 40–60 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 45–60 °C for 12 hFormFutura ApolloX's data sheet, shared
Hardened nozzle: not neededown data sheet

Its print profile, in the documents' words

Nozzle 200-240°C; Bed 40-60°CSpectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.

Price

Not in the price sample.

1 listing: 1 with no regular price per kilogram recorded

3D Printing Canada: 65 per kg, sale priceBloody Red - Spectrum FlameGuard ASA 275 Filament - 1.75mm, 1kg (SKU 81567)not used: no regular price per kilogram recorded; seen 30 Sep 2026

Its 4 documents

What the maker says (8)

Good forIt combines excellent mechanical properties, UV resistance, and easy printability, making it ideal for durable prototypes and applications requiring enhanced fire protection.Spectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1
BenefitsPrintable on desktop printers without a heated chamberSpectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1
BenefitsDesigned to meet UL 94 V0 standardsSpectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1
BenefitsSpectrum FlameGuard ASA 275 is an advanced flame-retardant filament designed for 3D print-ing, meeting UL94 V0 standards for fire safety.Spectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1
Moisture sensitivityDry box not necessarySpectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1
Nozzle wearRuby or hardened nozzle not necessarySpectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1
Printing adviceClosed chamber recommended for larger printsSpectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1
BenefitsFlame-retardant ASA; weather-resistant; UL94 V0; easy to print; suitable for high speedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20

Chemicals and environment (1)

UV and outdoor: described in wordsExcellent resistance to outdoor exposureUVSpectrum, TECHNICAL DATA SHEET FlameGuard ASA 275p. 1

CreatBot ASAStrength XY, MPa38Strength Z, MPa—Modulus XY, GPa2.35Charpy notched, kJ/m²—HDT 0.45, °C90HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C100–110Chamber, °C60–80Drying, °C, h70–806–8 h

CreatBot ASACreatBot

Published values

Property	As published	Conditions	On the Overview
CreatBot, Technical Data Sheet:CreatBot ASA11 values
Tensile modulus XY	2350 MPap. 1: Young's modulus XY ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	38 MPap. 1: Tensile strength XY ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Elongation at break XY	5.2 %p. 1: Elongation at break XY ISO 527, GB/T 1040	ISO 527, GB/T 1040	in the median
Flexural modulus XY	2399 MPap. 1: Bending modulus XY ISO 178, GB/T 9341	ISO 178, GB/T 9341	in the median
Flexural strength XY	65 MPap. 1: Bending strength XY ISO 178, GB/T 9341	ISO 178, GB/T 9341	in the median
Charpy impact strength XY	12.9 kJ/m²p. 1: Impact strength XY ISO 179, GB/T 1043	ISO 179, GB/T 1043	not in the median: notch not stated
HDT at 0.45 MPa	90 ℃p. 1: Determination of ISO 75 , 0.45MPa temperature	ISO 75 As the sheet prints it: 0.45MPa ISO 75	in the median
Vicat softening temperature	101 ℃p. 1: Vicat softening temperature ISO 306,GB/T 1633	ISO 306, GB/T 1633
Melting temperature	98 ℃physically implausiblep. 1: Melting temperature DSC, 10℃/ min	DSC
Density	1.07 g/cm3p. 1: Physical Properties Test method Data Density ISO1183 Saturated water absorption	ISO 1183
Melt mass-flow rate	5.6 g/10 minp. 1: Melt index 340℃,2.16 kg	no standard named As the sheet prints it: 340℃,2.16 kg tested at 340°C

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: 60–80 °Cown data sheet
Drying: 70–80 °C for 6–8 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 2 print profiles, in the documents' words

Nozzle 240-260℃; Bed 100-110℃; Chamber 60-80℃; Drying 70-80℃,6-8 HCreatBot, Technical Data Sheet:CreatBot ASAp. 1: Recommended printing settings; p. 1: Pre-printing drying; p. 1: bed temperature
Nozzle 240-260℃; Bed 100-110℃; Chamber 60-80℃; Drying 70-80℃, 6-8 H (Convection drying oven)CreatBot, ASAp. 1: Technical Data Sheet table; p. 1: ASA Filament FAQ

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Printing adviceit is recommended to use an enclosed printing chamber or protective cover.CreatBot, ASAp. 1

Flashforge ASAStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa1.2Charpy notched, kJ/m²19IzodHDT 0.45, °C88HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C100–120Chamber, °C25–40Drying, °C, h80≥ 5 h

Flashforge ASAFlashforge

Published values

Property	As published	Conditions	On the Overview
Flashforge, Technical Data Sheet ASA Filament9 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	1200-1400 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa	ISO 527 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Tensile strength (yield or break not stated) XY	42-45 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa	ISO 527 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Elongation at break XY	9-12 %p. 1: Elongation at Break (X-Y) ISO 527 %	ISO 527 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Flexural strength XY	75-79 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa	ISO 178 print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
Izod impact strength XY	19-20 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2	ISO 180notched print settings Test Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 250 °C; Printing Speed 50mm/s; Wall Thickness 1.2mm; Infill 100%	in the median
HDT at 0.45 MPa	88 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃	ISO 75 As the sheet prints it: 0.455 MPa 66 psi ISO 75	in the median
Density	1.08-1.09 g/cm3p. 1: Density ISO 1183 g/cm3	specimen not stated, ISO 1183
Water absorption	1 %p. 1: Water Absorption (23℃/24h) ISO 62 %	specimen not stated, ISO 62 As the sheet prints it: 23℃/24h ISO 62 tested at 23°C
Melt mass-flow rate	20-25 g/10minp. 1: Melt Index MFR (220℃/10Kg) ISO 1133 g/10min	specimen not stated, ISO 1133 As the sheet prints it: 220℃/10Kg ISO 1133 tested at 220°C

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 100–120 °Cown data sheet
Heated chamber: 25–40 °Cown data sheet
Drying: 80 °C for ≥ 5 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240~260℃ (250℃ recommended); Bed 100~120℃ (110℃ recommended); Chamber Room temperature~40℃; Drying Using a hot dry air oven at 80℃ for at least 5 hours is recommendedFlashforge, Technical Data Sheet ASA Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Nozzle Diameter (recommended printing settings)

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

BenefitsASA filament has high tenacity, high impact resistance and weather resistance, and certain temperature resistance and anti-static property, and is generally suitable for different FFF 3D printers.Flashforge, Technical Data Sheet ASA Filamentp. 1
BenefitsEasy-to-print property/High tenacity/High impact resistance/Weather resistance.Flashforge, Technical Data Sheet ASA Filamentp. 1
Supports and removalRecommended Support Material Self-supporting, HIPSFlashforge, Technical Data Sheet ASA Filamentp. 2
Moisture sensitivityAs the ASA filament absorbs moisture easily, it should be dried before being used.Flashforge, Technical Data Sheet ASA Filamentp. 3

Raise3D Premium ASAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa2.38Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg57Nozzle, °C240–260Bed, °C75–95Chamber, °C50–70Drying, °C, h808 h

Raise3D Premium ASARaise3D

Published values

Property	As published	Conditions	On the Overview
Raise3D, Raise3D Premium ASA Technical Data Sheet11 valuesUnless a row says otherwise: printed specimen
Tensile modulus XY	2379 ± 157 MPap. 1: Young’s modulus (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040dry	in the median
Tensile modulus Z	2062 ± 76 MPap. 1: Young’s modulus ( Z ) ISO 527, GB/T 1040	ISO 527, GB/T 1040dry	in the median
Elongation at break XY	6.7 ± 0.6 %p. 1: Elongation at break (X-Y) ISO 527, GB/T 1040	ISO 527, GB/T 1040dry	in the median
Elongation at break Z	2.7 ± 0.3 %p. 1: Elongation at break ( Z ) ISO 527, GB/T 1040	ISO 527, GB/T 1040dry	in the median
Flexural modulus XY	3206 ± 108 MPap. 1: Bending modulus (X-Y) ISO 178, GB/T 9341	ISO 178, GB/T 9341dry	in the median
Charpy impact strength XY	10.3 ± 0.4 kJ/m²p. 1: Charpy impact strength(X-Y) ISO 179, GB/T 1043	ISO 179, GB/T 1043dry	not in the median: notch not stated
Charpy impact strength Z	6.7 ± 1.4 kJ/m²p. 1: Charpy impact strength( Z ) ISO 179, GB/T 1043	ISO 179, GB/T 1043dry	not in the median: notch not stated
Glass transition temperature	98 °Cp. 1: Glass transition temperature DSC, 10 °C /min	DSC	in the median
Vicat softening temperature	105 °Cp. 1: Vicat Softening temperature ASTM D1525 (ISO 306 GB/T 1633)	ASTM D1525, ISO 306, GB/T 1633
Density	1.10 g/cm³p. 1: Density ISO 1183, GB/T 1033	ISO 1183, GB/T 1033
Melt mass-flow rate	25 g/10 minp. 1: Melt index 220 °C, 10 kg	specimen not stated, no standard named As the sheet prints it: 220 °C 10 kg tested at 220°C

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 75–95 °Cown data sheet
Heated chamber: 50–70 °Cown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 - 260 (˚C); Bed 75 - 95 (°C); Chamber 50 - 70 (˚C)Raise3D, Raise3D Premium ASA Technical Data Sheetp. 2: Recommended printing settings: Nozzle temperature; p. 2: Build Surface material; p. 2: Note

Price

57.3 CAD/kgthe median of its 2 regular prices in the sample

2 listings

DigitMakers: 57 CAD/kgRaise3D Premium ASA Filament - Black 1.75mm 1kg (SKU RAISE3D-FL-ASA-1.75-1KG-BLK)in its price; seen 30 Sep 2026
Shop3D.ca: 57.5 CAD/kgRaise3D Premium ASA Filament - 1.75mm (1kg) / Black (SKU [S]5.11.19106A01)in its price; seen 30 Sep 2026

Its 2 documents

What the maker says (2)

BenefitsRaise3D Premium ASA is an alternative to ABS with an improved weather resistance.Raise3D, Raise3D Premium ASA Technical Data Sheetp. 1
BenefitsIts UV resistance and excellent mechanical properties make it the perfect choice for real life application.Raise3D, Raise3D Premium ASA Technical Data Sheetp. 1

AzureFilm ASA PrimeStrength XY, MPa37.6Strength Z, MPa9.4Modulus XY, GPa1.9Charpy notched, kJ/m²—HDT 0.45, °C97HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–250Bed, °C90Chamber, °C—Drying, °C, h—

AzureFilm ASA PrimeAzureFilm

Modified: undisclosed dense filler. Its values are kept out of the material's medians.

