PLA-CF
19 products from 17 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
19 products
Key
- set apart: test bar not described as printed, or no stated load
- from the Bambu Lab Filament Guide
- Izod where no Charpy is published
- sold as toughened
- hardened nozzle
- not published
How the numbers are worked out
Bambu Lab PLA-CFStrength XY, MPa38Strength Z, MPa26Modulus XY, GPa2.79Charpy notched, kJ/m²7.6HDT 0.45, °C55HDT 1.8, °C54Price, CAD/kg41Nozzle, °C210–240Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA-CFBambu Lab
Sold as toughened or impact-modified: "Bambu PLA-CF is a custom-blended tough PLA with carbon fibers added to improve the hardness and bending modulus" (Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CF, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CF21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 230 °C Bed Temperature 35 °C Printing Speed 180 mm/s Infill Density 100% * All the specimens were printed at the following settings: Nozzle Temperature = 230 °C, Printing Speed = 180 mm/s, Bed Temperature = 35 °C, Infill Density = 100%. All the specimens were annealed and dried at 55 °C for 8 h before testing. And | |||
| Tensile modulus XY | 2790 ± 120 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2160 ± 90 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 38 ± 4 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 26 ± 2 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 8.4 ± 3.2 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 3.6 ± 0.7 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 3950 ± 190 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2260 ± 180 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 89 ± 4 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 49 ± 3 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 23.2 ± 3.7 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength XY | 7.6 ± 2.6 kJ/m²(notched)p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | not in the median: sold as toughened, set apart |
| Charpy impact strength XY | 7.8 ± 0.7 kJ/m²p. 2: Impact Strength (X-Y) — notch unspecified; repeated XY label retained | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 55 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 54 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 63 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 69 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 165 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.22 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.42 %p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: te 25 °C, 55% RH | |
| Melt mass-flow rate | 3.7 ± 0.6 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: crystallization temperature. | |||
| Bambu Lab, Bambu Lab PLA-CF safety data sheet1 value | |||
| Fibre content | 5-10 %p. 5: Carbon fiber | no standard stated | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210 - 240 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA-CFRecommended printing settings
Price
41 CAD/kgits one regular price in the sample
4 listings: 1 in its price, 3 with no regular price per kilogram recorded
- Bambu Lab Canada: 45 per kg, sale pricePLA-CF - Black (14100) / Filament with spool / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- Bambu Lab Canada: 45 per kg, sale pricePLA-CF - Burgundy Red (14200) / Filament with spool / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- Bambu Lab Canada: 41 CAD/kgPLA-CF - Black (14100) / Refill / 1 kgin its price; seen 10 Sep 2026
- Bambu Lab Canada: 41 per kg, sale pricePLA-CF - Lava Gray (14101) / Refill / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
Its 3 documents
What the maker says (4)
- Surface finish
The resulting prints have a matte finish with almost invisible layer lines, making them ideal for prototypes of components that have to have a premium non-glossy look.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFp. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFp. 3 - Benefits
Bambu PLA-CF is a custom-blended tough PLA with carbon fibers added to improve the hardness and bending modulus
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFp. 1
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFTest specimen preparation
Chemicals and environment (7)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFFlammability - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA-CF is 55 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA-CFp. 3: Annealing note
Polymaker Polylite PLA CFStrength XY, MPa31.2Strength Z, MPa15.1Modulus XY, GPa3.28Charpy notched, kJ/m²5.5HDT 0.45, °C54HDT 1.8, °C50Price, CAD/kg—Nozzle, °C190–230Bed, °C25–60Chamber, °C25–45Drying, °C, h556 h
Polymaker Polylite PLA CFPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, PolyLite™ PLA-CF16 valuesThe same values also in Polymaker, Polylite™ PLA-CF Technical Data Sheet. | |||
| Tensile modulus XY | 2945 ± 100 MPap. 4: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Tensile modulus Z | 2143 ± 91 MPap. 4: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 28.28 ± 0.7 MPap. 4: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) Z | 12.54 ± 0.7 MPap. 4: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Elongation at break XY | 4.2 ± 0.12 %p. 4: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Elongation at break Z | 0.75 ± 0.08 %p. 4: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Flexural modulus XY | 3215 ± 182 MPap. 4: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Flexural strength XY | 54.2 ± 1.4 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Charpy impact strength XY | 4.82 ± 0.14 kJ/m2p. 4: Charpy impact strength (X-Y) | ISO 179, GB/T 1043print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: notch not stated |
| HDT at 1.8 MPa | 50.4 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa 75 ISO 75 | not in the median: another value of this product is in it |
| Glass transition temperature | 61.8 °Cp. 3: Glass transition temperature DSC, 10°C/min | DSC | not in the median: another value of this product is in it |
| Vicat softening temperature | 64.1 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 162.4 °Cp. 3: Melting temperature DSC, 10°C/min | DSC | |
| Density | 1.29 g/cm3p. 2: Density ISO1183, GB/T1033also in Polymaker, Polylite™ PLA-CF Technical Data Sheet | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.38 %p. 2: Equilibrium water absorption (%)=also in Polymaker, Polylite™ PLA-CF Technical Data Sheet | no standard stated | |
| Melt mass-flow rate | 9.2 g/10minp. 2: Melt index 210°C, 2.16 kgalso in Polymaker, Polylite™ PLA-CF Technical Data Sheet | no standard namedAs the sheet prints it: 210°C 2.16 kg | |
Polymaker, Polylite™ PLA-CF Technical Data Sheet12 valuesThe same values also in Polymaker, PolyLite™ PLA-CF.Unless a row says otherwise: printed specimenprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | |||
| Tensile modulus XY | 3280.7 ± 79.6 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2213.1 ± 42.9 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 31.2 ± 0.7 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 15.1 ± 0.7 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 13.2 ± 1.7 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 0.9 ± 0.1 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 3380.5 ± 52.1 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 51.7 ± 0.6 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 5.5±0.2 kJ/m²p. 1: Charpy impact strength (X-Y) notched | ISO 179, GB/T 1043print settings not stated | in the median |
| HDT at 0.45 MPa | 54 °Ctranscription correctedp. 1: Heat deflection temp. ISO 75 0.45MPaalso in Polymaker, PolyLite™ PLA-CF | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO 75 | in the median |
| HDT at 1.8 MPa | 50 °Ctranscription correctedp. 1: Heat deflection temp. ISO 75 1.8MPa | printed specimen (implied by the document), ISO 75As the sheet prints it: 1.8MPa ISO 75 | in the median |
| Glass transition temperature | 62 °Cp. 1: Glass transition temp. DSC, 10°C/min | specimen not stated, DSCprint settings not stated | in the median |
| Polymaker, PolyLite PLA-CF 1.75mm 3D printer filament | Polymaker1 value | |||
| Fibre content | 8%p. 1: chopped carbon fiber by weight | no standard stated | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): heated chamber in Polymaker, PolyLite PLA-CF 1.75mm 3D printer filament | Polymaker; drying in Polymaker, PolyLite PLA-CF 1.75mm 3D printer filament | Polymaker.
