PLA Wood
20 products from 18 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
20 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- added filler or additive
- hardened nozzle
- not published
How the numbers are worked out
Bambu Lab PLA WoodStrength XY, MPa26Strength Z, MPa15Modulus XY, GPa2.36Charpy notched, kJ/m²6.3HDT 0.45, °C60HDT 1.8, °C57Price, CAD/kg32Nozzle, °C190–240Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA WoodBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Wood21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s Infill Density 100% * All the specimens were printed at the following settings: Nozzle Temperature = 220 °C, Printing Speed = 200 mm/s, Bed Temperature = 35 °C, Infill Density = 100%. All the specimens were annealed and dried at 55 °C for 8 h before testing. And | |||
| Tensile modulus XY | 2360 ± 190 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1770 ± 150 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 26 ± 5 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 15 ± 4 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 15.3 ± 3.1 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 4.5 ± 1.7 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2780 ± 120 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1975 ± 140 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 55 ± 4 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 28 ± 4 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 15.7 ± 3.7 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 6.3 ± 2.2 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 5.6 ± 1.2 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 60 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 57 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 54 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 64 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 156 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.21 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 1.25 %p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: te 25 °C, 55% RH | |
| Melt mass-flow rate | 29.4 ± 1.7 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
Print settings
- Nozzle
- 190–240 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190 - 240 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA WoodRecommended printing settings
Price
32 CAD/kgits one regular price in the sample
1 listing
- Bambu Lab Canada: 32 CAD/kgPLA Wood - Black Walnut (13107) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
Its 2 documents
What the maker says (3)
- Surface finish
Bambu PLA Wood - a mix of our high-quality PLA with fine wood powder to give your 3D prints a realistic wood-like appearance and texture.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Woodp. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Woodp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Woodp. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA WoodTest specimen preparation
Chemicals and environment (7)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA WoodSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA WoodResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA WoodResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA WoodResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA WoodResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA WoodFlammability - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Wood is 50 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Woodp. 3: Annealing note
Eryone Wood PLAStrength XY, MPa30.1Strength Z, MPa8.9Modulus XY, GPa1.41Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg45Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Wood PLAEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Wood PLA13 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 1405.1 MPap. 2: Elastic modulus X-Y | GB/T 1040As the sheet prints it: GB/T 1040.1-2006; rate=50mm/min | in the median |
| Tensile modulus Z (X-Z) | 1157.7 MPap. 2: Elastic modulus X-Z | GB/T 1040As the sheet prints it: GB/T 1040.1-2006; rate=50mm/min | in the median |
| Tensile strength (yield or break not stated) XY | 30.1 MPap. 2: Tensile strength X-Y | GB/T 1040As the sheet prints it: GB/T 1040.4; rate=50mm/min | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 8.9 MPap. 2: Tensile strength X-Z | GB/T 1843As the sheet prints it: GB/T 1843; rate=50mm/min | in the median |
| Elongation at break XY | 1.2 %p. 2: Elongation at break X-Y | GB/T 1040As the sheet prints it: GB/T 1040.4; rate=50mm/min | in the median |
| Elongation at break Z (X-Z) | 0.9 %p. 2: Elongation at break X-Z | GB/T 1040As the sheet prints it: GB/T 1040.4; rate=50mm/min | in the median |
| Flexural modulus orientation not stated | 2051.8 MPap. 2: Bending modulus | GB/T 9341As the sheet prints it: GB/T 9341; rate=2mm/min | in the median |
| Flexural strength orientation not stated | 47.9 MPap. 2: Bending strength | GB/T 9341As the sheet prints it: GB/T 9341; rate=2mm/min | in the median |
| Charpy impact strength orientation not stated | 3.9 kJ/m2p. 2: Charpy Impact strenght | GB/T 1843As the sheet prints it: GB/T 1843; energy=2.75J | not in the median: notch not stated |
| HDT at 0.45 MPa | 54 ℃p. 1: Heat distortion temperature(° C) | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: ASTM D648; 0.45MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) | specimen not stated, ASTM D1525, ISO 306, GB/T 1633As the sheet prints it: ASTM D1525 (ISO 306 GB/T 1633) | |
| Density | 1.1 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: ASTM D792 (ISO 1183, GB/T 1033) | |
| Melt mass-flow rate | 10.4 g/10minp. 1: Melt Index(g/10 min) | specimen not stated, no standard namedAs the sheet prints it: conditions=220 ° C, 10kg 240 ° C, 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190℃-220℃; Bed 55-70℃; Drying 50℃-60℃, 6HEryone, Technical Data Sheet (TDS) Wood PLAp. 1: Nozzle temperature, Bed temperature, Sealed printing; p. 1: Drying conditions; p. 1: Bed material
Price
45 CAD/kgits one regular price in the sample
1 listing
- ERYONE Canada: 45 CAD/kgPLA Wood Filament - 1.75mm±0.03mm (1kg) / PLA Wood-Deep (SKU B0105002)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (4)
- Good for
suitable for a variety of printing projects, including everyday accessories, decorative items, toys, sculptures, and casings.
Eryone, Technical Data Sheet (TDS) Wood PLAp. 1 - Warping and shrinkage
This material is resistant to nozzle clogging and has a low shrinkage rate
Eryone, Technical Data Sheet (TDS) Wood PLAp. 1 - Surface finish
It showcases natural wood grain and a matte surface finish.
Eryone, Technical Data Sheet (TDS) Wood PLAp. 1 - Odour and emissions
Eryone PLA Wood filament is a 3D printing material that closely resembles the appearance of natural wood, emitting a subtle wood scent during the printing process.