Published values

Property	As published	Conditions	On the Overview
AzureFilm, Technical Data Sheet 04.24 ASA Prime15 valuesUnless a row says otherwise: printed specimen print settings 100% infill; 2 shells; layer height of 0.2mm
Tensile modulus XY	1900 MPap. 1: Tensile Modulus (XY)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile modulus Z (ZX)	1600 MPap. 1: Tensile Modulus (ZX)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile modulus XZ	2000 MPap. 1: Tensile Modulus (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) XY	37.6 MPap. 1: Tensile Strength (XY)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile strength (yield or break not stated) Z (ZX)	9.4 MPap. 1: Tensile Strength (ZX)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: added filler or additive
Tensile strength (yield or break not stated) XZ	43.0 MPap. 1: Tensile Strength (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile yield strength XY	30.1 MPap. 1: Yield Strength (XY)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: another value of this product is in it
Tensile yield strength XZ	31.4 MPap. 1: Yield Strength (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Elongation at yield Z	0.6 %p. 1: Strain at Yield	ISO 527 As the sheet prints it: ISO 527-2	listed under other properties
Flexural modulus XY	1900 MPap. 1: Flexural Modus	ISO 178	not in the median: added filler or additive
Charpy impact strength XY	13.9 kJ/m²p. 1: Impact Strength	ISO 179print settings not stated	not in the median: notch not stated
HDT	97 °Cp. 1: Heat deflect. temp.	specimen not stated; its document points to a moulded or resin bar, ISO 75print settings not stated	not in the median: added filler or additive
Melting temperature	230 ± 10 °Cp. 1: Melting temp. ISO 294	specimen not stated, ISO 294print settings not stated
Density	1.15 g/ccp. 1: Specific gravity ISO 1133	specimen not stated, ISO 1133print settings not stated
Melt volume-flow rate	12.9 cm³/10 minp. 1: Melt flow rate	specimen not stated, ISO 1133print settings not stated

Print settings

Nozzle: 230–250 °Cown data sheet
Bed: 90 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 240±10 °C; Bed 90 °CAzureFilm, Technical Data Sheet 04.24 ASA Primep. 1: Bed temp.; p. 1: Bed surface; p. 1: Printing temp.

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

Good forUV and weather resistant, making it the perfect material for outdoor applications.AzureFilm, Technical Data Sheet 04.24 ASA Primep. 1
Warping and shrinkageASA Prime is our high-end zero warp engineering grade filament, based on regular ASA.AzureFilm, Technical Data Sheet 04.24 ASA Primep. 1
Precision and toleranceWith ASA Prime you will create precise, detailed printsAzureFilm, Technical Data Sheet 04.24 ASA Primep. 1
Adhesion between layersDue to our enhanced formulation, ASA Prime has exceptional strength with a high impact resistance and excellent interlayer adhesion.AzureFilm, Technical Data Sheet 04.24 ASA Primep. 1

Nanovia ASAStrength XY, MPa47Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C79Price, CAD/kg—Nozzle, °C250–270Bed, °C100–110Chamber, °C90Drying, °C, h604 h

Nanovia ASANanovia

Published values

Property	As published	Conditions	On the Overview
Nanovia, Nanovia ASA : Weather resistant : Nanovia7 valuesUnless a row says otherwise: specimen not stated
Tensile yield strength orientation not stated	47 MPap. 1: Tensile strength at yield	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	20 %p. 1: Tensile elongation at break	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2100 MPap. 1: Flexural modulus	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	65 MPap. 1: Flexural Strength at break	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	79 °Cp. 1: DTUL at 1.8 MPa	ISO 75 As the sheet prints it: ISO 75/A; 1.8 MPa	in the median
Glass transition temperature	100 °Cp. 1: Tg	no standard stated	in the median
Density	1.07 g/cm3p. 1: Density	no standard stated

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: 90 °Cown data sheet
Drying: optional: 60 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 250 – 270 °C; Bed 100 – 110 °C; Chamber 90 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia ASA : Weather resistant : Nanoviap. 1: Recommended printing settings; p. 1: Drying note

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

Good forIdeal for 3D prints that are used outside, for example on terrases and boats.Nanovia, Nanovia ASA : Weather resistant : Nanoviap. 1
BenefitsEasy to printNanovia, Nanovia ASA : Weather resistant : Nanoviap. 1
Surface finishIt’s possible to smoothen Nanovia ASA using acetone.Nanovia, Nanovia ASA : Weather resistant : Nanoviap. 1
Odour and emissionsWhilst printing ASA produces a VOC derivative.Nanovia, Nanovia ASA : Weather resistant : Nanoviap. 1

Chemicals and environment (2)

UV and outdoor: described in wordsASA as similar mechanical and thermal properties of ABS, but unlike the latter ASA does not degrade in the presence of the sun’s UV radiation.UVNanovia, Nanovia ASA : Weather resistant : Nanoviap. 1
UV and outdoor: described in wordsASA (Acrylonitrile styrene acrylate) is a plastic with mechanical properties similar to ABS but hydrophobic and UV resistant.UVNanovia, Nanovia ASA : Weather resistant : Nanoviap. 1

Fillamentum ASA ExtrafillStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa1.73Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C86Price, CAD/kg—Nozzle, °C240–255Bed, °C90–105Chamber, °CenclosedDrying, °C, h808 h

Fillamentum ASA ExtrafillFillamentum

Published values

Property	As published	Conditions	On the Overview
Fillamentum, ASA Extrafill11 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1726 MPap. 1: Tensile modulus	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	40 MPap. 1: Tensile strength	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	35 %p. 1: Elongation at break	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	1814 MPap. 1: Flexural modulus	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	62 MPap. 1: Flexural strength	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	441 J/mp. 1: Izod impact strength	ASTM D256notched	not in the median: in J/m
Hardness	92 Rockwell Rp. 1: Rockwell hardness	ASTM D785	listed under other properties
HDT at 1.8 MPa	86 °Cp. 1: Heat distortion temperature	ASTM D648 As the sheet prints it: 1,8 MPa ASTM D648	in the median
Vicat softening temperature	94 °Cp. 1: Vicat softening temperature	ASTM D1525
Density	1,07 g/cm3p. 1: Material density	ASTM D792
Melt mass-flow rate	5 g/10 minp. 1: Melt flow index	no standard stated

Print settings

Nozzle: 240–255 °Cown data sheet
Bed: 90–105 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240–255 °C; Bed 90–105 °CFillamentum, ASA Extrafillp. 1: Recommended printing settings; p. 1: Bed adhesive

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

Good forThanks to mechanical properties is ASA filament ideal for the production of the first samples before serial production for functional prototyping, manufacturing tools, but also for the production of goods for everyday usage including outdoor applications.Fillamentum, ASA Extrafillp. 1
BenefitsThe advantage of this material is its excellent weather resistance, high retention of physical features and low level of yellowing.Fillamentum, ASA Extrafillp. 1
BenefitsASA has a higher rigidity than ABS and thus it is suitable for demanding applications.Fillamentum, ASA Extrafillp. 1
Warping and shrinkageAnother advantage is its good dimensional stability.Fillamentum, ASA Extrafillp. 1

Fiberlogy MATTE ASAStrength XY, MPa43Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²8IzodHDT 0.45, °C96HDT 1.8, °C87Price, CAD/kg—Nozzle, °C255–270Bed, °C90–110Chamber, °CenclosedDrying, °C, h804 h

Fiberlogy MATTE ASAFiberlogy

Published values

Property	As published	Conditions	On the Overview
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy MATTE ASA8 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	2300 MPap. 1: Tensile Modulus ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	43 MPap. 1: Tensile Strength @ Yield ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	19 %p. 1: Elongation @ Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	3 %p. 1: Elongation @ Yield ISO 527 %	specimen not stated, ISO 527	listed under other properties
Izod impact strength	8 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23°C ISO 180 kJ/m2	ISO 180 As the sheet prints it: 23°C ISO 180 tested at 23°C	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 0.45 MPa	96 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ASTM D648 °C	ASTM D648 As the sheet prints it: 0.45 MPa ASTM D648	not in the median: set apart (never used to pass), test bar not described as printed
HDT at 1.8 MPa	87 °Cp. 1: Heat Distortion Temperature @ 1.8 MPa ASTM D648 °C	ASTM D648 As the sheet prints it: 1.8 MPa ASTM D648	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	96 °Cp. 1: Vicat Softening Temperature ASTM D1525 °C	specimen not stated, ASTM D1525
Fiberlogy, ASA Matte Filament2 valuesUnless a row says otherwise: specimen not stated
Izod impact strength orientation not stated	8 kJ/m²p. 1: Izod impact strength (notched) @ 23°C	ISO 180tested at 23°C	not in the median: another value of this product is in it
Density	1.07 g/cm³p. 1: Density	no standard stated

Print settings

Nozzle: 255–270 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: 80 °C for 4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, ASA Matte Filament.

