PLA Galaxy
4 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
4 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- not published
How the numbers are worked out
Bambu Lab PLA GalaxyStrength XY, MPa26Strength Z, MPa21Modulus XY, GPa1.54Charpy notched, kJ/m²17.6HDT 0.45, °C55HDT 1.8, °C52Price, CAD/kg32Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA GalaxyBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Galaxy21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s InfillDensity 100% * All the specimens were printed at the following settings: Nozzle Temperature = 220 °C, Printing Speed = 200 mm/s, Bed Temperature = 35 °C,InfillDensity = 100%. All the specimens were annealed and dried at 55 °C for 8 h before testing. And the | |||
| Tensile modulus XY | 1540 ± 190 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1320 ± 150 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 26 ± 3 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 21 ± 4 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 9.3 ±1.1 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 7.1 ±0.9 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2200 ± 120 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1850 ± 140 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 58 ± 3 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 37 ± 3 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 55.4 ± 3.7 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043unnotched | not in the median: unnotched |
| Charpy impact strength XY | 17.6 ± 2.2 kJ/m² (notched)p. 2: Impact Strength (X-Y) (notched) | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 5.8 ± 1.2 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 55 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 52 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 52 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 56 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 156 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.19 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.45 %p. 2: Saturated Water | no standard namedAs the sheet prints it: ter Absorption Rate 25 °C, 55% RH | |
| Melt mass-flow rate | 11.0 ± 1.7 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190 - 230 °C; Bed 35 - 45°C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxyRecommended printing settings
Price
32 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- Bambu Lab Canada: 32 CAD/kgPLA Galaxy - Brown (13203) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
- 3D Printing Canada: 32 CAD/kgBrown - Bambu Lab PLA Galaxy Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
Its 2 documents
What the maker says (4)
- Benefits
Elevate your prints to new heights as they gleam with unparalleled brilliance from every angle, all while maintaining the ease of printing and exceptional strength and toughness you expect from PLA Basic.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Galaxyp. 1 - Surface finish
This unique blend creates mesmerizing visual effects, offering dynamic reflections and a glossy, smooth finish.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Galaxyp. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Galaxyp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Galaxyp. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxyTest specimen preparation
Chemicals and environment (7)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxyFlammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxySolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxyResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxyResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxyResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA GalaxyResistance to Oil and Grease - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Galaxy is 50 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Galaxyp. 3: Annealing note
Eryone Galaxy PLAStrength XY, MPa54.2Strength Z, MPa27.8Modulus XY, GPa2.03Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Galaxy PLAEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Galaxy PLA14 values | |||
| Tensile modulus XY | 2034.5 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 1872.8 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 54.2 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 27.8 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 2.1 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z (X-Z) | 1.9 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 2568.9 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 78.7 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Impact strength, test unclear | 2.8 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843print settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | listed under other properties |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 63 ℃p. 1: Glass transition temperature (° C) ℃ | no standard stated | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.23 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190℃-220℃; Bed 55-70℃; Drying 50℃-60℃, 6HEryone, Technical Data Sheet (TDS) Galaxy PLAp. 1: Recommended printing settings; p. 1: Sealed printing
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
It is perfect for everyday crafts and model toys
Eryone, Technical Data Sheet (TDS) Galaxy PLAp. 1 - Surface finish
Eryone Galaxy PLA filament is a material with a sparkling surface
Eryone, Technical Data Sheet (TDS) Galaxy PLAp. 1
SUNLU PLA GalaxyStrength XY, MPa43.3Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.8IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA GalaxySUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO PLA Galaxy12 valuesThe same values also in SUNLU, PLA Galaxy.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 43.3 ± 6 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 16.3 ± 5 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 3273 ± 300 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 80.3 ± 10 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 3.8 ± 2 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 15 ± 5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 82 Shore Dp. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | in the median |
| HDT XY, at 0.45 MPa | 54.6 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 60.9 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, PLA Galaxy | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Melting temperature | 167 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃also in SUNLU, PLA Galaxy | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.22 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 5.46 ± 2.5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| SUNLU, PLA Galaxy9 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 43.3 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Elongation at break XY | 16 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min % | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Flexural modulus XY | 3273 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: another value of this product is in it |
| Flexural strength XY | 80.3 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: another value of this product is in it |
| Izod impact strength XY | 3.8 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2 | ISO 180As the sheet prints it: 23℃ ISO180 | not in the median: another value of this product is in it |
| Izod impact strength ZX | 18.5 KJ/m2p. 1: IZOD Impact Notched (Z-X) ISO180 23℃ KJ/m2 | ISO 180As the sheet prints it: Z-X 23℃ ISO180 | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 54.6 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃ | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO75 | not in the median: another value of this product is in it |
| Density | 1.2225 g/cm3p. 1: Density ISO1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO1183 | |
| Melt mass-flow rate | 5.46 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min | specimen not stated, ISO 1133As the sheet prints it: 190℃/2.16kg ISO1133 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 200-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA Galaxyp. 2: Recommended printing settings; p. 2: Nozzle Temp.; p. 2: late Material
- Nozzle 200-230; Bed 50-60℃; Chamber Normal temperature; Drying 50-60℃SUNLU, PLA Galaxyp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Material
Price
Not in the price sample.