Eryone, Technical Data Sheet (TDS) Wood PLAp. 1
Extrudr WOODStrength XY, MPa35Strength Z, MPa—Modulus XY, GPa3.2Charpy notched, kJ/m²2.5HDT 0.45, °C49HDT 1.8, °C46Price, CAD/kg—Nozzle, °C170–190Bed, °C20–60Chamber, °CnoneDrying, °C, h504 h
Extrudr WOODExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, WOOD Filament – Wood-Fibre-Reinforced 3D Printing Filament | Extrudr19 valuesThe same values also in Extrudr, TECHNICAL DATA SHEET WOOD. | |||
| Tensile modulus orientation not stated | 3200 MPap. 1: Tensile modulus (Young's modulus) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 35 MPap. 1: Tensile strength at yield | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 35 MPap. 1: Tensile stress at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 2 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3400 MPap. 1: Flexural modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 43 MPap. 1: Flexural strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 2.5 kJ/m²p. 1: Charpy notched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 2 kJ/m²p. 1: Charpy notched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: tested below room temperature |
| Charpy impact strength orientation not stated | 16 kJ/m²p. 1: Charpy unnotched impact strength (+23°C) | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: unnotched |
| Charpy impact strength orientation not stated | 13 kJ/m²p. 1: Charpy unnotched impact strength (-30°C) | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: unnotched |
| HDT at 0.45 MPa | 49 °Cp. 1: Heat deflection temp. (HDT/B) — 0.45 MPa | ISO 75As the sheet prints it: ISO 75-1; 0.45 MPa; method B | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 46 °Cp. 1: Heat deflection temp. (HDT/A) — 1.8 MPa | ISO 75As the sheet prints it: ISO 75-1; 1.8 MPa; method A | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 60 °Cp. 1: Glass transition temp. (Tg) | ISO 11357As the sheet prints it: ISO 11357-1 (DSC) | in the median |
| Melting temperature | 150–170 °Cp. 1: Melting point (Tm) | ISO 3146As the sheet prints it: ISO 3146-C | |
| Decomposition temperature | 240 °Cp. 1: Thermal decomposition temp. | no standard stated | |
| Water absorption | 1 %p. 1: Water absorption (saturation, 23°C) | no standard namedAs the sheet prints it: saturation | |
| Melt mass-flow rate | 22 g/10 minp. 1: Melt flow rate (MFR) — 210°C/2.16 kgalso in Extrudr, TECHNICAL DATA SHEET WOOD | ISO 1133As the sheet prints it: ISO 1133-1 (210°C/2.16 kg) | |
| Melt volume-flow rate | 25 cm³/10 minp. 1: Melt volume rate (MVR) — 235°C/5.0 kg | no standard namedAs the sheet prints it: 5.0 kg | |
| Mould shrinkage orientation not stated | 0.3 %p. 1: Mould shrinkage | ISO 294As the sheet prints it: ISO 294-4 | |
| Extrudr, TECHNICAL DATA SHEET WOOD5 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 40 MPap. 1: Tensile strength ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Flexural modulus | 3200 MPap. 1: Flexural modulus ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Flexural strength | 43 MPap. 1: Flexural strength ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 48 °Cp. 1: VICAT A (VST) ISO 306 °C | ISO 306 | |
| Density | 1.23 g/cm³p. 1: Density ISO 2781 g/cm³ | specimen not stated, ISO 2781 | |
Print settings
- Nozzle
- 170–190 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 170-190°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET WOODp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.5mm Nozzle
- Nozzle 170–190 °C; Bed 20–60 °C; Drying Drying temperature 50 °C; Drying time 4 hExtrudr, WOOD Filament – Wood-Fibre-Reinforced 3D Printing Filament | Extrudrp. 1: Print Settings, Drying (drying only; p. 1: Recommended settings for printers with a 0.4 mm nozzle
Price
Not in the price sample.
Its 3 documents
What the maker says (5)
- Benefits
Biodegradable (DIN EN ISO 14855)
Extrudr, TECHNICAL DATA SHEET WOODp. 1 - Benefits
This wood-fibre-reinforced plastic is characterised by exceptional processing properties.
Extrudr, TECHNICAL DATA SHEET WOODp. 1 - Warping and shrinkage
Low warping
Extrudr, TECHNICAL DATA SHEET WOODp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET WOODp. 1 - Odour and emissions
Wood-like smell and aesthetics
Extrudr, TECHNICAL DATA SHEET WOODp. 1
SUNLU WOODStrength XY, MPa33Strength Z, MPa—Modulus XY, GPa3.24Charpy notched, kJ/m²6IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU WOODSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO WOOD15 valuesThe same values also in SUNLU, Product Information PLA Wood.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 33 ± 6 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 10 ± 5 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 3040 ± 200 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 55 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 6 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 2.8 ± 1 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 77 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 55 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 60 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, Product Information PLA Wood | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃also in SUNLU, Product Information PLA Wood | ISO 306As the sheet prints it: 5kg ISO 306 | |
| Melting temperature | 164 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃also in SUNLU, Product Information PLA Wood | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Decomposition temperature | ≥355 ℃p. 1: @5%Decomposition Temp.also in SUNLU, Product Information PLA Wood | specimen not stated, ISO 11358As the sheet prints it: ISO 11358; rate=20 ℃/min | |
| Density | 1.17 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 3.8 ± 1.5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Moulding Shrinkagealso in SUNLU, Product Information PLA Wood | specimen not stated, ISO 294tested at 23℃ | |
| SUNLU, Product Information PLA Wood9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3240 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 48.6 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 8.1 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 2212 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 58 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Izod impact strength | 40 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: another value of this product is in it |
| Density | 1.25 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | specimen not stated, ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 8.5 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | specimen not stated, ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 200-220; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO WOODp. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 205-215℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Woodp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Room Temp.