Its 2 print profiles, in the documents' words

Nozzle 255°C - 270°C; Bed 90°C - 110°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy MATTE ASAp. 1: Recommended printing settings
Nozzle 255–270°C; Bed 110°C; Drying 80°C / 4 hoursFiberlogy, ASA Matte Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber

Price

Not in the price sample.

Its 3 documents

What the maker says (1)

Warping and shrinkageLow shrinkage and good layer adhesion ensure stable and precise printsFiberlogy, ASA Matte Filamentp. 1

SIDDAMENT ASAStrength XY, MPa52Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²18IzodHDT 0.45, °C96HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C80–100Chamber, °CenclosedDrying, °C, h802–4 h

SIDDAMENT ASASIDDAMENT

Published values

Property	As published	Conditions	On the Overview
SIDDAMENT, ASA Filament - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated
Tensile strength (yield or break not stated) orientation not stated	52 MPap. 1: Tensile Strength ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	20 %p. 1: Elongation at Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2144 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	73 MPap. 1: Bending Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	18 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2	ISO 180	not in the median: set apart (never used to pass), test bar not described as printed
HDT	96 °Cp. 1: Heat Deflection ISO 75 °C	ISO 75	not in the median: set apart (never used to pass), no stated test load
Density	1.1 g/cm3p. 1: Density ISO 1183 g/cm3	ISO 1183
Water absorption	0.4 %p. 1: Water Absorption ISO 62 %	ISO 62

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 2–4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 250-270°C; Bed 80-100°C; Drying If damp, dry at 80°C for 2-4 hours.SIDDAMENT, ASA Filament - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Supports and removalSupporting Material: Self-supporting, PVASIDDAMENT, ASA Filament - Technical Datasheetp. 2

Filament2Print ASAStrength XY, MPa34.4Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C68Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h706 h

Filament2Print ASAFilament2Print

Published values

Property	As published	Conditions	On the Overview
Filament2Print, ASA Technical Data Sheet10 values
Tensile modulus orientation not stated	324.911 MPa (TDS prints "324,911" with European decimal separator)physically implausiblep. 1: Elastic Modulus	ISO 527, GB/T 9341	not in the median: physically implausible as published
Tensile yield strength orientation not stated	34.435 MPA (TDS prints "34,435" with European decimal separator)p. 1: Yield Strength	ISO 527, GB/T 1040	in the median
Elongation at break orientation not stated	14.598 % (TDS prints "14,598" with European decimal separator)p. 1: Elongation at Break	ISO 527, GB/T 1040	in the median
Flexural modulus orientation not stated	1836,740 MPap. 1: Flexural Modulus	ISO 178, GB/T 9341	in the median
Flexural strength orientation not stated	55.411 MPa (TDS prints "55,411" with European decimal separator)p. 1: Flexural Strength	ISO 178, GB/T 9341	in the median
Charpy impact strength	11.273 kJ/m² (TDS prints "11,273" with European decimal separator)p. 1: Impact Strength	ISO 179, GB/T 1043	not in the median: notch not stated
HDT at 1.8 MPa	68 °Cp. 1: Vicat Softening Temperature	ISO 75 As the sheet prints it: ISO 75; 1.8 MPa	in the median
Density	1,07 g/cm³p. 1: Density	ISO 1183, GB/T 1033
Water absorption	0.13 %p. 1: Moisture absorption limit	ISO 62
Melt mass-flow rate	23,58 g/10 minp. 1: Melt Flow Index (MFR)	ISO 1133, GB/T 3682

Print settings

Nozzle: 240–280 °Cown data sheet
Bed: 90–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 70 °C for 6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 °C - 280 °C; Bed 90 ºC - 100 ºC; Drying 70°C for 6 hoursFilament2Print, ASA Technical Data Sheetp. 1: Recommended printing settings; p. 1: Bed Temperature; p. 1: Compatible Print Beds

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Warping and shrinkageIts optimized formulation reduces the risk of warping, cracking, or deformation, allowing makers, designers, and professionals to achieve consistent results.Filament2Print, ASA Technical Data Sheetp. 1

AzureFilm ASAStrength XY, MPa41.1Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²—HDT 0.45, °C86HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–260Bed, °C90–120Chamber, °CnoneDrying, °C, h808 h

AzureFilm ASAAzureFilm

Published values

Property	As published	Conditions	On the Overview
AzureFilm, Technical Data Sheet ASA (AzureFilm, 05.24)20 valuesUnless a row says otherwise: printed specimen print settings infill=100%; shells=2; layer height=0.2mm
Tensile modulus XY	2000 MPap. 1: Tensile Modulus (XY)	ISO 527 As the sheet prints it: ISO 527-2	in the median
Tensile modulus XZ	2000 MPap. 1: Tensile Modulus (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile modulus ZX	1600 MPap. 1: Tensile Modulus (ZX)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) XY	41.1 MPap. 1: Tensile Strength (XY)	ISO 527 As the sheet prints it: ISO 527-2	in the median
Tensile strength (yield or break not stated) XZ	42.8 MPap. 1: Tensile Strength (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile strength (yield or break not stated) ZX	18.5 MPap. 1: Tensile Strength (ZX)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Tensile yield strength XY	31.7 MPap. 1: Yield Strength (XY)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: another value of this product is in it
Tensile yield strength XZ	31.9 MPap. 1: Yield Strength (XZ)	ISO 527 As the sheet prints it: ISO 527-2	not in the median: measured on a bar in another orientation
Elongation at yield XY	5.8 %p. 1: Strain at Yield (XY)	ISO 527 As the sheet prints it: ISO 527-2	listed under other properties
Elongation at yield XZ	3.9 %p. 1: Strain at Yield (XZ)	ISO 527 As the sheet prints it: ISO 527-2	listed under other properties
Elongation at yield ZX	1.3 %p. 1: Strain at Yield (ZX)	ISO 527 As the sheet prints it: ISO 527-2	listed under other properties
Flexural modulus XY	2000 MPap. 1: Flexural Modulus (XY)	ISO 178	in the median
Flexural modulus XZ	2100 MPap. 1: Flexural Modulus (XZ)	ISO 178	not in the median: measured on a bar in another orientation
Flexural modulus ZX	1600 MPap. 1: Flexural Modulus (ZX)	ISO 178	not in the median: measured on a bar in another orientation
Flexural strength XY	64.8 MPap. 1: Flexural Strength (XY)	ISO 178	in the median
Flexural strength XZ	68.1 MPap. 1: Flexural Strength (XZ)	ISO 178	not in the median: measured on a bar in another orientation
Flexural strength ZX	28.2 MPap. 1: Flexural Strength (ZX)	ISO 178	not in the median: measured on a bar in another orientation
HDT	86 °Cp. 1: Heat deflect. temp.	specimen not stated; its document points to a moulded or resin bar, ISO 75print settings not stated	not in the median: set apart (never used to pass), test bar not described as printed
Melting temperature	200-250 °Cp. 1: Melting temp.	specimen not stated, ISO 294print settings not stated
Density	1.07 g/ccp. 1: Specific gravity	specimen not stated, ISO 1133print settings not stated

AzureFilm, Technical Data Sheet ASA TDS6 valuesUnless a row says otherwise: Printed specimen at partial infill print settings Nozzle temperature: 250 °C; 3D printer: Creator 3; Infill: 20 %; Bed temperature: 110 °C; Slicer: FlashPrint; Shells: 2; Print speed: 50 mm/s; Nozzle diameter: 0,4 mm; Layer height: 0,3 mm
Tensile modulus orientation not stated	21,200 kg/cm2p. 1: Tensile Modulus, 3.2mm 1mm/min ASTM D638 kg/cm2	ASTM D638 As the sheet prints it: 3.2mm 1mm/min ASTM D638	not in the median: printed below 100 % infill
Tensile strength (yield or break not stated) orientation not stated	480 kg/cm2p. 1: Tensile strength 3.2mm 50 mm/min ASTM D638 kg/cm2	ASTM D638 As the sheet prints it: 3.2mm 50 mm/min ASTM D638	not in the median: printed below 100 % infill
Elongation at break orientation not stated	25 %p. 1: Tensile Elongation 3.2mm @ Break	ASTM D638 As the sheet prints it: ASTM D638; rate=50 mm/min; thickness=3.2mm	not in the median: printed below 100 % infill
Elongation at yield orientation not stated	>6 %p. 1: Tensile Elongation 3.2mm @ Yield	ASTM D638 As the sheet prints it: ASTM D638; rate=50 mm/min; thickness=3.2mm	listed under other properties
Flexural modulus orientation not stated	22,500 kg/cm2p. 1: Flexural Modulus, 3.2mm 15mm/min ASTM D790 kg/cm2	ASTM D790 As the sheet prints it: 3.2mm 15mm/min ASTM D790	not in the median: printed below 100 % infill
Flexural strength orientation not stated	770 kg/cm2p. 1: Flexural Strength, 3.2mm 15mm/min ASTM D790 kg/cm2	ASTM D790 As the sheet prints it: 3.2mm 15mm/min ASTM D790	not in the median: printed below 100 % infill

Print settings

Nozzle: 240–260 °Cown data sheet
Bed: 90–120 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its 3 print profiles, in the documents' words

Nozzle 240 – 260 °C; Bed Recommended 90 – 120 °C)AzureFilm, Technical Data Sheet ASA TDSp. 1: Recommended printing settings: Nozzle temperature, Heated bed; p. 1: Printing Recommendations
Nozzle 240-260; Bed 90-120AzureFilm, Technical Data Sheet ASA (AzureFilm, 05.24)p. 1: Printing temp.; p. 1: Bed temp.; Bed surface
No temperature statedAzureFilm, ASA filament Blue (AzureFilm)ASA filaments (enclosure)

Price

Not in the price sample.

