PLA-GF
4 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
4 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- sold as toughened
- added filler or additive
- hardened nozzle
- not published
How the numbers are worked out
Polymaker HT PLA GFStrength XY, MPa50.1Strength Z, MPa23.7Modulus XY, GPa3.79Charpy notched, kJ/m²5.31HDT 0.45, °C76HDT 1.8, °C60Price, CAD/kg41Nozzle, °C210–230Bed, °C25–60Chamber, °CnoneDrying, °C, h606 h
Polymaker HT PLA GFPolymaker
Modified: crystallising grade. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
a document with no title recorded29 valuesThe same values also in another document.Unless a row says otherwise:print settingsPrinting temperature 230°C Bed temperature 50°C Shell 2 Top & bottom layer 3 Infill 100% Environmental temperature Ambient temperature Cooling fan ON | |||
| Tensile modulus XY | 4206.91±182.01 MPap. 4: Young's modulus (X-Y) | ISO 527, GB/T 1040annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Tensile modulus Z | 3052.15±101.57 MPap. 4: Young's modulus (Z) | ISO 527, GB/T 1040annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Tensile strength (yield or break not stated) XY | 50.2±0.93 MPap. 4: Tensile strength (X-Y) | ISO 527, GB/T 1040annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Tensile strength (yield or break not stated) Z | 22.46±1.54 Mpap. 4: Tensile strength (Z) | ISO 527, GB/T 1040annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Elongation at break XY | 2.3±0.2 %p. 4: Elongation at break (X-Y) | ISO 527, GB/T 1040annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Elongation at break Z | 0.79±0.07 %p. 4: Elongation at break (Z) | ISO 527, GB/T 1040annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Flexural modulus XY | 3684.87±115.49 MPap. 4: Bending modulus (X-Y) | ISO 178, GB/T 9341as printedAs printed | not in the median: added filler or additive |
| Flexural modulus XY | 3948.4±67.03 MPap. 4: Bending modulus (X-Y) | ISO 178, GB/T 9341annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Flexural modulus Z | 2197.76±269.42 MPap. 4: Bending modulus (Z) | ISO 178, GB/T 9341as printedAs printed | not in the median: added filler or additive |
| Flexural modulus Z | 1953.62±260.81 Mpap. 4: Bending modulus (Z)also in another document | ISO 178, GB/T 9341annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Flexural strength XY | 86.41±1.38 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341as printedAs printed | not in the median: added filler or additive |
| Flexural strength XY | 87.76±1.96 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Flexural strength Z | 29.17±2.69 MPap. 4: Bending strength (Z) | ISO 178, GB/T 9341annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength XY | 5.31±0.46 kJ/m2p. 4: Notched Charpy impact strength (X-Y) | no standard statedas printedAs printed | not in the median: added filler or additive |
| Charpy impact strength XY | 4.92+/-0.5 kJ/m2transcription correctedp. 4: Notched Charpy impact | ISO 179, GB/T 1043annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength Z | 4.37+/-0.27 kJ/m2transcription correctedp. 4: Notched Charpy impact | ISO 179, GB/T 1043annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength Z | 4.28±0.18 kJ/m2p. 4: Notched Charpy impact strength (Z)also in another document | no standard statedas printedAs printed | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 75.5 °Cp. 3: Heat deflection temperaturealso in another document | ISO 75As the sheet prints it: ISO 75 0.45MPaas printedAs printed | not in the median: added filler or additive |
| HDT at 0.45 MPa | 114.7 °Cp. 3: Heat deflection temperaturealso in another document | ISO 75As the sheet prints it: ISO 75 0.45MPaannealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| HDT at 1.8 MPa | 59.7 °Cp. 3: Heat deflection temperaturealso in another document | ISO 75As the sheet prints it: ISO 75 1.8MPaas printedAs printed | not in the median: added filler or additive |
| HDT at 1.8 MPa | 84 °Cp. 3: Heat deflection temperaturealso in another document | ISO 75As the sheet prints it: ISO 75 1.8MPaannealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | not in the median: annealed; the as-printed value is in it |
| Vicat softening temperature | 148.9 °Cp. 3: Vicat softening temperaturealso in another document | ISO 306, GB/T 1633as printedAs printed | |
| Vicat softening temperature | 148.3 °Cp. 3: Vicat softening temperature | ISO 306, GB/T 1633annealed at a temperature its sheet does not state for a time its sheet does not stateAnnealed (per TDS annealed block) | |
| Melting temperature | 174.87 °Cp. 3: Melting temperature | DSCAs the sheet prints it: DSC, 10°C/min | |
| Crystallization temperature | 81.56 °Cp. 3: Crystallization temperature | DSCAs the sheet prints it: DSC, 10°C/min | |
| Decomposition temperature | 348.15°Cp. 3: Decomposition temperature | TGAAs the sheet prints it: TGA; rate=20°C/min | |
| Density | 1.337 g/cm3p. 2: Density | ISO 1183, GB/T 1033 | |
| Melt mass-flow rate | 22.9 g/10min g/10 minp. 2: Melt indexalso in another document | no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Fibre content | 12% glass fiberp. 5: Fibre content | no standard statedprint settings not stated | |
| a document with no title recorded12 valuesThe same values also in another document.Unless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 3793.85 ± 129.17 MPap. 1: Young’s modulus (X-Y)also in another document | ISO 527, GB/T 1040as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: added filler or additive |