- Nozzle 215-235℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Woodp. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Surface finish
PLA with a wood-like texture and natural wood scent
SUNLU, TECHNICAL DATA SHEET ISO WOODp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO WOODp. 2 - Surface finish
Contains 20% real wood fibers with woody texture and wood scent
SUNLU, Product Information PLA Woodp. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information PLA Woodp. 2
Filament2Print COFFEEStrength XY, MPa23.5Strength Z, MPa—Modulus XY, GPa3.33Charpy notched, kJ/m²—HDT 0.45, °C58HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C40–60Chamber, °C—Drying, °C, h—
Filament2Print COFFEEFilament2Print
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Filament2Print, FICHA TÉCNICA COFFEE11 values | |||
| Tensile modulus XY | 3330,6 MPap. 1: Módulo de tracción | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 23,5 MPap. 1: Resistencia a la tracción | ISO 527 | in the median |
| Elongation at break XY | 13,4 %p. 1: Alargamiento por tracción a la rotura | ISO 527 | in the median |
| Tensile strain at strength XY | 1,4 %p. 1: Alargamiento al esfuerzo máximo | ISO 527 | listed under other properties |
| Flexural modulus XY | 2326,7 MPap. 1: Módulo de flexión | ISO 178 | in the median |
| Flexural strength XY | 49,2 MPap. 1: Resistencia a la flexión | ISO 178 | in the median |
| Flexural elongation at break XY | 9,8 %p. 1: Alargamiento por flexión a la rotura | ISO 178 | listed under other properties |
| HDT at 0.45 MPa | 58 °Cp. 1: HDT B (0,45 MPa) | ISO 75As the sheet prints it: 0,45 MPa ISO 75 | in the median |
| Glass transition temperature | 59 °Cp. 1: Temperatura de transición vítrea (Tg) | ISO 11357 | in the median |
| Vicat softening temperature | 56 °Cp. 1: VICAT B (50N 50°C /h) | ISO 306As the sheet prints it: 50N ISO 306 | |
| Density | 1,05 g/cm³p. 1: Densidad | ISO 1183 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 – 230 °C; Bed 40 – 60 °CFilament2Print, FICHA TÉCNICA COFFEEp. 1: Temperatura de impresión; p. 1: Temperatura de la cama; p. 1: Recomendaciones de boquillas
Price
Not in the price sample.
Its 2 documents
AzureFilm LumberLayStrength XY, MPa25.8Strength Z, MPa13.2Modulus XY, GPa2.2Charpy notched, kJ/m²—HDT 0.45, °C87HDT 1.8, °C—Price, CAD/kg—Nozzle, °C≥ 220Bed, °C60Chamber, °C—Drying, °C, h558 h
AzureFilm LumberLayAzureFilm
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
AzureFilm, Technical Data Sheet 10.24 LumberLay23 valuesUnless a row says otherwise: printed specimenprint settings100% infill; 2 shells; layer height of 0.2mm | |||
| Tensile modulus XY | 2200 MPap. 1: Tensile Modulus (XY) | ISO 527As the sheet prints it: ISO 527-2 | in the median |
| Tensile modulus Z (ZX) | 1800 MPap. 1: Tensile Modulus (ZX) | ISO 527As the sheet prints it: ISO 527-2 | in the median |
| Tensile modulus XZ | 2400 MPap. 1: Tensile Modulus (XZ) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) XY | 25.8 MPap. 1: Tensile Strength (XY) | ISO 527As the sheet prints it: ISO 527-2 | in the median |
| Tensile strength (yield or break not stated) Z (ZX) | 13.2 MPap. 1: Tensile Strength (ZX) | ISO 527As the sheet prints it: ISO 527-2 | in the median |
| Tensile strength (yield or break not stated) XZ | 30.4 MPap. 1: Tensile Strength (XZ) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 24.5 MPap. 1: Yield Strength (XY) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: another value of this product is in it |
| Tensile yield strength Z (ZX) | 13.5 MPap. 1: Yield Strength (ZX) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: another value of this product is in it |
| Tensile yield strength XZ | 27.7 MPap. 1: Yield Strength (XZ) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 4.1 %p. 1: Strain at Yield (XY) | ISO 527As the sheet prints it: ISO 527-2 | listed under other properties |
| Elongation at yield Z (ZX) | 0.7 %p. 1: Strain at Yield (ZX) | ISO 527As the sheet prints it: ISO 527-2 | listed under other properties |
| Elongation at yield XZ | 5.5 %p. 1: Strain at Yield (XZ) | ISO 527As the sheet prints it: ISO 527-2 | listed under other properties |
| Flexural modulus XY | 2400 MPap. 1: Flexural Modus (XY) | ISO 178 | in the median |
| Flexural modulus XZ | 2900 MPap. 1: Flexural Modus (XZ) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 1600 MPap. 1: Flexural Modus (ZX) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 50.3 MPap. 1: Flexural Strength (XY) | ISO 178 | in the median |
| Flexural strength XZ | 54.7 MPap. 1: Flexural Strength (XZ) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 2.7 MPaphysically implausiblep. 1: Flexural Strength (ZX) | ISO 178print settings not stated | not in the median: physically implausible as published |
| Charpy impact strength XY | 19.7 kJ/m²p. 1: Impact Strength | ISO 179 | not in the median: notch not stated |
| HDT | 87* °Cp. 1: Heat deflect. temp. | specimen not stated; its document points to a moulded or resin bar, ISO 75print settings not stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 210 °Cp. 1: Melting temp. ISO 294 | specimen not stated, ISO 294print settings not stated | |
| Density | 0.97 g/ccp. 1: Specific gravity ISO 1133 | specimen not stated, ISO 1133print settings not stated | |
| Melt volume-flow rate | 5.2 cm³/10 minp. 1: Melt flow rate | specimen not stated, ISO 1133print settings not stated | |
Print settings
- Nozzle
- at least 220 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in AzureFilm, LumberLay - AzureFilm.
Its 2 print profiles, in the documents' words
- Nozzle >220 °C; Bed 60 °CAzureFilm, Technical Data Sheet 10.24 LumberLayp. 1: Description; p. 1: Bed temp.; p. 1: Bed surface
- Nozzle 200–230°C; Bed 60°C; Drying 8 hours at 55°CAzureFilm, LumberLay - AzureFilmp. 1: drying; p. 1: nozzle; p. 1: bed; p. 1: plate
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Surface finish
LumberLay is a unique material that has the look and feel of real wood.
AzureFilm, Technical Data Sheet 10.24 LumberLayp. 1 - Nozzle wear
The only downside of this filament is that it tends to wear the nozzle due to its structure.