Its 4 documents

What the maker says (2)

Good forAdded UV resistance makes it perfect for external outdoor use.AzureFilm, Technical Data Sheet ASA TDSp. 1
Good forMost often it is used for the production of prototypes & engineering solutions that withstand higher temperatures or even exposure in the cold, rain or sea water.AzureFilm, Technical Data Sheet ASA TDSp. 1

3D4Makers ASAStrength XY, MPa47.1Strength Z, MPa—Modulus XY, GPa2.08Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C90–110Chamber, °CenclosedDrying, °C, h808 h

3D4Makers ASA3D4Makers

Published values

Property	As published	Conditions	On the Overview
3D4Makers, Technical data sheet 3D printing filament ASA Filament10 values
Tensile modulus orientation not stated	2080 MPap. 1: Tensile modulus 3.20 mm ASTM D638	ASTM D638 As the sheet prints it: 3.20 mm ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	47.1 MPap. 1: Tensile Strength Yield, 3.20 mm ASTM D638	ASTM D638 As the sheet prints it: 3.20 mm ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	25%p. 1: Tensile Elongation	ASTM D638 As the sheet prints it: ASTM D638; break; thickness=3.20 mm	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	6.0 %p. 1: Tensile Elongation Yield, 3.20 mm ASTM D638	ASTM D638 As the sheet prints it: 3.20 mm ASTM D638	listed under other properties
Flexural modulus orientation not stated	2210 MPap. 1: Flexural Modulus 3.20 mm ASTM D790	ASTM D790 As the sheet prints it: 3.20 mm ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	75.5 MPap. 1: Flexural Strength 3.20 mm ASTM D790	ASTM D790 As the sheet prints it: 3.20 mm ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Hardness	103 Rockwell Rp. 1: Rockwell Hardness (R-Scale) ASTM D785	ASTM D785	listed under other properties
Vicat softening temperature	95.0 °Cp. 1: Vicat Softening Temperature ASTM D1525	ASTM D1525
Density	1.05 g/cm3p. 1: Density ASTM D792	ASTM D792
Mould shrinkage orientation not stated	0.40-0.70 %transcription correctedp. 1: Molding Shrinkage-Flow 3.20 mm ASTM D955 0.40 to	ASTM D955 As the sheet prints it: 3.20 mm ASTM D955

Print settings

Nozzle: 240–280 °Cown data sheet
Bed: 90–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 240 - 280 °C; Bed 90 - 110 °C3D4Makers, Technical data sheet 3D printing filament ASA Filamentp. 2: Recommended printing settings; p. 2: Bed Adhesion

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

Good forTypical ASA applications are buiding/construction, automotive and recreation parts.3D4Makers, Technical data sheet 3D printing filament ASA Filamentp. 1
BenefitsHowever, the ASA properties are far less affected by outdoor weathering.3D4Makers, Technical data sheet 3D printing filament ASA Filamentp. 1

iSANMATE ASAStrength XY, MPa43.2Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²21.2HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

iSANMATE ASAiSANMATE

Published values

Property	As published	Conditions	On the Overview
iSANMATE, ASA Filament Technical Data Sheet9 values
Tensile strength (yield or break not stated) orientation not stated	43.23 MPap. 1: Tensile Stress MPa	ISO 527, GB/T 1040	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	4.71 %p. 1: Tensile Strain (Break) % ISO 527, GB/T 1040	ISO 527, GB/T 1040	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2024.85 MPap. 1: Flexural Modulus	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	71.39 MPap. 1: Bending Stress	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Charpy impact strength	21.196 KJ/m2p. 1: Notched Impact Strength	ISO 179, GB/T 1043	not in the median: set apart (never used to pass), test bar not described as printed
Melting temperature	200-230 ℃p. 1: Melting Point	DSC
Density	1.054 g/cm3p. 1: Density	GB/T 1033.1 As the sheet prints it: GB/T 1033.1-2008
Melt mass-flow rate	16-26 g/10minp. 1: Melt Index	ISO 1183 As the sheet prints it: 220℃ 10kg) ISO 1183 tested at 220°C
Mould shrinkage orientation not stated	0.40-0.70 %p. 1: Shrinkage	ISO 294 As the sheet prints it: ISO294-4

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

iSANMATE, ASA Filament Technical Data Sheet

What the maker says (2)

Good forTypical Application: Outdoor molded case products, auto parts, etc.iSANMATE, ASA Filament Technical Data Sheetp. 1
BenefitsIn addition to good mechanical and physical properties, ASA XC187 also has the following characteristics: 1.Good weather resistance High rigidity 2.Good heat resistance 3.Good toughnessiSANMATE, ASA Filament Technical Data Sheetp. 1

Spectrum THE FILAMENT ASAStrength XY, MPa46Strength Z, MPa—Modulus XY, GPa1.87Charpy notched, kJ/m²—HDT 0.45, °C86HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–265Bed, °C75–100Chamber, °CenclosedDrying, °C, h808 h

Spectrum THE FILAMENT ASASpectrum

Data sheet shared with The Filament ASA: their values are one table, recorded once.

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA8 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	1870 MPap. 1: Tensile Modulus	ASTM D638 As the sheet prints it: D 638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	46 MPap. 1: Tensile Strength at Yield	ASTM D638 As the sheet prints it: D 638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	34%p. 1: Tensile Elongation	ASTM D638 As the sheet prints it: D 638	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	63 MPap. 1: Flexural Strength	ASTM D790 As the sheet prints it: D 790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	450 J/mp. 1: Izod Impact Strength, Notched, 3.2mm,	ASTM D256 As the sheet prints it: D 256; thickness=3.2mm	not in the median: in J/m
HDT	86 °Cp. 1: Heat Deflection Temperature	ASTM D648 As the sheet prints it: D 648	not in the median: set apart (never used to pass), no stated test load
Vicat softening temperature	92 °Cp. 1: VICAT	ASTM D1525 As the sheet prints it: D 1525
Density	1.07 g/cm3p. 1: Specific Gravity	ASTM D792 As the sheet prints it: D 792
Spectrum, TECHNICAL DATA SHEET THE FILAMENT ASA1 value
Vicat softening temperature	93°Cp. 1: Features: VICAT - 93°C	no standard stated

Print settings

Nozzle: 230–265 °Cown data sheet
Bed: 75–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededown data sheet

Its print profile, in the documents' words

Nozzle 230-265°C; Bed 75-100°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: Adhesive; p. 1: settings footnote

Price

Not in the price sample.

Its 3 documents

What the maker says (5)

Benefitsresistance to external exposure, changing weather conditions & UV resistance, VICAT - 93°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1
Surface finishSurface finish shinySpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1
Moisture sensitivityDry box recommended: NoSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1
Nozzle wearRuby or hardened nozzle recommended: NoSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1
Printing adviceClosed chamber for printing recommended for larger printsSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1

The Filament ASAStrength XY, MPa46Strength Z, MPa—Modulus XY, GPa1.87Charpy notched, kJ/m²—HDT 0.45, °C86HDT 1.8, °C—Price, CAD/kg—Nozzle, °C230–265Bed, °C75–100Chamber, °CenclosedDrying, °C, h808 h

The Filament ASAThe Filament

Data sheet shared with Spectrum THE FILAMENT ASA: their values are one table, recorded once.

Published values

No value is on file for this product.

Print settings

Nozzle: 230–265 °Cown data sheet
Bed: 75–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededown data sheet

Its print profile, in the documents' words

Nozzle 230-265°C; Bed 75-100°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1: Nozzle temperature, Bed temperature, Closed chamber for printing, Ruby or hardened nozzle; p. 1: Dry box recommended; p. 1: * settings are based on a 0,4 mm nozzle.

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

Surface finishSurface finish shinySpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1
Moisture sensitivityDry box recommended: NoSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1
Nozzle wearRuby or hardened nozzle recommended: NoSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1
Printing adviceClosed chamber for printing recommended for larger printsSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1

Chemicals and environment (1)

UV and outdoor: described in wordsresistance to external exposure, changing weather conditions & UV resistanceUVSpectrum, TECHNICAL DATA SHEET THE FILAMENT ASAp. 1

Stratasys ASAStrength XY, MPa—Strength Z, MPa25.8Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C103HDT 1.8, °C98Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

