PETG-GF
5 products from 5 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
5 products
Key
- set apart: test bar not described as printed, or no stated load
- hardened nozzle
- not published
How the numbers are worked out
Eryone PETG-GFStrength XY, MPa53.6Strength Z, MPa25.1Modulus XY, GPa2.33Izod notched, kJ/m²—HDT 0.45, °C80Price, CAD/kg—Nozzle, °C250–280Bed, °C60–70Chamber, °C—Drying, °C, h60–704–8 h
Eryone PETG-GFEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) PETG-GF14 valuesThe same values also in Eryone, PETG Fiberglass 3D Printer Filament, 1.75mm(1kg) | Eryone - eryone3d and Eryone, Technical Data Sheet (TDS) PETG-GF.Unless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 2334.5 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 2109.7 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPaalso in Eryone, PETG Fiberglass 3D Printer Filament, 1.75mm(1kg) | Eryone - eryone3d | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 53.6 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 25.1 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPaalso in Eryone, PETG Fiberglass 3D Printer Filament, 1.75mm(1kg) | Eryone - eryone3d | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 1.9 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z (X-Z) | 1.7 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 %also in Eryone, PETG Fiberglass 3D Printer Filament, 1.75mm(1kg) | Eryone - eryone3d | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 3027.5 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 78.5 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Charpy impact strength orientation not stated | 3.9 kJ/m2p. 2: Charpy Impact strenght | GB/T 1843As the sheet prints it: GB/T 1843; energy=2.75J | not in the median: notch not stated |
| Impact strength, test unclear | 3.9 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843print settingsprinting temperature=250 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | listed under other properties |
| HDT at 0.45 MPa | 80 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 75 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | specimen not stated, DSCAs the sheet prints it: ° C DSC | in the median |
| Density | 1.33 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 10 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10minalso in Eryone, Technical Data Sheet (TDS) PETG-GF | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
| Eryone, Technical Data Sheet (TDS) PETG-GF1 value | |||
| Fibre content | 10% glass fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 250–280 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60–70 °C for 4–8 hown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 250-280 °C; Bed 60-70 °C; Drying 60-70 °C, 4-8 hEryone, Technical Data Sheet (TDS) PETG-GFPart I: Suggested printing parameters
- Nozzle 250-280 ℃; Bed 60-70℃; Drying 60 -65 ,6-8hEryone, Technical Data Sheet (TDS) PETG-GFp. 1: Recommended printing settings; p. 1: Drying conditions; p. 1: Sealed printing; p. 1: Bed material
- Nozzle 250-280℃; Bed 60-70℃; Drying 60℃-70℃,4-8HEryone, PETG Fiberglass 3D Printer Filament, 1.75mm(1kg) | Eryone - eryone3dp. 1: Nozzle temperature; p. 1: Build plate temperature; p. 1: Bed material; p. 1: Sealed printing; p. 1: Drying conditions
Price
Not in the price sample.
Its 4 documents
What the maker says (4)
- Good for
It is particularly suitable for manufacturing structural components or outdoor models that require high impact resistance and durability against drops.
Eryone, Technical Data Sheet (TDS) PETG-GFp. 1 - Benefits
ERYONE PETG-GF filament is an enhanced PETG material that offers excellent flow properties and ease of printing, along with low odor and outstanding chemical resistance.
Eryone, Technical Data Sheet (TDS) PETG-GFp. 1 - Warping and shrinkage
Parts printed with this material are not only strong and durable but also exhibit excellent dimensional stability
Eryone, Technical Data Sheet (TDS) PETG-GFp. 1 - Surface finish
featuring a fine matte and frosted texture on the surface.