Its 3 print profiles, in the documents' words
- Nozzle 190-230°C; Bed 25-60°C; Drying 55°C/6HPolymaker, Polylite™ PLA-CF Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature, Build plate temperature; p. 1: Footnote
- Nozzle 190 – 220 (℃); Bed 30 - 60 (˚C); Chamber Room temperature - 45 (˚C)Polymaker, PolyLite™ PLA-CFp. 4: Recommended printing settings: Nozzle temperature; p. 4: Environmental temperature; p. 4: Build surface material
- Nozzle 190-230 °C; Bed 25-60 °C; Drying 55˚C for 6h (Only if the material has absorbed moisture)Polymaker, PolyLite PLA-CF 1.75mm 3D printer filament | Polymakerp. 1: Technical Specifications (Nozzle, Bed, Enclosure, Compatibility); p. 1: Drying Settings
Price
Not in the price sample.
Its 4 documents
What the maker says (3)
- Surface finish
PolyLite™ PLA-CF is a high-quality PLA reinforced with carbon fiber designed for functional applications and smooth and matte surface finish.
Polymaker, Polylite™ PLA-CF Technical Data Sheetp. 1 - Surface finish
PolyLite™ PLA-CF is a high-quality PLA reinforced with carbon fiber designed for functional applications and smooth and matte surface finish.
Polymaker, PolyLite™ PLA-CFp. 2 - Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, PolyLite™ PLA-CFp. 4
Chemicals and environment (4)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, PolyLite™ PLA-CFp. 2: Effect of weak acids Not resistant - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, PolyLite™ PLA-CFp. 2: Effect of strong acids Not resistant - Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, Polylite™ PLA-CF Technical Data Sheetp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, Polylite™ PLA-CF Technical Data Sheetp. 1: Effect of strong acids Poor
CreatBot PLA-CFStrength XY, MPa41Strength Z, MPa34Modulus XY, GPa2.8Charpy notched, kJ/m²—HDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–65Chamber, °CnoneDrying, °C, h40–506–8 h
CreatBot PLA-CFCreatBot
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| CreatBot, Technical Data Sheet:CreatBot PLA-CF17 valuesThe same values also in CreatBot, PLA-CF.Unless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 2800 MPap. 1: Young's modulus XY ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2200 MPap. 1: Young's modulus Z ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 41 MPap. 1: Tensile strength XY ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 34 MPap. 1: Tensile strength Z ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 12.3 %p. 1: Elongation at break XY ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 7.6 %p. 1: Elongation at break Z ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 3000 MPap. 1: Bending modulus XY ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2600 MPap. 1: Bending modulus Z ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 82 MPap. 1: Bending strength XY ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 62 MPap. 1: Bending strength Z ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 30.1 kJ/m²p. 1: Impact strength XY ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 16.1 kJ/m²p. 1: Impact strength Z ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 57 ℃p. 1: Determination of ISO 75 , 0.45MPa temperature | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO 75 | in the median |
| Vicat softening temperature | 57 ℃p. 1: Vicat softening temperature ISO 306,GB/T 1633 | specimen not stated, ISO 306, GB/T 1633 | |
| Melting temperature | 160 ℃p. 1: Melting temperature DSC, 10℃/ min | specimen not stated, DSC | |
| Density | 1.24 g/cm3p. 1: Physical Properties Test method Data Density ISO1183 Saturated water absorption | specimen not stated, ISO 1183 | |
| Melt mass-flow rate | 23.5 g/10 minp. 1: Melt index 340℃,2.16 kgalso in CreatBot, PLA-CF | specimen not stated, no standard namedAs the sheet prints it: 340℃,2.16 kg | |
| CreatBot, PLA-CF1 value | |||
| Water absorption | 0.41%p. 1: Saturation Water Absorption | no standard namedAs the sheet prints it: RH=55% | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–65 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 40–50 °C for 6–8 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 190-230℃; Bed 45-65℃; Chamber OFF; Drying 40-50℃,6-8 HCreatBot, Technical Data Sheet:CreatBot PLA-CFp. 1: Recommended printing settings; p. 1: Pre-printing drying; p. 1: bed temperature; p. 1: Chamber temperature; p. 1: Print Bed Surface Treatment
- Nozzle 190-230℃; Bed 45-65℃; Chamber OFF; Drying 40-50℃,6-8 H (air blast drying oven)CreatBot, PLA-CFp. 1: Drying Conditions Before Printing; p. 1: Nozzle Temperature; p. 1: Nozzle Diameter; p. 1: Print Bed Surface Treatment; p. 1: Print Bed Temperature; p. 1: Chamber Temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Warping and shrinkage
Carbon fiber effectively reduces material shrinkage and warping, preventing deformation of large models and ensuring assembly accuracy.
