PLA Glow
7 products from 6 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
7 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- hardened nozzle
- not published
How the numbers are worked out
Bambu Lab PLA GlowStrength XY, MPa32Strength Z, MPa26Modulus XY, GPa2.03Charpy notched, kJ/m²8.8HDT 0.45, °C55HDT 1.8, °C52Price, CAD/kg32Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA GlowBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Glow21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s Infill Density 100% * All the specimens were annealed and dried at 55 °C for 8 h before testing. And the suggested annealing temperature of models printed with Bambu PLA Glow is 50 to 60 °C, and the time is 6 to 12 hours. The annealing effect depends on the annea | |||
| Tensile modulus XY | 2030 ± 210 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1750 ± 180 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 32 ± 3 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 26 ± 3 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 8.6 ± 1.2 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 6.5 ± 0.8 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2640 ± 130 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2230 ± 110 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 76 ± 4 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 55 ± 3 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 27.3 ± 2.2 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 8.8 ± 1.7 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 19.8 ± 1.8 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 55 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 52 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 55 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 56 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 155 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.26 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.46 %p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: te 25 °C, 55% RH | |
| Melt mass-flow rate | 23.3 ± 2.4 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA GlowRecommended printing settings
Price
32 CAD/kgits one regular price in the sample
1 listing
- Bambu Lab Canada: 32 CAD/kgPLA Glow - Glow Orange (15300) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
Its 2 documents
What the maker says (5)
- Good for
This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Glowp. 1 - Benefits
This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Glowp. 1 - Benefits
What sets PLA Glow apart is its distinctive feature—it glows in the dark.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Glowp. 1 - Supports and removal
Support Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Glowp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Glowp. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GlowTest specimen preparation
Chemicals and environment (7)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GlowSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GlowResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GlowResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GlowResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GlowResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GlowFlammability - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Glow is 50 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Glowp. 3: Annealing note
Eryone Glow in the dark PLAStrength XY, MPa43.2Strength Z, MPa25.6Modulus XY, GPa1.99Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Glow in the dark PLAEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Eryone, Technical Data Sheet (TDS) Glow in the dark PLA12 valuesUnless a row says otherwise: printed specimenprint settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | |||
| Tensile modulus XY | 1987.2 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile modulus Z (X-Z) | 1851.7 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile strength (yield or break not stated) XY | 43.2 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 25.6 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843 | in the median |
| Elongation at break XY | 1.7 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Elongation at break Z (X-Z) | 1.4 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Flexural modulus orientation not stated | 2987.7 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Flexural strength orientation not stated | 72.3 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Impact strength, test unclear | 3.5 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843 | listed under other properties |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633print settings not stated | |
| Density | 1.25 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 180–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 180℃-220℃; Bed 55-70℃; Drying 50℃-60℃,6hEryone, Technical Data Sheet (TDS) Glow in the dark PLAp. 1: Recommended printing settings; p. 1: Drying conditions; p. 1: Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Good for
not only suitable for signage but also for printing toys and decorations
Eryone, Technical Data Sheet (TDS) Glow in the dark PLAp. 1
Spectrum PLA Glow in the DarkStrength XY, MPa60Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C185–225Bed, °C0–45Chamber, °CnoneDrying, °C, h454 h
Spectrum PLA Glow in the DarkSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Glow in the Dark9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3.5 Gpap. 1: Tensile Modulus | ASTM D882As the sheet prints it: D 882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Yield Strength | ASTM D882As the sheet prints it: D 882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength at Break | ASTM D882As the sheet prints it: D 882 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 6,00%p. 1: Tensile Elongation | ASTM D882As the sheet prints it: D 882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3.8 MPaphysically implausiblep. 1: Flexural Modulus | ASTM D790As the sheet prints it: D790 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 83 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | 16 J/mp. 1: Notched Izod Impact | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| Glass transition temperature | 55-60°Cp. 1: Glass Transition Temperature | ASTM D3418As the sheet prints it: D3418 | in the median |
| Melt mass-flow rate | 6 g/10minp. 1: MFR (210°C 2.16kg) | ASTM D1238As the sheet prints it: D 1238; 2.16kg | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO2 valuesUnless a row says otherwise: specimen not stated | |||
| HDT | 55°Cp. 4: HDT | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm³p. 4: Density [g/cm³] | no standard stated | |
Print settings
- Nozzle
- 185–225 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 45 °C for 4 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): hardened nozzle in Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO, Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29.
Its 4 print profiles, in the documents' words
- Nozzle 185-225°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1: Nozzle temperature, Closed chamber, Ruby or hardened nozzle; p. 1: Bed temperature; p. 1: Dry box
- Nozzle 185-225 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Closed chamber for printing; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Drying 45°C, 4h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
Not in the price sample.
Its 5 documents
What the maker says (9)
- Benefits
The material has all the typical characteristics of the pure PLA – the added pigment has a neutral impact on the material’s properties.
Spectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1 - Benefits
unbelievably strong after-glow effect
Spectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1 - Warping and shrinkage
warp-free printing
Spectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1 - Surface finish
high aesthetic surface quality
Spectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1 - Adhesion between layers
perfect layer adhesion
Spectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1 - Nozzle wear
Ruby or hardened nozzle recommended
Spectrum, TECHNICAL DATA SHEET PLA Glow in the Darkp. 1 - Benefits
Strong phosphorescence effect, smooth surface after printing
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Surface finish
smooth surface after printing
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
SUNLU PLA Glow In The DarkStrength XY, MPa49Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–215Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA Glow In The DarkSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information PLA Glow In The Dark11 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 49 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 21 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2155 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 79 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 31 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 62 ℃p. 1: Glass Transition(Tg) ASTM D7426 10℃/min ℃ | ASTM D7426 | in the median |
| Melting temperature | 162 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃ | ASTM D7426 | |
| Decomposition temperature | 300 ℃p. 1: @5%Decomposition Temp. 20℃/min ℃ | no standard stated | |
| Density | 1.26 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
Print settings
- Nozzle
- 205–215 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 205-215℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Glow In The Darkp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Room Temp.; p. 2: Print Platform Material
- Nozzle 215-235℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Glow In The Darkp. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s; p. 2: Print Platform Material
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Support Material PVA
SUNLU, Product Information PLA Glow In The Darkp. 2
SIDDAMENT PLA Glow in the DarkStrength XY, MPa49Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.9IzodHDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h
SIDDAMENT PLA Glow in the DarkSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PLA Glow in the Dark - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 49 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 21 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2150 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 79 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 3.9 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 53 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2–4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, PLA Glow in the Dark - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PLA Glow in the Dark - Technical Datasheetp. 2
eSUN Luminous PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °C—Drying, °C, h—
eSUN Luminous PLAeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet Luminous PLA7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 72 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break | 11.8 %p. 1: Elongation at Break | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus | 1915 MPap. 1: Flexural Modulus | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength | 90 MPap. 1: Flexural Strength | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 5.4 kJ/m²p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 53 ℃(0.45Mpa)p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: GB/T 1634; 0.45 MPa | not in the median: measured on a moulded bar |
| Density | 1.2 g/cm³p. 1: Density | GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 190 - 230℃; Bed 45-60°CeSUN, Technical Data Sheet Luminous PLAp. 2: Extruder Temperature, Build Platform Temperature, Nozzle note
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
Toys
eSUN, Technical Data Sheet Luminous PLAp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet Luminous PLAp. 1 - Benefits
The product is modified based on PLA material, in addition it has gorgeous luminous appearance effect.PLA is an environmentally friendly material and easy to print.
eSUN, Technical Data Sheet Luminous PLAp. 1 - Nozzle wear
Luminous PLA is easy to grind nozzle and extruder gear, it is recommended to use steel nozzle or ruby nozzle, hardened steel extruder gear will be perfect , if the nozzle is clogging , replace the throat and nozzle
eSUN, Technical Data Sheet Luminous PLAp. 2 - Printing advice
The longer the irradiation time, the better the luminous effect
eSUN, Technical Data Sheet Luminous PLAp. 2
eSUN Luminous PLA RainbowStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg40Nozzle, °C210–230Bed, °C45–60Chamber, °C—Drying, °C, h—
eSUN Luminous PLA RainboweSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet Luminous PLA Rainbow7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 72 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break | 11.8 %p. 1: Elongation at Break | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus | 1915 MPap. 1: Flexural Modulus | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength | 90 MPap. 1: Flexural Strength | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 5.4 kJ/m²p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 53 ℃(0.45Mpa)p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: GB/T 1634; 0.45 MPa | not in the median: measured on a moulded bar |
| Density | 1.2 g/cm³p. 1: Density | GB/T 1033 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 210 - 230℃; Bed 45-60°CeSUN, Technical Data Sheet Luminous PLA Rainbowp. 2: Extruder Temperature, Build Platform Temperature, Nozzle note
Price
40 CAD/kgits one regular price in the sample
1 listing
- Shop3D.ca: 40 CAD/kgeSun 3D Printing PLA-Luminous Rainbow - 1.75mm (1kg) (SKU Luminous PLA175RB1)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (6)
- Good for
Toys
eSUN, Technical Data Sheet Luminous PLA Rainbowp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet Luminous PLA Rainbowp. 1 - Benefits
The product is modified based on PLA material, in addition it has gorgeous luminous appearance effect.PLA is an environmentally friendly material and easy to print.
eSUN, Technical Data Sheet Luminous PLA Rainbowp. 1 - Surface finish
Gorgeous luminous rainbow appearance
eSUN, Technical Data Sheet Luminous PLA Rainbowp. 1 - Nozzle wear
Luminous PLA is easy to grind nozzle and extruder gear, it is recommended to use steel nozzle or ruby nozzle, hardened steel extruder gear will be perfect , if the nozzle is clogging , replace the throat and nozzle
eSUN, Technical Data Sheet Luminous PLA Rainbowp. 2 - Printing advice
The longer the irradiation time, the better the luminous effect
eSUN, Technical Data Sheet Luminous PLA Rainbowp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.