Stratasys ASAStratasys

Published values

Property	As published	Conditions	On the Overview
Stratasys, MATERIAL DATA SHEET ASA75 valuesUnless a row says otherwise: printed specimen print settings 0.25 mm (0.010 in.) and 0.33 (0.013 in.) layer heights on the F900, F3300, and F770
Tensile modulus Z (ZX)	2.05 (0.20) GPap. 10: Modulus (Elastic) GPa (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16	in the median
Tensile modulus Z (ZX)	1.77 (0.038) GPap. 11: Modulus (Elastic) GPa (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: another value of this product is in it
Tensile modulus Z (ZX)	1.62 (0.0186) GPap. 12: Modulus (Elastic) GPa (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: another value of this product is in it
Tensile modulus Z (ZX)	1.55 (0.06) GPap. 13: Modulus (Elastic) GPa (ZX)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	not in the median: another value of this product is in it
Tensile modulus XZ	2.14 (0.072) GPap. 10: Modulus (Elastic) GPa (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Tensile modulus XZ	1.94 (0.032) GPap. 11: Modulus (Elastic) GPa (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: measured on a bar in another orientation
Tensile modulus XZ	1.85 (0.0195) GPap. 12: Modulus (Elastic) GPa (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: measured on a bar in another orientation
Tensile modulus XZ	1.71 (0.096) GPap. 13: Modulus (Elastic) GPa (XZ)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	not in the median: measured on a bar in another orientation
Tensile yield strength Z (ZX)	25.8 (2.7) MPap. 11: Yield Strength MPa (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	in the median
Tensile yield strength Z (ZX)	26.9 (1.4) MPap. 12: Yield Strength MPa (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: another value of this product is in it
Tensile yield strength Z (ZX)	27.7 (0.79) MPap. 13: Yield Strength MPa (ZX)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	not in the median: another value of this product is in it
Tensile yield strength XZ	32.8 (1.0) MPap. 10: Yield Strength MPa (XZ) (ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	37.2 (0.72) MPap. 11: Yield Strength MPa (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	35.2 (0.37) MPap. 12: Yield Strength MPa (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: measured on a bar in another orientation
Tensile yield strength XZ	32 (1.5) MPap. 13: Yield Strength MPa (XZ)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	not in the median: measured on a bar in another orientation
Tensile break strength Z (ZX)	28.3 (2.1) MPap. 10: Strength @ Break MPa (ZX) (ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	25.6 (2.6) MPap. 11: Strength @ Break MPa (ZX) (ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	27.0 (1.3) MPap. 12: Strength @ Break MPa (ZX) (ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: another value of this product is in it
Tensile break strength Z (ZX)	27.8 (0.86) MPap. 13: Strength @ Break MPa (ZX) (Modified ASTM D638)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	not in the median: another value of this product is in it
Tensile break strength XZ	31.9 (0.98) MPap. 10: Strength @ Break MPa (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Tensile break strength XZ	34.9 (1.1) MPap. 11: Strength @ Break MPa (XZ) (ASTM D638)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: measured on a bar in another orientation
Tensile break strength XZ	33.7 (0.81) MPap. 12: Strength @ Break MPa (XZ)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: measured on a bar in another orientation
Tensile break strength XZ	30.6 (1.6) MPap. 13: Strength @ Break MPa (XZ) (Modified ASTM D638)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	not in the median: measured on a bar in another orientation
Elongation at break Z (ZX)	1.8 (0.31) %p. 10: Elongation @ Break % (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F900; tip=T16	in the median
Elongation at break Z (ZX)	1.8 (0.24) %p. 11: Elongation @ Break % (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: another value of this product is in it
Elongation at break Z (ZX)	2.3 (0.4) %p. 12: Elongation @ Break % (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: another value of this product is in it
Elongation at break Z (ZX)	2.7 (0.23) %p. 13: Elongation @ Break % (ZX)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	not in the median: another value of this product is in it
Elongation at break XZ	5.9 %p. 10: Elongation @ Break %	ASTM D638	not in the median: measured on a bar in another orientation
Elongation at break XZ	10 %p. 11: Elongation @ Break %	ASTM D638	not in the median: measured on a bar in another orientation
Elongation at break XZ	8.4 %p. 12: Elongation @ Break %	ASTM D638	not in the median: measured on a bar in another orientation
Elongation at break XZ	12 %p. 13: Elongation @ Break %	ASTM D638 As the sheet prints it: Modified ASTM D638	not in the median: measured on a bar in another orientation
Elongation at yield Z (ZX)	1.8 (0.24) %p. 11: Elongation @ Yield % (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F3300; hot end=N500	listed under other properties
Elongation at yield Z (ZX)	2.3 (0.4) %p. 12: Elongation @ Yield % (ZX)	ASTM D638 As the sheet prints it: ASTM D638; layer height=0.25 mm; printer=F770; head=T14 Standard	listed under other properties
Elongation at yield Z (ZX)	2.6 (0.13) %p. 13: Elongation @ Yield % (ZX)	ASTM D638 As the sheet prints it: Modified ASTM D638; layer height=0.33 mm; printer=F770; head=T25	listed under other properties
Elongation at yield XZ	2.5 %p. 10: Elongation @ Yield %	ASTM D638	listed under other properties
Elongation at yield XZ	2.9 %p. 11: Elongation @ Yield %	ASTM D638	listed under other properties
Elongation at yield XZ	3.0 %p. 12: Elongation @ Yield %	ASTM D638	listed under other properties
Elongation at yield XZ	2.7 %p. 13: Elongation @ Yield %	ASTM D638 As the sheet prints it: Modified ASTM D638	listed under other properties
Flexural modulus XZ	1.98 (0.045) GPap. 10: Modulus GPa (XZ)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Flexural modulus ZX	1.76 (0.033) GPap. 10: Modulus GPa (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Flexural modulus XZ	2.11 (0.051) GPap. 11: Modulus GPa (XZ)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: measured on a bar in another orientation
Flexural modulus ZX	1.65 (0.1) GPap. 11: Modulus GPa (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: measured on a bar in another orientation
Flexural modulus XZ	1.90 (0.099) GPap. 12: Modulus GPa (XZ)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: measured on a bar in another orientation
Flexural modulus ZX	1.72 (0.046) GPap. 12: Modulus GPa (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: measured on a bar in another orientation
Flexural modulus XZ	1.79 (0.083) GPap. 13: Modulus GPa (XZ)	ASTM D790 As the sheet prints it: Modified ASTM D790, Procedure A; layer height=0.33 mm; printer=F770; head=T25	not in the median: measured on a bar in another orientation
Flexural modulus ZX	1.58 (0.063) GPap. 13: Modulus GPa (ZX)	ASTM D790 As the sheet prints it: Modified ASTM D790, Procedure A; layer height=0.33 mm; printer=F770; head=T25	not in the median: measured on a bar in another orientation
Flexural strength ZX	51.0 (1.4) MPap. 10: Strength @ Break MPa (ZX) (ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F900; tip=T16	not in the median: measured on a bar in another orientation
Flexural strength XZ	70.6 (2.6) MPap. 11: Strength @ Break MPa (XZ) (ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: measured on a bar in another orientation
Flexural strength ZX	45 (5.3) MPap. 11: Strength @ Break MPa (ZX) (ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F3300; hot end=N500	not in the median: measured on a bar in another orientation
Flexural strength ZX	48.2 (4.8) MPap. 12: Strength @ Break MPa (ZX) (ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F770; head=T14 Standard	not in the median: measured on a bar in another orientation
Flexural strength XZ	58.1 (2.7) MPap. 13: Strength @ Break MPa (XZ) (Modified ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: Modified ASTM D790, Procedure A; layer height=0.33 mm; printer=F770; head=T25	not in the median: measured on a bar in another orientation
Flexural strength ZX	47.2 (1.9) MPap. 13: Strength @ Break MPa (ZX) (Modified ASTM D790, Procedure A)	ASTM D790 As the sheet prints it: Modified ASTM D790, Procedure A; layer height=0.33 mm; printer=F770; head=T25	not in the median: measured on a bar in another orientation
Flexural elongation at break ZX	3.93 (0.25) %p. 10: Strain @ Break % (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F900; tip=T16	listed under other properties
Flexural elongation at break XZ	3.8 (1) %p. 11: Strain @ Break % (XZ)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F3300; hot end=N500	listed under other properties
Flexural elongation at break ZX	3.1 (0.36) %p. 11: Strain @ Break % (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F3300; hot end=N500	listed under other properties
Flexural elongation at break ZX	3.7 (0.7) %p. 12: Strain @ Break % (ZX)	ASTM D790 As the sheet prints it: ASTM D790, Procedure A; layer height=0.25 mm; printer=F770; head=T14 Standard	listed under other properties
Flexural elongation at break ZX	4.1 (0.31) %p. 13: Strain @ Break % (ZX)	ASTM D790 As the sheet prints it: Modified ASTM D790, Procedure A; layer height=0.33 mm; printer=F770; head=T25	listed under other properties
Izod impact strength XZ	43.1 (3.8) J/mp. 10: Notched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; layer_height=0.25 mm; colour=Black print settings not stated	not in the median: in J/m
Izod impact strength ZX	23.8 (3.8) J/mp. 10: Notched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; layer_height=0.25 mm; colour=Black print settings not stated	not in the median: in J/m
Izod impact strength XZ	285 (61) J/mp. 10: Unnotched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; layer_height=0.25 mm; colour=Black print settings not stated	not in the median: in J/m
Izod impact strength ZX	91.1 (18) J/mp. 10: Unnotched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F900; tip=T16; layer_height=0.25 mm; colour=Black print settings not stated	not in the median: in J/m
Izod impact strength XZ	54.4 (3.3) J/mp. 11: Notched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Izod impact strength ZX	29.3 (29) J/mp. 11: Notched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Izod impact strength XZ	1,000 (130) J/mp. 11: Unnotched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Izod impact strength ZX	71.4 (14) J/mp. 11: Unnotched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F3300; hot_end=N500; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Izod impact strength XZ	60.9 (4.8) J/mp. 12: Notched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F770; head=T14 Standard Head; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Izod impact strength ZX	28.5 (5.7) J/mp. 12: Notched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F770; head=T14 Standard Head; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Izod impact strength XZ	732 (140) J/mp. 12: Unnotched (XZ)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F770; head=T14 Standard Head; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Izod impact strength ZX	110 (22) J/mp. 12: Unnotched (ZX)	ASTM D256, ASTM D4812 As the sheet prints it: ASTM D256, ASTM D4812; printer=F770; head=T14 Standard Head; layer_height=0.25 mm; colour=Natural print settings not stated	not in the median: in J/m
Compression strength XZ	75.4 (3.8) MPap. 10: Yield Strength MPa (XZ) (ASTM D695)	ASTM D695 As the sheet prints it: ASTM D695; layer height=0.25 mm; printer=F900; tip=T16 print settings not stated
Compression strength ZX	188 (28) MPap. 10: Yield Strength MPa (ZX)	ASTM D695 As the sheet prints it: ASTM D695; layer height=0.25 mm; printer=F900; tip=T16 print settings not stated
Compression strength XZ	93.2 (9.1) MPap. 11: Peak Strength MPa (XZ)	no standard named As the sheet prints it: ASTM 695; layer height=0.25 mm; printer=F3300; hot end=N500 print settings not stated
Compression strength ZX	123 (22) MPap. 11: Peak Strength MPa (ZX)	no standard named As the sheet prints it: ASTM 695; layer height=0.25 mm; printer=F3300; hot end=N500 print settings not stated
HDT XY, at 0.45 MPa	103 °Cp. 8: HDT at 66 psi	ASTM D648 As the sheet prints it: 66 psi ASTM D648	in the median
HDT XY, at 1.8 MPa	98.2 °Cp. 8: HDT at 264 psi	ASTM D648 As the sheet prints it: 264 psi ASTM D648	in the median