CreatBot, PLA-CFp. 1
QIDI PLA-CFStrength XY, MPa54.9Strength Z, MPa24.1Modulus XY, GPa4.02Charpy notched, kJ/m²6.65HDT 0.45, °C55HDT 1.8, °C53Price, CAD/kg—Nozzle, °C210–240Bed, °C40–60Chamber, °CnoneDrying, °C, h504–6 h
QIDI PLA-CFQIDI
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| QIDI, Technical Data Sheet QIDI PLA-CF13 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 4020.55 ± 99.11 MPap. 2: 拉伸模量(X-Y) ISO 527 Young’s modulus(X-Y) | ISO 527 | in the median |
| Tensile modulus Z | 2953.14 ± 1.01 MPap. 2: 拉伸模量(Z) ISO 527 Young’s modulus (Z) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 54.92 ± 0.22 MPap. 2: 拉伸强度(X-Y) Tensile strength(X-Y) | no standard stated | in the median |
| Tensile strength (yield or break not stated) Z | 24.09 ± 1.40 MPap. 2: 拉伸强度 (Z) Tensile strength (Z) | no standard stated | in the median |
| Elongation at break XY | 4.90 ± 0.97 %p. 2: 断裂伸长率(X-Y) Elongation at break (X-Y) | no standard stated | in the median |
| Elongation at break Z | 1.01 ± 0.1 %p. 2: 断裂伸长率(Z) Elongation at break (Z) | no standard stated | in the median |
| Flexural modulus XY | 4197.66 ± 279.96 MPap. 2: 弯曲模量 (X-Y) Bending modulus (X-Y) | no standard stated | in the median |
| Flexural strength XY | 91.57 ± 0.31 MPap. 2: 弯曲强度(X-Y) Bending strength (X-Y) | no standard stated | in the median |
| Charpy impact strength XY | 6.65 ± 0.38 KJ/㎡p. 2: Charpy impact strength ISO 179 | ISO 179notched | in the median |
| HDT at 0.45 MPa | 55.2 °Cp. 1: 热变形温度 | no standard namedAs the sheet prints it: 0.45 MPa | in the median |
| HDT at 1.8 MPa | 52.6 °Cp. 1: Determination of temperature | no standard namedAs the sheet prints it: 1.80 MPa | in the median |
| Melting temperature | 163 °Cp. 1: 熔点 ISO 11357 Melting Temperature | specimen not stated, ISO 11357 | |
| Density | 1.25 g/cm³p. 1: 密度 ISO 1183 Density | specimen not stated, ISO 1183 | |
| QIDI, QIDI Filament Guide | Choose the Right Filament1 value | |||
| Water absorption | 0.3%p. 1: Saturated Water Absorption Rate | no standard statedafter moisture conditioningsaturation | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 4–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): drying in QIDI, QIDI Filament Guide | Choose the Right Filament.
Its 2 print profiles, in the documents' words
- Nozzle 210-240 °C; Bed 40-60°C; Drying After the material is damp, there will be more printing ozzing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 50°C for 4-6h to restore the printing quality of QIDI PLA-CF.QIDI, Technical Data Sheet QIDI PLA-CFp. 3: Drying note; p. 2: Nozzle Temperature; p. 2: Build plate temperature; p. 2: Recommended Nozzle Diameter; p. 2: Recommended build surface treatment
- Nozzle 210-240°C; Drying Required; Blast Drying Oven: 50°C / 4-6 hQIDI, QIDI Filament Guide | Choose the Right Filamentp. 1: Is drying highly recommended?; p. 1: Recommended hardware settings; p. 1: Extruder heat range
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Nozzle wear
Phaetus hardened steel and above grade nozzles shall be selected, which can effectively improve the print quality.
QIDI, Technical Data Sheet QIDI PLA-CFp. 3 - Moisture sensitivity
Blast Drying Oven: 50°C / 4-6 h
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1 - Nozzle wear
0.4–0.8 mm / Hardened steel nozzle or harder
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1 - Printing advice
70-80°C / 4-6 h (optional; support parts to limit warping)
QIDI, QIDI Filament Guide | Choose the Right Filamentp. 1
Eryone PLA-CFStrength XY, MPa43.5Strength Z, MPa25.3Modulus XY, GPa1.73Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C60–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone PLA-CFEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) PLA-CF15 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 1732.7 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 1352.1 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 43.5 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 25.3 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 4.5 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z (X-Z) | 3.1 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 5513.7 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 67.5 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Charpy impact strength orientation not stated | 4.75 kJ/m2p. 2: Charpy Impact strenght | GB/T 1843As the sheet prints it: GB/T 1843; energy=2.75J | not in the median: notch not stated |
| Impact strength, test unclear | 4.75 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843print settingsprinting temperature=220° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | listed under other properties |
| HDT at 0.45 MPa | 54 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 63 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | specimen not stated, DSCAs the sheet prints it: ° C DSC | in the median |
| Vicat softening temperature | 69 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.24 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 3.7 ± 0.6 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
| Eryone, Carbon Fiber PLA (Eryone)1 value | |||
| Fibre content | 15%p. 1: Carbon Fiber Content | no standard stated | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190℃-220℃; Bed 60-70℃; Drying 50℃-60℃,6hEryone, Technical Data Sheet (TDS) PLA-CFp. 1: Recommended printing settings; p. 1: Drying conditions; p. 1: Sealed printing; p. 1: Bed material
- Nozzle 190-220ºC; Bed 60-70ºCEryone, Carbon Fiber PLA (Eryone)p. 1: Extruder temperature; p. 1: Platform temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Benefits
Compared to regular PLA, it exhibits superior strength and stiffness
Eryone, Technical Data Sheet (TDS) PLA-CFp. 1 - Warping and shrinkage
low shrinkage, and reduced warping
Eryone, Technical Data Sheet (TDS) PLA-CFp. 1 - Printing advice
Sealed printing Supports open printing, and the sealing effect is better.