| Tensile modulus Z | 3018.1 ± 83.42 MPap. 1: Young’s modulus (Z)also in another document | no standard namedAs the sheet prints it: Z as printedas printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) XY | 50.09 ± 0.73 MPap. 1: Tensile strength (X-Y)also in another document | ISO 527, GB/T 1040as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) Z | 23.68 ± 1.28 MPap. 1: Tensile strength (Z)also in another document | no standard namedAs the sheet prints it: Z as printedas printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: added filler or additive |
| Elongation at break XY | 2.77 ± 0.45 %p. 1: Elongation at break (X-Y)also in another document | ISO 527, GB/T 1040as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: added filler or additive |
| Elongation at break Z | 0.85 ± 0.05 %p. 1: Elongation at break (Z)also in another document | no standard namedAs the sheet prints it: Z as printedas printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: added filler or additive |
| Flexural strength Z | 29.21 ± 1.42 MPap. 1: Bending strength (Z)also in another document | no standard namedAs the sheet prints it: Z as printedas printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: added filler or additive |
| Glass transition temperature | 59.76 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in another document | DSC | not in the median: added filler or additive |
| Density | 1.34 g/cm3p. 1: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Mould shrinkage XY | 0.05%p. 1: Shrinkage (X-Y) | no standard stated | |
| Mould shrinkage Z | 0.05%p. 1: Shrinkage (Z) | no standard stated | |
| Mould shrinkage orientation not stated | 0.10%p. 1: Shrinkage (D) | no standard namedAs the sheet prints it: column=D | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
- Annealing
- temperature not statedown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 210-230 (°C); Bed 25-60 (°C); Drying 60°C for 6ha document with no title recordedRecommended printing settings; p. 5: Drying setting; p. 5: Closure chamber; p. 5: Build surface treatment; p. 5: Additional requirements
- Nozzle 210-230°C; Bed 25-60°C; Drying 60°C/6Ha document with no title recordedp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment
Price
41 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 41 CAD/kgPolymaker HT-PLA-GF 1.75mm 1Kg / Black (SKU PMK-HTPGF-BLK-175-1KG)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (7)
- Good for
It’s ideal for applications requiring high thermal stability, withstanding mechanical stress and temperatures up to 100°C.
a document with no title recordedp. 2 - Benefits
Polymaker™ HT-PLA-GF offers improved heat resistance after annealing while maintaining PLA's ease of printing.
a document with no title recordedp. 2 - Warping and shrinkage
Shrinkage (D) 0.10%
a document with no title recordedp. 3 - Warping and shrinkage
Shrinkage (X-Y) 0.05%
a document with no title recordedp. 3 - Warping and shrinkage
Thin parts may require the lower annealing temperature to prevent warping.
a document with no title recordedp. 5 - Nozzle wear
Additional requirements Hardened nozzle & print annealing
a document with no title recordedp. 5 - Moisture sensitivity
It is highly recommended to use the PolyBox™ or PolyDryer™ Box when printing or storing Polymaker™ HT-PLA-GF
a document with no title recordedp. 1
Chemicals and environment (6)
- Acid resistance: resistant
Good
Effect of weak acids · weaka document with no title recordedEffect of weak acids - Acid resistance: not resistant
Poor
Effect of strong acids · stronga document with no title recordedEffect of strong acids - Alkali resistance: limited
Fair
Effect of weak alkalis · weaka document with no title recordedEffect of weak alkalis - Alkali resistance: not resistant
Poor
Effect of strong alkalis · stronga document with no title recordedEffect of strong alkalis - Oil and grease resistance: resistant
Good
Effect of oils and greasea document with no title recordedEffect of oils and grease - Post-processing: described in words
Annealing temperature 80-100 (°C) (Recommended 100°C); Annealing time 20-30 Mins (Recommended 30 mins)
a document with no title recordedp. 5: Annealing temperature; Annealing time
iSANMATE PLA Glass FiberStrength XY, MPa46Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C—Bed, °C—Chamber, °C—Drying, °C, h—
iSANMATE PLA Glass FiberiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PLA Glass Fiber7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) | 46-56 MPap. 1: Tensile Streng | printed specimen (implied by the document), no standard namedAs the sheet prints it: ISO | in the median |
| Elongation at break orientation not stated | 2-6 %p. 1: Elongation | no standard namedAs the sheet prints it: ISO | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2300-2600 MPap. 1: Flexural modulus | no standard namedAs the sheet prints it: ISO | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 42-52 MPap. 1: Bending | printed specimen (implied by the document), no standard namedAs the sheet prints it: ISO | in the median |
| Density | 1.25-1.30 g/cm3p. 1: Density | ASTM D792 | |
| Water absorption | <0.8 %p. 1: Water | ASTM D570 | |
| Melt mass-flow rate | 4-10 g/10minp. 1: Melt Flow Index(220℃,10Kg) | ASTM D1238As the sheet prints it: ASTM D-1238; 10Kg | |
Print settings
- Nozzle
- not stated
- Bed
- not stated
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- No temperature statediSANMATE, PLA Glass FiberRecommended printing settings
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
High material strength, the printed model is durable
iSANMATE, PLA Glass Fiberp. 1 - Warping and shrinkage
The shrinkage rate is low, even if the model is printed in a larger size, it is not easy to deform and warp
iSANMATE, PLA Glass Fiberp. 1 - Surface finish
Good matte texture
iSANMATE, PLA Glass Fiberp. 1 - Good for
PLA-Glass Fiber blends PLA’s eco-friendliness with glass fiber strength—biodegradable, stiff, ideal for sustainable goods and lightweight parts.