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededown data sheet

Its print profile, in the documents' words

No temperature statedStratasys, MATERIAL DATA SHEET ASAp. 3: Build Sheet; p. 4: Fortus 450mc system requirement

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Good forASA is suitable for most general-purpose 3D printing applications involving prototyping, jigs and fixtures and low-volume production parts.Stratasys, MATERIAL DATA SHEET ASAp. 2

Chemicals and environment (4)

UV and outdoor: described in wordsIt is similar to ABS (acrylonitrile butadiene styrene) but exhibits better UV resistance, mechanical properties and aesthetics than ABS.UVStratasys, MATERIAL DATA SHEET ASAp. 2
UV and outdoor: described in wordsNatural color ASA coupons were built on the F900 using the T16 tip with 0.254 mm (0.010 in.) layer height. The coupons were then tested before and after UV exposure. Ten ASTM D638 upright (ZX) coupons were tested in tensile after UV exposure and an additional 10 ASTM D638 ZX coupons were the control (no UV Exposure). The UV exposed samples were cycled in the QUV chamber per ASTM G154 (Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Non-Metallic Materials) for 1000 hours, alternating for 8 hours at 60 °C (140 °F) and 4 hours at 50 °C (122 °F) with humidity and condensation. The increase in stress in break is from the control samples. For more information see the Impact of UV Exposure on FDM Materials white paper.UVStratasys, MATERIAL DATA SHEET ASAp. 14: UV Aging, full test-conditions paragraph
UV and outdoor: described in wordsNo UV Exposure 4,430 30.5 4,420 30.5 2.8 - 264 1.82UVStratasys, MATERIAL DATA SHEET ASAp. 14: Table 8, ASA (Natural), No UV Exposure row
UV and outdoor: described in wordsUV Exposure 4,390 30.3 4,290 29.5 2.3 -3.00 283 1.95UVStratasys, MATERIAL DATA SHEET ASAp. 14: Table 8, ASA (Natural), UV Exposure row

Fabru Acrylnitril-Styrol-Acrylester (ASA)Strength XY, MPa45Strength Z, MPa—Modulus XY, GPa2.16Charpy notched, kJ/m²—HDT 0.45, °C92HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C80–100Chamber, °CenclosedDrying, °C, h802–4 h

Fabru Acrylnitril-Styrol-Acrylester (ASA)Fabru

Published values

Property	As published	Conditions	On the Overview
Fabru, Acrylnitril-Styrol-Acrylester (ASA)9 values
Tensile modulus orientation not stated	2160 MPap. 1: Tensile modulus (ASTM D790)	ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	45 MPap. 1: Yield stress (ASTM D638)	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	35 %p. 1: Elongation at break (ASTM D638)	ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at yield orientation not stated	30 %physically implausiblep. 1: Elongation at yield (ASTM D638)	ASTM D638	listed under other properties
HDT at 0.45 MPa	92 °Cp. 1: Heat deflection temperature	ASTM D648 As the sheet prints it: 0.45 MPa (ASTM D648)	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	105 °Cp. 1: Vicat softening temperature A	no standard stated
Density	1.07 g/cm3p. 1: Density (ASTM D792)	ASTM D792
Melt mass-flow rate	16 g/10minp. 1: MFR (ASTM D1238)	ASTM D1238
Mould shrinkage orientation not stated	0.4-0.7 %p. 1: Shrinkage (ASTM D955)	ASTM D955

Print settings

Nozzle: 210–260 °Cown data sheet
Bed: 80–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 80 °C for 2–4 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its 3 print profiles, in the documents' words

Nozzle 210-260 ° C; Bed 80-100 ° CFabru, purefil ASA grün 1kg 1.75mmp. 1: Nozzle temperature; p. 1: Printing table temperature
Nozzle 210-260 °C; Bed 80-100 °C; Drying 80 °C | 2-4 hFabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Nozzle 210-260 °C; Bed 80-100 °C; Drying 80 °C | 2-4 hFabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1: Drucktemperatur; p. 1: Heizbett Temperatur; p. 1: Trocknungstemperatur / Trocknungsdauer

Price

Not in the price sample.

Its 4 documents

What the maker says (18)

Good forIf you are planning projects that require a plastic that can withstand UV rays and weather, acrylonitrile-styrene-acrylic ester is your first choice.Fabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
BenefitsASA is a styrene-based plastic that has similar properties to ABS (acrylonitrile butadiene styrene), but has much better weather and UV resistance.Fabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
BenefitsASA is hard, scratch and impact resistant.Fabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
BenefitsASA retains its original color for years and does not yellow.Fabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
BenefitsCompared to the standard plastics, ASA is characterized above all by higher strength, toughness, rigidity and resistance to fats and oils.Fabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
BenefitsThis plastic not only has high heat resistance, it is also particularly resistant to chemicals and can be used for temperatures of up to 92 ° C.Fabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
BenefitsGreater strength and toughness than ABS - particularly resistant to chemicalsFabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
Pitfalls and limitationsmore expensive than ABS - little choice of colorsFabru, Acrylnitril-Styrol-Acrylester (ASA)p. 1
BenefitsASA retains its original color for years and does not yellow.Fabru, purefil ASA grün 1kg 1.75mmp. 1
BenefitsThe use of high-quality raw materials creates a 3D printer filament that is particularly easy to process.Fabru, purefil ASA grün 1kg 1.75mmp. 1
Precision and toleranceUsing a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers.Fabru, purefil ASA grün 1kg 1.75mmp. 1
Precision and tolerancesmall diameter and roundness tolerancesFabru, purefil ASA grün 1kg 1.75mmp. 1
Benefitseasy to printFabru, purefil ASA grün 1kg 1.75mmp. 1
BenefitsExcellent weather resistanceFabru, purefil ASA grün 1kg 1.75mmp. 1
BenefitsExcellent UV resistanceFabru, purefil ASA grün 1kg 1.75mmp. 1
BenefitsScratch ResistantFabru, purefil ASA grün 1kg 1.75mmp. 1
BenefitsGreater strength and toughness than ABSFabru, purefil ASA grün 1kg 1.75mmp. 1
Benefitsparticularly resistant to chemicalsFabru, purefil ASA grün 1kg 1.75mmp. 1

UltiMaker Precision ASAStrength XY, MPa49Strength Z, MPa—Modulus XY, GPa2.14Charpy notched, kJ/m²—HDT 0.45, °C96HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °C100Drying, °C, h808 h

UltiMaker Precision ASAUltiMaker

Published values

Property	As published	Conditions	On the Overview
UltiMaker, MAKERBOT PRECISION ASA \| Data Sheet9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar
Tensile modulus orientation not stated	310,000 psip. 2: Tensile Modulus (ASTM D638, 50 mm/min)	ASTM D638 As the sheet prints it: 50 mm/min ASTM D638	not in the median: set apart (never used to pass), test bar not described as printed
Tensile modulus orientation not stated	2,167 MPAp. 1: TENSILE MODULUS	no standard stated	not in the median: another value of this product is in it
Tensile strength (yield or break not stated) orientation not stated	49 MPAp. 1: TENSILE STRENGTH	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	7100 psip. 2: Tensile Strength at yield (ASTM D638, 50 mm/min)	ASTM D638 As the sheet prints it: 50 mm/min ASTM D638	not in the median: another value of this product is in it
Elongation at yield orientation not stated	>6%p. 2: Strain at Yield - Elongation (%)	no standard stated	listed under other properties
Flexural modulus orientation not stated	330,000 psip. 2: Flexural Modulus (ASTM D790, 15 mm/min)	ASTM D790 As the sheet prints it: 15 mm/min ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	11,000 psip. 2: Flexural Strength (ASTM D790, 15 mm/min)	ASTM D790 As the sheet prints it: 15 mm/min ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	140 J/mp. 2: Notched Impact Strength (ASTM D256)	ASTM D256 As the sheet prints it: ASTM D256; notched	not in the median: in J/m
HDT at 0.45 MPa	96 °Cp. 2: Heat Deflection (ASTM 648, 66 psi) 204°F	no standard named As the sheet prints it: 66 psi 204°F ASTM 648	not in the median: set apart (never used to pass), test bar not described as printed

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: 100 °Cown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Chamber Print real ABS with 100 C Heated Chamber.UltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 2: METHOD heated chamber

Price

Not in the price sample.