AzureFilm, Technical Data Sheet 10.24 LumberLayp. 1 - Nozzle wear
That’s why we recommend using at least a 0.6 mm abrasion-resistant nozzle.
AzureFilm, Technical Data Sheet 10.24 LumberLayp. 1
SIDDAMENT PLA WoodStrength XY, MPa37Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5.2IzodHDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h
SIDDAMENT PLA WoodSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PLA Wood - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 37 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3154 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 75 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 5.2 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 54 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.23 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.35 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2–4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, PLA Wood - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PLA Wood - Technical Datasheetp. 2
Flashforge WOODStrength XY, MPa30Strength Z, MPa—Modulus XY, GPa1Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C25–60Chamber, °C25–40Drying, °C, h—
Flashforge WOODFlashforge
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet WOOD Filament10 values | |||
| Tensile modulus XY | 1000-1100 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 200 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 30-35 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 200 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 7.5-10 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 200 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 50-55 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 200 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Izod impact strength XY | 3.5-4 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2 | ISO 180print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 200 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 50 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.20-1.21 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 0.6 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 10-15 g/10minp. 1: Melt Flow Rate (MFR) (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190~220℃ (200℃ recommended); Bed Room temperature~60℃ (40℃ recommended); Chamber Room temperature~40℃Flashforge, Technical Data Sheet WOOD Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
It offers excellent dimensional stability, realistic wood texture, non-warping, and non-cracking, and is easy to print, with the ability to be printable on various FFF 3D printers.
Flashforge, Technical Data Sheet WOOD Filamentp. 1 - Benefits
Realistic wood texture/Dimensional stability/Easy to print
Flashforge, Technical Data Sheet WOOD Filamentp. 1 - Supports and removal
Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet WOOD Filamentp. 2
Fillamentum TimberfillStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa3.2Charpy notched, kJ/m²—HDT 0.45, °C48HDT 1.8, °C—Price, CAD/kg—Nozzle, °C150–170Bed, °C50–60Chamber, °C—Drying, °C, h50≥ 2 h
Fillamentum TimberfillFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, Timberfill9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3200 MPap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 39 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 2 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 22 kJ/m2p. 1: Charpy impact strength | ISO 179As the sheet prints it: ISO 179/1eU | not in the median: unnotched |
| Hardness | 77 Shore Dp. 1: Hardness | ISO 7619 | in the median |
| HDT at 0.45 MPa | 48 °Cp. 1: Heat distortion temperature | ISO 75As the sheet prints it: 0,45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 145-160 °Cp. 1: Melting temperature | no standard stated | |
| Density | 1,26 g/cm3p. 1: Material density | no standard statedtested at 20 °C | |
| Melt volume-flow rate | 25 cm3/10 minp. 1: Melt volume index | ISO 1133As the sheet prints it: ISO 1133 190 °C, 2,16 kg | |
Print settings
- Nozzle
- 150–170 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 50 °C for ≥ 2 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Fillamentum, Timberfill®; bed in Fillamentum, Timberfill®.
Its 3 print profiles, in the documents' words
- Nozzle 150–170 °C; Bed 50–60 °CFillamentum, Timberfillp. 1: Recommended printing settings (Print temperature, Hot pad); p. 1: Recommended nozzle
- Nozzle 165-185 °C; Bed 40-55 °CFillamentum, Timberfill®p. 1: Product page header
- Drying 50 °C; minimum drying time 2 h; the need to dry 5 (1 – not necessary to dry, 5 – always needed)Fillamentum, Drying of filaments before processing on 3D printerp. 2: p.2 Table1 own product row TIMBERFILL®; own minimum-time/temperature/need columns, with p1 restrictions
Price
Not in the price sample.
Its 4 documents
What the maker says (27)
- Surface finish
The printed objects have an authentic look and temporary smell of wood.
Fillamentum, Timberfill®p. 1 - Benefits
Thanks to the bio-sourced origin of the material, it is 100% biodegradable by industrial composting.
Fillamentum, Timberfill®p. 1 - Benefits
Timberfill® is a material with a high quality of printing and an excellent lamination.
Fillamentum, Timberfill®p. 1 - Benefits
Made of natural ingredients , can be biodegraded by industrial composting.
Fillamentum, Timberfill®p. 1 - Benefits
The material exhibits similar mechanical features as PLA.
Fillamentum, Timberfill®p. 1 - Surface finish
Models printed with this material have a genuine appearance and temporary smell of wood.
Fillamentum, Timberfill®p. 1 - Surface finish
Aesthetically appealing wood finish
Fillamentum, Timberfill®p. 1 - Odour and emissions
Aromatic and pleasant smelling during the printing process and short after
Fillamentum, Timberfill®p. 1 - Benefits
Can be easily post-processed using standard sandpaper
Fillamentum, Timberfill®p. 1 - Benefits
Possible to stain after printing
Fillamentum, Timberfill®p. 1 - Warping and shrinkage
Very low tendency to warp or shrink
Fillamentum, Timberfill®p. 1 - Benefits
Can be printed well at high speeds
Fillamentum, Timberfill®p. 1 - Benefits
Rigid, not easily bendable
Fillamentum, Timberfill®p. 1 - Benefits
Low brittleness in bulk object
Fillamentum, Timberfill®p. 1 - Nozzle wear
Not abrasive
Fillamentum, Timberfill®p. 1 - Good for
Safe to use in electrical and electronic equipment
Fillamentum, Timberfill®p. 1 - Benefits
It is 100% bio-based and biodegradable in anaerobic conditions and in water.
Fillamentum, Timberfillp. 1 - Benefits
This material excels by high mechanical resistance and hardness.
Fillamentum, Timberfillp. 1 - Adhesion between layers
It offers great printing properties, layer adhesion and interesting surface appearance.
Fillamentum, Timberfillp. 1 - Surface finish
The models printed from Timberfill filaments have real look of wood.
Fillamentum, Timberfillp. 1 - Good for
The material can be used for production of electrical and electronic equipment.