Eryone, Technical Data Sheet (TDS) PLA-CFp. 1
Extrudr PLA BASIC CFStrength XY, MPa60Strength Z, MPa—Modulus XY, GPa5.6Charpy notched, kJ/m²5HDT 0.45, °C61HDT 1.8, °C57Price, CAD/kg—Nozzle, °C200–230Bed, °C20–60Chamber, °CnoneDrying, °C, h506 h
Extrudr PLA BASIC CFExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, PLA Basic CF – Carbon Fiber PLA for Technical Prints | Extrudr21 values | |||
| Tensile modulus orientation not stated | 5600 MPap. 1: Tensile modulus (Young's modulus) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 55 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 55 MPap. 1: Tensile stress at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 3 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 4800 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 100 MPap. 1: Flexural strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 5 kJ/m²p. 1: Charpy notched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 3 kJ/m²p. 1: Charpy notched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: tested below room temperature |
| Charpy impact strength orientation not stated | 12 kJ/m²p. 1: Charpy unnotched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: unnotched |
| Charpy impact strength orientation not stated | 10 kJ/m²p. 1: Charpy unnotched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: unnotched |
| HDT at 0.45 MPa | 61 °Cp. 1: Heat deflection temp. (HDT/B) — 0.45 MPa | ISO 75As the sheet prints it: ISO 75-1; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 57 °Cp. 1: Heat deflection temp. (HDT/A) — 1.8 MPa | ISO 75As the sheet prints it: ISO 75-1; 1.8 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 60 °Cp. 1: Glass transition temp. (Tg) | ISO 11357As the sheet prints it: ISO 11357-1 (DSC) | in the median |
| Vicat softening temperature | 60 °Cp. 1: Vicat softening temp. (VST/B50) | ISO 306 | |
| Melting temperature | 155 °Cp. 1: Melting point (Tm) | ISO 3146As the sheet prints it: ISO 3146-C | |
| Decomposition temperature | 240 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Density | 1.26 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Water absorption | 0.7 %p. 1: Water absorption (saturation, 23°C) | no standard namedAs the sheet prints it: state=saturation | |
| Melt mass-flow rate | 5 g/10 minp. 1: Melt flow rate (MFR) — 210°C/2.16 kg | ISO 1133As the sheet prints it: ISO 1133-1 (210°C/2.16 kg); temp/load=210°C/2.16 kg | |
| Melt volume-flow rate | 22 cm³/10 minp. 1: Melt volume rate (MVR) — 235°C/5.0 kg | no standard namedAs the sheet prints it: temp/load=235°C/5.0 kg | |
| Mould shrinkage orientation not stated | 0.2 %p. 1: Mould shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, TECHNISCHES DATENBLATT PLA BASIC CF9 values | |||
| Tensile modulus | 500 (3,5) MPaphysically implausiblep. 1: Zug E-Modul | ASTM D882 | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) | 53 MPaphysically implausiblep. 1: Reißfestigkeit | ASTM D882 | not in the median: physically implausible as published |
| Tensile break strength | 60 MPaphysically implausiblep. 1: Bruchspannung | ASTM D882 | not in the median: physically implausible as published |
| Elongation at break | 6 %p. 1: Nominelle Bruchdehnung | ASTM D882 | not in the median: measured on a moulded bar |
| HDT | 55 °Cp. 1: HDT ASTM E2092 °C | ASTM E2092As the sheet prints it: E2092 | not in the median: measured on a moulded bar |
| Melting temperature | 180-200 °Cp. 1: Schmelztemperatur | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1,24 g/cm³p. 1: Dichte ASTM D792 g/cm³ | ASTM D792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR ASTM D1238 g/10min | ASTM D1238 | |
| Mould shrinkage orientation not stated | 0,4 %p. 1: Schwindung ASTM D955 % | ASTM D955 | |
| Extrudr, TECHNICAL DATA SHEET PLA BASIC CF3 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile strength (yield or break not stated) orientation not stated | 53 MPap. 1: Tensile strength | ASTM D882 | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 60 MPap. 1: Stress at break | ASTM D882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6 %p. 1: Nominal elongation at break | ASTM D882 | not in the median: set apart (never used to pass), test bar not described as printed |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 200-230°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1: Recommended printing settings; p. 1: Note on nozzle diameter
- Nozzle 200–230 °C; Bed 20–60 °C; Drying Drying temperature 50 °C; Drying time 0–6 hExtrudr, PLA Basic CF – Carbon Fiber PLA for Technical Prints | Extrudrp. 1: Print Settings, Drying (drying only; p. 1: Surface preparation; p. 1: Recommended settings for printers with a 0.4 mm nozzle
- Nozzle 200-230°C; Bed 20-60°CExtrudr, TECHNISCHES DATENBLATT PLA BASIC CFp. 1: Düse; p. 1: Heizbett; p. 1: Hinweise
Price
Not in the price sample.
Its 4 documents
What the maker says (10)
- Good for
At the same time, it remains just as easy to print as regular PLA, making it ideal for functional parts, design projects, and everyday prototyping.
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Benefits
Easy to print – even without a heated bed
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Benefits
Increased stiffness and dimensional stability due to carbon fiber
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Benefits
PLA Basic CF combines the user-friendly nature of PLA with the enhanced stiffness and technical appearance of carbon fiber reinforcement.
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Warping and shrinkage
Shrinking ASTM D955 % 0,4
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Warping and shrinkage
No warping, no shrinkage
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Surface finish
Thanks to the carbon fiber content, PLA Basic CF offers significantly higher rigidity and a matte, premium finish with a technical feel.
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Surface finish
Matte, professional surface with a technical look
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Nozzle wear
Hardened Nozzle yes
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1 - Nozzle wear
Note: As with all carbon fiber-reinforced materials, we recommend using a hardened nozzle (e.g., hardened steel or ruby nozzle).