Its 2 documents

What the maker says (9)

Good forMakerBot Precision ASA is a weather-resistant alternative to ABS used widely for functional prototypes and end-use parts in demanding outdoor environments.UltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 1
Good forideal for demanding applications in the automotive, power and utilities, agriculture, oil & gas, and mass transit industries.UltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 1
BenefitsThis thermoplastic formulation has properties similar to MakerBot Real ABS, but with better UV and chemical resistance for retaining gloss, color, and mechanical properties when exposed to the elements.UltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 1
Supports and removalMakerBot ASA is supported by Stratasys® SR-30 support material for unrestricted geometric freedomUltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 1
Good forEngineers and machinists can create functional end-use parts with durability and ductility including snap fits and living hinges capable of withstanding the elements.UltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 2
Good forEnclosures for outdoor electrical equipmentUltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 2
Good forOutdoor signageUltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 2
Good forAll-weather assembly housingsUltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 2
Good forReplacement parts for agricultureUltiMaker, MAKERBOT PRECISION ASA | Data Sheetp. 2

Nobufil ASAStrength XY, MPa36Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²8.5IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C100–120Chamber, °CenclosedDrying, °C, h60–703–6 h

Nobufil ASANobufil

Published values

Property	As published	Conditions	On the Overview
Nobufil, Technical Datasheet ASA12 valuesUnless a row says otherwise: print settings FDM H column (the sheet does not say what H is)
Tensile strength (yield or break not stated) orientation not stated	36 MPap. 1: Tensile strength, FDM H	ISO 527	not in the median: set apart (never used to pass), no stated orientation
Tensile strength (yield or break not stated) orientation not stated	45 MPap. 1: Tensile strength, Injection	ISO 527	not in the median: measured on a moulded bar
Elongation at break orientation not stated	15 %p. 1: Elongation at break, FDM H	ISO 527	not in the median: set apart (never used to pass), no stated orientation
Elongation at break orientation not stated	20 %p. 1: Elongation at break, Injection	ISO 527	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	2200 MPap. 1: Flexural modulus	ISO 178print settings not stated	not in the median: measured on a moulded bar
Flexural strength orientation not stated	60 MPap. 1: Flexural strength	ISO 178print settings not stated	not in the median: measured on a moulded bar
Izod impact strength orientation not stated	8,5 kJ/m²p. 1: Izod Impact strength notched, FDM H	ISO 180	not in the median: set apart (never used to pass), no stated orientation
Izod impact strength orientation not stated	12 kJ/m²p. 1: Izod Impact strength notched, Injection	ISO 180	not in the median: measured on a moulded bar
Izod impact strength orientation not stated	35 kJ/m²p. 1: Izod Impact strength unnotched, FDM H	ISO 180	not in the median: unnotched
Izod impact strength orientation not stated	62 kJ/m²p. 1: Izod Impact strength unnotched, Injection	ISO 180	not in the median: measured on a moulded bar
HDT at 1.8 MPa	91 °Cp. 1: HDT A	ISO 75 As the sheet prints it: HDT A ISO 75 print settings not stated	not in the median: measured on a moulded bar
Density	1,07 g/cm³p. 1: Density	ISO 1183print settings not stated

Print settings

Nozzle: 250–270 °Cown data sheet
Bed: 100–120 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: 60–70 °C for 3–6 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 260°C ± 10; Bed 110°C ± 10; Drying Pre-dry material for 3-6 hours at 60 - 70°C (max.).Nobufil, Technical Datasheet ASAp. 1: Recommended printing settings; p. 1: Drying note

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Good forDue to its longevity and good weather resistance ASA is ideal for printing parts for outdoor applications exposed to direct sunlight.Nobufil, Technical Datasheet ASAp. 1

3DJake ASAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa2.17Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–250Bed, °C60–100Chamber, °CenclosedDrying, °C, h808 h

3DJake ASA3DJake

Published values

Property	As published	Conditions	On the Overview
3DJake, Technical Data Sheet 3DJAKE ASA7 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	22100 kg / cm²p. 1: Tensile modulus	specimen not stated; its document points to a moulded or resin bar, ASTM D790	not in the median: set apart (never used to pass), test bar not described as printed
Tensile strength (yield or break not stated) orientation not stated	held back: the sheet's unit or table layout is unclearheld backp. 1: Tensile strength	ASTM D790	not in the median: held back
Vicat softening temperature	95 °Cp. 1: VICAT A	ISO 306
Melting temperature	190 °Cp. 1: Melting temperature	ISO 3146 As the sheet prints it: ISO 3146-C
Density	1,1 g/ccp. 1: Specific gravity	ISO 1183
Melt mass-flow rate	15 g/10 minp. 1: MFR	ISO 1133
Mould shrinkage orientation not stated	0,5 %p. 1: Shrinking	ISO 294 As the sheet prints it: ISO 294-4

Print settings

Nozzle: 210–250 °Cown data sheet
Bed: 60–100 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29; bed in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29.

Its 3 print profiles, in the documents' words

Nozzle 210 – 250 °C; Bed If you have a heated bed the recommended temperature is ± 60-100˚C3DJake, Technical Data Sheet 3DJAKE ASAp. 1: Recommended printing settings
Nozzle 200 - 240 °C; Bed 40 - 60 °CSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 5: Temperature; p. 5: Hot pad
Nozzle 210 - 250 °C; Bed 60 - 100 °C3DJake, 3DJAKE ASA Black, 1,75 mm / 1000 gp. 1: Recommended processing temperature; p. 1: Recommended heating temperature

Price

Not in the price sample.

Its 4 documents

Chemicals and environment (1)

UV and outdoor: described in wordsWeather and UV resistant ASA filament in blackUV / weather3DJake, 3DJAKE ASA Black, 1,75 mm / 1000 gp. 1

eSUN ASA V1 1Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C250–280Bed, °C100–110Chamber, °CenclosedDrying, °C, h808 h

eSUN ASA V1 1eSUN

Published values

Property	As published	Conditions	On the Overview
eSUN, ASA+ Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value)
Tensile strength (yield or break not stated) orientation not stated	35.7 MPap. 1: Tensile Strength GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Elongation at break orientation not stated	18.0 %p. 1: Elongation at Break GB/T 1040	GB/T 1040	not in the median: measured on a moulded bar
Flexural modulus orientation not stated	2363.9 MPap. 1: Flexural Modulus GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Flexural strength orientation not stated	66.5 MPap. 1: Flexural Strength GB/T 9341	GB/T 9341	not in the median: measured on a moulded bar
Izod impact strength	14.9 kJ/m2p. 1: IZOD Impact Strength GB/T 1843	GB/T 1843	not in the median: measured on a moulded bar
HDT at 0.45 MPa	95.5 ℃p. 1: Heat distortion Temperature	GB/T 1634 As the sheet prints it: GB/T 1634 0.45Mpa	not in the median: measured on a moulded bar
Density	1.06 g/cm3p. 1: Density GB/T 1033	specimen not stated, GB/T 1033

Print settings

Nozzle: 250–280 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 250-280℃; Bed 100-110℃eSUN, ASA+ Technical Data Sheetp. 2: Recommended printing settings: Extruder Temperature; p. 2: Based on Bambu P1S 0.4 mm nozzle; p. 2: Build Platform Temperature

Price

Not in the price sample.

Its 2 documents

What the maker says (4)

Good forIts excellent weatherability and mechanical properties enable it to better withstand the effects of environmental aging, making it commonly used for outdoor applications.eSUN, ASA+ Technical Data Sheetp. 1
Good forOutdoor products • Aeromodels • Electronic appliances • Engineering accessorieseSUN, ASA+ Technical Data Sheetp. 1
BenefitsHigh toughness and high brightnesseSUN, ASA+ Technical Data Sheetp. 1
BenefitsASA+ characteristics similar to ABS, but it offers better resistance to ultraviolet light and harsh weather conditions, with enhanced toughness, rigidity, and high impact resistance.eSUN, ASA+ Technical Data Sheetp. 1

BASF Forward AM Ultrafuse ASAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C260–280Bed, °C100–120Chamber, °CnoneDrying, °C, h604–16 h