Fillamentum, Timberfillp. 1 - Pitfalls and limitations
The use of the material in the food industry is not recommended.
Fillamentum, Timberfillp. 1 - Printing advice
It may differ according to the printer and the object.
Fillamentum, Timberfillp. 1 - Printing advice
Try your own settings before printing.
Fillamentum, Timberfillp. 1 - Precision and tolerance
+/- 0,10 mm, which are strictly controlled throughout production.
Fillamentum, Timberfillp. 1 - Nozzle wear
It is recommended to use the nozzle of 0,5 mm in diameter.
Fillamentum, Timberfillp. 1 - Surface finish
Note: The colour tone can have a slight inaccuracy due to natural origin of the material.
Fillamentum, Timberfillp. 1
Spectrum WOODStrength XY, MPa47Strength Z, MPa—Modulus XY, GPa2.9Charpy notched, kJ/m²4.4HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C0–45Chamber, °CnoneDrying, °C, h502 h
Spectrum WOODSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET WOOD9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2900 MPap. 1: Modulus of elasticity | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 47 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 38 MPap. 1: Tensile stress at break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 6,50 %p. 1: Tensile strain at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strain at strength orientation not stated | 5,00%p. 1: Tensile strain at tensile strength | ISO 527 | listed under other properties |
| Charpy impact strength | 21 kJ/m2p. 1: Impact Strength (Charpy), RT | ISO 179As the sheet prints it: ISO 179-1/1 | not in the median: unnotched |
| Charpy impact strength orientation not stated | 4.4 kJ/m2p. 1: Notched impact strength (Charpy), RT | ISO 179As the sheet prints it: ISO 179-1/1 eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 155 °Cp. 1: Melting temperature | ISO 3146As the sheet prints it: ISO 3146-C | |
| Melt mass-flow rate | 2.5-5.0 g/10 minp. 1: Melt flow rate (190°C/2.16kg) | ISO 1133As the sheet prints it: 190°C/2.16kg ISO 1133 | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO2 valuesUnless a row says otherwise: specimen not stated | |||
| HDT | 55°Cp. 4: HDT | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.15 g/cm³p. 4: Density [g/cm³] | no standard stated | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 190-220°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET WOODp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: Recommended nozzle
- Nozzle 190-220 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended; p. 23: Adhesive
- Drying 50°C, 2h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 45 per kg, sale priceNatural - Spectrum WOOD Filament - 1.75mm, 1kg (SKU 67bbba19e7849)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 5 documents
What the maker says (10)
- Benefits
made of biodegradable raw materials
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Benefits
Spectrum WOOD filament is a 100% organic and biodegradable product.
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Surface finish
Besides the visual aspects which imitate the appearance of wood, items manufactured of this material have a structure resembling the one of chipboards.
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Surface finish
The material has a unique quality: not only does it looks like wood, but it also feels like genuine wood, be-cause of natural wood content in the composition.
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Surface finish
perfect side surface of prints
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Odour and emissions
typical smell and appearance of wooden chipboards
Spectrum, TECHNICAL DATA SHEET WOODp. 1 - Benefits
Natural wood content, perfect side surface of prints, wood appearance
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Surface finish
perfect side surface of prints, wood appearance
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Fiberlogy FiberWoodStrength XY, MPa27Strength Z, MPa—Modulus XY, GPa3.6Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–200Bed, °C50–70Chamber, °CnoneDrying, °C, h506 h
Fiberlogy FiberWoodFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy FiberWood9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3600 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 27 MPap. 1: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 26 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 0.9 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 0.9 %p. 1: Elongation @ Yield ISO 527 % | specimen not stated, ISO 527 | listed under other properties |
| Charpy impact strength | 14 kJ/m2p. 1: Charpy Impact Strength (Unnotched) @ 23°C ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: unnotched |
| HDT at 0.45 MPa | 50 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 65 °Cp. 1: Vicat Softening Temperature ISO 306 °C | specimen not stated, ISO 306 | |
| Density | 1.30 g/cm3p. 1: Specific Density ISO 1183 g/cm3 | specimen not stated, ISO 1183 | |
| Fiberlogy, FiberWood PLA Filament - Fiberlogy1 value | |||
| Charpy impact strength orientation not stated | 14 kJ/m²p. 1: Charpy impact strength (unnotched) @ 23°C | ISO 179tested at 23°C | not in the median: unnotched |
Print settings
- Nozzle
- 180–200 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Fiberlogy, FiberWood PLA Filament - Fiberlogy, Fiberlogy, Filament FiberWood – S2 - Fiberlogy; bed in Fiberlogy, FiberWood PLA Filament - Fiberlogy, Fiberlogy, Filament FiberWood – S2 - Fiberlogy.
Its 3 print profiles, in the documents' words
- Nozzle 180°C - 200°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy FiberWoodp. 1: Recommended printing settings
- Nozzle 190–210°C; Bed 60°C; Drying 50°C / 6 hoursFiberlogy, FiberWood PLA Filament - Fiberlogyp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
- Nozzle 190–210°C; Bed 60°C; Drying 50°C / 6 hoursFiberlogy, Filament FiberWood – S2 - Fiberlogyp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 4 documents
What the maker says (6)
- Benefits
Fiberlogy FiberWood is a 3D printing filament that allows you to create realistic, wood-like prints with a pleasant, natural wood scent.
Fiberlogy, FiberWood PLA Filament - Fiberlogyp. 1 - Benefits
Easy feeding of filament into the extruder—without the material breaking
Fiberlogy, FiberWood PLA Filament - Fiberlogyp. 1 - Surface finish
The ability to sand, varnish, and dye prints
Fiberlogy, FiberWood PLA Filament - Fiberlogyp. 1 - Surface finish
The material is easy to print with and can be sanded and stained, allowing you to achieve unique, artistic effects.
Fiberlogy, FiberWood PLA Filament - Fiberlogyp. 1 - Good for
It’s ideal for decorative and design-oriented 3D projects.