Extrudr, TECHNICAL DATA SHEET PLA BASIC CFp. 1
SUNLU PLA Carbon FiberStrength XY, MPa44Strength Z, MPa—Modulus XY, GPa3.53Charpy notched, kJ/m²3.5IzodHDT 0.45, °C56HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–245Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA Carbon FiberSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information PLA Carbon Fiber13 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO PLA Carbon Fiber. | |||
| Tensile modulus orientation not stated | 3530 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 44.8 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 4.1 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 2432 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 64 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Izod impact strength | 32 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: another value of this product is in it |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃also in SUNLU, TECHNICAL DATA SHEET ISO PLA Carbon Fiber | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 168.6 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO PLA Carbon Fiber | ASTM D7426 | |
| Decomposition temperature | 367.7 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.2 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 7 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.3-1.1 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
| SUNLU, TECHNICAL DATA SHEET ISO PLA Carbon Fiber11 valuesThe same values also in SUNLU, Product Information PLA Carbon Fiber.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 44 ± 5 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 10.4 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 3221 ± 200 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 79 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 3.5 ± 1.5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 5.5 ± 2 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 45 mm/s; Printing temperature 230 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 84 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | |
| HDT XY, at 0.45 MPa | 55.5 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 59 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, Product Information PLA Carbon Fiber | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Density | 1.23 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 20.4 ± 3 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
Print settings
- Nozzle
- 215–245 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 215-225; 225-245; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA Carbon Fiberp. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 215-225℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Carbon Fiberp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Room Temp.; p. 2: Print Platform Material
- Nozzle 225-245℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Carbon Fiberp. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s; p. 2: Print Platform Material
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
Contains carbon fiber, offering lightweight properties and high strength.
SUNLU, TECHNICAL DATA SHEET ISO PLA Carbon Fiberp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA Carbon Fiberp. 2 - Benefits
Contains fiber materials with light weight and high strength.
SUNLU, Product Information PLA Carbon Fiberp. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information PLA Carbon Fiberp. 2
3DXTECH CarbonX CF-PLAStrength XY, MPa48Strength Z, MPa—Modulus XY, GPa4.95Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C23–60Chamber, °CnoneDrying, °C, h654 h
3DXTECH CarbonX CF-PLA3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: CarbonX™ CF-PLA 3D Printing Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 215°C Bed Temp: 23°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 4950 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 48 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 2 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 6320 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 89 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 91 °Cphysically implausiblep. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66psi) | not in the median: physically implausible as published |
| Glass transition temperature | 60 °Cp. 1: Glass Transition Temperature (Tg) DSC °C | DSCAs the sheet prints it: Tg DSC °C | in the median |
| Density | 1.29 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
| 3DXTECH, CarbonX CF-PLA safety data sheet1 value | |||
| Fibre content | <20 %p. 1: Carbon Fiber | no standard stated | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 23–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: CarbonX™ CF-PLA 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
- Nozzle 190-220 C; Bed 23-60 C; Chamber Not Required; Drying 65C for 4 hours3DXTECH, CARBONX™ PLA+CFp. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Benefits
Carbon fiber reinforcement increases stiffness and dimensional stability
3DXTECH, CARBONX™ PLA+CFp. 1
SIDDAMENT PLA Carbon FiberStrength XY, MPa44.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4.1IzodHDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h
SIDDAMENT PLA Carbon FiberSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PLA Carbon Fiber - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 44.8 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 4.1 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2432 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 64 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 4.1 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 53 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.22 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2–4 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-220°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, PLA Carbon Fiber - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PLA Carbon Fiber - Technical Datasheetp. 2
Flashforge PLACF10Strength XY, MPa40Strength Z, MPa—Modulus XY, GPa1.1Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C30–60Chamber, °C25–40Drying, °C, h60≥ 5 h
Flashforge PLACF10Flashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PLACF10 Filament11 values | |||
| Tensile modulus XY | 1100-1300 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Tensile strength (yield or break not stated) XY | 40-45 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Elongation at break XY | 11.5-13.5 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Flexural strength XY | 85-95 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Izod impact strength XY | 8.5-9.5 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2 | ISO 180as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | not in the median: notch not stated |
| HDT at 0.45 MPa | 60 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 55 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.26-1.27 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.5 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 10-15 g/10minp. 1: Melt Index MFR (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 190℃/2.16Kg ISO 1133 | |
| Fibre content | 10% carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- 60 °C for ≥ 5 hown data sheet
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200~230℃ (210℃ recommended); Bed 30~60℃ (50℃ recommended); Chamber Room temperature~40℃; Drying Using a hot dry air oven at 60℃ for at least 5 hours is recommendedFlashforge, Technical Data Sheet PLACF10 Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 3: Drying note; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
PLACF10 has excellent dimensional stability, bending strength and rigidity, and is as easy to print as PLA filament.
Flashforge, Technical Data Sheet PLACF10 Filamentp. 1 - Benefits
Dimensional stability/High strength/High rigidity.
Flashforge, Technical Data Sheet PLACF10 Filamentp. 1 - Supports and removal
Recommended Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet PLACF10 Filamentp. 2 - Moisture sensitivity
Because of the addition of carbon fiber, PLACF10 filament absorbs moisture more easily than PLA filament, so it should be dried before being used.
Flashforge, Technical Data Sheet PLACF10 Filamentp. 3 - Printing advice
After the printing process, it is recommended to dry the model in an oven at 60°C for 1-3 hours in order to increase the strength of the model.
Flashforge, Technical Data Sheet PLACF10 Filamentp. 3
Chemicals and environment (1)
- Post-processing: described in words
After the printing process, it is recommended to dry the model in an oven at 60°C for 1-3 hours in order to increase the strength of the model.