Eryone, Technical Data Sheet (TDS) PETG-GFp. 1
QIDI PETG GFStrength XY, MPa45Strength Z, MPa28Modulus XY, GPa2.2Izod notched, kJ/m²—HDT 0.45, °C76Price, CAD/kg37Nozzle, °C250–275Bed, °C60–80Chamber, °C—Drying, °C, h704–6 h
QIDI PETG GFQIDI
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| QIDI, Technical Data Sheet QIDI PETG-GF15 values | |||
| Tensile modulus XY | 2200-2400 MPap. 2: Young's Modulus (MPa) (XY) | ISO 527As the sheet prints it: ISO 527; infill=100% | in the median |
| Tensile modulus XZ | 2300-2400 MPap. 2: Young's Modulus (MPa) (XZ) | ISO 527As the sheet prints it: ISO 527; infill=100% | not in the median: measured on a bar in another orientation |
| Tensile modulus ZX | 1100-1400 MPap. 2: Young's Modulus (MPa) (ZX) | ISO 527As the sheet prints it: ISO 527; infill=100% | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) XY | 45-51 MPap. 2: Tensile Strength (MPa) (XY) | ISO 527As the sheet prints it: ISO 527; infill=100% | in the median |
| Tensile strength (yield or break not stated) XZ | 48-51 MPap. 2: Tensile Strength (MPa) (XZ) | ISO 527As the sheet prints it: ISO 527; infill=100% | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) ZX | 25-31 MPap. 2: Tensile Strength (MPa) (ZX) | ISO 527As the sheet prints it: ISO 527; infill=100% | not in the median: measured on a bar in another orientation |
| Elongation at break XY | 4-8 %p. 2: Elongation at Break (%) (XY) | ISO 527As the sheet prints it: ISO 527; infill=100% | in the median |
| Elongation at break XZ | 7-10 %p. 2: Elongation at Break (%) (XZ) | ISO 527As the sheet prints it: ISO 527; infill=100% | not in the median: measured on a bar in another orientation |
| Elongation at break ZX | 2-7 %p. 2: Elongation at Break (%) (ZX) | ISO 527As the sheet prints it: ISO 527; infill=100% | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 76 ℃p. 3: Heat Deflection Temperature ISO 75 (HDT) | ISO 75 | in the median |
| Glass transition temperature | ~66℃p. 3: GlassTransition Temperature | ISO 11357 | in the median |
| Vicat softening temperature | 85 ℃p. 3: Vicat Softening Temperature ISO 306 (VST) | ISO 306 | |
| Density | 1.25-1.28 g/cm³p. 3: Density ISO 1183 | ISO 1183 | |
| Melt mass-flow rate | 5-10 g/10 minp. 3: Melt Flow Rate (MFR) | ISO 1133 | |
| Fibre content | 5% short-cut glass fibersp. 2: Fibre content | no standard stated | |
| QIDI, QIDI Filament Guide | Choose the Right Filament3 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) Z | 28.0MPap. 1: Tensile Strength - Z | no standard stated | in the median |
| Flexural modulus XY | 2450.0MPap. 1: Bending Modulus - XY | no standard stated | in the median |
| Flexural strength XY | 77.5MPap. 1: Bending Strength - XY | no standard stated | in the median |
Print settings
- Nozzle
- 250–275 °Cown data sheet
- Bed
- 60–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 70 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 250-275℃; Bed 60-80℃QIDI, Technical Data Sheet QIDI PETG-GFp. 5: Recommended printing settings; p. 5: Recommended Build Surface; p. 5: Footnote
- Nozzle 250-275°C; Drying Required; Blast Drying Oven: 70°C / 4-6 hQIDI, QIDI Filament Guide | Choose the Right Filamentp. 1: Is drying highly recommended?; p. 1: Recommended hardware settings; p. 1: Extruder heat range
Price
37 CAD/kgits one regular price in the sample
1 listing
- QIDI Canada: 37 CAD/kgPETG-GF / 1 Kg / Black HEX Code #000000 (SKU 043BLK-1-1000)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (4)
- Odour and emissions
Odor / Low odor
QIDI, Technical Data Sheet QIDI PETG-GFp. 3 - Moisture sensitivity
Blast Drying Oven: 70°C / 4-6 h
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1 - Nozzle wear
0.4–0.8 mm / Hardened steel nozzle or harder
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1 - Printing advice
80-90°C / 2-4 h (optional; support parts)
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1
Nanovia PETG GF UVStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa2.81Izod notched, kJ/m²—HDT 0.45, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C80–90Chamber, °C20Drying, °C, h604 h
Nanovia PETG GF UVNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanovia7 valuesUnless a row says otherwise: printed specimenprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | |||
| Tensile modulus XY | 2810 MPap. 1: Young’s modulus (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1A | in the median |