Its 3 documents
What the maker says (5)
- Good for
Decorative items, toys, accessories, cosplay props
SUNLU, PLA Galaxyp. 1 - Surface finish
The same surface shows different colors when observed from different angles.
SUNLU, PLA Galaxyp. 1 - Supports and removal
Support Material PVA
SUNLU, PLA Galaxyp. 2 - Surface finish
PLA with an iridescent color-shifting effect from every angle
SUNLU, TECHNICAL DATA SHEET ISO PLA Galaxyp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA Galaxyp. 2
FormFutura Galaxy PLAStrength XY, MPa70Strength Z, MPa—Modulus XY, GPa3.12Charpy notched, kJ/m²3.4HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–60Chamber, °CnoneDrying, °C, hnone
FormFutura Galaxy PLAFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Galaxy PLA7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3120 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 70 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 3.4 KJ/m²p. 1: Impact strength | ISO 179tested at 23° C (73° F)notched | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 60° C °Cp. 1: Viscat softening temp. | ISO 306 | |
| Melting temperature | 115 ± 35° C °Cp. 1: Melting termperature | ISO 11357 | |
| Density | 1.24 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 9.56 g/10minp. 1: Melt flow rate | ISO 1133 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- not neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, Galaxy PLA.
Its 3 print profiles, in the documents' words
- Nozzle ± 200 - 230° CFormFutura, Technical Data Sheet Galaxy PLAp. 1: Recommended printing settings; p. 1: Description
- Nozzle ± 185 – 215° C; Bed ± 50 – 60° CFormFutura, Galaxy PLAp. 1: General printing guidelines
- Nozzle 185 - 215 °C; Bed 50 - 60 °C; Drying Not necessary; 30 - 40 °C; 6 hFormFutura, Technical Data Sheet Galaxy PLAp. 1: drying; p. 1: enclosure; p. 1: hardened_nozzle; p. 1: Recommended print settings regular speed (nozzle, bed)
Price
Not in the price sample.
Its 4 documents
What the maker says (16)
- Surface finish
The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
FormFutura, Technical Data Sheet Galaxy PLAp. 1 - Surface finish
Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle colour shadings and radiance.
FormFutura, Technical Data Sheet Galaxy PLAp. 1 - Nozzle wear
Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.
FormFutura, Technical Data Sheet Galaxy PLAp. 1 - Surface finish
Galaxy PLA is a deep metallic colored PLA type of 3D printer filament with a high contend of silver aluminum particles inside, which gives 3D printed parts a sparkling galaxy-like effect.
FormFutura, Galaxy PLAp. 1 - Surface finish
Galaxy PLA is a deep metallic coloured PLA filament.
FormFutura, Galaxy PLAp. 1 - Surface finish
This results in a beautiful sparkling, reflecting and glittering finish to a printed object.
FormFutura, Galaxy PLAp. 1 - Surface finish
Printed objects have subtle colour shadings and radiance and no visible layers.
FormFutura, Galaxy PLAp. 1 - Nozzle wear
Despite its high silver-aluminium-flake content, Galaxy PLA is not abrasive to the nozzle of your 3D printer.
FormFutura, Galaxy PLAp. 1 - Surface finish
Extremely glittering & shimmering surface finish
FormFutura, Galaxy PLAp. 1 - Surface finish
3D print objects without visible layers
FormFutura, Galaxy PLAp. 1 - Nozzle wear
Not abrasive to the nozzle of 3D printers
FormFutura, Galaxy PLAp. 1 - Surface finish
Incredibly deep coloured 3D printer filament
FormFutura, Galaxy PLAp. 1 - Benefits
Very easy to print
FormFutura, Galaxy PLAp. 1 - Warping and shrinkage
Warp-free printing and no deformation after cooling
FormFutura, Galaxy PLAp. 1 - Adhesion between layers
Improved flowing behaviour and inter-layer adhesion
FormFutura, Galaxy PLAp. 1 - Printing advice
Good first layer adhesion to several (un)heated print surfaces
FormFutura, Galaxy PLAp. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.