Flashforge, Technical Data Sheet PLACF10 Filamentp. 3: Post-processing note
3DJake ecoPLA CFStrength XY, MPa55Strength Z, MPa—Modulus XY, GPa4.3Charpy notched, kJ/m²5HDT 0.45, °C65HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C20–60Chamber, °CnoneDrying, °C, h558 h
3DJake ecoPLA CF3DJake
Sold as toughened or impact-modified: "Tougher and less brittle than conventional PLA" (3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 g, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE ecoPLA CF7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 4300 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 55 MPap. 1: Tensile strength | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3,5 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 5 kJ/m²p. 1: Notched impact strength | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 65 °Cp. 1: HDT (0,45 MPa, “B”) | ISO 75As the sheet prints it: 0,45 MPa ISO 75-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1,26 g/cm³p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1/A | |
| Melt mass-flow rate | 5 g/10 minp. 1: MFR (210 °C/2,16 kg) | ISO 1133As the sheet prints it: 210 °C/2 16 kg ISO 1133-A | |
| 3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 g1 value | |||
| Fibre content | 5% carbon fibrep. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 210 – 240 °C; Bed 20 – 60 °C3DJake, Technical Data Sheet 3DJAKE ecoPLA CFp. 1: Recommended printing settings; p. 1: Heated bed
- Nozzle 210 - 240 °C; Bed 20 - 60 °C3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1: Recommended processing temperature; p. 1: Recommended heating temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (15)
- Warping and shrinkage
Minimal warping, even on large models
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Surface finish
Matt, technical surface
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Warping and shrinkage
Minimal shrinkage
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Benefits
Easy to print
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Benefits
The result is a filament that combines the easy printability of PLA with more dimensional stability, precision print results and an elegant matte finish.
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Benefits
It also exhibits better bridging properties, which ensures clean results, especially with more complex geometries.
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Good for
This makes ecoPLA CF the perfect choice for frequent printers seeking reliable results with a professional look.
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Warping and shrinkage
Carbon fibre reinforced (5%) – reduced deformation, and a matte, technical surface
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Benefits
Better bridging properties for cleaner bridging
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Warping and shrinkage
Minimal shrinkage for highly accurate prints
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Precision and tolerance
High dimensional precision thanks to exact diameter and roundness tolerances
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Odour and emissions
Odourless printing
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Benefits
Easy to process and consistent in performance
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Benefits
Tougher and less brittle than conventional PLA
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1 - Good for
This makes ecoPLA CF the ideal filament for functional prototypes, decorative models, and robust everyday components that are not only strong but also visually refined.
3DJake, 3DJAKE ecoPLA CF Dark Grey, 1.75 mm / 1000 gp. 1
Creality Hyper PLA-CFStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °C0–50Drying, °C, h558 h
Creality Hyper PLA-CFCreality
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Creality, Hyper-PLA+ Filament Technical Data Sheet9 values | |||
| Tensile strength (yield or break not stated) XY | 39 MPap. 1: Tensile strength (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 4.27 %p. 1: Elongation at break(X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 5003 MPap. 1: Bending modulus(X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | in the median |
| Flexural strength XY | 103 MPap. 1: Bending strength(X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength Z | 5.08 kJ/m2p. 1: Charpy impact strength(Z) ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Vicat softening temperature | 53 °Cp. 1: Vicat Softening temperature | no standard stated | |
| Density | 1.21 ± 0.1 g/cm3p. 1: Density | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: ASTM D792 (ISO 1183, GB/T 1033) | |
| Melt mass-flow rate | 5.37 g/10 minp. 1: Melt index 190°C, 2.16 kg | no standard namedAs the sheet prints it: 190°C 2.16 kg | |
| Fibre content | 4% carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- 0–50 °Cown data sheet
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 - 230℃; Bed 45-60℃; Chamber 0-50℃Creality, Hyper-PLA+ Filament Technical Data Sheetp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
HYPER PLA CF is filled with 4% carbon fiber material, which has the advantages of high-speed printing and high strength.
Creality, Hyper-PLA+ Filament Technical Data Sheetp. 1 - Surface finish
The carbon fiber texture gives the work a unique and modern appearance, making it visually distinctive.
Creality, Hyper-PLA+ Filament Technical Data Sheetp. 1 - Supports and removal
The support structure is strong to ensure the stability of the printing process, and it is easy to remove, ensuring the exquisiteness and smoothness of the finished product.
Creality, Hyper-PLA+ Filament Technical Data Sheetp. 1
Spectrum PLA CarbonStrength XY, MPa65Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²8HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C0–45Chamber, °CnoneDrying, °C, h558 h
Spectrum PLA CarbonSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Carbon8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 12500 MPaphysically implausiblep. 1: Elastic modulus | ISO 527 | not in the median: physically implausible as published |
| Tensile break strength orientation not stated | 65 MPap. 1: Tensile strength at break (3D printing) * | printed specimen, ISO 527 | in the median |
| Elongation at break orientation not stated | 0.5 %p. 1: Tensile elongation at break (3D printing) * | printed specimen, ISO 527 | in the median |
| Charpy impact strength orientation not stated | 55 kJ/m²p. 1: Charpy impact strength Unnotched, at +23°C | ISO 179As the sheet prints it: ISO 179-1eU; specimen size=80x10x4 mm | not in the median: unnotched |
| Charpy impact strength orientation not stated | 8 kJ/m²p. 1: Charpy impact strength Notched, at +23°C | ISO 179As the sheet prints it: ISO 179-1eA; specimen size=80x10x4 mm | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 60 °Cp. 1: VICAT softening point | no standard stated | |
| Density | 1.30 g/cm³p. 1: Density | ISO 1183 | |
| Fibre content | 10% addition of carbon fibrep. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 190-220°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Carbonp. 1: Recommended printing settings; p. 1: settings footnote
- Nozzle 190-220 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Closed chamber for printing; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
Not in the price sample.
Its 4 documents
What the maker says (8)
- Benefits
improved abrasion resistance
Spectrum, TECHNICAL DATA SHEET PLA Carbonp. 1 - Benefits
Spectrum Carbon PLA is a modified, PLA-based filament blended with carbon fibers which contributes to a considerably higher rigidity, hardness and tensile resistance, while retaining low shrinkage and very good adhesion to build platforms typical for the pure PLA.