| Tensile modulus orientation not stated | 4284 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1A | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 42 MPap. 1: Ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1A | in the median |
| Tensile strain at strength XY | 2.6 %p. 1: Elongation ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1A | listed under other properties |
| Tensile strain at strength orientation not stated | 2.3 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1A | listed under other properties |
| Glass transition temperature | 80 °Cp. 1: Tg | specimen not stated, no standard statedprint settings not stated | in the median |
| Density | 1.42 g/cm3p. 1: Density | specimen not stated, ISO 1183print settings not stated | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 80–90 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 60 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 220 – 240 °C; Bed 80 – 90 °C; Chamber 20 °C; Drying Dehydrate for 4h at 60°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal); p. 1: 3D Printing
Price
Not in the price sample.
Its 3 documents
What the maker says (9)
- Good for
By combining glass fibres, anti-UV additives and PETG, natively waterproof and resistant to temperatures up to 80 °C, Nanovia PETG GF UV is the perfect filament for parts subjected to outdoor conditions.
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Good for
This filament is also suitable for electrical applications, The glass fibres do not conduct electricity, unlike Nanovia PETG CF ’s carbon fibres.
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Good for
GPS beacon housings in PETG GF UV
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Benefits
Easy to print
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Benefits
Nanovia PETG GF UV doesn’t require a 3D printer with a closed/heated enclosure, unlike ASA.
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Benefits
It’s two times as rigid and 40 % more resistant compared to native PETG filament.
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Warping and shrinkage
This ease of printing is made possible by the addition of glass fibres which strongly reduce the warping of the polymer during the 3D printing process.
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Nozzle wear
A reinforced nozzle, suitable for abrasive materials is recommended.
Nanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Pitfalls and limitations
The product is not approved for medical applications.
Nanovia, PETG GF UV official material safety data sheetp. 2: Section7.2 safe storage/use exclusion
Chemicals and environment (2)
- UV and outdoor: described in words
UV and water resistant
UVNanovia, Nanovia PETG GF UV : Glass fiber reinforced : Nanoviap. 1 - Organic solvent resistance: described in words
Some Organic solvents could degrade the material.
Nanovia, PETG GF UV official material safety data sheetp. 2: Section10.3 possible side reactions
Nobufil PETG GFStrength XY, MPa56Strength Z, MPa—Modulus XY, GPa—Izod notched, kJ/m²1.5HDT 0.45, °C—Price, CAD/kg—Nozzle, °C245–265Bed, °C70–90Chamber, °C—Drying, °C, h60–703–6 h
Nobufil PETG GFNobufil
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nobufil, Technical Datasheet PETG GF13 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 56 MPap. 1: Tensile strength, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strength (yield or break not stated) orientation not stated | 64 MPap. 1: Tensile strength, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 8 %p. 1: Elongation at break, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Elongation at break orientation not stated | 15 %p. 1: Elongation at break, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 3400 MPap. 1: Flexural modulus | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 82 MPap. 1: Flexural strength | ISO 178 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 1,5 kJ/m²p. 1: Izod Impact strength notched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: the only value of its test, shown as published |
| Izod impact strength orientation not stated | 1,8 kJ/m²p. 1: Izod Impact strength notched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 19 kJ/m²p. 1: Izod Impact strength unnotched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: unnotched |