iSANMATE, iSANMATE Brings New Glass Fiber Series to Formnext Shenzhenp. 1
Nobufil PLAx GFStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–235Bed, °C55–75Chamber, °C—Drying, °C, h503–6 h
Nobufil PLAx GFNobufil
Sold as toughened or impact-modified: "Due to its impact modification PLAx GF offers increased tear and break resistance similar to ABS while maintaining the typical printing properties known from PLA." (Nobufil, Technical Datasheet PLAx GF, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nobufil, Technical Datasheet PLAx GF13 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 40 MPap. 1: Tensile strength, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strength (yield or break not stated) orientation not stated | 48 MPap. 1: Tensile strength, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 12 %p. 1: Elongation at break, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Elongation at break orientation not stated | 14 %p. 1: Elongation at break, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 3600 MPap. 1: Flexural modulus | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 89 MPap. 1: Flexural strength | ISO 178 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 5 kJ/m²p. 1: Izod Impact strength notched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Izod impact strength orientation not stated | 5,5 kJ/m²p. 1: Izod Impact strength notched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 16 kJ/m²p. 1: Izod Impact strength unnotched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: unnotched |
| Izod impact strength orientation not stated | 32 kJ/m²p. 1: Izod Impact strength unnotched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 54 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Density | 1,20 g/cm³p. 1: Density | ISO 1183 | |
| Fibre content | 10% glass fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 215–235 °Cown data sheet
- Bed
- 55–75 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 50 °C for 3–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 225°C ± 10; Bed 65°C ± 10; Drying Pre-dry material for 3-6 hours at 50°C (max.).Nobufil, Technical Datasheet PLAx GFp. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Due to its impact modification PLAx GF offers increased tear and break resistance similar to ABS while maintaining the typical printing properties known from PLA.
Nobufil, Technical Datasheet PLAx GFp. 1 - Nozzle wear
Nozzle hardened
Nobufil, Technical Datasheet PLAx GFp. 1
eSUN PLA GFStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °C—Drying, °C, h—
eSUN PLA GFeSUN
Sold as toughened or impact-modified: "PLA-GF is a printing consumable developed on the basis of PLA, in which 15-20% glass fiber is added to greatly enhance the rigidity and impact resistance of ordinary PLA." (eSUN, ePLA-GF Technical Data Sheet, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePLA-GF Technical Data Sheet8 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 59.27 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 7.99 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 4414.89 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 85.01 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 10.16 kJ/m²p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 56 ℃p. 1: Heat distortion Temperature GB/T 1634 | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.31 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
| Fibre content | 15-20% glass fiberp. 1: Fibre content | specimen not stated, no standard stated | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 45-60°CeSUN, ePLA-GF Technical Data Sheetp. 2: Recommended printing settings; p. 2: Footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (7)
- Good for
Suitable for prototypes of mechanical parts that require rigidity and impact resistance
eSUN, ePLA-GF Technical Data Sheetp. 1 - Good for
The wear resistance makes it suitable for printing gears and can be used as temporary functional parts
eSUN, ePLA-GF Technical Data Sheetp. 1 - Good for
Mechanical component • electronic engineering
eSUN, ePLA-GF Technical Data Sheetp. 1 - Benefits
PLA-GF is a printing consumable developed on the basis of PLA, in which 15-20% glass fiber is added to greatly enhance the rigidity and impact resistance of ordinary PLA.
eSUN, ePLA-GF Technical Data Sheetp. 1 - Benefits
High impact resistance and good printability of PLA
eSUN, ePLA-GF Technical Data Sheetp. 1 - Benefits
High wear resistance
eSUN, ePLA-GF Technical Data Sheetp. 1 - Benefits
High rigidity • Excellent printability
eSUN, ePLA-GF Technical Data Sheetp. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.