Spectrum, TECHNICAL DATA SHEET PLA Carbonp. 1 - Benefits
much higher compression resistance
Spectrum, TECHNICAL DATA SHEET PLA Carbonp. 1 - Surface finish
high aesthetic, matte surface quality
Spectrum, TECHNICAL DATA SHEET PLA Carbonp. 1 - Surface finish
The 10% addition of carbon fibre enables to obtain matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.
Spectrum, TECHNICAL DATA SHEET PLA Carbonp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Carbonp. 1 - Nozzle wear
Ruby or hardened nozzle recommended
Spectrum, TECHNICAL DATA SHEET PLA Carbonp. 1 - Benefits
10% Carbon fiber reinforced, improved hardness & rigidity
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Spectrum THE FILAMENT PLA CFStrength XY, MPa57.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C35–45Chamber, °CnoneDrying, °C, h558 h
Spectrum THE FILAMENT PLA CFSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA CF8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 57.5 MPap. 1: Tensile Strength at Yield | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 14.2 MPap. 1: Tensile Strength at Break | ISO 527 | not in the median: another value of this product is in it |
| Charpy impact strength orientation not stated | 3.6 kJ/m²p. 1: Impack strength - Charpy method | ISO 179 | not in the median: notch not stated |
| HDT | 55 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E 2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 60 °Cp. 1: Glass Transition Temperature | ASTM D3418As the sheet prints it: D3418 | in the median |
| Density | 1.25 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 4 g/10minp. 1: MFR | ASTM D1238As the sheet prints it: D 1238 | |
| Fibre content | 3% CFp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 200-230°C; Bed 35-45°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA CFp. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: settings are based on a 0,4 mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
3% CF for durability and flexibility; optimized formula; beginner-friendly
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA CFp. 1 - Surface finish
Surface finish matte, carbon appearance
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA CFp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA CFp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: Yes
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA CFp. 1
Nobufil PLAx CFStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–235Bed, °C55–75Chamber, °CnoneDrying, °C, h503–6 h
Nobufil PLAx CFNobufil
Sold as toughened or impact-modified: "Due to its impact modification PLAx CF offers increased tear and break resistance similar to ABS while maintaining the typical printing properties known from PLA." (Nobufil, Technical Datasheet PLAx CF, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nobufil, Technical Datasheet PLAx CF13 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 1: Tensile strength, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strength (yield or break not stated) orientation not stated | 52 MPap. 1: Tensile strength, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 7 %p. 1: Elongation at break, FDM H | ISO 527print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Elongation at break orientation not stated | 8 %p. 1: Elongation at break, Injection | ISO 527print settingsInjection column | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 4200 MPap. 1: Flexural modulus | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 92 MPap. 1: Flexural strength | ISO 178 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 4 kJ/m²p. 1: Izod Impact strength notched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: set apart (never used to pass), no stated orientation |
| Izod impact strength orientation not stated | 4,5 kJ/m²p. 1: Izod Impact strength notched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 17 kJ/m²p. 1: Izod Impact strength unnotched, FDM H | ISO 180print settingsFDM H column (the sheet does not say what H is) | not in the median: unnotched |
| Izod impact strength orientation not stated | 28 kJ/m²p. 1: Izod Impact strength unnotched, Injection | ISO 180print settingsInjection column | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 54 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Density | 1,19 g/cm³p. 1: Density | ISO 1183 | |
| Fibre content | 10% carbon fiberp. 1: Fibre content | no standard stated | |
Print settings
- Nozzle
- 215–235 °Cown data sheet
- Bed
- 55–75 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 3–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 225°C ± 10; Bed 65°C ± 10; Drying Pre-dry material for 3-6 hours at 50°C (max.).Nobufil, Technical Datasheet PLAx CFp. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Due to its impact modification PLAx CF offers increased tear and break resistance similar to ABS while maintaining the typical printing properties known from PLA.
Nobufil, Technical Datasheet PLAx CFp. 1 - Nozzle wear
Nozzle hardened
Nobufil, Technical Datasheet PLAx CFp. 1
iSANMATE PLA CFStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C30–65Chamber, °CnoneDrying, °C, h558 h
iSANMATE PLA CFiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, iSANMATE PLA CF9 valuesUnless a row says otherwise: moulded bar (resin supplier's value)dry | |||
| Tensile modulus orientation not stated | 25 GPap. 1: 拉伸模量/Modulus of Elasticity dry, @1 mm/min ISO 527 ISO 3167 A GPa | ISO 527, ISO 3167As the sheet prints it: 1 mm/min A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) orientation not stated | 120 MPap. 1: 拉伸强度/Tensile Strength | ISO 527, ISO 3167As the sheet prints it: ISO 527; rate=50 mm/min; specimen type column=ISO 3167 A | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 0,6 %p. 1: 断裂伸长率/Elongation dry, @50mm/min ISO 527 ISO 3167 A % | ISO 527, ISO 3167As the sheet prints it: 50mm/min A ISO 527 ISO 3167 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 25 GPap. 1: 弯曲模量/Flexural Modulus dry, @2 mm/min ISO 178 ISO 3167 A GPa | ISO 178, ISO 3167As the sheet prints it: 2 mm/min A ISO 178 ISO 3167 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 200 MPap. 1: 弯曲强度/Flexural Strength dry, @10mm/min ISO 178 ISO 3167 A MPa | ISO 178, ISO 3167As the sheet prints it: 10mm/min A ISO 178 ISO 3167 | not in the median: measured on a moulded bar |
| Charpy impact strength | 13 kJ/m2p. 1: 简支梁冲击强度/ dry ISO 179 1eU 80x10x4mm kJ/m2 Charpy Impact Strength | specimen not stated, ISO 179As the sheet prints it: 1eU 80x10x4mm ISO 179 | not in the median: unnotched |
| Charpy impact strength | 3 kJ/m2p. 1: 简支梁缺口冲击强度/ dry ISO 179 1eA 80x10x4mm kJ/m2 Charpy Impact Strength notched | specimen not stated, ISO 179As the sheet prints it: 1eA 80x10x4mm ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1,42 g/cm3p. 1: 密度/Specific Gravity ISO 1183 g/cm3 | specimen not stated, ISO 1183moisture state not stated | |
| Water absorption | 0,1 %p. 1: 吸水率/Water Absorption 23°C / 24h ISO 62 ISO 3167 A % | ISO 62, ISO 3167As the sheet prints it: 23°C / 24h A ISO 62 ISO 3167 | |
Print settings
- Nozzle
- 210–240 °CBambu Lab Filament Guide
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededBambu Lab Filament Guide
What the maker says (2)
- Benefits
high stiffness.