Fiberlogy, Filament FiberWood – S2 - Fiberlogyp. 1 - Surface finish
The material is easy to print with, and it can be sanded and stained, allowing you to achieve unique, artistic effects.
Fiberlogy, Filament FiberWood – S2 - Fiberlogyp. 1
Yousu WOODStrength XY, MPa36.7Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–240Bed, °C60Chamber, °C—Drying, °C, h—
Yousu WOODYousu
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Yousu, YOUSU WOOD 3D FILMAENT Technical Data Sheet7 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 36.7 MPap. 1: Tensile Stress MPa 50mm/min | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6 %p. 1: Tensile Elongation % 50mm/min | no standard namedAs the sheet prints it: 50mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3050 MPap. 1: FlexuralModulus | ASTM D790As the sheet prints it: ASTM D790; rate=2mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 68.6 MPap. 1: Flexural Strengh | ASTM D790As the sheet prints it: ASTM D790; rate=2mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.254 g/cm3p. 1: Density ASTM D792 g/cm3 23℃ | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 5.6 g/10minp. 1: Melt Flow Rate ASTM D1238 g/10min 190 ℃, 2.16Kg | ASTM D1238As the sheet prints it: 190 ℃ 2.16Kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.4-0.6 %p. 1: Mold Shrinkage ASTM D955 % 23℃ | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
Print settings
- Nozzle
- 190–240 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-240℃; Bed None needed(or 60℃ if applicable)Yousu, YOUSU WOOD 3D FILMAENT Technical Data Sheetp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
Fabru PLA with Cork Fibers (Cork Filament)Strength XY, MPa39Strength Z, MPa—Modulus XY, GPa2.15Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C50Chamber, °C—Drying, °C, h604 h
Fabru PLA with Cork Fibers (Cork Filament)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, PLA with Cork Fibers (Cork Filament)5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2150 MPap. 1: Tensile Modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 39 MPap. 1: Tensile Strength (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5.4 %p. 1: Elongation at Break (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.02 g/cm3p. 1: Density (ASTM D1505) | ASTM D1505 | |
| Melt mass-flow rate | 2.5-5 g/10minp. 1: MFR (ISO 1133) | ISO 1133 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-230 °C; Bed Not required, 50 °C recommended; Drying 60 °C; 2-4 hoursFabru, PLA with Cork Fibers (Cork Filament)p. 1: Printing Temperature; p. 1: Heated Bed Temperature; p. 1: Drying Temperature / Drying Time
Price
Not in the price sample.
Its 2 documents
What the maker says (8)
- Good for
The cork filament is excellent for objects that should have a similar look and feel to cork.
Fabru, PLA with Cork Fibers (Cork Filament)p. 1 - Good for
Ideally suited for, e.g., seat surfaces, handles, model making, airplane models, etc.
Fabru, PLA with Cork Fibers (Cork Filament)p. 1 - Benefits
The filament is relatively flexible.
Fabru, PLA with Cork Fibers (Cork Filament)p. 1 - Benefits
Biodegradable
Fabru, PLA with Cork Fibers (Cork Filament)p. 1 - Pitfalls and limitations
Can become soft again at 60 degrees Celsius
Fabru, PLA with Cork Fibers (Cork Filament)p. 1 - Warping and shrinkage
Very low warping and shrinkage
Fabru, PLA with Cork Fibers (Cork Filament)p. 1 - Surface finish
The printed parts have a pleasantly soft surface.
Fabru, PLA with Cork Fibers (Cork Filament)p. 1 - Moisture sensitivity
Since cork absorbs a lot of moisture, it is advisable to always store the filament in an airtight package and, if necessary, dry it again.
Fabru, PLA with Cork Fibers (Cork Filament)p. 1
Fabru PLA with wood fibers (wood filament)Strength XY, MPa47Strength Z, MPa—Modulus XY, GPa2.9Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C50Chamber, °C—Drying, °C, h604 h
Fabru PLA with wood fibers (wood filament)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, PLA with wood fibers (wood filament)6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2900 MPap. 1: Tensile modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 47 MPap. 1: Yield stress (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6.5 %p. 1: Elongation at break (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 5 %p. 1: Elongation at yield (ISO 527) | ISO 527 | listed under other properties |
| Density | 1.20 g/cm3p. 1: Density (ASTM D1505) | ASTM D1505 | |
| Melt mass-flow rate | 2.5-4.5 g/10minp. 1: MFR (ISO 1133) | ISO 1133 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-230 °C; Bed Nicht benötigt, 50 °C empfohlen; Drying 60 °C; 2-4 hFabru, PLA with wood fibers (wood filament)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Pitfalls and limitations
The filament is a little brittle (more than pure PLA), but robust enough to be delivered on spools.
Fabru, PLA with wood fibers (wood filament)p. 1 - Surface finish
The printed objects feel like wood.
Fabru, PLA with wood fibers (wood filament)p. 1 - Moisture sensitivity
Since wood absorbs a lot of moisture, it is advisable to always store the filament in an airtight packaging and to dry it again if necessary.
Fabru, PLA with wood fibers (wood filament)p. 1 - Odour and emissions
When printing, it also smells of wood.
Fabru, PLA with wood fibers (wood filament)p. 1 - Printing advice
Therefore, insert the filament carefully into your printer and take care not to introduce any tight radii or kinks in the filament.
Fabru, PLA with wood fibers (wood filament)p. 1
FormFutura EasyCorkStrength XY, MPa19.4Strength Z, MPa—Modulus XY, GPa1.05Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C0–60Chamber, °CnoneDrying, °C, hdry first
FormFutura EasyCorkFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet EasyCork™6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1050 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 19,4 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 15 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 46° C °Cp. 1: Viscat softening temp. | no standard stated | |
| Melting temperature | 160° C °Cp. 1: Melting termperature | no standard stated | |
| Density | 1.10 g/ccp. 1: Specific gravity ± | ISO 1183 | |
Print settings
- Nozzle
- 210–260 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- required, schedule not statedown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, EasyCork.