| Izod impact strength orientation not stated | 62 kJ/m²p. 1: Izod Impact strength unnotched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 94 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Density | 1,36 g/cm³p. 1: Density | ISO 1183 | |
| Fibre content | 10% glass fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 245–265 °Cown data sheet
- Bed
- 70–90 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60–70 °C for 3–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 255°C ± 10; Bed 80°C ± 10; Drying Pre-dry material for 3-6 hours at 60 - 70°C (max.).Nobufil, Technical Datasheet PETG GFp. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Nozzle wear
Nozzle hardened
Nobufil, Technical Datasheet PETG GFp. 1
iSANMATE PETG Glass FiberStrength XY, MPa53Strength Z, MPa—Modulus XY, GPa—Izod notched, kJ/m²—HDT 0.45, °C—Price, CAD/kg—Nozzle, °C250–270Bed, °C90–100Chamber, °C—Drying, °C, h—
iSANMATE PETG Glass FiberiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PETG Glass Fiber8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 53 MPap. 1: Tensile Strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 98 %physically implausiblep. 1: Elongation | ASTM D638 | not in the median: physically implausible as published |
| Flexural modulus orientation not stated | 1986 MPap. 1: Flexural modulus | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 72 ℃transcription correctedp. 1: Vicatsoftening point A/ | ASTM D648As the sheet prints it: Vicat A/120 (the TDS cites ASTM D-648 beside it) | |
| Melting temperature | 190--220 ℃p. 1: Melting point | DSC | |
| Density | 1.26-1.30 g/cm3p. 1: Density | ASTM D792 | |
| Water absorption | <0.8 %p. 1: Water absorption | ASTM D570 | |
| Melt mass-flow rate | 2-9 g/10minp. 1: Melt Index(210℃, 2160g) | ASTM D1238As the sheet prints it: ASTM D-1238; 2160g | |
| iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial parts1 value | |||
| Fibre content | 20% glass fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 250–270 °Cown data sheet
- Bed
- 90–100 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- No temperature statediSANMATE, PETG Glass FiberRecommended printing settings
- Nozzle 250-270℃; Bed 90-100℃iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1: Product parameters
Price
Not in the price sample.
Its 3 documents
What the maker says (12)
- Benefits
High rigidity and excellent toughness
iSANMATE, PETG Glass Fiberp. 1 - Benefits
Excellent heat resistance and short processing cycle
iSANMATE, PETG Glass Fiberp. 1 - Benefits
Excellent hydrolysis resistance and product stability
iSANMATE, PETG Glass Fiberp. 1 - Good for
iSANMATE PETG Glass Fiber filament combines strength and precision, ideal for demanding 3D printing projects.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Benefits
High strength: The addition of glass fiber significantly improves the mechanical strength of PETG, making it more suitable for load-bearing or functional parts.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Benefits
High rigidity: Glass fiber enhances the rigidity of the material and reduces the risk of deformation of the printed parts.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Benefits
Chemical resistance: PETG itself has good chemical resistance, and the addition of glass fiber further enhances its corrosion resistance.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Benefits
Enhanced wear resistance: The addition of glass fiber improves the wear resistance of the material and extends the service life of the print.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Benefits
Shows 80% PETG matrix with 20% glass fiber for enhanced strength.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Warping and shrinkage
Highlights firm bed adhesion, stable base, and no warping during printing.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Benefits
Details glass fiber PETG’s ability to withstand up to 85°C for industrial uses.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1 - Benefits
Showcases iSANMATE PETG Glass Fiber Filament’s mechanical strengths (toughness, strength, resistance), environmental resistances (abrasion, chemical, drop), and printing – friendly quality (neat winding, smooth extrusion, precise diameter) for reliable 3D prints.
iSANMATE, iSANMATE Durable PETG Glass Fiber Filament for industrial partsp. 1
No product matches "".
Not published by any product: HDT at 1.8 MPa.
Values are for the colour each sheet tested; pigment can change them.