iSANMATE, iSANMATE PLA CFp. 1 - Moisture sensitivity
Low water absorption
iSANMATE, iSANMATE PLA CFp. 1
eSUN ePLA CFStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg40Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h558 h
eSUN ePLA CFeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePLA-CF Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 39 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 4.27 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 5003 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 103 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 5.08 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | not in the median: measured on a moulded bar |
| Density | 1.21 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
| eSUN, ePLA-CF Filament safety data sheet1 value | |||
| Fibre content | 15-20 %p. 1: carbon fibre | no standard stated | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 45-60°CeSUN, ePLA-CF Technical Data Sheetp. 2: Recommended printing settings; p. 2: Footnote
Price
40 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 40 CAD/kgeSun ePLA-CF Filament Black 1.75mm - 1kg (SKU ESUN-EPLA-CF-1.75MM-1KG)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (4)
- Good for
machine • robot
eSUN, ePLA-CF Technical Data Sheetp. 1 - Benefits
Excellent printability
eSUN, ePLA-CF Technical Data Sheetp. 1 - Benefits
Its printing performance is exceptional, making it suitable for high-speed printing.
eSUN, ePLA-CF Technical Data Sheetp. 1 - Surface finish
The addition of carbon fibers not only reinforces the PLA but also provides it with a matte appearance and a distinctive carbon fiber sandblasted texture.
eSUN, ePLA-CF Technical Data Sheetp. 1
Protopasta Carbon Fiber Composite HTPLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205Bed, °C60Chamber, °CnoneDrying, °C, h558 h
Protopasta Carbon Fiber Composite HTPLAProtopasta
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev 1. Carbon Fiber Composite HTPLA2 valuesUnless a row says otherwise: specimen not stated | |||
| Density | 1.3 g/ccp. 1: Density approx. | no standard stated | |
| Fibre content | 10% by weightp. 1: Additives | no standard stated | |
Print settings
- Nozzle
- 205 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle [°C] 205; Bed [°C] 60Protopasta, Technical Data Sheet Rev 1. Carbon Fiber Composite HTPLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
HTPLA is a semi-crystalline grade of PLA optimized for heat-treating for higher temperature use.
Protopasta, Technical Data Sheet Rev 1. Carbon Fiber Composite HTPLAp. 1 - Benefits
Resulting 3D printed prototypes and end-use parts are characterized by exceptional stability of form and potential use up to 155 deg C (310 deg F) when heat treated.
Protopasta, Technical Data Sheet Rev 1. Carbon Fiber Composite HTPLAp. 1 - Warping and shrinkage
Prior to printing, HTPLA parts should be scaled in the slicer to compensate for shrinkage when heat treating.
Protopasta, Technical Data Sheet Rev 1. Carbon Fiber Composite HTPLAp. 1 - Warping and shrinkage
Scale Values (x/y-axis) 100.6% Scale Values (z-axis) 99%
Protopasta, Technical Data Sheet Rev 1. Carbon Fiber Composite HTPLAp. 1 - Odour and emissions
Characteristics low odor, non-toxic, renewably sourced
Protopasta, Technical Data Sheet Rev 1. Carbon Fiber Composite HTPLAp. 1
Protopasta Original Carbon Fiber Composite PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205Bed, °C60Chamber, °CnoneDrying, °C, h558 h
Protopasta Original Carbon Fiber Composite PLAProtopasta
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev 1. Original Carbon Fiber Composite PLA2 valuesUnless a row says otherwise: specimen not stated | |||
| Density | 1.3 g/ccp. 1: Density approx. | no standard stated | |
| Fibre content | 10% by weightp. 1: Additives | no standard stated | |
Print settings
- Nozzle
- 205 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 55 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle [°C] 205; Bed [°C] 60Protopasta, Technical Data Sheet Rev 1. Original Carbon Fiber Composite PLAp. 1: Recommended printing settings; p. 1: Description
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- MakerWiz: 100 per kg, sale priceProto-Pasta Original Carbon Fiber PLA Composite (500 g) / 1.75 mm (SKU 23000012)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 2 documents
What the maker says (5)
- Benefits
Resulting 3D printed prototypes and end-use parts are characterized by exceptional stability of form.
Protopasta, Technical Data Sheet Rev 1. Original Carbon Fiber Composite PLAp. 1 - Precision and tolerance
Max particle size 0.15 mm (may limit resolution)
Protopasta, Technical Data Sheet Rev 1. Original Carbon Fiber Composite PLAp. 1 - Adhesion between layers
Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts.
Protopasta, Technical Data Sheet Rev 1. Original Carbon Fiber Composite PLAp. 1 - Nozzle wear
This filament is slightly more abrasive than standard PLA.
Protopasta, Technical Data Sheet Rev 1. Original Carbon Fiber Composite PLAp. 1 - Odour and emissions
Characteristics low odor, non-toxic, renewably-sourced
Protopasta, Technical Data Sheet Rev 1. Original Carbon Fiber Composite PLAp. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.