Its 2 print profiles, in the documents' words
- Nozzle ± 210 - 260° CFormFutura, Technical Data Sheet EasyCork™p. 1: Recommended printing settings
- Nozzle ± 210 – 250° C; Bed ± 0 – 60°C; Drying it is recommended to dry the material prior to usage and to 3D print it directly from a dry boxFormFutura, EasyCorkp. 1: General printing guidelines; Storage and handling
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Benefits
The gravimetric filling with relatively lightweight cork fibres means that EasyCork™ has extremely high volumetric cork filling properties, allowing you to 3D print beautiful objects with great cork-like aesthetics and cork-like properties such as being lightweight and impact resistant.
FormFutura, Technical Data Sheet EasyCork™p. 1 - Benefits
EasyCork™ has an excellent filament flowing behaviour allowing you to 3D print cork-like objects with high printing speeds.
FormFutura, Technical Data Sheet EasyCork™p. 1
3DJake ecoPLA WoodStrength XY, MPa24.6Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C35–60Chamber, °C—Drying, °C, h—
3DJake ecoPLA Wood3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE ecoPLA Wood5 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 369.993 MPa (TDS prints "369,993" with European decimal separator)physically implausiblep. 1: E-Modulus | ISO 527 | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 24.617 MPa (TDS prints "24,617" with European decimal separator)p. 1: Tensile strength at Yield | ISO 527 | in the median |
| Elongation at break orientation not stated | 23.824 % (TDS prints "23,824" with European decimal separator)p. 1: Strain at break | ISO 527 | in the median |
| Density | 1,1128 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 5,36 g/10 minp. 1: MFR 210 °C/2,16kg | moulded bar (resin supplier's value), ASTM D1238As the sheet prints it: 210 °C/2 16kg D-1238 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed If you have a heated bed the recommended temperature is ± 35-60˚C3DJake, Technical Data Sheet 3DJAKE ecoPLA Woodp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE ecoPLA Wood can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE ecoPLA Woodp. 1
FormFutura EasyWoodStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg115Nozzle, °C200–240Bed, °C50–60Chamber, °C—Drying, °C, h—
FormFutura EasyWoodFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet EasyWood™10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1930 Mpap. 1: Tensile modulus | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 71 Mpap. 1: Tensile strength | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 171 %p. 1: Elongation at break | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 2583.9 Mpap. 1: Flexural modulus ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 59.6 Mpap. 1: Flexural strength ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Impact strength, test unclear | 7.1 KJ/m²p. 1: Impact strength | no standard statedWhich test: cannot tell | listed under other properties |
| Vicat softening temperature | 46° C °Cp. 1: Viscat softening temp. | ISO 306 | |
| Melting temperature | 145 ± 10° C °Cp. 1: Melting termperature | no standard stated | |
| Density | 1.20 g/ccp. 1: Specific gravity | ASTM D1505 | |
| Melt mass-flow rate | 4.5 g/10minp. 1: Melt flow rate | no standard stated | |
Print settings
- Nozzle
- 200–240 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, EasyWood.
Its 2 print profiles, in the documents' words
- Nozzle ± 200 - 240° CFormFutura, Technical Data Sheet EasyWood™p. 1: Recommended printing settings
- Nozzle ± 190 – 240° C; Bed ± 50 – 60° CFormFutura, EasyWoodp. 1: General printing guidelines
Price
115 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- MakerWiz: 130 CAD/kgFormfutura EasyWood Filament - Olive - 500g / 1.75mm (SKU 62501105)in its price; seen 30 Sep 2026
- DigitMakers: 100 CAD/kgFormFutura EasyWood - 1.75mm 500g - Various Colors / Birch (SKU FFTRA-EWOD-175BRCH-00500)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (19)
- Surface finish
EasyWood™ looks, feels and smells like real wood.
FormFutura, Technical Data Sheet EasyWood™p. 1 - Surface finish
You can obtain a beautiful wood-nerve structure in your EasyWood™ printed objects by grinding it a little bit with a piece of fine grit sandpaper.
FormFutura, Technical Data Sheet EasyWood™p. 1 - Surface finish
EasyWood filament is perfect for 3D printing objects with real wood-like aesthetics, smell and touch.
FormFutura, EasyWoodp. 1 - Surface finish
EasyWood looks, feels and smells like real wood.
FormFutura, EasyWoodp. 1 - Surface finish
A beautiful wood-nerve structures can be obtained by grinding the printed object with a piece of fine grit sandpaper.
FormFutura, EasyWoodp. 1 - Surface finish
Alternatively the same result can be obtained by varying the print temperature during the printing process.
FormFutura, EasyWoodp. 1 - Warping and shrinkage
The wood particles in the filament have the added benefit of warp-free printing.
FormFutura, EasyWoodp. 1 - Surface finish
Real wood feel, look and smell
FormFutura, EasyWoodp. 1 - Benefits
Very easy to print
FormFutura, EasyWoodp. 1 - Warping and shrinkage
Warp-free printing and no deformation after cooling
FormFutura, EasyWoodp. 1 - Benefits
Great thermal stability and filament flowing behaviour
FormFutura, EasyWoodp. 1 - Adhesion between layers
Perfect first- and inter-layer adhesion
FormFutura, EasyWoodp. 1 - Printing advice
Can be printed at high printing speeds
FormFutura, EasyWoodp. 1 - Surface finish
By postprocessing the printed object with a piece of fine grit sandpaper
FormFutura, EasyWoodp. 1 - Surface finish
By varying with the print/extrusion temperature
FormFutura, EasyWoodp. 1 - Benefits
Biodegradable
FormFutura, EasyWoodp. 1 - Printing advice
When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle.
FormFutura, EasyWoodp. 1 - Printing advice
This will make sure that any potential fillers are flown out of your nozzle.
FormFutura, EasyWoodp. 1 - Printing advice
It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.