BASF Forward AM Ultrafuse ASABASF Forward AM

Published values

Property	As published	Conditions	On the Overview
BASF Forward AM, Ultrafuse ASA Extended TDS: Complete Technical Documentation and Testing Summary21 valuesUnless a row says otherwise: printed specimen after moisture conditioning Samples were conditioned in standard climate (23°C, 50% RH 72h)
Tensile modulus XY	2120 MPap. 5: Young’s Modulus7) ISO 527	ISO 527	not in the median: measured after moisture conditioning
Tensile modulus Z (ZX)	1940 MPap. 5: Young’s Modulus, ZX-Direction	ISO 527	not in the median: measured after moisture conditioning
Tensile strength (yield or break not stated) XY	37.0 MPap. 5: Tensile strength, XY-Direction	ISO 527	not in the median: measured after moisture conditioning
Tensile strength (yield or break not stated) Z (ZX)	26.6 MPap. 5: Tensile strength, ZX-Direction	ISO 527	not in the median: measured after moisture conditioning
Elongation at break XY	5.2 %p. 5: Elongation at Break6) ISO 527	ISO 527	not in the median: measured after moisture conditioning
Elongation at break Z (ZX)	1.9 %p. 5: Elongation at Break, ZX-Direction	ISO 527	not in the median: measured after moisture conditioning
Flexural modulus XZ	2050 MPap. 5: Flexural Modulus ISO 178 TBD	ISO 178	not in the median: measured after moisture conditioning
Flexural modulus ZX	1820 MPap. 5: Flexural Modulus, ZX-Direction	ISO 178	not in the median: measured after moisture conditioning
Flexural strength XZ	67.4 MPap. 5: Flexural Strength ISO 178 TBD	ISO 178	not in the median: measured after moisture conditioning
Flexural strength ZX	44.0 MPap. 5: Flexural Strength, ZX-Direction	ISO 178	not in the median: measured after moisture conditioning
Flexural elongation at break ZX	2.7 %p. 5: Flexural Elongation at Break, ZX-Direction	ISO 178	listed under other properties
Charpy impact strength XY	8.6 kJ/m2p. 5: Impact Strength Charpy ISO 179-2	ISO 179 As the sheet prints it: ISO 179-2 notched	not in the median: measured after moisture conditioning
Charpy impact strength XY	31.3 kJ/m2p. 5: Impact Strength Charpy (unnotched), XY-Direction	ISO 179 As the sheet prints it: ISO 179-2	not in the median: measured after moisture conditioning
Charpy impact strength XZ	7.8 kJ/m2p. 5: Impact Strength Charpy (notched), XZ-Direction	ISO 179 As the sheet prints it: ISO 179-2	not in the median: measured after moisture conditioning
Charpy impact strength XZ	41.0 kJ/m2p. 5: Impact Strength Charpy (unnotched), XZ-Direction	ISO 179 As the sheet prints it: ISO 179-2	not in the median: measured after moisture conditioning
Charpy impact strength ZX	8.3 kJ/m2p. 5: Impact Strength Charpy (unnotched), ZX-Direction	ISO 179 As the sheet prints it: ISO 179-2	not in the median: measured after moisture conditioning
Izod impact strength XY	8.7 J/mphysically implausiblep. 5: Impact Strength Izod (notched), XY-Direction	ISO 180	not in the median: in J/m
Izod impact strength XY	23.2 J/mphysically implausiblep. 5: Impact Strength Izod (unnotched), XY-Direction	ISO 180	not in the median: in J/m
Izod impact strength XZ	8.5 J/mphysically implausiblep. 5: Impact Strength Izod (notched), XZ-Direction	ISO 180	not in the median: in J/m
Izod impact strength XZ	40.0 J/mphysically implausiblep. 5: Impact Strength Izod (unnotched), XZ-Direction	ISO 180	not in the median: in J/m
Izod impact strength ZX	8.2 J/mphysically implausiblep. 5: Impact Strength Izod (unnotched), ZX-Direction	ISO 180	not in the median: in J/m

Print settings

Nozzle: 260–280 °Cown data sheet
Bed: 100–120 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 60 °C for 4–16 hown data sheet
Hardened nozzle: not neededBambu Lab Filament Guide

Its print profile, in the documents' words

Nozzle 260 – 280°C; Bed 100 – 120°C; Chamber At least closed chamber, passively heated; Drying Ultrafuse ASA can be dried at 60°C in a hot air dryer or vacuum oven for 4 to 16 hoursBASF Forward AM, Ultrafuse ASA Extended TDS: Complete Technical Documentation and Testing Summaryp. 4: Recommended printing settings; p. 4: Drying recommendations; p. 4: Bed Material

Price

Not in the price sample.

Its 2 documents

What the maker says (2)

Good forUltrafuse® ASA is with its UV resistance and good temperature stability an ideal material for outdoor applications.BASF Forward AM, Ultrafuse ASA Extended TDS: Complete Technical Documentation and Testing Summaryp. 3
Supports and removalSingle material breakaway, XIONEER® VXL 90, XIONEER® VXL 111BASF Forward AM, Ultrafuse ASA Extended TDS: Complete Technical Documentation and Testing Summaryp. 4

Chemicals and environment (1)

UV and outdoor: described in wordsUV resistant | temperature stability | outdoor weather resistantUV / weatherBASF Forward AM, Ultrafuse ASA Extended TDS: Complete Technical Documentation and Testing Summaryp. 1

Extrudr DURAPRO ASAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–270Bed, °C100–110Chamber, °CenclosedDrying, °C, h808 h

Extrudr DURAPRO ASAExtrudr

Published values

Property	As published	Conditions	On the Overview
Extrudr, TECHNICAL DATA SHEET DURAPRO ASA14 valuesUnless a row says otherwise: moulded bar (resin supplier's value)
Tensile modulus	2200 MPap. 1: Tensile modulus (E-Modulus) ASTM D638 MPa	ASTM D638	not in the median: measured on a moulded bar
Tensile strength (yield or break not stated)	62,2 ± 3 MPap. 1: Tensile strength ASTM D638 MPa	ASTM D638	not in the median: measured on a moulded bar
Elongation at break	20 %p. 1: Nominal elongation at break ASTM D638 %	ASTM D638	not in the median: measured on a moulded bar
Elongation at yield	6 %p. 1: Elongation at yield ASTM D638 %	ASTM D638	listed under other properties
Flexural modulus	3500 ± 200 MPap. 1: Flexural modulus (E-Modulus) ASTM D790 MPa	ASTM D790	not in the median: measured on a moulded bar
Flexural strength	78 MPap. 1: Flexural strength ASTM D790 MPa	ASTM D790	not in the median: measured on a moulded bar
Izod impact strength	140 kj/m²physically implausiblep. 1: Notched impact strength ASTM D256 kj/m²	ASTM D256tested at 23°C	not in the median: physically implausible as published
Izod impact strength	held back: the sheet's unit or table layout is unclearheld backp. 1: Unnotched impact strength ASTM D256 kj/m²	ASTM D256tested at -30°C	not in the median: held back
Hardness	105 Rockwell Rp. 1: Hardness Rockwell ASTM D785 R-Skala	ASTM D785	listed under other properties
HDT at 0.45 MPa	96 °Cp. 1: HDT/B ASTM D648 °C	ASTM D648 As the sheet prints it: HDT B ASTM D648	not in the median: measured on a moulded bar
Vicat softening temperature	96 °Cp. 1: VICAT A (VST) ASTM D1525 °C	ASTM D1525
Melting temperature	180-200 °Cp. 1: Melting temperature ISO 3146-C °C	ISO 3146 As the sheet prints it: ISO 3146-C
Density	1.05 g/cm³p. 1: Density ASTM D792 g/cm³	ASTM D792
Mould shrinkage orientation not stated	0.4 %p. 1: Shrinking	specimen not stated, ASTM D955

Print settings

Nozzle: 220–270 °Cown data sheet
Bed: 100–110 °Cown data sheet
Heated chamber: enclosure needed, no temperatureown data sheet
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededown data sheet

Its print profile, in the documents' words

Nozzle 220-270°C; Bed 100-110°CExtrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings

Price

Not in the price sample.

Its 2 documents

What the maker says (6)

Good forIt is therefore particularly suitable for use in the automotive sector and outdoors.Extrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1
BenefitsDuraPro ASA has been specially developed for industrial applications and is characterised by its high UV and weather resistance.Extrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1
Surface finishMatte surfaceExtrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1
Adhesion between layersGood layer and bed adhesionExtrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1
Adhesion between layersDuraPro ASA has been optimised for the FFF/FDM process, so the material has good layer adhesion, thermal stability, improved flow properties and low warping.Extrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1
Nozzle wearHardened Nozzle noExtrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1

Chemicals and environment (1)

UV and outdoor: described in wordsUV and weather resistantUV / weatherExtrudr, TECHNICAL DATA SHEET DURAPRO ASAp. 1

Values are for the colour each sheet tested; pigment can change them.

Reference specimens and studies

A resin or study specimen, not a product you can buy.

Stratasys 355-02141 (ASA)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C240–280Bed, °C90–100Chamber, °CenclosedDrying, °C, h808 h

Stratasys 355-02141 (ASA)Stratasys

A resin or study reference, not a product you can buy.

Published values

Property	As published	Conditions
Rodrigues et al., Polymers 18(2), 302, Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)10 valuesUnless a row says otherwise: printed specimentested at Room temperature print settings Stratasys Fortus 450; XY; 0.254 mm layer; 100% infill; ±45° raster; nozzle 250°C, bed 100°C; ASTM D638-03 specimen ~5.2 mm thick; sinusoidal tension, 10 Hz, R=0.05; sigma_max=28.63 MPa, sigma_min=1.43 MPa, amplitude=13.6 MPa.
Fatigue life XY	308 cyclesp. 5: Fatigue table specimen 1	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	1519 cyclesp. 5: Fatigue table specimen 2	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	123,460 cyclesp. 5: Fatigue table specimen 3	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	1,000,000 cyclesp. 5: Fatigue table specimen 4	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	1,000,000 cyclesp. 5: Fatigue table specimen 5	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	29,658 cyclesp. 5: Fatigue table specimen 6	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	320,571 cyclesp. 5: Fatigue table specimen 7	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	47,978 cyclesp. 5: Fatigue table specimen 8	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	192,376 cyclesp. 5: Fatigue table specimen 9	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles
Fatigue life XY	90,640 cyclesp. 5: Fatigue table specimen 10	no standard named As the sheet prints it: Study staircase method; run-out 1,000,000 cycles

Print settings

Nozzle: 240–280 °CBambu Lab Filament Guide
Bed: 90–100 °CBambu Lab Filament Guide
Heated chamber: enclosure needed, no temperatureBambu Lab Filament Guide
Drying: optional: 80 °C for 8 hBambu Lab Filament Guide
Hardened nozzle: not neededBambu Lab Filament Guide

Price

Not in the price sample.

Its document

Rodrigues et al., Polymers 18(2), 302, Mechanical, Fatigue, and Thermal Characterization of ASA, Nylon 12, PC, and PC-ABS Manufactured by Fused Filament Fabrication (FFF)