FormFutura, EasyWoodp. 1
Nanovia PLA WoodStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C60–70Chamber, °C20Drying, °C, h504 h
Nanovia PLA WoodNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanovia2 valuesUnless a row says otherwise: specimen not stated | |||
| Glass transition temperature | 52 °Cp. 1: Tg | no standard stated | in the median |
| Density | 1.13 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 50 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed 60 – 70 °C; Chamber 20 °C; Drying Dehydrate for 4h at 50°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanoviap. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle (minimal)
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
Its dotted light brown aspect and textured surface make Nanovia PLA Wood an ideal filament for the 3D printing of toys, statues, and interior decorations.
Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanoviap. 1 - Benefits
Biosourced and biodegradable
Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanoviap. 1 - Surface finish
Much like normal wood, the printed parts can be stained thanks to the wood powder’s porosity and high concentration.
Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanoviap. 1 - Nozzle wear
PLA Wood prints like a regular PLA without a heated enclusure, does not require a réinforced nozzle
Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanoviap. 1 - Odour and emissions
During the printing process it emenates a strong pine wood scent.
Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanoviap. 1 - Printing advice
we do recomment however using a nozzle of more than 0.5 mm diamter.
Nanovia, Nanovia PLA Wood : 40 % vol. pine compound : Nanoviap. 1
eSUN WoodStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg39Nozzle, °C210–230Bed, °C60Chamber, °C—Drying, °C, h—
eSUN WoodeSUN
Modified: lightweight additive. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Wood Technical Data Sheet2 values | |||
| HDT | 45 °Cp. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 0.7 g/cm3p. 1: Density GB/T 1033 | GB/T 1033 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-230℃; Bed 60°CeSUN, Wood Technical Data Sheetp. 2: Recommended printing settings; p. 2: Based on
Price
39 CAD/kgits one regular price in the sample
1 listing
- Shop3D.ca: 39 CAD/kgeSun Wood Filament - 1.75mm - 1KG (SKU PLA-Wood175O-PW1TZ1)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (6)
- Good for
Aeromodelling
eSUN, Wood Technical Data Sheetp. 1 - Benefits
Easy to print as PLA
eSUN, Wood Technical Data Sheetp. 1 - Surface finish
This is a PLA based 3D printing material with cool appearance like wood.
eSUN, Wood Technical Data Sheetp. 1 - Surface finish
Easy to paint.
eSUN, Wood Technical Data Sheetp. 1 - Pitfalls and limitations
It tilize active foaming technology to achieve like-wood appearance,which is hard to avoid stringing problem.
eSUN, Wood Technical Data Sheetp. 2 - Printing advice
Try to down the extruder temperature.
eSUN, Wood Technical Data Sheetp. 2
iSANMATE PLA WoodStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C35–60Chamber, °CnoneDrying, °C, h605 h
iSANMATE PLA WoodiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PLA Wood Filament Technical Data Sheet4 valuesUnless a row says otherwise: specimen not stated | |||
| Melting temperature | 165.5 ℃p. 1: Melt Point DSC ℃ | DSC | |
| Melting temperature | held back: the sheet's unit or table layout is unclearheld backp. 2: Melt Temperature | no standard stated | |
| Density | 1.22-1.32 g/cm3p. 1: Specific Gravity ISO 1183 23℃ g/cm3 | ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 2.0-6.0 g/10minp. 1: Melt Flow Rate ISO 1133 190℃, 2.16 kg g/10min | ISO 1133As the sheet prints it: 190℃ 2.16 kg ISO 1133 | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 5 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Drying Effective drying takes place at 60°C for 5 hours.iSANMATE, PLA Wood Filament Technical Data Sheetp. 2: Drying note
- Nozzle 200-220 ℃; Bed 35-60 ℃; Chamber unnecessaryiSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1: Parameter Information; Product Description (nozzle size); p. 1: Heated Chamber
Price
Not in the price sample.
Its 3 documents
What the maker says (19)
- Moisture sensitivity
Storage time is not suggested to be over 12 months under proper conditions in an unopened bag, the product should be used as soon as possible when the package is opened.
iSANMATE, PLA Wood Filament Technical Data Sheetp. 1 - Moisture sensitivity
Well packaged products can be used directly.
iSANMATE, PLA Wood Filament Technical Data Sheetp. 2 - Moisture sensitivity
Moisture levels above 1000 ppm may affect operation; Effective drying takes place at 60°C for 5 hours.
iSANMATE, PLA Wood Filament Technical Data Sheetp. 2 - Odour and emissions
The processing area should be well ventilated, as during processing the materials might emit fumes containing decomposing substances, which may be irritating.
iSANMATE, PLA Wood Filament Technical Data Sheetp. 2 - Benefits
iSANMATE PLA wood filament has been updated with a new formulation that allows for better printing and more realistic wood textures.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Surface finish
iSANMATE PLA Wood Filament is a kind of PLA Filament with Wood grain texture.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Surface finish
It has more natural appearance and texture than ordinary PLA Filament.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Surface finish
This new and updated formulation gives the iSANMATE PLA Wood Filament an even better printing effect, allowing for a more realistic Wood texture.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Printing advice
Heated Chamber unnecessary
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Surface finish
Natural wood texture, comfortable surface, with wood smell during printing
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Odour and emissions
with wood smell during printing
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Warping and shrinkage
Low shrinkage, not easy to draw
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Benefits
High density, high strength, not easy to deform
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Benefits
Environmental protection, no pollution, biodegradable
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Good for
Applicable to all models of FDM3D printers, it is suitable for printing models with wooden effects, such as portraits, small Furniture ornaments, etc.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Precision and tolerance
Keep the stable tolerance in +/-0.03mm, no clogging and ensure the great 3D printing effect.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Good for
Our PLA wood filament 1.75mm works for 99% FDM 3D printers &3D pens.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Moisture sensitivity
100% Vacuumed packaging—Some 3D printing materials can be negatively affected by moisture, that’s why 3D printer filament made by us is vacuumed sealed along with a desiccant pack.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1 - Moisture sensitivity
This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust and dirt before opening the vacuumed sealed packing.
iSANMATE, iSANMATE High Performance PLA Wood 3D Printer Filament Box woodp. 1
No product matches "".
Values are for the colour each sheet tested; pigment can change them.